Related
The README File. Important Read:
Code:
################################################################################
# #
# x10 After-Root Optimiser #
# by ttxdragon #
# README FIRST! #
# #
################################################################################
Index:
1. WARNINGS!!
2. Configuration
-> Important Info
a. JITv002
b. Density Changer
3. How-To Use This.
4. Credits
1. WARNINGS!!
a. I'm not reponsible for any damage to your device. You should always be
able to just re-flash your device, but who knows wth can go wrong.
This is provided as is without any guarantees.
b. DO NOT EDIT THE DEFAULT CONFIGURATION FILES MANUALLY UNLESS YOU KNOW
WHAT YOU'RE DOING! Everything that the config files contain is easily
edited by using the default-configuration as base in the task-editor.
2. Configuration
Follow the steps on screen in the task. It'll ask you a lot of stuff, but
don't worry, it should be extremely clear what you are selecting on.
Important info:
JITv002:
Users of x10a firmware have reported issues with JIT more often than
those using x10i. x10 SO-01B firmware doesn't work with JIT at all.
Furthermore, JIT is only useful to be enabled on SE Roms. Custom ROMs
will have JIT already enabled.
Density Changer:
The default configuration changes the Density to 200, down from 240.
It basically makes everything smaller on screen. Some applications
might not work properly with the new size (because the developers
thought it'd be a great idea to not code the program flexibly
enough to scale nicely)
You can always just set it back to 240 if you decide that's better
for you.
3. How-To: Use This
Requirements: a. Windows or Linux PC,
Ubuntu Linux 10.10 Recommended
@MAC Folks: Don't have one, can't test. feel free to
submit patches/make own version
Usage: 1. Enable USB Debuggin in
Settings -> Applications -> Development
2. Plug in USB Cable
3. On Windows: Run RunMeWindows.bat
On Linux : Run RunMeLinux.sh
4. Follow On-screen instructions.
4. Credits
x10dev-team for tirelessly working to free our x10's
z4mod team for z4root
Cygwin team for developing this GPL'd port of unix utilities to Windows.
( For License and Source-code of Cygwin visit http://www.cygwin.com/ )
CHANGELOG:
Code:
v0.99.1 [2010-11-18]
- Fix JIT installation/un-installation bug
- Fix Config Selection bug
- Add "Install extra System Applications" Option
- Add "AppWidgetPicker 1.2.1" to extra system apps
- Add "Wallpaper Set and Save" to replacement apps
v0.99 [2010-11-17]
- Almost complete Rewrite
- Better output
- Add Root-method
- Allow for custom configurations
- Allow for multiple configurations
- More flexible for easy feature-addons
- Configuration now inside program.
v0.2 [2010-11-10]
- Fix "Space in Path" Bug
- Fix "OS Detection" Bug
- Add "cancel" option before running script on phone
- Move backup folder from /sdcard/post-root/backup to /sdcard/prbackup
- Always push fresh configuration to phone (deletes old config on phone)
- Updated AlarmClock Plus to LCD Density friendly version
v0.1 [2010-11-09]
- Fix Busybox installation
- Add LCD Density Changing Option
v0.0 [2010-11-09]
- Initial Release
To-do List:
- Make Cygwin a Windows-Only Download happening at runtime
- Make useful for Custom Roms -- if possible/wanted.
Download Links:
v0.99.1
Multiupload || DepositFiles
(Please use Multiupload where possible, so that I can have some stats )
Extra Information on what system programs can be removed/replaced from a SE ROM
ttxdragon said:
Directly Replaced by Other apps
Alarm Clock -> Alarm Clock Plus v2
apk: AlarmClock
Browser -> Dolphin HD
apk: SemcBrowser
Drawbacks:
Some Applications are hardcoded to use the browser and won't work without it.
Example: DoCoMo Market
Calculator -> RealCalc
apk: Calculator
Email, Gmail -> K-9Mail
apk: Gmail GmailProvider SemcEmailLargeui
Drawbacks:
Gmail: Some applications don't support K-9Mail for pulling email-info
Examples are Executive Assistant, Pure Messenger Widget
Email: In the Phonebook Email Tab "Write New" doesn't work anymore.
Workaround -> Clicking mail-address in main-view works.
SE Launcher -> ADWLauncher
apk: SemcHomeL
Bloatware
Nordic Apps (Only in Generic Nordic ROM)
/system/etc/customization/applications/Supernytt.apk
/system/app/Telenor_Wrapper.apk
/data/app/com.apegroup.aftonbladet.supernytt.zip
/data/app-private/com.apegroup.aftonbladet.supernytt.apk
Backup And Restore
apk: backupandrestore
Documentation
apk: EManualLauncher EManual usersupport
Creatouch (SE)
apk: creatouch
DebugHelper (Service)
apk: CrashSMS
Digital Clock (Widget)
apk: DigitalClockWidget
Facebook (Client)
apk: facebook
Face Recognition (Service for Camera)
apk: FaceRecognition
Drawbacks:
Face Recognition doesn't work anymore
Learning Client (Service)
apk: LearningClient
Drawbacks:
Word-Learning for the default keyboards is removed.
Live Wallpapers (Wallpapers only)
apk: LiveWallpapers MagicSmokeWallpapers VisualizationWallpapers
Drawbacks:
Only Google Maps Live-wallpaper left
but market live-wallpapers still work
MediaScape
apk: mediascape MediaScapePluginManager
Drawbacks:
Camera App is hard-coded to use Mediascape for Gallery/Share.
Vignette Does well but doesn't help in Video mode.
Means: No easy sharing/viewing for taken videos
No easy way to create a wallpaper from taken pictures.
No way to set contact picture from phonebook. Need to go through Gallery3D instead.
MoxierMail
apk: moxiermail
Music Player (Hidden)
apk: Music.apk
OfficeSuite
apk: officesuite
PC Companion (PC-Sync Service)
apk: PcCompanion
PlayNow
apk: playnow*
Quadrapop (Game)
apk: quadrapop
Recent Calls (Widget)
apk: RecentCalls
Status Switch (Widget)
apk: StatusSwitch
Sony Ericsson Synchronisation
apk: Sync SyncWizard OmaDatasyncService
Search (Widget)
apk: SearchWidget
SetupWizard
apk: SEMCSetupWizard
TimeScape
apk: Timescape* TimeScape*
TrackID
apk: trackid
Voice Dialer
apk: VoiceDialer
Wallpaper Chooser (Selector in Titanium)
apk: Wallpaper Chooser
standard wallpapers: /etc/customization/content/com/sonyericsson/android/wallpaperchooser/wallpaper/
Drawbacks:
No Standard Wallpapers available anymore
Workaround: Get "Wallpaper Set and Save" from Market
Wisepilot
apk: wisepilot
YouTube
apk: YouTube
Excess Keyboards
Note: Keep one of these around, so you can type Or install some Keyboard from the Market before you remove these.
