[TWEAKS][SCRIPTS] Collection build.prop; init.d; etc. Now with Tewaks-Combo - Sony Xperia P, U, Sola, Go

I've been collecting some tweaks and scripts and seems to me it's now time to share it. While some values in terms of optimization might be different from device to device, I've found these pretty consistent throughout many.
I didn't tested all of them, and i don't assume any risk!!! Use them at you own risk!!!
Some useful tips on how to use them at the end of the post
This thread will be updated when new/better things come out
Superuser, Busybox install/update
1. Easily install Busybox (YOU NEED ROOT FIRST)
Code:
https://play.google.com/store/apps/details?id=com.jrummy.busybox.installer&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5qcnVtbXkuYnVzeWJveC5pbnN0YWxsZXIiXQ..
2. UPDATE SuperUser (root app)
Code:
http://goo.im/superuser/
Build.prop
(edit your /system/build.prop with a file manager with root access)
Careful for already existing settings. In this case, just change the values.
1. Force launcher into memory
Code:
ro.HOME_APP_ADJ=1
2. Raise JPG quality to 100%
Code:
ro.media.enc.jpeg.quality=100
3. VM Heapsize; higher the RAM, higher the hp can be
Code:
dalvik.vm.heapsize=96m
4. Render UI with GPU
Code:
debug.sf.hw=1
5. Decrease dialing out delay
Code:
ro.telephony.call_ring.delay=0
6. Helps scrolling responsiveness
Code:
windowsmgr.max_events_per_sec=150
7. Save battery
Code:
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
8. Disable debugging notify icon on statusbar
Code:
persist.adb.notify=0
9. Increase overall touch responsiveness
Code:
debug.performance.tuning=1
video.accelerate.hw=1
10. Raise photo and video recording quality
Code:
ro.media.dec.jpeg.memcap=12000000
ro.media.enc.hprof.vid.bps=12000000
11. Signal (3G) tweaks
Code:
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
12. Net speed tweaks
Code:
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
13. Disable blackscreen issue after a call
Code:
ro.lge.proximity.delay=25
mot.proximity.delay=25
14. Fix some application issues
Code:
ro.kernel.android.checkjni=0
15. Phone will not wake up from hitting the volume rocker
Code:
ro.config.hwfeature_wakeupkey=0
16. Force button lights on when screen is on
Code:
ro.mot.buttonlight.timeout=0
17. Disable boot animation for faster boot
Code:
debug.sf.nobootanimation=1
18. Miscellaneous flags
Code:
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
19. Specifics to some LG devices
Code:
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
user.feature.flex=true
user.feature.lgdrm=false
user.feature.lgresource=false
user.feature.lgpoweroff=false
user.feature.ls_event=false
user.feature.ls_normal=false
user.feature.sui=false
Init.d
(needs ROM with init.d access and busybox, open empty file, insert header #!/system/bin/sh and put these there, save in /system/etc/init.d and name it something like 77tweaks)
1. strict minfree handler tweak
Code:
echo "2048,3072,6144,15360,17920,20480" > /sys/module/lowmemorykiller/parameters/minfree
2. internet speed tweaks
Code:
echo "0" > /proc/sys/net/ipv4/tcp_timestamps;
echo "1" > /proc/sys/net/ipv4/tcp_tw_reuse;
echo "1" > /proc/sys/net/ipv4/tcp_sack;
echo "1" > /proc/sys/net/ipv4/tcp_tw_recycle;
echo "1" > /proc/sys/net/ipv4/tcp_window_scaling;
echo "5" > /proc/sys/net/ipv4/tcp_keepalive_probes;
echo "30" > /proc/sys/net/ipv4/tcp_keepalive_intvl;
echo "30" > /proc/sys/net/ipv4/tcp_fin_timeout;
echo "404480" > /proc/sys/net/core/wmem_max;
echo "404480" > /proc/sys/net/core/rmem_max;
echo "256960" > /proc/sys/net/core/rmem_default;
echo "256960" > /proc/sys/net/core/wmem_default;
