Hey all,
I’ve heard that the Rezound is impossible to brick, but all I can guess is that I managed to do the impossible.
I bought a used Rezound a month or so ago. The previous owner had already rooted it and upgraded it to ICS – I honestly wasn’t happy he did this and didn’t mention it in his listing; I just wanted a stock phone and didn’t want to mess with rooting. I didn’t know exactly what he had done to it, so my idea was to reflash it myself, so I knew exactly what was on the phone. Battery life and overheating had been a real problem with the phone, so I was suspecting he might have done something to cause it, so I wanted to rule that out before concluding it was a hardware issue.
ANYWAY – I used cwm, backed everything up, wiped the phone’s memory, then booted back into recovery mode to flash the new ROM. I was able to pick the new ROM and get the process started. It worked its way through the process, rebooted, then sat on the intro screen for-ever. No matter how long I let it sit, it would not complete the install. At that time, I was able to boot back into recovery mode, at which point I cleaned out all the data caches, wiped it as clean as I could, and then tried to repeat the install. Eventually, I used every option in recovery mode and nothing made a difference – I never managed to get the phone working again.
In my last effort, I left the phone on overnight, figuring I’d give it all the time I could to sort itself out, settle into the new ROM, etc. NOW, the battery is dead and the phone won’t charge it. If I remove the battery, put it back in, and plug it in, the charge light goes on for about 5 seconds and then turns back off. At this point, the phone is completely dead.
Do I have any options at this point? Or am I just pretty much SOL?
And no, I don’t know WTF I’m doing, clearly the main issue is probably typing on the keyboard right now. Any help is appreciated.
phermes1 said:
Hey all,
I’ve heard that the Rezound is impossible to brick, but all I can guess is that I managed to do the impossible.
I bought a used Rezound a month or so ago. The previous owner had already rooted it and upgraded it to ICS – I honestly wasn’t happy he did this and didn’t mention it in his listing; I just wanted a stock phone and didn’t want to mess with rooting. I didn’t know exactly what he had done to it, so my idea was to reflash it myself, so I knew exactly what was on the phone. Battery life and overheating had been a real problem with the phone, so I was suspecting he might have done something to cause it, so I wanted to rule that out before concluding it was a hardware issue.
ANYWAY – I used cwm, backed everything up, wiped the phone’s memory, then booted back into recovery mode to flash the new ROM. I was able to pick the new ROM and get the process started. It worked its way through the process, rebooted, then sat on the intro screen for-ever. No matter how long I let it sit, it would not complete the install. At that time, I was able to boot back into recovery mode, at which point I cleaned out all the data caches, wiped it as clean as I could, and then tried to repeat the install. Eventually, I used every option in recovery mode and nothing made a difference – I never managed to get the phone working again.
In my last effort, I left the phone on overnight, figuring I’d give it all the time I could to sort itself out, settle into the new ROM, etc. NOW, the battery is dead and the phone won’t charge it. If I remove the battery, put it back in, and plug it in, the charge light goes on for about 5 seconds and then turns back off. At this point, the phone is completely dead.
Do I have any options at this point? Or am I just pretty much SOL?
And no, I don’t know WTF I’m doing, clearly the main issue is probably typing on the keyboard right now. Any help is appreciated.
Click to expand...
Click to collapse
Well, not sure about the installation issues...but the reason the phone died is because you have CM recovery. Known issue .. probably a hundred threads just not recently because people have either switched or don't let their phone run down. Phone can't charge from CM recovery and you need to switch back to Amon Ra recovery. http://forum.xda-developers.com/showthread.php?t=1434532
Basically, pull battery and then replace and hold volume down and power at the same time to boot into bootloader. Plug phone into computer . Put Amon recovery img into the same folder containing fastboot. Then make sure phone is in fastbootUSB . http://forum.xda-developers.com/showthread.php?t=1339679&highlight=amon+ra
Latest is 3.15 .. so once it is placed in the right folder type fastboot flash recovery recovery-ra-vigor-3.15-gnm.img ... this will flash amon ra recovery.. then you can charge. Once charged then you can attempt to recover your rom.
Sounds like you need an external charger to get the battery a little juice. I never thought that it was possible for a battery to not be able to charge because it was super dead unit I saw it happen on a Thunderbolt. You could take the battery to Verizon and have them give it a quick charge, just to get you back on your feet or got to an electronics store and buy a charger (can always take it back). Get it to boot again then work it from there maybe flash the Stock or Leaked PH98IMG just to get back to working so you can breath again..
Getting yourself out of a jam is part of the learning curve in flashing phones.
Yep, known problem with CWM. Plug it in powered off for a long time. It might not seem like it is charging, but it is, very little.
What ROM did you flash?
Also need to know the firmware version.
Once you get into hboot, tell us what radios you have and what version of hboot. You have three options, 2.11, 2.21, and 2.25. Also tell us if it has S-On or S-Off.
All of this is crucial for us to help you get back to stock.
Great, thank you for the good info! I was about ready to toss the thing in the trash, but it sounds like there may be hope yet!
EmerikL said:
Yep, known problem with CWM. Plug it in powered off for a long time. It might not seem like it is charging, but it is, very little.
What ROM did you flash?
Also need to know the firmware version.
Once you get into hboot, tell us what radios you have and what version of hboot. You have three options, 2.11, 2.21, and 2.25. Also tell us if it has S-On or S-Off.
All of this is crucial for us to help you get back to stock.
Click to expand...
Click to collapse
I'll have to get back to you on all of that - I'm not entirely sure right now, and everything is at home. Pretty sure it was a Venasaur ROM.
I wish the mods would delete any and all links to CWM. These threads keep cropping up.
its possible you need to flash the ICS firmware patch as well and thats why its not booting
Sorry to hassle you guys with what has probably already been answered a few times. I did some searching – yes, I should have done a little more - and the results I found were all folks that had phones that would still power on to some degree. I didn’t find many where the phone was completely dead, and if I did the responses were generally, “You’re screwed, throw it out.” Issues with cwm really didn’t cross my mind, so I didn’t think to search on that.
Anyway, I appreciate the help. I’ll sit down tonight and see if I can’t figure this thing out.
