Related
Thx for your support help and patience to me, kind of new in this stuff, here is my question and I hope someone with absolutly real experience can answer.
Here is my reality, I have an Atrix with the new OTA update gingerbread, no UL BL, no root, no mod, clean...Can I still unlock the bootloader with the2dcourt guide in briefMobile? or I am stuck in the world of no mod forever? This is because I am tired of searching. someone guy s say you can, other say can´t (BriefMobile for example)...I really apreciate the help and a little guide just the names of treats or files I would search
I'm in the same boat, was waiting for the official update before making any mods, and I have to say, after a couple of hours on here this morning I'm a bit confused.
I got root fine (brief mobile's is solid for that) but now I'm trying to figure out the BL. Some posts say the OTA will hard brick if an SBF is flashed, others point to guides that use the SBF flash...
You can still unlock the BL with pudding and install CWM to flash custom rome. Use the preinstall method to root or use a pre-rooted custom rom.
DO NOT try to flash back to a stock froyo build or you will hard brick.
Incognitum said:
I'm in the same boat, was waiting for the official update before making any mods, and I have to say, after a couple of hours on here this morning I'm a bit confused.
I got root fine (brief mobile's is solid for that) but now I'm trying to figure out the BL. Some posts say the OTA will hard brick if an SBF is flashed, others point to guides that use the SBF flash...
Click to expand...
Click to collapse
You will only hard brick with the OTA if you attempt to flash back to 4.1.83 or earlier stock builds. You can use the fruity cake builds (as they have pudding in them) to go back if you had to.
From here on out you have to use pudding to unlock the boot loader to enable custom rom flashing. Just follow the pudding thread for more info on that.
You can't flash an older SBF file, that will cause you to brick. The SBF files you should avoid are pretty much all of them except Gingerbread, Unlock, and Radio SBF's.
You can unlock your device even though you've updated. But you're stuck with that bootloader forever, but you can always downgrade with a fruit cake I believe.
It all seems confusing at first, but you'll get the hang of it!
Sinful Animosity said:
It all seems confusing at first, but you'll get the hang of it!
Click to expand...
Click to collapse
Thanks for the vote of confidence! I had run several custom roms on my G1, but much less of that experience is proving to be helpful than I had hoped.
Thanks everyone for your speedy replies, I'll go give pudding a shot after breakfast.
if i flash pudding, just the unlock part and then fastboot the unlock....will i have to load a rom, or will gingerbread 2.34 still be there?
Okay, so the official pudding thread recommends beginners follow Brief Mobile's BL unlocking guide. I did, and got the message "oem unlock is not implemented". However, the 1st step in the guide is "If you’re on Gingerbread, skip to step 13". I am on GB from the OTA, but the guide was published a month ago, before the OTA update.
I'm guessing they said that because at the time it was published, you would need to have already done those steps to be on GB, so I may need to go back and follow through all the steps I skipped the first time. But if they had GB users skip steps because they would be harmful to GB phones, then that would be bad... Advice?
Incognitum said:
Okay, so the official pudding thread recommends beginners follow Brief Mobile's BL unlocking guide. I did, and got the message "oem unlock is not implemented". However, the 1st step in the guide is "If you’re on Gingerbread, skip to step 13". I am on GB from the OTA, but the guide was published a month ago, before the OTA update.
I'm guessing they said that because at the time it was published, you would need to have already done those steps to be on GB, so I may need to go back and follow through all the steps I skipped the first time. But if they had GB users skip steps because they would be harmful to GB phones, then that would be bad... Advice?
Click to expand...
Click to collapse
Go through the whole thing. If you soft brick, just run fastboot oem unlock again.
Thx for the help and quick response everybody, I will try to put all the step together and get the ULBL, xda always there indeed
fanhtc2 said:
Thx for the help and quick response everybody, I will try to put all the step together and get the ULBL, xda always there indeed
Click to expand...
Click to collapse
Thanks for opening this thread. I was gonna ask the same thing . Now I know what to do...I did OTA as well. Awesome that I can still unlock the bootloader.