echo "4096,16384,404480" > /proc/sys/net/ipv4/tcp_wmem;
echo "4096,87380,404480" > /proc/sys/net/ipv4/tcp_rmem;
3. vm management tweaks
Code:
echo "4096" > /proc/sys/vm/min_free_kbytes
echo "0" > /proc/sys/vm/oom_kill_allocating_task;
echo "0" > /proc/sys/vm/panic_on_oom;
echo "0" > /proc/sys/vm/laptop_mode;
echo "0" > /proc/sys/vm/swappiness
echo "50" > /proc/sys/vm/vfs_cache_pressure
echo "90" > /proc/sys/vm/dirty_ratio
echo "70" > /proc/sys/vm/dirty_background_ratio
4. misc kernel tweaks
Code:
echo "8" > /proc/sys/vm/page-cluster;
echo "64000" > /proc/sys/kernel/msgmni;
echo "64000" > /proc/sys/kernel/msgmax;
echo "10" > /proc/sys/fs/lease-break-time;
echo "500,512000,64,2048" > /proc/sys/kernel/sem;
5. battery tweaks
Code:
echo "500" > /proc/sys/vm/dirty_expire_centisecs
echo "1000" > /proc/sys/vm/dirty_writeback_centisecs
6. EXT4 tweaks (greatly increase I/O)
(needs /system, /cache, /data partitions formatted to EXT4)
a) removes journalism
Code:
tune2fs -o journal_data_writeback /block/path/to/system
tune2fs -O ^has_journal /block/path/to/system
tune2fs -o journal_data_writeback /block/path/to/cache
tune2fs -O ^has_journal /block/path/to/cache
tune2fs -o journal_data_writeback /block/path/to/data
tune2fs -O ^has_journal /block/path/to/data
b) perfect mount options
Code:
busybox mount -o remount,noatime,noauto_da_alloc,nodiratime,barrier=0,nobh /system
busybox mount -o remount,noatime,noauto_da_alloc,nosuid,nodev,nodiratime,barrier=0,nobh /data
busybox mount -o remount,noatime,noauto_da_alloc,nosuid,nodev,nodiratime,barrier=0,nobh /cache
7. Flags blocks as non-rotational and increases cache size
Code:
LOOP=`ls -d /sys/block/loop*`;
RAM=`ls -d /sys/block/ram*`;
MMC=`ls -d /sys/block/mmc*`;
for j in $LOOP $RAM
do
echo "0" > $j/queue/rotational;
echo "2048" > $j/queue/read_ahead_kb;
done
8. microSD card speed tweak
Code:
echo "2048" > /sys/devices/virtual/bdi/179:0/read_ahead_kb;
9. Defrags database files
Code:
for i in \
`find /data -iname "*.db"`
do \
sqlite3 $i 'VACUUM;';
done
9. Remove logger
Code:
rm /dev/log/main
10. Ondemand governor tweaks
Code:
SAMPLING_RATE=$(busybox expr `cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency` \* 750 / 1000)
echo 95 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
echo $SAMPLING_RATE > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
11. Auto change governor and I/O Scheduler
a) I/O Scheduler (Best: MTD devices - VR; EMMC devices - SIO) - needs kernel with these
Code:
echo "vr" > /sys/block/mmcblk0/queue/scheduler
or
echo "sio" > /sys/block/mmcblk0/queue/scheduler
b) Governor (Best: Minmax > SavagedZen > Smoothass > Smartass > Interactive) - needs kernel with these
Code:
echo "governor-name-here" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
12. Auto-zipalign on boot
(needs zipalign bin)
Code:
[url]http://forum.xda-developers.com/showthread.php?t=860586[/url]
13. Loopy Smoothness tweak
Code:
[url]http://forum.xda-developers.com/showthread.php?t=1137554[/url]
[url]http://forum.xda-developers.com/showthread.php?t=1205744[/url]
14. Move dalvik-cache to cache partition (if it's big enough) to free up data partition space
Code:
CACHESIZE=$(df -k /cache | tail -n1 | tr -s ' ' | cut -d ' ' -f2)
if [ $CACHESIZE -gt 80000 ]
then
echo "Large cache detected, moving dalvik-cache to /cache"
if [ ! -d /cache/dalvik-cache ]
then
busybox rm -rf /cache/dalvik-cache /data/dalvik-cache
mkdir /cache/dalvik-cache /data/dalvik-cache
fi
busybox chown 1000:1000 /cache/dalvik-cache
busybox chmod 0771 /cache/dalvik-cache
# bind mount dalvik-cache so we can still boot without the sdcard
busybox mount -o bind /cache/dalvik-cache /data/dalvik-cache
