Help!!! Have a Galaxy S3 rooted and CM installed. I installed Omega rom coming from stock ICS. I did not wipe cache or factory reset. After install it will not boot whatsoever. Tried using odin to recover with no luck. I'm afraid I bricked the phone already. How do I boot from power of to at least get to CWM?
spdrasr3 said:
Help!!! Have a Galaxy S3 rooted and CM installed. I installed Omega rom coming from stock ICS. I did not wipe cache or factory reset. After install it will not boot whatsoever. Tried using odin to recover with no luck. I'm afraid I bricked the phone already. How do I boot from power of to at least get to CWM?
Click to expand...
Click to collapse
well its almost impossible to brick a phone by doing what you said...
so, to boot to download mode its volume down, home and power
to boot to CWM directly its volume up, home and power.
Wait,
When you say stock ICS, do you mean the stock Samsung ROM or do you actually mean Vanilla ICS such as AOSP / AOKP / CM9?
When you say Omega ROM, do you mean the Stock Samsung based one, or teh AOKP one?
Be aware that system settings stored in /data for a stock samsung rom will not work well (probably preventing boot) on a vanilla AOSP/AOKP/CM rom and vice versa.
Please clarify exactly what ROM you are coming from and what ROM you have flashed.
i failed to mention I tried both button combinations and nothing is working
Have you tried starting fresh from a battery pull?
Take the battery out for a few minutes then re-insert it. See if the combinations work then.
well if you phone is giving you no sign of life at all the nits not looking good.
Tell us exactly what you did, because from the little you told us above there is no way you have bricked.
I was coming from the stock Samsung ICS 4.0.4 to Omega v3 rom if that helps
i'll try the battery pull. I tried it earlier similar to the Droid X recovery from power off
spdrasr3 said:
I was coming from the stock Samsung ICS 4.0.4 to Omega v3 rom if that helps
Click to expand...
Click to collapse
Please give us a step by step of what you did, exactly - including what buttons you pressed and when.
Please try not to leave anything out.
Also try removing the battery like I said.
...and.... When you sya it does nothing, do you mean nothing? No scvreen, no button back lights, no vibrations?
Have you tried pulling the SD card?
Sent from my GT-I9000 using XDA
what happens when you put the power cable in?
Got the Galaxy S3 on thursday. Left completely stock until yesterday. Yesterday I rooted the phone and installed CWM using odin. The phone was working fine. Downloaded Omega rom v3 overnight. Before installing the rom did a nandroid backup. Installed the rom but without doing a factory/data reset or partition format. Clicked on the radio button to finish install where is said it should reboot. Waited a while as I know new roms can initiallly take longer to boot. Then the phone never rebooted. Next I tried both button combinations several times with no response from the phone. Now I can get the LED to light up while attached to a charger that's it. My PC doesn't even see it as a drive or as a device now. I had a HTC EVO before this and installed many ROM with no problem like this and felt comfortable enough to do the S3.
Any help would be greatly appreciated at this moment.
if i plug the cable in the computer recognizes something put still doesn't see the device
keep trying the download mode combo
hold volume down and don't let go
hold home and don't let go
hold power until you see life - don't let go of the other two!
if I ever do see life again then what next?
spdrasr3 said:
if I ever do see life again then what next?
Click to expand...
Click to collapse
when your in download mode you can flash a stock rom back with odin
okay thank you.
I've had stuck boot and no recovery and had to remove micro sd before I could get into recovery or download mode.
no life...looks like i'll have to return it
yeah i removed the sd card thinking the rom was on it. No luck. How'd you get yours to recover?
Related
Hey guys. I've been an Android & XDA user for a while now, so this question shouldn't be about a nooby-sitiuation.
My friend bought an AT&T Samsung Galaxy SII (SGH-i777) this week. I've been trying to flash CM7 ever since. I got the rooting done, the properly recovery (with no signature / "abort" problems)
The rom seems to keep bricking the phone. Its simply unflashable. I seen tons of people on XDA who got it to work, with barely any serious problems. I troubleshooted the problem myself, and its simply just the CM7 roms. I would do a full wipe, and then install the rom like I would on my other Android phones, and the installation is successful. When it boots, it gets stuck on the Galaxy SII boot screen (not the splash/boot animation screen) and it would stay on it with a yellow warning triangle on the bottom.
