battery caliberation - Galaxy S II Q&A, Help & Troubleshooting

hi
is it required to battery caliberate after flashing new rom?
and when ever i reboot my system either battery jumps from 10% to 30 or more
or becomes less than 10%..
if i should then which app should i use?
any guidnace
plz
TY

No such thing. After you flash a new rom, charge the phone to 100%, turn it off, remove the battery for 30 seconds, replace the battery, turn phone on, enjoy.
Anyone selling you the whole calibration thing is selling you voodoo.

hi
thanks for your reply
plz suggest me best battery app with battery saving feature , suggestion on what we can do with remaining battery , expected full time charge , complete graph or battery usage history by apps?
paid or free , tell me best one
thank you

There's lots of battery apps on Google Play, there's no such thing as the best one, go have a look under the Tools section in Apps (you'll also find some under productivity). Stay away from apps like Juice Defender that claim to save you battery by doing things automatically which you can do yourself in two seconds, these have been proven time & again on XDA to use more juice than they save.

ivl try battery monitor
thank you

No probs ;-)

MistahBungle said:
No such thing. After you flash a new rom, charge the phone to 100%, turn it off, remove the battery for 30 seconds, replace the battery, turn phone on, enjoy.
Anyone selling you the whole calibration thing is selling you voodoo.
Click to expand...
Click to collapse
Wouldn't that procedure above be considered calibrating the battery? LOL. J/K. Couldn't resist .
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

@up
actually it cannot. this way you only help the system in your phone recognize full capacity of battery (which is not even full because not one battery works at it's full capacity - but it's fullest you will get at this point of your battery life). when it's about calibrating - listen to MistahBungle - it's all voodoo. you cannot calibrate li-ion battery unless you kill it and then revive. by killing it I don't mean depleting it in your phone, because even when phone shows the battery is fully depleted it's really not - there is still some juice in it. you'd have to use e.g. special charger which can drawn juice out of battery and make it really empty. only then your battery is dead and useless. you may revive it by applying cca. 5V but actually it not always works. so you cannot calibrate your battery in home environment.
what you can do is "re-calibrating" so called fuel gauge (description under links given below) and you may also help your system recognize the real state of your battery charge. sometimes it happens that systems readings are wrong and battery is on 85% but system is reading it as 50 or 100%. to help it read battery chip correctly you do the thing MistahBungle so helpfully described. sometimes you even don't have to do it but wait 2-3 charging cycles and system will adjust it's reading itself. by charging cycles I mean charging like from 20-100%. why not from 0%? because even if it's not a real depletion state, li-ion batteries doesn't like the state of being discharged too much.
more on this and lot of other helpfull information you will find here:
http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries
http://www.androidpolice.com/2010/1...bump-charging-and-inconsistent-battery-drain/

gaeilge said:
@up
actually it cannot. this way you only help the system in your phone recognize full capacity of battery (which is not even full because not one battery works at it's full capacity - but it's fullest you will get at this point of your battery life). when it's about calibrating - listen to MistahBungle - it's all voodoo. you cannot calibrate li-ion battery unless you kill it and then revive. by killing it I don't mean depleting it in your phone, because even when phone shows the battery is fully depleted it's really not - there is still some juice in it. you'd have to use e.g. special charger which can drawn juice out of battery and make it really empty. only then your battery is dead and useless. you may revive it by applying cca. 5V but actually it not always works. so you cannot calibrate your battery in home environment.
what you can do is "re-calibrating" so called fuel gauge (description under links given below) and you may also help your system recognize the real state of your battery charge. sometimes it happens that systems readings are wrong and battery is on 85% but system is reading it as 50 or 100%. to help it read battery chip correctly you do the thing MistahBungle so helpfully described. sometimes you even don't have to do it but wait 2-3 charging cycles and system will adjust it's reading itself. by charging cycles I mean charging like from 20-100%. why not from 0%? because even if it's not a real depletion state, li-ion batteries doesn't like the state of being discharged too much.
more on this and lot of other helpfull information you will find here:
http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries
http://www.androidpolice.com/2010/1...bump-charging-and-inconsistent-battery-drain/
Click to expand...
Click to collapse
read that ..
thank you
and is there any way to stop auto startups of apps?i have around 200apps and most of them i use around once a day or not even once
i use android assistant to manage startup but it does on boot and after some time if i check running apps most of apps will be there running
is there any app to block it running automatically? not just at startup ? full control like anything?
thank you

actually I cannot help with that. I don't use such a software and really don't believe in it. but, the fact is that I do not use so many apps. other fact is that surely there is some useful software that could help you with that task, i just do not use one and personally I'm not interested in it. I know that perhaps the best method is to freeze them with titanium but if you use these apps from time to time then it would become complicated and not worth the effort.
still I have few questions:
why would you like to stop them from working? do they drain your battery? if so then check your logs with bbs and find out which ones are draining, try to change their setting or get rid of them, or at least close only these ones. long time ago I was fighting with some apps that I do not use often and they start themselves from time to time. I didn't want to get rid of them, so before every night I was killing them one-by-one from applications menu (actually most of them didn't wake up until I ran them myself). finally, after many tests I got to the point that it doesn't make any difference. apps I was killing, even if running, didn't use any recourses, didn't produce wakelocks, they were just using some RAM. and if it is the reason of your concern then do not be worried - they may use as much RAM as they want - android will free RAM when it will need it.
now I do not kill any apps and by night I lose 0-2% of battery which is my only concern - what should we care more? CPU, RAM - let it work as long as it doesn't stop us from enjoying our phone and make a usage of it uncomfortable.
and if you're worried about packet data then you may limit it for each app using system menu in ICS.

ancilary said:
read that ..
thank you
and is there any way to stop auto startups of apps?i have around 200apps and most of them i use around once a day or not even once
i use android assistant to manage startup but it does on boot and after some time if i check running apps most of apps will be there running
is there any app to block it running automatically? not just at startup ? full control like anything?
thank you
Click to expand...
Click to collapse
Thanks dude. I also have the similar problem. I have spent months on it without any improvement. Now I'm quite frustrated and not optimistic on the solution you have provided towards my issue, but your decription gives me a lot of clue.
But my problem is even more tricky, I would like to share it here so see if anyone have met it before, or if I need to start a new thread to deal with it:
The problem can be generally decribed as below:
1. When the battery is fully charged, unplug and consume the juice until the level reach around 30%, then the phone is shut down automatically; after I plugin the power and restart the phone, the battery level is displayed as 0%;
2. After charging for a while from 0% , restart the phone and you will see the battery level directly goes back to 50%, but still with very low voltage;
3. Changing with a new battery won't solve the issue -- though the new battery itself may also have problem(not sure if it is genuine), but I don't think a fake battery and an old battery should behave almost the same, so I don't think it is the battery's problem; criticize if I'm wrong
4. Re-flashing a new rom won't solve the issue either. I have tried different CM9 nightlies and now I'm using CM10 nightlies, none of them is immune to the problem;
5. Clear the battery state won't solve the problem. It is hard to say whether it improves the situation at least a tiny bit. I mean it may work somehow, e.g. My phone used to be shut down at 50% battery level and now it can last to 36%. But it never totally solve the problem once and for all, so I still don't trust this caliberation thing may work.
I hope I have clearly stated my issue. I'm so at the end of my patience, this little bastard have been always torturing me You guys are the last I can count on I really hope I came here earlier so as not to have wasted so much time.