busybox chown 1000:1000 /data/dalvik-cache
busybox chmod 0771 /data/dalvik-cache
else
echo "Small cache detected, dalvik-cache will remain on /data"
fi
15. Disable normalize sleeper
Code:
mount -t debugfs none /sys/kernel/debug
echo NO_NORMALIZED_SLEEPER > /sys/kernel/debug/sched_features
16. OOM groupings and priorities tweaks - SuperCharger
Code:
[url]http://forum.xda-developers.com/showthread.php?t=991276[/url]
GPS.conf
(create or edit your /system/etc/gps.conf with a file manager with root access)
For improving GPS lock time and signal.
a) European NTP server (replace for america or asia in your case)
Code:
NTP_SERVER=europe.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
b) SE supl for A-GPS (better than Nokia's or Google's)
Code:
SUPL_HOST=supl.sonyericsson.com
SUPL_PORT=7275
Other tweaks or guidelines
1. Patch your hosts file for blocking Ads
(please think before doing this; many developers are supported through this way)
Code:
You can use AdFree application for this or changing manually your hosts file.
Here are some databases:
http://www.mvps.org/winhelp2002/hosts.txt
http://pgl.yoyo.org/adservers/serverlist.php?showintro=0;hostformat=hosts
2. Use CyanogenMOD's APN list file - it's one of the most complete.
Code:
It's located in /system/etc/apns-conf.xml
3. Use UOT kitchen for basic theming on your device.
Code:
http://uot.dakra.lt/
4. Use Google's dns servers
Code:
Create an empty file, name it resolv.conf and put there these 2 lines:
nameserver 8.8.8.8
nameserver 8.8.4.4
Save to /system/etc/.
5. Update Superuser and su binary to latest version (3.0 beta)
Code:
http://goo-inside.me/superuser/
6. Disable sync feature in sqlite
(author: ownhere - needs a source for your device so you can compile the /system/lib/libsqlite.so)
Code:
Patch file here: http://forum.xda-developers.com/showthread.php?t=903507
7. Do not use task killers.
sysctl_tweaks and sysctl.conf tweaks
added by krabappel2548 Thank him
To make them work:
1. make a new file in /system/etc/init.d, name it sysctl_tweaks
2. make a new file in /system/etc, name it sysctl.conf
3. Paste the right code in the right file
1. sysctl_tweaks
Code:
#!/system/bin/sh
# grep sysctl /etc/init.d/*
/etc/init.d/02vm:# Load /sys/etc/sysctl.conf
/etc/init.d/02vm:sysctl -p
2. sysctl.conf
Code:
#sysctl.conf file
############################
# Battery life tweaks #
############################
sysctl -w vm.dirty_writeback_centisecs=3000;
sysctl -w vm.dirty_expire_centisecs=500;
############################
# kernel tweaks #
############################
sysctl -w kernel.sched_features=15834233;
sysctl -w kernel.msgmni=1024;
sysctl -w kernel.msgmax=64000;
sysctl -w kernel.shmmax=268435456;
sysctl -w kernel.shmall=2097152;
sysctl -w kernel.sem="500 512000 100 2048";
sysctl -w kernel.hung_task_timeout_secs=0;
sysctl -w kernel.sched_latency_ns=18000000;
sysctl -w kernel.sched_compat_yield=1;
sysctl -w kernel.sched_shares_ratelimit=256000;
sysctl -w kernel.sched_child_runs_first=0;
sysctl -w kernel.threads-max=10000;
sysctl -w kernel.panic=30;
sysctl -w kernel.panic_on_oops=1;
sysctl -w kernel.sched_features=24189;
sysctl -w kernel.sched_min_granularity_ns=1500000;
sysctl -w kernel.sched_wakeup_granularity_ns=3000000;
############################
# CPU tweaks #
############################
# Queue size modifications
sysctl -w net.core.optmem_max=20480;
sysctl -w net.unix.max_dgram_qlen=50;
# Net Core Settings
# Location: /proc/sys/net/core
sysctl -w net.core.wmem_max=524288;
sysctl -w net.core.rmem_max=524288;
sysctl -w net.core.rmem_default=256960;
