Related
I have the Evo LTE S-on (HTC bootloader unlocked) and TWRP installed. The only problem I'm having is that I cannot seem to get .zip files to open from the install menu in TWRP (recovery). I factory reset and try to open the zip from the install menu but it just says "Failed". Specifically I am trying Kushdeck's new CM10 ROM. Any help would be greatly appreciated. Thanks.
PS. Not sure if this will help but on the install menu my files show up twice, the first time with the normal naming and the second with "/." in front of them.
Did u try and re download it again? Sounds like a bad DL if it keeps failing after a couple of attempts
Sent from my EVO using Tapatalk 2
Ok I'm trying that now. I'm also wondering if there's a problems with my /ext-sd because everytime I factory reset it says it couldn't access that. Do you think that has anything to do with it? Is reinstalling TWRP an option?
Ok thanks so much the re-download did it. But now I'm at a black/blank screen after start up. I factory reset, installed the CM10 ROM then Gapps and wiped the dalvik/cache. Then when I reboot it just goes to the HTC screen and after that nothing. Ideas?
This is going to sound strange but try factory restet, wipe cache/dalvik and then just reboot without trying to flash anything.. I've been having some similar issues as mine isn't recoglizing any MD5 when i try to flash a new rom.. I wiped my phone and have tried to flash a few roms and it fails every time and in wiping my phone it somehow took out my backup so without any other options (that I knew of) I just rebooted and luckily it loaded a completely bare vipor rom like what I started out with when I originally rooted.. BTW, did you create a backup before trying to flash? Should always make a backup....
Ya I had backed up. Turns out I needed to manually flash the boot.img which fixed the issue
elitelimfish said:
Ya I had backed up. Turns out I needed to manually flash the boot.img which fixed the issue
Click to expand...
Click to collapse
Thanks for this. I had the same problem, (S-ON, TWRP. black screen on boot). I was able to flash stock-based ROMs, but not CM10, so I suspected it had something to do with the things that HTCDev won't allow the recovery access to, but the logs from TWRP didn't throw any errors, so while I suspected boot, I didn't know what to do about it. And everyone knows that it's easy to be caviler with everything is working, but as soon as you start having problems, you get gun shy about trying things.
Your post was the solution for me. Extract the boot.img file found inside the zip or your chosen ROM, and flash it using fastboot:
"fastboot flash boot boot.img"
heywetried said:
Thanks for this. I had the same problem, (S-ON, TWRP. black screen on boot). I was able to flash stock-based ROMs, but not CM10, so I suspected it had something to do with the things that HTCDev won't allow the recovery access to, but the logs from TWRP didn't throw any errors, so while I suspected boot, I didn't know what to do about it. And everyone knows that it's easy to be caviler with everything is working, but as soon as you start having problems, you get gun shy about trying things.
Your post was the solution for me. Extract the boot.img file found inside the zip or your chosen ROM, and flash it using fastboot:
"fastboot flash boot boot.img"
Click to expand...
Click to collapse
Hey out of curiosity did you like any of the stock based ROMs? If so which ones? I kinda wanna try one out but haven't settle on one
I created this thread because I have looked all over and have been unable to find someone with the exact same issue(s).
I said "sort of" in the title because twrp is working. Ok, so before everyone asks if I have nvflash, the answer is no. I did not have the right version of firmware, and did not try to install it originally. Since I was able to install roms, I figured I was fine...oops.
Twrp is not properly installing roms. More on that later. I am getting to the asus splash screen that says my device is unlocked, but it is stuck there.
My last working rom was the deodexed stock JB rom from craig gomez. I installed it with goo and when I installed that, I lost custom recovery and root, so I decided to go back to a more custom rom so Titanium backup would work. When I did that, I tried also tried again to make nvflash work. I got through the first step, it said it was successful, except I never got the little message in the upper left corner that I was supposed to get. I did not think it was a big deal because my prime would still boot like normal.
Then I installed twrp 2.3.1.0 and I have tried flashing previous restore images. I have tried installing the roms on my sdcard. I cannot get past the asus splash screen.
If I try installing a rom with the force md5 check enabled, it does detect an md5 and then quits.
If I try intalling a rom without the force md5 check, i get an error that says E:Unable to mount '/staging'
When I try installing a backup everything seems to work okay, but then I get the same error E:Unable to mount '/staging'
When I try to install roms through fastboot, I get the following errors:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
When I try using adb, I do not see any devices.
I tried putting CWM on the prime to see if I could install from that instead, but it would not load after install.
I tried putting an older version of twrp on the prime, to see if that was the issue because I used to have an older version...I could not get that to load either...so I went back to this version.
