I heard that I may have to update the kernel on my EVO 3d with HBOOT-1.5 S-on. I have fully wiped my phone a couple of times and reinstalled with no success. Any insight would be greatly appreciated.
I had that issue with any ics rom. So I unlocked the bootloader with the juno method (s-off) and it stopped doing it
Sent from my HTC One X using xda premium
ryan.ellison said:
I heard that I may have to update the kernel on my EVO 3d with HBOOT-1.5 S-on. I have fully wiped my phone a couple of times and reinstalled with no success. Any insight would be greatly appreciated.
Click to expand...
Click to collapse
You have to flash the kernel for MeanRom ICS, since it can't use the stock GB kernel. I used Flash Image GUI(in the Play Store).
1) Open Flash Image GUI and go to your Mean Rom zip to flash the kernel.
2) Boot into recovery from Flash Image GUI.
3) Flash Mean Rom ICS and reboot.
Check out this video.
http://www.youtube.com/watch?v=nDFO6H1XObI
There are other ways of course like going to S-off, but since you are S-on, this should work.
aypanthony said:
You have to flash the kernel for MeanRom ICS, since it can't use the stock GB kernel. I used Flash Image GUI(in the Play Store).
1) Open Flash Image GUI and go to your Mean Rom zip to flash the kernel.
2) Boot into recovery from Flash Image GUI.
3) Flash Mean Rom ICS and reboot.
There are other ways of course like going to S-off, but since you are S-on, this should work.
Click to expand...
Click to collapse
I tried that and I'm still facing boot loop. Thanks very much for your help
Did you try fastboot flashing the boot.img file?
Sent from my HTC One X using xda premium
Yes i tried that as well. for some reason its still rebooting.
So your hboot 1.5 s-on... Hmm did you flash back to 2.17? Cause I say you try to get soff
Sent from my HTC One X using xda premium
I had the same exact problem, yep s-off is necessary in this case
Sent from my PG86100 using xda premium
Issue resolved. just had to flash a different kernel. Still S-on and its working perfectly with meanrom. Thanks everyone for your help
What kernel did you end up going with?
get 4ext recovery, it has smart flash so you won't be having to use guiflash or fastboot.. and boot loops are common with 1.5 hboot
For the future i would recomend installing 4ext recovery its a recovery biult for evo 3d on s-on. It lets you upload difrent roms. You could by that app at the playstore. You shold really check it out.
OK here's what I have have/have done:
HBOOT 1.50, S-ON
I used fastboot to flash 4ext 1.0.0.5 RC5 to the recovery so I wouldn't have to fastboot every time.
I also flashed "AnthraX-htcleak-rls1.zip" (within 4ext) which supposedly fixes reboot loops.
I would perform a "factory wipe" then turn on SmartFlash and then flash an ICS ROM (MeanROM 2.4, Clean ROM ICS RC2, Derp ROM BDM4.1, viperROM B3) and they all rebooted in one of three ways: as soon as I went to unlock, after sitting on the lock screen for about 5 seconds, or without the lock screen ever loading.
I got CleanROM Reborn (gingerbread) to load and I'm using that for now.
PhillyPhoto said:
OK here's what I have have/have done:
HBOOT 1.50, S-ON
I used fastboot to flash 4ext 1.0.0.5 RC5 to the recovery so I wouldn't have to fastboot every time.
I also flashed "AnthraX-htcleak-rls1.zip" (within 4ext) which supposedly fixes reboot loops.
I would perform a "factory wipe" then turn on SmartFlash and then flash an ICS ROM (MeanROM 2.4, Clean ROM ICS RC2, Derp ROM BDM4.1, viperROM B3) and they all rebooted in one of three ways: as soon as I went to unlock, after sitting on the lock screen for about 5 seconds, or without the lock screen ever loading.
I got CleanROM Reborn (gingerbread) to load and I'm using that for now.
Click to expand...
Click to collapse
First off, doing a factory wipe ins't enough generally. Grab superwipe from the first post of MeanROM ICS and flash that first. Do it multiple times to make sure everything gets clean. Then flash the ROM, and finally the AnthraX kernel.
1. superwipe
2. flash ROM
3. flash kernel
It your still have issues after this then you need to get your 3D s-off. Some just have trouble properly flashing the kernel with s-on on an ICS ROM
gonk24 said:
First off, doing a factory wipe ins't enough generally. Grab superwipe from the first post of MeanROM ICS and flash that first. Do it multiple times to make sure everything gets clean. Then flash the ROM, and finally the AnthraX kernel.
