Has anyone noticed that cpu now keeps running at max frequency after upgrading to ics?
Cpu spy reports that my phone runs at maximum frequency for 44% of the time.
Sent from my LT26i using xda premium
This is quite normal, the system is heavy on the CPU.
just after flashing? it might take 2 hours to settle in... I had the same issue
Related
is keeping your min. speed at 600 mhz bad or a battery drainer??
I keep mine at 480 min and 806 max with governor at on demand
Sent from my Bloodfire LG-VM670 using xda premium
You can gain some battery life by putting your min lower, but the most your going to gain is a half hour to an hour, and that is the high end, and it all depends upon your usage.
Is overclock make battery drain?
are you overclocking ? as in are you using frequencies higher than 998MHz?
pheel said:
are you overclocking ? as in are you using frequencies higher than 998MHz?
Click to expand...
Click to collapse
i overclock to 1113MHz
Sent from my X10i using xda premium
Yes sure it will consume more battery if you overclock it,but better performance
derrickrs said:
Yes sure it will consume more battery if you overclock it,but better performance
Click to expand...
Click to collapse
thank for ur answer
Sent from my X10i using xda premium
That's not 100% correct. if you download an app like CPU Spy you can monitor how much time your phone spends on each CPU state. unless you do a lot of gaming and other CPU intensive activity your phone will spend most of it's time in lower CPU states. unless you specify that you want it to run at 1113 MHz at all times which yeah, would kill your battery faster. just looking at CPU Spy on my phone OC'd to 1228 MHz it has spent 70 hours in Deep sleep and 25 hours on 245 MHz. only 3 hours at 1228 MHz.
So unless you do CPU intensive things on your phone you shouldn't notice an overly dramatic change in battery life.
Ive been running the "cm7-1.4highpro-test-rev3" kernel and it runs great. I've been bumping up my undervolting slowly, and im at -475 at 216 mhz, which (in theory) should be the undervolt clock speed that will save me most battery becasue i have phone set to go between 216 mhz and 312 mhz when screens off. Ive got both 216 and 312 mhz undervolted extremely heavily and i haven't seen ANY issues. The rest of clock speeds are at -100 or so, and if i push much further than that the phone locks up and does weird stuff. This would lead me to believe that the undervolting IS indeed working. But can the processor really run at -475 @216mhz and [email protected] without any side affects?? I haven't once had it get stuck in sleep mode with screen off or ANYTHING, so im a bit unsure if it is actually undervolting or not.. Myrt undervolt shows that my phone is undervolted to the specific settings i set within SetCpu. I also havent seen much, if any, difference with battery life. With 10 hours of idle time, straight idle screen off whole time, wifi, gps, mobile data, 4g, bluetooth, all that stuff off and after 10 hours my battery is down to 85%.
I limited uv clocks, so there is a low limit. One day ill add more low end clocks but it won't matter because the photon uses a separate clock for suspend. I knew people would try to uv to 500 with it set on boot and screw there phone up. So this way I didn't have thousands of user error related uv issues. Uv does works but its more for high end than low end. Low end uv causes sleep of death.
w0lf215 said:
Ive been running the "cm7-1.4highpro-test-rev3" kernel and it runs great. I've been bumping up my undervolting slowly, and im at -475 at 216 mhz, which (in theory) should be the undervolt clock speed that will save me most battery becasue i have phone set to go between 216 mhz and 312 mhz when screens off. Ive got both 216 and 312 mhz undervolted extremely heavily and i haven't seen ANY issues. The rest of clock speeds are at -100 or so, and if i push much further than that the phone locks up and does weird stuff. This would lead me to believe that the undervolting IS indeed working. But can the processor really run at -475 @216mhz and [email protected] without any side affects?? I haven't once had it get stuck in sleep mode with screen off or ANYTHING, so im a bit unsure if it is actually undervolting or not.. Myrt undervolt shows that my phone is undervolted to the specific settings i set within SetCpu. I also havent seen much, if any, difference with battery life. With 10 hours of idle time, straight idle screen off whole time, wifi, gps, mobile data, 4g, bluetooth, all that stuff off and after 10 hours my battery is down to 85%.