Related

Saving Battery settings

I want to flash to a newer ROM, but then i'll lose my battery-calibration. I will have a couple of days a real bad battery prestation and my battery will also not get better of it. Doens anyone know how to back-up the calibration and how to put the settings back after a flash?
Philotra said:
I want to flash to a newer ROM, but then i'll lose my battery-calibration. I will have a couple of days a real bad battery prestation and my battery will also not get better of it. Doens anyone know how to back-up the calibration and how to put the settings back after a flash?
Click to expand...
Click to collapse
That is not possible since the ROM has to be trained to the battery. It is really very simple. All you have to do is run the battery dead on the new ROM and then let it recharge and it will be calibrated. There really is no calibration data so much as training the ROM to know your batteries empty state versus full state. The fastest way to run it down is turn GPS on as well as WIFI and BT and leave them on. Your battery should be dead in less then half the day.
Also please do not double post. We see your post and if no one answers then no one answers.
Solarenemy68 said:
That is not possible since the ROM has to be trained to the battery. It is really very simple. All you have to do is run the battery dead on the new ROM and then let it recharge and it will be calibrated. There really is no calibration data so much as training the ROM to know your batteries empty state versus full state. The fastest way to run it down is turn GPS on as well as WIFI and BT and leave them on. Your battery should be dead in less then half the day.
Also please do not double post. We see your post and if no one answers then no one answers.
Click to expand...
Click to collapse
i agree on the first part but disagree on the rest
running the battery dead isnt good for Li-Ion batteries, and for running down the battery dead faster would actually put a lot of stress and heat (if youre connected to data and running very heavy apps that uses either wifi or data, or even A LOT of CPU) on the battery as well, heat is a no no for the battery, just let it down by leaving the backlight on and turning off auto standby, works for me and its going good
read some of this on the bottom, might help you
BigBadger said:
BATTERY SAVING TIPS
The first few days
• Immediately after flashing, you will probably observe very poor battery performance. This is due to the charging circuit having to reset itself.
• The battery meter will not settle down and give accurate readings for a few battery cycles. Give it a few days.
• For the first few battery charging cycles, try to charge to 100% with phone off and then allow battery to drain down quite a bit before recharging. This is so the meter will calculate drain well.
Recommendations
• Make sure you followed all of the flashing instructions to the letter. Especially the part about the hard reset.
• Backlight is set to high. You might want to change that.
• 3G is on by default. Recommendation is to turn it off when you are not surfing the internet.
• Don't drain your batery all the way down until it dies. Not good for these types of batteries.
• The GPS sucks the battery dry. If you want to keep track of yourself, consider something like GPSToday that only wakes up the GPS once in a while.
• Maybe you don't really need aGPS enabled. Disable and check GPS lock times and battery drain.
• Applications that run from the storage card consume more power so install oft-used or background-type applications to main memory.
Troubleshooting
• If your radio does not match your rilphone.dll you can get crazy bad battery drainage. Use the recommended radio or spend some time working out a good combination for your phone/carrier/location/usage.
• Check to see that some application is not still running in the background. Check, do not assume. USe the full Task Manager application.
• Check to see if the screen is still on when you expect it to be off. Soft reset can fix that issue.
• Some radios work better with some carriers and locations. Asking everyone to tell you what radio to use may not give you the best answer. Be specific about your situation.
If you have tried all the above and still can't get over a day with moderate use, you may actually have a bad battery. Try getting a new one that is made by another manufacturer.
Click to expand...
Click to collapse
I'm not sure that it helps (I do it anyway, lol), but I think it's a good idea to flash with the battery fully charged (and maybe plugged in, if you flash off a card).
But when the ROM is trained, it has to save tha calibration data somewhere in it's system? And when you can find dat data, flash a new rom and put that calibration data back, you do not have to train your phone anymiore, right?
If you flash your rom, You should be sure toloose preety much everything of your settings, as far as I know. And so on you wont be taking anything alng (as long as you havent a good backup-tool with you), ...just adjust the settings another time (If they are too many, tell me what you did, maybe I can help my own sttings ^^ (Hate the battaryusage aswell, ...)