1. superwipe
2. flash ROM
3. flash kernel
It your still have issues after this then you need to get your 3D s-off. Some just have trouble properly flashing the kernel with s-on on an ICS ROM
Click to expand...
Click to collapse
OK, so here's what I ended up doing to get it to work:
Unlock the bootloader with the HTC tool
Flash the recovery using fastboot.exe with 4EXT 1.0.0.5 RC5 (I had actually downloaded this on my phone prio to doing anything so I had the zip file with the .img file in it)
Boot in to 4EXT recovery and turn on SmartFlash
Flash the superwipe zip first
Flash the ICS ROM (in this case MeanROM)
Flash the Anthrax zip file
Reboot the phone and let it go through the setup and it was all set!
So the most frustrating part was unlocking the bootloader, because I misread some instructions at first, and it took me a while to realize I could flash 4EXT to recovery to I wouldn't have to keep booting to it through my PC, but it all worked out in the end. I'm now running ICS on my phone and it was still less of a headache than waiting for Sprint.
A lot has changed in the last year and a half or so since I rooted my EVO 4G. Thanks everyone!
Related
I had my wife's EVO 3D working fine on VipeRom2.1 I think and when i tried to update it to 2.5 it went into a reboot loop. I cleared everything by formatting the system and clearing the cache and data and nothing. I tried a different rom, MeanRom and same thing. Right before it seems like it is going to get me to the unlock screen, reboot. I can get into the bootloader and the recovery just fine but no matter what i install, reboot, reboot, reboot.
Evo 3D
twrp 1.03
Recovery 2e
HBOOT 1.5
Any assistance would be greatly appreciated.
jschauf said:
I had my wife's EVO 3D working fine on VipeRom2.1 I think and when i tried to update it to 2.5 it went into a reboot loop. I cleared everything by formatting the system and clearing the cache and data and nothing. I tried a different rom, MeanRom and same thing. Right before it seems like it is going to get me to the unlock screen, reboot. I can get into the bootloader and the recovery just fine but no matter what i install, reboot, reboot, reboot.
Evo 3D
twrp 1.03
Recovery 2e
HBOOT 1.5
Any assistance would be greatly appreciated.
Click to expand...
Click to collapse
What software is your phone on ? The 2.08 or 2.17?
jschauf said:
I had my wife's EVO 3D working fine on VipeRom2.1 I think and when i tried to update it to 2.5 it went into a reboot loop. I cleared everything by formatting the system and clearing the cache and data and nothing. I tried a different rom, MeanRom and same thing. Right before it seems like it is going to get me to the unlock screen, reboot. I can get into the bootloader and the recovery just fine but no matter what i install, reboot, reboot, reboot.
Evo 3D
twrp 1.03
Recovery 2e
HBOOT 1.5
Any assistance would be greatly appreciated.
Click to expand...
Click to collapse
Did you change/update your radios at all?
I am not sure of the software version. I tried going back to unrooted stock with RUU_Shooter_U_HTC_ARA_1.24.415.2_Radio_10.55.9020.00_10.13.9020.29_M_release_208706_signed and it gave me a version error.
I am running radio 0.97.10.0808 according to the relocked screen that I am getting while trying to restore to unlocked sprint stock.
And now I see the difference in radio and the version in the restore file.
Thanks for the assistance, my Epic Touch 4g has been so simple to tinker with, this thing is a pain in the rear.
The RUU you installed was for the GSM version of the phone, re-run the CDMA version. The GSM version is called Shooter_U whereas the sprint version is just called Shooter.
I'm guessing this would be a good place to start?
http://www.scottsroms.com/downloads.php?do=cat&id=4
I will try this one when I get home today. Hopefully I can get it back stock and then start over and get a functional custom ROM working.
The wife was not to happy I blew up her phone yesterday trying to update it, I am guessing she is not going to let me "fix" it again.
Yupp, install one of them, not sure which one will allow you to do the HTC unlock though.
I think I figured out what I did wrong in the first place. Someone please correct me if I am wrong. I forgot that 1.5 S-ON can't just install the ROM from the standard recovery method like I can with my Epic Touch 4G. I think I need follow the "How to Flash Any ROM or Kernel You Want" instructions from http://forum.xda-developers.com/showthread.php?t=1239821. I just booted to recovery and tried to install the ROM. Does this sound about right?
jschauf said:
I think I figured out what I did wrong in the first place. Someone please correct me if I am wrong. I forgot that 1.5 S-ON can't just install the ROM from the standard recovery method like I can with my Epic Touch 4G. I think I need follow the "How to Flash Any ROM or Kernel You Want" instructions from http://forum.xda-developers.com/showthread.php?t=1239821. I just booted to recovery and tried to install the ROM. Does this sound about right?