I tried flashing other roms, like Cognition X2, and they worked. Its just CM7 on this phone... which is odd because CM7 is usually stable (nightlies aside.) Especially since the 7.1 stable version was recently released. Anyone can help me get the rom up and going? Would be highly appreciated.
did you try to wipe dalvick cashe as well when you wiped data?
I just flashed it tonight myself and all I did was reboot into CWM and did a Wipe data/factory reset and then Wipe cache partition. After doing that, I simply flashed the cm7 zip file that was loaded on my internal sd. Rebooted and no problems.
I didn't have ANH ISSUES installing it but I know I read that some.people bad to flash it twice initially. So flash it, then when it goes back to the recovery screen flash it a second time. I also remember users on the international SGS2 bad to do the same thing. Most have no issues but I think they found that it depends on what you used to root your phone (on the SGS2 internationals) and I THINK some had to do the same here. Try it and if it works just hit the thanks button.
Sent from My KickAss CM7 Galaxy S2
if you flash it and get stuck in a bootloop, just pull the battery, and 3-finger back into recovery to flash the rom again.
keep doing this until you get it up and running - took me a few times, including a couple of battery pulls.
How do you boot into recovery? I know On the SGH-i777 you have to hold the Vol down+back+power to get to the Download mode, but I tried everything to get to the recovery itself.
Boobie Watcher said:
did you try to wipe dalvick cashe as well when you wiped data?
Click to expand...
Click to collapse
Yes. I've flashed many roms before, this seems to be the only one I had ever seen a problem with.
mfpearson said:
if you flash it and get stuck in a bootloop, just pull the battery, and 3-finger back into recovery to flash the rom again.
keep doing this until you get it up and running - took me a few times, including a couple of battery pulls.
Click to expand...
Click to collapse
Word.
Edit: To boot into recovery vol up+vol down+power
Had the same problem. Read somewhere to install the ROM twice in a row in CWM without rebooting inbetween. Worked like a charm.
Thanks for the feedback guys. I'll try this in the morning once I get my hands on the phone again.
Saw this type of behaviour on occasion with cm7 on my aria. Sometimes caused by a bad download of the rom. Did you verify md5s ?
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Don't forget to do a master data clear /reset before trying to boot the new CM7 rom for the first time - clear out the old stuff. Works perfectly here.
Sent from my SGH-I777 using xda premium
I'm having the same issue. I'm getting signature errors when trying to flashCM7.1 stable. I've downloaded it two times now with the same problem. My question is, I'm trying to flash from on the phone itself, storing the zip in the download dir on the phone as I don't have an sd card. Will this even work? I've tried looking around and all I can find is flashing from an sd card. I can get one, I just haven't yet.
squigge said:
I'm having the same issue. I'm getting signature errors when trying to flashCM7.1 stable. I've downloaded it two times now with the same problem. My question is, I'm trying to flash from on the phone itself, storing the zip in the download dir on the phone as I don't have an sd card. Will this even work? I've tried looking around and all I can find is flashing from an sd card. I can get one, I just haven't yet.
Click to expand...
Click to collapse
That's the way I did it. Put the update in the same folder on the internal SD card. I can't even access my external SD card from CWM.
Sent from my SGH-I777 using xda premium
Hmm, I'm not sure what I'm doing wrong then. I did a factory reset, and wiped the cache and get the same thing. I know it wiped because now I have nothing setup on the phone when I boot normally. Suggestions?
Quit downloading the CM7 builds for the International Galaxy S II. They will NOT work. That is why it fails. Look for the Galaxys2ATT build.
Sent from my SGH-I777 using xda premium
I got the build by going to the cm7 website, looking by device, finding the galaxy s 2 and grabbing the stable one. So perhaps that is the incorrect one and I'll look closer for one that has att in it, whenever the site isn't going up and down. They seem to be having issues today.
Make sure you're installing the version located in this thread...
http://forum.xda-developers.com/showthread.php?t=1297568
Specifically this link
Double flash made it work. Thanks guys. + thanks for telling me how to boot into recovery lol. Great rom.
Sorry for the newb issues, it was the wrong version. I got the att version from the thread previously mentioned and that worked perfectly. Thanks!
Hi Guys,
Last night for some reason my GT-19100T running CM9.1.0 wouldn't lock by pressing the power button, the button itself seems to be working. I can press the button down but nothing happens. I left it for the night and came into work this morning, I thought it might be a bug with the rom, i managed to boot into recovery via the "Rom Manager" app and was going to flash to CM10. My problem is now that i am in recovery, I can't select anything as the power button is not working. I can scroll through the recovery menu with the volume buttons but cant select anything, and now soon as the phone turns on after removing the battery, it goes straight to recovery mode and i cant get around it.