sysctl -w net.core.wmem_default=256960;
############################
# VM & Filesystem tweaks #
############################
sysctl -w fs.lease-break-time=10;
sysctl -w fs.file-max=65536;
sysctl -w vm.overcommit_memory=1;
sysctl -w vm.min_free_order_shift=4;
sysctl -w vm.block_dump=0;
sysctl -w vm.oom_dump_tasks=1;
sysctl -w vm.page-cluster=3;
############################
# Net Speed tweaks #
############################
# UnderUtilized Networking Tweaks below as recommended by avgjoemomma (from XDA)
sysctl -w net.ipv4.tcp_congestion_control=cubic;
# Hardening the TCP/IP stack to SYN attacks
sysctl -w net.ipv4.tcp_syncookies=1;
sysctl -w net.ipv4.conf.all.rp_filter=1;
sysctl -w net.ipv4.conf.default.rp_filter=1;
sysctl -w net.ipv4.tcp_synack_retries=2;
sysctl -w net.ipv4.tcp_syn_retries=2;
sysctl -w net.ipv4.tcp_max_syn_backlog=1024;
sysctl -w net.ipv4.tcp_max_tw_buckets=16384;
sysctl -w net.ipv4.icmp_echo_ignore_all=1;
sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1;
sysctl -w net.ipv4.tcp_no_metrics_save=1;
sysctl -w net.ipv4.tcp_fin_timeout=15;
sysctl -w net.ipv4.tcp_keepalive_time=1800;
sysctl -w net.ipv4.ip_forward=0;
sysctl -w net.ipv4.tcp_moderate_rcvbuf=1;
sysctl -w net.ipv4.route.flush=1;
sysctl -w net.ipv4.udp_rmem_min=6144;
sysctl -w net.ipv4.udp_wmem_min=6144;
sysctl -w net.ipv4.tcp_rfc1337=1;
sysctl -w net.ipv4.ip_no_pmtu_disc=0;
sysctl -w net.ipv4.tcp_ecn=0;
sysctl -w net.ipv4.tcp_sack=1;
sysctl -w net.ipv4.tcp_fack=1;
# Don't accept source routing
sysctl -w net.ipv4.conf.default.accept_source_route=0 ;
sysctl -w net.ipv4.conf.all.accept_source_route=0;
# Don't accept redirects
sysctl -w net.ipv4.conf.all.accept_redirects=0;
sysctl -w net.ipv4.conf.default.accept_redirects=0;
sysctl -w net.ipv4.conf.all.secure_redirects=0;
sysctl -w net.ipv4.conf.default.secure_redirects=0;
This is another init.d tweak It's a battery calibration script
3. This is my battery calibration tweak
Code:
#!/system/bin/sh
# ========================================
# init.d script for KA Xperia SSpeed
# made by krabappel2548
# ========================================
SLEEP=120
if [ -e /data/.battery-calibrated ] ; then
exit 0
fi
(
while : ; do
LEVEL=$(cat /sys/class/power_supply/battery/capacity)
CUR=$(cat /sys/class/power_supply/battery/batt_current)
if [ "$LEVEL" == "100" ] && [ "$CUR" == "0" ] ; then
log -p i -t battery-calibration "*** LEVEL: $LEVEL CUR: $CUR***: calibrating..."
rm -f /data/system/batterystats.bin
touch /data/.battery-calibrated
exit 0
fi
# log -p i -t battery-calibration "*** LEVEL: $LEVEL CUR: $CUR ***: sleeping for $SLEEP s..."
sleep $SLEEP
done
) &
#Disable normalize sleeper
mount -t debugfs none /sys/kernel/debug
echo NO_NORMALIZED_SLEEPER > /sys/kernel/debug/sched_features
#battery tweaks (sleepers)
mount -t debugfs none /sys/kernel/debug
echo NO_NEW_FAIR_SLEEPERS > /sys/kernel/debug/sched_features;
echo NO_NORMALIZED_SLEEPERS > /sys/kernel/debug/sched_features;
umount /sys/kernel/debug
Tips Combined twaks and apps
Still testing better values to add!
1. incredibile fast browsing in zoomed pages with no shutters!
♦ VM Heapsize; higher the RAM, higher the hp can be
Code:
dalvik.vm.heapsize=96m
♦ Helps scrolling responsiveness
Code:
windowsmgr.max_events_per_sec=250
♦ Opera Mobile Browser
2. Faster internet speed
♦ Signal (3G) tweaks
Code:
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
♦ Net speed tweaks
Code:
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
Alright, I think this is it for now.
If you have any other tweaks or better values, you can PM me and I'll include them
thanks to
kenzo
krabappel2548

