hello everyone,
some time ago a korean rom has been leaked. since i managed to (soft-)brick my yp-gs1 a while ago i'm now eager to flash that rom.
now, i'm in need of a pit file because i use heimdall on linux.
i'd be very thankful for your help.
dominikk said:
hello everyone,
some time ago a korean rom has been leaked. since i managed to (soft-)brick my yp-gs1 a while ago i'm now eager to flash that rom.
now, i'm in need of a pit file because i use heimdall on linux.
i'd be very thankful for your help.
Click to expand...
Click to collapse
Why don't you just extract your pit in heimdall?
zaclimon said:
Why don't you just extract your pit in heimdall?
Click to expand...
Click to collapse
is it still possible to do that after trying to flash a rom for a different device (by accident)?
dominikk said:
is it still possible to do that after trying to flash a rom for a different device (by accident)?
Click to expand...
Click to collapse
As long as you didn't flash the pit for the other ROM. (You don't actually have to flash the pit. Heimdall just uses it to know what partitions your device has)
Sent from my 5.0 USA GenGin + ICS theme
Related
Hi,
is it possible to flash any stock 4.0.3 rom with odin?
Sorry for my question, i´m a newbie here.
Thanks
As long as it's a stock ROM, yes.
PC Odin: Stock ROM's
Mobile Odin & CWM: Everything
Are you using a Samsung phone?
If yes, then yes you can.
I use odin to flash almost everything i use.
Have the port mapping detected and your phone's .ops file along with the ROM
Hi guys,
My friend's got a problem. He installed resurrection remix v 1.9.1 by westcrip 4.0.4 on his s2.
The kernel is:
3.0.31-siyah-v.3.2.4+
[email protected] #32
SMP PREEMPT Thu May 17 17:46:03
EEST 2012
He didn't do a backup before installing it and now he wants the original rom back. Could anyone here tell me exactly what he has to do?
He doesn't know anything about flashing roms etc and he did it as in the tutorial to get resurrection remix, so we need an easy tutorial (I don't own a s2 so I can't help him much).
His S2 has no branding.
Thx and please help!
Michi
Michi_optimus_me said:
He didn't do a backup before installing it and now he wants the original rom back.
Click to expand...
Click to collapse
Only your friend can know what firmware was on his phone before flashing the custom ROM. I suggest to use CheckFus to get the latest official firmware for the phone and then flash it using ODIN.
Michi_optimus_me said:
He doesn't know anything about flashing roms etc and he did it as in the tutorial to get resurrection remix, so we need an easy tutorial (I don't own a s2 so I can't help him much).
Click to expand...
Click to collapse
Using CheckFus is self-explanatory and for using ODIN there are already many excellent and easy to read guides here.
So CheckFus will tell which firmware is right for his device? It will tell exactly which firmware?
And could you post a link to a thread, where is explained how to flash the firmware using odin. Cause I don't understand anything about basebandkernel, and we don't know which firmware was there as he bought the device and which kernel and which baseband and whatever. Is there any tutorial for noobs?
Could you excatly post which firmware we need from here to get phone back on stock ics? We want a german firmware if possible. (I know you could just say ask google, but at xda heres a great community and I don't understand anything of odin and want to know which files exactly I have to download for phone, pda and cdc. That would be so great!)
Please help us!
Thx in advance!
Michi
EDIT:: I found this here: http://androidfirmwares.net/PhoneFirmware/Download/120
Can I download there and then I have to put them like this:
PDA: XWLPF
PHONE (Modem): XXLPX
CSC: OXILP6
?
And then get s2 to download mode?
And what about the kernel? There is this kernel on s2 right now:
3.0.31-siyah-v.3.2.4+
[email protected] #32
SMP PREEMPT Thu May 17 17:46:03
EEST 2012
How can I flash stock kernel? Or is it included in these PDA,PHONE,CSC Files?
Michi_optimus_me said:
So CheckFus will tell which firmware is right for his device? It will tell exactly which firmware?
