I've tried to unpack the boot.img from CM7 for the Galaxy Player 4.0, but I always get the message:
Android Magic not found in boot.img. Giving up.
Does anyone know how to solve the problem?
Gigadroid said:
I've tried to unpack the boot.img from CM7 for the Galaxy Player 4.0, but I always get the message:
Android Magic not found in boot.img. Giving up.
Does anyone know how to solve the problem?
Click to expand...
Click to collapse
I also got this error with Dsixda's kitchen (you are using it right?). I didn't know how to fix it so I gave up, but I found this page which explains it a bit. Apparently its to do with the gzip file missing a certain hex code or something
Related
Im trying to create my own custom ROM from the stock Rogers RUU, im using dsixdas Rom kitchen tool.
Everythings going great, but when it comes to flash it, it starts too, then says sdcard error, status 0
thats all i get ive tried with already rooted custum roms, still get the same when i try to flash it?
markdexter said:
Im trying to create my own custom ROM from the stock Rogers RUU, im using dsixdas Rom kitchen tool.
Everythings going great, but when it comes to flash it, it starts too, then says sdcard error, status 0
thats all i get ive tried with already rooted custum roms, still get the same when i try to flash it?
Click to expand...
Click to collapse
Make sure the boot.img system and meta-imf are all in the root of ur zip, and not in a folder. I had this problem, was called Honeysense, and inside the zip was a folder with them files and folders
Sent from my HTC Vision using XDA App
markdexter said:
Im trying to create my own custom ROM from the stock Rogers RUU, im using dsixdas Rom kitchen tool.
Everythings going great, but when it comes to flash it, it starts too, then says sdcard error, status 0
thats all i get ive tried with already rooted custum roms, still get the same when i try to flash it?
Click to expand...
Click to collapse
As a beginning ROM dev, one of the troubleshooting tools which will really help will be learning how to read the recovery error log. The recovery error log will contain more verbose error messages than what is output to the display screen. This error log will contain all issues with the general .zip file and specifically with the updater-script file.
The recovery log is usually located at either or both /tmp/recovery.log or /cache/recovery.log.
If you can post up the section of this log containing your error we can provide a more specific solution. Hope that helps! Good luck!
joeykrim said:
As a beginning ROM dev, one of the troubleshooting tools which will really help will be learning how to read the recovery error log. The recovery error log will contain more verbose error messages than what is output to the display screen. This error log will contain all issues with the general .zip file and specifically with the updater-script file.
The recovery log is usually located at either or both /tmp/recovery.log or /cache/recovery.log.
If you can post up the section of this log containing your error we can provide a more specific solution. Hope that helps! Good luck!
Click to expand...
Click to collapse
Thanks buddy, will try to post it later, I'm wondering if I was to flash it using clockwork recovery, instead of the team revolution recovery, the rom itself looks identical to other working roms when I compare them side by side using 7zip, not completely identical but everything looks like it's in the right place if you know what I mean.
I even took a custom rom that works on my phone, put it through the kitchen, didn't really change anything with it, when I tried to flash it, got the status 0 error, wondering if it's the recovery having trouble seeing it? I always change it back to updater-script, which is recommended, oh well keep playing with it, thanks
Sent from my HTC EVO 3D X515a using xda premium
Hi, i am trying to change the bootclasspath from a samsung boot.img but every time i try to unpack it it givers a Magic header error can someone help me ?
Try this: http://www.freeyourandroid.com/guide/extract-edit-repack-boot-img-windows
Or another tutorial from this site.
Ps: If you have sucess with this, post here
samcortez said:
Try this: http://www.freeyourandroid.com/guide/extract-edit-repack-boot-img-windows
Or another tutorial from this site.
Ps: If you have sucess with this, post here
Click to expand...
Click to collapse
I already tried it but it gives a error now i am going to eat after dinner i will look what the problen was again
Sent from my Amazon Kindle Fire using Tapatalk
Edit: i am going to use cygwin because maybe my ubuntu isn’t setup wel
i have tried it with cygwin and it isn't working.
Guys, I'm really bugged by the Cherry Mobile Flare logo. It's like this: when our devices (S100, otherwise known as the Karbonn A9+ in India) are still in Android ICS(4.0.4), it's really a breeze to change the boot(splash) logo using the AIO flasher. Anyways, since we updated our devices to JB 4.1.2, I have tried and failed (countless times) in changing the boot logo using AIO (partition table does not exist). The boot logo also appears during off-charging (before the animated battery).So I searched the web and found the link below(which looks promising) and tried but I get the "can't open dev/block/mmcblock0p18" error. :crying: Any help is most appreciated guys! It's NOT the boot animation, it's THE boot logo guys.
This is the link guys
http://www.modaco.com/topic/360665-guide-custom-boot-splash-image/
You'll have to modify kernel (boot.img) yourself then I guess
Try Android Kitchen to extract it and see if you get access to logo.rle
Boot.img
iamareebjamal said:
You'll have to modify kernel (boot.img) yourself then I guess
Try Android Kitchen to extract it and see if you get access to logo.rle
Click to expand...