It is likely that he is S-ON and if he had a sense 4 rom installed, the new rom won't boot.
To the OP, can you please tell us the hboot version # (2.xx) it is either 2.10, 2.11,2.21, or 2.25. Also tell us if it says S-ON or S-OFF and unlocked, locked, or relocked, or juponutbear in purple at the top.
Easiest way to brick it is to take out battery while flashing a hboot haha.
No worries about the question, we're glad to help (since you didn't post this in the Development section lol)
Anyway, as long as you are S-ON, it shouldn't be too bad of a process, just lengthy. First, you'll need the Android SDK so you can get Fastboot, etc, as well as all the HTC device drivers installed, and you'll need to flash Amon RA recovery over.
Amon RA can be found here:
http://forum.xda-developers.com/showpost.php?p=23781936&postcount=428
**Make sure the Recovery file is in .img format, not .zip or anything, and place in the same folder as Fastboot (which is located in the Android SDK folder).**
You'll need to pull the battery, plug the USB cable into the computer, plug into the phone, replace battery, and hold down 'Power' + 'Volume Down' until the screen flashes the HTC screen. (Not sure if that's the only order, but it works). This will take you into Fastboot.
Next, you'll need to open a command prompt and 'cd' to your folder with Fastboot in it. Type:
Code:
fastboot flash recovery recovery-ra-vigor-3.15-gnm.img
into the command prompt and hit enter. It should show on the command prompt a couple lines of time it took, etc. and when done you will have Amon RA recovery.
Now you will at least be able to charge your phone!! From the phone, you can select 'Bootloader' then 'Recovery' and you will boot into recovery, which will allow you to charge your battery. You can check the charge status of the battery while in recovery in one of the menus, can't remember which one. (Fun tip: you can use 'Home'/'Menu' to scroll up/down, 'Back' to go back and 'Search' to select, since the hardware buttons are so difficult to press)
Once you get the phone charged, you have a couple of options. Since you stated you wanted to go to stock, I'll explain the steps to get back to the state the phone shipped with.
Once you get a good charge, you will also need to re-lock the bootloader to go back to stock, which is also done in fastboot by typing:
Code:
fastboot oem lock
(Get to fastboot by Battery Pull>Battery Put Back>Power + Volume Down, all while connected to a computer, just like when doing the Recovery flash)
BACK TO STOCK::
You can do this one of two ways, either run the revert using a .zip, or as a .exe connected to your computer. Personally, (and I know I'll probably lose credibility here lol) I prefer the .zip method, although many swear by the 'True RUU' .exe method.
**Here's a little aside to get you so you can get all of these files onto your phone. There's an option in Amon RA that mounts as removable storage to your computer so you can transfer files. Select 'USB-MS toggle' and then select 'USB-MS Toggle SDCard'. Then you can transfer all the files you need before continuing.
First, download the stock "ruu" zip from here:
http://goo.im/stock/vigor/ruu/RUU_V..._1.12_9k_1.83_V_APT_release_221502_signed.zip
and you will need to rename it to PH98IMG.zip and it will need to be placed on the root of your SDCard, not in any folder. Then download the MainVer.zip from here:
http://forum.xda-developers.com/showpost.php?p=23169557&postcount=4\
which can be placed anywhere on the SDCard, but I would place it in the same place as the PH98IMG file for ease.
Once you have the PH98IMG file on the root of the SDCard, and have the MainVerLow zip there also, continue on.
To flash, go to the 'Flash zip' menu in recovery, and locate the setMainVerLow.zip. All this does is set the Main Version low, so hboot (or whatever) doesn't kick it back saying you can't downgrade. This flash will only take a second, and when complete, go back to the main Recovery menu.
It probably doesn't matter, but I would wipe data/factory reset again just to be safe. Do this by selecting 'Wipe' then 'Wipe ALL data/factory reset'. Once done, go back to the main Recovery screen.
Now you will want to reboot into bootloader, which I believe is under either 'Other' or 'Developer Options'
The phone will reboot, and book back into a screen similar to what you saw in fastboot. Some purple text will scroll saying stuff about looking for some file, and will find the one you just put on there and ask if you want to update now. Click the power button to confirm the update. It will show a progress bar on the side, as well as list the parts it has updated for you. It will get around halfway done or so and reboot itself, but DON'T TOUCH ANYTHING OR REMOVE THE BATTERY!!! lol it will reboot and finish the second half of the install. Once it's done, I think you need to hit 'Power' one more time to reboot, but once it does you will be rebooted and load up the completely stock ROM that originally shipped with the Rezound. Of course, from here you can go to the system update menu and update to the latest released OTA.
EDIT:: Just wanted to add, none of what I have written was developed/discovered/first-posted by me, it is the work of other, MUCH more intelligent people other than myself. So don't thank me for anything other than putting them all here lol
con247 said:
It is likely that he is S-ON and if he had a sense 4 rom installed, the new rom won't boot.
To the OP, can you please tell us the hboot version # (2.xx) it is either 2.10, 2.11,2.21, or 2.25. Also tell us if it says S-ON or S-OFF and unlocked, locked, or relocked, or juponutbear in purple at the top.
Click to expand...
Click to collapse
Will try to do that tonight.
I need to get it to power up first. I've had it plugged in at my desk all day and no luck so far. Let me get that taken care of and I'll go from there.
See if you can borrow a friends battery. A thunderbolt or my touch 4g slide battery will work too. You can also manually charge your battery by wiring a USB cable directly to it. Then you can get rid of the broken recovery and charge the battery fully.
good luck.. if you figure all this out you might like being rooted. i had several issues coming from an htc incredible to rezound the cwm was one.
Definitely get Amon Ra.
Sent from my ADR6425LVW
con247 said:
You can also manually charge your battery by wiring a USB cable directly to it. Then you can get rid of the broken recovery and charge the battery fully.
Click to expand...
Click to collapse
OK, that looks interesting. How do I do that?
EDIT - NEVER MIND - just found it.
phermes1 said:
OK, that looks interesting. How do I do that?
EDIT - NEVER MIND - just found it.
