Hi all
I'm not new to flashing but I'm new to flashing cm7.
I odin back to stock jfd eclair. Root and Install CWM 2.xxx. I downloaded the stable cm7 and I started flashing. (after I wipe data/cache of course)
IN recovery, it said finding package, opening package, then my phone processed a series of lines and reboot automatically. On the startup, it says VIBRANT SAMSUNG, then GALAXY S CYANOGEN(mod) then the same recovery screen with many lines. It moved too fast into another reboot I couldn't read what was on the screen. And it kept doing this for quite 10 mins now.
Is it normal? if not, what did I do wrong? I can get into download mode and odin back to stock but I did it last night and I couldn't think what i did wrong.
Please help!
Hmmmm..... seems a bit wierd, try going into recovery and wiping and reinstalling with a new download.
Sent from my Nexus S 4G using XDA App
stumpyz9 said:
Hmmmm..... seems a bit wierd, try going into recovery and wiping and reinstalling with a new download.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
No i don't think its a bad dl. I checked md5. I'm odin back to stock again now.
wavestar92 said:
No i don't think its a bad dl. I checked md5. I'm odin back to stock again now.
Click to expand...
Click to collapse
Try reflashing cwm when your rooted, may have not flashed right
Sent from my Gewgle Phone via XDA App
This happened to me also, I went directly back to recovery, 3 button, and reflashed. Worked the second flash for some reason.
Thanks. I turn it off, get into recovery again, and re flash it successfully
Same exact thing happened. I have no idea how many time I odened back to stock trying to figure it out.
I did as you guys said, as soon as that loop began, pulled the battery and got back into recovery. flashed again and worked just fine!
same thing happened to me...i got back into recovery...i noticed cwm updated to 5.0.2.8 then i reflashed and all good...when i tried to flash at first. cwm was 2.5 ..maybe thats the issued it wont flash on that...has to be cwm 5.0
anyway getting ready enjoy some cm7 on my vibrant...
I finally bricked my first phone.Its been a long ride but it caught up to me. I have had three different android phones within about 4 years and have successfully rooted all three myself and have successfully flashed them over and over close to 1000 times between all three phones including modems, kernals, gapps, themes etc. So what gives? Why today? To be honest I don't know. But here is what happened...
The past few days I have been going back and forth between different kernals for this device to try to get something that won't freeze up. ( I liked browsing on this phone but I would get freeze ups and therefore would flash something new to try and resolve it.) Today my phone froze so I tried a simple reboot. The boot then did a freeze on the kernal's "intro" picture. It wasn't a bootloop it just frooze. (I was on XWLPT with Skyfire Kernal). I decided to reboot into recovery and flash a different kernel. I flashed NEAK The flash went halfway then stuck and froze. I rebooted to try to get back to the phone's main screen. This time it would not boot. I couldn't tell if it was in bootloop or was froze. I went back into recovery. Here I should of wiped everything but in the back of my mind I thought I could just do it in odin if I lost recovery. So I tried flashing Siyah for sammy roms. This is when I lost everything. It froze in cmw on the flash again but this time when I tried going back into recovery it stayed on the Galaxy SII screen. So I put the phone in download mode and started Odin up. When trying to flash anything in Odin I got stuck on nand write start! I never heard of this. I thought Odin would work as this is how I rooted the phone when I first got it. Last thing I did was install kies which couldn't even connect to the phone. So all I am left with is download mode and taking way more caution when flashing. I think it may have been a case of the brickbug. Even though I was on a I9100 rom and using "safe" kernels I believe something happened to lock me out from writing anything to the phone.
U already posted this in another thread. I posted a response there for ya
Sent from my SGH-I777 using Tapatalk 2
Sad.
I got my galaxy s2 bricked twice
Double posting is no bueno.:thumbdown:
Sent from my SGH-i777 using XDA
anup123456 said:
I got my galaxy s2 bricked twice
Click to expand...
Click to collapse
Not really related.. (Yes I know my post isn't related either)
I bricked my sgs2 not to long ago At&t could not fix so in one last attempt I tried to flash back to Pics stock it took some time but finally recoverd using odin
Sent from my SGH-I777 using xda premium
VICIOUSVIC1 said:
I bricked my sgs2 not to long ago At&t could not fix so in one last attempt I tried to flash back to Pics stock it took some time but finally recoverd using odin
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
what's pics stock?
Sent from my SGH-I777 using xda premium
Phalanx7621 said:
what's pics stock?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Pics stock is when you're typing and not paying attention then the auto complete changes pics stocks to pics stock. Got it?