Any ideas or suggestions would be awesome guys. I am stuck.
I even went to install the naked drivers again, and when I try to flash a different recovery, I get the <waiting for device> text that never goes away.
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
godlyitem said:
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
Click to expand...
Click to collapse
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
big time noob said:
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
Click to expand...
Click to collapse
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
godlyitem said:
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
Click to expand...
Click to collapse
Yeah, I thought that too, but fastboot does not work properly either...argh. I wish one of the gurus would chime in here.
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
Click to expand...
Click to collapse
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
godlyitem said:
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
That doesn't really help us. If possible, can you edit/delete your message so that the guys that might help do actually help? Don't want them to think this is done.
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
Click to expand...
Click to collapse
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
godlyitem said:
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
Click to expand...
Click to collapse
big time noob said:
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
Click to expand...
Click to collapse
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Thanks. That is what I needed to know.
I will see if I can make this work when I get back from work.
godlyitem said:
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Click to expand...
Click to collapse
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
Download the zip:
http://goo.gl/hiFHB
Goto to Twrp recovery and install the zip..Since it supports microsd u can transfer the zip to microsd.
Goto TWRP -> INSTALL -> CHOOSE EXTERNAL SD -> INSTALL THE ZIP
It will completely wipe the internal storage and then download the official STOCK JB FROM ASUS SITE and follow the same steps to install. Now install the latest twrp recovery using fastboot
big time noob said:
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
Click to expand...
Click to collapse
When I was doing the fullwipe the same errors happened to me.. But dont mind..I got errors like
1. No md5 file found
2. Mount error
3. Cannot find /staging
Just follow the above the steps ull get it right
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Yeah, I should have said I tried that first. I also tried the stock rom from asus. When that didn't work, I tried the stock rom deodexed I found in goo.
There are a bunch of permission errors going on inside my prime. When I go into the mount area, it will not let me mount the data to move it. Or, when I try to copy it over I get a failed message.
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Fixed?
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
big time noob said:
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
Click to expand...
Click to collapse
big time noob said:
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
Click to expand...
Click to collapse
You will have the jelly bean bootloader now so as long as you stick to it you should be fine. The only other thing I would suggest is check you version of twrp, you should be running the jelly bean version of it also. And if I am not mistaken, you need to be on ics to use nvflash (although I haven't checked the op recently so I could be wrong) so definitely stay away from that unless you downgrade.
So my tablet won't get past the Asus start up screen, but I did manage to get CWM working, problem is that I have no roms on my internal SD, because I wiped everything trying to fix stuff with WSG Flasher (didn't work).
I've tried everything, but I'm at a total loss here. adb won't work, even after I installed that dreadful Asus PC Suite, WSG FLasher doesn't work because adb doesn't work and
Code:
fastboot -i 0x0b05 flash somerom.zip
doesn't work either.
I've tried installing dozens of roms and CWM versions through fastboot, but none worked. The only CWM image that did work was called "recover-jb.img" that I got from here, though it's kind of useless if I can't install any roms.
Any suggestions, or should I just throw my tablet out?
Pepe1Vo said:
So my tablet won't get past the Asus start up screen, but I did manage to get CWM working, problem is that I have no roms on my internal SD, because I wiped everything trying to fix stuff with WSG Flasher (didn't work).
I've tried everything, but I'm at a total loss here. adb won't work, even after I installed that dreadful Asus PC Suite, WSG FLasher doesn't work because adb doesn't work and
Code:
fastboot -i 0x0b05 flash somerom.zip
doesn't work either.
I've tried installing dozens of roms and CWM versions through fastboot, but none worked. The only CWM image that did work was called "recover-jb.img" that I got from here, though it's kind of useless if I can't install any roms.
Any suggestions, or should I just throw my tablet out?
Click to expand...
Click to collapse
what were you doing when you started having trouble? are you on jb or ics bootloader where is the nvida on your splash screen?
whycali said:
what were you doing when you started having trouble? are you on jb or ics bootloader where is the nvida on your splash screen?
Click to expand...
Click to collapse
I was trying to install CM10, initially installing any CM rom would fail because CWM would say "assert failed, model is not tf201" (It is most certainly a transformer prime, I checked double checked) I edited the updater-script file in the .zip to skip the model check, after that installing the rom went just fine, it would just hang indefinitely on the splash screen.
The tablet is on the jb bootloader, the nvidia logo is in the bottom right corner.
Pepe1Vo said:
I was trying to install CM10, initially installing any CM rom would fail because CWM would say "assert failed, model is not tf201" (It is most certainly a transformer prime, I checked double checked) I edited the updater-script file in the .zip to skip the model check, after that installing the rom went just fine, it would just hang indefinitely on the splash screen.
