Hi
I search for orginal fw .75 for sweden
Si number 1257-6087
Any who can help me? Or can I fix it with Sonys pc program?
ICS soon..
Very soon...
---
Brick your phone?
Power off your phone, hold down volume button and plug in the usb cable. Open up PCC and repair.
You can look here for the firms:
http://forum.xda-developers.com/forumdisplay.php?f=1518
I have custom rom and rooted how I update to ics when it come?
And then a app dont work on this rom I have I must have orginal to get it run :/
SGR[robin92] said:
I have custom rom and rooted how I update to ics when it come?
And then a app dont work on this rom I have I must have orginal to get it run :/
Click to expand...
Click to collapse
Unlocked bootloader?
Then you cant use PCC because its unlocked.
It will say: Detected illegal software or sort like that.
Or is it just prerooted rom?
If its released i believe 100 people will upload it so people can upload it with flashtool.
Or if you really want to upload with PCC. You need to lock your bootloader.
Everything you need to know:
http://forum.xda-developers.com/showthread.php?p=23180735#post23180735
I want a fw with right si number
SGR[robin92] said:
I want a fw with right si number
Click to expand...
Click to collapse
Sorry i cant fix that
Search or ask for it here.
Related
Here my step to root my mini pro SK17i, boot loader still same as when it buy..
When I bought it the phone is 2.3.4/4.0.2.A.0.62 and try out many ways from XDA. Yes it rooted but when I update firmware from OTA or pc... my phone back to early state that root are gone...
So I tried out many ways and found this one, try over 3 times to make sure and decide to post this guide.
A.prepare...
1.flashtool 0.7 from this post
http://forum.xda-developers.com/showthread.php?t=1351309
2.fw 4.0.2.A.0.58 .ftf you can find from xda or place..(its not hard to find)
3.root v1.5 without unlock boot loader
http://forum.xda-developers.com/showthread.php?t=1346198
...
step 1.
open flashtool then select flash ==> flash mode ==> select fw 4.0.2.A.0.58..
then check only exclude TA / FOTA / Baseband (only 3 choices) the others must not check..
then select [ok] to continue and wait for connect the SK17i
step 2.
Push your phone in to flash mode by....Turn off your phone..
Then press and hold [volume down] while you plug PC-USB, if you never install driver of flash mode the PC will install it...[please choose continue(ignore) to install, even no matter what happen]
step 3.
waiting around 5-6 minutes... untill all message said all finished..==> then disconnect the phone..
step 4.
turn on your phone..==> then set display to maximum timeout / and set develop USB debug...
step 5.
open (root v1.5) to root the phone
after phone restart....
Your phone SK17i are rooted ready and fw is 4.0.2.A.0.58..
then Backup every things while you are root user...
step 6.
OTA to 4.0.2.A.0.62 back by wifi only, don't choose other else..
Done...enjoy.
^&^'
Is it work with Live with walkman?
Ehm... isn't this the same procedure that everyone has been using for a couple of months?
Feanor88 said:
Ehm... isn't this the same procedure that everyone has been using for a couple of months?
Click to expand...
Click to collapse
Yes, it is.
To OP: OTA update can be done over 3G also, it is not a requirement to use WiFi.
Sent from my Xperia Live using xda premium
"When I bought it the phone is 2.3.4/4.0.2.A.0.62 and try out many ways from XDA. Yes it rooted but when I update firmware from OTA or pc... my phone back to early state that root are gone..."
u said that! i get from this sentence that when u bought ur device u did root without went back to the previous firmware? i mean u didn't flash the rom! did u?
obaidshera said:
"When I bought it the phone is 2.3.4/4.0.2.A.0.62 and try out many ways from XDA. Yes it rooted but when I update firmware from OTA or pc... my phone back to early state that root are gone..."
u said that! i get from this sentence that when u bought ur device u did root without went back to the previous firmware? i mean u didn't flash the rom! did u?
Click to expand...
Click to collapse
He went back to a previous firmware, because .62 is unrootable and so the devices isn't like you have bought it, because the .ftf you flash isn't the same like the one on phone before
that kind of solution excludes AZERTY HW keyborad of the SK17i ? it seems that every custom rom every is design for US HW keyboard but i dont want to lose my keyconfig anymore by switching firmware,
Any solution for french people ? plz
moussm said:
that kind of solution excludes AZERTY HW keyborad of the SK17i ? it seems that every custom rom every is design for US HW keyboard but i dont want to lose my keyconfig anymore by switching firmware,
Any solution for french people ? plz
Click to expand...