[Q] Battery charging quite slow

I got an replacement due to my phone beyond repair.
I'm running original stock firmware, of-course rooted. Since the replacement I'm trying to get my phone to full charge but it doesn't and also I notice that the charging is quite slow.
I installed "Battery Monitor Widget" to see how much power it is drawing and found that AC power draws only about 350+mA and sometimes it is as low as 8mA. (Some times it draws about 750+mA). I notice that the temperature also reaches somewhere about 45 to 48 degree.
Once it reaches about 90% or so, it starts to drain battery instead of charing it.
I find it quite abnormal. Anyone with this kind of problem and found an solution?
Thanks in advance for the replies and suggestions.
What I'd sudjest is updating your phone through seus or PC companion or if your an American at & t user update to a newer firmware through the flash tool (you can find I link to it through my signiture) or if you can't update try and use the repair option through seus or PC compainion.
Sent from my X10 using XDA Premium App
The Gingerbread Man said:
What I'd sudjest is updating your phone through seus or PC companion or if your an American at & t user update to a newer firmware through the flash tool (you can find I link to it through my signiture) or if you can't update try and use the repair option through seus or PC compainion.
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
Thanks for your reply.
I did that yesterday. I repaired the firmware and reloaded all the application one by one from scratch. The only thing I restored is contacts so that I could eliminate all the other factors which can cause this issue.
My other suggestion would be to install xrecovery and wipe your battery stats I guess. You can find a link to xrecovery through the link in my sig
Sent from my X10 using XDA Premium App
The Gingerbread Man said:
My other suggestion would be to install xrecovery and wipe your battery stats I guess. You can find a link to xrecovery through the link in my sig
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
Thanks once again for the reply.
I tired that too every time I try to charge the phone. Still it refuses to complete the charging.
Any other suggestions are welcome.
What about off line charging ie; turning the phone off and doing that way?
Sent from my X10 using XDA Premium App
The Gingerbread Man said:
My other suggestion would be to install xrecovery and wipe your battery stats I guess. You can find a link to xrecovery through the link in my sig
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
+1 it helped me off this problem
Sent from my X10i using XDA App
The Gingerbread Man said:
What about off line charging ie; turning the phone off and doing that way?
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
Good idea. I will try that as well as try to do a clean wipe and just try to charge with nothing loaded in. That will give a better idea where the problem is.
Thanks for the great tip, I will update you tomorrow.
Had that happen before, I had to remove sim card and let it drain out slowly for a week, then charge. Problem solved
I think I had similar problem, except that my processor went on full load when its almost fully charged causing it to drain the battery instead. Still lookin for answer to that, will wiping battery stats help?
I reset my phone to factory and did a re-flashing again using SEUS and I tried it charging immediately without loading any application (only loaded Battery Monitor Widget from Market to see the battery temperature and mA units drawn) and wow, it charged like a normal X10. So I guess it has something to do with whatever I loaded or modded it with.
I'm trying to find it out. Later tonight I will try to load all the application one-by-one and try again to charge to see whether I can isolate it.
During this process, I did takeout my SIM card for a period of 1 hour or so, so not sure whether that did the trick (If that's the case, thanks to gogogu)
In the meantime, I have a strong feeling it would be due to the flashtool and new recovery, but again there isn't any proof. I suspect this because this is the new thing I did compared to my old phone.
Any thoughts are welcome.
Monitor the CPU usage as well
zymphonyx said:
Monitor the CPU usage as well
Click to expand...
Click to collapse
I don't have issues with processor. It works at full throttle when it supposed to work and then goes back to normal.
Hrmmm alright, but if you ever had the draining issue while charging and the battery temp rises up again. Check the CPU usage just incase
After yesterday's event, seems like stable (I did face the same issue once). Not sure which cured it and currently monitoring...
EDIT: Back to square one. The issue started again and the battery refues to fully charge! I'm going mad
Finally given up, sent for service and came back after 5 days of repair.
Repair Notes: No problem found !!!
But today morning I tried to charge and it's the same issue . Makes me go mad. Really, I don't know what to do!
Please help me friends .......
I too have exactly the same problem with my x10i.....
tried everything like rooting, using stock & custom ROMs, etc... still problem persist ...
while charging , power goes from 900mA to 200mA or lower, & doesn't reach 100% full...
i use current widget from market to read the power values ....
please help me friends .... to resolve my problem ...
Thanks a lot...
Makzer.
nobody replying
hello mates...
please reply to my problem dear friends ..
looking forward ...
LiveSquare said:
I got an replacement due to my phone beyond repair.
I'm running original stock firmware, of-course rooted. Since the replacement I'm trying to get my phone to full charge but it doesn't and also I notice that the charging is quite slow.
I installed "Battery Monitor Widget" to see how much power it is drawing and found that AC power draws only about 350+mA and sometimes it is as low as 8mA. (Some times it draws about 750+mA). I notice that the temperature also reaches somewhere about 45 to 48 degree.
Once it reaches about 90% or so, it starts to drain battery instead of charing it.
I find it quite abnormal. Anyone with this kind of problem and found an solution?
Thanks in advance for the replies and suggestions.
Click to expand...
Click to collapse
What program do you use to check your battery temperature. I rememeber there was one that wass bettery draining. The same is also possible with battery level monitor
Sent from X10
Use this tool forum.xda-developers.com/showthread.php?t=1415600
Please read this. There is a lot of batt info on xda just search
http://forum.xda-developers.com/showthread.php?t=871051
I realize that much of this is common knowledge on XDA. Still, every day I see people post about how their phone "loses" 10% as soon as it comes off the charger. I also have friends who can't understand why their battery drains so quickly. Trying to explain this to people without hard numbers is often met with doubt, so I figured that I'd actually plot it out with real data.
So it's not a piece that is optimized for this audience, but I hope that you find it interesting.
--------------------------------------------------
Your Smartphone is Lying to You
(and it's not such a bad thing)
Climbing out of bed, about to start your day, you unplug your new smartphone from its wall charger and quickly check your email. You've left it plugged in overnight, and the battery gauge shows 100%. After a quick shower, you remember that you forgot to send your client a file last night. You pick up your phone again, but the battery gauge now reads 90%. A 10% drop in 10 minutes? The phone must be defective, right?