The tablet is on the jb bootloader, the nvidia logo is in the bottom right corner.
Click to expand...
Click to collapse
let me get this straight. you can figure out how to change the updater.script but you insist on using cwm? Fastboot twrp to your prime and install a rom zip from your microsd.
whycali said:
let me get this straight. you can figure out how to change the updater.script but you insist on using cwm? Fastboot twrp to your prime and install a rom zip from your microsd.
Click to expand...
Click to collapse
Err, I didn't even know there was an alternative to cwm... At any rate, will twrp allow me to transfer files? My microsd is empty due a hardwipe I did.
Yes. TWRP Allows you to also flash zips from micro sd . Altrough I'm not sure can you install it from the situation you're in.
Sent from my GT-I9100 using xda app-developers app
Pepe1Vo said:
Err, I didn't even know there was an alternative to cwm... At any rate, will twrp allow me to transfer files? My microsd is empty due a hardwipe I did.
Click to expand...
Click to collapse
first you need the drivers for fastboot installed to your pc. you can accomplish this by following the advice given here.
http://forum.xda-developers.com/showpost.php?p=34477256&postcount=5703
Next you need a working twrp which will help you install a rom from your external microsd card. get that here. and follow his install istructions.
http://forum.xda-developers.com/showpost.php?p=34359560&postcount=5497
then I recommend grabbing this rom to install from your microsd using twrp.
AndroWook Prime Hairy Bean v1.4
www.gamerzxtreme.com/AndroWook_Hairy_Bean_v1.4_FINAL_1.zip
you should only need to follow these instructions from there.
Download AndroWook Prime Hairy Bean v1.4 from one of the links above and copy to either root of internal SD or micro SD.
Boot into recovery (TWRP) and wipe cache, dalvik cache and factory reset. You can wipe system as well if you want a total deep clean but do so at your own risk.
Select to install ROM from SD and follow on screen prompts.
When install completed allow 30-60 mins for the system to cache itself upon which time you should now have a nice smooth TP.
Enjoy!
Just got back into ROMs again, but made a few mistakes.
I was attempting to install Cyanogenmod
Got the Boot.img file to work, however I realized I didn't add the files to install the ROM, into the SD folder.
(Went into the "install" option on TWRP, but there are no files to install at all)
Now my phone just boots up to the splash logo, and stays there. Any way to fix it?
Note: Already tried RUU, I get the version error like everyone else. I don't know what else to do.
akim33 said:
Just got back into ROMs again, but made a few mistakes.
I was attempting to install Cyanogenmod
Got the Boot.img file to work, however I realized I didn't add the files to install the ROM, into the SD folder.
(Went into the "install" option on TWRP, but there are no files to install at all)
Now my phone just boots up to the splash logo, and stays there. Any way to fix it?
Note: Already tried RUU, I get the version error like everyone else. I don't know what else to do.
Click to expand...
Click to collapse
Create a folder "0" on the sd card and put the file in there. You can also side load in recovery it just takes forever to transfer the ROM.
TheRealDeadApe said:
Create a folder "0" on the sd card and put the file in there. You can also side load in recovery it just takes forever to transfer the ROM.
Click to expand...
Click to collapse
Thank you for the side load recovery. That managed to work, however I encountered another problem.
I am now stuck on the cyanogen 10.1.3 screen, same deal as before.
I've tried everything to solve this:
Deleted cache, factory reset
Made sure I had correct kernal
Etc.
Please, really need to use my phone. Thank you for the help.
Extract the kernel (boot.img) from the ROM file and flash it from your pc using fastboot. Rom doesn't boot is typically due to wrong kernel, maybe it failed to flash from recovery. You are s-off, correct?
After I attempted to install the CM 11 preview that just came out it seems as though I get stuck in a boot loop. I am able to get into the bootloader but not the recovery. The reason I think I am stuck in the boot loop is because I did not know you had to flash the boot.img that was inside the .zip file, and went ahead and flashed the .zip in my current recovery. I am just wondering if I could still fastboot flash the boot.img file without causing even more problems.
Yes, in the forum the ROM was posted (http://forum.xda-developers.com/xperia-z2-tablet/orig-development/z2-tabletdevelopment-cm11-android-4-4-t2809793) but I guess I didn't see that he said it was in the zip :silly:.
Nonetheless, I just don't want to hard brick the device so that is why I am asking. Thanks in advance for anyone that can help!
cmd-line34 said:
After I attempted to install the CM 11 preview that just came out it seems as though I get stuck in a boot loop. I am able to get into the bootloader but not the recovery. The reason I think I am stuck in the boot loop is because I did not know you had to flash the boot.img that was inside the .zip file, and went ahead and flashed the .zip in my current recovery. I am just wondering if I could still fastboot flash the boot.img file without causing even more problems.