Click to collapse
Search for a french firmware ftf, maybe in development forum you could find one
Or you copy the keyprint.xml from your current rom, save it on your pc, flash a generic firmware and push the file back :good:
mihahn said:
He went back to a previous firmware, because .62 is unrootable and so the devices isn't like you have bought it, because the .ftf you flash isn't the same like the one on phone before
Click to expand...
Click to collapse
Sorry for bothering.
I was reading many texts on this forum and all over the net, and because I`m a newbie I`m still not sure if I`m right about this.
So this 4.0.2.A.0.62 firmware is not rootable unless I downgrade right ? I have an xperia ray if that makes any difference.
So the only solution for me to root the phone is to flash the phone with an older version of gingerbread right ?
Thanks in advance.
kobajagrande said:
Sorry for bothering.
I was reading many texts on this forum and all over the net, and because I`m a newbie I`m still not sure if I`m right about this.
So this 4.0.2.A.0.62 firmware is not rootable unless I downgrade right ? I have an xperia ray if that makes any difference.
So the only solution for me to root the phone is to flash the phone with an older version of gingerbread right ?
Thanks in advance.
Click to expand...
Click to collapse
Yes, you've got it. You have to downgrade to 4.0.2.A.0.42 or .58 to root
mihahn said:
Search for a french firmware ftf, maybe in development forum you could find one
Or you copy the keyprint.xml from your current rom, save it on your pc, flash a generic firmware and push the file back :good:
Click to expand...
Click to collapse
Thanks i found a frensh version of the firmware i just finish the downgrade and the root with zerg V4 the device seems to be rooted great
Is it Worth upgrading OTA on .68 ?? i'm afraid of loosing the root :S
AW: [Tutorial] Root mini pro SK17i fw4.0.2.A.0.62
moussm said:
Thanks i found a frensh version of the firmware i just finish the downgrade and the root with zerg V4 the device seems to be rooted great
Is it Worth upgrading OTA on .68 ?? i'm afraid of loosing the root :S
Click to expand...
Click to collapse
I guess there's no .68 firmware. Only .58/.62/.69/
I would update; with an ota update (via wifi) you shouldn't loose root. To be on the safe side, download the local-prop script (how to root .431), run it on your current firmware, update, see if you have root, if not run push-root-files
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
I guess there's no .68 firmware. Only .58/.62/.69/
I would update; with an ota update (via wifi) you shouldn't loose root. To be on the safe side, download the local-prop script (how to root .431), run it on your current firmware, update, see if you have root, if not run push-root-files
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
Yes .62 excuse me on firmware i told you the TA wasnt excludable i mean that maybe the firmware i had downloaded didnt include that little part of the software is that matter ? Oh, i forgot to tell you that i removed some bloatwares i heard on galaxys that it fails the OTA update its the same with SK17 ?
Sent from my SK17i using xda app-developers app
moussm said:
Thanks i found a frensh version of the firmware i just finish the downgrade and the root with zerg V4 the device seems to be rooted great
Is it Worth upgrading OTA on .68 ?? i'm afraid of loosing the root :S
Click to expand...
Click to collapse
Where did you get the frensh version? I'm looking for the azerty vertion :/
could anyone help me by telling where i could find rom 4.04 of SI 1253-8882 for my live with walkman...would be a great help.
and also wanted to know if warranty would be void if i have installed firmware of diff SI to my phone. thank you.. would be a great help.
Parkerchet said:
could anyone help me by telling where i could find rom 4.04 of SI 1253-8882 for my live with walkman...would be a great help.
and also wanted to know if warranty would be void if i have installed firmware of diff SI to my phone. thank you.. would be a great help.
Click to expand...
Click to collapse
You can find the Rom here - http://forum.xda-developers.com/showthread.php?t=1693631
But the SI number might not be same as yours. And warranty wouldn't become void for installing firmware of different SI to your phone. If you want the Rom for your SI number, update via PCC or SUS. And then u can create your own rom from that
MSTHETERROR said:
You can find the Rom here - http://forum.xda-developers.com/showthread.php?t=1693631
But the SI number might not be same as yours. And warranty wouldn't become void for installing firmware of different SI to your phone. If you want the Rom for your SI number, update via PCC or SUS. And then u can create your own rom from that
Click to expand...