I have tried leaving the battery out for about 3 hours and same thing. I can boot into download mode, But at the moment that doesn't help me.
Any suggestions on what i can do? I'm not worried about warranty so i may pull the phone apart and clean it tonight. Thanks in advance.
Update:
After much playing around with the button i can get it work, it is very temperamental and requires to be pushed in the right way. Was able to flash with Touch recovery and am now updating to CM10 nightlies. Thanks all for your help on my first post.
SirBigBird said:
Hi Guys,
Last night for some reason my GT-19100T running CM9.1.0 wouldn't lock by pressing the power button, the button itself seems to be working. I can press the button down but nothing happens. I left it for the night and came into work this morning, I thought it might be a bug with the rom, i managed to boot into recovery via the "Rom Manager" app and was going to flash to CM10. My problem is now that i am in recovery, I can't select anything as the power button is not working. I can scroll through the recovery menu with the volume buttons but cant select anything, and now soon as the phone turns on after removing the battery, it goes straight to recovery mode and i cant get around it.
I have tried leaving the battery out for about 3 hours and same thing. I can boot into download mode, But at the moment that doesn't help me.
Any suggestions on what i can do? I'm not worried about warranty so i may pull the phone apart and clean it tonight. Thanks in advance.
Click to expand...
Click to collapse
Hi!
First, have you tried flashing a stock firmware? If that does not help, you can try cleaning your hardware.. it may be dusty or something.. be careful! I hope you get this sorted out.
Also, i hope my suggestion will help you out, cheers!!
Sent from my GT-I9100 using xda premium
First, have you tried flashing a stock firmware?
I am currently flashing back to xxlpq via odin and see if that changes anything. Will post back with results.
Thanks.
SirBigBird said:
First, have you tried flashing a stock firmware?
I am currently flashing back to xxlpq via odin and see if that changes anything. Will post back with results.
Thanks.
Click to expand...
Click to collapse
Okay, will wait for your feedback
Sent from my GT-I9100 using xda premium
Okay, Flashed back to stock ICS rom, Got a little bit further but still no go. It gets the "S" loading screen and stays there, Still cant do factory reset via Android Recovery as it also needs the power button to select. Someone suggested installing CWM touch recovery but i cant find a .tar version of "recovery-clockwork-touch-5.8.1.5-galaxys2" downloaded from CWM website. Any suggestions on how i can install this without using recovery? Thanks.
SirBigBird said:
Okay, Flashed back to stock ICS rom, Got a little bit further but still no go. It gets the "S" loading screen and stays there, Still cant do factory reset via Android Recovery as it also needs the power button to select. Someone suggested installing CWM touch recovery but i cant find a .tar version of "recovery-clockwork-touch-5.8.1.5-galaxys2" downloaded from CWM website. Any suggestions on how i can install this without using recovery? Thanks.
Click to expand...
Click to collapse
I guess you have to flash them with odin..
1. Flash a stock firmware to get you out of bootloop
2. Flash the latest siyah kernel cause it's a touch recovery via odin as well
Do you want me to post the links or will you find it yourself?
I hope this helps, cheers!
Sent from my GT-I9100 using xda premium
Noob here, please bear with me:
Updated my I577 to ICS, then rooted it using this thread: http://forum.xda-developers.com/showthread.php?t=1806118
Worked like a charm, then I picked up ROM Toolbox Lite from PlayStore, which worked fine until I tried to change themes.
Somehow, it got to where boot was stuck at vendor logo. Unfortunately I did not Nandroid backup in time, but I was able to do a Kies backup before rooting, so not worry about the data loss at this time.
Used CWM5, did davlik & cache wipes, factory resets several times, no dice. No stock ROM available so I tried this:
http://forum.xda-developers.com/showpost.php?p=30444507&postcount=6
(flashed system tar through ODIN) Hanged at "system.img.ext4".
Here's where I'm at now:
-- Boot looping at second Samsung logo
-- ODIN 1.85 still reads device at port
-- Battery indicator visible when plugged in & power off.
-- Still able to get to cwm recovery 5.5.0.4
So, IS IT SOFT BRICKED OR HARD BRICKED?
Bonus Question: Is it unbrickable?