Sent from my MB860 using XDA App
Step by step ULBL, Root for OTA GB
**I've been getting PMs for clarification: I didn't do a single mod to my phone before this morning. Stock ATT/Moto Atrix, installed stock ATT/Moto OTA GB update yesterday. Following these steps I am now BLUL and rooted.**
So here are all the steps needed to get a stock, OTA Gingerbread Atrix Unlocked and rooted:
1. Follow Brief Mobile's BL unlock guide here.
Things I found out that you may like to know:
-You will need to complete all steps *even the ones the guide says to skip*.
-When you enter your device unlock code, it is case sensitive; use caps-lock.
-The most recent SBF flash is in the XDA IHOP pudding thread, use this instead of the older file linked to in the Brief Mobile guide.
-When you are done, reboot will take a *long* time; just stay calm.
Edit: After 30 min on the dual core screen with the "unlocked" in the corner I pulled the battery... after reboot everything seems fine.
2. Follow Brief Mobile's guide to root here.
Thanks to brief mobile, and to the xda folks who held my hand through this whole thing the first time
Incognitum said:
So here are all the steps needed to get a stock, OTA Gingerbread Atrix Unlocked and rooted:
1. Follow Brief Mobile's BL unlock guide here.
Things I found out that you may like to know:
-You will need to complete all steps *even the ones the guide says to skip*.
-When you enter your device unlock code, it is case sensitive; use caps-lock.
-The most recent SBF flash is in the XDA IHOP pudding thread, use this instead of the older file linked to in the Brief Mobile guide.
-When you are done, reboot will take a *long* time; just stay calm.
2. Follow Brief Mobile's guide to root here.
Thanks to brief mobile, and to the xda folks who held my hand through this whole thing the first time
Click to expand...
Click to collapse
i love you. (no homo..not that theres anyway wrong with that)....THANKS!
defnow said:
i love you. (no homo..not that theres anyway wrong with that)....THANKS!
Click to expand...
Click to collapse
Hey, I appreciate it, and I'm glad to help! But honestly, I stopped at each step and asked the experts what to do, and then just wrote down in one post everything they told me.
I'm glad it's saving time for those coming behind me, but the real thanks belongs to the guys who helped me through it this morning; thanks again guys!
1)can some one give me a link to the most easiest and current way to root? ((Ive looked every where and im not even sure what i am to look for)) Also i am fully updated.
2)after i root,,,can i keep the phone basically the way it is meaning stock and sense?really just want to root as to get rid of all the bloatware and possibly over clock it.
3)Is there away to back up the phone pre-root in case i dont like root and wish to return to stock?
Any help in these matters would be greatly appreciated.
So, here's my $0.02 worth:
1) The easiest is not the best. If you want to root your phone, you need to learn how to use ADB. It's not difficult. You will need it at some point in the future. Here's a link to root your Thunderbolt > http://forum.xda-developers.com/showthread.php?t=996616
Here's a noob's guide to ADB >http://forum.xda-developers.com/showthread.php?t=532719
2) Yes you can.
3) I'm not sure, but here is a link that will return your phone to stock > http://forum.xda-developers.com/showthread.php?t=1009423
Plus one on learning adb its way easier than youd think. i always tried to use the one click methods and whatnot but i finally had to in adb and it was way easier. no worry about something wrong with the auto root. also try mybackup app from the market. i used it to backup everything initially then use titanium bacckup after you root since its way better
Advice on rooting flashing Thunderbolt?
Hi all,
I am so frustrated With my Moto atrix 4g and the fact that it has a locked boot loader with the new 2.3.4 stock rom....I have a real simple question;
If I obtain a Thunderbolt, does Verizon force HTC to keep anything locked or make the Thunderbolt difficult to root, unlock boot loader and ultimately flash non-stock roms from XDA ?
If it is like past HTC phones then it should be a rom flasher's dream, correct? It is able to be unlocked and i can flash roms from this wonderful forum?
Please advise....much appreciated.
maddie01 said:
Hi all,
I am so frustrated With my Moto atrix 4g and the fact that it has a locked boot loader with the new 2.3.4 stock rom....I have a real simple question;
If I obtain a Thunderbolt, does Verizon force HTC to keep anything locked or make the Thunderbolt difficult to root, unlock boot loader and ultimately flash non-stock roms from XDA ?