Click to collapse
Thanks alot mate....!!!!! im currently using the same firmware. And do you mean i shud reinstall the firmware using sony update service. and can create the rom...??? and as u have said wont have issues with firmware of diff SI than i wudnt mind,plus i have relocked my bootloader back...so u think that wud void my warranty.. i have unrooted and relocked bootloader.. thanks
Parkerchet said:
Thanks alot mate....!!!!! im currently using the same firmware. And do you mean i shud reinstall the firmware using sony update service. and can create the rom...??? and as u have said wont have issues with firmware of diff SI than i wudnt mind,plus i have relocked my bootloader back...so u think that wud void my warranty.. i have unrooted and relocked bootloader.. thanks
Click to expand...
Click to collapse
If you want a rom you can download it from above link itself And u can flash it via flashtool without unlocking your bootloader or rooting the si number should not be a problem
Hit the thanks button if i helped
sony lww 1253-8882
MSTHETERROR said:
If you want a rom you can download it from above link itself And u can flash it via flashtool without unlocking your bootloader or rooting the si number should not be a problem
Hit the thanks button if i helped
Click to expand...
Click to collapse
if flash different ROM of different Si the warranty still will remain but you keep your si number and ro revision code for future change to original in build prop. Can you tell me what region code of the 1253-8882? ( please chck in build prop seems to like R1D or R1I etc )
Hi guys, As you all know ICS is being released, Apparently my SI no. hasn't got the update yet, I really am losing my patience and want to manually update to ICS using the French ST25i firmware.
Now, coming to my question. I want to manually Update my XU ST25i GB to ICS. I want to know how it is to be done, IN A NOOB FRIENDLY WAY .
A step by step method would really help guys. I'm aware that if I update this way, It technically isn't ROOTING. ( Right?? ) (I havent unlocked my Bootloader and I prefer to keep it that way coz of future updates from Sony) . And one more thing, If I do this, Will I be able to still get official updates from Sony? ( i.e From SUS or PCC ).
Please help a fellow member! :highfive:
kushalsv said:
Hi guys, As you all know ICS is being released, Apparently my SI no. hasn't got the update yet, I really am losing my patience and want to manually update to ICS using the French ST25i firmware.
Now, coming to my question. I want to manually Update my XU ST25i GB to ICS. I want to know how it is to be done, IN A NOOB FRIENDLY WAY .
A step by step method would really help guys. I'm aware that if I update this way, It technically isn't ROOTING. ( Right?? ) (I havent unlocked my Bootloader and I prefer to keep it that way coz of future updates from Sony) . And one more thing, If I do this, Will I be able to still get official updates from Sony? ( i.e From SUS or PCC ).
Please help a fellow member! :highfive:
Click to expand...
Click to collapse
Its not rooting. It is just flashing a new official ROM. Here is the more stable ST25a Australian ROM with full instructions
http://forum.xda-developers.com/showthread.php?t=1916419
THe french ST25i ROM is a little laggy. I own ST25i phone and I just flashed with the Australian ROM. It is just fine. Do read the instructions properly before flashing.
sayantandas said:
Its not rooting. It is just flashing a new official ROM. Here is the more stable ST25a Australian ROM with full instructions
http://forum.xda-developers.com/showthread.php?t=1916419
THe french ST25i ROM is a little laggy. I own ST25i phone and I just flashed with the Australian ROM. It is just fine. Do read the instructions properly before flashing.
Click to expand...
Click to collapse
Thanks for the reply, But there doesn't seem to be any instructions of any sort on that page. A better link/page with instructions will be helpful. Anyone?
kushalsv said:
Thanks for the reply, But there doesn't seem to be any instructions of any sort on that page. A better link/page with instructions will be helpful. Anyone?
Click to expand...
Click to collapse
Alright, download the following first,
ics firmware that u wish to flash
flashtool (google it..shouldnt be hard to find)
now switch on the debugging mode on ur phone,
start flashtool on ur pc.....select flash......select the firmware...select the required fields(u may choose to exclude baseband...or to keep user data....attaching a screenshot just in case u need it)
switch off ur phone
now connect the phone to the pc keeping the volume down key pressed-flash mode (u should see a green light on the light bar...and the flashtool will notify u)
proceed with the on screen instructions
thank if it helps!
xyge said:
Alright, download the following first,
ics firmware that u wish to flash
flashtool (google it..shouldnt be hard to find)
now switch on the debugging mode on ur phone,
start flashtool on ur pc.....select flash......select the firmware...select the required fields(u may choose to exclude baseband...or to keep user data....attaching a screenshot just in case u need it)
switch off ur phone
now connect the phone to the pc keeping the volume down key pressed-flash mode (u should see a green light on the light bar...and the flashtool will notify u)
proceed with the on screen instructions
thank if it helps!
Click to expand...
