I just bought the Mobo Carrera slim Horizontal case (for the Galaxy Nexus) and I have to say that I'm very happy with it. It fits the LTEvo nice and snug. The phone doesn't budge at all, especially when shaken vigorously. Also magnet doesn't come off when turned upside and shaken hard. The case is nice and slim to complement the slimness of the LTEvo. The interior is outlined in red leather (sort of complements the phone as well). The belt clip is made of metal (but covered in leather) and swivels but the swivel is rigid and doesn't move with little force with is good to me; stays in the position it is set to. Has the opening at the bottom to allow you to push the phone up to easily remove it.
If you are interested in a horizontal case, then this might be the one for you. Just google Mobo Carrera Horizontal case Galaxy Nexus; amazon has it here Mobo Carrera Horizontal Carrying Case. Other site sell it as well.
I bought 2 more slim cases and I'll write about them here as well when they come in this coming week.
I am looking into a belt case.... Waiting for your review
DarkManX4lf said:
I am looking into a belt case.... Waiting for your review
Click to expand...
Click to collapse
Well I didn't keep the other two cases. One was too big for the LTEvo that the phone flopped around in the case. That was a killer for me, so I didn't even bother to give it another thought.
The other one is the one pictured below. It was a case for the Galaxy Nexus so it didn't really fit all that well. Don't get me wrong the case was well designed but the dimensions were just short of fitting the LTEvo. The LTEvo was hanging out of the case. If they make one specifically for the LTEvo, it would be worth investing in it.
unknown_owner said:
Well I didn't keep the other two cases. One was too big for the LTEvo that the phone flopped around in the case. That was a killer for me, so I didn't even bother to give it another thought.
The other one is the one pictured below. It was a case for the Galaxy Nexus so it didn't really fit all that well. Don't get me wrong the case was well designed but the dimensions were just short of fitting the LTEvo. The LTEvo was hanging out of the case. If they make one specifically for the LTEvo, it would be worth investing in it.
Click to expand...
Click to collapse
If you don't mind my asking, what cases were the ones that were too big? Also do you think they'd fit the Evo with a silicone or TPU case on? Thanks!
Ditto to the above I like a gorm fitting holster but I never go out without a case. For work I use the Otterbox commuter with the seido active holster but for regular use, I use a thin TPU case. I have yet to find a holster that is thin and long enough to fit the phone with a TPU case.
Any suggestions?
Sent from my EVO using Tapatalk 2
wonton2049 said:
Ditto to the above I like a gorm fitting holster but I never go out without a case. For work I use the Otterbox commuter with the seido active holster but for regular use, I use a thin TPU case. I have yet to find a holster that is thin and long enough to fit the phone with a TPU case.
Any suggestions?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I'm still on the hunt too.
I picked one up from Walmart, its been holding up well and fits great with my tpu
crucial929 said:
I picked one up from Walmart, its been holding up well and fits great with my tpu
Click to expand...
Click to collapse
Do you know the brand? I went to Walmart and they had nothing that fit.
DarkManX4lf said:
Do you know the brand? I went to Walmart and they had nothing that fit.
Click to expand...
Click to collapse
It's made by case logic
wonton2049 said:
Ditto to the above I like a gorm fitting holster but I never go out without a case. For work I use the Otterbox commuter with the seido active holster but for regular use, I use a thin TPU case. I have yet to find a holster that is thin and long enough to fit the phone with a TPU case.
Any suggestions?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
DarkManX4lf said:
I'm still on the hunt too.
Click to expand...
Click to collapse
The seidio surface holster fits the tpu covered evo like a glove. This is what i use.
Sent from my EVO using xda app-developers app
I bought my dad a side clip holster from siedioonline and he was ecstatic with it.
Even I loved it, and I really dislike holsters in general.
Related
What horizontal belt case will work with the following?
http://www.amazon.com/gp/product/B000H13M2K/ref=ox_sc_act_title_1?ie=UTF8&m=A30XRGG45X0IFD
Yeah I don't know. I'm not sure there is anything that is big enough out there to hold this phone with abgell case on.
I will say that I really like the gel case and I really would love also to find something that works.
Sent from my SAMSUNG-SGH-I717 using xda premium
Anyone getting belt cases??? I work in Construction and need to put it someplace besides my pocket.
reubenray said:
Anyone getting belt cases??? I work in Construction and need to put it someplace besides my pocket.
Click to expand...
Click to collapse
Personally I am waiting for the Seidio belt holster/belt/case combo to come out..Should be soon I hope..
http://www.seidioonline.com/category-s/7709.htm
Maybe this case depending on the thickness the case adds.