Click to expand...
Click to collapse
I didn't look at the link you posted. But with hboot 1.5 you can not write to the boot partition from recovery. In order to do this you need to extract the boot img from the ROM your gonna flash and fastboot flash boot boot.img then fastboot boot recovery.img will take you to recovery and flash ROM from there
Sent from my PG86100 using XDA App
mteezey said:
I didn't look at the link you posted. But with hboot 1.5 you can not write to the boot partition from recovery. In order to do this you need to extract the boot img from the ROM your gonna flash and fastboot flash boot boot.img then fastboot boot recovery.img will take you to recovery and flash ROM from there
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
You actually dont need to do both. If you just do a fastboot boot recovery.img it will give you complete access, including flashing the kernal. So after you type that command, it will load a the custom recovery and when you flash the rom, it will flash the kernel included with the rom as well. FYI you need to do a fastboot boot recovery.img each time you want to flash a kernel. If you arent changing kernals then you can just go into recovery as you normally would and flash a rom. If you want to flash a kernal without hooking up to a computer, then read into Flash Image GUI.
JayDaKissEP said:
You actually dont need to do both. If you just do a fastboot boot recovery.img it will give you complete access, including flashing the kernal. So after you type that command, it will load a the custom recovery and when you flash the rom, it will flash the kernel included with the rom as well. FYI you need to do a fastboot boot recovery.img each time you want to flash a kernel. If you arent changing kernals then you can just go into recovery as you normally would and flash a rom. If you want to flash a kernal without hooking up to a computer, then read into Flash Image GUI.
Click to expand...
Click to collapse
This is what I thought, The first one I tried was the newest version of ViperRom. I first tried to just flash over top of the existing rom with the hope I would not have to reset everything and make her start over with how she had it setup, I guess the newest version had a newer kernel. Hopefully I am able to get it back to a functional state this afternoon.
jschauf said:
This is what I thought, The first one I tried was the newest version of ViperRom. I first tried to just flash over top of the existing rom with the hope I would not have to reset everything and make her start over with how she had it setup, I guess the newest version had a newer kernel. Hopefully I am able to get it back to a functional state this afternoon.
Click to expand...
Click to collapse
I believe that does have the anthrax kernel havent downloadedthe new version. However i know some people have been having problems with roms that are based off the new OTA if their phones still have the old firmware. Definatly flash teh kernel/boot via fastboot recovery that should take care of the problem.
Correction not anthrax.
I got everything back working yesterday, I guess doing it correct the first time will save me some headache. I just need to remeber to start recovery from windows instead of from the bootloader screen. Thanks for the assistance.
ok so i was running leedroid 5.4 with leedroids kernel, on my evo 3d GSM with hboot .0011 Unlocked and S-ON.....things were fine untill i tried to flash some other roms like shooterbeats and infected eternity rom, i was not able to get past the boot logo on both of those roms so i thought maybe it has something to do with my s-on....so i decided to make it s-off....after reading s_superman's thread for about 2 hours on how to downgrade hboot to .007 or 8 and unlock using revolutionary....i gave it a go, and did so sucessfully NOW MY HBOOT IS .007 with S-OFF using revolutionary and CWM but i am not able to FLASH ANY ROMz ON some roms my phone hangs on BOOT logo, and on some roms it restarts after LOGO appears........its really frustrating after so much hard work ,,,what i get in return is this...feel like throwin it outta window....ANY HELP WILL BE MUCH APPRECIATED ON HOW TO RESOLVE THIS issue?
now in recovery it shows "revolutionary HBOOT 1.49.1107 S-OFF RL"
well fortunately for you, sir, all is not lost....
flash twrp recovery 1.1.1.... just to get a start.
i have never had one single issue with twrp 1.1.1. if you are s-off, you can now flash kernels through recovery.
quick recap, flash twrp 1.1.1, reflash ROM, and kernel. both of which from recovery. if you still have booting issues, flash the kernel through adb.
do that, then come back and we'll go from there.
cobraboy85 said:
well fortunately for you, sir, all is not lost....
flash twrp recovery 1.1.1.... just to get a start.
i have never had one single issue with twrp 1.1.1. if you are s-off, you can now flash kernels through recovery.
quick recap, flash twrp 1.1.1, reflash ROM, and kernel. both of which from recovery. if you still have booting issues, flash the kernel through adb.
do that, then come back and we'll go from there.