SE Default English
apk: textinput-tng
Chinese
apk: chinesetextinput
Danish
apk: Danish_Keyboard
English
apk: LatinIME
Korean
apk: SEMCTouchPalKoreanQWERTY
Japanese
apk: JapaneseIME
Click to expand...
Click to collapse
Thank you very much but why deleting all the keyboards ?
Not everybody wants to keep any of them. I personally only keep the JP one (and install swype per custom-folder) because I haven't looked for a better JP one yet. And as a little hurdle for those that don't care to read. This is supposed to be configured to everyone's own needs, not to what I dictate, else it would just be scripts without a config-folder
So if i don't want ie the english keyboard to be removed i just remove the English file from the Clean Keyboards ?
Indeed.
It only removes those that have files in the folders.
If you want to keep all, remove the whole directory.
If you want to keep only english, just remove the English file.
It's kinda weird because the .bat went fine, closed and my phone rebooted but the fonts didn't change ,there were no amelioration of Quadrant's score and it's a bit laggy. But the replacements apps ect... are here so I don't know what went wrong :/
Can you pull the log files from your phone? (in /sdcard/post-root/logs) and post then zipped or pastebin them?
My phone went up to almost 700 on second quadrant-run after another reboot (I had one run with 400 before that reboot, one with 620 or so after it)
And that's with a lot of other junk installed.
Well I ran it a second time and same, I can't seem to mount my SD Card, I click on mount and it does nothing... I had this a problem a long long time ago and had to reflash the phone...
EDIT : it just mounted without me touching anything.
Here is the log
can you do adb pull /sdcard/post-root/logs in a cmd in the program folder from the extracted zip?
I zipped all the files there was in logs is it ok ?
Thanks =)
Seems I might've overlooked something simple.
I'm reflashing my phone again, atm.
As a quick fix for now:
install busybox from market, install the git-version and then run the scripts again
that *should* fix it, unless I overlooked something.
What do you mean by git-version ?
EDIT : Nevermind. I'm re-doing the .bat
Well it worked like a charm ! Thank you ttxdragon, the installation was way faster than before and the fonts worked.
Quadrant score : 575 at the first boot, i'm rebooting atm
698 after !
i cant do it :S
it always says that any device had been found
Jonika21 said:
i cant do it :S
it always says that any device had been found
Click to expand...
Click to collapse
You need your phone to be turned on and USB Debugging also with of course the usb wire plugged to your phone.
If all of those things are done it should not display that.
debug mode... xD
problem solved
zyryck said:
What do you mean by git-version ?
EDIT : Nevermind. I'm re-doing the .bat
Well it worked like a charm ! Thank you ttxdragon, the installation was way faster than before and the fonts worked.
Quadrant score : 575 at the first boot, i'm rebooting atm
Click to expand...
Click to collapse
Glad it worked.
Uploaded v0.1 -- Now it should work even without installing busybox from market first.
I was being an idiot...
Thank you very much for this optimizer, works like a charm
Quadrant score - 699.
One question though. I used the v0.0, and I'm not a fun on the LCD Change, so I'd like to know if I just remove the file as stated in v0.1, will it make it 240 as before?
quadrant score - 673
nice work !
Yes, it would change the Density back. It'll do everything over again, including the JIT (in which step the density gets changed, too)
Glad it worked for you =)
you can simply download from market lcd density. you will find 3 programs, choose the free one, and change to 240..
i've done that, it worked
sorry my bad english xp
link download in my homepage ... sr because im new member ...
Above is the link of the software is necessary and worth playing game for the PC OS WM6.x spend. Includes:
1.App Personalizer_3.1_CAB.zip :
Change your network LOGO become your style ... so Cool !!!
SdkCerts.cab be installed in conjunction with the link above ..
2.App Astronout Win7 SMS Skin v0.79.653.cab :
It helps change the SMS editor:
3.Game online ChuaNhan :
MMO Game has very good background on the WM. how to play attractive and appealing your system with extensive skills and goods are released in the U.S.Ver Vietnamese ... some pictures:
If you want to study vietnamme , i think u shoud play this ver .
4.App PPC Installer :
-NetFW3: need to run some applications and games,
-unicode font for the web,
-Vnkeyb: big-screen keyboard easy to type text,
Active-enabled Flash 3 Flash for your computer,
-Extracting 7zip program and popular file compression,
-BeejiveIm support yahoo chat program, v. ... V,
-XperiaTweak2_,
-Wifi_G54b.cab,
-R3A-X1 XperiaCamera.cab for anyone not spend a camera .... v, etc.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Additional resources:
[Guide+Video] How to Play Fallout 1 with Dosbox Turbo
[Guide+Video] How to run Fallout 1 & 2 on Android with QEMU
[Guide+Video] How to Play PC Games on Android with DosBox Turbo
[Guide+Video]How to Play Classic PC Games on Android with Exagear RPG/Strategies
[Guide+Video] How to the Play Baldur's Gate Series and Planescape: Torment on Android with GemRB
Fallout 1&2 QEMU Android installation guide:
Fallout 1&2 are fully playable on Android with the Android X86 emulator QEMU. Today you will learn how to install and play your own copy of Fallout 1&2 on Android with QEMU.
Games are Not included! (Some Assembly Required)
QEMU Fallout Video:
System Requirements
Recommended System Requirements:
CPU: Quad-Core/Octa-Core device 1.6Ghz+
RAM: 2GB-3GB+
HDD: 16GB
Minimum Requirements:
CPU: Dual-core 1.5Ghz+
RAM: 1GB (My default setup uses 256MB)
HDD: 8GB
Note:If you only meet the minimum requirements, then see Step 7 and use the optional Fallout2 Config without Video & Ambient sounds.
Emulated PC Gaming System
CPU: Pentium Processor
GPU: Cirrus Logic+ 2MB (2D)
RAM: 256MB(Default)
Audio: Sound Blaster 16
HDD: HDD image files mounted from your devices internal(default) or external storage. Full install around 2.5GB
Tested Devices: Note2, HP TouchPad, Galaxy s3, Galaxy s1 i9000
How to install Fallout on your Android device:
1)You will need Fallout 1or2 the game fully installed on a PC (Not provided here)
Download QEMU Emulator for Android:
2)a]Version 1.0 for Playing Fallout 2 Regular QEMU here
Or
2)b)Version 2.0 for Playing the Fallout 2 Restoration Project QEMU here
Note: Version 1.0 is more stable but will not work properly with the Restoration Project.
3)Getting Fallout 1 & 2 setup to Play on Android:
Fallout 2
-If you wish to play Fallout 2 I recommend installing Killap’s unofficial fallout 2 patch.
1) Download and Extract the Unofficial patch here, open the folder.
2) Open the extracted patch folder, copy the "data" folder and paste it into your Fallout 2 install directory. (yes to overwrite the files)
3) Open the "Windows 95-98-ME" folder and copy and paste these files into your Fallout 2 install directory. (yes to overwrite the files)
4) Open the “Batch_work’ folder and copy and paste these files into your Fallout 2 install directory. Run the "master_dat_fix_up.exe" file (A window will popup, wait for it..)
5) Next this is EXTREMELY important, in your Fallout 2 install directory delete a file called "patch000.dat"
6) Download and install one of my custom Fallout cfg files here by copying and pasting it into your Fallout directory. These config files correct the game path for the sound data files.
a)Config With Video & Ambient sounds: This is the standard required config file the fixes the sound directory path.
b)Config without Video & Ambient sounds: This increases performance by removing ambient and video sounds. If you experience crashing when the videos play then, you will need this file. Note*NPC conversations will still have spoken dialogue.
7) (Optional) You can also install Mash’s resolution patch here, to increase your screen size.
Note This may impact game performance but allows you to see much more of the map at once.
Download Fallout2 Hi-Res Patch v3.06 here
Fallout 2 Restoration Project
Note(Important) The Fallout 2 Restoration Project requires a faster device to run than a regular install of Fallout2. A fast Dual or Quad core device with 2GB+ is Recommended
-If you wish to play Killaps Fallout 2 Restoration Project on Android then you must do the following.
1) Download and Extract the manual Restoration patch here, open the folder.
2) Open the "main" folder and copy and paste these files into your Fallout 2 install directory. (yes to overwrite the files)
3) Open the "Windows 95-98-ME" folder and copy and paste these files into your Fallout 2 install directory. (yes to overwrite the files)
4) Open the “Batch_work’ folder and copy and paste these files into your Fallout 2 install directory. Run the "f2.bat" file (A window will popup, wait for it..)
5) Next this is EXTREMELY important, in your Fallout 2 install directory delete a file called "patch000.dat"
6) Download and install one of my custom Fallout cfg files here by copying and pasting it into your Fallout directory. These config files correct the game path for the sound data files.
a)Config With Video & Ambient sounds: This is the standard required config file the fixes the sound directory path.
b)Config without Video & Ambient sounds: This increases performance by removing ambient and video sounds. If you experience crashing when the videos play then, you will need this file. Note*NPC conversations will still have spoken dialogue.
7) Download the citylimit49_mapper here and place it into your Fallout 2 folder. Run the exe to extract the files. (yes to overwrite the files)
-Look in the Fallout 2 folder for the F49+.exe file that was extracted and run it(Do it!). It will fail to patch the mapper but will patch the Fallout.exe and allow us to play the restoration project.
Fallout 1
-If you wish to play Fallout 1 I recommend installing the Dos Patch and launching the game from the Dos exe file.
1)Download and install Fallout 1 the game on your PC. Get the DRM free GOG version of Fallout 1 here
2)DOS is no longer included with newer versions of Fallout 1(GOG). You will need to add support for it by doing the following:
-Download the Fallout 1 Official v1.1 DOS Patch here
-Extract the DOS patch files directly into your Fallout 1 game folder
-Download and extract the following DOS files into your Fallout 1 game folder, dos4gw.exe here, hmidet.386 and hmidrv.386 here
3) Download and install one of my custom Fallout 1 cfg files here by copying and pasting it into your Fallout 1 directory. These config files correct the game path for the sound data files.
-There are two different config files. The one without video & ambient noise is for slower devices that just meet the Min system requirements or have performance issues.
4)Optional) I also installed this NPC patch from the no mutants allowed website. This allows you to edit your follows weapons and inventory, like Fallout 2. Download and extract these files here into the Data folder in your fallout 1 directory.
4) Download and Extract either the 2GB or 1GB empty HDD.img files to an easy to find location on your PC. Bigger is Better, for improved stability! Default is 2GB.
5) Install the free 30 day trial of WinImage and run the application. Be sure to use it before 30 days passes.
Download WinImage 10.0 here
6) Open the empty HDD.img by dragging it into the open Winimage program. Or navigating to it from file/open
7) Locate your fully installed Fallout 1 or 2 game folder. Transfer the Fallout game folder into the HDD.img and save it. This should include Killaps Patches and Mash’s resolution patch. I would recommend playing at 640x480 if you have a dual core device. You can attempt 800x600 or 1024x768 if you have a quad core device. Single core devices should use my No Video or Ambient noise Fallout cfg.
(Optional) You can install one of my custom Fallout cfg files by copying and pasting it into the Fallout directory.
a)Config With Video & Ambient sounds: This is recommend to improve screen scroll performance and sound compatibility.
b)Config without Video & Ambient sounds: This has the same sound tweaks but further increases performance by removing ambient and video noises. Note*NPC conversations will still have spoken dialogue.
8) Save your new HDD.img and close the program.
9)Copy and paste your new Fallout2 HDD.img into the SDL folder in your downloads.
10)Transfer the sdl folder to your devices internal memory. This will be the location that opens when you plug in the USB cable.
11)Transfer the libSDL.apk to your device and install it. Note* you may need to Enable 'Unknown Sources' from Settings/Security/Enable.
12)Run the libSDL.apk and start windows. Skip scan disk if it comes up.
13)Play Fallout2 on Android and wander the wasteland.
Important Notes
How to improve the controls:
-Setting up custom onscreen controls or using Bluetooth/OTG devices can help make games playable on your device.
-I recommend adding custom onscreen controls with the paid GameKeyboard + app here
-Follow the apps setup instructions
-Customize the onscreen controls
-Reduce the transparency to better see the game with the onscreen overlay.
-Enable Non-Blocking mode so that the onscreen controls won't block QEMU touchscreen input.
-GameKeyboard + Screenshot with Fallout 2 Setup.
Get the free Hackers Keyboard here. It has a better layout for playing games and includes directional keys.
Image file app for Android:
To access your image files from Android install the free Zarchiver app from the Play Store here. This will allow you to modify and create images files from your Android device.
SDL cfg File:
-Located in the sdl folder you will find the sdl.cfg file. This allows you to edit the instructions given to the emulator.
-You can edit and save changes to this file using notepad.
-Here is the default line for the sdl.cfg file.
