Related
Hi guys,
I got my orange samsung galaxy s2 less than a week. Yesterday after rooting, flashing villianrom, i like an idiot, installed Clearglass 1.6 Theme zip via CWM. After rebooting, the phone has now gone into a boot loop. But since i had a nandroid backup (NOT A ZIP FILE!), i thought i'll simply restore...but i can't! The sdcard won't mount. So then i found THIS THREAD.
After following the instructions, i still can't mount the SD Card, yet it's fine in windows 7.
I also thought i'd try to use the ODIN method to reflash my stock fw, but i can't find the correct kernel version . FYI, i'm from uk and the details of my phone are below:-
MODEL: GT-I9100P
ANDROID VERSION: 2.3.4
BASEBAND VERSION: I9100PBVKI2
KERNEL: [email protected] #2
BUILD NO: GINGERBREAD.BVKI3
PLEASE PLEASE HELP ME! I can't be without my phone
Not sure what you are asking .
Firmware is not kernel whatever your correct firmware is that includes the kernel .
You have a 1900P whatever the P is .
Find the firmware not the kernel here .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Alternative
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Still problems use usb jig to set rom counter to zero .
Return to service centre .
jje
Thanks for your fast reply JJEgan. Could you please tell me which stock fw/rom i need to download as the only one that looks close to mine (KI3) is a poland one and i'm in UK.
wowandroid said:
Thanks for your fast reply JJEgan. Could you please tell me which stock fw/rom i need to download as the only one that looks close to mine (KI3) is a poland one and i'm in UK.
Click to expand...
Click to collapse
No idea what your firmware is as you have fl;ashed it .
Based on OP KI3
Then use KI4 CPW UK firmware is what i would do to get back to a working phone ,
CPW (UK): http://www.multiupload.com/QROGHPRZVK
jje
Many thanks for showing me the correct version. I wasn't too sure as i didn't want to mess up the phone permanently. So i simply follow the ODIN boot loop guide?
The way it looks to me is that CWM/Phone is corrupted as i've tried everything - mount/format/unmount/re-mount sd, but it won't detect.
OH BTW! Can you please clarify something for me. I thought that since my orange stock rom said "KI3", i must always get a "KI3"....have i got that wrong? if so how can a KI4 work on a KI3 and why is it not necessary to stick with KI3?
Hey there wowandroid, the KI* is, in my humble opinion just a revision number, higher could mean better reliability in terms of signal and perhaps even battery drain
Sent from my GT-I9100 using XDA App
thanks AJ. It's just that my i9100 is P model (i9100P) and has NFC capabilities. I've managed to flash the phone back with the ki4 rom, so big thank you to JJEgan. I just thought that because i have a p model, i might end up removing features once i flash with a ki4.
Anyway, now that i've got it working, can i go ahead and use odin to flash villianrom/checkrom back again?
wowandroid said:
Hi guys,
I got my orange samsung galaxy s2 less than a week. Yesterday after rooting, flashing villianrom, i like an idiot, installed Clearglass 1.6 Theme zip via CWM. After rebooting, the phone has now gone into a boot loop. But since i had a nandroid backup (NOT A ZIP FILE!), i thought i'll simply restore...but i can't! The sdcard won't mount. So then i found THIS THREAD.
After following the instructions, i still can't mount the SD Card, yet it's fine in windows 7.
I also thought i'd try to use the ODIN method to reflash my stock fw, but i can't find the correct kernel version . FYI, i'm from uk and the details of my phone are below:-
MODEL: GT-I9100P
ANDROID VERSION: 2.3.4
BASEBAND VERSION: I9100PBVKI2
KERNEL: [email protected] #2
BUILD NO: GINGERBREAD.BVKI3
PLEASE PLEASE HELP ME! I can't be without my phone
Click to expand...
Click to collapse
Should help you http://forum.xda-developers.com/showthread.php?t=1108499
hi checkrom, nice way of upping ur post count, lol. if you hadn't noticed, i have already managed to get the phone working...i now want to know if its safe to reflash villian, since i've lost CWM.
wowandroid said:
hi checkrom, nice way of upping ur post count, lol. if you hadn't noticed, i have already managed to get the phone working...i now want to know if its safe to reflash villian, since i've lost CWM.
Click to expand...
Click to collapse
Ok sure!
