[Q] problem with enabling wifi dual band and bust mode - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

Hi
I have followed this tutorial
http://forum.xda-developers.com/showthread.php?t=1568792
When i open tiwlan.ini i cann't find ht-enable , burstmodeenable , wifi adhoc
I can only find signle dual band solution and i change it ti 1
I have xpere mini with ics

Some of these are definitely there, use Search.
Sent from my Xperia Live using xda premium

Someguyfromhell said:
Some of these are definitely there, use Search.
Sent from my Xperia Live using xda premium
Click to expand...
Click to collapse
I have searched buy search tools and i found no thing .. I will put all thing from here
:
# tiwlan-ayame-gen.ini
# Note: The letters in this file are NOT case sensitive.
#=========================== Radio parameters - Start ========================
#--------------------- General Radio Parameters ------------------------
TXBiPFEMAutoDetect = 0 # Unit: Options (0: Manual Mode; 1: Automatic mode), Format: Unsigned, Source: Customer
TXBiPFEMManufacturer = 1 # Unit: Options(Bit 0 - Manufacturer (0: FEM0-RFMD; 1: FEM1-TQS),
# Bit 4..7: Version number ),
# Format: Unsigned, Source: Customer
RefClk = 0 # Unit: Options 5'bXX000 : Bit 0,1,2 - (0: 19.2MHz; 1: 26MHz; 2: 38.4MHz (Default); 3: 52MHz; 4: 38.4MHz XTAL) ;
# 5'bX0XXX : Bit 3 - CLK_REQ type; 0 = wired-OR (Default) , 1= push-pull
# 5'b0XXXX : Bit 4 - CLK_REQ polarity; 0 = Normal (Default) , 1=Inverted, Format: Unsigned, Source: Customer
SettlingTime = 5 # Unit: ms (range 0-15), Format: Unsigned, Source: Customer
ClockValidOnWakeup = 0 # Unit: Options (0: Reference clock not valid; 1: Reference clock is valid and stable), Format: Unsigned, Source: Customer
DC2DCMode = 0 # Unit: Options (Bit0: DC2DC mode (0: btSPI is not used;1: btSPI used mux DC2DC to BT_FUNC2),
# Bit1: Level shifter support (0: No LS, 1: With LS) )
# Format: Unsigned, Source: Customer
Single_Dual_Band_Solution = 0 # Unit: Options (0: Single band. 2.4GHz only; 1: Dual band = 2.4GHz and 5GHz solution), Format: Unsigned, Source: Customer
Settings = 65 # Unit: Options (Bit0: NBI (0: Off; 1: On), Bit1: Telec channel 14 (0: Off; 1: On),
SRState = 00 # Length: 1; Unit: Options (0: Disabled, 1: Enabled); Format: Decimal; Source: TI; Comment: Smart Reflax (proprietary mechanism of TI that identify the # Bit2: FEM0-LB, Bit3: FEM0-HB, Bit4: FEM1-LB, Bit5: FEM1-HB - TX BiP load (0: Internal; 1: External),
# Bit6: LPD Low band, Bit7: LPD High band
# Format: Unsigned, Source: Customer
SRF1 = 07,03,18,10,05,fb,f0,e8,00,00,00,00,00,00,0f,3f # Unit: SRF1 values, Format: Signed, Source: TI
SRF2 = 07,03,18,10,05,f6,f0,e8,00,00,00,00,00,00,00,00 # Unit: SRF2 values, Format: Signed, Source: TI
SRF3 = 07,03,18,10,05,fb,f0,e8,00,00,00,00,00,00,00,00 # Unit: SRF3 values, Format: Signed, Source: TI
RxTraceInsertionLoss_2_4G = 0 # Unit: 1/8dB, Format: Unsigned, Source: Customer
TXTraceLoss_2_4G = 24 # Unit: 1/8dB, Format: Unsigned, Source: Customer
RxRssiAndProcessCompensation_2_4G = ec,f6,00,0c,18,f8,fc,00,08,10,f0,f8,00,0a,14 # Unit: 1/8dB, Format: Signed, Source: TI
#-------------------- Radio parameters for TQS_S_2.6 ---------------
# (for Single bend 2.4G parameters FEM1 (TQS 2.5) HDK20)
FEM1_TXBiPReferencePDvoltage_2_4G = 0177 # Unit: 1mV, Format: Unsigned, Source: TI
FEM1_TxBiPReferencePower_2_4G = 80 # Unit: 1/8dB, Format: Signed, Source: TI
FEM1_TxBiPOffsetdB_2_4G = 0 # Unit: 1/8dB, Format: Signed, Source: Customer
FEM1_TxPerRatePowerLimits_2_4G_Normal = 20,22,22,22,22,29 # Unit: 1/2dB, Format: Signed, Source: Customer
FEM1_TxPerRatePowerLimits_2_4G_Degraded = 1d,1d,1d,1d,1d,28 # Unit: 1/2dB, Format: Signed, Source: Customer
FEM1_TxPerRatePowerLimits_2_4G_Extreme = 19,19,19,19,19,25 # Unit: 1/2dB, Format: Signed, Source: Customer
FEM1_DegradedLowToNormalThr_2_4G = 30 # Unit: 1/10 volts, Format: Unsigned, Source: TI
FEM1_NormalToDegradedHighThr_2_4G = 45 # Unit: 1/10 volts, Format: Unsigned, Source: TI
FEM1_TxPerChannelPowerLimits_2_4G_11b = 50,50,50,50,50,50,50,50,50,50,50,50,50,50 # Unit: 1/2dB, Format: Signed, Source: Customer
FEM1_TxPerChannelPowerLimits_2_4G_OFDM = 50,50,50,50,50,50,50,50,50,50,50,50,50,50 # Unit: 1/2dB, Format: Signed, Source: Customer
FEM1_TxPDVsRateOffsets_2_4G = 01,02,02,02,02,00 # Unit: 1/8dB, Format: Signed, Source: TI
FEM1_TxIbiasTable_2_4G = 11,11,15,11,15,0f # Unit: Codeword, Format: Unsigned, Source: TI/SEMC
FEM1_RxFemInsertionLoss_2_4G = 14 # Unit: 1/8dB, Format: Unsigned, Source: TI
# ---------------------------------------------------------------------
#-------------------- Radio parameters for RFMD_S_3.0 ---------------
#FEM1_TXBiPReferencePDvoltage_2_4G = 356 # Unit: 1mV, Format: Unsigned, Source: TI
#FEM1_TxBiPReferencePower_2_4G = 128 # Unit: 1/8dB, Format: Signed, Source: TI
#FEM1_TxBiPOffsetdB_2_4G = 0 # Unit: 1/8dB, Format: Signed, Source: Customer
#FEM1_TxPerRatePowerLimits_2_4G_Normal = 50,50,50,50,50,50 # Unit: 1/2dB, Format: Signed, Source: Customer
#FEM1_TxPerRatePowerLimits_2_4G_Degraded = 50,50,50,50,50,50 # Unit: 1/2dB, Format: Signed, Source: Customer
#FEM1_TxPerRatePowerLimits_2_4G_Extreme = 50,50,50,50,50,50 # Unit: 1/2dB, Format: Signed, Source: Customer
#FEM1_DegradedLowToNormalThr_2_4G = 30 # Unit: 1/10 volts, Format: Unsigned, Source: TI
#FEM1_NormalToDegradedHighThr_2_4G = 45 # Unit: 1/10 volts, Format: Unsigned, Source: TI
#FEM1_TxPerChannelPowerLimits_2_4G_11b = 50,50,50,50,50,50,50,50,50,50,50,50,50,50 # Unit: 1/2dB, Format: Signed, Source: Customer
#FEM1_TxPerChannelPowerLimits_2_4G_OFDM = 50,50,50,50,50,50,50,50,50,50,50,50,50,50 # Unit: 1/2dB, Format: Signed, Source: Customer
#FEM1_TxPDVsRateOffsets_2_4G = 01,02,02,02,02,00 # Unit: 1/8dB, Format: Signed, Source: TI
#FEM1_TxIbiasTable_2_4G = 15,15,1a,1f,1f,2f # Unit: Codeword, Format: Unsigned, Source: TI
#FEM1_RxFemInsertionLoss_2_4G = 16 # Unit: 1/8dB, Format: Unsigned, Source: TI
# ---------------------------------------------------------------------
#-------------------- Radio parameters for TQS_S_2.5 ---------------
#FEM1_TXBiPReferencePDvoltage_2_4G = 375 # Unit: 1mV, Format: Unsigned, Source: TI
#FEM1_TxBiPReferencePower_2_4G = 128 # Unit: 1/8dB, Format: Signed, Source: TI
#FEM1_TxBiPOffsetdB_2_4G = 0 # Unit: 1/8dB, Format: Signed, Source: Customer
#FEM1_TxPerRatePowerLimits_2_4G_Normal = 1d,1f,22,26,28,29 # Unit: 1/2dB, Format: Signed, Source: Customer
#FEM1_TxPerRatePowerLimits_2_4G_Degraded = 1a,1f,22,24,26,28 # Unit: 1/2dB, Format: Signed, Source: Customer
#FEM1_TxPerRatePowerLimits_2_4G_Extreme = 16,1d,1e,20,24,25 # Unit: 1/2dB, Format: Signed, Source: Customer
#FEM1_DegradedLowToNormalThr_2_4G = 30 # Unit: 1/10 volts, Format: Unsigned, Source: TI
#FEM1_NormalToDegradedHighThr_2_4G = 45 # Unit: 1/10 volts, Format: Unsigned, Source: TI
#FEM1_TxPerChannelPowerLimits_2_4G_11b = 50,50,50,50,50,50,50,50,50,50,50,50,50,50 # Unit: 1/2dB, Format: Signed, Source: Customer
#FEM1_TxPerChannelPowerLimits_2_4G_OFDM = 50,50,50,50,50,50,50,50,50,50,50,50,50,50 # Unit: 1/2dB, Format: Signed, Source: Customer
#FEM1_TxPDVsRateOffsets_2_4G = 01,02,02,02,02,00 # Unit: 1/8dB, Format: Signed, Source: TI
#FEM1_TxIbiasTable_2_4G = 15,15,15,11,15,15 # Unit: Codeword, Format: Unsigned, Source: TI/SEMC
#FEM1_RxFemInsertionLoss_2_4G = 14 # Unit: 1/8dB, Format: Unsigned, Source: TI
# ---------------------------------------------------------------------
#=========================== Radio parameters - End ==========================
Click to expand...
Click to collapse