A common complaint about today's smartphones is their short battery life compared to older cell phones. Years ago, if you accidentally left your charger at home, your phone could still make it through a weeklong vacation with life to spare (I did it more than once). With the newest phones on the market, you might be lucky enough to make it through a weekend.
And why should we expect anything else? Phones used to have a very short list of features: make and receive phone calls. Today we use them for email, web surfing, GPS navigation, photos, video, games, and a host of other tasks. They used to sport tiny displays, while we now have giant touch screens with bright and vibrant colors. All of these features come at a cost: large energy requirements.
Interestingly enough, improvements in battery management technology have compounded the average user's perception of this problem. Older phones were rather inelegant in their charging behavior; usually filling the battery to capacity and then switching to a trickle current to maintain the highest charge possible. This offered the highest usage time in the short-term, but was damaging the battery over the course of ownership. As explained at Battery University, "The time at which the battery stays at [maximum charge] should be as short as possible. Prolonged high voltage promotes corrosion, especially at elevated temperatures."[1]
This is why many new phones will "lose" up to 10% within a few minutes of coming off the charger. The reality is that the battery was only at 100% capacity for a brief moment, after which the battery management system allowed it to slowly dip down to around 90%. Leaving the phone plugged in overnight does not make a difference: the phone only uses the wall current to maintain a partial charge state.
To monitor this, I installed CurrentWidget on my HTC ADR6300 (Droid Incredible), an app that can log how much electric current is being drawn from the battery or received from the charger. Setting it to record log entries every 10 seconds, I have collected a few days worth of data. While many variables are involved (phone hardware, ROM, kernel, etc) and no two devices will perform exactly the same, the trends that I will describe are becoming more common in new phones. This is not just isolated to a single platform or a single manufacturer.
Chart 1 shows system reported battery levels over the course of one night, with the phone plugged in to a charger. Notice that as the battery level approaches 100%, the charging current gradually decreases. After a full charge is reached, wall current is cut completely, with the phone switching back to the battery for all of its power. It isn't until about two hours later that you can see the phone starts receiving wall current again, and even then it is only in brief bursts.
The steep drop in reported battery seen past the 6.5 hour mark shows the phone being unplugged. While the current draw does increase at this point (since the phone is being used), it still cannot account for the reported 6% depletion in 3 minutes. It should also be obvious that maintaining a 100% charge state is impossible given the long spans in which the phone is only operating on battery power.
Using the data from CurrentWidget, however, it is quite easy to project the actual battery state. Starting with the assumption that the first battery percentage reading is accurate, each subsequent point is calculated based on mA draw and time. Chart 2 includes this projection.
Now we can see that the 6% drop after unplugging is simply the battery gauge catching up with reality.
The phone manufacturers essentially have three choices:
1. Use older charging styles which actually maintain a full battery, thereby decreasing its eventual life
2. Use new charging methods and have an accurate battery gauge
3. Use new charging methods and have the inaccurate battery gauge
Option one has clearly fallen out of favor as it prematurely wears devices. Option two, while being honest, would most likely be met with many complaints. After all, how many people want to see their phone draining down to 90% while it is still plugged in? Option three therefore offers an odd compromise. Maybe phone companies think that users will be less likely to worry about a quick drop off the charger than they will worry about a "defective" charger that doesn't keep their phone at 100% while plugged in.
Bump It. Or Should You?
One technique that has gained popularity in the user community is "bump charging." To bump charge a device, turn it off completely, and plug it into a charger. Wait until the indicator light shows a full charge (on the ADR6300, for example, the charging LED changes from amber to green) but do not yet turn the device back on. Instead, disconnect and immediately reconnect the power cord. The device will now accept more charge before saying it is full. This disconnect/reconnect process can be repeated multiple times, each time squeezing just a little bit more into the battery. Does it work?
The following chart plots battery depletion after the device has received a hefty bump charge (6 cycles) and then turned on to use battery power. Note that the system does not show the battery dropping from 100% until well over an hour of unplugged use, at which point it starts to steadily decline. Again, however, it should be obvious that the battery gauge is not syncing up with reality. How could the rate of depletion be increasing over the first 5 hours while the rate of current draw is relatively steady? And why does the projected battery line separate from the reported levels, but then exactly mirror the later rises and falls?
The answer, of course, is that bump charging definitely works. Rather than anchoring our projected values to the first data point of 100%, what happens if we anchor against a later point in the plot?
Aligning the data suggests that a heavy bump charge increases initial capacity by approximately 15%. Note that the only other time that the lines separate in this graph was once again when the phone was put on the charger and topped up to 100%. Just as with the first set of graphs, the phone kept reporting 100% until it was unplugged, dropped rapidly, and again caught up with our projections.
So what does it all mean?
If you absolutely need the highest capacity on a device like this, you will need to bump charge. There are currently people experimenting with "fixes" for this, but I have yet to see one that works. Be warned, however, that repeated bump charging will wear your battery faster and begin to reduce its capacity. If you are a "power user" who will buy a new battery a few months from now anyway, this presumably isn't a concern. If you are an average consumer who uses a device for a few years, I would recommend that you stay away from bump charging. The bottom line is that you don't really "need" to do it unless you are actually depleting your battery to 0% on a regular basis.
If you are someone who can top off your phone on a regular basis, do it. Plug it in when you're at home. Plug it in when you're at your desk. As explained by Battery University, "Several partial discharges with frequent recharges are better for lithium-ion than one deep one. Recharging a partially charged lithium-ion does not cause harm because there is no memory."[2]
Beyond that, the best advice I can offer is to stop paying such close attention to your battery gauge and to just use your phone. Charge it whenever you can, and then stop obsessing over the exact numbers. If you really need more usage time, buy an extended-capacity battery and use it normally.
From my XPERIA X10S v8.2 on JaBKerneL @ 1.15ghz