Click to expand...
Click to collapse
Problem fixed by flashing the same RUU which i used to downgrade hboot before unlocking it with revolutionary, idk how ..but it fixed it...now all is good.... nd in recovery mode... it says "UNLOCKED" WHERE IT used to say revolutionary ....hboot 007 s-off........i didnt know what i was doing ..just wanted to brick it to death so i reflashed that image unexpectedly it fixed everything thanks anyway
You need 4ext custom recovery and yes twrp has issue's
Sent From my EVO 3D x515m s off using xda premium
I have tried to flash both Mean ROM ICS and viperROM ICS, but all i get is bootloops. I get to the main screen but all it does is reboot and say Android is Upgrading. BTW: S-ON HBOOT:1.5 Recovery:4EXT Smartflash ON
This is how i flash a ROM
1)From Fastboot boot into 4ext Recovery
2) Install Modified_Superwipe
3)Install the ROM
4) GET BOOTLOOPS!
EDIT:SORRY MENT S-ON
Waffle97slayer said:
I have tried to flash both Mean ROM ICS and viperROM ICS, but all i get is bootloops. I get to the main screen but all it does is reboot and say Android is Upgrading. BTW: S-OFF HBOOT:1.5 Recovery:4EXT Smartflash ON
This is how i flash a ROM
1)From Fastboot boot into 4ext Recovery
2) Install Modified_Superwipe
3)Install the ROM
4) GET BOOTLOOPS!
Click to expand...
Click to collapse
Hm. Maybe just try manually wiping everything from recovery instead? I never use superwipes and as long as I factory data reset x2, wipe cache/dalvik x2, I never have issues. That's just how I've done it on all my phones and I never have issues.
I just flashed Newts One S RC3. It took me a while but I finally found a method that worked. I did it once and got through set-up and was in play store downloading apps when it went into boot loop. I tried the same method again and it didn't work. I messed around with different methods for a while before getting the following to work.
What I'm using:
HTC Unlock method
Hboot 1.5
S-on
cwm recovery 4.0.1.4
I used a computer to fastboot to recovery. Did factory data reset, wipe dalvik, and cache all x2. I installed the .zip rom file from SD card. And then installed the .zip anthrax ics RLS5 kernel file from SD card. Then I rebooted and so far everything is working fine. I've been running it for a couple hours now. I manually downloaded my apps one by one from the play store for fear of repeating what happened to me the first time. And I've just finished signing in to everything I use and haven't had an issue yet.
I hope this helps.
Sent from my PG86100 using XDA
AmbrosiaLyn07 said:
I just flashed Newts One S RC3. It took me a while but I finally found a method that worked. I did it once and got through set-up and was in play store downloading apps when it went into boot loop. I tried the same method again and it didn't work. I messed around with different methods for a while before getting the following to work.
What I'm using:
HTC Unlock method
Hboot 1.5
S-on
cwm recovery 4.0.1.4
I used a computer to fastboot to recovery. Did factory data reset, wipe dalvik, and cache all x2. I installed the .zip rom file from SD card. And then installed the .zip anthrax ics RLS5 kernel file from SD card. Then I rebooted and so far everything is working fine. I've been running it for a couple hours now. I manually downloaded my apps one by one from the play store for fear of repeating what happened to me the first time. And I've just finished signing in to everything I use and haven't had an issue yet.
I hope this helps.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Yes i herd about this but have you tried charging or connecting your phone to a computer, many people can't charge or connect to computer via USB because of this kernel
Idk before I sent my phone in a had been using that kernel. I had no trouble charging/connecting. But really what it comes down to is every one of these phones is different, then you throw in the hboot and other key factors and it just gets worse.
veladem said:
Idk before I sent my phone in a had been using that kernel. I had no trouble charging/connecting. But really what it comes down to is every one of these phones is different, then you throw in the hboot and other key factors and it just gets worse.
Click to expand...
Click to collapse
I just flashed the viperROM ics and the kernel, HMMMM it seems like i got to the main screen and no bootloops.... ,,, one tiny problem, NO 4G
and yes 4g works for this rom,, well atleast it says so
Waffle97slayer said:
I have tried to flash both Mean ROM ICS and viperROM ICS, but all i get is bootloops. I get to the main screen but all it does is reboot and say Android is Upgrading. BTW: S-OFF HBOOT:1.5 Recovery:4EXT Smartflash ON
This is how i flash a ROM
1)From Fastboot boot into 4ext Recovery
2) Install Modified_Superwipe
3)Install the ROM
4) GET BOOTLOOPS!
