I’m extremely new to the Android community and I did do a lot of reading on how to unlock, install a recovery, and install ICS on my HTC Rezound. The problem I’m having is that I found an ICS ROM to install. I downloaded it, renamed it PH98IMG.zip, installed it onto my SD card through Clockworkmod Recovery, I then tried rebooting into the bootloader to get the zip file installed, but this is what happens in bootloader:
SD Checking…
Loading…[PH98DIAG.zip]
No image!
Loading…[ph98diag.nbh]
No image or wrong image!
Loading…[ph98img.zip]
And there’s a vertical progress bar on the right side of the screen that fills up, but then nothing happens after that. It goes back into the bootloader screen. Now my phone won’t startup at all, I get stuck at the HTC white startup screen. I can get into bootloader and Clockworkmod recovery, but nothing else works.
If anybody can please help me with step by step instructions I would really really really appreciate it. Thanks.
I should also mention that I followed a YouTube video on how to install ICS on my Rezound (I can't post a link of the video b/c XDA website won't let me).
The video had me unlock the bootloader, install CWM recovery, and install something called Ineffabilis-Deus-v1.0.1-Odex.zip. Everything up to this point worked just like the video (which is point 3:30 on the video). After that, nothing else worked.
I've ended up formatting the SD card from CWM recovery so now there's nothing on the SD card. Not even the PH98IMG.zip file. PLEASE PLEASE HELP!
If you still have ADB set up after you unlocked, here's whatchya do.
1. Unzip the P98 file.
2. Move the boot.img into your ADB directory.
3. Plug your phone into your computer.
4. Run CMD as administrator and type in the following commands
adb reboot bootloader
fastboot flash boot boot.img
Should work just fine after that. :good:
And I really hope you are at least using the modded CWM recovery from this post and elsewhere, you'll have issues if your phone fully drains otherwise:
http://forum.xda-developers.com/showthread.php?p=27517554
Worry about reflashing recovery on its own after you get the ROM up and running, just be sure you keep the phone charged. And consider AmonRa or TWRP recovery.
Chyrux said:
If you still have ADB set up after you unlocked, here's whatchya do.
1. Unzip the P98 file.
2. Move the boot.img into your ADB directory.
3. Plug your phone into your computer.
4. Run CMD as administrator and type in the following commands
adb reboot bootloader
fastboot flash boot boot.img
Should work just fine after that. :good:
Click to expand...
Click to collapse
YES! It worked! THANK YOU SO MUCH! Now to figure out how to get Amon Ra installed and uninstall CWM Recovery.
You can download Amon Ra from this post
http://forum.xda-developers.com/showpost.php?p=23781936&postcount=428
rename img file to recovery.img and flash using fastboot as below
fastboot flash recovery recovery.img
fasheezy said:
YES! It worked! THANK YOU SO MUCH! Now to figure out how to get Amon Ra installed and uninstall CWM Recovery.
Click to expand...
Click to collapse
Dowload this: http://www.mediafire.com/?5yemc20dcnbr91c
Rename to PH98IMG and install via boot loader.
fasheezy said:
I’m extremely new to the Android community and I did do a lot of reading on how to unlock, install a recovery, and install ICS on my HTC Rezound. The problem I’m having is that I found an ICS ROM to install. I downloaded it, renamed it PH98IMG.zip, installed it onto my SD card through Clockworkmod Recovery, I then tried rebooting into the bootloader to get the zip file installed, but this is what happens in bootloader:
SD Checking…
Loading…[PH98DIAG.zip]
No image!
Loading…[ph98diag.nbh]
No image or wrong image!
Loading…[ph98img.zip]
And there’s a vertical progress bar on the right side of the screen that fills up, but then nothing happens after that. It goes back into the bootloader screen. Now my phone won’t startup at all, I get stuck at the HTC white startup screen. I can get into bootloader and Clockworkmod recovery, but nothing else works.
If anybody can please help me with step by step instructions I would really really really appreciate it. Thanks.
Click to expand...
Click to collapse
My Rezound has the exact same screen when going to the bootloader. I tried so very hard to avoid this but it must be done, I have to ask for help. I have no idea how to fix this phone. When trying to boot it gets all the way to the 4GLTE screen and stops, forever.