Wiping battery stats

Interesting article on Rootzwiki:
Wiping Battery Stats is Pointless, Says Google Jan 13 2012 09:30 PM | Ashley Glenn in Articles
Over time wiping battery stats has become a regular ritual among the Android enthusiast community. Buy a new battery? Wipe your battery stats! Upgrade to a bigger battery? Wipe your battery stats! Change kernels or restore a nandroid backup? You know what to do: wipe battery stats! But this ritual may soon become a thing of the past thanks to Google engineer Dianne Hackborn, who sheds a light on the subject that puts the tightly-held practice of wiping battery stats in the same league as carrying a lucky rabbit's foot or throwing a pinch of spilled salt over your shoulder.
Recommending that users wipe their battery stats appears in so many places and as a cure for so many ills that it has become ubiquitous. Adherents to this practice will sit and wait for their phones to report a full charge, then use an app that deletes the batterystats.bin file or reboot into recovery mode and wipe it from there. This supposedly cures a number of ills such as battery scaling issues, poor battery percentage reporting, and any of a myriad other number of issues. The truth is, according to Android Framework Engineer Dianne Hackborn, that this file is a repository for information about system activity and that it actually takes care of itself without the need for user intervention. From Dianne's post:
Quote
This file is used to maintain, across reboots, low-level data about the kinds of operations the device and your apps are doing between battery changes. That is, it is solely used to compute the blame for battery usage shown in the "Battery Use" UI in settings.
That is, it has deeply significant things like "app X held a wake lock for 2 minutes" and "the screen was on at 60% brightness for 10 minutes."
It has no impact on the current battery level shown to you.
It has no impact on your battery life.
Deleting it is not going to do anything to make your more device more fantastic and wonderful... well, unless you have some deep hatred for seeing anything shown in the battery usage UI. And anyway, it is reset every time you unplug from power with a relatively full charge (thus why the battery usage UI data resets at that point), so this would be a much easier way to make it go away.
It really can't be put more straightforward than that, folks. So rest assured next time you put a new battery in or flash a new kernel or restore an old backup that all you have to do to help your phone or tablet play nice with its battery is charge it to 100% and do nothing else. It really is that simple. But don't worry, enthusiasts - you'll find plenty of other reasons to hang out in recovery anyway.
Know of a sweet app, trick, mod, or hack for your Android device? Send us a tip! [email protected]
Sent from my MB870 using xda premium
This is interesting, so Google engineering will incorporate it into new OTA's? Or does this mean I've wasted time while flashing countless Roms?
Pixelation said:
This is interesting, so Google engineering will incorporate it into new OTA's? Or does this mean I've wasted time while flashing countless Roms?
Click to expand...
Click to collapse
I'm reading this as we've been wasting time.
Sent from my MB870 using xda premium
Not wasting time flashing countless roms. Just wasting time wiping battery stats. That's the way it looks to me. Personally, I've always thought wiping battery stats was nothing but a whole lot of voodoo. Never had the need for it, don't see why anybody else would either. Let the flames begin.
I knew it couldn't possibly have an effect on actual battery life, but I thought maybe the file collected information about the length of the battery to calibrate the meter (because let's face it, with the X2 battery bug it's pretty clear that it doesn't get the value directly from the battery).
Funny thing about calibrating when it gets to 100 though...if there truly is something wrong with the meter, why would you suddenly trust it to know when it's charged? This is why I'd always charge it for a little extra and go by the voltage meter.
So basically, I've seen a couple of different readings. I've always waited past 100% and in different ROMs I've seen 4192, 4196, 4198, & 4200 mah.
I use the extended battery, sooooo readings may vary between regular battery.
Pixelation said:
So basically, I've seen a couple of different readings. I've always waited past 100% and in different ROMs I've seen 4192, 4196, 4198, & 4200 mah.
I use the extended battery, sooooo readings may vary between regular battery.
Click to expand...
Click to collapse
I have an extended battery as well. Actually, I have two extended batteries and two regular batteries. Got the first one with my droid X, then a faulty extended battery (bad batch where the meter doesn't read right), then a replacement extended battery, then the one that came with my X2. No two are the same, but they should all max out near 4200 mV.
Edit: I use one extended battery.
Ok this screen is after install of CM 7 tonight, it reads 4205 mah, so why is it different, with different Roms?
Weird isn't it?
Pixelation said:
Edit: I use one extended battery.
Ok this screen is after install of CM 7 tonight, it reads 4205 mah, so why is it different, with different Roms?
Weird isn't it?
Click to expand...
Click to collapse
The stats can easily drift if you don't flash ROMs with your phone at 100% battery, hence why sometimes the calibration is needed [be sure to wipe stats when at 100% [either via app or recovery], best thing to do is fully discharge battery until auto off occurs and then fully charge with AC Wall Adapter and charge only screen, then when it hits 100% wait a few min, restart to OS to be sure it also says 100% [if not wait until it does and wait about 20 min longer] then restart to recovery and flash away [you could also wipe battery stats as part of flash if you do as stated before flashing]. I usually set it up so I fully discharge the phone [restarting to be sure a couple to few times] and then charge with phone off and charge only screen overnight and flash my ROM first thing in the morning right before I unplug it and unplug once I reach the point I am ready to restart device and do initial boot after flashing. Further details below...
Basically charge to 100% [or as absolutely close as you can get it [AC Wall charger is best unless you REALLY are forced to do it via USB and is best to charge via the charge only screen [phone is powered off and not booted in to the OS and all you normally see is just a battery filling on screen [and is fastest way to charge battery]]. Wait an additional 20 - 30 min after it registers 100% [this is to be sure the battery is absolutely topped off essentially] and I will generally do a restart as sometimes the battery may come back to less than 100% on a restart if your phone is not judging the battery right and is in need of calibration. If it does not register after restart wait until it hits 100% and wait the additional 20 min [you can cut out the initial 20 min wait if you want to do the restart to verify just wait the 20 min once you feel sure battery is as topped off as you can get it], then after wiping restart from recovery and unplug. Now be sure to drain the battery until auto shutoff [either stream media if in a hurry or through general usage. Either way wait until auto shut off.]. I usually will power the device back on and be sure it is not going to get back to the OS [if it even gets to boot logo I wait a few seconds and power it on again to be sure all I get is the boot vibrate on my device [some don't have this, but usually it's tablets almost all phones [and definitely both Motorola and Samsung do this]. I then charge it to full [again AC wall charger recommended as above and again with charge only, but as stated if you cant live with phone off or whatever you can do it with OS running as well. You are free to go as you wish after this second full charge really though if you do a couple more [dont have to be insane] it can help ensure the statistics get a good start.
As I believe I stated above the best way to avoid calibration as long as possible is to charge phone to 100% via phone off screen [with AC Adapter and wait the extra 20 min after it registers full before you flash [I will sometimes take it a step further, leave it plugged in while flashing my install zips and then once I go to restart system for the initial boot after ROM flash I will unplug the charger from the phone.
Hope this helps