LEATHER CASE COVER VERTICAL POUCH FOR Samsung Galaxy Note i9220
my make
http://forum.xda-developers.com/showpost.php?p=22732528&postcount=11
I ordered one of these. I will let you know how it works. Not bad fro $10
http://youtu.be/t64Sn4h7UfE
pony13ca said:
I ordered one of these. I will let you know how it works. Not bad fro $10
http://youtu.be/t64Sn4h7UfE
Click to expand...
Click to collapse
Looks good and great price.
I have the Boxwave Unicolor case and it fits in the Pdair vertical leather belt holster wonderfully. I'd wager the horizontal pdair one has similiar extra room. Not sure though.
Sent from my SAMSUNG-SGH-I717 using xda premium
reubenray said:
Anyone getting belt cases??? I work in Construction and need to put it someplace besides my pocket.
Click to expand...
Click to collapse
I work in Aboriculture and nearly destroyed my iPhone 4 due to saw dust & dirt. there's no way in hell Im taking my note to work.
I got one of those dirt cheap pre-pay phones and I forward my calls to it. when I get home, I toss it aside and unforward my calls.
Err0xx said:
I have the Boxwave Unicolor case and it fits in the Pdair vertical leather belt holster wonderfully. I'd wager the horizontal pdair one has similiar extra room. Not sure though.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Got any pics of the that Pdair? I'm really interested in the vertical belt holster type case...just not sure how bulky it is once clipped on to a belt.
randaddy said:
Got any pics of the that Pdair? I'm really interested in the vertical belt holster type case...just not sure how bulky it is once clipped on to a belt.
Click to expand...
Click to collapse
One pic is of the holster by itself, the other is clipped on my pants. Not bulky at all and the clip holds on like a champ; no chance of it coming off.
Sent from my SAMSUNG-SGH-I717 using xda premium
Here is a shot of the vertical case with the Note in it. The note is also in the Boxwave Unicolor case.
Sent from my Xoom using xda premium
Err0xx said:
Here is a shot of the vertical case with the Note in it. The note is also in the Boxwave Unicolor case.
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
looks like a tight fit
wonder if it'll do with they hybrid case,which is thicker i believe
Err0xx said:
One pic is of the holster by itself, the other is clipped on my pants. Not bulky at all and the clip holds on like a champ; no chance of it coming off.
Click to expand...
Click to collapse
I prefer belt clips that have a J type of design so that if anything hits the case from underneath, the case cannot slip off the belt. The bottom of the clip catches the belt on the way up. Most tight metal belt clips will slide up if for example, you sit in a tight movie seat and the seat arm pushes up on the bottom of the case and knocks the case off your belt.
Does the PDAir clip on this case have a way of stopping this scenario?
Hmm... I have always liked belt clips/cases but I think the Note is too big to be dangling from my waist. I'd like to order one just to try it out though.
I bought a Nite Ize xlarge belt case with a clip off amazon. It should be here today. The note should fit and may be a snug fit. I has on of these for my Inspire and liked it.
Still waiting for the Nutshell/Tough-as-Nuts case to be released but I'm definitely getting one. They'll even make it oversized for a small upcharge if you want it to fit an add-on shell.
http://forum.xda-developers.com/showthread.php?t=1497252
Ragin Cajun said:
I bought a Nite Ize xlarge belt case with a clip off amazon. It should be here today. The note should fit and may be a snug fit. I has on of these for my Inspire and liked it.
Click to expand...
Click to collapse
Which one did you get? I was looking at these yesterday on Amazon.
This is the one I bought. One of the reviewers says the note does fit but it's snug.
http://www.amazon.com/gp/aw/d/B006H...ile?redirect=true&ref_=oh_o01_s00_i00_details
Hi there,
Im looking for thin case.
Best I have found is this case on ebay
Design is not bad, but its not covering glass area around the camera.
Questions:
1. Is there any thin case(plastic, rubber) that covers that?
2. Anyone tried skins? Will they remove easily(considering phone is jeans pocket)?
3. Those who are using various rubber, gel, hybrid and so on cases, how much fatter is your phone with them? If its not that much fatter suggestions on good cases then
stifler05 said:
Hi there,
Im looking for thin case.
Best I have found is this case on ebay
Design is not bad, but its not covering glass area around the camera.
Questions:
1. Is there any thin case(plastic, rubber) that covers that?
2. Anyone tried skins? Will they remove easily(considering phone is jeans pocket)?
3. Those who are using various rubber, gel, hybrid and so on cases, how much fatter is your phone with them? If its not that much fatter suggestions on good cases then
Click to expand...
