So I have an Xperia Mini, the phone is rooted, bootloader is unlocked and CWM recovery is installed.
I booted into recovery and followed the steps outlined to flash this rom:
http://forum.xda-developers.com/showthread.php?t=1705255
I can't think what I've done wrong but the phone is now frozen on the 'Sony Ericisson' screen.
I know how to get it back to stock but anyone any ideas what I'm doing wrong in the flash process? I've tried twice now, with same result.
Thanks in advance.
Did you install the correct kernel for your phone?
Gesendet von meinem WT19i mit Tapatalk 2
Did you flash the recommended kernel?
motorazrv3 said:
Did you install the correct kernel for your phone?
Gesendet von meinem WT19i mit Tapatalk 2
Click to expand...
Click to collapse
Ok so I didn't. That's necessary? It won't work on stock kernel?
Will it work if I flash the kernel after the firmware?
cuddagh said:
Ok so I didn't. That's necessary? It won't work on stock kernel?
Will it work if I flash the kernel after the firmware?
Click to expand...
Click to collapse
Yes you have to flash the correct kernel. It's necessary.
If you already flashed the Rom via cwm, than only flash the kernel for your phone and it should boot. If not, then install the rom again.
Good luck.
Gesendet von meinem WT19i mit Tapatalk 2
Dude, did you read carefully where it says not to install on a mini or active with locked bootloaders yet because it needs to be tested? And your phone is an St15i not Sk15i
Edit: I see it's unlocked lol, my bad, but you need to install the correct kernel for that to work
Related
Hi Boys
I going to install Ace-i-Sure, but in post, BRIJESH said: Installed kernels from CWM. But in Hell_Lock post, the author said: Installed Kernel with ODIN. What have i do?
P.D: Im Spanish, sorry if i write wrong or i commit some mistakes. For my learning can you show my mistakes?
Regards
Yes, you have to flash hell_fusion from ODIN, after flashing the ROM.
Android-fany said:
Yes, you have to flash hell_fusion from ODIN, after flashing the ROM.
Click to expand...
Click to collapse
After? What's happens if I flash hell_fusion before?
P.D: If I Flash a ROM and lose some coverage, What have i do?
AW: [Q] Ace-i-Sure ROM
Yunito53 said:
After? What's happens if I flash hell_fusion before?
Click to expand...
Click to collapse
If you flash it before the kernel gets overriten (I think)
Gesendet von meinem GT-S5830i mit Tapatalk 2
Android-fany said:
Yes, you have to flash hell_fusion from ODIN, after flashing the ROM.
Click to expand...
Click to collapse
You can install it from mobile too
Check rio. thread in Galaxy Y section
AW: [Q] Ace-i-Sure ROM
iamareebjamal said:
You can install it from mobile too
Check rio. thread in Galaxy Y section
Click to expand...
Click to collapse
Yep, but flashing it through ODIN is still the best. I would recommend it if you can go to your PC.
Gesendet von meinem GT-S5830i mit Tapatalk 2
Ah, thanks for all!
Question resolved!
hey, is this rom good...............i am thinking of flashing this rom.....................
can you plz post some screenshots.....if you had installed this rom.....
RE :
Some Screenshot are in show screen section in Ace-i-sure V.9.0.0 post
Hi,
Tried to flash, bootloop, and thats all it does, no more power+volume up, nothing just booting.
PLS HELP ME QUICKLY its mid ****ing night
What die you flash? Did you flash Boot.IMG?
Gesendet von meinem One X+ mit Tapatalk 2
Notechis said:
What die you flash? Did you flash Boot.IMG?
Gesendet von meinem One X+ mit Tapatalk 2
Click to expand...
Click to collapse
I used venom kernel flasher to flash a Boot.img, after that it rebooted and i got this.
What Rom?
Gesendet von meinem One X+ mit Tapatalk 2
Notechis said:
What Rom?
Gesendet von meinem One X+ mit Tapatalk 2
Click to expand...
Click to collapse
I wanted to install that MIUI thing, i did every step right...
Did you flash Boot.IMG from inside oft ZIP?
Gesendet von meinem One X+ mit Tapatalk 2
Notechis said:
Did you flash Boot.IMG from inside oft ZIP?
Gesendet von meinem One X+ mit Tapatalk 2
Click to expand...
Click to collapse
Yes.
I would try a fresh install, maybe you forgot something. Make a wipe and try a clean install again. Maybe bad download
Gesendet von meinem One X+ mit Tapatalk 2
Notechis said:
I would try a fresh install, maybe you forgot something. Make a wipe and try a clean install again. Maybe bad download
Gesendet von meinem One X+ mit Tapatalk 2
Click to expand...