Click to expand...
Click to collapse
might be worth your while:
http://www.amazon.com/HTC-Thunderbo...ords=htc+thunderbolt+external+battery+charger
It doesn't charge very fast, but nice to have around.
Hopefully im not too late, but click my name and look at the threads that i have started. I used a ghetto IMO method to charge a dead droid x battery. You njeed a useless usb cable and a little time. Basically you strip the red and black wires and respectively touch them to the + and - leads on your battery. This will charge it relatively fast, you only need to hold it on the battery for a minute or so, just long enough.
But use this as a last plan method, i dont know how safe this is because the voltages may go in wrong or damage the battery, but to this day my droid x still works and i got it on the release week so its relatively old.
If you can, you should get a legit charger instead but if you want it done fast, give this a try or find another way. hope i helped but just make sure that if the battery heats up if you try this, you stop immediately. That could mean that the battery is about to explode or its breaking.
hope i helped, but if you want more help there is bound to be youtube videos on how to do this.
If you try this and something goes wrong its not my problem, but i have done this before and it should work.
Here is the link to the forum i made:
http://forum.xda-developers.com/showthread.php?t=1656547
Yakuzagang5 said:
No worries about the question, we're glad to help (since you didn't post this in the Development section lol)
Anyway, as long as you are S-ON, it shouldn't be too bad of a process, just lengthy. First, you'll need the Android SDK so you can get Fastboot, etc, as well as all the HTC device drivers installed, and you'll need to flash Amon RA recovery over.
Amon RA can be found here:
http://forum.xda-developers.com/showpost.php?p=23781936&postcount=428
**Make sure the Recovery file is in .img format, not .zip or anything, and place in the same folder as Fastboot (which is located in the Android SDK folder).**
You'll need to pull the battery, plug the USB cable into the computer, plug into the phone, replace battery, and hold down 'Power' + 'Volume Down' until the screen flashes the HTC screen. (Not sure if that's the only order, but it works). This will take you into Fastboot.
Next, you'll need to open a command prompt and 'cd' to your folder with Fastboot in it. Type:
Code:
fastboot flash recovery recovery-ra-vigor-3.15-gnm.img
into the command prompt and hit enter. It should show on the command prompt a couple lines of time it took, etc. and when done you will have Amon RA recovery.
Click to expand...
Click to collapse
Update on my efforts. The steps above are where I'm currently at - so I haven't gotten far.
I got the $5 charger as suggested, so my phone will power on and I can at least get to the bootloader screen.
For whatever reason, it will NOT power on if I follow the steps above. It won't power up when I have it plugged into the PC. I can only power it on with it unplugged. So, when I run through the command prompt to install Amon Ra, it seems to be unable to connect to the phone. It displays 'Waiting for device' and nothing ever happens. At this point, it looks like I have everything I need on the PC side, but the phone is too boogered up to communicate with it.
I'm trying the options to clear out the memory right now. The problem there is that it goes to the screen with the top hat and orange circular arrow, and just sits there forever. It never acknowledges that it's done clearing memory.
Related
While trying to install a new rom on my droid eris i used rom manager to backup and install from my SD card.
IT said everything went fine, however when the phone rebooted I got stuck in the Nexus boot loaded screen. I do have a past nandroid back up..
but here is the problem. I only have the android system recovery, and my trackball will not allow me to scroll down past "reboot system now" does anyone have any suggestions on how I could possibly fix this?
The trackball issue is probably Independent what you can do is take your eris, put it face down on a piece of paper and move the whole phone rolling it on the trackball do it in figure eights like 10 or 15 times, then see if that fixes the trackball issue.
As far as the phone itself. If you used rom manager, correct me if I am wrong, but that means you used clockwork mod recovery right? Clockwork has had a history of bricking Droid Eris devices. It doesn't sound like its completely dead but it is a definite possibility.
Try the trackball solution and get back to us and let us know if that fixed the scrolling, let us know if the previous nandroid worked. And uh, did you happen to take the next step and go s-off on your bootloader so you have access to fasboot? The way to check that is hold power and volume down when turning it on and it should say in the upper right S-on or S-off.
Edit: Also if the trackball thing doesn't work, people have had success in getting the trackball to move down by lightly pushing a plugged in USB cable toward the back of the device, not too hard, but gentle. In addition if none of this works, but while in H-boot mode (as discussed previously, vol-down + power) you can get the device recognized by your computer, an official RUU, which is an application that runs from your computer that basically rebuilds your phone from scratch to stock. Then start over with rooting and such. And I'd advice you to get the SDK and go it alone from here because honestly, its not difficult and the more intermediary programs you introduce the more issues you open yourself up to.
Let us know, and if I sound condescending at all, please err on the side of positive interpretation, I just had a cruddy night and chipped the heck out of my back tooth and I'm tired, so no offense intended.
Edit 2: Lulz, I just realized that Its been so long since I've used the stock android recovery, but did you try the volume up and volume down buttons to navigate and the send button to select? Either way, if its the stock recovery I don't believe you will be able to load a nandroid backup, so the RUU is probably your only option.
I really suck at installing custom ROMs.
I hard bricked because of low battery while flashing (I think, screen won't turn on, green light only comes on when plugged into a computer with no battery in, and a couple of posts I read made it sound like I'm screwed). So I'm going to AT&T tomorrow and hopefully getting a new phone. My main question is...
Can someone point me in the direction of a very comprehensive guide to installing a custom ROM on a stock Atrix brand new from the store?
I have poured over these forums for five days obsessively trying to figure out why I am so stupid and can't make it work, and have probably tried ten different methods of everything to get it to work, hoping that one of them had whatever I was missing already taken care of.
I rooted and unlocked my bootloader just fine. Even installed the Gingerblur rom (but that's a P-ROM right?). I think my problem is the custom recovery. Yes I deleted the recovery_install file. I tried flashing tenfar's CWM (the newest one I think, I sideloaded a different one to get Gingerblur) with fastboot but it said something like "flash:recovery is not a known command." (Sorry I don't remember completely, this was very early this morning before I went to sleep) I thought at the time that once you unlocked the bootloader you didn't have to do it again, but I read a thread an hour ago that said you just have to flash the unlock image after an RSD reset. So I was going to try to re-unlock, then try and flash with fastboot. Unfortunately I never got to try.