Click to collapse
Try looking into the otterbox defender, or ballistic hc.
b1gsby_02 said:
Try looking into the otterbox defender, or ballistic hc.
Click to expand...
Click to collapse
Thanks mate
I found this one, and I´ll go with that one probably
I have tried them all, best case is either the capdase brand or official HTC TPU case. They both let your phone slide into your pocket easy, don't bulk out your phone, look great and offer good protection.
The Ebay jobs are just cheap rubbish you get fed up with after a week or 2.
Sent from my HTC EVO 3D X515a using XDA
vervester said:
I have tried them all, best case is either the capdase brand or official HTC TPU case.
Click to expand...
Click to collapse
Any link for official HTC TPU case where I can find it
Look up the Kraken AMS. That is a reasonable case.
Alternatively just look for something like this: http://www.ebay.co.uk/itm/BLACK-HAR...sesPouches&hash=item3a6a2fac16#ht_1887wt_1396
Best thing about this type of case is it doesn't add too much bulk, and is easy to get in and out of your pocket (unlike a silicone/rubber case). And it will actually protect your phone in a drop unlike that case you linked to in your original post. As for your screen... only BIG cases include a plastic layer to completely cover the glass.
Are you just looking for something with raised edges, and then use a screen protector perhaps? (Like the ebay one I showed you).
http://www.amazon.com/Acase-Superle...1HVI/ref=sr_1_9?ie=UTF8&qid=1333169597&sr=8-9
this has been the best case for me so far, its very thin, and has a rubber skin with a hard plastic shell..the kraken, and defender are way to big for me. this case is just the right size its about the same size as a tpu case.
stifler05 said:
Any link for official HTC TPU case where I can find it
Click to expand...
Click to collapse
HTC EVO 3D TPU Case TP C630
Loads available in the UK not so sure about else where. Ebay perhaps, Amazon etc.
Well worth the extra few pounds.
Sent from my HTC EVO 3D X515a using XDA
@Scougar- that case looks good. Nit expensive, will order and try it
@jtgarza3- I know about Acase but the problem is I can't get it in my country(amazon ships books and kindle only) and I cant find it elsewhere. I believe it is the best case
@vervester- thanks mate, will try it
Still can't find a case I like better than the acase superleggra.... Look into that, wonder if there's anywhere you buy it that will ship it to you. its cheap and sounds like what your looking for.
Sent from my PG86100 using xda premium
stifler05 said:
Thanks mate
I found this one, and I´ll go with that one probably
Click to expand...
Click to collapse
My case looks exactly the same and it was £3 from amazon.
IMO the thinnest cases are the back cases ones that doesnt really cover the top and bottom bezel...just the sides and back. BUT if you really want to protect your phone and not get it scratched up over time, you are better off using a TPU type case as the are not too thick and are of softer material and will not rub off any of the black anodized paint. Unlike any hard cases, whether its back only or 2 pieces. Also TPU cases are more absorbent during accidental drop on hard surfaces.
I was running seidio 2pc case hard case w/kick stand with my first 3d and although it had felt inside it eventually rubbed off the pain on the top corners of my phone. The felt inside was very thin and the case is not skin tight so it would move some and the slight movement of the case over time eventually sandpapered some of the paint off. TPU or rubber type cases are more skin tight and is not as abrasive as plastic on painted metal and will not damage the paint so long as you also clean it off from time to time. Some dirt can eventually get in between and the dirt will act as sandpaper. So just consider this when you're buying a case as some of you would probably like to sell your phone later down the road or just want to keep it looking new for a long time.
Finally found ultra thin(slim) case
Whole line is here
http://www.obostore.com/index.php?m..._description=1&categories_id=144&keyword=case
stifler05 said:
Finally found ultra thin(slim) case
Whole line is here
http://www.obostore.com/index.php?m..._description=1&categories_id=144&keyword=case
Click to expand...
Click to collapse
Those thin cases are the exact same thing as the case mate barely there cases. Much cheaper. I got the rock brand and like it a lot. You do lose that boot of protection at top and bottom though.
Some people have complained that these type of cases are a bit loose on the sides. Easy fix is to lightly squeeze the sides inwards... tight fit!
Sent from my Transformer Prime TF201 using xda premium
mozman said:
Those thin cases are the exact same thing as the case mate barely there cases. Much cheaper. I got the rock brand and like it a lot. You do lose that boot of protection at top and bottom though.