Best would be just flash a suitable CF Root
And then u will get CWM after that baam install Villan
(LOL 5 min wate took me so long)
cheers mate. I assume from your nick on forum that you've got checkrom? If so, could you tell me how you get a great looking theme installed after checkrom has been flashed? The last time i tried it, i messed up and none of the kitchen apps themes ever changed the looks (just boring samsung looks)
wowandroid said:
cheers mate. I assume from your nick on forum that you've got checkrom? If so, could you tell me how you get a great looking theme installed after checkrom has been flashed? The last time i tried it, i messed up and none of the kitchen apps themes ever changed the looks (just boring samsung looks)
Click to expand...
Click to collapse
checkrom is compactable with every Theme out there if its built for the latest XWKK5 version which checkrom is on!
So first
1)Install ROM
2)Use there Kitchen Download only any one of the themes, and hit apply and then install (Obviously)
OR
You can Download manually from the Forums any theme or any thing for stock XWKK5
3)After a theme install u will reboot.
4)Then use there Kitchen to flash any mods etc u want
Personally i use this via Kitchen http://forum.xda-developers.com/showthread.php?t=1310527
thanks checkrom. I don't suppose we can chat on skype/msn/yahoo? I just need some help, and could do with instant answers if i get stuck. If you can, pls PM me.
Thank You
wowandroid said:
thanks checkrom. I don't suppose we can chat on skype/msn/yahoo? I just need some help, and could do with instant answers if i get stuck. If you can, pls PM me.
Thank You
Click to expand...
Click to collapse
just post here if u get suck i am available for an hour haha
thanks...the problem is that i'm fixing a DSi for the kids...i'm going to be at least an hour or two.
wowandroid said:
thanks...the problem is that i'm fixing a DSi for the kids...i'm going to be at least an hour or two.
Click to expand...
Click to collapse
Just pm me i will reply asap i gt the pm
thats kool, thanks!
wowandroid said:
thats kool, thanks!
Click to expand...
Click to collapse
My pleasure
hi guys,
i'm about to get started with the update. couple of questions though:-
1. What kernel do you recommend? I need a kernel which gives it the longest battery life if possible.
2. What theme do you recommend? I need a theme which is good eyecandy, but isn't too bloated. Something like this for the villianrom:- http://forum.xda-developers.com/showthread.php?t=1229723
3. Is there a rom posted that has already been customised and tweaked with popular kernels/themes? Saves me messing around.
wowandroid said:
hi guys,
i'm about to get started with the update. couple of questions though:-
3. Is there a rom posted that has already been customised and tweaked with popular kernels/themes? Saves me messing around.
Click to expand...
Click to collapse
Yep look in development section .
jje
Hi everyone ^^
so this is not my first time here i tried 2 root my galaxy 19100G be4 but it took me a trip 2 the service center now i want 2 know what to use and how 2 use it plZ
Android version
2.3.6
Baseband version
19100GDZKK1
kernal version
2.6.35.7
[email protected] #2
Build number
GINGERBREAD.JPKK1
So i asked a lot and led 2 this site
http://software2tech.com/2011/12/19/...g-dzkj2-2-3-6/
on how to root my gti900g but its says for DZKJ2 and i dont know whats that or even if i have it so help a brother out
Cobra2142 said:
Hi everyone ^^
so this is not my first time here i tried 2 root my galaxy 19100G be4 but it took me a trip 2 the service center now i want 2 know what to use and how 2 use it plZ
Android version
2.3.6
Baseband version
19100GDZKK1
kernal version
2.6.35.7
[email protected] #2
Build number
GINGERBREAD.JPKK1
So i asked a lot and led 2 this site on how to root my gti900g but its says for DZKJ2 and i dont know whats that or even if i have it so help a brother out
Click to expand...
Click to collapse
Note, your phone is a i9100G so almost everything on this forum wont work on your phone.
The easiest way to root would be to flash this kernel, and if you want a custom rom, this rom.
They are the only custom kernel/rom for the i9100G
So just download it and flash it It wont stuck ? cuz it stucked last time on the start up screen ?
And bare with me cuz we all start at a point when i use the odin what do use pda or csc phone or bootloader ?
Cobra2142 said:
So just download it and flash it It wont stuck ? cuz it stucked last time on the start up screen ?