[Q] Battery has lost capacity

My Nook is 10.5 months old and I have recently noticed it only hold charge for 2-3 hours.
I am still running 1.40 and rooted so I could block OTA. I haven't done any other modifications to the tablet.
Is this a common problem? I need to charge this thing everyday now, where before I could go several days without recharge.
Thanks for the help.
Steve
sgschwend said:
My Nook is 10.5 months old and I have recently noticed it only hold charge for 2-3 hours.
I am still running 1.40 and rooted so I could block OTA. I haven't done any other modifications to the tablet.
Is this a common problem? I need to charge this thing everyday now, where before I could go several days without recharge.
Thanks for the help.
Steve
Click to expand...
Click to collapse
haven't used stock in a long time, but is there an option to turn wifi off when the tablet goes to sleep? ur wifi might be sucking up power continuously if it doesn't shut off.
Yes, that is correct, Wifi can be switch off. And I have done that. But the drain has become very significant.
I am considering going for a warranty repair, but my guess I will get a refurb with another weak battery, and hassled because I have rooted and blocked OTA.
Are most folks just running off their chargers?
If folks have bad batteries are they replacing them themselves?
sgschwend said:
Yes, that is correct, Wifi can be switch off. And I have done that. But the drain has become very significant.
I am considering going for a warranty repair, but my guess I will get a refurb with another weak battery, and hassled because I have rooted and blocked OTA.
Are most folks just running off their chargers?
If folks have bad batteries are they replacing them themselves?
Click to expand...
Click to collapse
you can attempt to request for a new nook tablet placement. After two refurbished replacements with the same problem as my original NT. they sent me a new Nook Tablet and so far so good. It's worth a shot.
Came off the island today and went to the big green city. Stopped at BN and did some talking with them and also to the service center at the same time. The service center said they would send me a refurb. My 3-4hour of run time is way under the 11.5 hours you should get for the e-reader mode only. That fella felt like the battery developes memory and needed to be fully discarded to combat that occurring. I can not find any technical document that supports this idea. There are not NiCad batteries.
Anyway if I send my tablet in I will end up with 1.4.3 instead of 1.4.0.
When you get your replacement
Once you get your replacement, it's a good idea not to charge it until it show very low percentage on any nicad rechargeable batteries. When you charge it, don't remove it from the charger until it reaches 100%. Also don't have a habit of plugin it in when finish using it, plan ahead so that you can have a fully discharge battery before recharging. Your NT battery charge will hold a lot longer threw time if you do it this way. You also can try this app to see if it works.
sgschwend said:
Came off the island today and went to the big green city. Stopped at BN and did some talking with them and also to the service center at the same time. The service center said they would send me a refurb. My 3-4hour of run time is way under the 11.5 hours you should get for the e-reader mode only. That fella felt like the battery developes memory and needed to be fully discarded to combat that occurring. I can not find any technical document that supports this idea. There are not NiCad batteries.
Anyway if I send my tablet in I will end up with 1.4.3 instead of 1.4.0.
Click to expand...
Click to collapse
Good advise, thanks,
I put in some effort to side load the battery stats reset software and found a application call: Battery HD. I loaded this app instead. It provides a graph of the charge and discharge rate. From the graph I can see that my battery is OK. I became aware of some funnies going on when I woke up at 3 am and saw the display on. With the discharge rate as specified I now believe I have some application causing me trouble. I don't have much on the table, Titanium, MX video, Amazon apps.
I shut the unit off last night and it came back right to the same charge. Tonight I will leave it on and check the graph to see if there was an load and when. The application has a gross report on the power used separated by function instead of application. It also has a calibration test that tests the three main functions and reports the discharge rate.
Anyway, I will post what the nightly current hog is if I can find it.
Steve
sgschwend said:
Good advise, thanks,
I put in some effort to side load the battery stats reset software and found a application call: Battery HD. I loaded this app instead. It provides a graph of the charge and discharge rate. From the graph I can see that my battery is OK. I became aware of some funnies going on when I woke up at 3 am and saw the display on. With the discharge rate as specified I now believe I have some application causing me trouble. I don't have much on the table, Titanium, MX video, Amazon apps.
I shut the unit off last night and it came back right to the same charge. Tonight I will leave it on and check the graph to see if there was an load and when. The application has a gross report on the power used separated by function instead of application. It also has a calibration test that tests the three main functions and reports the discharge rate.
Anyway, I will post what the nightly current hog is if I can find it.
Steve
Click to expand...
Click to collapse
My friends NT has been having issue with screen turning on by itself. Seemed to narrow it down to aldiko app. Not sure why it's happening. Performed a clean install of CM7 and issue came back. I keep thinking it's hardware related, trying to convince him to try a different ROM, but he's stuck on using CM7. If you find a reason for your tablet screen turning on let us know so maybe I can help him get his issue resolved. Thanks...
Sent from my AT100 using xda premium
Vector2nds said:
Once you get your replacement, it's a good idea not to charge it until it show very low percentage on any nicad rechargeable batteries. When you charge it, don't remove it from the charger until it reaches 100%. Also don't have a habit of plugin it in when finish using it, plan ahead so that you can have a fully discharge battery before recharging. Your NT battery charge will hold a lot longer threw time if you do it this way. You also can try this app to see if it works.
Click to expand...
Click to collapse
That's actually bad advice for any lithium based battery - like the NT's lithium ion battery. LiON batteries don't like to be fully discharged and they don't like heat, especially heat when they are fully charged. That means avoid full discharges and avoid charging it to full every time, and do charge the battery more frequently (keeping the charge level between 20% and 80% for example). Partial discharge on LiON is just fine; they don't suffer memory effect.
Sent from my GT-I9100 using xda premium
Yeaper
rete said:
That's actually bad advice for any lithium based battery - like the NT's lithium ion battery. LiON batteries don't like to be fully discharged and they don't like heat, especially heat when they are fully charged. That means avoid full discharges and avoid charging it to full every time, and do charge the battery more frequently (keeping the charge level between 20% and 80% for example). Partial discharge on LiON is just fine; they don't suffer memory effect.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have said it in past post, I need glasses. I totally missed this part while reading "There are not NiCad batteries" the word not always gets me.Sorry about that sgschwend. I did not even know, thanks for the info update.
Well, I always appreciate advice, my view is that it becomes a starting point and it is up to the reader to combine it with a working course of action.
As to phantom startup/turnons I checked last night and there wasn't one. I will continue till I find it. The summary screen does say what type of application is turning on so that should help. The only gotcha will be if the battery application changes how the tablet works to the point that the issue will not occur. I don't think this is very likely.
The battery application (battery HD) makes a nice graph so you can look at the slope and see what is going on, it also lists the run time for various activities based on the current battery charge. Interesting to note the Nook charger overcharges a bit and the battery does warm up some. When it cools down the charge is just under 100%. This is not an ideal situation, it would be better for the charger to slow to a point that the battery temperature is not elevated near the end of its cycle. Splitting hairs perhaps. My discharge rate matches the tablets specs even with the battery application running.
Second day of monitoring the device operated correctly. I did check and found that I have a Titanium backup batch job setup to run every day a 3 am. Which coincides with time I observed the device display turning on. I will move the time and see if the issue moves too.
Steve
Also turn off push notifications that certain apps have. They suck up a lot of battery. Install the Better Battery Stats app (search xda for it). Won't have to pay unless you want to. Monitor the partial wake locks to determine what apps are using battery during sleep.
I have a similar problem, i got a nook with cm7 and the battery doesn't last at all, i charged it yesterday and let it all night without touching it to see how long would it last and after 12 hours i got 30% and it says 70% of the battery was drained by the andoid os, it says that the processor was working for 2hrs!
i got it and stared looking for an answer to this problem and in less than 10 min it has drained 4% of the total charge, this didn't happened with the stock firmware so I'm thinking about trying jelly bean and if it doesn't get better i will have to go back to the stock firmware
Hwong, I think you hit it on the head. Last evening my NookT had a much higher current draw, loosing 20% in 12 hours. I saw this when I checked it a midnight. I had left the Nook with the battery monitor application in the graph mode, likely running as an active application instead of a "monitor" mode. Titanium Backup did run last night but it runs for such a short period it did not even show up on the graph.
So I really don't know which application or notification is causing me a problem but the issue I have had is like loosing 20% of my battery in a 6-8 hour period. Which to me looks like an application is running that shouldn't and the time I observed the screen on would do it too. As I started this post I am still on 1.4.0, rooted, OTA blocked with hidden commands.
I did a hard factory reset and wipped the caché, now my nook has been charged for 2 days on sleep mode with the wifi on.
I believe the problem was caused by an application, i believe it was the launcher and theme i was used, i re-installed it yesterday and the tablet started to drain battery quickly again so i cleaned the data used by them and uninstalled them.
The battery monitor widget use to say my battery would last 2 hrs of video playing, now it says it should last 8:30, closer to the 9hrs promissed by B&N.
It all about old sins. I found that I was jumping around in the normal Nook UI and not using the back button. So several things were still running in the background. Even though that little darling looks the same, that background stuff is a killer. I did a quick test with the battery monitor by leaving it in the graphic mode and sure enough the discharge rate went up 400%, just a dumb graph in the background plotting Voltage versus time. When I use the back button on the application graph, the current draws goes to near zero.
It really does a nice job of standby or sleep.
Maybe this will help.
You could use titanium backup to freeze the apps that you think could be causing more than usual battery drain and maybe narrow the issue down?:fingers-crossed:
sgschwend said:
It all about old sins. I found that I was jumping around in the normal Nook UI and not using the back button. So several things were still running in the background. Even though that little darling looks the same, that background stuff is a killer. I did a quick test with the battery monitor by leaving it in the graphic mode and sure enough the discharge rate went up 400%, just a dumb graph in the background plotting Voltage versus time. When I use the back button on the application graph, the current draws goes to near zero.
It really does a nice job of standby or sleep.
Click to expand...
Click to collapse