Click to expand...
Click to collapse
Yes
Michi_optimus_me said:
And could you post a link to a thread, where is explained how to flash the firmware using odin. Cause I don't understand anything about basebandkernel, and we don't know which firmware was there as he bought the device and which kernel and which baseband and whatever. Is there any tutorial for noobs?
Click to expand...
Click to collapse
You will have to do quite a lot of reading. Start by reading the Stickies and then read this thread which explains how to use ODIN.
Remember: only fools rush in - take your time and read before flashing
Thanks a lot, but what about kernel now? We'll have to read the thread, but I just want to know if the firmware from android firmware was right and if I could flash the rom if I just put these 3 Phon,Pda and Csc in the fields and without repartition. So what about the kernel?
Sorry if I nerve you, but I'm a noob with s2/flashing etc and it's not my phone
Thx!
Michi_optimus_me said:
So what about the kernel?
Click to expand...
Click to collapse
The kernel is part of the stock firmware.
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Michi_optimus_me said:
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
You can try www.sammobile.com for stock firmware too. You'll have to sign up, but it's worth it. You just search for the stock firmware for your device and flash through Odin. Do not use the repartition button or the pit file and you should be fine.
Sent from my GT-I9100 using xda premium
Michi_optimus_me said:
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
I doubt that, the 7z file contains one tar.md5 file. Do not untar it, no one said you should do so. For ODIN read and follow the instructions according to the link I posted in post #4. That thread tells you what to do with the firmware file.
Michi_optimus_me said:
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
extract the file u downloaded from samfirmware or checkfus
u will have two files in it (in Latest gb or ics)
insert it in pda and flash
and ur done
the kernel is included in the firmware ..
Thx guys now I hope this is my last question on this topic:
I read the guide and downloaded a firmware. Now I don't understand the thing with checkfus. Do I really need checkfus or can I just download this firmware for a s2, unbranded, bought on amazon and it's a german s2?
Can I only put this extracted .tar.md5 file in PDA Section in Odin, boot s2 into download mode and connect to pc. Then click start and everything should went fine?
I own a xperia mini pro and there I must flash kernel and then firmware, so at odin and s2 the kernel will be changed when I flash pda and is included in pda?
Sorry, I asked same before, but I don't really understood
Thx for your great answeres, xda is a super community!
Michi_optimus_me said:
Thx guys now I hope this is my last question on this topic:
I read the guide and downloaded a firmware. Now I don't understand the thing with checkfus. Do I really need checkfus or can I just download this firmware for a s2, unbranded, bought on amazon and it's a german s2?
Click to expand...
Click to collapse
CheckFus is used to download the latest firmware. As you have downloaded the firmware from somewhere else, you do not need CheckFus anymore.
Michi_optimus_me said:
Can I only put this extracted .tar.md5 file in PDA Section in Odin, boot s2 into download mode and connect to pc. Then click start and everything should went fine?
Click to expand...
Click to collapse
Yes, exactly, load the tar.md5 file.
Michi_optimus_me said:
I own a xperia mini pro and there I must flash kernel and then firmware, so at odin and s2 the kernel will be changed when I flash pda and is included in pda?
Click to expand...
Click to collapse
Yes, correct, as stated earlier.
Michi_optimus_me said:
Sorry, I asked same before, but I don't really understood
Click to expand...
Click to collapse
No problem, better ask if unsure.I can see, you did some reading
Flash stock rom after resurrection remix
I just reflashed my samsung J-500H with the stock rom after gapps started crashing on resurrection remix. I had no problems going back to stock except the I had a boot loop for a few times my remedy was to do a data and factory reset on stock recovery. I will reflash RR after I find gapps that would work on my J5 Lollipop. Any suggestions?