---

thanks ve been waiting for this

---

Nice work been looking for some of these
Sent from my LT26i using xda premium

---

can i use it for xperia u?

---

10/40 said:
can i use it for xperia u?
Click to expand...
Click to collapse
Yes you can.
Sent from my LT26i using Tapatalk 2

---

gm007 said:
Yes you can.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
thx ...have to try it, soon

---

added Tweaks Combination to make it easier to understand for new people

---

nice job u done here very useful,
The Mods should make this thread sticky

---

May I put those scripts everywhere I can in build.prop ?

---

mpttrung said:
May I put those scripts everywhere I can in build.prop ?
Click to expand...
Click to collapse
nope add them at the end of the page and leave a free row between them to avoid problems

---

WebMuth said:
nope add them at the end of the page and leave a free row between them to avoid problems
Click to expand...
Click to collapse
ok, thanks ! lets me check it out

---

optik19918 said:
4. Render UI with GPU
Code:
debug.sf.hw=1
Click to expand...
Click to collapse
This one was already added by Sony in build.prop
optik19918 said:
7. Save battery
Code:
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
Click to expand...
Click to collapse
I tested these a while ago and found them not effective. I even experienced less battery drain without these 2 lines
optik19918 said:
10. Raise photo and video recording quality
Code:
ro.media.dec.jpeg.memcap=8000000
Click to expand...
Click to collapse
I'm not sure if these help because we have 12mp camera and not 8.
optik19918 said:
b) SE supl for A-GPS (better than Nokia's or Google's)
Code:
SUPL_HOST=supl.sonyericsson.com
SUPL_PORT=7275
Click to expand...
Click to collapse
These are also already added by Sony
btw I'll post some more tweaks here later so you can add them to first post