Yes, in the forum the ROM was posted (http://forum.xda-developers.com/xperia-z2-tablet/orig-development/z2-tabletdevelopment-cm11-android-4-4-t2809793) but I guess I didn't see that he said it was in the zip :silly:.
Nonetheless, I just don't want to hard brick the device so that is why I am asking. Thanks in advance for anyone that can help!
Click to expand...
Click to collapse
Just to clarify first, do you have a 4G tablet or wifi version? And which one did you flash (castor or castor_windy)
kbroh said:
Just to clarify first, do you have a 4G tablet or wifi version? And which one did you flash (castor or castor_windy)
Click to expand...
Click to collapse
Opps, meant to mention that. I have the castor_windy version (Wi-Fi) model and flashed the castor_windy zip. I also meant to mention that I have an unlocked bootloader with the CWM based recovery (found here: http://forum.xda-developers.com/showthread.php?t=2708194). I don't think this is as important but I do have the 16GB storage. I earlier said I could not get into that recovery that I have installed, but the violet light still goes on when I boot, but nothing else.
cmd-line34 said:
Opps, meant to mention that. I have the castor_windy version (Wi-Fi) model and flashed the castor_windy zip. I also meant to mention that I have an unlocked bootloader with the CWM based recovery (found here: http://forum.xda-developers.com/showthread.php?t=2708194). I don't think this is as important but I do have the 16GB storage. I earlier said I could not get into that recovery that I have installed, but the violet light still goes on when I boot, but nothing else.
Click to expand...
Click to collapse
Ok no problem, Have you tried flashing CWM through fastboot, then reinstalling ROM through CWM?
If that can't be done, Can you flash this castor_windy version https://mega.co.nz/#!mJ5VTATR!Rb9pX0a4drAkVX53Mjf6_vZr8FqX0UzXcf1nSTzj_Fk
through fastboot, then immediately flash CWM to secure a recovery.
The link is the castor_windy ROM without having to flash a boot.img separately. Thats your safest solution instead of flashing boot.img
Thank you, just re-flashing the recovery from the thread I linked seemed to do the trick. Maybe I will try and flash Cyanogenmod later now that I got the stock ROM working again. At least I was smart enough to make a nandroid backup in CWM before hand though!
Again, thanks alot!
cmd-line34 said:
Thank you, just re-flashing the recovery from the thread I linked seemed to do the trick. Maybe I will try and flash Cyanogenmod later now that I got the stock ROM working again. At least I was smart enough to make a nandroid backup in CWM before hand though!
Again, thanks alot!
Click to expand...
Click to collapse
Good to hear!
Sent from my Xperia Z2 Tablet Wifi using XDA Premium 4 mobile app
Hi all,
bad day for me... It seems that I bricked my Z2 Tablet tonight.
At the beginning, I just wanted to install CM11.
My Z2 is a SGP512 Wifi only. So, regarding the page http://www.xperiablog.net/2014/07/12/cyanogenmod-11-nightly-builds-start-for-xperia-z2-tablet/ , it says : "There are currently nightly builds for the Wi-Fi variants (SGP511, SGP512) of the Xperia Z2 Tablet under codename “Castor Windy”" .
So I downloaded Castor Windy and put it in the tablet.
After that, I did had to install a recovery. I succeeded to install XZDualRecovery (http://forum.xda-developers.com/showthread.php?t=2794175). Once installled, I went into TWRP Recovery , started to wipe all. And next step, I began to install zip Castor Windy. At this time, TWRP tells me that Castor Windy is not for my tablet model. And I have to use Castor. Problem. I wiped all. So, I have to mount the Tablet systems and drives to put the new Castor zip downloaded. But I'm unable to mount. Nothing is mounted. I tried to use adb to connect while I was in TWRP but nothing worked. I wanted to use adb to send on one of partitions the new downloaded rom. I was unable to do that.
Finally, I shut down my tablet. I took the SD Card to put it into my PC and to put on it the downloaded Rom. And when I wanted to restart the Tablet, only the Sony Logo appears and I'm not anymore able to enter in recovery mode. ADB and Fastboot fail to detect my tablet.
I'm totally lost, and I fear that all is lost.
Please, help me, I just would like to enter recovery and flash Castor Rom.... :crying:
Thanks a lot by advance.
Tom.
See this thread: http://forum.xda-developers.com/xpe...ed-tablet-tried-to-install-cm-failed-t2838765
Good luck :good: