I heard that version V10C is released, but I couldn't find any update using LG PC Suite IV with my phone connected.
Anyone upgraded already and how?
No update from LG PC Suite IV for me too.
Here they speak about a V10C they had installed too
http://forums.hardwarezone.com.sg/showthread.php?p=50128685
but no other information or download link is available. May be it is a release for some region only.
I guess this is the donwload link:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ANEUBK/V10c_00/V10C_00.kdz
You update it using KDZ_FW_UPD: http://www.mediafire.com/?6do22vdco203d0y
Using the option 3GQCT DIAG.
I did that sucessfully for a Vodafone branded P500 flashing the unbranded V10A:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/APRTBK/V10a_00/V10A_00.kdz
I will try flashing mine with V10C tomorrow,because I don't have time today...
If you are afraid of flashing the V10C,try flashing the V10A and "ask" for updates...mine told me about V10B "Vodafone"...but since I have V10B vodafone,I guess it won't tell me about V10C,because it is the unbranded version...
Use at your own risk..
10A-B-C are same kernel V. but differ region release ?
another one flash B to C and has no differ or update
need changelog =_=
Tried to flash V10C to my phone and gave me error,as the phone only went to emergy mode,I "changed it" for a new one,because I was in the 14 day exchange warranty.
Flashed the new one to V10a,and it only show V10B (vodafone) as update...nothing about v10c.
skinniezinho said:
Tried to flash V10C to my phone and gave me error,as the phone only went to emergy mode,I "changed it" for a new one,because I was in the 14 day exchange warranty.
Flashed the new one to V10a,and it only show V10B (vodafone) as update...nothing about v10c.
Click to expand...
Click to collapse
Tried both on a italian TIM LG .... it stops while ANDROID screen appear .....
That's not a big problem for me (I don't use this phone now) ... I'll wait for a fix .....
Micromind said:
Tried both on a italian TIM LG .... it stops while ANDROID screen appear .....
That's not a big problem for me (I don't use this phone now) ... I'll wait for a fix .....
Click to expand...
Click to collapse
do an hard reset (home+volume down+power on) and wait a bit...
At least,I always have to do that when I flash this phone
An LG employee answering questions in an italian android board says that Italy LG Service has no official communications about V10C update...
rockerduck said:
An LG employee answering questions in an italian android board says that Italy LG Service has no official communications about V10C update...
Click to expand...
Click to collapse
So, take vocabulary and try another language From my site I can try do it in czech, but I thing that it will be same result.
Hey all
I successfully updated my p500 to v10c.
I used kdz_fw_up in english, windows enabler and the kdz provided in this thread.
I started kdz, "read phone information", 3GQCT DIAG, selected the kdz and strated the update.
Halfway through it, it popped an runtime error, i ignored it and let it continue. It finnished the update and only after the update was finnished I pressed the "OK" button in the error dialog causing the application to close. I was using WinXP SP3.
Phone went to emergency mode, removed battery to turn off, placed the battery again, switched on and...... V10c!
1r0n1c said:
Hey all
I successfully updated my p500 to v10c.
I used kdz_fw_up in english, windows enabler and the kdz provided in this thread.
I started kdz, "read phone information", 3GQCT DIAG, selected the kdz and strated the update.
Halfway through it, it popped an runtime error, i ignored it and let it continue. It finnished the update and only after the update was finnished I pressed the "OK" button in the error dialog causing the application to close. I was using WinXP SP3.
Phone went to emergency mode, removed battery to turn off, placed the battery again, switched on and...... V10c!
Click to expand...
Click to collapse
what phone was your?branded?unbranded?what was your firmware?
I am staying with the unbranded v10a,the keyboard is much better than the stock one on the V10b "vodafone pt"
It was a branded V10B for "Optimus PT"
skinniezinho said:
do an hard reset (home+volume down+power on) and wait a bit...
At least,I always have to do that when I flash this phone
Click to expand...
Click to collapse
OH YES! It worked ......
I tried the 3 versions (a, b, c) ... but I can't see any difference .... kernel is the same, errors are the same :-(
Have you tried with D version ?
I just flashed mine (stock LG cell) with this one, and no problems of kernel anymore.
killdashnine said:
Have you tried with D version ?
I just flashed mine (stock LG cell) with this one, and no problems of kernel anymore.
Click to expand...
Click to collapse
Have you got a URL for D version?
corwin42 said:
Have you got a URL for D version?
Click to expand...
Click to collapse
I have following versions:
V10d (ARUSSV) от 18.10.2010 - Russia.
V10d (ACISSV) от 25.10.2010 - CIS.
In the first one there is English, but no Deutsch.
May be you could select it using MoreLocale.
Do you need it? Get here http://4pda.ru/forum/index.php?showtopic=195545
Or just ask me to reupload somewhere.
This is V10d (ARUSSV) от 18.10.2010 - Russia.
http://narod.ru/disk/594135001/V10D_00.kdz.html
it has English, Russian, and using MoreLocale2 you can choose main European languages, Chinese too.
was getting real annoyed with the random LGMITS force stop errors and forced me to consider flashing. no updates found if i use the conventional pc suite method.
I successfully flashed mine from unbranded v10b (i bought my unit locally here in the philippines) to v10c using kdz updater. never encountered any error at all.
when phone rebooted, all my apps were still there as well as my customizations. the only thing different is my phone got unrooted (missing Super User Icon) which I remedied via running z4root again.