I am sorry for my obnoxiously long post, but I figured the more info I gave the higher chance there would be that someone could point at the obvious for me.
Thanks for your time.
when you plug the phone to wall-charger...wt happens?..do you see anything on the screen..
No. Also nothing happens when I press the power button. The green light ONLY comes on when I plug it into my computer with no battery, not when I plug it into an outlet.
Not entirely the right person to give advice but I guess it's worth a shot trying.
I'm a bit confused as to what you actually did. You're rooted and unlocked (100% sure on this?) Had gingerblur installed (guessing you were unlocked on 1.8.3?) and then wanted to install CMW, correct?
From the error you got you probably didn't cd (folder fastboot is in) flash fastboot recovery (path of recovery-en-goapk.img). Deleting the stock Android recovery folder most likely left you without any recovery. (Someone correct me if I'm wrong )
Entirely sure NOTHING happens while being plugged in into a computer? Can you get into fastboot at all? When connected via USB, does RSD show your device?
xscottishx27 said:
Not entirely the right person to give advice but I guess it's worth a shot trying.
I'm a bit confused as to what you actually did. You're rooted and unlocked (100% sure on this?) Had gingerblur installed (guessing you were unlocked on 1.8.3?) and then wanted to install CMW, correct?
From the error you got you probably didn't cd (folder fastboot is in) flash fastboot recovery (path of recovery-en-goapk.img). Deleting the stock Android recovery folder most likely left you without any recovery. (Someone correct me if I'm wrong )
Entirely sure NOTHING happens while being plugged in into a computer? Can you get into fastboot at all? When connected via USB, does RSD show your device?
Click to expand...
Click to collapse
The screen will not turn on. Nothing, no moto symbol, nothing. I did cd, I got an interface, fastboot said it was going to install a recovery, but then it failed, and that is the message the phone gave me. I was rooted, because I had superuser. I WAS unlocked,, because it had said unlocked on boot, though not at the time of fastboot, but then I used rsd after I was stuck in boot after trying to install a custom rom. After that it didn't say unlocked, so I unlocked again, and while doing so it said I was already unlocked. I failed to install a custom rom again with the same result, so I rsd'ed again back to 1.2. I never unlocked after that because I figured I didn't need to. I tried to install a custom rom many times with pretty much the same result after trying several different things, including flashing CWM with fastboot. Then I read that I had to re unlock after RSDing, so I was in the process of that when my screen shut off in the middle of it. I assume it didn't have enough charge and died (or that is what it sounds like according to what I have read)
mediocrepiracy said:
The screen will not turn on. Nothing, no moto symbol, nothing. I did cd, I got an interface, fastboot said it was going to install a recovery, but then it failed, and that is the message the phone gave me. I was rooted, because I had superuser. I WAS unlocked,, because it had said unlocked on boot, though not at the time of fastboot, but then I used rsd after I was stuck in boot after trying to install a custom rom. After that it didn't say unlocked, so I unlocked again, and while doing so it said I was already unlocked. I failed to install a custom rom again with the same result, so I rsd'ed again back to 1.2. I never unlocked after that because I figured I didn't need to. I tried to install a custom rom many times with pretty much the same result after trying several different things, including flashing CWM with fastboot. Then I read that I had to re unlock after RSDing, so I was in the process of that when my screen shut off in the middle of it. I assume it didn't have enough charge and died (or that is what it sounds like according to what I have read)
Click to expand...
Click to collapse
sounds like hard brick bro...
You need to find a way to charge your battery. It sounds like your battery is dead. Try to find a someone with the same phone as you.
Sent from my MB860 using XDA Premium App
To charge your battery,
Take ANY USB cable and cut one end of it off.
Strip the outer layer and strip the Black and red wires exposing the wire itself.
Starting with the black wire, tape that end to the NEGATIVE sign on the battery
Then take the red wire and tape it to the POSITIVE side of the battery.
Make sure you check it every few minutes so it does not over heat because it WILL get hot due to no regulations
I would charge it for approximately 30 min or so then put the battery back into your phone and boot it up
AND NO YOU DID NOT HARDBRICK BECAUSE YOU DID NOT HAVE HAVE THE RIGHT CWM IN ORDER TO FLASH THE OTA THAT WOULD CAUSE YOU TO HARDBRICK IF GOING BACKWARDS
ClearFire said:
To charge your battery,
Take ANY USB cable and cut one end of it off.
Strip the outer layer and strip the Black and red wires exposing the wire itself.
Starting with the black wire, tape that end to the NEGATIVE sign on the battery
Then take the red wire and tape it to the POSITIVE side of the battery.
Make sure you check it every few minutes so it does not over heat because it WILL get hot due to no regulations
I would charge it for approximately 30 min or so then put the battery back into your phone and boot it up
AND NO YOU DID NOT HARDBRICK BECAUSE YOU DID NOT HAVE HAVE THE RIGHT CWM IN ORDER TO FLASH THE OTA THAT WOULD CAUSE YOU TO HARDBRICK IF GOING BACKWARDS
Click to expand...
Click to collapse
If this works I will give you many thanks, and my firstborn child.
It didn't work. Walked into an AT&T store and said "It broke, I don't know what to do" and they gave me a new one under manufacturers warranty. I am going to try again, but if someone could point me towards a comprehensive guide that may be able to solve my problems, I would be appreciative.
I figured out my issue with not being able to install custom recovery, it was the fact that I hadn't unlocked again after flashing an sbf. I am now running Aura ROM, and so far I've been geeking out nonstop. Thanks everyone who tried to help me.
Think you've broken your phone? Read this to return it back to normal.
I've seen a lot of questions about people accidentally screwing up their phones or doing something similar around here and on the OG Evo forums. This thread is for those of you who want to return it back to normal. This is also useful to redirect people to if they have those questions.
If your phone won't start up at all and the LED won't light up at all when it is plugged in:
-Take out battery and put it back in
-If that doesn't work, swap out a battery with one you know works
-If that doesn't work, take out the SD card and try again
*If taking out the SD card fixed it, your SD card is bad and you need a new one.