Hi, i just bought my note 2 and ive already unlocked it and rooted it, i want to use a ROM that has 4.3 Jelly Bean like the N3BULA ROM, it says flash the MJ9 OTA Firmware using Odin. But on the forums there is a forum called "Once you're unlocked don't use odin to flash custom ROMs"
1. I should be able to flash the MJ9 using odin safely right because its not a custom rom right?
2. How do i flash the MJ9 update using odin?
3. Once i flash the MJ9 update can i still use non 4.3 ROM?
Question 1: You are correct.
Question 2: Download, then extract with 7zip. Put phone into download mode. Open Odin on computer and connect the phone. Place extracted md5 into the pda slot and hit start. It'll do it's thing and your phone will reboot and be done.
Question 3: Yes as long as don't take the OTA update from Samsung you will able load roms as usual
Once my phone is in download mode, odin doesn't recognize my phone. Any reason why ? I'm so frustrated
pacedrum69 said:
Once my phone is in download mode, odin doesn't recognize my phone. Any reason why ? I'm so frustrated
Click to expand...
Click to collapse
Check your drivers. If you've used casual, sometimes removing those drivers will help and by also installing updated Samsung drivers.
If you've done all of the above and it's still not recognized. I recommend trying a different USB cable.
Sent from my SCH-I605 using Tapatalk
synapsesboob said:
Check your drivers. If you've used casual, sometimes removing those drivers will help and by also installing updated Samsung drivers.
If you've done all of the above and it's still not recognized. I recommend trying a different USB cable.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Ive tried everything :-/ ugh
whn flashing in odin will a pit file also be needed (wana flash stock mj9)
I didn't need it..
Sent from my SCH-I605 / Galaxy Note 2 / JB 4.3 / Unlocked, Rooted and ROMed... using Tapatalk v 2.4.13
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
pacedrum69 said:
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Whats the problem? Does Odin Start doing it atleast??
pacedrum69 said:
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
sometimes it happen to me to,
if driver is not the issue, then try close the odin and unplugged the cable, plug it back then start odin.
Bonkurei said:
sometimes it happen to me to,
if driver is not the issue, then try close the odin and unplugged the cable, plug it back then start odin.
Click to expand...
Click to collapse
Info that may help: I searched here in xda not on this device or I'd post a link, for how to install Odin and found that for each Samsung device there are some set of Odin versions that are compatible. I used Odin just now (took less than a minute) version 3.07 for my phone. Note that my drivers were already installed and working since I unlocked the bootloader a year ago. For others: it simply rebooted afterwards and all is well.
Can anyone give me the download link for MJ9 OTA Firmware by Beans?
Thanks
Mr_Denni said:
Can anyone give me the download link for MJ9 OTA Firmware by Beans?
Thanks
Click to expand...
Click to collapse
Here's a link where you can grab the MJ9 firmware provided by Beanstown106... ( http://forum.xda-developers.com/showthread.php?t=2578458 ). Look down on the first post of the thread for the link to "Full Firmware Package" that you need to flash in Odin...that will bring you to the Android file host where you can download Beanstown106's file-- "toltevzw_mj9_official_firmware.tar.md5.7z."
Also, here's a link to a post with more detailed instructions on how to Odin flash it after you download and unzip the file... ( http://forum.xda-developers.com/showthread.php?p=50047714&highlight=unzip#post50047714 ).
Please make sure to do a thanks to BeansTown106 for the firmware file and to sithjedi333 for the helpful instructions.
Sent from my SCH-I605 using XDA Premium 4 mobile app
mattnmag said:
Here's a link where you can grab the MJ9 firmware provided by Beanstown106... ( http://forum.xda-developers.com/showthread.php?t=2578458 ). Look down on the first post of the thread for the link to "Full Firmware Package" that you need to flash in Odin...that will bring you to the Android file host where you can download Beanstown106's file-- "toltevzw_mj9_official_firmware.tar.md5.7z."
Also, here's a link to a post with more detailed instructions on how to Odin flash it after you download and unzip the file... ( http://forum.xda-developers.com/showthread.php?p=50047714&highlight=unzip#post50047714 ).
Please make sure to do a thanks to BeansTown106 for the firmware file and to sithjedi333 for the helpful instructions.