This phone is rooted with an unlocked bootloader, S-On, using Hasoon2000's AIO. It was working fine up until I did something stupid and loaded Motioncoding's Beats audio installer. (In case you're wondering I did this in an attempt to have the Beat's audio function while using Pandora, unfortunately this stopped the stock music player from functioning with headphones, I'm and idiot, I know...)
The problem occurred once I tried to uninstall the beat's audio installer using Root Browser Lite and deleting the system files they specified in the instructions. Apparently I deleted one to many and upon restart this is where I ended up. I have tried numerous fixes but the problem I keep running into is I cannot get access to Android via a USB connection on my PC. I still have access to the bootloader and to Clockworkmod Recovery but that is it. If someone can explain to me how to fix this it would really make me feel better and I promise I will never try to do something this stupid again. Thanks.
Board
Did you create a nandroid backup as recommended before trying any new mods? If not, reflash your rom in recovery/boot.img in fastboot, with only a system wipe. If so, restore your nandroid, if you don't boot then reflash a proper boot.img in fastboot.
Yeap snuzzo is spot on. I just wanted to add that it's not a big problem at all, not even something to stress about. We will help you get it fixed up. If you have the vertical loading var, there's a PH98IMG.zip file on the external sd card that you need to delete.
Since it was mentioned in the quote, make sure you aren't running the official clockwork mod recovery. Either run amon ra or fly halfs custom clockwork mod
Sent from my ADR6425LVW using xda premium
Related
i have been searching these forums for the past few days and have come up dry.. i have an htc rezound and I want the OTA BUT i have perm rooted it and removed most (if not all) the bloat... how do i go about rebloat and relocking my phone? i have tried using cleantool and it keeps waiting for the phone or it just fails all over itself repeatedly
edit: i have it set to charge only, sync is off and closed, and it is in fastboot mode. I have also tried something I found on here which seems like it is very similar to cleantools with less functionality and it just says <waiting for device> indefinitely
twich12 said:
i have been searching these forums for the past few days and have come up dry.. i have an htc rezound and I want the OTA BUT i have perm rooted it and removed most (if not all) the bloat... how do i go about rebloat and relocking my phone? i have tried using cleantool and it keeps waiting for the phone or it just fails all over itself repeatedly
edit: i have it set to charge only, sync is off and closed, and it is in fastboot mode. I have also tried something I found on here which seems like it is very similar to cleantools with less functionality and it just says <waiting for device> indefinitely
Click to expand...
Click to collapse
There are a few different ways to do it. Easiest way I did it to make it foolproof, is flash stock recovery if your on a custom recovery and relock phone and run the RUU. It will put you back to stock and you can just download the OTA and update it, then Unlock and flash Amon Ra recovery and from the developer menu install SU and superuser to reroot.
If you need more instructions , just ask otherwise to me that was the easiest way.
P.S. Just be aware the internal SD card gets wiped after you unlock again so move anything off the internal SD to the external SD that you want to save prior to unlocking again.
I didnt take the ota, I used cons ota rom.. this was my steps for that
1) download rom from here http://forum.xda-developers.com/showthread.php?t=1467329
2) boot into recovery, flash rom....
here you can go two ways, if you dont want the new baseband, it will flash the ph98img and not do anything, if you want the new radios I will tell you how I did it, then tell you where you need to start if you wont want them.
3)perform nandroid
4)via adb (thing you used to unlock originally) fastboot oem lock YOU ARE NOW LOCKED.
5)boot into hboot it will flash the ph98img
6) Unlock bootloader (find the email with the unlock.bin code and follow those instructions)
7)Reboot phone
8)connect to pc, charge only usb debugging enabled
9)run one click root
Proceed with this if you get the mainver error ONLY otherwise if having wifi issues, proceed to step 13
10) after rooted follow this post http://forum.xda-developers.com/showthread.php?t=1467099 NOTE, op in the thread supplied his miscnew.img USE IT!
11)Read this thread http://forum.xda-developers.com/showthread.php?t=1459347&highlight=mainver it will explain how to get the ph98s to work.
11a) do the ph98 file thing to the ph98 img in amon ra to get it to flash in bootloader
12) after amon ra is restored, perform restore nandroid.
If wifi is not working, even if you dont have mainver issues do step 13
13) If having wifi issues as in not working go to this thread http://forum.xda-developers.com/showthread.php?t=1467793 and follow instructions EXACTLY!!!
Now you should be running new radios, hb2.11, the 2.6 kernel etc.
You will have to follow the post in step 11 to get any ph to work from now on.