-If that doesn't work or you know it isn't the battery or SD card, your phone is probably bricked.
If your phone doesn't start up but a red LED blinks when you plug it in:
*Download Android ADB Files if you don't already have them
-Plug your phone in to your computer. With a terminal/cmd, navigate to /android-sdk-(OS You're Using)/platform-tools and type "adb reboot"
-If that doesn't start up your phone, try the steps before except this charge your battery or replace with a working battery
*If your phone doesn't get get past the HTC splash screen, use "adb reboot bootloader" instead of "adb reboot" so you reboot into bootloader.
If your phone starts up but gets stuck at the HTC splash:
-Go into bootloader with vol-down+power and go to recovery. Wipe everything and then flash a ROM or backup from there that you know has worked before
-If that doesn't work, flash this from bootloader: http://forum.xda-developers.com/showthread.php?t=1193540
-If you can't access your SD card, replace it with a working one
If your phone won't go into recovery:
-Flash the TWRP PG86IMG through bootloader again:
http://forum.xda-developers.com/showthread.php?t=1192077
-If that doesn't work, try the S-OFF tool again and reflash the recovery
-If that doesn't work, try putting back S-on (download fastboot and type "fastboot oem writesecureflag 3" or "fastboot oem lock" into cmd/terminal) and then flashing PG86IMG. Then try S-offing again and flashing the recovery.
If your phone won't get past the boot animation:
-Go into bootloader with vol-down+power and go to recovery. Wipe everything and then flash a ROM or backup from there that you know has worked before
If your phone gets bootloops:
-Pull the phones battery and put it back in, then:
Go into bootloader with vol-down+power and go to recovery. Wipe everything and then flash a ROM or backup from there that you know has worked before
-If that doesn't work, flash this from bootloader: http://forum.xda-developers.com/showthread.php?t=1193540
If anything else strange is happening to your phone:
-Reboot phone
-If that doesn't work, wipe data and go back to a working ROM/Recovery
-If that doesn't work, flash the PG86IMG RUU:
http://forum.xda-developers.com/showthread.php?t=1193540
If you want more accurate instructions on how to fix a problem, ask in this thread.
It's nice that you're trying to help people out, but I'm sure that everyone does all this anyway when they have seemingly unfixable problems lol
freeza said:
It's nice that you're trying to help people out, but I'm sure that everyone does all this anyway when they have seemingly unfixable problems lol
Click to expand...
Click to collapse
Ure right, but this could help some noobs. Should be sticky imo.
- Coz i just saw it in 3D with the Shooter -
dashrink said:
Ure right, but this could help some noobs. Should be sticky imo.
- Coz i just saw it in 3D with the Shooter -
Click to expand...
Click to collapse
Yeah it should definitely be a sticky. Surprising even with all this information all the n00bs still ask the same damn questions about stuff that has been posted here time and time again
I have HBOOT 1.5 and suffering from stucking at splash screen. In fact, before stuck at splash screen, I did not tried to s-off, rooted, and flash any roms. Just a fully reboot result in stuck at splash screen. I have tried every method you mentioned above, just stuck at the splash screen:-(
I googled all the world, and someone said maybe eMMC chip damaged? It is happened on EVO 4G, but maybe also on EVO 3D? I hope it is not true, I always hope my situation is just a soft brick, anyone can tell me if it is possible brick the phone( stuck at the splash screen) due to eMMC chip damaged? Thanks in advance!
freeza said:
It's nice that you're trying to help people out, but I'm sure that everyone does all this anyway when they have seemingly unfixable problems lol
Click to expand...
Click to collapse
Heh, you'd be surprised with all the threads about people asking how to fix their phone after 'x' happened.
subaochen said:
I have HBOOT 1.5 and suffering from stucking at splash screen. In fact, before stuck at splash screen, I did not tried to s-off, rooted, and flash any roms. Just a fully reboot result in stuck at splash screen. I have tried every method you mentioned above, just stuck at the splash screen:-(
I googled all the world, and someone said maybe eMMC chip damaged? It is happened on EVO 4G, but maybe also on EVO 3D? I hope it is not true, I always hope my situation is just a soft brick, anyone can tell me if it is possible brick the phone( stuck at the splash screen) due to eMMC chip damaged? Thanks in advance!
Click to expand...
Click to collapse
I guess something hardware related could only be the case then. If you've tried everything you could, that is probably the case. Go to sprint and tell them something happened during an OTA. (IK it is hardware related, but that will still get you a better chance of them replacing it)
If you want to have S-On for when you take it back to sprint, open up a terminal and type "fastboot oem writesecureflag 3" and it will remove -revolutionary- and change s-off to s-on.
Although I have figured this out through other posts, etc.....
+1 for sticky
would of been great to be reassured there is a light at the end of tunnel if
I messed up before I jumped into rooting/flashing. And a good place to calm the nerves when you bootloop for the first time....
Sent from my clean sharp shooter
HBoot 1.50 Softbrick
My phone is bricked!
But yay for fixability, (and your optimism: I vote for stickying your post!)
It WON'T:
Go into Recovery (and it's HBoot 1.50)
Let me touch the screen, or buttons.
Bring up the start-up unlock screen.
It CAN:
Recognize when charging / when the battery is in;
Recognize the power button to turn the screen on/off.
Boot up to the main page where icons come up (But only the status bar is seen)
And Shake to take pictures! I accidentally took my first, being the screen I can get to.
Probable Causes:
I think I froze something I shouldn't have (Settings widget?), with Ti Backup.
Or that senseless Rom I put in... Now it doesn't sense me! All the thing wants to do is take pictures of its selfish self.
Solutions?
Thanks!
You're responses are much appreciated!
RUU
/10char
I vote for sticky, too.
I am no noob. I didn't do anything to my phone prior to bricking. I had my phone fully charged in the evening and woke up to a brick. The phone worked great from the time I bought it ... great the whole time it was rooted ... great with each iteration of SteelH's ROM. Then I woke up to a brick.