Revert to stock using Odin and download mode probably or the guys and (sorry if I hurt anyone's feelings) but the guys at mobile tech videos offer a service to unbrick your phone.
Sent from my GT-I9100 using xda app-developers app
bocephus007 said:
Revert to stock using Odin and download mode probably or the guys and (sorry if I hurt anyone's feelings) but the guys at mobile tech videos offer a service to unbrick your phone.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Yeah I know . But its just a front man! They receive the bricked device, then send it to some Chinaman named Finchenzo. And he fixes em all and sends em back to mobile tech! Then you get your device back! Poor Finchenzo
Sent from my SGH-I777 using Tapatalk 2
paulfrankie said:
I finally bricked my first phone.Its been a long ride but it caught up to me. I have had three different android phones within about 4 years and have successfully rooted all three myself and have successfully flashed them over and over close to 1000 times between all three phones including modems, kernals, gapps, themes etc. So what gives? Why today? To be honest I don't know. But here is what happened...
The past few days I have been going back and forth between different kernals for this device to try to get something that won't freeze up. ( I liked browsing on this phone but I would get freeze ups and therefore would flash something new to try and resolve it.) Today my phone froze so I tried a simple reboot. The boot then did a freeze on the kernal's "intro" picture. It wasn't a bootloop it just frooze. (I was on XWLPT with Skyfire Kernal). I decided to reboot into recovery and flash a different kernel. I flashed NEAK The flash went halfway then stuck and froze. I rebooted to try to get back to the phone's main screen. This time it would not boot. I couldn't tell if it was in bootloop or was froze. I went back into recovery. Here I should of wiped everything but in the back of my mind I thought I could just do it in odin if I lost recovery. So I tried flashing Siyah for sammy roms. This is when I lost everything. It froze in cmw on the flash again but this time when I tried going back into recovery it stayed on the Galaxy SII screen. So I put the phone in download mode and started Odin up. When trying to flash anything in Odin I got stuck on nand write start! I never heard of this. I thought Odin would work as this is how I rooted the phone when I first got it. Last thing I did was install kies which couldn't even connect to the phone. So all I am left with is download mode and taking way more caution when flashing. I think it may have been a case of the brickbug. Even though I was on a I9100 rom and using "safe" kernels I believe something happened to lock me out from writing anything to the phone.
Click to expand...
Click to collapse
Send it to MobileTechVideo.com. I sent my bricked SG2 in and a week later and at a cost of only $50, it was returned fully functional.
Sent it to MTV. Mobile Tech Video said this...The device's onboard EMMC controller was in a non-responsive state.
I never flashed anything that wasn't specifically made to be flashed for an i777.
Everything I had ever flashed was on the i777 development thread.
My advice ...beware of the brickbug. Also don't flash anything when the phone is hot. This happened when my phone was hot and maybe a reason why it froze while flashing in cwm.
And for a recap... What did you flash right before tie happened and what were you coming from?
Clay
Team Pirate
Sent from my PINK SGH-I777
Specifically the rom booted fine with Shostock-XWLPT. When using the rom sometimes it would freeze up so I flashed NEAK kernal over it. Froze in cmw during halfway through the flash.Rebooted after about 5 minutes wating for cmw to finish. (it never did) Phone bootlooped. Pressed hardbuttons to get to recovery. Recovery worked went into NEAK cwm. Instead of wiping and starting fresh here decided I would take a shortcut and flashed a Siyah for i777 over that. CWM froze again halfway through flashing the Siyah. After waiting 5 minutes again decided to reboot. Phone bootlooped. No more hardbutton recovery. Phone bricked. I Can still go into download mode but even MTV could not unbrick it. Said EMMC controller was in unresponsive state. Don't know what that means but know its now a paperweight.
Got it back today I still can get into download mode. Odin will recognize phone. When I try to flash a kernal it follows through until right before it actually writes and says NAND Write Start. I believe the internal memory either is filled with bad sectors or someting like brickbug locked anything from writing to EMMC.
I've been trying to load a new rom onto my fascinate sch-i500v for a few hours now. I previously had a 4.1 build (milestone I think) and cwm 4.0.1.0 installed. I've tried every rom from cw10 to hellybean to avatar and they all do the same thing. I wipe the cache, factory reset. Then installed from the zip file. At this point, the install starts to initiate, but the phone suddenly reboots and after a few seconds tries to load up the old rom (unsuccesfully, hence why I said I'm seeing the "initiating swagger" load screen forever)
Yesterday, I did this exact upgrade successfully to my other fascinate sch-500 (no v on the end for that one, not sure if that makes any difference).