Same here, i think its because your in ics, back then when im in gb i found all of that but when i upgrade to ics only burstmode i did found

lyrel09 said:
Same here, i think its because your in ics, back then when im in gb i found all of that but when i upgrade to ics only burstmode i did found
Click to expand...
Click to collapse
Is burstmode enough ?
I don't want to go back to the old qndroid version ..
My ics has only signly ...
s u can see .. Any one help ?

Single_Dual_Band_Solution = 0
Change to 1.
That was the one on ICS.

Someguyfromhell said:
Single_Dual_Band_Solution = 0
Change to 1.
That was the one on ICS.
Click to expand...
Click to collapse
I tried it .. The gb is better in this thing .. If u find another way telk me plzz because
I think it is not enough !

Related

Modded SemcCamera / 100% JPeg compression

EDIT: After poking around in the driver code and comparing results of different camera apps, the following seems to be fact:
1. The driver only supports picture format JPEG (at least on its external interface). So ALL camera apps will get a jpeg from the driver.
2. The driver is always using 2x2 chroma subsampling (which is the main reason for the "poor"(?) image quality).
3. The quality of the compression can be adjusted by using the standard API call CameraParamter.setJpegQuality(0-100). The driver default seems to be 85.
4. However, after several testshots i can't make out any visual difference between the shots made with standard or 100% compression. Technically the 100% version uses better huffmann and quantation tables but this doesn't seem to effect the visual quality.
5. libmmjpeg.so is used for compression (an undocumented qcom jpeg lib). I had no success so far getting better results from the lib. There are some functions like "jpege_get_default_config" which seem the perfect place for patching, but i was unable to figure out the meaning of the various parameters.
6. libcald*.so is used for picture processing (image stablizing, postprocessing etc), so this would be the place for manipulations of the postprocessing pipeline.
6. Third party camera apps like "camera360", "camera fx", etc are unable to produce better compression results (though they seem to). In fact, f.e. camera360 is using the standard driver jpeg compression when set to 100% and is reencoding(!!) the jpeg when set to anything less then 100% (which means the jpeg is probably bigger after reencoding but will be never be better as the source was already crippled. Reencoding also can add several new compression artifacts.) They still might be able to produce better pictures by chosing better parameters for wb,ev... though.
7. The reason for "camera not found" with the modded apk was the some missing permissions. I already did a new apk which could be installed side-by-side with the standard app (i renamed the package structure), but until i find some way to get more quality from the driver releasing/maintaining it would be pointless. For the same reason i removed the old apk from the post.
Here is the blueprint to do the mod yourself (f.e. for other roms/devices):
Code:
You need apktool, SignApk, zipalign (search via forum).
- Copy system/app/SemcCameraUI.apk to your pc
- Copy system/framework/SemcGenericUxpRes.apk to your pc
- Copy system/framework/framework-res.apk to your pc
- apktool if framework-res.apk
- apktool if SemcGenericUxpRes.apk
- apktool d SemcCameraUI.apk
- find file "CameraController.smali" in extraced folder "SemcCameraUI\smali\com\sonyericsson\android\camera"
- insert these two lines at line 994[2.3.4 stock] (next line after "setRotation")
const/16 v1, 0x64
invoke-virtual {v0, v1}, Landroid/hardware/Camera$Parameters;->setJpegQuality(I)V
- rename the folder camera to cameraX and change all occurences of "com/sonyericsson/android/camera" to "com/sonyericsson/android/cameraX" in all files. Do the same for "com.sonyericcson.android.camera".
- choose a new name for the app (like "Camera 100") and change all references in res/values*/string.xml.
- rename the folder SemcCameraUI to SemcCameraX
- apktool b SemcCameraX
- java -jar SignApk.jar certificate.pem key.pk8 <your new SemcCameraX.apk> signed-SemcCameraX.apk
- zipalign -v 4 signed-SemcCameraX.apk SemcCameraX.apk
- install apk
- transform apk to system app (f.e. using Titanium Backup), otherwise you can't open camera device
APK attached (EDIT: removed)
Example pics:
Stock
JpegSnoopResult:
Code:
JPEGsnoop 1.5.2 by Calvin Hass
http://www.impulseadventure.com/photo/
-------------------------------------
Filename: [C:\Dokumente und Einstellungen\games\Eigene Dateien\Dropbox\privat\telefon\stock.JPG]
Filesize: [832205] Bytes
Start Offset: 0x00000000
*** Marker: SOI (xFFD8) ***
OFFSET: 0x00000000
*** Marker: APP1 (xFFE1) ***
OFFSET: 0x00000002
length = 7612
Identifier = [Exif]
Identifier TIFF = 0x[4D4D002A 00000008]
Endian = Motorola (big)
TAG Mark x002A = 0x002A
EXIF IFD0 @ Absolute 0x00000014
Dir Length = 0x000A
[Make ] = "Sony Ericsson"
[Model ] = "MT15i"
[Orientation ] = Row 0: top, Col 0: left
[XResolution ] = 72/1
[YResolution ] = 72/1
[ResolutionUnit ] = Inch
[Software ] = "4.0.1.A.0.283_2d_f200"
[DateTime ] = "2011:10:18 13:07:41"
[YCbCrPositioning ] = Centered
[ExifOffset ] = @ 0x00D4
Offset to Next IFD = 0x00000270
EXIF IFD1 @ Absolute 0x0000027C
Dir Length = 0x0007
[Compression ] = JPEG
[XResolution ] = 72/1
[YResolution ] = 72/1
[ResolutionUnit ] = Inch
[JpegIFOffset ] = @ +0x02DA = @ 0x02E6
[JpegIFByteCount ] = 6874
Offset to Next IFD = 0x00000000
EXIF SubIFD @ Absolute 0x000000E0
Dir Length = 0x0018
[ExposureTime ] = 10/500 s
[FNumber ] = F2.4
[ISOSpeedRatings ] = 160
[ExifVersion ] = 02.20
[DateTimeOriginal ] = "2011:10:18 13:07:41"
[DateTimeDigitized ] = "2011:10:18 13:07:41"
[ComponentsConfiguration ] = [Y Cb Cr .]
[ShutterSpeedValue ] = 564/100
[ExposureBiasValue ] = 0.00 eV
[MeteringMode ] = CenterWeightedAverage
[LightSource ] = unknown
[Flash ] = Flash did not fire
[FocalLength ] = 4 mm
[FlashPixVersion ] = 01.00
[ColorSpace ] = sRGB
[ExifImageWidth ] = 3264
[ExifImageHeight ] = 2448
[ExifInteroperabilityOffset ] = @ 0x0252
[CustomRendered ] = Normal process
[ExposureMode ] = Auto exposure
[WhiteBalance ] = Auto white balance
[DigitalZoomRatio ] = 100/100
[SceneCaptureType ] = Standard
[SubjectDistanceRange ] = 0
EXIF InteropIFD @ Absolute 0x0000025E
Dir Length = 0x0002
[InteroperabilityIndex ] = "R98"
[InteroperabilityVersion ] = 01.00
*** Marker: DQT (xFFDB) ***
Define a Quantization Table.
OFFSET: 0x00001DC0
Table length = 132
----
Precision=8 bits
Destination ID=0 (Luminance)
DQT, Row #0: 4 3 3 4 6 10 13 16
DQT, Row #1: 3 3 4 5 7 15 16 14
DQT, Row #2: 4 3 4 6 10 15 18 15
DQT, Row #3: 4 4 6 8 13 23 21 16
DQT, Row #4: 5 6 10 15 18 28 27 20
DQT, Row #5: 6 9 14 17 21 27 29 24
DQT, Row #6: 13 17 20 23 27 31 31 26