If it is like past HTC phones then it should be a rom flasher's dream, correct? It is able to be unlocked and i can flash roms from this wonderful forum?
Please advise....much appreciated.
Click to expand...
Click to collapse
Bro, really, take just 2 minutes to look around! There's a root guide right at the top of the dev forum!
To the OP: learning ADB and some basic Linux commands will become more useful than you know. Like quickly and easily checking an md5 without some stupid app or a computer. Plus, jcase is very easy to find and very helpful if there's a problem. I really can't endorse doing it the jcase way enough.
***LOCKED*** On Bootloader
Hello All,
First of all thanks for the awesome easy guide !!
This is the first time I am rooting my HTC Tbolt and have had an issue to start with.
Used the instructions in the link below:
http://forum.xda-developers.com/showthread.php?t=1401959
After I download the 2.11.605.5 downgrade zip, I rename it, put in on the SD Card and go to HBOOT and it installs the downgrade just fine.
But at the end of this process, when I try to get the MR4 Radio onto the SD Card and install it, it simply does not happen. HBoot checks for the file, finds it, but nothing happens. I have renamed in properly and followed instructions to the dot.
I also noticed a ***LOCKED*** right on top of the screen and I think this could be an issue.
Can I go ahead and proceed with the Revolutionary Root Technique ? Would this be possible at this point ?
Is there anyway I can get Flash the MR4 Radio before I actually root ?
Also, would I be able to flash the MR4 Radio onto my device after Rooting ?
Any help is much appreciated !
Thanks in advance !
Cheers !
I want to thank everyone who has given great information here as my last two phones this place has been invaluable place of information.
I am now trying to be more "carefull" for a mistake I made. I ended up hard bricking a phone with the dreaded Failed to boot 0X1000. I have rooted phones before and understand the process enough to get by.
However I am back at square one I was months ago when I bricked my phone (since have gotten a new atrix), Im ready to try this again. I have done ALOT of reading but to be honest there seems to be do this and do thats than people in the world. I dont want to make the same mistake again.
Trying to find "the way" seems to be at issue. Ive seen everything from avoid RSD to using it to things not addressing as if the brick issue even happened. I feel like theres no path to follow. Im wondering how many others feel this way too who are at the crossroads of doing it.
My phone is rooted, and has Android 2.3.4 and System 4.5.91.MB860.ATT.en.US if that help to point me in the right direction.
Thank you!
You need to go to the IHOP thread, I believe it is stickied, and download only the unlock sbf. You will flash that with RSD and then follow the unlocking directions.. I.e. boot to fastboot, then issue the command "fastboot oem unlock" and follow the instructions on screen. Once done, you will be unlocked. You can then flash recovery via fastboot. You are then free to flash ROMs.
The only reason to ever have to flash an SBF after this is for warranty reasons. However, DO NOT flash a froyo one. Only flash gingerbread based ones or you will hard brick again.
Any questions?
Sent from my MB860 using xda premium
Yes if you follow the instructions in the IHOP thread you shouldn't have a problem:
http://forum.xda-developers.com/showthread.php?t=1136261&highlight=international+house+of+pudding
Here is a useful step-by-step guide to unlocking bootloader:
http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
I personally would use the pudding file over the unlock file linked in the Briefmobile walkthrough, i'm sure they are the same but i know for a fact the pudding file works. This at least gives you the step-by-step procedure you are wanting.
Here's a video as well:http://www.youtube.com/watch?v=K4Bf9QIZsRI
I was pretty new to all this when i unlocked my atrix and didn't have any issues, just make sure you follow the instructions properly. Also as d3athsd00r stated try to avoid flashing SBF files via RSD after your bootloader is unlocked, the safest way to flash stuff is via CWM recovery.
Hi guys,
Just now got a new Atrix 4G off Amazon. It's an AT&T unlocked one. I am totally confused with all the processes posted here about unlocking the boot loader and stuff. I used to be a Defy user, but rooting and installing ROMs in Defy were a bit simpler than this.