And bare with me cuz we all start at a point when i use the odin what do use pda or csc phone or bootloader ?
Click to expand...
Click to collapse
The flashing guide in this thread is still valid, just not the firmware downloads.
mmm As i said bare huh ? Ur talking 2 a Noob Clean slate noob so just a little answer all i need dont give me links i downloaded the kernel its nt tar it read file Type of file :File
And do i need a stock kernel ? where do get one with my firmware ?
Cobra2142 said:
mmm As i said bare huh ? Ur talking 2 a Noob Clean slate noob so just a little answer all i need dont give me links i downloaded the kernel its nt tar it read file Type of file :File
And do i need a stock kernel ? where do get one with my firmware ?
Click to expand...
Click to collapse
If you want to *just* root and dont want to flash a custom kernel, this thread has a full guide
Im sorry, im not going to type out the info in the linked thread again.. its very easy to follow.
If you want to flash the kernel;
1) Download the file, it should be a .tar
2) download odin
3) download and install drivers (if you have kies and drivers installed kill kies from task manager)
4) put phone into download mode (power off, press+hold home+voldown then press power)
5) open odin
6) Connect the USB cable and wait for the ID:COM section to turn yellow#
7) put kernel in the PDA box
8) hit flash
Many many thanks brother ive just rooted it and i hope u put this method in the forums for guys like me lol
And just a last Q what do i use roms and custom kernel for ?
Cobra2142 said:
Many many thanks brother ive just rooted it and i hope u put this method in the forums for guys like me lol
And just a last Q what do i use roms and custom kernel for ?
Click to expand...
Click to collapse
Custom kernels add: CWM recovery, flash zips, nandroid full phone backups, any other features in the kernel.
Custom roms: Any mods/themes/etc in the rom, read the two threads and see if you want any of the features.
could u tell me what kernel did u use to root ur mobile
Thx Alot for help
eldode said:
could u tell me what kernel did u use to root ur mobile
Thx Alot for help
Click to expand...
Click to collapse
Use an insecure kernel here http://forum.xda-developers.com/showthread.php?t=1103399, have a look at your kernel version in settings, and then find the matching version in the thread.
CANOT FINE MY KERNEL IN THIS SITE
my S2 info. are
Android Version :2.3.6
BaseBand Version : I9100GDZKK1
kernel Version : 2.6.35.7 [email protected] #2
Build number : GINGERBREAD.jpkk1
can u tell me what root can use
eldode said:
CANOT FINE MY KERNEL IN THIS SITE
my S2 info. are
Android Version :2.3.6
BaseBand Version : I9100GDZKK1
kernel Version : 2.6.35.7 [email protected] #2
Build number : GINGERBREAD.jpkk1
can u tell me what root can use
Click to expand...
Click to collapse
No idea what your phone is from those figures .
IS IT a i9100 G GEE as in not the standard international i9100 model
jje
eldode said:
CANOT FINE MY KERNEL IN THIS SITE
my S2 info. are
Android Version :2.3.6
BaseBand Version : I9100GDZKK1
kernel Version : 2.6.35.7 [email protected] #2
Build number : GINGERBREAD.jpkk1
can u tell me what root can use
Click to expand...
Click to collapse
JJEgan said:
No idea what your phone is from those figures .
IS IT a i9100 G GEE as in not the standard international i9100 model
jje
Click to expand...
Click to collapse
It is a G model. (GT-I9100G) See here for more info near the bottom of the thread. (which, incidentally, I found with a simple google search for "jpkk1 root". It was the first result)
ctomgee said:
It is a G model. (GT-I9100G) See here for more info near the bottom of the thread. (which, incidentally, I found with a simple google search for "jpkk1 root". It was the first result)
Click to expand...
Click to collapse
thanks for your help
but iam a new Android user and i want a step by step to do it
eldode said:
thanks for your help
but iam a new Android user and i want a step by step to do it
Click to expand...
Click to collapse
Google is your friend. Step to step here:
http://forum.lowyat.net/topic/2068824
eldode said:
thanks for your help
but iam a new Android user and i want a step by step to do it
Click to expand...
Click to collapse
Did you even click the link? There's a link to a step by step. How much do you need spoon fed to you?