DQT, Row #7: 19 24 25 25 29 26 27 26
Approx quality factor = 86.93 (scaling=26.13 variance=1.22)
----
Precision=8 bits
Destination ID=1 (Chrominance)
DQT, Row #0: 4 5 6 12 26 26 26 26
DQT, Row #1: 5 5 7 17 26 26 26 26
DQT, Row #2: 6 7 15 26 26 26 26 26
DQT, Row #3: 12 17 26 26 26 26 26 26
DQT, Row #4: 26 26 26 26 26 26 26 26
DQT, Row #5: 26 26 26 26 26 26 26 26
DQT, Row #6: 26 26 26 26 26 26 26 26
DQT, Row #7: 26 26 26 26 26 26 26 26
Approx quality factor = 86.91 (scaling=26.18 variance=0.37)
*** Marker: SOF0 (Baseline DCT) (xFFC0) ***
OFFSET: 0x00001E46
Frame header length = 17
Precision = 8
Number of Lines = 2448
Samples per Line = 3264
Image Size = 3264 x 2448
Raw Image Orientation = Landscape
Number of Img components = 3
Component[1]: ID=0x01, Samp Fac=0x22 (Subsamp 1 x 1), Quant Tbl Sel=0x00 (Lum: Y)
Component[2]: ID=0x02, Samp Fac=0x11 (Subsamp 2 x 2), Quant Tbl Sel=0x01 (Chrom: Cb)
Component[3]: ID=0x03, Samp Fac=0x11 (Subsamp 2 x 2), Quant Tbl Sel=0x01 (Chrom: Cr)
*** Marker: SOS (Start of Scan) (xFFDA) ***
OFFSET: 0x00001FFD
Scan header length = 12
Number of img components = 3
Component[1]: selector=0x01, table=0x00
Component[2]: selector=0x02, table=0x11
Component[3]: selector=0x03, table=0x11
Spectral selection = 0 .. 63
Successive approximation = 0x00
*** Decoding SCAN Data ***
OFFSET: 0x0000200B
Scan Decode Mode: Full IDCT (AC + DC)
Scan Data encountered marker 0xFFD9 @ 0x000CB2CB.0
Compression stats:
Compression Ratio: 29.09:1
Bits per pixel: 0.83:1
Huffman code histogram stats:
Huffman Table: (Dest ID: 0, Class: DC)
# codes of length 01 bits: 0 ( 0%)
# codes of length 02 bits: 18575 ( 15%)
# codes of length 03 bits: 91405 ( 73%)
# codes of length 04 bits: 6690 ( 5%)
# codes of length 05 bits: 5345 ( 4%)
# codes of length 06 bits: 2710 ( 2%)
# codes of length 07 bits: 123 ( 0%)
# codes of length 08 bits: 0 ( 0%)
# codes of length 09 bits: 0 ( 0%)
# codes of length 10 bits: 0 ( 0%)
# codes of length 11 bits: 0 ( 0%)
# codes of length 12 bits: 0 ( 0%)
# codes of length 13 bits: 0 ( 0%)
# codes of length 14 bits: 0 ( 0%)
# codes of length 15 bits: 0 ( 0%)
# codes of length 16 bits: 0 ( 0%)
Huffman Table: (Dest ID: 1, Class: DC)
# codes of length 01 bits: 0 ( 0%)
# codes of length 02 bits: 41476 ( 66%)
# codes of length 03 bits: 9744 ( 16%)
# codes of length 04 bits: 5105 ( 8%)
# codes of length 05 bits: 3621 ( 6%)
# codes of length 06 bits: 1970 ( 3%)
# codes of length 07 bits: 474 ( 1%)
# codes of length 08 bits: 34 ( 0%)
# codes of length 09 bits: 0 ( 0%)
# codes of length 10 bits: 0 ( 0%)
# codes of length 11 bits: 0 ( 0%)
# codes of length 12 bits: 0 ( 0%)
# codes of length 13 bits: 0 ( 0%)
# codes of length 14 bits: 0 ( 0%)
# codes of length 15 bits: 0 ( 0%)
# codes of length 16 bits: 0 ( 0%)
Huffman Table: (Dest ID: 0, Class: AC)
# codes of length 01 bits: 0 ( 0%)
# codes of length 02 bits: 365681 ( 44%)
# codes of length 03 bits: 60853 ( 7%)
# codes of length 04 bits: 247142 ( 30%)
# codes of length 05 bits: 77263 ( 9%)
# codes of length 06 bits: 34012 ( 4%)
# codes of length 07 bits: 28448 ( 3%)
# codes of length 08 bits: 9985 ( 1%)
# codes of length 09 bits: 5945 ( 1%)
# codes of length 10 bits: 2962 ( 0%)
# codes of length 11 bits: 1333 ( 0%)
# codes of length 12 bits: 885 ( 0%)
# codes of length 13 bits: 0 ( 0%)
# codes of length 14 bits: 0 ( 0%)
# codes of length 15 bits: 97 ( 0%)
# codes of length 16 bits: 1252 ( 0%)
Huffman Table: (Dest ID: 1, Class: AC)
# codes of length 01 bits: 0 ( 0%)
# codes of length 02 bits: 161579 ( 51%)
# codes of length 03 bits: 41566 ( 13%)
# codes of length 04 bits: 50669 ( 16%)
# codes of length 05 bits: 34863 ( 11%)
# codes of length 06 bits: 16596 ( 5%)
# codes of length 07 bits: 3241 ( 1%)
# codes of length 08 bits: 5403 ( 2%)
# codes of length 09 bits: 3115 ( 1%)
# codes of length 10 bits: 1497 ( 0%)
# codes of length 11 bits: 603 ( 0%)
# codes of length 12 bits: 120 ( 0%)
# codes of length 13 bits: 0 ( 0%)
# codes of length 14 bits: 239 ( 0%)
# codes of length 15 bits: 117 ( 0%)
# codes of length 16 bits: 245 ( 0%)
YCC clipping in DC:
Y component: [<0= 0] [>255= 0]
Cb component: [<0= 0] [>255= 0]
Cr component: [<0= 0] [>255= 0]
RGB clipping in DC:
R component: [<0= 0] [>255= 0]
G component: [<0= 0] [>255= 0]
B component: [<0= 0] [>255= 0]
Average Pixel Luminance (Y):
Y=[119] (range: 0..255)
Brightest Pixel Search:
YCC=[ 1017, -16, -277] RGB=[205,255,251] @ MCU[ 90, 38]
Finished Decoding SCAN Data
Number of RESTART markers decoded: 0
Next position in scan buffer: Offset 0x000CB2CA.2
*** Marker: EOI (End of Image) (xFFD9) ***
OFFSET: 0x000CB2CB
*** Searching Compression Signatures ***
Signature: 01387A14AF75DC6963F040C1239B7DED
Signature (Rotated): 0196457BE1E9E30F00715A3DDE8B160C
File Offset: 0 bytes
Chroma subsampling: 2x2
EXIF Make/Model: OK [Sony Ericsson] [MT15i]
EXIF Makernotes: NONE
EXIF Software: OK [4.0.1.A.0.283_2d_f200]
Modded
JpegSnoopResult:
Code:
JPEGsnoop 1.5.2 by Calvin Hass
http://www.impulseadventure.com/photo/
-------------------------------------
Filename: [C:\Dokumente und Einstellungen\games\Eigene Dateien\Dropbox\privat\telefon\modded.JPG]
Filesize: [2360386] Bytes
Start Offset: 0x00000000
*** Marker: SOI (xFFD8) ***
OFFSET: 0x00000000
*** Marker: APP1 (xFFE1) ***
OFFSET: 0x00000002
length = 7550
Identifier = [Exif]
Identifier TIFF = 0x[4D4D002A 00000008]
Endian = Motorola (big)
TAG Mark x002A = 0x002A
EXIF IFD0 @ Absolute 0x00000014
Dir Length = 0x000A
[Make ] = "Sony Ericsson"
[Model ] = "MT15i"
[Orientation ] = Row 0: top, Col 0: left
[XResolution ] = 72/1
[YResolution ] = 72/1
[ResolutionUnit ] = Inch
[Software ] = "4.0.1.A.0.283_2d_f200"
[DateTime ] = "2011:10:18 13:03:54"
[YCbCrPositioning ] = Centered
[ExifOffset ] = @ 0x00D4
Offset to Next IFD = 0x00000270
EXIF IFD1 @ Absolute 0x0000027C
Dir Length = 0x0007
[Compression ] = JPEG
[XResolution ] = 72/1
[YResolution ] = 72/1
[ResolutionUnit ] = Inch
[JpegIFOffset ] = @ +0x02DA = @ 0x02E6
[JpegIFByteCount ] = 6812
Offset to Next IFD = 0x00000000
EXIF SubIFD @ Absolute 0x000000E0
Dir Length = 0x0018
[ExposureTime ] = 10/640 s
[FNumber ] = F2.4
[ISOSpeedRatings ] = 200
[ExifVersion ] = 02.20
[DateTimeOriginal ] = "2011:10:18 13:03:54"
[DateTimeDigitized ] = "2011:10:18 13:03:54"
[ComponentsConfiguration ] = [Y Cb Cr .]
[ShutterSpeedValue ] = 600/100
[ExposureBiasValue ] = 0.00 eV
[MeteringMode ] = CenterWeightedAverage
[LightSource ] = unknown
[Flash ] = Flash did not fire
[FocalLength ] = 4 mm
[FlashPixVersion ] = 01.00
[ColorSpace ] = sRGB
[ExifImageWidth ] = 3264
[ExifImageHeight ] = 2448
[ExifInteroperabilityOffset ] = @ 0x0252
[CustomRendered ] = Normal process
[ExposureMode ] = Auto exposure
[WhiteBalance ] = Auto white balance
[DigitalZoomRatio ] = 100/100
[SceneCaptureType ] = Standard
[SubjectDistanceRange ] = 0
EXIF InteropIFD @ Absolute 0x0000025E
Dir Length = 0x0002