Click to expand...
Click to collapse
Thank you very much, bro for your links :good:
Hey guys instead of starting a new thread I thought I would ask here... I just bought a rooted note 2 on craigslist and it has the N3bula rom on it, but it is the first version. It is a little slow for me, so i wanna flash the N3bula 2 rom, but I am not sure if I have the MJ9 thing on my phone. Is there any way to check?
washburnky said:
Hey guys instead of starting a new thread I thought I would ask here... I just bought a rooted note 2 on craigslist and it has the N3bula rom on it, but it is the first version. It is a little slow for me, so i wanna flash the N3bula 2 rom, but I am not sure if I have the MJ9 thing on my phone. Is there any way to check?
Click to expand...
Click to collapse
settings > about device > look the baseband version it shoud say like this I605VRUEMJ9
but since its already run on N3bula i think its already on MJ9.
MJ9 Flashing failed
I tried to flash the MJ9 firmware many times through odin , but every time it fails on the modem.bin .... any ideas ?
hazemsalah said:
I tried to flash the MJ9 firmware many times through odin , but every time it fails on the modem.bin .... any ideas ?
Click to expand...
Click to collapse
Also while installing 4.1.2 VRAMC3 stock unrooted rom , the odin fails at modem.bin
I never took the 4.3 OTA
I can run the TWRP recovery and install custom roms [4.1.2 CleanROM V5] , but the baseband version is unknown and the network is not working , even i have installed VRAM3 Modem or VRALL4
Note: I have flashed the ND7 modem and MJ9ModemParam before while trying to install 4.4.2 roms
Im stuck now , and can not use the mobile network
Please Help!!
hazemsalah said:
Also while installing 4.1.2 VRAMC3 stock unrooted rom , the odin fails at modem.bin
I never took the 4.3 OTA
I can run the TWRP recovery and install custom roms [4.1.2 CleanROM V5] , but the baseband version is unknown and the network is not working , even i have installed VRAM3 Modem or VRALL4
Note: I have flashed the ND7 modem and MJ9ModemParam before while trying to install 4.4.2 roms
Im stuck now , and can not use the mobile network
Please Help!!
Click to expand...
Click to collapse
Go to General Section and look at the Data Corruption thread. Directions are there for flashing a Stock Recovery. Do a factory reset with stock recovery. Try that and report back..I have a flashable modem as well so let us know..
lacoursiere18 said:
Go to General Section and look at the Data Corruption thread. Directions are there for flashing a Stock Recovery. Do a factory reset with stock recovery. Try that and report back..I have a flashable modem as well so let us know..
Click to expand...
Click to collapse
I did , but still the same
hello, i post another message, i need some help please.
my SGP 4.2 YP-GI1 CW/XEG is locked on samsung logo with warning panel. I flash the CWM one time and i try to flash rom's and CM7 but all are failed.
After multiple flash i loose CWM and now i can,t reflash it !! WHY??
i think my problem's cames from a bad PIT file, this is the only file i can flash with odin and succès.(YP-G1Intl.pit) and i don't know if it is the good one for my player.
If someone have and idea for help me...... please.
taburetloic said:
hello, i post another message, i need some help please.
my SGP 4.2 YP-GI1 CW/XEG is locked on samsung logo with warning panel. I flash the CWM one time and i try to flash rom's and CM7 but all are failed.
After multiple flash i loose CWM and now i can,t reflash it !! WHY??
i think my problem's cames from a bad PIT file, this is the only file i can flash with odin and succès.(YP-G1Intl.pit) and i don't know if it is the good one for my player.
If someone have and idea for help me...... please.
Click to expand...
Click to collapse
You should boot back into download mode, flash the PIT file, then the CWM kernel and if you're unable to flash any ROM with CWM, you should flash the stock ROM with ODIN.
taburetloic said:
hello, i post another message, i need some help please.
my SGP 4.2 YP-GI1 CW/XEG is locked on samsung logo with warning panel. I flash the CWM one time and i try to flash rom's and CM7 but all are failed.