Sent from my GT-I9100 using XDA App
plz help me iam new in andriod
hi i have galaxy note with ics i want to put custom android like CyanogenMod or miui what i need to install it on my mob and how i know the rigth kernel for me plz help i really want to try it
eldode said:
hi i have galaxy note with ics i want to put custom android like CyanogenMod or miui what i need to install it on my mob and how i know the rigth kernel for me plz help i really want to try it
Click to expand...
Click to collapse
If you have a Note, why are you looking in the Galaxy SII forum for ROMs? Go to the Note forum. But make sure you go to the specific Note forum for your particular model.
Hello xda-devs,
I rooted my sgs2 a while back , but now with the official release of ICS on my phone , I'd like to update to it.
My questions are: Can I do it without unrooting the phone? If not , how can I unroot my phone along with most of the apps I got that only work on rooted devices?
Thanks in advance
JustGandalf said:
Hello xda-devs,
I rooted my sgs2 a while back , but now with the official release of ICS on my phone , I'd like to update to it.
My questions are: Can I do it without unrooting the phone? If not , how can I unroot my phone along with most of the apps I got that only work on rooted devices?
Thanks in advance
Click to expand...
Click to collapse
are you still running the stock kernel?
Jokesy said:
are you still running the stock kernel?
Click to expand...
Click to collapse
Thanks for the quick response.
It says :
2.6.35.7
[email protected] #k2-21
So I'm guessing ... not?
If you can flash your stock kernel, then you are good to go.
If not, then you can flash the same firmware via Odin
Jokesy said:
If you can flash your stock kernel, then you are good to go.
If not, then you can flash the same firmware via Odin
Click to expand...
Click to collapse
I know this might be a lot to ask , but could you tell me how/direct me to a guide on how to do it? My build number is XWKI4.
I really have little to no experience doing this kind of stuff
JustGandalf said:
I know this might be a lot to ask , but could you tell me how/direct me to a guide on how to do it? My build number is XWKI4.
I really have little to no experience doing this kind of stuff
Click to expand...
Click to collapse
1. Download the latest firmware for your phone and country from Sammobile
2. Backup your important data (Messages, Contacts etc)
3. Read the flashing Guide here
4. Extract the zip file you downloaded.
5. Flash the firmware via Odin
done.
When you are done, let me know.
Also, if you have any questions, do let me know.
Jokesy said:
1. Download the latest firmware for your phone and country from Sammobile
2. Backup your important data (Messages, Contacts etc)
3. Read the flashing Guide here
4. Extract the zip file you downloaded.
5. Flash the firmware via Odin
done.
When you are done, let me know.
Also, if you have any questions, do let me know.
Click to expand...
Click to collapse
Worked like a charm , thank you very much
But I still have a question. Can I still use Apps like AdFree now ? Or do I have to root it again?
JustGandalf said:
Worked like a charm , thank you very much
But I still have a question. Can I still use Apps like AdFree now ? Or do I have to root it again?
Click to expand...
Click to collapse
You have to Root again. Actually rooting is much easier in ICS.
First, you need to post your Firmware details: Goto Settings > About phone, and post everything you see.
Jokesy said:
You have to Root again. Actually rooting is much easier in ICS.
First, you need to post your Firmware details: Goto Settings > About phone, and post everything you see.
Click to expand...
Click to collapse
Baseband version: i9100XXLPX
Kernel version : 3.0.15-I9100XWLPG-CL619441
[email protected] #3
Build number: IML74K.XWLPG
Also , I'm looking at installing speedmod , already downloaded it and I'm about to flash it via Odin.
JustGandalf said:
Baseband version: i9100XXLPX
Kernel version : 3.0.15-I9100XWLPG-CL619441
[email protected] #3
Build number: IML74K.XWLPG
Also , I'm looking at installing speedmod , already downloaded it and I'm about to flash it via Odin.
Click to expand...
Click to collapse
Good. You can flash SpeedMod kernel. Make sure you downloaded the ICS version.
Jokesy said:
Good. You can flash SpeedMod kernel. Make sure you downloaded the ICS version.
Click to expand...