I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE, BURN YOUR HOUSE DOWN OR ABDUCTED BY ALIENS BY FOLLOWING THE ABOVE INSTRUCTIONS.
im having some trouble getting into recovery because clockworkmod says it does not have an officially supported recovery... how do i manually install one?
Assuming you installed a recovery, just boot to Hboot. Pull the battery, then hold the power button and volume down button. Once in Hboot you can choose Recovery.
twich12 said:
im having some trouble getting into recovery because clockworkmod says it does not have an officially supported recovery... how do i manually install one?
Click to expand...
Click to collapse
To flash a recovery do the above steps to get into hboot (power down, pull battery, hold volume down and power buttons) and once you are in hboot, choose fastboot. Then connect to your pc and in the pc cmd prompt type:
fastboot flash recovery nameofrecovery.img (name of stock recovery you need to download, trying to find a link for you...)
That will put the stock recovery on the phone, then you can run RUU to get the rest back to stock and you can then accept the OTA.
feralicious said:
To flash a recovery do the above steps to get into hboot (power down, pull battery, hold volume down and power buttons) and once you are in hboot, choose fastboot. Then connect to your pc and in the pc cmd prompt type:
fastboot flash recovery nameofrecovery.img (name of stock recovery you need to download, trying to find a link for you...)
That will put the stock recovery on the phone, then you can run RUU to get the rest back to stock and you can then accept the OTA.
Click to expand...
Click to collapse
got it! OTA and everything.. debating on rerooting for a bit thanks a lot everyone! +rep
All you have to do to reroot now is flash Amon Ra and then install su from within that. So it's super easy at this point.
su seems to have remained installed.... no root but su is definitely still installed! the only reason i am going to wait on rerooting is so i can learn more about it before i flash or anything
Yeah, it will show up in your apps but it doesn't work properly until you reinstall. I thought I had remained rooted but when I went to use Titanium Backup it couldn't get root access, then after I reinstalled su it worked fine.
But yeah, if you don't need it yet don't worry about it. The only good reason to do it is to use TiBU to save all your settings and if you have Amon Ra you can make a nandroid of your phone so that if something happens you have a backup image of everything and can restore it very easily via Amon Ra. You can still stay on stock ROM etc... the only thing you would need to flash is the Amon Ra recovery.
ya i see what you mean... I also want to get rid of this unbelievable amount of bloat... geez their are a ton of useless verizon apps never mind the stupid games
Guys,
I followed this guide to unlock my phone and gain superuser access step by step:
http://forum.xda-developers.com/showthread.php?t=1239821
I then installed Rom Manager, and restarted in Recovery.
I placed this zip: http://forum.xda-developers.com/showthread.php?t=1421065 onto my SD Card, and did not rename it. Once in recovery I installed that ROM. It installed with no errors however now the phone gets stuck at the htc logo screen.
Any thoughts?
What was contained that .zip file you flashed, and did you make a backup of your system before you flashed?
Sent from my Droid Razr Maxx
Did you wipe data cache and dalvik? If not wipe again. If it bootloops again try pushing the kernel with fastboot.
Sent from my PG86100 using Tapatalk
The .zip contains the following files:
data
devices
kernel
META-INF
sdcard
system
CHANGELOG
check_data_app
mike, can you tell me how to push the update with fastboot, I'm kind of new to all of this telephone wizardry
I can get into FASTBOOT/HBOOT/RECOVERY, however nothing I do seems to help me get past the HTC Logo. Any thoughts? Maybe I'm not waiting long enough? Can someone please tell me exactly what I need to do (if I can even do something). I might just be approaching this whole process the wrong way.
Do I install a ROM from ZIP from Recovery? Do I need to fastboot an .img file first?
Sounds like your hboot 1.5 and your phone is hanging due to you need to place a copy of your recovery in your adb folder...
The while in Hboot
Using adb with phone plugged in and debug turned on
fastboot boot recovery.img
Then wipe and flash the rom you were trying to flash...
You can't just flash a rom with recovery since your s-on
Two methods
One is fastboot boot recovery.img which is easy
Other is boot.img pain in the ass
I tried booting directly into recovery like you just said. I am using TWRP recovery.img file.
Can this be caused by the type of ROM that I am trying to install?
Everything works fine, the .zip gets applied and seems to install correctly, but it still hangs at the htc logo.