[InteroperabilityIndex ] = "R98"
[InteroperabilityVersion ] = 01.00
*** Marker: DQT (xFFDB) ***
Define a Quantization Table.
OFFSET: 0x00001D82
Table length = 132
----
Precision=8 bits
Destination ID=0 (Luminance)
DQT, Row #0: 1 1 1 1 1 2 3 4
DQT, Row #1: 1 1 1 1 2 3 4 3
DQT, Row #2: 1 1 1 1 2 3 4 3
DQT, Row #3: 1 1 1 2 3 5 5 4
DQT, Row #4: 1 1 2 3 4 7 6 5
DQT, Row #5: 1 2 3 4 5 6 7 6
DQT, Row #6: 3 4 5 5 6 7 7 6
DQT, Row #7: 4 6 6 6 7 6 6 6
Approx quality factor = 96.95 (scaling=6.11 variance=1.09)
----
Precision=8 bits
Destination ID=1 (Chrominance)
DQT, Row #0: 1 1 1 3 6 6 6 6
DQT, Row #1: 1 1 2 4 6 6 6 6
DQT, Row #2: 1 2 3 6 6 6 6 6
DQT, Row #3: 3 4 6 6 6 6 6 6
DQT, Row #4: 6 6 6 6 6 6 6 6
DQT, Row #5: 6 6 6 6 6 6 6 6
DQT, Row #6: 6 6 6 6 6 6 6 6
DQT, Row #7: 6 6 6 6 6 6 6 6
Approx quality factor = 96.99 (scaling=6.01 variance=0.24)
*** Marker: SOF0 (Baseline DCT) (xFFC0) ***
OFFSET: 0x00001E08
Frame header length = 17
Precision = 8
Number of Lines = 2448
Samples per Line = 3264
Image Size = 3264 x 2448
Raw Image Orientation = Landscape
Number of Img components = 3
Component[1]: ID=0x01, Samp Fac=0x22 (Subsamp 1 x 1), Quant Tbl Sel=0x00 (Lum: Y)
Component[2]: ID=0x02, Samp Fac=0x11 (Subsamp 2 x 2), Quant Tbl Sel=0x01 (Chrom: Cb)
Component[3]: ID=0x03, Samp Fac=0x11 (Subsamp 2 x 2), Quant Tbl Sel=0x01 (Chrom: Cr)
*** Marker: SOS (Start of Scan) (xFFDA) ***
OFFSET: 0x00001FBF
Scan header length = 12
Number of img components = 3
Component[1]: selector=0x01, table=0x00
Component[2]: selector=0x02, table=0x11
Component[3]: selector=0x03, table=0x11
Spectral selection = 0 .. 63
Successive approximation = 0x00
*** Decoding SCAN Data ***
OFFSET: 0x00001FCD
Scan Decode Mode: Full IDCT (AC + DC)
Scan Data encountered marker 0xFFD9 @ 0x00240440.0
Compression stats:
Compression Ratio: 10.19:1
Bits per pixel: 2.36:1
Huffman code histogram stats:
Huffman Table: (Dest ID: 0, Class: DC)
# codes of length 01 bits: 0 ( 0%)
# codes of length 02 bits: 4567 ( 4%)
# codes of length 03 bits: 87561 ( 70%)
# codes of length 04 bits: 9569 ( 8%)
# codes of length 05 bits: 8150 ( 7%)
# codes of length 06 bits: 6817 ( 5%)
# codes of length 07 bits: 5323 ( 4%)
# codes of length 08 bits: 2671 ( 2%)
# codes of length 09 bits: 190 ( 0%)
# codes of length 10 bits: 0 ( 0%)
# codes of length 11 bits: 0 ( 0%)
# codes of length 12 bits: 0 ( 0%)
# codes of length 13 bits: 0 ( 0%)
# codes of length 14 bits: 0 ( 0%)
# codes of length 15 bits: 0 ( 0%)
# codes of length 16 bits: 0 ( 0%)
Huffman Table: (Dest ID: 1, Class: DC)
# codes of length 01 bits: 0 ( 0%)
# codes of length 02 bits: 16291 ( 26%)
# codes of length 03 bits: 13190 ( 21%)
# codes of length 04 bits: 13075 ( 21%)
# codes of length 05 bits: 8920 ( 14%)
# codes of length 06 bits: 5109 ( 8%)
# codes of length 07 bits: 3357 ( 5%)
# codes of length 08 bits: 1935 ( 3%)
# codes of length 09 bits: 493 ( 1%)
# codes of length 10 bits: 54 ( 0%)
# codes of length 11 bits: 0 ( 0%)
# codes of length 12 bits: 0 ( 0%)
# codes of length 13 bits: 0 ( 0%)
# codes of length 14 bits: 0 ( 0%)
# codes of length 15 bits: 0 ( 0%)
# codes of length 16 bits: 0 ( 0%)
Huffman Table: (Dest ID: 0, Class: AC)
# codes of length 01 bits: 0 ( 0%)
# codes of length 02 bits: 1073745 ( 47%)
# codes of length 03 bits: 202328 ( 9%)
# codes of length 04 bits: 473414 ( 21%)
# codes of length 05 bits: 235823 ( 10%)
# codes of length 06 bits: 102316 ( 4%)
# codes of length 07 bits: 91894 ( 4%)
# codes of length 08 bits: 43153 ( 2%)
# codes of length 09 bits: 29245 ( 1%)
# codes of length 10 bits: 16204 ( 1%)
# codes of length 11 bits: 6722 ( 0%)
# codes of length 12 bits: 879 ( 0%)
# codes of length 13 bits: 0 ( 0%)
# codes of length 14 bits: 0 ( 0%)
# codes of length 15 bits: 82 ( 0%)
# codes of length 16 bits: 5813 ( 0%)
Huffman Table: (Dest ID: 1, Class: AC)
# codes of length 01 bits: 0 ( 0%)
# codes of length 02 bits: 335655 ( 34%)
# codes of length 03 bits: 167892 ( 17%)
# codes of length 04 bits: 200170 ( 20%)
# codes of length 05 bits: 149402 ( 15%)
# codes of length 06 bits: 63901 ( 7%)
# codes of length 07 bits: 16446 ( 2%)
# codes of length 08 bits: 21831 ( 2%)
# codes of length 09 bits: 14265 ( 1%)
# codes of length 10 bits: 4147 ( 0%)
# codes of length 11 bits: 2228 ( 0%)
# codes of length 12 bits: 271 ( 0%)
# codes of length 13 bits: 0 ( 0%)
# codes of length 14 bits: 881 ( 0%)
# codes of length 15 bits: 689 ( 0%)
# codes of length 16 bits: 744 ( 0%)
YCC clipping in DC:
Y component: [<0= 0] [>255= 0]
Cb component: [<0= 0] [>255= 0]
Cr component: [<0= 0] [>255= 0]
RGB clipping in DC:
R component: [<0= 0] [>255= 0]
G component: [<0= 0] [>255= 0]
B component: [<0= 0] [>255= 0]
Average Pixel Luminance (Y):
Y=[120] (range: 0..255)
Brightest Pixel Search:
YCC=[ 1010, 44, -290] RGB=[202,255,255] @ MCU[ 92, 37]
Finished Decoding SCAN Data
Number of RESTART markers decoded: 0
Next position in scan buffer: Offset 0x00240440.0
*** Marker: EOI (End of Image) (xFFD9) ***
OFFSET: 0x00240440
*** Searching Compression Signatures ***
Signature: 010564D93F295ADB889B91604DC82EE1
Signature (Rotated): 014302FE54745F4DBB58A0D51CDC66BD
File Offset: 0 bytes
Chroma subsampling: 2x2
EXIF Make/Model: OK [Sony Ericsson] [MT15i]
EXIF Makernotes: NONE
EXIF Software: OK [4.0.1.A.0.283_2d_f200]
For me it seems that image quality is slightly improved (less compression artifacts). But there is still some big limitation as the driver seems to use 2x2 chroma subsampling (see http://wwwimpulseadventurecom/photo/chroma-subsampling.html for technical details). I will have to write a little tool to see if the driver is capable of other formats...
Frank
Reserved...
If you like the mod i can do a 2.3.3 version and/or try a 2.3.4 to 2.3.3 backport (but i will need someone for testing as i don't want to change my rom).
Nice. I hope to be able to test it tomorrow.
Sent from my Mt15i using Opera Mobile.
not working on my Neo 2.3.4. say camera not available. I set permissions writhe.
not work on my neo 2.3.4 , i have set permissions.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
also not working
(the same as MaxMedia)
I suppose that you need to give a framework's apk and a semccameraUI apk too
Sent from my Xperiã ÑeØ using XDA app
Donate to my paypal acc. if I helped you & if u can't, atleast hit the thanx button
Hmm, thats strange.
Lets verify a few things:
- you have a Neo (not Neo V) on stock 2.3.4 GENERIC (fs WORLD-1-8_4.0.1.A.0.283), rooted
- Camera was not running (task stopped)
- you did replace /system/app/SemcCameraUI.apk
- permissions are rw-r--r--, filesize 1.881.049, owner system, group sdcard_rw
Now, regarding the error:
- Were you able to start the camera app? Is the app not found(old shortcuts will not work) or is the error coming from the app ?