That one rebooted suddenly as well, but it went back into the clockwork recovery and completed the install without a hitch.
Anybody have any suggestions? I'm sort of a noob, but I have flashed over ten phones...
Go back to stock and start over
Sent from my SCH-I500 using Tapatalk 2
bbrad said:
Go back to stock and start over
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Thank you. i fugured that was what I needed to do, but I was afraid of how complicated it would be. LMFAO, it was pretty simple!
I've had this 4-5 times now, with various ROMs, tried CM10.1, 10.2 most recently. Basically the phone randomly stops booting, I can get to the recovery fine, but booting to system gets stuck on the Galaxy S4 Logo screen. Tried dalvik / cache wipes, permission fix, nothing helps.
Firstly, unless I completely wipe data (full wipe including /data/media), I can't seem to be able to install a new ROM. If I dirty flash everything works fine, but if I do a factory reset, I will get stuck on the logo at boot. Then even after I have successfully installed a ROM, I will sometimes randomly get stuck on reboots, and nothing but another full wipe will fix this. Is this an issue with the TWRP recovery? or is my internal memory fudged and getting corrupt ?
edit: See my post here for details on what I've found so far, I may have fixed the problem but needs more testing http://forum.xda-developers.com/showthread.php?t=2397438&page=2
TWRP!!!!
SellswordShev said:
I've had this 4-5 times now, with various ROMs, tried CM10.1, 10.2 most recently. Basically the phone randomly stops booting, I can get to the recovery fine, but booting to system gets stuck on the Galaxy S4 Logo screen. Tried dalvik / cache wipes, permission fix, nothing helps.
Firstly, unless I completely wipe data (full wipe including /data/media), I can't seem to be able to install a new ROM. If I dirty flash everything works fine, but if I do a factory reset, I will get stuck on the logo at boot. Then even after I have successfully installed a ROM, I will sometimes randomly get stuck on reboots, and nothing but another full wipe will fix this. Is this an issue with the TWRP recovery? or is my internal memory fudged and getting corrupt ?
Click to expand...
Click to collapse
I'm having the same [email protected]#$%^& problem!!!! you're using TWRP aren't you?
i finished reading your post after I was done and saw that you ARE using TWRP...
thepianoman77 said:
I'm having the same [email protected]#$%^& problem!!!! you're using TWRP aren't you?
i finished reading your post after I was done and saw that you ARE using TWRP...
Click to expand...
Click to collapse
yep I was on TWRP 2.5.0.2, I just read that its got some stability problems with /data, just flashed v2.6 hopefully this fixes it
SellswordShev said:
yep I was on TWRP 2.5.0.2, I just read that its got some stability problems with /data, just flashed v2.6 hopefully this fixes it
Click to expand...
Click to collapse
oh dude.... I was on v2.6... I think we have an issue.
That is why I use cwm. Been using it for 3+ years on 4 different devices. Never have I had one problem with it.
Sent from my SCH-I545 using Tapatalk 2
hexitnow said:
That is why I use cwm. Been using it for 3+ years on 4 different devices. Never have I had one problem with it.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
i had a very bad experience with CWM... never using it again man.... no way.
thepianoman77 said:
i had a very bad experience with CWM... never using it again man.... no way.
Click to expand...
Click to collapse
Lol ok :thumbup:
Sent from my SCH-I545 using Tapatalk 2
I've been using TWRP too. I panicked last night when I couldn't boot at all. I couldn't even get to recovery. I then tried the no wipe odin without luck. I finally got the stock odin image to work but I've been having serious issues with booting on this phone since I got it this weekend and it could be TWRP I suppose. I was using it on my note 2 with no issues. Very strange. I'm back to stock and running fine now.
Sent from my SCH-I545 using xda premium
Still having odd issues with TWRP after updating to 2.6, getting stuck on boot as before, and sometimes flashing a ROM will just fail and the data partition becomes read only, and I can't push anything to it till I reformat /data.
Going to try CWM today, really hope this is just a recovery issue. Are there any tests to check the health of on board memory? I am really hoping I don't have bad hardware here.
Im having the same issue just made a thread fir it guess I will delete since I found this. Hope someone figures it out. What root/ recovery method did you all use. Was it the auto script?
Sent from my SCH-I545 using xda premium
ruffneckZeVo said:
Im having the same issue just made a thread fir it guess I will delete since I found this. Hope someone figures it out. What root/ recovery method did you all use. Was it the auto script?