Click to expand...
Click to collapse
Turn off smartflash if you are s-off you dont need it.
Then flash chads htc leak rls1 kernel, that stopped all the bootloops and problems for me its something about the stock kernel i am guessing. Everything worked fine after using that kernel. Anthrax rls5 says not to use it with sense 3.6, its right on androidfilehost. Chad said to use the leak rls1 instead for sense 3.6.
boot loop
wonder why every sense 4.0 ics rom i try to flash to my htc evo 3d... it always boot loop, i done tired everything everyone told me and the same thing happens.. only thing that really works on my phone is gingerbread... any suggestion??? really would appreciate it...
kameljr11 said:
wonder why every sense 4.0 ics rom i try to flash to my htc evo 3d... it always boot loop, i done tired everything everyone told me and the same thing happens.. only thing that really works on my phone is gingerbread... any suggestion??? really would appreciate it...
Click to expand...
Click to collapse
In my case I can't get any ROM based on the leaked RUU to boot unless I changed the kernel, this applies to both 3.6 and 4.0 ROMs. I don't know if you're GSM or CDMA but I know the kernel from Shooter_Ice works for me which is a GSM ROM. I can flash that over just about any ROM and it works or I can install the ROM straight up and it works to. If you're GSM, try that, if you're CDMA then look for a similar ROM that isn't based on the HTC leak.
kameljr11 said:
wonder why every sense 4.0 ics rom i try to flash to my htc evo 3d... it always boot loop, i done tired everything everyone told me and the same thing happens.. only thing that really works on my phone is gingerbread... any suggestion??? really would appreciate it...
Click to expand...
Click to collapse
Flash chad.goodman's RSL1 ICS KERNEL ,, worked for me
Boot loops on ics
I am also getting the same thing i am unlocked via the htc method cdma on hboot 1.5 whenever i try flashing a ics rom no matter which one it is I keep getting a boot loop to the htc screen any suggestions?
JonathanJ52 said:
I am also getting the same thing i am unlocked via the htc method cdma on hboot 1.5 whenever i try flashing a ics rom no matter which one it is I keep getting a boot loop to the htc screen any suggestions?
Click to expand...
Click to collapse
ICS ROMs bootloop if you are Hboot 1.5 S-On (which you are if you unlocked via HTC). I recommend you get S-off using the wire trick or downgrade to 1.4 S-off. See the stickies in the CDMA Development section (or GSM development) to find information and steps on how to do it.
Waffle97slayer said:
Flash chad.goodman's RSL1 ICS KERNEL ,, worked for me
Click to expand...
Click to collapse
Where Can I Download This. Not A Link Since U Cant Link From Other Development Sites, Just A Direction.
NexusS4gFreak said:
Where Can I Download This. Not A Link Since U Cant Link From Other Development Sites, Just A Direction.
Click to expand...
Click to collapse
infectedROM is where Chad works out of.
Sent from my ICS 3VO with Tapatalk 2
coal686 said:
ICS ROMs bootloop if you are Hboot 1.5 S-On (which you are if you unlocked via HTC). I recommend you get S-off using the wire trick or downgrade to 1.4 S-off. See the stickies in the CDMA Development section (or GSM development) to find information and steps on how to do it.
Click to expand...
Click to collapse
+1, go s-off and you can flash anything you want
Loop FIX
Sometimes you will get boot loops even with 4ext.
One thing that I have found which works is flashing mean ROM 2.4 ICS as a base.
This ROM probably will not boot or will get stuck in a boot loop but that is fine in this case. From there on use 4ext to complete a "dirty install" of another ICS ROM. I recommend SOS De-Sensed Rom. Sometimes flashing a ICS ROM on top of another ICS ROM (booting or non booting) allows for install.
to bypass all the bs go straight to fastboot and flash 4ext recovery 1.00.5 and do the s off wiretrick and then try to flash the rom... when you get s off it releases more permissions for the kernel to flash to the rom without having to use flash image gui from joekrimz
try this
ok you need to flash the boot.img file trough the bootloader, if that doesnt work try flash image gui
Flash custom rom then pull out your battery, go to fastboot then try flash this boot.img with fastboot http://db.tt/kEUVhnvV
Sent from my HTC EVO 3D X515m using xda premium
I have the CDMA Evo 3D
*** UNLOCKED ***
SHOOTER XC SHIP S-ON RL
HBOOT-1.50.0000
eMMC-boot
It is Rooted and running the Sprint 2.17 odex ROM 2.3.4 Gingerbread
With TWRP Recovery.