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
haha ok I understand, just thought I was going crazy there for a bit, or had the most amazing tegra 2 known to man. is there a way to UV the suspend mode then or no? And is my battery life at idle about average or low considering the UV. do you have any kernels for CM7 that aren't limited for UV? Thanks for reply, and all your hard work on the photon!!
Sent from my MB855 using XDA App
Changing suspend voltage can only be done in source. I havnt played with it yet because i need to test it on a stable kernel that way i know any issues would come from it. As far as extra uv steps its planned after wifi fix. I wont add 500 new steps probably 2 steps at a time(-25 steps). Im also planning on changing my clock table(multiples of 216 only). I might make a half step 1.0 kernel underclocked to 108~192. It will be mem underclocked and gpu/avp underclocked. With lower voltage tables on everything. Default scheduling will be powersave. Which you can check out with cpu master right now. That kernel will also have a tweaked 2 core start/stop.
w0lf215 said:
haha ok I understand, just thought I was going crazy there for a bit, or had the most amazing tegra 2 known to man. is there a way to UV the suspend mode then or no? And is my battery life at idle about average or low considering the UV. do you have any kernels for CM7 that aren't limited for UV? Thanks for reply, and all your hard work on the photon!!
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
"That kernel will also have a tweaked 2 core start/stop. "
Holy ****!
That would be the best thing
All new ones this week have tweaked 2nd core
DethMetalz69 said:
"That kernel will also have a tweaked 2 core start/stop. "
Holy ****!
That would be the best thing
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Im building a battery version of top secret now
Sent from my MB855 using XDA App
Just finally got around to rooting my USA SGP 5.0 yesterday and download SetCPU 2.24. I set the max clock to 400MHz but noticed that it would periodically jump up to 800MHz. Am I to conclude that it is not properly setting the max speed? ie. not doing anything at all?
thanks!
No, this is normal for this device. When you touch the screen, the driver or the kernel increase the speed to 800MHz, but when you let it go, it will jump back to whatever you set in SetCPU. The driver or kernel overwrites the settings, this is done by Samsung to increase the responsiveness of the device. There's nothing you can do about it.
Interesting... So I want to be able to set a profile so that when the screen is off, the max speed is 200MHz. I am assuming that listening to music does not require the CPU to be clocked at max speed. That said, do we know if the CPU automatically clocks down when not needed? If it does, then does that mean that SetCPU is doing nothing to help with battery life?
I don't know how well the CPU clocks down when not needed. Run some tests with and without caping the CPU and see what SetCPU shows you in terms of clock speed. I have SetCPU on my device because i like to set exact limits to my CPU and not rely on some algorithms to figure it out.
It seems to work whenever I switch the governer to ondemand. Conservative, not so often.
Sent from my YP-G70 using xda app-developers app
If you can buy tegrac overclock..you can undervolt any FQ and overclock how many you want.
Sent from my Nexus 7 using xda app-developers app
Nevermind... I just uninstalled SetCPU. I had set it to max out at 400MHz. I surfed the web for a while and then watched youtube for 1.5 hours and noticed that I dropped from 70% to 45% battery life. I've never seen my battery drain so fast, even when watching full movies. I might give Tegrak a try but I think I'm done with SetCPU for now...
My phone is overclocked. but i always lower Maximum Mhz of it to 1113Mhz or lower by useing SetCpu. so i need to know even if i lower the processor speed will my battery drain because my phone is overclocked.
Overclocking will drain battery more, undervolting less
It will unless you also undervolt....undervolting and overclocking on the same time sends the phone in another dimension and without losing to much juice.
Sent from my GT-I9300 using xda app-developers app