I also forgot to mention that originally I used Clockwork Recovery Mod, which i got from the market, and selected the option to boot into recovery. I don't know if that makes any difference.
You should Google shooter ruu. Get back to stock. Retry this with another shot at reading the instructions.
You must plug your phone into pc while in fastboot and give it a command to boot recovery recovery.img .
Then reflash a rom.
Read more I'm hboot 1.4 and I can still flash a 1.5 hboot correctly cause I've read how to.
Sent from my PG86100 using Tapatalk
If u haven't figured it out yet, see if this helps:
[Guide] My Hboot 1.50 HTC Unlock/recovery/rom/kernel flashing notes http://forum.xda-developers.com/show....php?t=1495358
If u have updated your phone to the newest radio in the 2.17.651.5 update you may have problems if the Rom is based on an earlier kernel/radio like I think Warm is, but I could be wrong.
You may have flashed the Rom incorrectly & not had the kernel get flashed causing the boot loop.
Sent from my "Up all night, sleep all day" Evo3D via Tapatalk.
so hey guys. just got an evo, and did the regaw root method where it unlocks the loader using HTcunlocker. and it also installed the twrp. i downloaded the cm10 zip and threw it on a sd card.
I put the sd card in, and went and booted into recovery mode... all good. locate zip on the external sd card, and when i try and install it, it fails first step... any suggestions what to do.
I read around and noticed you need s off to do anything that has its own kernel.
seems my hmode is like 1.5 or something so i cant do the s-off. I need to downgrade it. No problem.
bad thing is in the recovery i went to do a wipe facory reset, and now when i try and boot to system it says NO OS found! haha i power it down and back on, and it says no os found!
I cant use an RUU or downgrade tool because i cant boot up and into debugging,
i know you clever people can help me out a bit, right?! i miss my epic 4g slider
EDIT STILL NEED HELP please and thank you in advance
http://forum.xda-developers.com/showthread.php?t=1869377
Pay attention to the S-On part of that article. You have to flash the kernel separately with S-On. Also there is now a method of downgrading in order to achieve S-Off. It can be found in the original development subsection.
it seems like i downloaded a RUU with 1.3, but the problem is, it says it cant connect to the phone. i didnt install any drivers or anything. so point blank, since this was a newer phone, I need to download a livecd of linux in order to get this thing to boot to anything other then the white htc screen or twrp?
You need to get into twrp by holding power and volume down . Once there wipe everything except storage. Then mount USB and copy/paste a Rom from your pc to your phone. Pull the boot IMG first and place where your adb/fastboot files are.
Flash the Rom, when its done boot into bootloader from recovery and then fasyboot flash the boot IMG
There are detailed instructions on how to do these steps all over XDA
Hope you get it up and running
I don't know if you need those drivers you talked about. If you wanted to be sure about having the correct drivers you could install HTC sync on your pc.
Sent from my EVO using xda premium
Ok let me read into that push/pull adb fastboot thing.
corcgaigh said:
You need to get into twrp by holding power and volume down . Once there wipe everything except storage. Then mount USB and copy/paste a Rom from your pc to your phone. Pull the boot IMG first and place where your adb/fastboot files are.
Flash the Rom, when its done boot into bootloader from recovery and then fasyboot flash the boot IMG
There are detailed instructions on how to do these steps all over XDA
Hope you get it up and running
I don't know if you need those drivers you talked about. If you wanted to be sure about having the correct drivers you could install HTC sync on your pc.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
ok so go into twrp. then from my rom zip file, youre saying to pull out the boot.img and place in the fastboot folder (not sure)
then flash the whole zip file of the rom (with or without the boot.img that i copied) and then you say boot into bootloader and than fastboot flash the boot.img? im kinda lost right there
So As i just woke up and ready to try again with this bastard phone, can you link me to something stating how to actually flash a rom using s-on htcunlock? or just how and where you put the boot img and where the fastboot folder is etc.
Best thing to do probably is read om4's guide in the Q&A section. Its stickyed or maybe download flash image gui. The app explains the process. Its any easy solution for s-on folks.
Sorry i cant explain in detail how to fastboot flash the boot img but all the info easily found on xda.