Click to collapse
Yes great idea . But i cant do anything. No connection my pc because it says installing dr- unplugged.
You have to go into hboot. It could be tricky ton time this. I am sure you flashed
wrong kernel.
Gesendet von meinem One X+ mit Tapatalk 2
snowyfoxy said:
Yes great idea . But i cant do anything. No connection my pc because it says installing dr- unplugged.
Click to expand...
Click to collapse
Seems like i fixed it i ran OXP_FLASH_KERNEL and it worked...
But i still wonder why it didnt work, it said put the boot.img in and i did.
You have to set the right path using venom flasher. The default kernel is sense and that would cause boot loop.
Gesendet von meinem One X+ mit Tapatalk 2
Notechis said:
You have to set the right path using venom flasher. The default kernel is sense and that would cause boot loop.
Gesendet von meinem One X+ mit Tapatalk 2
Click to expand...
Click to collapse
I got ViperX+ 1.0.9 using Elite kernel, but i was thinking, maybe i need the stock kernel to use MIUI V5 ??
(Yeah im a noob,im very sorry :S)
snowyfoxy said:
I got ViperX+ 1.0.9 using Elite kernel, but i was thinking, maybe i need the stock kernel to use MIUI V5 ??
(Yeah im a noob,im very sorry :S)
Click to expand...
Click to collapse
For MIUI you need the kernel that has been asked by the OP. definitely not the stock kernel!
It is a modified CM10 kernel, if you are talking about the WIP ROM by Notorious in the general forum that is..
Addicted2xda said:
For MIUI you need the kernel that has been asked by the OP. definitely not the stock kernel!
It is a modified CM10 kernel, if you are talking about the WIP ROM by Notorious in the general forum that is..
Click to expand...
Click to collapse
Alright thanks for the help
Hi everyone, I want to install the newest German version of Miui on my stock device.
I have download the newest version and Odin on my computer. I know I must flash a kernel that have cwm. But I don't know which kernel I have to take. On the Miui site the guide says, tags I have to download I9300_tools.zip. There must be the file: GT-I9300_TGY_I9300XXLEF.tar that I have to flash with Odin. Can anyone please tell me where I can get this file.
I am on Android 4.2.2
Gesendet von meinem GT-I9300 mit Tapatalk
marcusdevan said:
Hi everyone, I want to install the newest German version of Miui on my stock device.
I have download the newest version and Odin on my computer. I know I must flash a kernel that have cwm. But I don't know which kernel I have to take. On the Miui site the guide says, tags I have to download I9300_tools.zip. There must be the file: GT-I9300_TGY_I9300XXLEF.tar that I have to flash with Odin. Can anyone please tell me where I can get this file.
I am on Android 4.2.2
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
you don't need a kernel to flash CWM! it is separate tar file that you need to flash via odin! and more over, to flash a custom rom, you need to have the latest recovery(CWM touch or Philz touch). download the zip file and flash it through CWM recovery. you really need to go through the basics! don't brick your phone! goodluck
I have only experience by flashing galaxy s1. So I need to know, what I have to do step by step to get Miui on my phone.
Gesendet von meinem GT-I9300 mit Tapatalk
Can I flash with Odin cf autoroot and after that flash threw cwm the Miui file and full wipe?
Gesendet von meinem GT-I9300 mit Tapatalk
marcusdevan said:
Can I flash with Odin cf autoroot and after that flash threw cwm the Miui file and full wipe?
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
yes. full wipe before installation is a good thing to do.
Worked, thx for the help
Gesendet von meinem GT-I9300 mit Tapatalk
I know with the 4.3 update and the new bootloader (I think) I can't flash custom roms but can I install a recovery and flash mods without bricking my phone and if so, how?
What for a cell u have? Firmware etc
Gesendet von meinem Xperia SP
joke19 said:
What for a cell u have? Firmware etc
Gesendet von meinem Xperia SP
Click to expand...
Click to collapse
Samsung Galaxy S III and stock I believe unless that means the build number and then ML1
Guys at this moment i have arter kernel. But my phone lags after using it 2-3 days .
So i want to have stock kernel. How i can do this without an factory reset?
Maybe anyone has an stock kernel zip to flash in recovery?
Thanks
Gesendet von meinem SM-G925F mit Tapatalk
guyshelpmeplease said:
Guys at this moment i have arter kernel. But my phone lags after using it 2-3 days .
So i want to have stock kernel. How i can do this without an factory reset?
Maybe anyone has an stock kernel zip to flash in recovery?
Thanks
Gesendet von meinem SM-G925F mit Tapatalk
Click to expand...
Click to collapse
Backup your files and do factory reset it will give ur device a boost