/sdl -L . -m 256 -boot c -hda c.img -hdb HDD_2Gb.img -usb -usbdevice tablet -soundhw sb16
-You can increase or decrease the memory amount allocated to the the app by modifying the value of –m 128(reduced) or -m 256(default) or -m 512(+recommended)
-The Default is 256MB for compatibility.
-Set the emulated memory size to half of your total system Memory size. So if your device has 1GB of DDR use the 512 setting.
-You can change the name of the HDD –hdb HDD_2Gb.img Note*It Must match the exact name in your sdl.cfg file.
-Add additional HDD’s by adding sequentially lettered –hd(x) Like so
- /sdl -L . -m 256 -boot c –hda c.img –hdb hdd_2Gb.img –hdc hdd_2Gb.img –hde hdd_2Gb.img… ect
-The default is HDD_2Gb.img but you can edit the file with notepad. Just change the 2 to a 1, to use the HDD_1Gb.img, save and exit.
Extra HDD for Virtual Memory:
-I would highly recommend attaching a 1/2GB HDD used only for virtual memory. You can use the Virtual Memory sdl cfg line below.
-Once you are running the emulator right click on the vault 13 desktop icon and choose properties, select the performance tab.
-Next select “virtual memory” at the bottom, click “Let me specify my own virtual memory settings” and select the HDD you attached.
-It will prompt you to reboot once you exit. Don’t reboot, choose no, and then shutdown and re-launch the emulator.
-This will help to keep System Resources between 98-99% free. This helps to optimize the performance and improve stability.
-You can check the performance by right clicking on the desktop vault computer and selecting properties. Navigate to the performance tab at the top and look for “System Resources:98%free”.
Virtual Memory sdl cfg:
/sdl -L . -m 512 -boot c -hda c.img -hdb HDD_2Gb.img -hdc HDD_1Gb.img -usb -usbdevice tablet -soundhw sb16
Troubleshooting:
-You must click the volume bottom before you can move the mouse.
-To help maintain stability try and minimize back ground app activity while running Fallout.
Note*Fallout1&2 runs reasonably stable. Reasonably stable = testers report gaming session of 1-3hrs.
Links:
ExaGear(Paid App):
[Guide+Video]How to Play Classic PC Games on Android with Exagear RPG/Strategies
Note Currently the fastet PC gaming solution on Android.
DosBox Turbo Version(Paid/Free App):
[Guide+video] How to Play PC Games on Android with DosBox Turbo (Thread)
-Note The Dosbox Turbo version Plays Dozens of Games and has full touchscreen/controller support. Plus 3Dfx Voodo1 support that adds an additional 8MB video memory.
How to Play Baldur’s gate on Android [XDA] Thread]
How to Play Baldur’s gate on Android [Video]
[Guide+video] How to Play PC Games on Android with DosBox Turbo - xda-developers
Fallout 1 Patches @ No Mutants Allowed:
Fallout 2 Patches @ No Mutants Allowed:
Fallout 2 Restoration Project Thread by Killap
First of all: Iam sorry to bump such an old thread.
However Id like to thank you for all info you shared so far.
Now here for the question why I bumped this thread: Is it possible to remap the hardware buttons for the bochs emulator?
I would be very thankfull if anyone could tell me how to do this.
Kind regards, Stefan.
While this will likely be a necropost I just had to say thank you. This is a great discovery, and not something I could have found out myself. Thank you so much for sharing and I hope many others are able to find a use of this.
I am hoping I might be able to use this method for Lords of Magic
you are sweet
Emulator Gaming
orcus2190 said:
While this will likely be a necropost I just had to say thank you. This is a great discovery, and not something I could have found out myself. Thank you so much for sharing and I hope many others are able to find a use of this.
I am hoping I might be able to use this method for Lords of Magic
Click to expand...
Click to collapse
I haven't tested this game myself but its rather hit or miss on what will run. Fallout 1/2, Diablo1 will run for sure but I haven't tested many games. My goal was to make Fallout playable for all Android users.
If this method doesn't work you could also try using the DosBox Turbo Method. You can open the hl.img and just put other games in place of hl. It might require you to tweak the DosBox config file.
Watch the How to play Half Life 1 video on Android Here! You can find links to info and downloads in the description.
I've actually got HL1 running at double the fps on my Note 2 but I haven't made a video yet.:highfive:
eek:n Xperia Neo V any fallout can be playable???
Anybody test F1 or F2???
If F2 will be playable restoration project 2.1.2b will be playable too?????
Read the OP
BillyKidMK2 said:
eek:n Xperia Neo V any fallout can be playable???
Anybody test F1 or F2???
If F2 will be playable restoration project 2.1.2b will be playable too?????
Click to expand...
Click to collapse
I would recommend reading the OP
Recommended System Requirements:
CPU Quad- Core, Dual-core 1.5+GHz, equivalent or better.
GPU Adreno 220, Nvidia Tegra2/3, equivalent or better.
1GB, 512. My Config asks for a min or 256MB & shouldn't be run on a device with less than this.
8GB disk space
Minimum System Requirements:
1Ghz CPU with 256MB of Ram
4GB Disk Space
Note*2)Fallout2 Config without Video & Ambient sounds should be used, see step # 4
Sorry to revive, but I for the life of me cannot get this to work. I'm on a Galaxy SIII and followed the instructions. Have restoration patch, removed the files that needed to be to removed. Only thing really is I renamed the hdd to Fallout2, which I also fixed in the sdl. I get the first loading screen and that is it. Freezes every single time.
Fallout Troubleshooting
Hishuro said:
Sorry to revive, but I for the life of me cannot get this to work. I'm on a Galaxy SIII and followed the instructions. Have restoration patch, removed the files that needed to be to removed. Only thing really is I renamed the hdd to Fallout2, which I also fixed in the sdl. I get the first loading screen and that is it. Freezes every single time.
Click to expand...
Click to collapse
Hi, which loading screen are you stuck at? When you launch the game or when you launch the emulator? Make sure to read the troubleshooting sections. To run the restoration patch you must be using the Fallout Launcher 2.0 version for DX 9C support. One single letter or number wrong in the sdl will cause the game to fail at launch. Logic would dictate that if you're having problems when changing the names, then don't change them. Its all set up and ready to go, test it like that before modifying the setup.
Tweaking the CPU Settings:
Increasing the minimum CPU frequency may help to improve stability. You can use the free CPU Master App. Also set the CPU governor to Performance or on demand. Don’t forget to set it back to normal after your finished exploring the wasteland.
-You can change the name of the HDD –hdb HDD_2Gb.img Note*It Must match the exact name in your sdl.cfg file.