After multiple flash i loose CWM and now i can,t reflash it !! WHY??
i think my problem's cames from a bad PIT file, this is the only file i can flash with odin and succès.(YP-G1Intl.pit) and i don't know if it is the good one for my player.
If someone have and idea for help me...... please.
Click to expand...
Click to collapse
drakonizer said:
You should boot back into download mode, flash the PIT file, then the CWM kernel and if you're unable to flash any ROM with CWM, you should flash the stock ROM with ODIN. And yes, the PIT file you have is appropriate for your player
Click to expand...
Click to collapse
As drakonizer said, yes you should be able to get into download mode. The problem comes indeed from the fact that you're using a wrong pitfile (YP-G1 is SGP 4.0 whereas YP-GI1 is SGP 4.2) Maybe retrying with the good pit file should do the trick.
zaclimon said:
As drakonizer said, yes you should be able to get into download mode. The problem comes indeed from the fact that you're using a wrong pitfile (YP-G1 is SGP 4.0 whereas YP-GI1 is SGP 4.2) Maybe retrying with the good pit file should do the trick.
Click to expand...
Click to collapse
THANKS @zaclimon ! I am so sorry I misread YPG1 as YPGI1, please don't try to use that!
Here is a pit file you can use
http://forum.xda-developers.com/attachment.php?attachmentid=1324378&d=1347565906
...there is no PIT file that is uploaded for the INTL GP4.2, but I'm pretty sure that there is no difference between the US and INTL versions with respect to the PIT file...you can try anyway
Yp-gi1cw/xeg
drakonizer said:
THANKS @zaclimon ! I am so sorry I misread YPG1 as YPGI1, please don't try to use that!
Here is a pit file you can use
http://forum.xda-developers.com/attachment.php?attachmentid=1324378&d=1347565906
...there is no PIT file that is uploaded for the INTL GP4.2, but I'm pretty sure that there is no difference between the US and INTL versions with respect to the PIT file...you can try anyway
Click to expand...
Click to collapse
hello and thank you to help me. I have flash with a new pit file and now it's good, i have CWM on the player ......:good:
But i try to flash a stock rom with odin and also the CM7.2 and all are failed.
i don't know why and what else i can do ? If someone have and idea...... Thank you.
i also try to install the .zip file via CWM and it is aborted........
Try something lower to flash if your found that to cm7.2
Sent from my YP-G70 using XDA Free mobile app
You should flash your stock ROM with ODIN from this thread: http://forum.xda-developers.com/showthread.php?t=1884071
Since your device is not YP-GI1/XEF, you might break your wifi, but you can fix it with the files from the CWM kernel thread.
i have install marshmallow 6.0.1 on my s2 it work well with pda i9100xwms1 after i will downgrade it on jellybean 4.1.2 i use a new rom official i9100xwms3 to flash after it reboot on Samsung logo. i think if i flash it to the first it will work so it is the same thinks it reboot on Samsung logo. please i need help to fix it.
i think that repartition can create this issue and how can repartition for jellybean and flash.
bauer145 said:
i have install marshmallow 6.0.1 on my s2 it work well with pda i9100xwms1 after i will downgrade it on jellybean 4.1.2 i use a new rom official i9100xwms3 to flash after it reboot on Samsung logo. i think if i flash it to the first it will work so it is the same thinks it reboot on Samsung logo. please i need help to fix it.
i think that repartition can create this issue and how can repartition for jellybean and flash.
Click to expand...
Click to collapse
Yes you need to repartition back to stock partitions I think. Your can search for a stock pit file for this.
BenjyTec said:
Yes you need to repartition back to stock partitions I think. Your can search for a stock pit file for this.
Click to expand...
Click to collapse
I get a Pit Stock will try and tell you
bauer145 said:
I get a Pit Stock will try and tell you
Click to expand...
Click to collapse
Fine it work well Thank