---

krabappel2548 said:
This one was already added by Sony in build.prop
I tested these a while ago and found them not effective. I even experienced less battery drain without these 2 lines
I'm not sure if these help because we have 12mp camera and not 8.
These are also already added by Sony
btw I'll post some more tweaks here later so you can add them to first post
Click to expand...
Click to collapse
thanks for all i'l update when i go home now i'm at work!
some values are wrong becose i have those tweaks since the time of the x10
and i left the one already added by Sony in build.prop to make them easier to understand
Sent from my LT26i using xda premium

---

Here are some more tweaks Feel free to add them to the first post
To make them work:
1. make a new file in /system/etc/init.d, name it sysctl_tweaks
2. make a new file in /system/etc, name it sysctl.conf
3. Paste the right code in the right file
1. sysctl_tweaks
Code:
#!/system/bin/sh
# grep sysctl /etc/init.d/*
/etc/init.d/02vm:# Load /sys/etc/sysctl.conf
/etc/init.d/02vm:sysctl -p
2. sysctl.conf
Code:
#sysctl.conf file
############################
# Battery life tweaks #
############################
sysctl -w vm.dirty_writeback_centisecs=3000;
sysctl -w vm.dirty_expire_centisecs=500;
############################
# kernel tweaks #
############################
sysctl -w kernel.sched_features=15834233;
sysctl -w kernel.msgmni=1024;
sysctl -w kernel.msgmax=64000;
sysctl -w kernel.shmmax=268435456;
sysctl -w kernel.shmall=2097152;
sysctl -w kernel.sem="500 512000 100 2048";
sysctl -w kernel.hung_task_timeout_secs=0;
sysctl -w kernel.sched_latency_ns=18000000;
sysctl -w kernel.sched_compat_yield=1;
sysctl -w kernel.sched_shares_ratelimit=256000;
sysctl -w kernel.sched_child_runs_first=0;
sysctl -w kernel.threads-max=10000;
sysctl -w kernel.panic=30;
sysctl -w kernel.panic_on_oops=1;
sysctl -w kernel.sched_features=24189;
sysctl -w kernel.sched_min_granularity_ns=1500000;
sysctl -w kernel.sched_wakeup_granularity_ns=3000000;
############################
# CPU tweaks #
############################
# Queue size modifications
sysctl -w net.core.optmem_max=20480;
sysctl -w net.unix.max_dgram_qlen=50;
# Net Core Settings
# Location: /proc/sys/net/core
sysctl -w net.core.wmem_max=524288;
sysctl -w net.core.rmem_max=524288;
sysctl -w net.core.rmem_default=256960;
sysctl -w net.core.wmem_default=256960;
############################
# VM & Filesystem tweaks #
############################
sysctl -w fs.lease-break-time=10;
sysctl -w fs.file-max=65536;
sysctl -w vm.overcommit_memory=1;
sysctl -w vm.min_free_order_shift=4;
sysctl -w vm.block_dump=0;
sysctl -w vm.oom_dump_tasks=1;
sysctl -w vm.page-cluster=3;
############################
# Net Speed tweaks #
############################
# UnderUtilized Networking Tweaks below as recommended by avgjoemomma (from XDA)
sysctl -w net.ipv4.tcp_congestion_control=cubic;
# Hardening the TCP/IP stack to SYN attacks
sysctl -w net.ipv4.tcp_syncookies=1;
sysctl -w net.ipv4.conf.all.rp_filter=1;
sysctl -w net.ipv4.conf.default.rp_filter=1;
sysctl -w net.ipv4.tcp_synack_retries=2;
sysctl -w net.ipv4.tcp_syn_retries=2;
sysctl -w net.ipv4.tcp_max_syn_backlog=1024;
sysctl -w net.ipv4.tcp_max_tw_buckets=16384;
sysctl -w net.ipv4.icmp_echo_ignore_all=1;
sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1;
sysctl -w net.ipv4.tcp_no_metrics_save=1;
sysctl -w net.ipv4.tcp_fin_timeout=15;
sysctl -w net.ipv4.tcp_keepalive_time=1800;
sysctl -w net.ipv4.ip_forward=0;
sysctl -w net.ipv4.tcp_moderate_rcvbuf=1;
sysctl -w net.ipv4.route.flush=1;
sysctl -w net.ipv4.udp_rmem_min=6144;
sysctl -w net.ipv4.udp_wmem_min=6144;
sysctl -w net.ipv4.tcp_rfc1337=1;
sysctl -w net.ipv4.ip_no_pmtu_disc=0;
sysctl -w net.ipv4.tcp_ecn=0;
sysctl -w net.ipv4.tcp_sack=1;
sysctl -w net.ipv4.tcp_fack=1;
# Don't accept source routing
sysctl -w net.ipv4.conf.default.accept_source_route=0 ;
sysctl -w net.ipv4.conf.all.accept_source_route=0;
# Don't accept redirects
sysctl -w net.ipv4.conf.all.accept_redirects=0;
sysctl -w net.ipv4.conf.default.accept_redirects=0;
sysctl -w net.ipv4.conf.all.secure_redirects=0;
sysctl -w net.ipv4.conf.default.secure_redirects=0;
This is another init.d tweak It's a battery calibration script
3. This is my battery calibration tweak
Code:
#!/system/bin/sh
# ========================================
# init.d script for KA Xperia SSpeed
# made by krabappel2548
# ========================================
SLEEP=120
if [ -e /data/.battery-calibrated ] ; then
exit 0
fi
(
while : ; do
LEVEL=$(cat /sys/class/power_supply/battery/capacity)
CUR=$(cat /sys/class/power_supply/battery/batt_current)
if [ "$LEVEL" == "100" ] && [ "$CUR" == "0" ] ; then
log -p i -t battery-calibration "*** LEVEL: $LEVEL CUR: $CUR***: calibrating..."
rm -f /data/system/batterystats.bin
touch /data/.battery-calibrated
exit 0
fi
# log -p i -t battery-calibration "*** LEVEL: $LEVEL CUR: $CUR ***: sleeping for $SLEEP s..."
sleep $SLEEP
done
) &
#Disable normalize sleeper
mount -t debugfs none /sys/kernel/debug
echo NO_NORMALIZED_SLEEPER > /sys/kernel/debug/sched_features
#battery tweaks (sleepers)
mount -t debugfs none /sys/kernel/debug
echo NO_NEW_FAIR_SLEEPERS > /sys/kernel/debug/sched_features;
echo NO_NORMALIZED_SLEEPERS > /sys/kernel/debug/sched_features;
umount /sys/kernel/debug