Click to collapse
Ok guys thanks for your inputs,
Last few questions. :laugh:
1. Which firmware do you suggest I flash? ( The french or Australian) for my XU?
2. After I flash, Will I still be able to receive official updates from Sony?
kushalsv said:
Ok guys thanks for your inputs,
Last few questions. :laugh:
1. Which firmware do you suggest I flash? ( The french or Australian) for my XU?
2. After I flash, Will I still be able to receive official updates from Sony?
Click to expand...
Click to collapse
Hey I tried Flashing just like you said. but i got this ERROR.
See ScreenShot
kushalsv said:
Hey I tried Flashing just like you said. but i got this ERROR.
See ScreenShot
Click to expand...
Click to collapse
install flashtool driver from /flashtool/drivers/ and select sony xperia u, p, sola and try again
kushalsv said:
Ok guys thanks for your inputs,
Last few questions. :laugh:
1. Which firmware do you suggest I flash? ( The french or Australian) for my XU?
2. After I flash, Will I still be able to receive official updates from Sony?
Click to expand...
Click to collapse
1 ->i flashed the Australian one....pretty smooth....haven't heard any complains from the ones with french firmware either..i don't think any of them should be a problem!
2-> yes you will be..provided u don't edit the build.prop too much
and yes u need to install the flashtool drivers as well.....sorry i missed that!
Hello ive run into a serious issue and have flashed a FTF of the xperia go st27i JELLYBEAN and ive lost the ability to use the internet now since the frequency is different. can anyone please post or send me the original st27A unlocked stock FTF. SuS wont even work for me anymore because of the mismatched firmware it just always says its up to date and when i try to hit repair it says theres no available firmware for my device.
i have also realized that my touchscreen is really laggy and takes several presses for it to work or to press letters in a text message.
Thankyou for your time and i hope someone can help me.
joey4187 said:
Hello ive run into a serious issue and have flashed a FTF of the xperia go st27i JELLYBEAN and ive lost the ability to use the internet now since the frequency is different. can anyone please post or send me the original st27A unlocked stock FTF. SuS wont even work for me anymore because of the mismatched firmware it just always says its up to date and when i try to hit repair it says theres no available firmware for my device.
i have also realized that my touchscreen is really laggy and takes several presses for it to work or to press letters in a text message.
Thankyou for your time and i hope someone can help me.
Click to expand...
Click to collapse
i think you can edit your "build.prop" file in "System/" with root explorer f.e to Sus recognize your phone to St25a & then repair with Sus
only you need the SI number & other from which you want to download ,
XDA.AGM said:
i think you can edit your "build.prop" file in "System/" with root explorer f.e to Sus recognize your phone to St25a & then repair with Sus
only you need the SI number & other from which you want to download ,
Click to expand...
Click to collapse
is there anyway you can give me a step by step guide on how to do this?
also do i need to be rooted ?cause i cant seem to find a way to root this new firmware
joey4187 said:
is there anyway you can give me a step by step guide on how to do this?
also do i need to be rooted ?cause i cant seem to find a way to root this new firmware
Click to expand...
Click to collapse
yes need root , anyway try to flash old frimware ( ICS ) , root & make changes in build.prop . I do not know what changes have to do exactly
but i think in this forum have a lot of info for do that , wait for other users or search , sorry mate
Edit : for flash St25i on st25a for example i think you can flash with flastool & tick "exclude Baseband" but i dont know 100% sure if all works well
Same problem here How can i edit the build prop to trick pc companion to do a repair?
joey4187 said:
Hello ive run into a serious issue and have flashed a FTF of the xperia go st27i JELLYBEAN and ive lost the ability to use the internet now since the frequency is different. can anyone please post or send me the original st27A unlocked stock FTF. SuS wont even work for me anymore because of the mismatched firmware it just always says its up to date and when i try to hit repair it says theres no available firmware for my device.
i have also realized that my touchscreen is really laggy and takes several presses for it to work or to press letters in a text message.
Thankyou for your time and i hope someone can help me.
Click to expand...
Click to collapse
Check this out my friend...
http://forum.xda-developers.com/showthread.php?p=41737343
[XGO] Jelly Bean 6.2.A.0.400 (4.1.2) FTF (Unrooted)
Maybe this can help you.
Nonetheless, I really need this ftf as well, please, to the Developers, help us thanks.