I've been reading forums for three weeks. No one has given me a clear answer.
What I want to do is get ICS. Now before you all facepalm and say "Use the wire trick noob" It's not that simple.
My phone was flashed to Boost Mobile. I didn't flash it and I have not the slightest Idea how to flash and according to support at http://www.unlimited.io The wire trick will clear my flash. So the wire trick is a no no.
Now there was a method where you flash the boot.img using fastboot
"fastboot flash boot boot.img"
It pushes it and says success.
Then I reboot into recovery (vol down and power button)
and flash the ROM. It bootloops every single time.
I've been looking for a way to S-Off safely with no luck, so now I'm determined to master the flash process. All i want is One working ICS ROM for my device.
Thanks in advance for the help, Nova.
Have you tried to flash the kernel AFTER flashing the ROM?
It really is being s-on that is causing the issue.
Save the Drama for your Mama with Tapatalk 2
coal686 said:
Have you tried to flash the kernel AFTER flashing the ROM?
It really is being s-on that is causing the issue.
Save the Drama for your Mama with Tapatalk 2
Click to expand...
Click to collapse
Gonna try now will edit with updates
Wiped Cache/dalvik cache now flashing PARANOIDANDROID ICS ROm..
Flash succcessful, pulled the battery and vol down=power into bootloader
now in fastboot, flashing boot.img
Sending...
OKAY
*Random times here*
Finished
Now i've rebooted and the bootanimation is playing. I'll update to tell if it's bootlooping
Yup, still bootlooping.
ried entire process with Cool ICS ROm. NO BOOTLOOP ! YAY!
but instead it shows the homescreen for three seconds then shuts off.
The link below discusses Boost. The poster seems to know a lot about Boost so you might want to PM him about getting s-off. I really do think s-off will fix your issues.
Save the Drama for your Mama with Tapatalk 2
Why don't you just flash a stock gingerbread ROM them stock recovery and relock your bootloader then take the ota update , let it install then unlock via HTC Dev again...
from what I learned from being S-ON with 1.5 unlocked, you have to:
flash the boot.img file BEFORE flashing the ROM. extract it from the ROM push it via fastboot, enter recovery via fastboot then wipe wipe WIPE everything except your SD card 3X, flash ROM, enjoy ICS goodness
mnomaanw said:
Why don't you just flash a stock gingerbread ROM them stock recovery and relock your bootloader then take the ota update , let it install then unlock via HTC Dev again...
Click to expand...
Click to collapse
Can you link me to a guide on this? And is there a guide to root the ICS update?
dgomez720 said:
from what I learned from being S-ON with 1.5 unlocked, you have to:
flash the boot.img file BEFORE flashing the ROM. extract it from the ROM push it via fastboot, enter recovery via fastboot then wipe wipe WIPE everything except your SD card 3X, flash ROM, enjoy ICS goodness
Click to expand...
Click to collapse
I tried it both ways around, it always bootloops.
_xNova said:
Can you link me to a guide on this? And is there a guide to root the ICS update?
Click to expand...
Click to collapse
Both are in the CDMA development stickies. I think rooting is still the same for the new ota.
Save the Drama for your Mama with Tapatalk 2
coal686 said:
Both are in the CDMA development stickies. I think rooting is still the same for the new ota.
Save the Drama for your Mama with Tapatalk 2
Click to expand...
Click to collapse
Found out how to go stock, but I only found bootloader locking tutorials for GSM phones. can you link to stock recovery?
Edit: Nevermind, I found all three.
_xNova said:
Found out how to go stock, but I only found bootloader locking tutorials for GSM phones. can you link to stock recovery?
Click to expand...
Click to collapse
Have you try using live boot-cd by unknownforce (hope not wrong to spell his name)? That method will temp brick your phone so all partition will back to stock, i have try once and my flashed number is disappear and need to reflash carrier once again.
Send From Sprint-HTC-Evo3D MIUI by Dh
dgomez720 said:
from what I learned from being S-ON with 1.5 unlocked, you have to:
flash the boot.img file BEFORE flashing the ROM. extract it from the ROM push it via fastboot, enter recovery via fastboot then wipe wipe WIPE everything except your SD card 3X, flash ROM, enjoy ICS goodness
Click to expand...