You can try to run(install) the apk after it is installed. I did this accidently a few times so i am not sure if this is neccesarry to get it to work. If the app is not finding the camera(driver) is think something is not correctly initialized.
If it's still not working you might try doing the mod yourself (see blueprint).
here it does not work, too...
btw. isnt 90% or 95% enough ? what is the default ?
i dont need 4mb pics . 1,5mb instead of 0.7mb would be fine ;o)
inteks said:
here it does not work, too...
btw. isnt 90% or 95% enough ? what is the default ?
i dont need 4mb pics . 1,5mb instead of 0.7mb would be fine ;o)
Click to expand...
Click to collapse
You've got an 8 GB card free for that i suppose
Sent from my Xperiã ÑeØ using XDA app
Donate to my paypal acc. if I helped you & if u can't, atleast hit the thanx button
frank_harmann said:
Hmm, thats strange.
Lets verify a few things:
- you have a Neo (not Neo V) on stock 2.3.4 GENERIC (fs WORLD-1-8_4.0.1.A.0.283), rooted
- Camera was not running (task stopped)
- you did replace /system/app/SemcCameraUI.apk
- permissions are rw-r--r--, filesize 1.881.049, owner system, group sdcard_rw
Now, regarding the error:
- Were you able to start the camera app? Is the app not found(old shortcuts will not work) or is the error coming from the app ?
You can try to run(install) the apk after it is installed. I did this accidently a few times so i am not sure if this is neccesarry to get it to work. If the app is not finding the camera(driver) is think something is not correctly initialized.
If it's still not working you might try doing the mod yourself (see blueprint).
Click to expand...
Click to collapse
For the verification step, i did evrything-Verified
Error is- camera not available and 3rd step about reinstalling, I'll do that when I'll be free and then give feedback
Sent from my Xperiã ÑeØ using XDA app
Donate to my paypal acc. if I helped you & if u can't, atleast hit the thanx button
inteks said:
here it does not work, too...
btw. isnt 90% or 95% enough ? what is the default ?
i dont need 4mb pics . 1,5mb instead of 0.7mb would be fine ;o)
Click to expand...
Click to collapse
I totally agree, I'd say go with 90 or even 85, it reduces size a lot and it almost doesn't affect the quality, at least it is what most picture software does in the pc.
We could compare.
I don't know what settings had done Sony, I see to much noise and poor detail in my pictures, but I suspect they could be better.
frank_harmann said:
Stock
Modded
Click to expand...
Click to collapse
It's hard to notice actual visual improvements in your sample pic since even the stock settings took a really good picture. Perhaps try taking a pic of something where the stock app doesn't do as well (something further away than a mostly macro shot) and then take a modded shot and see if it's any better.
nexus2515 said:
You've got an 8 GB card free for that i suppose
Sent from my Xperiã ÑeØ using XDA app
Donate to my paypal acc. if I helped you & if u can't, atleast hit the thanx button
Click to expand...
Click to collapse
if have 32gb card in my phone but i've till now more than 1000 photos
my picturebackup at home with all pics is allready more then 20gb (only pics!!)
pls dont waste space if it doesnt improve quality ;o)
SCHUMI_4EVER said:
It's hard to notice actual visual improvements in your sample pic since even the stock settings took a really good picture. Perhaps try taking a pic of something where the stock app doesn't do as well (something further away than a mostly macro shot) and then take a modded shot and see if it's any better.
Click to expand...
Click to collapse
You mean, leave the house
Well, as i am interested to see if this really improves anything i will try to do some shots outside using stock, modded and Camera360.
Btw, if anyone has a max quality photo from Camera360, Camera Zoom FX or Vignette taken with the Neo/Arc i would like to run it through JpegSnoop in order to see if these have different chroma subsampling.
Regarding the compression i could easily make versions with different settings(or try to make it configurable, which is a bit tricky only having smali code).
Regarding the installation problem i am not sure where the error is. If anyone would be willing to do the easy blueprint steps on there own(not using the provided apk) this might enlighten me
EDIT: Please try to wipe the camera settings. This might solve the problem. (Settings->Applications->Manage Applications->All->Camera->Delete Data)
Ok, i just wrote a small test program to see what formats are supported by the driver.
Bad luck: only JPEG is supported (default compression is 85%)
This means in order to get rid of the 2x2 chroma subsampling the driver itself has to be modded (its even possible that the code is in firmware or limited by hardware jpeg compression).
So at the moment the best i can archieve at apk-level is setting the compression level up to 100%.
Btw, does anybody know which are the driver files for the cam?
wiping data does not help.
i tryed to do the mod for myself and got the same error ?!?
btw the codeline was on mine at 999 and not at 994 .....
im on 2.3.4 stock
Chaotic behaviour is difficult to reproduce
However, just hold on a bit, i am currently deeper in the rabbit hole and trying to mod the camdrive itself (atleast i already figured out places of the quantation and diffie huffman tables and that the driver can either use the dsp chip for hw-jpeg compression or fall back to sw-jpeg compression.) I will have to poke around a bit after i reanimated my phone (got a bootloop by a wrong change to the system files Well, at least i now can switch to doomkernel while in the process of fixing...)
Well, if you are playing with the driver, can't you edit night mode? Current exposure time is 1sec, which is short... It should be longer, at least 10sec...
vignette sample
frank_harmann said:
You mean, leave the house
Well, as i am interested to see if this really improves anything i will try to do some shots outside using stock, modded and Camera360.
Btw, if anyone has a max quality photo from Camera360, Camera Zoom FX or Vignette taken with the Neo/Arc i would like to run it through JpegSnoop in order to see if these have different chroma subsampling.
Regarding the compression i could easily make versions with different settings(or try to make it configurable, which is a bit tricky only having smali code).
Regarding the installation problem i am not sure where the error is. If anyone would be willing to do the easy blueprint steps on there own(not using the provided apk) this might enlighten me
EDIT: Please try to wipe the camera settings. This might solve the problem. (Settings->Applications->Manage Applications->All->Camera->Delete Data)
Click to expand...
Click to collapse
here comes the vignette sample from my neoView attachment 2011-10-22-17-34-22-154.zip