-Add additional HDD’s by adding sequentially lettered –hd(x) Like so
- /sdl -L . -m 256 -boot c –hda c.img –hdb hdd_2Gb.img –hdc hdd_2Gb.img –hde hdd_2Gb.img… ect
-The default is HDD_2Gb.img but you can edit the file with notepad. Just change the 2 to a 1, to use the HDD_1Gb.img, save and exit.
I'll try again after work. It was freezing on emulator load. Tried 7 times and it finally went then shot back to main screen after a min. Got rid of everything so I can redo from scratch. P.S. just r realized I was using the GOG version, I still have the original CD so I'll try that when I get back
Fallout fixing
Hishuro said:
I'll try again after work. It was freezing on emulator load. Tried 7 times and it finally went then shot back to main screen after a min. Got rid of everything so I can redo from scratch.
Click to expand...
Click to collapse
Redoing it from scratch is the best idea. Freezing at launch generally indicates a problem with the sdl config or sdl file. I'll be online since i'm updating some Touchpad stuff, let me know if you get it working.
Still occasionally freezes on first load up or gets to desktop the kicks me out after a bit. Just 3 times so far, but I'm sitting on the desktop right now. I removed the ddraw files like you said but it says error can't find rez ini
More info
Hishuro said:
Still occasionally freezes on first load up or gets to desktop the kicks me out after a bit. Just 3 times so far, but I'm sitting on the desktop right now. I removed the ddraw files like you said but it says error can't find rez ini
Click to expand...
Click to collapse
You're not giving my any new information. Are you using the 2.0 version? Have you set the governor to performance like in the notes?
Tweaking the CPU Settings:
Increasing the minimum CPU frequency may help to improve stability. You can use the free CPU Master App. Also set the CPU governor to Performance or on demand. Don’t forget to set it back to normal after your finished exploring the wasteland.
Did you redownload everything? Have you tried running it without the restoration patch? What version of Fallout 2 are running, CD,GOG, Steam? Have you minimized background app activity? Are you using the default sdl line? if not Let me see the sdl line you are using. Its been confirmed to work on your device so it must have something to do with your setup or config.
Sorry, yes I'm using 2.0 and I've upped the cpu as well. First attempt was GOG but then I just reinstalled the original cd and tried that as well with same results. Played vanilla hundreds of times, never really played the restoration so I would like to get that to work. Background apps are not running, phone is rooted.
sdl
/sdl -L . -m 512 -boot c -hda c.img -hdb HDD_2Gb.img -usb -usbdevice tablet -soundhw sb16
just tried 512
Hishuro said:
Sorry, yes I'm using 2.0 and I've upped the cpu as well. First attempt was GOG but then I just reinstalled the original cd and tried that as well with same results. Played vanilla hundreds of times, never really played the restoration so I would like to get that to work. Background apps are not running, phone is rooted.
sdl
/sdl -L . -m 512 -boot c -hda c.img -hdb HDD_2Gb.img -usb -usbdevice tablet -soundhw sb16
just tried 512
Click to expand...
Click to collapse
Try installing killaps regular fallout 2 patch with the GOG version and the version 1.0 img. The 1.0 is more stable but won't run the restoration project.
Also set the CPU governor to Performance or on demand. This will keep the CPU frequency more stable, the emulator doesn't like the constant fluctuations that Android normally does.
Also keep the memory low till we know if you have too much back ground activity. Since you're rooted you can use the Cool tools system stats app to monitor what is going on. Do you have the S3 model with 2GB or 1GB?, 2 would be better for gaming.
Says 1.2 gbs for ram. In 1.0 it says can not find directx when i launch the game
---------- Post added at 05:18 AM ---------- Previous post was at 05:12 AM ----------
Can not load directx, this program requires windows 95 with direct x 3.0a
manually install Killap's Unofficial Fallout 2 Patch
Hishuro said:
Says 1.2 gbs for ram. In 1.0 it says can not find directx when i launch the game
---------- Post added at 05:18 AM ---------- Previous post was at 05:12 AM ----------
Can not load directx, this program requires windows 95 with direct x 3.0a
Click to expand...
Click to collapse
#1 solution for that problem is installing this patch
-Fallout2: If you have problems launching Fallout 2, manually install Killap's Unofficial Fallout 2 Patch (US/UK - manual install)
Killap's Unofficial Fallout 2 Patch (US/UK - manual install) Download:
#2 solution reinstall direct X. If you've crashed the emulator enough times that might mess it up too and you will need to recopy it to the device again.
http://www.falconfly.de/directx.htm
RolandDeschain79 said:
#1 solution for that problem is installing this patch
-Fallout2: If you have problems launching Fallout 2, manually install Killap's Unofficial Fallout 2 Patch (US/UK - manual install)
Killap's Unofficial Fallout 2 Patch (US/UK - manual install) Download:
#2 solution reinstall direct X. If you've crashed the emulator enough times that might mess it up too and you will need to recopy it to the device again.
http://www.falconfly.de/directx.htm
Click to expand...
Click to collapse
Just did both before your post. Same thing still happens. Thanks for you help though, going to bed pretty soon and will be leaving for a week in the morning, I'll have to try again when I get back
---------- Post added at 05:56 AM ---------- Previous post was at 05:51 AM ----------
Hishuro said:
Just did both before your post. Same thing still happens. Thanks for you help though, going to bed pretty soon and will be leaving for a week in the morning, I'll have to try again when I get back
Click to expand...
Click to collapse
checked out directx in the emu and everything shows fine and the tests ran fine as well.
Hishuro said:
Says 1.2 gbs for ram. In 1.0 it says can not find directx when i launch the game
---------- Post added at 05:18 AM ---------- Previous post was at 05:12 AM ----------
Can not load directx, this program requires windows 95 with direct x 3.0a
Click to expand...
Click to collapse
FYI a memory size of 1.2Gbs is not possible so you are doing or reading something wrong. The S3 has two models one with 1Gb the other with 2Gb.
Hishuro said:
Just did both before your post. Same thing still happens. Thanks for you help though, going to bed pretty soon and will be leaving for a week in the morning, I'll have to try again when I get back
---------- Post added at 05:56 AM ---------- Previous post was at 05:51 AM ----------
checked out directx in the emu and everything shows fine and the tests ran fine as well.
Click to expand...
Click to collapse
Please answer my questions fully. I'm aware direct x is installed, I created the img.... If You installed direct x what version did You use? Did you try using the 2.0 version to launch the regular game? Did you install sfall too? You didn't tell me what version you installed this time either, I recommended the GOG version. Are you using my custom configs?