Any input or answers are GREATLY appreciated, and a fix will most likely be monetarily compensated through Paypal.
Black-wolf, j3r3goss, or shabbypenguin if you see this, your input is certainly appreciated as well!
Its soft bricked. Hard brick means there is no life at all and won't even power on (through software).
Any soft brick is unbrickable, the only nonunbrickable brick is a hard brick (which is rare)
Sent from my MB508 using xda premium
If you can get into Clockwork Mod Recovery still then select wipe data (Do this twice), then select whipe cache (Do this twice), next select factory reset (Do this twice), finally go back and select reboot system. This should unbrick your phone for you
Sent from my SCH-I535 using xda premium
shimp208 said:
If you can get into Clockwork Mod Recovery still then select wipe data (Do this twice), then select whipe cache (Do this twice), next select factory reset (Do this twice), finally go back and select reboot system. This should unbrick your phone for you
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
This.
If you can get into recovery you're only in shallow water
Sent from my MB508 using xda premium
Something's changed
THANKS so far for the input!
I was able to nandroid out of the loop, but now it's back to my original problem--it keeps booting to the "Rethink Possible" AT&T screen & freezing.
Any ideas? I'm thinking I'm gonna be outta luck until I get my hands on a legit Gingerbread Stock tar.
Did you whipe cache, whipe data and preform a factory reset like we suggested? Preforming a nandroid restore won't get you out of your phone hanging on the at&t logo.
Sent from my SCH-I535 using xda premium
Samsung Galaxy Ace GT-S5830i brick
hey there im a noob to all this but i registered to see if someone here could give me advice.
i tried to flash a new rom on my phone (see title) and it doesnt do a thing anymore...
i rooted it and tried to put Retribution beta_2 on it and itlooked to be working till it rebooted..
all i got was the startup screen with galaxy ace gt-s5830i.
i looked around and i found that i could use download mode and odin 1 click download to put in a new rom.
so i tried that and it looked to be working but it stalled at end of install and now it doesnt even turn on anymore...
HELP!!!
hope someone knows whats up and can give me some advice.
i hope i didnr hardbrick it like i saw in this thread...
Emil.warm said:
hey there im a noob to all this but i registered to see if someone here could give me advice.
i tried to flash a new rom on my phone (see title) and it doesnt do a thing anymore...
i rooted it and tried to put Retribution beta_2 on it and itlooked to be working till it rebooted..
all i got was the startup screen with galaxy ace gt-s5830i.
i looked around and i found that i could use download mode and odin 1 click download to put in a new rom.
so i tried that and it looked to be working but it stalled at end of install and now it doesnt even turn on anymore...
HELP!!!
hope someone knows whats up and can give me some advice.
i hope i didnr hardbrick it like i saw in this thread...
Click to expand...
Click to collapse
Are you able to get into recovery mode? Did you flash a custom recovery such as TWRP or Clockwork Mod Recovery?
Samsung Galaxy Ace GT-S5830i brick -
shimp208 said:
Are you able to get into recovery mode? Did you flash a custom recovery such as TWRP or Clockwork Mod Recovery?
Click to expand...
Click to collapse
Hi thanks for your response to my problem,
yes i flashed a custom recovery from clockwork and i rooted it. i cant get in to recovery mode.
after i did that i tried flashing custom rom like i said before but after reboot it didnt do anything.
i just got the startscreen and found that i could use download mode and odin to flash original rom.
i used 1 click downloader from Odin and it started to recover my rom,but at the end it stalled.
after that happened i couldnt do anything anymore.
i thought it was totally dead but i just saw that when i connect to my comp it says unknown device..
im an idiot for trying this stuff without the knowledge..it looked easy in descriptions
but i found different descriptions how to do it..
i cant put links in my posts yet cause i am new..
i used the 1st one.. but after that didnt work i found that other 1 and that is little different...
.android.gs/update-galaxy-ace-s5830i-retribution-gingerbread-2-3-6
.technostall.com/samsung-galaxy-ace-s5830i-installing-retribution-custom-rom-firmware
i hope i have given you enough info
greets Emil
Hmm today i found out smth new,i installed some samsung drivers and now my phone is recognized as a samsung android phone-android composite adb interface its says in device mananger on my laptop.