Sent from my EVO using xda premium
So when i try to send the image using fastboot, i do fastboot devices, and then i try and send. it says sending, but will stay there infinitely. I cant find a thread that talks about it locking up during the file transfer
Maybe I'm missing something here but couldn't he put a rom like meanROM ,that has the s-on kernel installer built in, onto his sd card (assuming he has one) and install it from TWRP just so he has a working phone? Then he could properly research how to get CM10 installed and running.
edit.... so I somehow miraculously now have it working again.... installed amon-ra recovery, then unsuccessfully flashed Neo, but was able to get Ecliptic Rez to work... can't seem to delete this thread though...
Hi,
So I was running the most recent RUU re-locked, S-on.
I went through the unlock process successfully, then got TWRP on my phone (not even sure how this worked... was using the Rezound all-in-one tool, it didn't seem to work properly the first time, but was able to pull up TWRP through Recover later on) then used TWRP to flash SuperSU and was rooted. Then feeling cocky I went ahead and did a clean wipe (note: I was very dumb and never setup a Restore... I thought, oh everything is going great, I'll just flash real quick, no reason to create a backup.... lesson learned haha) and tried to flash Ecliptic Rez. The first time it didn't work... it almost instantly said it was "installed" but didn't work. I tried to Flash it again, this time it looked good, took a while to install, everything looked great. I rebooted and the EclipticRez splash screen came up.... but then it stayed up, and it's still up. I can go back to recovery/hboot/whatever.
If it matters I pretty much flashed Ecliptic with all the options as default (except I chose S-on)...
I also tried just now to flash NeoMax2.0 but this is stuck at the splash screen as well. I tried to flash this rom first by having it as PM98IMG.zip on my root, but it didn't seem to install properly (it went through an initial phase on hboot for about a minute then went back to the hboot screen. So I then flashed it using TWRP, it said it was "injected successfully" (or something like that) but then when I rebooted it went to the splash screen and is stuck there...
If it matters too, my phone is "unlocked" and "tampered" on hboot.
My questions are...
Where should I go from here?
I really don't wanna mess with S-OFF..
I'm trying to learn more about amon-ra recovery but it's gonna take a while for me to digest all that info.
Could it be a TWRP issue in some way?
Any help/ideas would be greatly appreciated, thanks!
For future reference, since you are s-on (as am I) you need to flash the kernel after the ROM.
Some ROMs you have to pull the kernel out and do it in fastboot, or some, like Ecliptic, will put a PH98IMG on your sd card and put you in hboot after the ROM flashes. Then you accept the update if it doesn't start automatically and it will flash the kernel and then you should be able to boot.
You shouldn't need to rename the ROM to PH98IMG, just select flash zip in recovery and navigate to it.
feralicious said:
For future reference, since you are s-on (as am I) you need to flash the kernel after the ROM.
Some ROMs you have to pull the kernel out and do it in fastboot, or some, like Ecliptic, will put a PH98IMG on your sd card and put you in hboot after the ROM flashes. Then you accept the update if it doesn't start automatically and it will flash the kernel and then you should be able to boot.
You shouldn't need to rename the ROM to PH98IMG, just select flash zip in recovery and navigate to it.
Click to expand...
Click to collapse
That's dead on! Thank you. That was the difference I noticed. I'm not sure why, but amon-ra after flashing EclipticRez sent me back to hboot and there I realized that I was supposed to do another step, and at that point I thought, hey this might work this time lol
Out of curiosity.... so you say some ROMs have you "pull the kernel out" - what exactly does that mean? Would I have to download (or perhaps just located the kernel in the SD card) and change that to PH98IMG and put it on SD Root so it loads that update in hboot? Thanks
Since I download everything to my pc then transfer to my phone, what I do is just look in the ROM zip file in explorer and then copy the boot.img out of it into my fastboot folder. Then I just flash it from there using:
fastboot flash boot boot.img
There's probably a way to get it out using Root Explorer or ES File Explorer, but I don't know how you would put it into a PH98IMG file on the phone.
I avoid PH98IMG files whenever possible. Those could be anything packaged up into a file named PH98IMG and I feel safer flashing something using the real name. Would hate to use the wrong PH98IMG file by accident and do something I regret later.
feralicious said:
Since I download everything to my pc then transfer to my phone, what I do is just look in the ROM zip file in explorer and then copy the boot.img out of it into my fastboot folder. Then I just flash it from there using:
fastboot flash boot boot.img
There's probably a way to get it out using Root Explorer or ES File Explorer, but I don't know how you would put it into a PH98IMG file on the phone.