Click to collapse
I'm NOT really into linux, Master. Could you give it a try? I'll upload a boot.img of the phone if you have the time to tinker with it.
denzhou said:
I'm NOT really into linux, Master. Could you give it a try? I'll upload a boot.img of the phone if you have the time to tinker with it.
Click to expand...
Click to collapse
DSIXDA kitchen also works on Windows using Cygwin
I would've done but I'm away from PC for some days
Cygwin is not for noobs like me
iamareebjamal said:
DSIXDA kitchen also works on Windows using Cygwin
I would've done but I'm away from PC for some days
Click to expand...
Click to collapse
Thanks, but cygwin is not for noobs like me :crying: I'll just upload the boot.img for you to tinker on on your spare time.
exactly same problem with my karbonn a9+
denzhou said:
Guys, I'm really bugged by the Cherry Mobile Flare logo. It's like this: when our devices (S100, otherwise known as the Karbonn A9+ in India) are still in Android ICS(4.0.4), it's really a breeze to change the boot(splash) logo using the AIO flasher. Anyways, since we updated our devices to JB 4.1.2, I have tried and failed (countless times) in changing the boot logo using AIO (partition table does not exist). The boot logo also appears during off-charging (before the animated battery).So I searched the web and found the link below(which looks promising) and tried but I get the "can't open dev/block/mmcblock0p18" error. :crying: Any help is most appreciated guys! It's NOT the boot animation, it's THE boot logo guys.
Click to expand...
Click to collapse
found any solution yet???
Need Karbonn A9+ Splash screen. Pleaseeee send
Hi,
Can anyone send across me the original splash screen file(splash_rs.img) or (splash.img).
I searched mannually for the file which which contain the splash screen, but not able to get, if anyone knows that file then please do let me know.
Or else if anyone get the originall Karbonn A9+ ROM, then please forward that to my mail ID.
I googled a lot for both the thing..... But not able to find.
I know the procedure to flash the Splash screen with AIO flasher Software,
request you all to send the file to my mail ID or post it here.
My Email ID: [email protected]
Thanks & Regards,
Rahul Kumar
iamareebjamal said:
You'll have to modify kernel (boot.img) yourself then I guess
Try Android Kitchen to extract it and see if you get access to logo.rle
Click to expand...
Click to collapse
i just extract the boot.img and nothing found like logo.rle ...
need stock splash screen for cherry flame 2.0
hello guys, newbie here... i just want to ask where in the emmc can i find the contents in the partition mmcblk0p12 and mmcblk0p14? i flashed .img files that changed my boot logo... i want to revert back to stock..
i have a cherry mobile flame2.0 (karbonn s1 titanium)... jb 4.1.2.. pretty much similar to cherry mobile flare jb in terms of software i should say because i was able to run ROM/mods/tweaks for flare with my f lame2..
So here's the thing, first off this Tablet as great as it is..seems like a ghost of an existence in the android community.
Anyways please please anyone at all any suggestions, I've tried numerous things to get out of this boot loop... So what happened is I ended up updating this device with Asus latest zip file they said to manually update with for Marshmellow
I've tried to re-install the zip file again using the IntelAndroid-FBRL-07-24-2015, to which now doesn't work nor does ADB Fastboot, it recognizes the device.. but now all commands pretty much fail... I don't know what else to do with this.
I did however installed the Asus Flash Recovery Program, I just cannot for the life of me find what file to use to re-flash this. Anyone please ANY SUGGESTIONS
If anyone at all has access or knows a working link for ZenPad Recovery files or raw image files.. I haven't been able to see if Asus Flash Recovery can help.
bert_747 said:
So here's the thing, first off this Tablet as great as it is..seems like a ghost of an existence in the android community.
Anyways please please anyone at all any suggestions, I've tried numerous things to get out of this boot loop... So what happened is I ended up updating this device with Asus latest zip file they said to manually update with for Marshmellow
I've tried to re-install the zip file again using the IntelAndroid-FBRL-07-24-2015, to which now doesn't work nor does ADB Fastboot, it recognizes the device.. but now all commands pretty much fail... I don't know what else to do with this.
I did however installed the Asus Flash Recovery Program, I just cannot for the life of me find what file to use to re-flash this. Anyone please ANY SUGGESTIONS
If anyone at all has access or knows a working link for ZenPad Recovery files or raw image files.. I haven't been able to see if Asus Flash Recovery can help.
Click to expand...
Click to collapse
The same thing happened to me yesterday. I tried the Asus Flash Recovery Program and found a raw file that seemed to be the right one. After flashing the tabled remained stuck on a spinning logo, however a hard reset in recovery solved that. My tablet is now back up and running.
The RAW image:
https://mega.nz/#!S5hkyIgA
Hope you get it working again
pkemeling said:
The same thing happened to me yesterday. I've been trying to un-brick my ZenPad, but with no luck so far. I tried the Asus Flash Recovery Program and found a raw file that seemed to be the right one. After flashing the tabled remained stuck on a spinning logo, however a hard reset in recovery solved that. My tablet is now back up and running.
The RAW image:
https://mega.nz/#!S5hkyIgA
Hope you get it working again
Click to expand...