[Q] Battery Life Repair

I ask for an opinion to experts.
I installed the app Battery Life Repair
https://play.google.com/store/apps/details?id=com.BoshBashStudios.batterydoctorrepair
I can't understand if this app is really effective or if it is a fake. In both cases, if you want to give your opinion can you justify it with technical considerations?
It's strange to see so many high ratings, but it is also strange that there are no tests or in-depth reviews.
Sorry for bringing a thread from the dead but I am also very curious as to how this app works (or if it does at all).
Such apps don't work.. They're usually fake and earn money through ads. Battery life is purely hardware and can't be increased by a software other than changing kernel features...
Sent from my Moto G
MasterAwesome said:
Such apps don't work.. They're usually fake and earn money through ads. Battery life is purely hardware and can't be increased by a software other than changing kernel features...
Sent from my Moto G
Click to expand...
Click to collapse
what a load of crap.
You can increase the length of your battery time betweeen charges by lessening the load on the cpu(which causes ups in voltage usage).
we reduce cpu load by reducing ram usage too.
also, turning the display brightness down and turning off unneeded features like bluetooth or wifi.
the kernel can be made more efficient like you said. so i agree there.
Lgrootnoob said:
what a load of crap.
You can increase the length of your battery time betweeen charges by lessening the load on the cpu(which causes ups in voltage usage).
we reduce cpu load by reducing ram usage too.
also, turning the display brightness down and turning off unneeded features like bluetooth or wifi.
the kernel can be made more efficient like you said. so i agree there.
Click to expand...
Click to collapse
Trying to do that the battery app takes more battery by being in the background always. sometimes it also steals data.. There's no point you're better of without it.
Regards
MasterAwesome
Sent from my Moto G
MasterAwesome said:
Trying to do that the battery app takes more battery by being in the background always. sometimes it also steals data.. There's no point you're better of without it.
Regards
MasterAwesome
Sent from my Moto G
Click to expand...
Click to collapse
Of course the battery does nothing.
thats what the settings > battery
function is for anyways. to see the resource hog of the system.
so it works in identifiying the problem.
but your right, the battery app is unnecessary since we already have a stock implementation.
but that wasn't my point. my point is that you can modify the userspace for more battery between charges.
Lgrootnoob said:
Of course the battery does nothing.
thats what the settings > battery
function is for anyways. to see the resource hog of the system.
so it works in identifiying the problem.
but your right, the battery app is unnecessary since we already have a stock implementation.
but that wasn't my point. my point is that you can modify the userspace for more battery between charges.
Click to expand...
Click to collapse
At the end of day we agree that battery apps are not required... Android is pretty optimized by itself.
Decrease screen brightness and timeout it takes the highest amount of battery.
Sent from my Moto G
MasterAwesome said:
At the end of day we agree that battery apps are not required... Android is pretty optimized by itself.
Decrease screen brightness and timeout it takes the highest amount of battery.
Sent from my Moto G
Click to expand...
Click to collapse
"At the end of day we agree that battery apps are not required.." obviously.
"Android is pretty optimized by itself. " its not about android(I didnt mention android being optimized, I figured that it was pretty obvious and didnt need discussion), it was about android having the tools to find the problem. see the following:
"Decrease screen brightness and timeout it takes the highest amount of battery. "and this brings me to MY POINT.
We are talking about app hogs which ARE a problem.
I would expect the OP has enough of a brain to reduce the brightness.
You have app services that use tons of ram and cpu. Why can't you accept that?
The theory behind a battery app is legitimate, but the OP just has to use the builtin android application.
Lgrootnoob said:
"At the end of day we agree that battery apps are not required.." obviously.
"Android is pretty optimized by itself. " its not about android(I didnt mention android being optimized, I figured that it was pretty obvious and didnt need discussion), it was about android having the tools to find the problem. see the following:
"Decrease screen brightness and timeout it takes the highest amount of battery. "and this brings me to MY POINT.
We are talking about app hogs which ARE a problem.
I would expect the OP has enough of a brain to reduce the brightness.
You have app services that use tons of ram and cpu. Why can't you accept that?
The theory behind a battery app is legitimate, but the OP just has to use the builtin android application.
Click to expand...
Click to collapse
Confrontation Much
The original posting he said was that software does not have impact on hardware in that it can not fix physical damage on the battery such as dead cells.
Such apps are just fake.
I purchased a new phone and same day I installed repair battery life. It showed 8 low cells and one inactive. It claimed it will increase my battery life by 18% (WOW, LOL)
After that I tried again and it showed me all green cells.
I cleared the app's cache, cleared data and uninstalled the app.
Later on, I calibrated the battery with another app called "battery fix" which needs root and deletes batterystats.bin file
I once installed "repair battery life" and guess what? It showed again 8 low cells and one inactive.
It's just another fake crAPP
Number of cells shown suggests fake.
I tried Battery Life Repair by "Extended Apps " and I remain very sceptical. Nowhere it is explained what the app actually does.
A normal Phone has one or two cells. This app shows 100 cells and claims that some are broken or damaged and the software can repair it through some extraordinary (supernatural?) process. It Claims it repaired these problematic cells (like 5 out of 100), although it physically makes no sense considering a phone has one or two cells, which are usually either working or broken. Then it also requests access to media, identity and accounts, which is suspicious given what the app claims to do.
Comments in the app-store just prove to me that placebos work. On the other hand, some people figured that if the "battery repair" is done, the app data is deleted and the app run again, it again shows the same amount of "problematic cells".
aj1789 said:
I tried Battery Life Repair by "Extended Apps " and I remain very sceptical. Nowhere it is explained what the app actually does.
A normal Phone has one or two cells. This app shows 100 cells and claims that some are broken or damaged and the software can repair it through some extraordinary (supernatural?) process. It Claims it repaired these problematic cells (like 5 out of 100), although it physically makes no sense considering a phone has one or two cells, which are usually either working or broken. Then it also requests access to media, identity and accounts, which is suspicious given what the app claims to do.
Comments in the app-store just prove to me that placebos work. On the other hand, some people figured that if the "battery repair" is done, the app data is deleted and the app run again, it again shows the same amount of "problematic cells".
Click to expand...
Click to collapse
I strongly suspected myself this app is complete bull twaddle, but I was also curious so installed it just to see what it makes of the battery "analysis".
It magically 'fixed' the problem cells, but unlike you on a subsequent retest the previously 'faulty cells' had still be 'fixed'.
I wonder how this app is polling the 'cells'? Or is it just making up some fancy graphics and not actually doing anything at all under the hood?
I also wonder what would happen if I switched batteries or took the existing one out and in again? Maybe I'll try at some point.
This is my experience.
I thought this is impossible but i installed it just to try..