Click to collapse
If you are booting recovery via fast boot and then flashing a ROM, there is no need to flash boot.img separately. The recovery will work as if you are s-off. And there is no logic in wiping partitions 3x.....
Or you can directly flash a ROM from recovery without booting recovery via fast boot, and then flash boot.img via fast boot.
Or use 4ext recovery and turn smart flash on, and flash ROMs directly without using fast boot.
mnomaanw said:
If you are booting recovery via fast boot and then flashing a ROM, there is no need to flash boot.img separately. The recovery will work as if you are s-off. And there is no logic in wiping partitions 3x.....
Or you can directly flash a ROM from recovery without booting recovery via fast boot, and then flash boot.img via fast boot.
Or use 4ext recovery and turn smart flash on, and flash ROMs directly without using fast boot.
Click to expand...
Click to collapse
SO If I use 4EXT it'll let me flash ICS even though I currently run Gingerbread? I'll give it a try tonight, thanks
_xNova said:
SO If I use 4EXT it'll let me flash ICS even though I currently run Gingerbread? I'll give it a try tonight, thanks
Click to expand...
Click to collapse
If you can run ics ROM, then yes you can use 4ext recovery.....if you can't run ics in any way then you can't.
mnomaanw said:
If you can run ics ROM, then yes you can use 4ext recovery.....if you can't run ics in any way then you can't.
Click to expand...
Click to collapse
I can't, i'll just wait for an RUU of the OTA update, then re-root and flash ROMs then.
mnomaanw said:
Why don't you just flash a stock gingerbread ROM them stock recovery and relock your bootloader then take the ota update , let it install then unlock via HTC Dev again...
Click to expand...
Click to collapse
i have an stock 3d tto boostmobile, nothing changed no root no unlock, nothing, just a stock phone on boost, i got a ota ready to install, will this delete my flash? just wondering since i would love to have ics but on boost still, thanks.
stang04 said:
i have an stock 3d tto boostmobile, nothing changed no root no unlock, nothing, just a stock phone on boost, i got a ota ready to install, will this delete my flash? just wondering since i would love to have ics but on boost still, thanks.
Click to expand...
Click to collapse
It might my friend..maybe..juuust maybe it will. If it does o0u can always try and reflash back to Boost?
As far as I know, both unknownforce's, and the wire trick to downgrade the bootloader to hboot 1.4 will erase your flash to boost... Ask me how I know...lol!
Have you tried the app flash image GUI? When I was s on, I used this app to flash the kernel, then I went to recovery, and flashed the Rom, and all worked as long as the kernel was compatible with the specific Rom I was flashing, maybe you can try flashing the VM leak kernel, then an ics Rom
sent from my EVO 3D
mnomaanw said:
If you are booting recovery via fast boot and then flashing a ROM, there is no need to flash boot.img separately. The recovery will work as if you are s-off. And there is no logic in wiping partitions 3x.....
Or you can directly flash a ROM from recovery without booting recovery via fast boot, and then flash boot.img via fast boot.
Or use 4ext recovery and turn smart flash on, and flash ROMs directly without using fast boot.
Click to expand...
Click to collapse
That's just the way its ever worked for me so I found it was worth giving out my way at least as an opinion I know once you boot into recovery via fastboot is SUPPOSED to work that way, never did for me hence my weird method. Wiping partitions may not have any logic to you sir, but to some of us it does back from the OG EVO days, that's what devs there used to post, that's what I've gone with as a routine for myself.
I've known peeps who attempt the ROM first boot then reflash boot.img after- endless powercycle. Never happened when I tried it but eh
4EXT wasn't always around so I guess I'm still trying to get used to easier flashin on this phone. I enver used smart flash on this one because when I was S-ON I did it the fastboot method, then the Unknown Force method came to be and I never had a need for it.
Evo 3D on Boost S-off but problems with ICS ROMs
Background:
EVO 3D (CDMA) flashed to Boost Mobile. Sept 2011
Rooted HTC Method Oct 2011
ROMs ROMs ROMs until about 6 months ago (currently using Eternity Infected Rom 1.4.2)
Tried to go to ICS and had problems so did S-off wire trick Aug 2012 (Lost Boost Mobile flash) Had to reflash to Boost.
Now:
****Unlocked****
Shooter XC Ship S-OFF RL
HBOOT 1.50.0000
baseband 97.10.0808
I'm in a quandry at this point of what to do next.