Enviado desde mi ST27a usando Tapatalk 2
Ok lets reopen this thread I need this ftf, to see if I'm able too fix a problem that appeared flashing some custom Rom in here, low (too low) volume on in calls. Dumb from my part I didn't make a backup ftf from my Stock Rom, so I want to rinstall the ftf that you can provide (The ICS luckily and specifically the U.S. Customization) using flash tool and then root to modify the build.prop (change SI numbers values), unroot and then see if, luckily (again) in able to get the PC Companion to repair by downloading the U.S. Stock Rom for the Xperia Advance. and see if the volume of in calls is fixed. Please devs, help me. Thanks
Enviado desde mi ST27a usando Tapatalk 2
Here is link to stock generic and unbranded gingerbread firmware if someone needs it.
http://d-h.st/Ug3
Edit :
here is mega link
https://mega.co.nz/#!Tk42WYpb!LrxGYccI1By_56pvqnqnwn6AiGJaRt9_6CifXRvwvx8
Mixaserbia said:
Here is link to stock generic and unbranded gingerbread firmware if someone needs it.
http://d-h.st/Ug3
Click to expand...
Click to collapse
this one .184 or .188, because file is as .188
madhpharma said:
this one .184 or .188, because file is as .188
Click to expand...
Click to collapse
Its .184 . I made mistake when naming file in my computer.Sorry
Mixaserbia said:
Its .184 . I made mistake when naming file in my computer.Sorry
Click to expand...
Click to collapse
thanks bro, i am searching for .188 ftf since a long:good:
madhpharma said:
thanks bro, i am searching for .188 ftf since a long:good:
Click to expand...
Click to collapse
When i brought phone it was .188 in it but when i created ftf file using pc companion it downloaded .184 version.i dont know why.I dont think that there is difference in those two versions.i currently have the version i uploaded and its working perfectly.:victory:
Mixaserbia said:
When i brought phone it was .188 in it but when i created ftf file using pc companion it downloaded .184 version.i dont know why.I dont think that there is difference in those two versions.i currently have the version i uploaded and its working perfectly.:victory:
Click to expand...
Click to collapse
thank u, dowloading
can you please rename to ftf instead of rom
What SI number? I tried to create a backup of my fw 188 but it failed, cause server tells me no such firmware
So I have to find any ftf for my SI 1261-9039, because now I have no backup...
On my XU with fw188 was a bug that all custom contact ringtones was ignored, so maybe is something wrong with this firmware...
My SI number is 1261-9036.I gues something was wrong with it(i mean version .188)so when i went to repair phone throught PC companion it downloaded .184.You can freely instal this firmware because it's completely free of carrier and there is no difference with that firmware that you used to have.
Mixaserbia said:
My SI number is 1261-9036.I gues something was wrong with it(i mean version .188)so when i went to repair phone throught PC companion it downloaded .184.You can freely instal this firmware because it's completely free of carrier and there is no difference with that firmware that you used to have.
Click to expand...
Click to collapse
Yes I know it will work on every phoíne, but in case of warranty claim Sony require the installed firmware to be for my SI (SI that is written under the battery).
So I really do not want to use Ginger bread at all, but I need FTF for my SI in case I will have to contact sony support in case of possible warranty claim...
Mbiba
mbiba said:
Yes I know it will work on every phoíne, but in case of warranty claim Sony require the installed firmware to be for my SI (SI that is written under the battery).
So I really do not want to use Ginger bread at all, but I need FTF for my SI in case I will have to contact sony support in case of possible warranty claim...
Mbiba
Click to expand...
Click to collapse
sony service center guys..never see what SI nos..of ur phn or firmware.....all matters is the bootloader status & Drm keys...if u r considered for warranty purposes..!
regards
kantry123
kantry123 said:
sony service center guys..never see what SI nos..of ur phn or firmware.....all matters is the bootloader status & Drm keys...if u r considered for warranty purposes..!
regards
kantry123
Click to expand...
Click to collapse
Hmm ok, but service centers in our country requires the same SI. Sony has different politics in different countries...
kantry123 said:
sony service center guys..never see what SI nos..of ur phn or firmware.....all matters is the bootloader status & Drm keys...if u r considered for warranty purposes..!
regards
kantry123
Click to expand...
Click to collapse
sir. will they be able to find out after i relock my bootloader? does the rooting status to bootloader will change? how bout DRM keys? i lost it, thanks sir.
napskin16 said:
sir. will they be able to find out after i relock my bootloader? does the rooting status to bootloader will change? how bout DRM keys? i lost it, thanks sir.
Click to expand...
Click to collapse
yup..!!
if u have already unlocked bootloader and relock it...yes sony will be able to identify that ur phone is unlocked....
if there is some probs..they gonna charge minimal charge
regards
kantry123