Click to collapse
Thank you very much for your help , I couldn't have done it without you
Hi guys. I have been a frequent visitor and learned alot about android and features. I am ready to root my galaxy s2 i9100
My details are :
Android version: 4.04
Model number gt-i9100
Baseband version: i9100XXLQ6
Kernal version: I9100xxlbq-cl911584
build number: IMM76D.XXLQB
I downloaded
ODIN 1.85
CF-Root-SGS2_XX_XEO_LQB-v5.6-CWM5
I am not seeing the original kernal file up for download for my version. What else do I need for my root? Is there any advice such as best method and such. Thank you kindly everyone. Mods, if I posted in the wrong section, please move my thread to the correct location.
That's all you need mate. This kernel is declared safe by Chainfire but as any 4.0.4 kernel should not be used to wipe data because of possibility of emmc cap bug rendering your phone bricked. Root with this kernel but make sure to switch to custom safe one before attempting to wipe data.
Best of luck
Sent from my GT-I9100 using Tapatalk 2
daxgirl said:
That's all you need mate. This kernel is declared safe by Chainfire but as any 4.0.4 kernel should not be used to wipe data because of possibility of emmc cap bug rendering your phone bricked. Root with this kernel but make sure to switch to custom safe one before attempting to wipe data.
Best of luck
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Which one would you recommend for wiping data? i assume by wiping data you mean unrooting. am I right?
wargrafix said:
Which one would you recommend for wiping data? i assume by wiping data you mean unrooting. am I right?
Click to expand...
Click to collapse
check here you'll find your answers http://forum.xda-developers.com/showthread.php?t=1756242
slimlo said:
check here you'll find your answers http://forum.xda-developers.com/showthread.php?t=1756242
Click to expand...
Click to collapse
Essentially flashing using a 4.04 firmware will brick the phone? or is it when I flash, it will be bad to flash using a 4.04 firmware? Sooo confused.
If anyone has the steps what I should do, please tell me. I am worried about bricking.
If I root the phone, when official JB comes out, will I be able to update?
any help guys? The thread isn't very clear what do I do if I have this kernal. Do I downgrade before rooting?
Insted of flashing that Cf root kernel with Odin or Cwm, flash Siyah 4.1.5.
www.gokhanmoral.com
Sent from my GT-I9100
The link, do I root with those? if I do, what will it change?
wargrafix said:
Hi guys. I have been a frequent visitor and learned alot about android and features. I am ready to root my galaxy s2 i9100
My details are :
Android version: 4.04
Model number gt-i9100
Baseband version: i9100XXLQ6
Kernal version: I9100xxlbq-cl911584
build number: IMM76D.XXLQB
I downloaded
ODIN 1.85
CF-Root-SGS2_XX_XEO_LQB-v5.6-CWM5
I am not seeing the original kernal file up for download for my version. What else do I need for my root? Is there any advice such as best method and such. Thank you kindly everyone. Mods, if I posted in the wrong section, please move my thread to the correct location.
Click to expand...
Click to collapse
I actually have the same HW version in my new SGS2 and I have checked with eMMC check (downloaded from Google Play) that my chip is safe from "brick bug" :laugh:
Now the question is: which kernel to choose, CF or Siyah ? I'm planning to use CyanogenMod 10 on this phone, does kernel version matter at all in this case ?
/edit:
ROM will be either original CM10 or one of the variants (like HellyBean for example)
ZDQ said:
I actually have the same HW version in my new SGS2 and I have checked with eMMC check (downloaded from Google Play) that my chip is safe from "brick bug" :laugh:
Now the question is: which kernel to choose, CF or Siyah ? I'm planning to use CyanogenMod 10 on this phone, does kernel version matter at all in this case ?
/edit:
ROM will be either original CM10 or one of the variants (like HellyBean for example)
Click to expand...
Click to collapse
If GotBrickbug app by CF said your chip is safe than it shouldn't matter what kernel you use. Safe hardware.
Personally I always prefer rooting with CF kernels that match my FW version. Then if you're still unsure about the chip... flash siyah, go to advanced (while still in recovery) > reboot recovery. Then wipe data with siyah kernel just to be on the safe side. I always keep siyah 3.5.2 (the first transisiontl ics/jb kernel) for those purposes. CM10 built in kernels are all considered safe so that's the last time you'll ever be worried about it.
Best of luck, man
Thank you very much, I ran emmc check and I have a sane chip.
if I flash with the CF LBQ, what is my next step?
wargrafix said:
Thank you very much, I ran emmc check and I have a sane chip.
if I flash with the CF LBQ, what is my next step?