I'm not able to successfully load any of the new ROMs. I tried just upgrading to Infected ROM 2.0 but it also always has issues like it forces me to use skype or email won't open. I'm guessing it is because I load my old data from Titanium backup and it isn't compatible. I tried Mean ROM and it works and changes my kernel but I don't like it as it is full of Sprint Bloatware which does me no good on Boost. I've tried to load the latest Viper ICS ROM and it just stays stuck on the HTC screen.
Running ICS rooted S on
flashed "Official jb ruu 3.15.651.16 Odex. zip" using TWRP it said it was successful. Went back to reboot system. The phone got to the htc quietly brilliant screen, then went black. I got a few white bars to pop up on the top of the black screen then nothing.
I then went in and flashed "boot img flasher v1.2 jb.zip" it failed until I cleared the D-cache, then it passed. Back to the reboot screen. reboot system and it did the same thing.
I then recovered ICS and rebooted and the phone is back to the old system
What am I missing?
Would it be easier to take the OTA version and then root to S off?
I've never bothered with RUU's but if I'm not mistaken you have to re-lock your bootloader and run the RUU through the bootloader, not recovery.
With some of the threads popping up about people having issues with the new JB RUU, you might be better off finding a rooted JB ROM, like MeanBean, and run that, instead. You'd be better off getting S-off, then upgrading.
Sent using my HTC EVO LTE and a magic wand
jchtcusre1 said:
Running ICS rooted S on
flashed "Official jb ruu 3.15.651.16 Odex. zip" using TWRP it said it was successful. Went back to reboot system. The phone got to the htc quietly brilliant screen, then went black. I got a few white bars to pop up on the top of the black screen then nothing.
I then went in and flashed "boot img flasher v1.2 jb.zip" it failed until I cleared the D-cache, then it passed. Back to the reboot screen. reboot system and it did the same thing.
I then recovered ICS and rebooted and the phone is back to the old system
What am I missing?
Would it be easier to take the OTA version and then root to S off?
Click to expand...
Click to collapse
If you're s-on, retry flashing...(wipe everything and start over)..you're gonna have to flash jb Roms twice (as long as they are the zip format ones to my knowledge)...s-on is causing the kernel to take 2 flashes to install....first flash will install the kernel and then after that is successful, reflash without wiping anything and the Rom should boot....its a known procedure/hurdle for s-on users...hope that explains the bootloop. Let me know if it works...
Sent from my EVO using xda app-developers app
onefasttreopro said:
If you're s-on, retry flashing...(wipe everything and start over)..you're gonna have to flash jb Roms twice (as long as they are the zip format ones to my knowledge)...s-on is causing the kernel to take 2 flashes to install....first flash will install the kernel and then after that is successful, reflash without wiping anything and the Rom should boot....its a known procedure/hurdle for s-on users...hope that explains the bootloop. Let me know if it works...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
This is true with MeanBean due to how the kernel installs. You have to basically flash the ROM twice when you're S-on. Some ROM's have a S-on kernel installer, while others don't.
I still say get S-off, upgrade your firmware and install a rooted JB ROM.
Sent using my HTC EVO LTE and a magic wand
Than
Thank you both, I'll give that a try and see what happens. I wished I could have found that info earlier Been reading and messing with this phone for Hours.
Umm boot img flasher is a windows program that you run on a windows pc. You have to extract all the files out of the zip. NOT flash it on your phone. What hboot do you currently have?
Nope still not there. I tired flashing the rom 5 times and although I got to the second HTC quietly Brilliant screen, it still just goes black. I think I'll look into the dirty racun or lazy panda since I'm still at 1.12 h boot.
jchtcusre1 said:
Nope still not there. I tired flashing the rom 5 times and although I got to the second HTC quietly Brilliant screen, it still just goes black. I think I'll look into the dirty racun or lazy panda since I'm still at 1.12 h boot.
Click to expand...
Click to collapse
Did you do a clean install wiping cache/del cache/system/ factory reset then flash the rom?
What version of twrp are you using? v2.3.3.0 is the latest version
Btw RUU's are .exe files not .zip files AFAIK
Since you're on Hboot 1.12, flashing the kernel separately isn't an issue like it is with the newer Hboots. That being said, it sounds like your issue lies elsewhere. Make sure you've got a good download (verify MD5 checksum) and make sure you wipe properly. For me, I'd wipe cache and Dalvik, factory reset and wipe system (this will wipe your current ROM from your phone), then flash the new ROM. Once you've flashed the new ROM, don't wipe anything in recovery, just go ahead and reboot. I'd definitely look at going S-off, as already stated.