Even though I knew all of the steps to take (and did each one to no avail) I still felt helpless and started a thread in Q&A praying there was something to make it come back to life.
Now I'm just sad.
RemWhale said:
My phone is bricked!
But yay for fixability, (and your optimism: I vote for stickying your post!)
It WON'T:
Go into Recovery (and it's HBoot 1.50)
Let me touch the screen, or buttons.
Bring up the start-up unlock screen.
It CAN:
Recognize when charging / when the battery is in;
Recognize the power button to turn the screen on/off.
Boot up to the main page where icons come up (But only the status bar is seen)
And Shake to take pictures! I accidentally took my first, being the screen I can get to.
Probable Causes:
I think I froze something I shouldn't have (Settings widget?), with Ti Backup.
Or that senseless Rom I put in... Now it doesn't sense me! All the thing wants to do is take pictures of its selfish self.
Solutions?
Thanks!
You're responses are much appreciated!
Click to expand...
Click to collapse
Can you get into the boot loader at all? I've always heard that if it powers on it can be fixed. Also see if ADB works and look up a list of commands. A full data wipe should get you back up and running.
An RUU sounds like something I should put on my SD card; What is /10char?
Where do I find them?
@ Drewmungus:
I can get into boatloader, and fastboot, but the recovery is shot; it just restarts the phone. When I reboot the phone, should I try to adb/push something?
Many Thanks for you responses!
RemWhale,
Here is the fix (which was also above):
Download TWRP 1.0 and read the instructions on installing it on your phone. Once it is installed, recovery should work. If it doesn't,
Boot into bootloader with vol+power down. Then hit fastboot and connect your phone to your computer. Download the PG86IMG in the OP, and flash it how you would on hboot 1.5.
Problem from bad freezing or Recent ROM
yousefak said:
RemWhale,
Here is the fix (which was also above):
Download TWRP 1.0 and read the instructions on installing it on your phone. Once it is installed, recovery should work. If it doesn't,
Boot into bootloader with vol+power down. Then hit fastboot and connect your phone to your computer. Download the PG86IMG in the OP, and flash it how you would on hboot 1.5.
Click to expand...
Click to collapse
After all this, my battery shorted or something, but I did get a new one from Sprint today. I tried it out these solutions! My report:
Recovery through SD Card:
For newest versions: teamw.in/project/twrp/67
Successfully put PG86IMG.zip and recovery-twrp-shooter-1.1.1.img onto my SD card, and went to Bootloader; it said "Updated succesfully.";
when I restarted my phone, I still could ONLY see the background pic and status bar, but nothing else. It was the same.
RUU_Shooter_S_Sprint_WWE_2.08.651.2_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_208230_signed
RUU failed - Error 155 - Unknown Image Error:
One of these error messages will appear when you'd use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, It means I need to download the correct RUU version and try again. But where?
Factory Reset
Nothing. I still get MY emails, which you can see in the attached picture of the screen I get to below.
Re-Unlock Bootloader...
Take out SD Card; Cmd: "fastboot oem lock" - Cmd: "fastboot flash unlocktoken Unlock_code.bin"
(No icons on home page at all? How strange...) Hey! I'm back in!
Made a Phone call! Installed some widgets! Restored contacts!!!!
The day is saved; All is well.
Not able to tell if I have any ROMs on it at the moment...
It appears I had the wrong RUU and/or PMG86.zip; I have HBoot 1.50; is there one for my newer version? Should I start a new post for my resolved situation? BTW, thanks for trying! Please add "Re-Unlock Bootloader" as a resolution.
Please, Thank me if his helps you too! Others will find be more hopeful.
meatgel said:
I vote for sticky, too.
I am no noob. I didn't do anything to my phone prior to bricking. I had my phone fully charged in the evening and woke up to a brick. The phone worked great from the time I bought it ... great the whole time it was rooted ... great with each iteration of SteelH's ROM. Then I woke up to a brick.
Even though I knew all of the steps to take (and did each one to no avail) I still felt helpless and started a thread in Q&A praying there was something to make it come back to life.
Now I'm just sad.
Click to expand...
Click to collapse
Try Re unlocking the Bootloader -That was the only thing that could solve my problem! It erased the problem, whatever it was - Let me know if it works!
RemWhale said:
Try Re unlocking the Bootloader -That was the only thing that could solve my problem! It erased the problem, whatever it was - Let me know if it works!
Click to expand...
Click to collapse
It was a brick. I couldn't power it on and the charge light wouldn't come on. I changed batteries, changed power cords ... the guys at the Sprint store did the same stuff and then took it apart to see if it was water damage (LOL). They said they'd never seen one that wouldn't even show the charge light for a second.
I got a replacement in the mail. Hboot 1.50.
RemWhale said:
After all this, my battery shorted or something, but I did get a new one from Sprint today. I tried it out these solutions! My report:
Recovery through SD Card:
For newest versions: teamw.in/project/twrp/67
Successfully put PG86IMG.zip and recovery-twrp-shooter-1.1.1.img onto my SD card, and went to Bootloader; it said "Updated succesfully.";
when I restarted my phone, I still could ONLY see the background pic and status bar, but nothing else. It was the same.
RUU_Shooter_S_Sprint_WWE_2.08.651.2_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_208230_signed
RUU failed - Error 155 - Unknown Image Error:
One of these error messages will appear when you'd use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, It means I need to download the correct RUU version and try again. But where?
Factory Reset
Nothing. I still get MY emails, which you can see in the attached picture of the screen I get to below.
Re-Unlock Bootloader...
Take out SD Card; Cmd: "fastboot oem lock" - Cmd: "fastboot flash unlocktoken Unlock_code.bin"
(No icons on home page at all? How strange...) Hey! I'm back in!
Made a Phone call! Installed some widgets! Restored contacts!!!!
The day is saved; All is well.
Not able to tell if I have any ROMs on it at the moment...
It appears I had the wrong RUU and/or PMG86.zip; I have HBoot 1.50; is there one for my newer version? Should I start a new post for my resolved situation? BTW, thanks for trying! Please add "Re-Unlock Bootloader" as a resolution.