Edit: It just occurred to me that you might be reinstalling fallout into the same folder that already contains the patches. This would explain when you keep getting the same message. You will need to uninstall the game and delete the left over data to be sure. If you uninstall and reinstall without deleting them they just remain there.
Fallout Tactics update
Hello Fallout fans. Today I got a new Fallout launcher working with DosBox turbo. The Result is that you can play Fallout 1 and 2 on Android very stably with a fully touchscreen interface, on screen keyboard, Joystick and Bluetooth devices. I still have to finish tweaking and testing it but very soon I will make a new video about it. In addition many other X86 PC games will soon be playable on Android. So stay tuned to see the future of PC gaming on Android. Please Stand By!!
Here is the first screenshot ever taken of Fallout Tactics running on Android. Currently the cut scene videos crash the game but I was able to load and play the game.
Fallout 2 runs betters than I have ever seen on a mobile device and is much more stable than using QEMU. Killaps Restoration project is also working with DosBox turbo.
Dosbox Turbo X86 compatibility list for the Fallout Launcher Beta:
Age of Empires
Age of Empires 2
Arcanum (Works but takes 10min+ to load)
Diablo 1
Fallout 1
Fallout2
Fallout2: Restoration project
Fallout Tactics (Turn off 3D sound 800x600 16 bit)
Half life
Simcity 3000
Starcraft
The Sims
Works with daemon tools:
Homeworld 1
Jedi Knight dark forces 2
Additional resources:
How to Play Fallout 1 with Dosbox Turbo
[Guide+Video] How to run Fallout 1 & 2 on Android with QEMU
[Guide+Video] How to Play PC Games on Android with DosBox Turbo
GemRB Guide
Hello and welcome to the GemRB guide for playing Infinity engine games on Android. Your favorite RPGS Baldur’s gate1, Baldur’s gate2, Planescape: Torment, IceWind Dale, and IceWin Dale2, on your Android device. Here I use my mighty HP TouchPad with CM10 to battle my way through a classic RPG.
The Full Step by Step Video Guide:
Download the Step by step GemRB Guide Here:
1) Install The GemRB app from the Google Play Store:
2) Install the ES file explorer from the Play Store:
3) Once the GemRB app is installed open it and you will see the following screens.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4) You will be prompted to install 2 of these 3 files
Thebalder’s Gate 2 demo(800MB) (Optional)
GemRB data(override)
GemRB data(scripts)
-Select ok
5)a)Next choose the best Display size for your device and the install will complete and Exit.
-If you find the mouse emulation in the game is off then you might need to try a different size.
Or
If you wish to change or view the install directory then do the following.
5)b)Select “Show more options” to check or change the install directory.
-Select “Data installation location”
-Now you can choose the install location and folder name.
-Select OK and install the GemRB data files.
-After GemRB installs the data files it will show a black screen and then exit the application.
6) Open the ES File Explorer and go to the location where GemRB was installed.
-The default data directory will be /app-data/net.sourceforge.gemrb/GemRB.cfg.sample
- Once here rename "GemRB.cfg.sample" to "GemRB.cfg"(See picture)
7) Next tap the renamed GemRB.cfg file to open it. Select “text” and choose the “ES Note Editor”. Once open you will need to click the three dots in the upper left corner and select edit.
8) You will need to make changes in two sections of the Config file.
-First you must select the GameType=(YourGame)
-You will see a list of supported games below.
-The app will attempt to auto select the right game by default.
#####################################################
# #
# Game Type [String] Use one of the following #
# values: #
# #
# auto Attempt to autodetect game type #
# bg1 Baldur's Gate #
# bg2 Baldur's Gate 2 : SoA or ToB #
# tob Baldur's Gate 2 : ToB (obsolete) #
# iwd IceWind Dale (no How or ToTL installed)#
# how IceWind Dale : HoW or ToTL #
# iwd2 IceWind Dale 2 #
# pst Planescape Torment #
# (More will come) #
# #
#####################################################
GameType=bg2 (Here Baldur's Gate 2 is selected)
9) Next scroll down the page and set the Game path
-Below you will see the default GamePath
-You will need to change this for your chosen game.
(Default)
#####################################################
# Game Paths [String] #
# #
# These are the paths where the Game you want to #
# play is installed. #
# Enter the full path to the directory. #
#####################################################
GamePath=./
CD1=./
CD2=./CD2/
CD3=./CD3/
CD4=./CD4/
CD5=./CD5/
#####################################################
-You must enter the correct Game Path for GemRB to locate your game data and run the game.
-Once you have entered the Game Path location, save the changes by touching the save arrow in the upper left corner and select Yes.
-The follow game paths are meant to be used with the GOG versions of Baldur’s Gate, Baldur’s Gate2, Planescape:Torment, IceWindale, or Icewindale 2.
- My game paths assume the data will kept in a folders titled with the games name (bg1, bg2..ect)
-You can create multiple folders and switch between games by modifying the game paths or folder names.
Working Game Paths:
Baldurs’s Gate 1
GamePath=./bg1/
CD1=./bg1/data/
CD2=./bg1/data/
CD3=./bg1/data/
CD4=./bg1/data/
CD5=./bg1/data/
Baldur’s Gate 2
GamePath=./bg2/
CD1=./bg2/data/
CD2=./bg2/data/
CD3=./bg2/data/
CD4=./bg2/data/
CD5=./bg2/data/
Planescape: Torment
GamePath=./pst/
CD1=./pst/data/
CD2=./pst/data/
CD3=./pst/data/
CD4=./pst/data/
CD5=./pst/data/
Ice Windale Complete
GamePath=./how/
CD1=./
CD2=./how/CD2/
CD3=./how/CD3/
CD4=./
CD5=./
Ice Windale 2
GamePath=./iwd2/
CD1=./
CD2=./iwd2/CD2/
CD3=./
CD4=./
CD5=./
10) Install your selected game onto your computer. All these game are available for digital download and purchase from the Good Old Game Store (GOG.com)
http://www.gog.com/catalogue
If you Install the GOG versions of Baldur’s Gate, Baldur’s Gate2, Planescape: Torment, IceWindale, Icewindale 2, then you can use the follow GamePath configurations.
C:\Program Files (x86)\GOG.com\Baldurs Gate II (GOG path default)
C:\Program Files (x86)\Black Isle\Baldurs Gate II (CD path default)
Saved Games:
-Windows 7/8 users who want to keep their saved games will need to create a new folder called “save”.
-You have to enable hidden files in folder options to see find the saves or just type the path directly in Explorer. Open the file and copy and paste your saved games into the new save folder.