[Devs Only] ICS - 4.0.3 Build - 3.11.605.1 VERY UNSTABLE

build.prop
Code:
ro.ril.oem.ecclist=911,*911,#911
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.managed.roaming=1
ro.ril.enable.sdr=0
ro.ril.oem.show.act=0
ro.ril.enable.gea3=1
ro.ril.vzw.feature=1
ro.cdma.data_retry_config=max_retries=infinite,0,0,60000,120000,480000,900000
ro.config.svlte1x=true
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.am=android-verizon
ro.com.google.clientidbase.gmm=android-verizon
ro.com.google.clientidbase.ms=android-verizon
ro.product.model=ADR6425LVW
ro.cdma.home.operator.alpha=Verizon
gsm.sim.operator.alpha=Verizon
gsm.operator.alpha=Verizon
ro.cdma.home.operator.numeric=310012
gsm.sim.operator.numeric=310012
gsm.operator.numeric=310012
ro.config.htc.nocheckin=1
ro.ril.def.agps.mode=6
ro.HorizontalVVM=true
ro.HorizontalBUA=true
ro.telephony.ipv6_capability=true
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.rid=62
ro.cwkey=VZW__001
ro.aa.skulist=605
ro.aa.customizationid=291784
ro.aa.taskid=239422
ro.aa.mainsku=605
ro.aa.modelid=PH9810000
ro.aa.romver=3.11.605.1
ro.aa.maincid=VZW__001
ro.aa.project=VIGOR_ICS_35_S
ro.aa.cidlist=VZW__001
ro.com.google.clientidbase=android-verizon
ro.aa.rid=62
ro.cwkey=VZW__001
ro.aa.skulist=605
ro.aa.customizationid=291784
ro.aa.taskid=239422
ro.aa.mainsku=605
ro.aa.modelid=PH9810000
ro.aa.romver=3.11.605.1
ro.aa.maincid=VZW__001
ro.aa.project=VIGOR_ICS_35_S
ro.aa.cidlist=VZW__001
ro.com.google.clientidbase=android-verizon
ro.build.id=IML74K
ro.build.display.id=IML74K
ro.build.version.incremental=285193.1
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=五 2月 3 00:26:38 CST 2012
ro.build.date.utc=1328199998
ro.build.type=user
ro.build.user=
ro.build.host=ABM022
ro.build.tags=release-keys
ro.product.model=ADR6425LVW
ro.product.brand=verizon_wwe
ro.product.name=htc_vigor
ro.product.device=vigor
ro.product.board=vigor
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=xhdpi
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=vigor
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=3.11.605.1 CL285193 release-keys
ro.build.description=3.11.605.1 CL285193 release-keys
ro.build.changelist=285193
ro.build.fingerprint=verizon_wwe/htc_vigor/vigor:4.0.3/IML74K/285193.1:user/release-keys
ro.build.characteristics=default
ro.build.project=VIGOR_ICS_35_S:239422
ro.product.version=3.11.605.1
ro.build.languageremove=0
ro.build.sense.version=3.5
keyguard.no_require_sim=1
# end build properties
#
# system.prop for vigor
#
ro.sf.lcd_density=320
debug.fb.rgb565 = 0
debug.sf.hw = 1
debug.composition.type = c2d
debug.enabletr = true
debug.qctwa.preservebuf = 1
#+HTC_RIL: from QCT Fusion
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
DEVICE_PROVISIONED=1
#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
persist.data_netmgrd_mtu=1428
#
# system props for telephony modules
#
#device supports LTE
ro.config.lte=true
#device supports EHRPD
#ro.config.ehrpd=true
#device supports simultaneous 1x voice + LTE
ro.config.svlte1x=true
#Enable ADB Logging on QCRIL and QMI-PROXY
persist.radio.adb_log_on=1
#-HTC_RIL: from QCT Fusion
# For Verizon data retry configuration
ro.cdma.data_retry_config = max_retries=infinite,0,0,60000,120000,480000,900000
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# RF team request
ro.ril.enable.dtm = 0
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 3
# Default network type.
# 4 => CDMA mode preferred.
ro.telephony.default_network=8
wifi.interface=wlan0
wifi.supplicant_scan_interval=30
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
# For ICS project, default 32m/48m
dalvik.vm.heapsize=128m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapstartsize=8m
# unlock keyguard when SIM is non-inserted
keyguard.no_require_sim=1
# For the default value of agps
ro.ril.def.agps.mode = 6
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For Pyramid China NEL
ro.ril.enable.prl.recognition = 1
# For workaround for ro.baseband property. QCT use the property same as radio version to determine the architecture.
# But we hard code to svlte2a for Vigor.
ro.baseband.arch = svlte2a
# For emmc phone storage
ro.phone_storage = 0
# For ext4 file system
ro.ext4fs = 1
# For internal fat file system
ro.phone_fat = 1
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
ro.htc.appupdate.url = http://apu-chin.htc.com/check-in/rws/and-app/update
ro.htc.appupdate.url_CN = http://apu-chin.htccomm.com.cn/check-in/rws/and-app/update
ro.htc.appupdate.exmsg.url = http://apu-msg.htc.com/extra-msg/rws/and-app/msg
ro.htc.appupdate.exmsg.url_CN = http://apu-msg.htccomm.com.cn/extra-msg/rws/and-app/msg
ro.config.htc.nocheckin = 1
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4330-B1
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
service.brcm.bt.local_name =
# For quick boot mode
persist.sys.shutdown.mode = hibernate
# For opensense sdk
ro.htc.common.version = 2.0.0.0
# Following property will be reference by Settings.
ro.product.processor = 1.5 GHz dualcore
ro.product.ram = 1GB
ro.product.display_resolution = 4.3 inch 720p resolution
ro.product.main_camera = 8M
ro.product.front_camera = 2M
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 b/g/n
#Welly_Fang_01/05/2010
ro.cdma.home.operator.numeric = 310012
ro.cdma.home.operator.alpha = Verizon
ro.htc.device.slot1 = RUIM
# Properties for supporting framework features
ro.htc.framework.screencapture = true
# Set Horizontal VVM = true and HorizontalBUA = true for Incredible#C/Lexikon/Mecha/VivoW Verizon build
# Then Verizon VVM/BuA program can check this property to known if there is a Native VVM/BuA in ROM
ro.HorizontalVVM = true
ro.HorizontalBUA = true
# Set this value to force load 8k modem in release key
# vigot must enable this value to enable 9kramdump
ro.modem.load.release_key=true
# Dump native call stack when an ANR happens to com.htc.launcher.
profiler.anr_dump_native_uid = 9999
# support sdcard2
ro.sdcard2 = 1
# For emmc phone storage
ro.phone_fat = 1
# Extend key dispatching timeout
keydispatchtimeout = 15000
# For QC perf binary hooks
# src:vendor/qcom/proprietary/android-perf/release/lib/<CPU arch>/libqc-opt.so
ro.vendor.extension_library=/system/lib/libqc-opt.so
# System property for cabl
ro.qualcomm.cabl=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
drm.service.enabled=true
ro.com.google.gmsversion=4.0.3_r0
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.fluence.enable=1
htc.audio.hac.enable=1
htc.audio.beats.state=0
lpa.decode=true
lpa.use-stagefright=true
htc.audio.q6.topology=0
ro.setupwizard.enterprise_mode=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Busybox
Superuser
Sense 3.6 (Says 3.5 In build.prop But When Loaded Shows 3.6)
Sparatic Reboots When Trying To Access Applications - **VERY UNSTABLE**
I Was Unable To Get Any Screenshots Due To The Reboot Problems.
Uploaded -> 4shared
Download Link
Newest boot.img
Have you flashed the boot image from another 4.0.3 leak? The ramdisk was patched atleast in 4.0.1 to stop the reboots in the first leak.
nice another leak ....once im done ill post a stable rom for devs to use as a base
con247 said:
Have you flashed the boot image from another 4.0.3 leak? The ramdisk was patched atleast in 4.0.1 to stop the reboots in the first leak.
Click to expand...
Click to collapse
No I Have Not, I Just Got This A Day Ago And My Focus Was See What's Inside And Root It. I'll Try My Other ROM's ICS boot.img.
Thank You con.
P.S. This Is POSSIBLE...I Was Told That There Is A Leak Of ICS 4.0.4 Sense 4.0 For The Rezound That I Might Receive. No Definite Or Guarantees.
Xtreme Outcast said:
No I Have Not, I Just Got This A Day Ago And My Focus Was See What's Inside And Root It. I'll Try My Other ROM's ICS boot.img.
Thank You con.
P.S. This Is POSSIBLE...I Was Told That There Is A Leak Of ICS 4.0.4 Sense 4.0 For The Rezound That I Might Receive. No Definite Or Guarantees.
Click to expand...
Click to collapse
Thatd be awesome if there was that leak
Holy Crap I Know! I Almost Didn't Wanna Believe "Him/Her" Until I Opened This Leak Up And Saw That It's A Newer Build. So It Definitely Is Possible Maybe Not Probable.
Xtreme Outcast said:
Holy Crap I Know! I Almost Didn't Wanna Believe "Him/Her" Until I Opened This Leak Up And Saw That It's A Newer Build. So It Definitely Is Possible Maybe Not Probable.
Click to expand...
Click to collapse
So this is a newer 3.6, with a possible sense 4.0 on the way? Omg words would not describe how happy I would be if we get sense 4.0 officially!
Yes, Remember That Word Possible. If I Was A Betting Man Right Now I'm Estimating A Less Than 43% Chance Of Receiving That Leak.
Much props to all the devs here for all their work. It seems like they all are just working off of steam and coffee(or energy drinks) to gives us the best experience we can have. It's amazing.
Lol 43% how did you come up with that number
Sent from my ADR6425LVW using XDA App
con247 said:
Lol 43% how did you come up with that number
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
Simple Logic. It Just Sounded Right.
woah this is release-keys....
JoelZ9614 said:
woah this is release-keys....
Click to expand...
Click to collapse
I Saw That Earlier Too And The Market Does Work. I Downloaded TiBu To Verify Root And Busybox.
JoelZ9614 said:
woah this is release-keys....
Click to expand...
Click to collapse
I was just about to mention the same thing.
Seems early when we don't have a good solid date for release (rumor)
They killed logcats...damn you verizon
Well i know how to fix reboots same issue from the original 4.0.3 leak
Nice! Are the data arrows still shot in this leak? Any indications of blue flashes still? Thanks guys.
no data arrows i think they dont work without the right firmware...
zetsumeikuro said:
Nice! Are the data arrows still shot in this leak? Any indications of blue flashes still? Thanks guys.
Click to expand...
Click to collapse
There Is No Blue, Everything Is White. (Clock, Data Arrows, 3G) There Are 5 Signal Bars Now.
Xtreme Outcast said:
There Is No Blue, Everything Is White. (Clock, Data Arrows, 3G) There Are 5 Signal Bars Now.
Click to expand...
Click to collapse
Whoops, I didn't mean the color of the UI . I was wondering if there were anymore intermittent blue flashes?

Help a ROM making noob get this to boot

So, I've made a full sense 4.0 port from the myTouch 4G Slide to the HTC Desire HD. But it doesn't yet boot. Can you help me fix the error in this logcat?
http://pastebin.com/fnfv7Gdw
Download for you to edit the ROM is coming soon, I just need to finish uploading it
Thanks to all of you experienced devs out there
Info you may need:
Device to port to: HTC Desire HD
Board Platform: msm7x30
Board: Spade
Full build.prop
Code:
ro.ril.ecc.VODA-Africa-South=112,911,999
ro.ril.ecc.HTC-GCC=999,112,997
ro.ril.ecc.HTC-WWE=999
ro.ril.ecc.HTC-Dutch=112
ro.ril.ecc.HTC-SPA=112, 911
ro.ril.ecc.HTC-FRA=112,911
ro.ril.ecc.HTC-ITA=112,911
ro.ril.ecc.HTC-EastEurope=112
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
ro.ril.enable.amr.wb.HTC__A07=0
ro.phone.min_match.HTC__Y13=7
ro.ril.enable.amr.wb.HTC__Y13=1
ro.ril.enable.amr.wb.HTC__E11=0
ro.ril.enable.amr.wb.HTC__001=0
ro.phone.min_match.HTC__J15=7
ro.phone.min_match.HTC__016=7
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.ril.hsxpa=3
ro.ril.fast.dormancy.rule=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.managed.roaming=1
ro.ril.enable.sdr=1
ro.ril.enable.amr.wideband=1
ro.ril.disable.cpc=1
ro.com.google.clientidbase=android-htc-rev
ro.ril.vmail.23415=1571,BT
ro.ril.vmail.27203=171
ro.ril.vmail.65502=181
ro.ril.vmail.27211=171
ro.ril.vmail.65510=100
ro.ril.vmail.22299=4133,3 ITA
ro.config.htc.enableCOTA=1
ro.watch.appid=com.sdgtl.watch.enru_40_ics
com.htc.socialnetwork.facebook=7
com.htc.htctwitter=6
com.htc.android.mail=5
com.dropbox.android=4
com.htc.cloudstorage.skydrive=3
com.htc.notes=2
com.android.bluetooth=1
dev.defaultwallpaper=/system/customize/resource/scene_wallpaper_virtuous_default.jpg
ro.ril.imc.fdn=0
ro.ril.imc.dtmclass=0
ro.ril.imc.band=900,1800,1900,850
ro.ril.imc.uband="UMTS_BAND_I","UMTS_BAND_II","UMTS_BAND_V","UMTS_BAND_VIII"
ro.ril.imc.darp=1
ro.ril.imc.enhanced.fdpch=1
ro.ril.imc.fdpch=1
ro.ril.imc.edpdch.pw.interpo=1
ro.ril.imc.hspa.dtx.drx=1
ro.ril.imc.uea2=0
ro.ril.imc.uia2=0
ro.ril.edpcch.pwr.boost=1
ro.ril.hspa.mac.ehs=1
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.rid=84
ro.cwkey=HTC__001
ro.aa.skulist=401
ro.aa.customizationid=298315
ro.aa.taskid=240060
ro.aa.project=doubleshot
ro.aa.mainsku=401
ro.aa.modelid=PG86****
ro.aa.romver=0.96.401.2
ro.aa.maincid=HTC__001
ro.aa.cidlist=HTC__001,HTC__E11,HTC__203,HTC__Y13,HTC__102,HTC__405,HTC__304,HTC__032,HTC__J15,HTC__A07,HTC__016
ro.com.google.clientidbase=android-htc
ro.build.id=IML74K
ro.build.display.id=shooteru-userdebug 4.0.3 IML74K eng..20120206.060500 test-keys
ro.build.version.incremental=25970.2
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=一 2月 6 06:05:51 CST 2012
ro.build.date.utc=1328479551
ro.build.type=userdebug
ro.build.user=
ro.build.host=ABM029
ro.build.tags=test-keys
ro.product.model=HTC Desire HD
ro.product.brand=htc_europe
ro.product.name=htc_ace
ro.product.device=ace
ro.product.board=spade
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ace
ro.ril.projectname=ace
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=0.96.401.2 CL25970 test-keys
ro.build.changelist=25970
ro.build.fingerprint=htc_europe/htc_doubleshot/doubleshot:4.0.3/IML74K/250230.102:userdebug/test-keys
ro.build.characteristics=default
ro.build.project=Shooter_U:240060
ro.product.version=Pyr-O-Ice Future 1.0.0
ro.build.languageremove=0
ro.build.sense.version=4.0
keyguard.no_require_sim=1
# end build properties
# VM size
dalvik.vm.heapsize=128m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapstartsize=8m
ro.opengles.version = 131072
# Common display settings
ro.sf.lcd_density=240
debug.fb.rgb565 = 0
debug.sf.hw=1
persist.sys.ui.hw=1
debug.composition.type=dyn
debug.enabletr=true
com.qc.hardware=true
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
# Performance tweaks
windowsmgr.max_events_per_sec=60
debug.performance.tuning=1
ro.HOME_APP_ADJ=1
wifi.interface=wlan0
wifi.softap.interface=wlan0
wifi.softapconcurrent.interface=wlan0
#RIL
rild.libpath=/system/lib/libhtc_ril.so
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
ro.telephony.ril.v3=signalstrength
ro.ril.enable.garbage.filter=0
ro.telephony.default_network=0
mobiledata.interfaces=gannet0,rmnet0,rmnet1,rmnet2
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# shooteru RF team request
ro.ril.enable.dtm = 0
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 3
# For the default value of agps
ro.ril.def.agps.mode = 2
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For shooteru China NEL
ro.ril.enable.prl.recognition = 1
# For HSDPA low throughput
ro.ril.disable.power.collapse=1
# -----------------------------
# speaker volume is from 20 to 31
# this corresponds to -2dB to +8dB
# -----------------------------
audio.speaker.voice.0=20
audio.speaker.voice.1=21
audio.speaker.voice.2=24
audio.speaker.voice.3=26
audio.speaker.voice.4=28
audio.speaker.voice.5=31
# -----------------------------
# earpiece volume is from 20 to 31
# this corresponds to -2dB to +8dB
# -----------------------------
audio.earpiece.voice.0=20
audio.earpiece.voice.1=21
audio.earpiece.voice.2=24
audio.earpiece.voice.3=26
audio.earpiece.voice.4=28
audio.earpiece.voice.5=31
# -----------------------------------
# headset volume is from 9 to 14
# this corresponds to -34dB to -19dB
# ----------------------------------
audio.headset.voice.0=16
audio.headset.voice.1=19
audio.headset.voice.2=22
audio.headset.voice.3=25
audio.headset.voice.4=28
audio.headset.voice.5=31
#NFC
debug.nfc.fw_download=false
debug.nfc.se=false
#Internal Storage
ro.phone_storage=0
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
service.brcm.bt.local_name =
service.brcm.fm.rssi = 109
# Following property will be reference by Settings.
ro.product.processor = 1.2 GHz dualcore
ro.product.ram = 1GB
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 a/b/g/n
ro.product.display_resolution = 4.3 inch qHD resolution
ro.product.main_camera = 5M*2
ro.product.front_camera = 1.3M
# For ext4 filesystem
ro.ext4fs=1
# rmt_storage
ro.emmc=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0.3_r0
ro.service.dpsvr.enabled=true
dalvik.vm.lockprof.threshold=500
persist.service.adb.enable=1
video.accelerate.hw=1
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=0
htc.audio.hac.enable=1
htc.audio.beats.state=1
lpa.decode=true
lpa.use-stagefright=true
htc.audio.q6.topology=0
ro.vold.umsdirtyratio=20
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
tf.enable=y
# Virtuous Dev Team
# pyroice tbalden
forgive my ignorance but is it trying to boot a dual core with a 1.3mp FFC, or are those settings inconsequential
# Following property will be reference by Settings.
ro.product.processor = 1.2 GHz dualcore
ro.product.ram = 1GB
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 a/b/g/n
ro.product.display_resolution = 4.3 inch qHD resolution
ro.product.main_camera = 5M*2
ro.product.front_camera = 1.3M
Click to expand...
Click to collapse
Madaz2 said:
forgive my ignorance but is it trying to boot a dual core with a 1.3mp FFC, or are those settings inconsequential
Click to expand...
Click to collapse
They're not required on boot, they're referenced by settings later only
Sent from my HTC Desire HD using XDA
Here's a copy of the Rom for you to look at:
http://ubuntuone.com/4YaiWrXYYbIhutvhqfPOIb
Note: /system/app is installed to /data/app_s on boot, and then symlinked, as the dhd doesn't have a big enough system partition
Sent from my HTC Desire HD using XDA

freaking build prop

Ok so initially i only changed the product builds for this..just trying to get the sims freeplay but then after a few reboots i ended up editing more and more just to see it the model number would change so i could download it from ea's servers..im thinking what i changed the market says i have samsung so then sims freeplay showed up..but then when i load the game and it says i have to download ea's servers still see the original model name and are blocking me from downloading the game....ugghhhhhh i need help..problem is i have seen someone change theirs to the desire hd and the model number and all changed also..maybe i am doing something wrong (and i chose to go with samsung settings after getting mad enough lol just tried anything to see if it'd work)
**build prop***
ro.ril.oem.ecclist=911,*911,#911
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.managed.roaming=1
ro.ril.enable.sdr=0
ro.ril.oem.show.act=0
ro.ril.enable.gea3=1
ro.ril.vzw.feature=1
ro.cdma.data_retry_config=max_retries=infinite,0,0,60000,120000,480000,900000
ro.config.svlte1x=true
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.am=android-verizon
ro.com.google.clientidbase.gmm=android-verizon
ro.com.google.clientidbase.ms=android-verizon
ro.product.model=GT-I9300
ro.cdma.home.operator.alpha=Verizon
gsm.sim.operator.alpha=Verizon
gsm.operator.alpha=Verizon
ro.cdma.home.operator.numeric=310012
gsm.sim.operator.numeric=310012
gsm.operator.numeric=310012
ro.config.htc.nocheckin=1
ro.watch.appid=com.sdgtl.watch.evaul_40_ics
dev.defaultwallpaper=/system/customize/resource/matte.jpg
dev.deviceimage_large=/system/customize/resource/evita-att_187x370.png
dev.deviceimage_small=/system/customize/resource/evita-att32x58.png
ro.ril.def.agps.mode=6
ro.HorizontalVVM=true
ro.HorizontalBUA=true
ro.da1.enable=true
ro.telephony.ipv6_capability=1
android.telephony.apn-restore=1800000
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.rid=137
ro.cwkey=VZW__001
ro.aa.skulist=605
ro.aa.customizationid=317266
ro.aa.taskid=249167
ro.aa.mainsku=605
ro.aa.modelid=PH9810000
ro.aa.romver=1.68.502.1
ro.aa.maincid=VZW__001
ro.aa.project=VIGOR_ICS_40_S
ro.aa.cidlist=VZW__001
ro.com.google.clientidbase=android-verizon
ro.aa.rid=137
ro.cwkey=VZW__001
ro.aa.skulist=605
ro.aa.customizationid=317266
ro.aa.taskid=249167
ro.aa.mainsku=605
ro.aa.modelid=PH9810000
ro.aa.romver=3.11.605.22
ro.aa.maincid=VZW__001
ro.aa.project=Evita_UL
ro.aa.cidlist=VZW__001
ro.com.google.clientidbase=android-verizon
ro.build.id=IMM76D
ro.build.display.id=IMM76D
ro.build.version.incremental=339740.22
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=一 3月 12 00:06:28 CST 2012
ro.build.date.utc=1331481988
ro.build.type=user
ro.build.user=
ro.build.host=ABM020
ro.build.tags=release-keys
ro.product.model=GT-I9300
ro.product.brand=samsung
ro.product.name=yakju
ro.product.device=maguro
ro.product.board=tuna
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=maguro
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.77.708.2 CL57351 release-keys
ro.build.description=1.68.502.1 CL52578 release-keys
ro.build.changelist=339740
ro.build.fingerprint=google/yakju/maguro:4.0.4/IMM76D/339740.22:user/release-keys
ro.build.characteristics=default
ro.build.project=Evita_UL:249105
ro.product.version=RezROM S4 v2.5
ro.build.languageremove=0
ro.build.sense.version=4.0
ro.secure=0
ro.allow.mock.location=0
ro.debuggable=1
persist.service.adb.enable=1
keyguard.no_require_sim=1
# end build properties
#
# system.prop for vigor
#
persist.sys.ui.hw=1
ro.sf.lcd_density=320
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
ro.sf.compbypass.enable=0
video.accelerate.hw=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
windowsmgr.max_events_per_sec=240
ro.HOME_APP_ADJ=1
qemu.hw.mainkeys=1
#+HTC_RIL: from QCT Fusion
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.rild.ril.bva=0
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
persist.rild.ril.adminAPN=vzwadmin
DEVICE_PROVISIONED=1
#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
ro.hdmi.enable=true
lpa.decode=true
lpa.tunnel=true
lpa.use-stagefright=true
htc.audio.lpa.a2dp=0
htc.audio.global.state=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.enable_dmic=1
#export for SoundHound
persist.htc.audio.pcm.samplerate=44100
persist.htc.audio.pcm.channels=2
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
persist.data_netmgrd_mtu=1428
#
# system props for telephony modules
#
#device supports LTE
ro.config.lte=true
#device supports EHRPD
#ro.config.ehrpd=true
#device supports simultaneous 1x voice + LTE
ro.config.svlte1x=true
#Enable ADB Logging on QCRIL and QMI-PROXY
persist.radio.adb_log_on=1
#-HTC_RIL: from QCT Fusion
# For Verizon data retry configuration
ro.cdma.data_retry_config = max_retries=infinite,0,0,60000,120000,480000,900000
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# RF team request
ro.ril.enable.dtm = 0
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 3
# Default network type.
# 4 => CDMA mode preferred.
ro.telephony.default_network=8
wifi.interface=wlan0
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
# For ICS project, default 32m/48m
dalvik.vm.heapsize=128m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapstartsize=8m
# unlock keyguard when SIM is non-inserted
keyguard.no_require_sim=1
# For the default value of agps
ro.ril.def.agps.mode = 6
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For Pyramid China NEL
ro.ril.enable.prl.recognition = 1
# For workaround for ro.baseband property. QCT use the property same as radio version to determine the architecture.
# But we hard code to svlte2a for Vigor.
ro.baseband.arch = svlte2a
# For emmc phone storage
ro.phone_storage = 0
# For ext4 file system
ro.ext4fs = 1
# For internal fat file system
ro.phone_fat = 1
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
ro.htc.appupdate.url = http://apu-chin.htc.com/check-in/rws/and-app/update
ro.htc.appupdate.url_CN = http://apu-chin.htccomm.com.cn/check-in/rws/and-app/update
ro.htc.appupdate.exmsg.url = http://apu-msg.htc.com/extra-msg/rws/and-app/msg
ro.htc.appupdate.exmsg.url_CN = http://apu-msg.htccomm.com.cn/extra-msg/rws/and-app/msg
# Disable HTC checkin service
ro.config.htc.nocheckin = 1
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.kernel.android.checkjni=0
dalvik.vm.checkjni=0
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4330-B1
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
service.brcm.bt.local_name =
# For quick boot mode
persist.sys.shutdown.mode = hibernate
# For opensense sdk
ro.htc.common.version = 2.0.0.0
# Following property will be reference by Settings.
ro.product.processor = 1.5 GHz dualcore
ro.product.ram = 1GB
ro.product.display_resolution = 4.3 inch 720p resolution
# Camera H/W information
ro.product.main_camera = 8M
ro.product.front_camera = 2M
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 b/g/n
#Welly_Fang_01/05/2010
ro.cdma.home.operator.numeric = 310012
ro.cdma.home.operator.alpha = Verizon
ro.htc.device.slot1 = RUIM
# Properties for supporting framework features
ro.htc.framework.screencapture = true
# jerry.pj_chen [Start]20100730 For Verizon data retry
ro.cdma.data_retry_config = max_retries=infinite,0,0,60000,120000,480000,900000
ro.com.android.dataroaming = true
# jerry.pj_chen [end]20100730 For Verizon data retry
# Set Horizontal VVM = true and HorizontalBUA = true for Incredible#C/Lexikon/Mecha/VivoW Verizon build
# Then Verizon VVM/BuA program can check this property to known if there is a Native VVM/BuA in ROM
ro.HorizontalVVM = true
ro.HorizontalBUA = true
# Set this value to force load 8k modem in release key
# vigot must enable this value to enable 9kramdump
ro.modem.load.release_key=true
# Dump native call stack when an ANR happens to com.htc.launcher.
profiler.anr_dump_native_uid = 9999
# support sdcard2
ro.sdcard2 = 1
# For emmc phone storage
ro.phone_fat = 1
# Extend key dispatching timeout
keydispatchtimeout = 15000
# System property for cabl
ro.qualcomm.cabl=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
ro.da1.enable=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0.3_r0
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.com.google.clientidbase=android-qualcomm
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
htc.audio.alc.enable=1
htc.audio.enable_dmic=0
ro.service.dpsvr.enabled=true
ro.telephony.call_ring.delay=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
#Bravia Engine Service
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
Now you know you're in the wrong section buddy lol
Sent from my ADR6425LVW using xda premium
Double post
Sent from my ADR6425LVW using Tapatalk 2
how do i move or delete the thread?

[QUESTION] How to swap external to internal on GT-S7562?

Hi guys, I have got Galaxy S Duos (GT-S7562). I rooted it. Then, i downloaded Link2SD but it didn't work. After that i tried use external 2 internal app.But my phone hasn't got free space. Then i downloaded root explorer,opened vold.fstab. It is here. What should i do?
Copyright (c) 2011, Code Aurora Forum. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of Code Aurora Forum, Inc. nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
[
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
#storage_struct = series, "/mnt/sdcard/extStorages"
#storage_struct = parallel
{
supported_exfat = yes
}
dev_mount sdcard /mnt/extSdCard auto /devices/platform/msm_sdcc.1/mmc_host/mmc1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sda /mnt/UsbDriveA auto /devices/platform/msm_hsusb_host/usb
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdb /mnt/UsbDriveB auto /devices/platform/msm_hsusb_host/usb
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdc /mnt/UsbDriveC auto /devices/platform/msm_hsusb_host/usb
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdd /mnt/UsbDriveD auto /devices/platform/msm_hsusb_host/usb
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sde /mnt/UsbDriveE auto /devices/platform/msm_hsusb_host/usb
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdf /mnt/UsbDriveF auto /devices/platform/msm_hsusb_host/usb
#EOF
And if i change this can i download apps to SDCard?

Categories

Resources