Please, Thank me if his helps you too! Others will find be more hopeful.
Click to expand...
Click to collapse
Well, did you try going into recovery at all? I should have included that you should have reflashed the ROM and the kernel to fix it. That probably would have gotten you fixed after the first step.
usb does not work
i flashed the miui rom and now my phone has no usb so i cant do any commands i cant use the rom i had to restore a back up of an old rom and still no usb no usb in fastboot nothing and im not sure what to do its not the cables
babybear293 said:
i flashed the miui rom and now my phone has no usb so i cant do any commands i cant use the rom i had to restore a back up of an old rom and still no usb no usb in fastboot nothing and im not sure what to do its not the cables
Click to expand...
Click to collapse
Did you try another cable? Are you sure its not the cable?
Plug in the USB while the phone is off and tell me if you can do 'adb restart'. If your phone starts, that means the USB works it should be fixable by flashing the PG86IMG.
If it doesn't work when the phone is off, there is something wrong with your USB port or the cable you are using. There could also be something wrong with your comp/usb power source.
This started when my phone was acting out on Viper 4.0 rom and I figured I'd wipe it and start fresh, wiped the phone & ROM no longer booted, went to the forum to see if there is anything new to tryout & found dirty unicorn so I thought hey that's different (for me) let's give it a shot. Long story short the phone never came back until I relocked & used a factory RUU and it worked but phone was now locked & back to stock. Phone is S-Off by the way.
Today was a new day and I was determined to either get a new rom on my phone or go back to Viper 4.0, unlocked hboot & rooted the phone, installed the newest TWRP 2.8.01 and decided ok everything looks good let's see what happens, Dirty Unicorn requires that you copy ROM to internal storage then flash and this is where the first problem occurred; I couldn't mount internal storage so I thought meh I'll just boot the factory rom & connect as USB storage so I did that, back into recovery and somehow internal storage is not in either file manager or could I get to it from the install screen. I gave up & decided to go ahead & flash from Micro-SD which didn't work, tried to wipe & fail, tried to fix permissions and fail, every time I reboot it asked to reinstall supersu so I tried to flash the most recent zip I had and sure enough fail finally one of my zips worked and I hit reboot, that was the end of my phone.....
Right now - phone is completely blank, power does nothing, power+vol down does nothing, power+vol down+vol up does nothing. When I plug the phone into PC it shows up as QHSUSB_DLOAD RUU doesn't work and fastboot commands return nothing.
ummm what do I do?
oh & the second phone was a friend's phone that he gave up on gave to me to fix for him, of course that's bricked too but I have a feeling it'll come back maybe after the battery dies, haven't tried yet. But I need to get my own phone working so I can be back in business.
Whatever recommendations are welcome
Can't wait to go to Samsung lol this or something similar happens every time I try to switch or upgrade rom.
oceanisbleu said:
This started when my phone was acting out on Viper 4.0 rom and I figured I'd wipe it and start fresh, wiped the phone & ROM no longer booted, went to the forum to see if there is anything new to tryout & found dirty unicorn so I thought hey that's different (for me) let's give it a shot. Long story short the phone never came back until I relocked & used a factory RUU and it worked but phone was now locked & back to stock. Phone is S-Off by the way.
Today was a new day and I was determined to either get a new rom on my phone or go back to Viper 4.0, unlocked hboot & rooted the phone, installed the newest TWRP 2.8.01 and decided ok everything looks good let's see what happens, Dirty Unicorn requires that you copy ROM to internal storage then flash and this is where the first problem occurred; I couldn't mount internal storage so I thought meh I'll just boot the factory rom & connect as USB storage so I did that, back into recovery and somehow internal storage is not in either file manager or could I get to it from the install screen. I gave up & decided to go ahead & flash from Micro-SD which didn't work, tried to wipe & fail, tried to fix permissions and fail, every time I reboot it asked to reinstall supersu so I tried to flash the most recent zip I had and sure enough fail finally one of my zips worked and I hit reboot, that was the end of my phone.....
Right now - phone is completely blank, power does nothing, power+vol down does nothing, power+vol down+vol up does nothing. When I plug the phone into PC it shows up as QHSUSB_DLOAD RUU doesn't work and fastboot commands return nothing.
ummm what do I do?
oh & the second phone was a friend's phone that he gave up on gave to me to fix for him, of course that's bricked too but I have a feeling it'll come back maybe after the battery dies, haven't tried yet. But I need to get my own phone working so I can be back in business.
Whatever recommendations are welcome
Can't wait to go to Samsung lol this or something similar happens every time I try to switch or upgrade rom.
Click to expand...
Click to collapse
All of the things you mentioned are user error and have nothing to do with HTC or the phone itself. Now as far as an answer goes to try to get your phone working again, have you tried holding power for 60 seconds? MOD Edit: Unnecessary.
goliath714 said:
All of the things you mentioned are user error and have nothing to do with HTC or the phone itself. Now as far as an answer goes to try to get your phone working again, have you tried holding power for 60 seconds? MOD Edit: Unnecessary.
Click to expand...
Click to collapse
Yes of course I tried, the phone has been absolutely unresponsive. No amount of button holding is going to fix QHSUSB_DLOAD
Correct me if I'm wrong but http://forum.xda-developers.com/showthread.php?t=1948485 is the only known solution for QHSUSB_DLOAD due to firmware issue (I'm pretty sure this is what happened) or Jtag.
Here's the kicker, the files in that thread are no longer there so as it stands phone's just a Brick.
So for now I'm giving up on it and going samsung.
When I have the energy I may try working on the second one I have which turns out wasn't bricked instead the power button is unusable 90% of the time, but for now that's going to be left out of commission. Ultimately I need a backup because sprint techs seem to only operate on a 3 day basis when it comes to physical repairs therefore I plan to revive the second phone just to keep it as plan-b.
May all be user error but frankly what takes me minutes with a samsung seems to take days on the past couple of HTC phones I've had, so the ranting aspect of my post is merely in these regards and that only and out of frustration, this sucks because I'd take HTC build quality over samsung any day. I've been an HTC faithful since their first windows phone (5 years ago or so).