All Fixed!
shimp208 said:
Did you whipe cache, whipe data and preform a factory reset like we suggested? Preforming a nandroid restore won't get you out of your phone hanging on the at&t logo.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I did all that, but the one thing that finally nailed it was formatting my internal SD. I also formatted my external one, but I don't even think I put it back in the phone.
So, if anybody's reading this in the future, and you're still stuck after wiping the cache, wiping Davlik & performing factory reset,
FORMAT THE SD!
And flash this through Odin: http://forum.xda-developers.com/showpost.php?p=31765274&postcount=59
Huge thanks to j3r3goss!! :good::good::good:
Main Exhilarate thread here:
http://forum.xda-developers.com/showthread.php?t=1926253
Soft bricked my galaxy s4
gagdude said:
Its soft bricked. Hard brick means there is no life at all and won't even power on (through software).
Any soft brick is unbrickable, the only nonunbrickable brick is a hard brick (which is rare)
Sent from my MB508 using xda premium
Click to expand...
Click to collapse
Hey, total noob here but Im having problems with my Galaxy S4 so I was on this thread looking for a fix.I have an AT&T Galaxy s4 (SGH-I337) and I just rooted my phone and installed clockworkmod recovery. I went to backup and then when I rebooted it freezes at the AT&T logo. Ive wiped data/factory reset, wiped caches, etc ive done everything and it freezes at the same spot. I have no ROMS as I had just rooted, just stock 4.2.2. Then I saw a vid on how to unroot/unbrick and it was working perfectly until it went to reboot.(I downloaded 4.2.2 firmware for my model phone) I used ODIN and it said pass then when it was rebooting it froze in the exact same spot (also instead of the normal bootup it still had the "custom" and an unlocked lock that Ive had since I rooted) and now I cant enter recovery mode. It starts booting but then freezes when the blue letters come on! Now even when I try to turn it on normally it freezes at the samsung logo (with unlocked lock and "custom")Please help! I would greatly appreciate it!
Hey all
For some reason today my phone has just started randomly locking up. Was running a nightly build of Cyanogen mod from Mid January. Never had any issues with it today.
Ive basically done a complete wipe of the system (/system, data, cache, dalvik, SD card, etc) and installed a newer nightly of Cyanogen mod, but it is still happening. Thinking it may be a hardware problem...
Any ideas as to how i can check whats going wrong?
Symptoms:
- Screen completely freezes on what it was doing. Screen state stays the same too (doesnt dim after a while)
- Haptic touch buttons sometimes work and sometimes dont (if they do work, all they do is vibrate, nothing changes on the screen)
- Tried a few button combinations to try and get it to respond again. Only way to get it goign again is to reboot the system completely (holding Power + Home)
Thanks
Dan
Sudden Death Syndrome?
Sent from my GT-I9305 using XDA Premium HD app
Twitchel said:
Hey all
For some reason today my phone has just started randomly locking up. Was running a nightly build of Cyanogen mod from Mid January. Never had any issues with it today.
Ive basically done a complete wipe of the system (/system, data, cache, dalvik, SD card, etc) and installed a newer nightly of Cyanogen mod, but it is still happening. Thinking it may be a hardware problem...
Any ideas as to how i can check whats going wrong?
Symptoms:
- Screen completely freezes on what it was doing. Screen state stays the same too (doesnt dim after a while)
- Haptic touch buttons sometimes work and sometimes dont (if they do work, all they do is vibrate, nothing changes on the screen)
- Tried a few button combinations to try and get it to respond again. Only way to get it goign again is to reboot the system completely (holding Power + Home)
Thanks
Dan
Click to expand...
Click to collapse
have u intalled a samsung based rom and checked that all your hardware is working?
Is that a thing? I've had it lock up around 20 times today i would say...
Havent tried going back to a stock rom. Might give that a go tonight and see what happens... Thanks for the suggestion mate.
edit: deleted
(repeat post)
Havent tried going back to a stock rom. Might give that a go tonight and see what happens... Thanks for the suggestion mate.
Twitchel said:
Havent tried going back to a stock rom. Might give that a go tonight and see what happens... Thanks for the suggestion mate.
Click to expand...
Click to collapse
Back to stock rom, still happening...
Could this be a hardware issue?
Twitchel said:
Back to stock rom, still happening...
Could this be a hardware issue?
Click to expand...
Click to collapse
Same thing happened with mine. Right before it died
Twitchel said:
Back to stock rom, still happening...
Could this be a hardware issue?
Click to expand...