Click to expand...
Click to collapse
your phone will be rooted and u can then choose to install a custom kernel like Siyah v 4.1.5 on ur phone which gives u the latest CWM recovery thro which u can install any custom rom of ur choice(meant for i9100 though) on ur phone
Thank you very much!
If my questions seemed noobish, its because I want to be very sure. It my first expensive phone.
a question though, When samsung upgrades us to JB, will I be able to update it?
wargrafix said:
Thank you very much!
If my questions seemed noobish, its because I want to be very sure. It my first expensive phone.
a question though, When samsung upgrades us to JB, will I be able to update it?
Click to expand...
Click to collapse
Samsung releases firmware in various regions and with varied carriers. So I bet that till it is officially released it will take time but when it does you will get OTA if your are on 'STOCK' ROM. but if you move away to custom rom then you will have to update manually.
Sent from my GT I-9100 with CM10 JellyBean L.O.V.E. via Tapatalk 2
So essentially I need to revert to 4.04 stock to upgrade? How do I do that?
wargrafix said:
So essentially I need to revert to 4.04 stock to upgrade? How do I do that?
Click to expand...
Click to collapse
To revert back assuming you didn't do backup before, download 4.0.4 firmware for your region on sammobile and flash it using odin.. Then to upgrade it when official update are up just hit OTA, kies, or flash it via odin the same way like you flash 4.0.4..
If you don't have idea how to flash then google it, theres plenty much tutorials out there.. hope it helps
Ohhhhhh. I get it. Flash using CF, or CM 10, use triangle app to remove warning triangle and if I need to unroot, flash with 4.04 (my region) using odin? Sound pretty simple. Am I missing any steps?
wargrafix said:
Ohhhhhh. I get it. Flash using CF, or CM 10, use triangle app to remove warning triangle and if I need to unroot, flash with 4.04 (my region) using odin? Sound pretty simple. Am I missing any steps?
Click to expand...
Click to collapse
Actually I get confused myself hehe, by "Flash using CF, or CM 10" you mean flash what? The rest are ok..
Well, let's put this simple, Flash the CF-Root for your phone then you're rooted now, if you want to flash custom rom such as cm10 then flash it (the cm10 zip file to be flashed on recovery mode and don't forget to read the cm10 instruction before & after flashing), if you want to get rid of the triangle then do it with triangle away, finally to unroot and revert to stock, just flash stock firmware via odin..
Hi everyone! I just rooted my phone and it was sooo easy.
Thank you so much. Your advice and help definitely made it much easier than I though.
Yeah, welcome to the rooted world where you can explore more with your phone
Sent from my GT-I9100
would anyone be kind enough to point me to the appropriate threads for an all-in-one guide to root and flash cwm on my i9100 so i can flash cm10.
i have spent around 2-3 hours reading lots of guides, scouting xda and using the search function but everything feels so scattered and confusing to me.
gt-i9100
android version 4.1.2
baseband i9100buls1
kernal 3.0.31 -889555
build number (not sure if you need this?)
Leoncc said:
would anyone be kind enough to point me to the appropriate threads for an all-in-one guide to root and flash cwm on my i9100 so i can flash cm10.
i have spent around 2-3 hours reading lots of guides, scouting xda and using the search function but everything feels so scattered and confusing to me.
gt-i9100
android version 4.1.2
baseband i9100buls1
kernal 3.0.31 -889555
build number (not sure if you need this?)
Click to expand...
Click to collapse
Try the 'Philz' kernel ma8, its a stock based Custom JB kernel which can be flashed from ur stock recovery to root and install latest Cwm recovery for u
Link Here ======> PHILZ Kernel
PS- the bold thing (Build number) in ur post is pretty much needed to select the right kernel
Sun90 said:
Try the 'Philz' kernel ma8, its a stock based Custom JB kernel which can be flashed from ur stock recovery to root and install latest Cwm recovery for u
Link Here ======> PHILZ Kernel
PS- the bold thing (Build number) in ur post is pretty much needed to select the right kernel
Click to expand...
Click to collapse
Oh I see now, I wasn't looking at the build number on the phone just the kernal version...
Leoncc said:
I don't understand which one to download, there is so many what bit of the kernal on my phone am I supposed to be relating too?
Click to expand...
Click to collapse
Build Number? post details of the same