C:\Users\<Your name Here!>\AppData\Local\VirtualStore\Program Files (x86)\GOG.com\Baldurs Gate
11) You will need to download and install Tweak & Fix packs for your chosen game from gibberlings3.net Tweak & Fix Pack Downloads:
-Fix packs will patch many issues that would otherwise make the game unplayable on Android.
-If you experience crashing when traps are sprung in Bg2, then you don’t have the fix pack installed.
-Tweak packs will modify and improve the game play for your Android device.
-One tweak will allow you to stack inventory items so you can carry more and micromanage less.
-The infinity engine modding community updates the Tweak & Fix packs regularly so check back here for updates.
-Download the Tweak & Fix packs for the game and OS (Windows, OS X, Linux) you have installed.
-Install the Tweak & Fix packs by running the .exe and directing it to the location where you installed the game.
-Be sure to check to double check that the correct location for the patches is used.
-By default the files will be installed in the CD version of the games directory and not the GOG directory.
C:\Program Files (x86)\Black Isle\Baldurs Gate II (CD path default)
C:\Program Files (x86)\GOG.com\Baldurs Gate II (GOG path default)
Optional Resolution Patch:
- You can increase the games resolution to better take advantage of your devices screen size.
-Before running this patch you will need to know what resolution your device supports. You can Google --Search the name of your device and “resolution” to find out.
-The default game resolution will be 640x480.
-Download and install the Patch, be sure to check that the install directory is correct.
C:\Program Files (x86)\GOG.com\Baldurs Gate II (GOG path default)
C:\Program Files (x86)\Black Isle\Baldurs Gate II (CD path default)
-You will see the follow questions:
Install Component [Widescreen Mod]?
[R]e-install, [N]o Change, ninstall, [Q]uit or choose one:
1] for the original Infinity Engine (CHOOSE THIS!) (Don’t Choose this)
2] for GemRB(Choose This)
-Choose number 2 and press enter.
-Number 1 is for modding the resolution to play the games on your PC.
-Next you will enter your resolution as X Y coordinates.
-My HP TouchPad has a resolution of 1024(X) x 768(Y)
-Enter your X coordinate. It should be a number, >= 640.
-This is your default X resolution 640, enter your device's screen width=X
-Enter your Y coordinate. It should be a number, >= 480.
-This is your default Y resolution 480, enter your device's screen height=Y
Are you sure? Y/N
-choose y and press enter
-The patch will now mod the game files and exit.
12) Open to the folder where you installed the game data plus Tweak& fix packs.
-It is recommended* to Delete the files that end in .exe, these are not needed.
-I would recommend backing them up in another folder.
-Note* even if you fail to remove these the games still seems to run fine.
-Rename the folder that contains your game data.
-This Must be the same as your GamePath name. GamePath=./bg2/
-For this Example I used Baludr’s Gate 2 as the folder name (bg2)
-You can create several different game folders and switch between games by changing the folder path or names.
-You could use any of these Examples:
-bg1 Baldur's Gate
-bg2 Baldur's Gate 2
-iwd IceWind Dale
-how IceWind Dale
-iwd2 IceWind Dale 2
-pst Planescape Torment
13) Transfer the Game Data folder to your Android device with the USB cable.
-Copy the folder to the location you installed GemRB, /app-data/net.sourceforge.gemrb/
-Note the Game files are very large and can take up to 2.5 GB of storage space per game.
-Once the Game Data is on your Android device run The GemRB app to play the Game.
Source Information, Beta Downloads and Extras:
GemRB Game Engine Beta Download:
Note*(Recommended) Get the Beta version it includes updates to the game engine and supports multi-touch
1)Download the APK
GemRB-nmake-vs10-v0.7.2.apk
2)Download the Game Data
GemRB-nmake-vs10-v0.7.2.zip
3)Extract the Game Data
- Replace the "GUIScripts" folder with the new one.
- Replace the the"override" folder with the new one.
4)Install the latest gemrb apk.
-Watch this video to learn about installing apk files on your Android device. The methods shown for installing flash are the same for the GemRB apk.
Developers website:
Source install guide here:
Tweak & Fix packs:
Extras:
How to Play Fallout 1 and 2 on Android [GOG]
How to Play Fallout 1 and 2 on Android [No Mutants Thread]
How to Play Fallout 1 and 2 on Android [Video]
How to play Baldur’s Gate on Android[GOG]
Another Project by: RolandDeschain79.
I don't play any of these games, but thank you for sharing with the community your guides are always great. :thumbup:
This is one of the best game ! :victory:
Anyone tried this method yet?
Looks complicated
Works Great but try the Beta Build
Noookiller said:
This is one of the best game ! :victory:
Anyone tried this method yet?
Looks complicated
Click to expand...
Click to collapse
I should note that you will want to get the beta version from the very bottom of the instructions. There are several game engine updates included and multi-touch support. If you experience crashing still when open traps, then you must get this update.
-Enable 'Unknown Sources': In order to install an .apk file from your devices sdcard or internal memory, you first need to enable 'Unknown Sources' from settings/security.
-If you are using Android 4.0+, Ice Cream Sandwich and above, go to Settings/Security and enable 'Unknown Sources'.
-For Android 2.3 and below, go to Settings/Application/enable the 'Unknown Sources'.
-Use the link below to install the Free ES File Explorer File Manager.
-Download the Beta Engine .apk directly to your device Or Download it to a PC/Mac and then transfer it over with the USB cable.
-Install the files download directly to your device by clicking on the notifications.
GemRB Game Engine Beta Download:
Developers website:
*Updated my journal*
+1 thanks
---------- Post added at 05:25 PM ---------- Previous post was at 05:09 PM ----------
will this work on asus nexus 7
Go for It!
garytsat said:
+1 thanks
---------- Post added at 05:25 PM ---------- Previous post was at 05:09 PM ----------
will this work on asus nexus 7
Click to expand...
Click to collapse
It should run fine on your Nexus 7. Runs very well on my HP TouchPad
BG1 on ASUS TF-101
I've followed your instructions and the engine just seems to crash when I launch it, much like the initial launch before the BG1 data is copied. I've installed the GOG version, the tweak/fix pack from Gib3, and installed the widescreen patch as well. I tried to install the updated .72 and .8 beta versions but if it's installed over the Play Store version it won't install at all. Does it matter what version of Android I'm using? I'm on 4.2.2 if it makes and difference.
Just wanted to say, not only did your YouTube guide get bg2 running on my kindle hd, but the dark tower's ending made it my favorite series of all time
And was that a picture of the Master on your YouTube acct? Cuz if so, you're definitely the Man x10
Thanks for the sick tutorials
Sent from my Android Kindle Fire HD 7 Running Cyanogenmod 10.1
problem with mouse
Thanks for your videos. I got everything running but it says that it is detecting a bluetooth mouse when there isn't one and now my pointer is stuck in the top left corner! Is there any way to fix this?
sgabianni1980 said:
Thanks for your videos. I got everything running but it says that it is detecting a bluetooth mouse when there isn't one and now my pointer is stuck in the top left corner! Is there any way to fix this?