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Root / recovery methods will be the same for everyone, regardless of what guide / thread you followed, in the end you will have a loki-patched recovery and kernel, as thats the only way to run unsigned images on these phones. Whats relevant here is which recovery and kernel you are using, as these are the only 2 things that could effect errors in the boot logo state (aka freezes before the ROM boot animations kick in). Ive been looking through various ROM threads of people reporting this issue and its pretty widespread, and usually is linked to recoveries rather than ROMs. If you can post your recovery + ROM here that would be helpful. Here is what I've done so far:
I was initially on TWRP 2.5.0.2, which had possible bugs that could corrupt /data, leading to failed flashes, and being unable to read/write from /data entirely (including /sdcard). After switching to 2.6.0.0 I was still getting stuck on the boot animation. (All of this running the CM10.2 ROM with the stock kernel here http://forum.xda-developers.com/showthread.php?t=2384470). Note I did not do a full wipe after switching to 2.6.0.0, so that recovery MAY still be ok if someone wants to test it out.
I am now running CWM (official installed off ROM Manager). After flashing this I did a full re-format (/system, /data (including /data/media), etc.). And so far I haven't had any problems, going to do some more fiddling / flashing tonight to try and see if its really fixed, but I know for sure that atleast the reboot bug is gone.
So my advice is to flash the official CWM recovery, do a full re-format using that recovery, and then re-install your ROM.
I had that same /data issue with TWRP. It worked perfect for a few months and then suddenly it happened. I enjoyed TWRP for the 10 minute backups and restores, but i'd rather put up with CWM's 30 minute backup and restores if that will mean it wont happen again. Currently running PhilZ Touch Recovery and its been perfect so far!
Monkz said:
I had that same /data issue with TWRP. It worked perfect for a few months and then suddenly it happened. I enjoyed TWRP for the 10 minute backups and restores, but i'd rather put up with CWM's 30 minute backup and restores if that will mean it wont happen again. Currently running PhilZ Touch Recovery and its been perfect so far!
Click to expand...
Click to collapse
Have you tried any 4.3 ROMs with the PhilZ recovery? There seem to be some issues there. Still that recovery may be a good solution for those on 4.2 having this problem. I'm gonna try and loki patch the official CWM touch tonight if I don't run into this bug again, using the volume buttons is so bloody painful lol.
SellswordShev said:
Have you tried any 4.3 ROMs with the PhilZ recovery? There seem to be some issues there. Still that recovery may be a good solution for those on 4.2 having this problem. I'm gonna try and loki patch the official CWM touch tonight if I don't run into this bug again, using the volume buttons is so bloody painful lol.
Click to expand...
Click to collapse
None of my ROMs are 4.3, but i know the one i'm using is soon to be updated, so i will know if it works or not when it gets updated to 4.3. But no issues on 4.2.2 ROMS as of yet with PhilZ.
Monkz said:
None of my ROMs are 4.3, but i know the one i'm using is soon to be updated, so i will know if it works or not when it gets updated to 4.3. But no issues on 4.2.2 ROMS as of yet with PhilZ.
Click to expand...
Click to collapse
is PhilZ a recovery?
thepianoman77 said:
is PhilZ a recovery?
Click to expand...
Click to collapse
Yes its a custom build of CWM maintained by an xda dev here http://forum.xda-developers.com/showthread.php?t=2322675
Im still having the issue with philz. Everything was fine for the first 4-5 weeks. Now about every 3rd reboot or if battery dies I have to wipe data and nandroid. Im running stock with several tweaks. Going to try and odin restore to stock re root snd install cwm tonight and see if that helps will report back
Sent from my SCH-I545 using xda premium
Alright, I'm almost 99% sure this problem is gone after I switched to the official CWM. I've tried everything from restoring nandroids to flashing TWiz / AOSP 4.2 and 4.3 ROMs, everything boots and reboots and /data is no longer getting corrupt. I also loki patched the official CWM touch recovery (the one on their site is not patched), and flashed + used it successfully. Its pretty simple to do this, just follow the guide here: https://github.com/djrbliss/loki and use this recovery: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.3.2-jfltevzw.img
The only issue I've been having is that when I reboot to recovery, it sometimes gets stuck and I have to do a battery pull and go back into recovery.
Sent from my SCH-I545 using Tapatalk 4
I'm having the same issue on TWRP 2.6. Tried with multiple ROMs. Everytime I reboot I have to format /Data. So frustrating. I will try CWM now.