I avoid PH98IMG files whenever possible. Those could be anything packaged up into a file named PH98IMG and I feel safer flashing something using the real name. Would hate to use the wrong PH98IMG file by accident and do something I regret later.
Click to expand...
Click to collapse
Ok cool, so you'd flash your ROM first using the command prompt, then after the ROM has finished installing and you're back in hboot you would then flash the boot.img (aka Kernel right?)?
Flash the ROM in recovery - on the phone, not fastboot. I just download to my pc and store everything there then copy what I need to my phone when I want. So when I flash a ROM I copy it to my sd card to use in my phone.
Then you may or may not have to flash the kernel in fastboot. Only need to use fastboot if the ROM doesn't make a PH98IMG file for you and put it on your sd card. If it does make one I believe it will put you in bootloader and ask you if you want to update and you just select yes with no need to use pc.
I want to flash this: http://forum.xda-developers.com/showthread.php?t=2400838
But I don't have 4EXT, and as far as I can tell in order to install it I need to install the .apk from here (http://www.4ext.net/) and run it as root.
The problem is, apps won't run as root. If I try to update the superuser app it says it fails to get root.
I've got the SOS X rom on there now, twrp 1.1.1 recovery, and HBOOT-1.58.5858
It's S-OFF.
I also tried flashing a stock root rom to see if I could get superuser to work, but it had the same problem. And I've tried a couple different HBOOT versions.
Any help would be much appreciated!
First and foremost, that ROM wont work with Hboot 1.58. that Hboot version works best with Sense-based Roms, but it doesnt play nice at all with JB Roms. flash Hboot 1.04. sense-based Roms will still work. its the most used Hboot for the Evo 3D.
Second, you can flash the recovery from boot loader if you have the proper zip file. if not, you can also flash it from your computer using fastboot.
i am not sure why your root does not work. it could be a file system error. i can't tell.
anyways, ill guide you on flashing the Hboot and the recovery.
Hboot: (you know this already, but just in case )
BACKUP BEFORE PROCEEDING
take the Hboot file i included, and rename it to PG86IMG. after the rename the file Should be just PG86IMG.zip
put the file in the root of your Phone's SD card
turn off your phone, or remove the battery, or anything.
boot your phone into boot loader by pressing and holding Vol- + Power till you see the boot loader screen.
it will seach for a PG86IMG file to install. it will find the file you dropped into the SD card.
it will ask you if you want to install it, fallow the on-screen instructions to select yes.
it will install
afterwards, it will tell you to hit power to reboot or something like that.
after that delete the PG86IMG file from your sd card, or else it will prompt you to install it again when you use Hboot the next time
this is the same procedure for any and all Hboots. if you need another version later on, go to http://forum.xda-developers.com/showpost.php?p=30014044&postcount=7
Recovery:
BACKUP BEFORE PROCEEDING
now, if you find the recovery itself in a zip file, you can install it from boot loader by renaming it to PG86IMG and doing exactly like the Hboot.
i only have the img, so i will tell you how to do that.
from a computer, you will search for the android SDK. its about 100mb. hopefully youre using Windows, and if so, there is a mini SDK that is really small. this mini SDK contains what will allow you to use Fast Boot and ADB.
Here you can find the mini SDK http://androidforums.com/faqs/443072-adb-guide-updated-12-05-2011-a.html
take the folder sdk-tools and put it on the root of your hard drive or anywhere. put in the folder the recovery.img file i included
open cmd on windows, or terminal on linux. type in "cd C:\sdk-tools" if on windows.
hit enter. after that type fastboot and hit enter and see if something comes up. if it doesnt, you got the path wrong. i cant really go into much detail explaining this is coming out of my memory so excuse me.
after you do get the path right, just boot your phone into boot loader, select fastboot, plug your phone to your computer and you should see Fastboot USB on your phone screen highlighted in red.
after that just go to the command window on your pc, and type "fastboot flash recovery recovery.img" no, theres no typo there. if you get lost, let me know and ill help you out
hopefully you will stay with 4ext since it performs better than twrp. at least in my case.
once it finishes installing youre done. you have 4ext and an Hboot version that works with the Rom you want to install.
now to the Root access problem.
try flashing a rooted rom, see if it works. if it doesnt, or you already tried. then try wiping everything and reflashing.
if still no go, then let me know and ill see how i can help you.
Thanks so much! This is exactly what I needed.
Sent from my Nexus 4 using xda app-developers app