Click to expand...
Click to collapse
Glad you enjoyed it, Bluetooth is connected thru Android so try turning it off and unpairing your various BT devices.
my mistake
RolandDeschain79 said:
Glad you enjoyed it, Bluetooth is connected thru Android so try turning it off and unpairing your various BT devices.
Click to expand...
Click to collapse
My apologies...I turned off the bluetooth but it actually says hardware mouse detected...mouse emulation disabled.
Any suggestions?
Thank you
Thank you for the guide. I followed instruction, but for some reason it did not work. On startup, it crashed. I was unable to get to the BGII screen.
Is it because I have the ToB expansion as well? I purchased the extended edition on GoG.com.
Thanks!
(I'm trying Planescape: Torment right now)
---------- Post added at 07:40 PM ---------- Previous post was at 06:50 PM ----------
PenguinColada said:
Thank you for the guide. I followed instruction, but for some reason it did not work. On startup, it crashed. I was unable to get to the BGII screen.
Is it because I have the ToB expansion as well? I purchased the extended edition on GoG.com.
Thanks!
(I'm trying Planescape: Torment right now)
Click to expand...
Click to collapse
Just kidding, I figured it out. I had to put it all in a folder called bg2.
Anyone figured out a way of inputting a character name at the creation point of the game without a physical keyboard?
Never mind, found the faint icon at top left ...:silly:
baldurs gate crashing
Hi, firstly thanks for the guide and the apps that make this possible. Its amazing to have baldurs gate running on android (I'm using a nexus 7 2013). Baldurs gate was running perfectly but I've run into a few occasions where the game crashes during side quests. I can avoid these certain 'crash points' but I'm missing out on parts of the game which isn't ideal. I downloaded a logcat app to capture what's going on, I have no programming knowledge at all so it means nothing to me but I'm hoping someone can help me out. I purchased the game from GOG games with the expansion pack, downloaded and installed as the guide instructs, I didn't install the tweaks pack as I'm trying to keep the game original so whether this is why I'm running into problems I'm not sure. That's the only deviation I took from the guide but I followed everything else to the letter. The crashing occurs on a few quests, for example when starting a particular quest - a few dialogue options then a battle should begin but gemrb crashes, this is the fatal line from the logcat (I can post the whole logcat if required)
04-12 21:48:53.038 29543 29570 F Libc : Fatal Signal 11: (SIGSEGV) at 0x000010b0 (code=1), thread 29570 (GLThread)
And on another quest but on completion an NPC should die and drop an item
04-12 21:53:36.393 31004 31020 F Libc : Fatal Signal 11: (SIGSEGV) at 0x000010b0 (code=1), thread 31020 (GLThread)
I can see theres a similarity in the two logcats and hopefully there's a solution out there. I'd appreciate any help or knowledge regarding the above, thanks if you took the time to read this through.
Many thanks for this - Baldur's Gate is one of my favourite games, and the chance to play it on the Touchpad is very welcome
Thank you, new updates available
Spherewalker said:
Many thanks for this - Baldur's Gate is one of my favourite games, and the chance to play it on the Touchpad is very welcome
Click to expand...
Click to collapse
Hey thanks, don't forget to checkout some of the newer builds of this app. Unfortunately the app hasn't been updated in a longtime but you can manually install updated versions. There is a link to version 7.2 in the thread but there is likely newer versions that I haven't had time to test yet. If you give those versions a go please let me know how it worked out for you and if my info needs updating. I just noticed that links to several pictures are down and I will fix those now.
Cheers
Roland
Source Information, Beta Downloads and Extras:
GemRB Game Engine Beta Download:
Note*(Recommended) Get the Beta version it includes updates to the game engine and supports multi-touch
1)Download the APK
GemRB-nmake-vs10-v0.7.2.apk
2)Download the Game Data
GemRB-nmake-vs10-v0.7.2.zip
3)Extract the Game Data
- Replace the "GUIScripts" folder with the new one.
- Replace the the"override" folder with the new one.
4)Install the latest gemrb apk.
-Watch this video to learn about installing apk files on your Android device. The methods shown for installing flash are the same for the GemRB apk.
Developers website:
Source install guide here:
Tweak & Fix packs:
RolandDeschain79 said:
Hey thanks, don't forget to checkout some of the newer builds of this app. Unfortunately the app hasn't been updated in a longtime but you can manually install updated versions. There is a link to version 7.2 in the thread but there is likely newer versions that I haven't had time to test yet. If you give those versions a go please let me know how it worked out for you and if my info needs updating. I just noticed that links to several pictures are down and I will fix those now.
Click to expand...
Click to collapse
Thanks for the heads-up. When I get the chance I will do and will let you know how it goes.
I have tested today Planescape Torment on the latest 0.8.0 version and I can confirm that now we have multi touch. It can be used to scroll the map.
I am also waiting for ExaGear RPG in order to play Fallout and Arcanum on touchscreen.
Dosbox Turbo for Fallout
natzy85 said:
I have tested today Planescape Torment on the latest 0.8.0 version and I can confirm that now we have multi touch. It can be used to scroll the map.
I am also waiting for ExaGear RPG in order to play Fallout and Arcanum on touchscreen.
Click to expand...
Click to collapse
You can play fallout 1 and 2 already with a reasonably fast android device. Just checkout my Dosbox Turbo thread below
[Guide+Video] How to Play PC Games on Android with DosBox Turbo
[Guide+Video] How to run Fallout 1 & 2 on Android with QEMU
Hi gentlemen,
Could someone share the last offline speech recognition files for French language?
Here the steps to process (5 min)
You need to be rooted
Open Google app > settings > voice > offline speech recognition
Go to "All" tab and download the french (France) package
When it is done, open your file explorer as root and go to /data/data/com.google.android.googlequicksearchbox/app_g3_models
Copy and zip the fr-Fr folder and paste it in your google drive or elsewhere to share it with community
I need it because my SOC x86 Intel Lollipop device is not allowed to download offline voice package by Google. This option is just missing. Unfortunately it is a known issue that some devices are excluded from downloading those files and it can't be fixed in any way.
http://forum.xda-developers.com/showthread.php?t=2549644&page=9
I know this workaround works perfectly because I'm currently using it for the en-US language package v215 that enables offline dictation and voice command.
Thanks
Up ↑
Please
Up please