Click to collapse
Wow thank you so much sadly I cannot download the raw you sent me says I need a Decryption Key before I can download? Do you know that key? Please Many thanks!!!
bert_747 said:
Wow thank you so much sadly I cannot download the raw you sent me says I need a Decryption Key before I can download? Do you know that key? Please Many thanks!!!
Click to expand...
Click to collapse
AH, yeah, wrong link. Try this one
https://mega.nz/#!S5hkyIgA!2Twg37uNswnFWb0-oTvLHxwijf7GwnpGpicEVhBt1t0
pkemeling said:
AH, yeah, wrong link. Try this one
https://mega.nz/#!S5hkyIgA!2Twg37uNswnFWb0-oTvLHxwijf7GwnpGpicEVhBt1t0
Click to expand...
Click to collapse
Downloading I'll keep posted for results thank you again so much!!! I hope this works for me as well.
pkemeling said:
AH, yeah, wrong link. Try this one
https://mega.nz/#!S5hkyIgA!2Twg37uNswnFWb0-oTvLHxwijf7GwnpGpicEVhBt1t0
Click to expand...
Click to collapse
Can you tell me what version of Asus Flash Tool you were using? I'm trying to us the 1.0.014 but alll it lets me use is a zip file. I've seen videos people using 1.0 and pulling up a choice between zip file or raw files.
If you can let me know that would be great and thanks again for your help!
bert_747 said:
Can you tell me what version of Asus Flash Tool you were using? I'm trying to us the 1.0.014 but alll it lets me use is a zip file. I've seen videos people using 1.0 and pulling up a choice between zip file or raw files.
If you can let me know that would be great and thanks again for your help!
Click to expand...
Click to collapse
I used version 1.0.14
http://www.asus-zenfone.com/2015/12/download-asus-flashtool-10014-for-windows.html
I just selected Z580CA and flashed the raw file. It wouldn't let me flash any ZIP, so I had so search for the correct image.
I zipped the RAW file ...
Working as expected and debricked my asus
Cool & Thanks !
Z580C tablet is bricked, it happened on update, I think battery was too low. Screen is black all the time, under windows device manager it connects as Intel Soc/ Moorefield Device (Intel platform Flash Tool Lite is installed and this tool is seeing that device is connected and it reboots (connects/reconnects) every few minutes), tablet does not connect as Android adb deivice and Android Flash Tool doesn't see device. Any suggestions !?
Thank you
a problem
my version is cn. now i can only connect my tab with computer through intel platform flash tool lite. i download the cn.zip from asus website but i cannot find any flash.xml in the zip but some .img can you help me
After flashing the Stock rom of colors E20 my phone stuck in the red colour display. How to solve it out?
I used SP flash tool for flashing. I downloaded flash file from firmware file .com .
Manish Lamichhane said:
After flashing the Stock rom of colors E20 my phone stuck in the red colour display. How to solve it out?
I used SP flash tool for flashing. I downloaded flash file from firmware file .com .
Click to expand...
Click to collapse
Did the file download have a hash value or file to check if the download is good? This is usually an md5 or sha255 checksum that is used to verify data integrity. That's really the only way to be sure the file wasn't corrupted during a download.
Aside from making sure you're flashing a good file, you should wipe cache/dalvik cache.
Was the stock ROM equivalent to the last stock that was on the device? Some devices don't like a roll back to an old version.
Yes the file contains checksum file but it shows error while flashing. Saying "error in checksum value" so i removed the checksum file and flashed. It is the equivalent version of rom previously mobile had.
You can visit the website to check the file either error or not. Please help me to overcome this problem.
Manish Lamichhane said:
Yes the file contains checksum file but it shows error while flashing. Saying "error in checksum value" so i removed the checksum file and flashed. It is the equivalent version of rom previously mobile had.
You can visit the website to check the file either error or not. Please help me to overcome this problem.
Click to expand...
Click to collapse
If there is an error in checksum value, I would be pretty suspicious. The fact that you're now having trouble makes me more suspicious. Maybe you should try the download again, or a different download.
This is not a well supported device. Where did you get the ROM from?
Firmwarefile.com
Can you find out the stable file for me?
Help me to find error free rom file?
Manish Lamichhane said:
Help me to find error free rom file?
Click to expand...
Click to collapse
I have spent a significant amount of time hunting down an E20 ROM. The only links that are not dead, link back to that same file. I did see several posts on different sites referring to that file and its failure to work. I'm sorry, I don't know how else to help you.
ktmom said:
I have spent a significant amount of time hunting down an E20 ROM. The only links that are not dead, link back to that same file. I did see several posts on different sites referring to that file and its failure to work. I'm sorry, I don't know how else to help you.
Click to expand...
Click to collapse
Cant you find out the error location in the file so that you can modify it? i have listened that people modify roms and sell them at good price.
ktmom said:
I have spent a significant amount of time hunting down an E20 ROM. The only links that are not dead, link back to that same file. I did see several posts on different sites referring to that file and its failure to work. I'm sorry, I don't know how else to help you.
Click to expand...
Click to collapse
cant you find error location in the file? so that we can edit or replace that particular file. People modify roms i have seen them.