Model - MB860
System - 4.5.141.MB860.ATT.en.US
Android version - 2.3.6
Kernel - 2.6.32.9
I want to flash either MIUI or Cyanogenmod. Should I unlock the bootloader first or root first. Can anybody help me out, pointing the right links? I couldn't find any guide for 2.3.6. and I don't want to brick my device.
Thanks a ton in advance
Wolvish
Whenever getting my Atrix replaced by Best Buy Mobile, I find these steps easier to follow in lesser words:
1. download ROM of choice and place it on the internal memory card
2. use automatic boot loader script
3. flash Romracer's recovery via command prompt
4. flash ROM
5. profit!
It's just easier to do this vs. rooting the phone/stock ROM first, finding that install-recovery.sh crap, and then doing the process to unlock the bootloader/flashing custom ROMs.
Sent from my MB860 using xda app-developers app
Read the threads you think don't cover 2.3.6. They have recent comments so you should assume people commenting might be on 2.3.6. I was on the same version as you and I'm unlocked and running CM10. The titles of the methods aren't updated but they still work (some of them) for yours. The threads god into amazing detail about how you do it, but make sure you read the comments too because those are more up to date than the original post. And if you say it's unlocked already then why would you unlock it again? If you boot up your phone and it says unlocked in the upper right corner when the motorola symbol is up then you are past the hard part. After that just get a custom recovery (Romracers) and flash your ROM
TotalBS said:
Read the threads you think don't cover 2.3.6. They have recent comments so you should assume people commenting might be on 2.3.6. I was on the same version as you and I'm unlocked and running CM10. The titles of the methods aren't updated but they still work (some of them) for yours. The threads god into amazing detail about how you do it, but make sure you read the comments too because those are more up to date than the original post. And if you say it's unlocked already then why would you unlock it again? If you boot up your phone and it says unlocked in the upper right corner when the motorola symbol is up then you are past the hard part. After that just get a custom recovery (Romracers) and flash your ROM
Click to expand...
Click to collapse
It does not show 'unlocked' during boot up. It's unlocked from AT&T (working with my SIM card). Isn't that different from a unlocked bootloader? So I should do that pudding thing next? BTW what is automatic boot loader script?
I read that downgrading from 4.5.141 is causing hardbrick, that's why I'm scared..
Deggy said:
1. download ROM of choice and place it on the internal memory card
2. use automatic boot loader script
3. flash Romracer's recovery via command prompt
4. flash ROM
5. profit!
It's just easier to do this vs. rooting the phone/stock ROM first, finding that install-recovery.sh crap, and then doing the process to unlock the bootloader/flashing custom ROMs.
Click to expand...
Click to collapse
Can I do this for any ROM? I'm pretty much satisfied with MIUI, not going to try anything else.
Yes any ROM. Read the sticky in the Atrix general forum. The noob guide one.
Sent from my MB860 using xda app-developers app
WolVish said:
It does not show 'unlocked' during boot up. It's unlocked from AT&T (working with my SIM card). Isn't that different from a unlocked bootloader?
Click to expand...
Click to collapse
Yes, two completely different things.
AT&T has absolutely nothing to do with your bootloader. You need to deal with that yourself. And yes, you need pudding for that.
Can I use this method instead?
http://wiki.cyanogenmod.com/wiki/Motorola_Atrix_4G:_Full_Update_Guide
It's the same exact thing.
Hi, I see many people have issues rooting their hox+ because there is no simple way of rooting.
Did I miss anything? is there an easy way of rooting? such as in the note 1 with odin (to those who know this).
i don't want to brick my phone... so i'd be happy to find a direction to a easy root guide with a high success rate
Just unlock at htcdev.com and fastboot flash the TWRP recovery. Put the SuperSU package on your sdcard first. Flash it once youhave TWRP installed. Like me I think the issues arise with factory resets. Dont do one from in recovery.
Sent from my HTC One X+ using xda premium
Unlock issue
Hi,
did you recognize that the weather is not shown in the lockscreen after the unlock?
That is the case for me and I do not find how to change that.
Thanks in advance!
Best regards!