---

Big thanks for krabappel and optik!!
Sent from my Sony Xperia™ S

---

@krabappel2548: are the tweaks you posted already in your ka08 rom?

---

Apology11 said:
@krabappel2548: are the tweaks you posted already in your ka08 rom?
Click to expand...
Click to collapse
Yes
Sent from my LT26i using XDA

---

@Optik @Krabappel
i've just added all tweaks right now...bt i recognized my benchmark decreased it's now 6693 and it was 6900..im using doomkernel..maybe some tweaks or not compatible with it??

---

I added ro.mot.buttonlight.timeout=0 in the end of build.prop but it doesn't seem to have effect. Reboot didn't help either.
amfirbek92 said:
@Optik @Krabappel
i've just added all tweaks right now...bt i recognized my benchmark decreased it's now 6693 and it was 6900..im using doomkernel..maybe some tweaks or not compatible with it??
Click to expand...
Click to collapse
Stop looking at synthetic benchmark scores if your phone otherwise feels snappy.

---

mikbe said:
I added ro.mot.buttonlight.timeout=0 in the end of build.prop but it doesn't seem to have effect. Reboot didn't help either.
Stop looking at synthetic benchmark scores if your phone otherwise feels snappy.
Click to expand...
Click to collapse
Just removed ondemand governor tweak..everything seems very good now..and the benchmark is around 7400
Sent from my Sony Xperia™ S