I checked settings > about phone and verified version was indeed v10c now.
i connected my phone to lg pc suite 4 and it said there was an update available??? curiously, i let it try to update but as soon as the LG Mobile Support Tool was invoked by PC Suite, it said I already have the latest version (v10c) and stopped at that. Weird.
Anyway, haven't seen the LGMITS force close errors yet, so hopefully this f/w works for me.
UPDATE: started getting the LGMITS errors again. argh!
In these days my O1 should comes back from service (IMHO the GSM reception was very bad). On the LG service site they write "Repaired" and "Operation executed: software update". So, I think we could clarify something about the various V10x versions as soon a read the new version installed on my O1...though I have the suspect to still see "V10A" (like before send the phone to the service)...IMHO it is not possible that the problem was a SW problem, otherwise I should not be the only one with a very bad network reception...
We will see.
ziki said:
In these days my O1 should comes back from service (IMHO the GSM reception was very bad). On the LG service site they write "Repaired" and "Operation executed: software update". So, I think we could clarify something about the various V10x versions as soon a read the new version installed on my O1...though I have the suspect to still see "V10A" (like before send the phone to the service)...IMHO it is not possible that the problem was a SW problem, otherwise I should not be the only one with a very bad network reception...
We will see.
Click to expand...
Click to collapse
so, it seems that some spy-sw was uploaded
hi.
When I bought this phone it was running v1.6 locked to rogers after unlocking it from rogers I was using it for FIDO and it was working fine,but after updating(updated by Sony Ericsson PC companion ) it to V2.3.3 now the phone doesnt read my simcard and keeps rebooting ,I tried it without simcard it didnt do any rebooting ..
So, any help?
Just reflash it back to 2.1 and check first.. if it works... flash up to 2.3 and check...
while I was waiting for help I tried a friends simcard which was newer (than mine ,mine is 3 yrs old) and it worked will ,so I bought another new simcard and phone read it and working fine for past 2 hrs ,I will post if it starts acting again .
Thanks for ur time
Hello there,
i have a smartphone vodafone 890n and recently after of an official update of the stock rom my phone keeps rebooting at the system recovery screen...the only thing that i can do is to get it only in fastboot mode..
I did a hard reset aswell but there is no changes on it,everytime that i power it on boots into the system recovery mode...
even the sdcard doesnt work...
any change to fix it? my phone has no root,was in the original state!
OTA update failed -> vodafone 890n bricked
Hello Filippos86,
judging by your nickname, I guess it was the Greek version of the vodafone android (4.4.265.21.T3.141007.KTU84P.VF.GR). I got the same problem. After I have agreed to an over-the-air update (which was annoyingly popping up for a month or so) the phone got bricked the way you describe. By the way the update has not applied due to some permission errors, as the messages were stating.
Did you manage to have it fixed somehow? Did you take it to a vodafone shop? I am abroad for the moment so I don't have this option.
Thanks in advance
P.S. A friend of mine has an updated version (4.4.317.16.T3.150915.KTU84P.VF.GR) installed. He is a bit older and he could not understand what I was talking about. Obviously updated without realizing, but it works for him. Theoretically that is the version that I should have had after the update.
Hi
I need a Greek rom too.
The vodafone stores want 18 euro to flash a rom.
I want to do it for free
Please if you find a Greek rom let me know.
Have you find a greek rom?Please help me...
Dear community,
when I updated my dual sim phone H818p (AME region) via OTA to MM - version v20c, I realized that phone calls and SMS messaging do not work after the phone is encrypted. When trying to take or receive a call no connection is established and the phone app gets stuck. Additionally SIM2 does not connect automatically to the network anymore. Interestingly, internet via phone providers still works on both SIMs. This phenomenon is reversible, in unencrypted mode everything works flawlessly. Since I need encryption for use as company phone I have a real problem here.
I meanwhile also tried to flash the new version v20d which was recently released in Europe, but encountered the same bug with this ROM. Also resetting the phone to factory settings or flashing the ROM in refurbish mode with full memory wipe did not change a thing.
LG support (I have to use Middle East because of the phone region AME) is not very helpful. They only offer help if I send the phone in and do not comment on the issue itself.
In case anyone has similar issues with MM on the H818p (or other phones of the LG G4 family), please let me know, especially if you have found a fix to this problem.
Back to Lollipop
Since nothing worked to solve my problem with any MM version of the H818p stock software, I wnet back to Lollipop via LGUP - v10l. Very disappointing that LG apparently distributes software via OTA which has such serious flaws.
Update: I am back to Android 6 via OTA. Via another entry I learned that the bug disappears, when deactivating the SIM-lock and restarting the phone. Now phone calls and SMS work normal again also while the phone is encrypted.
Sent from my LG-H818 using XDA-Developers mobile app
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Shan1122 said:
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Click to expand...
Click to collapse
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
last gspian said:
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
Click to expand...
Click to collapse
hey, sorry for late reply. Thank you for your answer. I got solution but as you said, with no Radio, I cannot make calls. my imei shows only 0-17. I think my imei totally erased. my methode was to debrick with file H90021w and then flash with H90021w.dz file. I convert kdz file to dz file by using LG_Firmware_Extract_v1.2.6.1. these files are available on internet. I got my phone back to life but without network. Phone is booting with AT&T logo and working fine other then network issue.
can anyone help me with network issue now?