Click to collapse
last option :- backup internal storage. do a megawipe. install any samsung based rom again.
if that also does not work. bring phone back to full stock i.e there should be no proof that u used custom roms and then try to get samsung to exchange it. sorry.
lefttobleed said:
last option :- backup internal storage. do a megawipe. install any samsung based rom again.
if that also does not work. bring phone back to full stock i.e there should be no proof that u used custom roms and then try to get samsung to exchange it. sorry.
Click to expand...
Click to collapse
Yeap, i've done a full wipe of everything (SD card and all) and its still happening..
Ill be calling Telstra to try and get a replacement
Twitchel said:
Yeap, i've done a full wipe of everything (SD card and all) and its still happening..
Ill be calling Telstra to try and get a replacement
Click to expand...
Click to collapse
not full wipe. megawipe. from here http://forum.xda-developers.com/showthread.php?t=1832326
hope your s3 is the international version I9300.
If not then u r in the wrong section and installing non compatible roms and mods, that could be the cause of all this.
Hi, i Think i soft bricked my sgh-i717. i can start the phone but it will not pass the samsung logo. i can not get into recovery mode and when i try to get into reocvery mode it just viberates and shuts off. i can get into download mode but it wont stay in download mode and shuts off and viberates.
this all started by me wanting to change roms. ive frist started by flashing to Liquid-JB-v2.0-RC7-quincyatt using cwm. it started to lag so i decided to switch roms. i factory wiped and used darkside super wipe and then flashed to Padawan Jelly Bean ROM + Phase Kernel using cwm. it didnt work at frist. i forgot to back up my stock and liquid jelly bean rom. so i couldnt go back. :/ so, i found a stock rom ( Android 4.0.3 IML74K.UCLD3) and installed it using odin. after installing the stock rom. i used cwm recovery to make a back up of the stock rom and then flashed to the padawan jelly bean rom using cwm. the rom was messing up so i went back into recovery mode and restored the stock rom. when i go try to restart the phone that's when the problems start to occur.. i hope this enough for somebody to help me..
chinonyno3263 said:
Hi, i Think i soft bricked my sgh-i717. i can start the phone but it will not pass the samsung logo. i can not get into recovery mode and when i try to get into reocvery mode it just viberates and shuts off. i can get into download mode but it wont stay in download mode and shuts off and viberates.
this all started by me wanting to change roms. ive frist started by flashing to Liquid-JB-v2.0-RC7-quincyatt using cwm. it started to lag so i decided to switch roms. i factory wiped and used darkside super wipe and then flashed to Padawan Jelly Bean ROM + Phase Kernel using cwm. it didnt work at frist. i forgot to back up my stock and liquid jelly bean rom. so i couldnt go back. :/ so, i found a stock rom ( Android 4.0.3 IML74K.UCLD3) and installed it using odin. after installing the stock rom. i used cwm recovery to make a back up of the stock rom and then flashed to the padawan jelly bean rom using cwm. the rom was messing up so i went back into recovery mode and restored the stock rom. when i go try to restart the phone that's when the problems start to occur.. i hope this enough for somebody to help me..
Click to expand...
Click to collapse
Sounds like you may have a stuck power button. That happen to me. Try tapping it multiple times fast. Or flicking the back of the phone by the power button with your finger.
440bro said:
Sounds like you may have a stuck power button. That happen to me. Try tapping it multiple times fast. Or flicking the back of the phone by the power button with your finger.
Click to expand...
Click to collapse
thank you. it worked.
chinonyno3263 said:
thank you. it worked.
Click to expand...
Click to collapse
Glad to hear your problem was solved.
THANKYOU Soo MUCH
440bro said:
Sounds like you may have a stuck power button. That happen to me. Try tapping it multiple times fast. Or flicking the back of the phone by the power button with your finger.
Click to expand...
Click to collapse
dropped my phone without a case today and i wouldnt let me into recovery, this help a lot man
boyboy1222222222222222 said:
dropped my phone without a case today and i wouldnt let me into recovery, this help a lot man
Click to expand...
Click to collapse
I'm really glad to hear your phone survived the drop! Thanks for clicking the thank button and letting us know we helped you solve your problem. I appreciate it.
boyboy1222222222222222 said:
dropped my phone without a case today and i wouldnt let me into recovery, this help a lot man
Click to expand...
Click to collapse
Can you go back to the thread you started, put [SOLVED] in the title
Then in the op describe how you fixed it or better yet post a link here?