I know I have to fix the power button on the second phone but have any idea why it fails halfway through a factory RUU?
that's where I left off with it, it's S-On Unlocked running TWRP 2.8.0.1 I was trying to return it to full stock so I can have a go with facepalm S-Off procedure.
Did you relock the bootloader prior to attempting to run the RUU?
Magnum_Enforcer said:
Did you relock the bootloader prior to attempting to run the RUU?
Click to expand...
Click to collapse
out of 3 different RUUs I donwloaded only one worked, bootloader was relocked, ran RUU, Error 132 "Signature Error"
the one that did work the installer said finished, phone reboots but goes right back to bootloader where it says "Relocked" & "Security Warning" won't do anything else.
when i open into recovery and go into twmp and i go to reboot>recovery it says no os installed. my recovery is completely gone. what do?
Ok so I was searching, a lot, and found that I can turn the phone back to OEM. unfortunately every guide I have read says it needs to be s-off using firewater. When i do the "adb reboot" function it gets stuck at the htc boot screen and I cannot perform the second step in making the phone s-off. what do I do? Is my phone legitimately bricked? Like hard bricked forever?
I also ran the RUU. It goes through and when it gets to step 1 of 7 it stops and says "unknown error occurred" I go through the error recovery steps and it still does not work. Just trying to keep all the info here so you understand the situation I'm in. It also boots into recovery mode, obviously, with the power button and volume down button.
got it. could go ahead and delete post.
Don't have the thread deleted, but instead explain how you finally solved the problem so others may learn from your experiences...
-Sent from a payphone...
tttomdemaria said:
Ok so I was searching, a lot, and found that I can turn the phone back to OEM. unfortunately every guide I have read says it needs to be s-off using firewater. When i do the "adb reboot" function it gets stuck at the htc boot screen and I cannot perform the second step in making the phone s-off. what do I do? Is my phone legitimately bricked? Like hard bricked forever?
Click to expand...
Click to collapse
I know you've already sorted it out. But first, this phone is not bricked if the screen comes on. Recovering is usually not hard at all, just a matter of knowing how to do it.
Second, were you referring to a warranty claim for a phone being not bootable due to mods that you did? That isn't covered under warranty, and is immoral. Take responsibility for your actions; and don't jump the gun and think you have to get a new phone after just a couple hours of unsuccessful attempts to get the phone running. If you want to root and mod these devices, you are going to have to learn to be patient and work through little quirks like this.
Lastly, the phone needs to be bootable to perform firewater s-off.
Thanks. yea my only two friends that do this kind of **** are like seriously the most pessimistic, negative assholes I have seriously ever met in my life. They kinda just scared me into thinking it was easy to brick a phone and totally mess it up. After some research i just found all I had to do was run an RUU and make sure the phone was relocked.
seriously. they are real negative nancies.
Ok for those of you who may ever be in the situation I was in I will write up how i fixed it. very simple and took probably about 20 minutes start of download of tools to finish. This was done on windows 7 but i'm sure it is pretty similar on windows 8 as well.
In order to do this you will need to know that holding the power button AND the volume up button simultaneously emulate a battery pull and that holding the power button AND the volume down button enter recovery mode. If you are stuck in a boot screen or splash screen like I was you will need to emulate a battery pull and them immediately switch to enter recovery without actually removing your finger from the power button.
Then you need to make sure you have the right tools. you can find them at these locations.
RUU- http://forum.xda-developers.com/showthread.php?t=2757462
ADB- http://www.mediafire.com/download/5s2nfws9wkj9gyq/adb-fastboot.zip
Now you need to make sure your phone is either "***LOCKED*** or ***RELOCKED*** when you enter the recovery mode.
You can do this very easily. Plug your phone into your computer and enter recovery mode. Make sure the phone is in Fastboot USB mode and not Hboot. Open the folder titled "Android" in the adb kit you downloaded from the link above. Shift + right click anywhere on that folder(not on a file) and choose "Open command window here" type in the command window "fastboot oem lock". It will show as "relocked" after you do this and it reboots. This will allow you to run the RUU without any issues. Always make sure the phone is in "Fastboot USB" mode.
Now run the RUU executable and it will automatically pick up your phone assuming all of your drivers are in order. Just hit yes to everything and it will run through what it needs to. If you do not have a progress bar on your phone's screen as well as your computer then you messed up somewhere. start over.
If you try to do this on the At&T htc one (m8) without actually relocking it first the RUU will fail at step 1 of 7.
Good luck.
tttomdemaria said:
Thanks. yea my only two friends that do this kind of **** are like seriously the most pessimistic, negative assholes I have seriously ever met in my life. They kinda just scared me into thinking it was easy to brick a phone and totally mess it up. After some research i just found all I had to do was run an RUU and make sure the phone was relocked.
seriously. they are real negative nancies.
Click to expand...
Click to collapse
Then stay away from those guys! Sounds like they don't really know that much, wrong attitude, and you are probably already on your way to knowing what they know, if not more.
This phone is pretty hard to brick. As long as you aren't flashing hboot or radio, and don't flash anything intended for another device, its pretty difficult to brick this phone by modding it. The condition you were in was not a brick, and not even close. Some call this a "soft brick" but in my opinion, there is no such thing, its either bricked (requires opening the phone to recovery, such as JTAG or replacing motherboard) or its not. What I call it is "something is wrong with the phone and you just need to do the right steps to get running again".
---------- Post added at 11:22 AM ---------- Previous post was at 11:16 AM ----------
tttomdemaria said:
Ok for those of you who may ever be in the situation I was in I will write up how i fixed it. very simple and took probably about 20 minutes start of download of tools to finish.
Click to expand...
Click to collapse
Glad you sorted it out, so nice job.
Although RUU was probably a little overkill. RUU is a useful recovery tool, although a bit of a nuclear option. But good last resort. Since you RUU'ed, you will need to unlock the bootloader again, and flash custom recovery to get back to where you were originally (phone setup for mods) if that is the intention. If the intent was to go back to stock and stay there, RUU is a great way to do that.
You probably could have just gotten back up and running by using adb to wipe cache, re-install custom recovery and flash a ROM.