In that time i first tryed it i had Galaxy 3 Apollo. Battery was so bad that percentage was going low when you were looking on it and after some short period of time phone just shutdown by itself.. I decided to try it so maybe i save money for new battery. With few shutdowns i finally did it and something happen. Battery didn't go low that way and phone stoped turning off by itself!! It could stop while i was washing dishes but it was "fixed" after i used that app, so i dont know. I don't personally think that some app can fix hardware issue but i think it works as some "refresh" or something like that. I don't know really but in my case was money saver what ever that is. Oh and i'm talking about "Extended Apps" app.. :/
I'm also skeptical about these things but unlike others in here, I tried before drawing conclusion with my awesome rational brain. And yes it works marvelous. My Galaxy Note 3 battery is working as brand new, giving 3 to 4 days without charging and it was 1 to 2 days before the app. I don't think that is placebo effect and I have absolutely no idea what the app does, and too bad the dev doesn't have a website, but the app is good. Also using the other app from the same dev, called Advanced Battery Calibrator and letting the phone charge till 100% while off did wonderful things.
I still wonder how it can fix hardware of it simply erase data from the battery increasing risk to catch on fire, but it does work.
As far as I know, the software keeps data of the battery in other to avoid charges over 100%. With time that will effectively make the battery charge till 99% then 98% and goes on, till u have a battery on 70% for example but the software say its 100%, because it wont charge more than that to avoid the risk of fire. Perhaps this app erase that data and increase the risk of mal function. But I have no idea.
douglasrac said:
I'm also skeptical about these things but unlike others in here, I tried before drawing conclusion with my awesome rational brain. And yes it works marvelous. My Galaxy Note 3 battery is working as brand new, giving 3 to 4 days without charging and it was 1 to 2 days before the app. I don't think that is placebo effect and I have absolutely no idea what the app does, and too bad the dev doesn't have a website, but the app is good. Also using the other app from the same dev, called Advanced Battery Calibrator and letting the phone charge till 100% while off did wonderful things.
I still wonder how it can fix hardware of it simply erase data from the battery increasing risk to catch on fire, but it does work.
As far as I know, the software keeps data of the battery in other to avoid charges over 100%. With time that will effectively make the battery charge till 99% then 98% and goes on, till u have a battery on 70% for example but the software say its 100%, because it wont charge more than that to avoid the risk of fire. Perhaps this app erase that data and increase the risk of mal function. But I have no idea.
Click to expand...
Click to collapse
If your battery has dead cells im sorry but no app will fix it, unless its magic! It must replace the cells somehow magically! Omg do some basic research these apps are fake garbage! Maybe it can fix my dead s3 battery hahaha NOT!
hilla_killa said:
If your battery has dead cells im sorry but no app will fix it, unless its magic! It must replace the cells somehow magically! Omg do some basic research these apps are fake garbage! Maybe it can fix my dead s3 battery hahaha NOT!
Click to expand...
Click to collapse
ofc is not gona revive a battery,but even that it can be made,in some cases,i saw that of ppl proving that live,they took a dead battery and test it to show that it is dead and just used another same model battery that it was working and hold them connected like 5 min toghether,after that it just put the dead battery at charged and what u know?it did revived it,no idea how the battery actually work,but it seems that they can actually get stuck somehow and they can get a "forced" revive,like a CPR for humans,but like i said,not working with all,same as like on humans,not all can be revived with CPR,but i guess that this app has to do something coz like some in here i did used it and ... the magic worked,not on a dead battery,so scheptical as it sounds,on some batteries it works even tho maybe is not something hardware but maybe just something software,why i say that,i had a tablet and a few times when i was restarting the tablet,after a min was turning off coz of battery 0%,and that after i got the recharger plug off,so it was 100% for sure,after a few times restarting the tablet it was showing again 100 % as it should be,so i guess that not even android is always reading the data correctly
Of course is a full fake. Uninstall them, becouse they can do bitcoin mining or whatever gain trough pupup and promotions., as well as getting your data.
1) Ion litium or polymer batteries cannot be repaired.
2) cells are 1 or max 4 not 256 as those apps shows
3) clearing the cache brings different fault cells
4) reinastalling shows other broken cells
5) strangely the application after "repair" stays open in background. So at least the word "repair" is a joke fooling people.
6) dynamic ram and ddr are always powered and refresh cycles are required in all the address space generally, so saying that freeing ram allow more battery duration is a fake.
7) whatever the app does to have battery least more is just sw and tricky. I would not rely on that and remove the app.
Wow...
MasterAwesome did u disable Lgrootnoob's account because it says its disabled was it because he challenged ur opinion? lol childish much? Who cares if it works it either works or it doesnt I dont see it hurting me
---------- Post added at 07:50 AM ---------- Previous post was at 07:47 AM ----------
Crazydan360 said:
MasterAwesome did u disable Lgrootnoob's account because it says its disabled was it because he challenged ur opinion? lol childish much? Who cares if it works it either works or it doesnt I dont see it hurting me
Click to expand...
Click to collapse
Didnt notice this was my brothers account he uses my phone
Hello, there's a way to calibrate your battery without root.
to calibrate your battery, i found by my self a way to(when i did it, the battery time left was increased):
1)charge your phone to 100% battery.
2)turn on- wifi, auto rotation, bluetooth...(everything that is consuming battery not including apps)
3)leave your phone with screen off.
4)discharge much as you can.
5)when you finished, charge your phone and don't use the phone.
optional:
if you want a proof that this is worked- open settings and see how much time left for your battery(you will see that it had been increased).
FYI I just finished testing Battery Life Repair 2018 by running it on a new Android tablet with a huge 8000+mAh battery. It reported about 14 weak or bad cells out of a total of 120 cells. When told to fix those cells, it requests you to download another of their apps to help support them. Just say YES, then kick back out without downloading and the fix finishes. I had hardware "USB Safety Tester" connected during this test (it displays various info including the charging voltage and amperage). With about 12% of the cells reported bad, after the fix the Tester recorded zero increase in Volts or Amps. So it maintained a steady watt draw from the charger even after 14 more cells were now drawing watts to charge. Next I cleared storage on the app, ran it again, and got 12 different cells reported to have problems. Fixed those cells, and again, no change in charge draw.
I also found it strange that it would use WIFI and Cell Data and run in the background. Why?
The Battery Life Repair app reports that my Galaxy S5 also has 120 cells in its battery. Seeing as almost 99% of phones and tables have a SINGLE cell in their battery (one or two phones have 2 cells), the display of a 120 cell grid seems rather fishy. Having a 120 cell battery requires cell balancing hardware and software that that would add to the cost of the phone, plus make the battery physically larger. My electric bike has about 80-90 cells in it and it weighs about 15lbs and is 30,000 mAh and 47 volts. Hard to do in one or two cells. That is a good example of why a multi cell (3.6 v each?) battery is needed. But not a cell phone or tablet.
I know my test is not the most scientific, but at least I did check for a change in wattage draw before and after fixing cells, and not just ecstatically claim my battery has improved.
So I call Battery Repair Life 2018 to be a steaming pile of BS that is probably robbing you of your contacts and other personal information while running in the background sucking up your data plan. But, hey, that's just me.

Categories

Resources