Some people have complained that these type of cases are a bit loose on the sides. Easy fix is to lightly squeeze the sides inwards... tight fit!
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
I went tpu so far like how smooth and not bulky it is lol Ditched the kraken and ballistic
Sent from the Reaper
reaper24 said:
I went tpu so far like how smooth and not bulky it is lol Ditched the kraken and ballistic
Sent from the Reaper
Click to expand...
Click to collapse
TPU cases are awesome and super sturdy.
vanessaem said:
TPU cases are awesome and super sturdy.
Click to expand...
Click to collapse
I agree went with a blue one those cheap screen protectors work well if you can put it on without dust .
Sent from the Reaper
yeah but the Evo gets hot sometimes and having those extra layers , scared would mess the phone up because of heat.
tonedinh said:
yeah but the Evo gets hot sometimes and having those extra layers , scared would mess the phone up because of heat.
Click to expand...
Click to collapse
What case you talkin about? Haven't had any heat issues?
gtnote said:
Very thin Case made with TPU and PC comes with a screen protector and about $12 using 10% off coupon code xda,
http://www.kevikev.com/Yoobao-TPU-Silicone-Case-for-Sprint-HTC-EVO-3D-TPUHTCEVO3D.htm
View attachment 1024718
View attachment 1024720
View attachment 1024721
Click to expand...
Click to collapse
I got mine. The case even covers the camera also come with a screen protector which works well if you put it on str8 with no dust.. Tho the one you posted looks like it's for a extended battery.
Cost only 4 dollars 3 shipped
Ok, so here's why I ask (I tried searching but I really couldn't find a similar thread here):
I have the white Evo LTE - I picked the white because I really like the way it looks with the silver.
DILEMMA: I like the slimness of the TPU cases, but I also like using a belt clip when I'm out and about.
Have any of you come across a belt clip that will work well with a TPU case, like the Cruzerlites, and be a good fit?
I was in the same boat as u. Ima fan of the tpu cases but wanted a nice holster so I bought this one.
http://www.cellphoneshop.net/evo4lhard.html
It came with a nice hard shell case but my evo and my tpu case fit in perfectly too so I keep using my tpu in the holster instead of the hard case.
Sent from my EVO LTE using xda premium
Yeah I think if you get a holster that comes with a hard case or is designed to work with a case it will fit. My Seidio holster is compatible with a tpu case even though it came with a hard case.
SPreston2001 said:
Yeah I think if you get a holster that comes with a hard case or is designed to work with a case it will fit. My Seidio holster is compatible with a tpu case even though it came with a hard case.
Click to expand...
Click to collapse
You know, I didn't even really think of that. I wasn't sure a production clip would be compatible. Off to my local store to find one!
Just ordered one and I will try to keep everyone posted on how it works out. $5.95 hopefully this will work out for those of us that need a more rugged case! http://www.amazon.com/dp/B00E4RV8DS
Your URL doesn't work. I believe http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS is it?
zephiK said:
Your URL doesn't work. I believe http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS is it?
Click to expand...
Click to collapse
Yeah thanks that's it! Not sure what went wrong with the URL
msd24200 said:
Just ordered one and I will try to keep everyone posted on how it works out. $5.95 hopefully this will work out for those of us that need a more rugged case! http://www.amazon.com/dp/B00E4RV8DS
Click to expand...
Click to collapse
There another OP for this case, it actually increased to 3x what it originally was. It was 1.99 a week ago.
I'm already using this case, it's amazing for $1.95
agreed i picked up this case on the 9th when it was for pennies. for the price it far exceeds in all areas. OP you will enjoy it for sure.
I bought this case when it was $1.95 on Amazon Prime, and I have to say, I actually feel more secure with the phone in a Spigen. The moko's "rubber" shell is too lose, and the plastic case is too thin and flimsy, much more thinner than a Seido Dilex or an Otterbox Commuter. I think I may just stick with a Neo Hybrid for now and just give away the Moko to someone on XDA.
Thanks for the info everyone
PaisanNYC said:
I bought this case when it was $1.95 on Amazon Prime, and I have to say, I actually feel more secure with the phone in a Spigen. The moko's "rubber" shell is too lose, and the plastic case is too thin and flimsy, much more thinner than a Seido Dilex or an Otterbox Commuter. I think I may just stick with a Neo Hybrid for now and just give away the Moko to someone on XDA.
Click to expand...
Click to collapse
Totally agree with you. I got this case when it first became available. It has a really nice feel and looks great. However the tpu inner/outer shell is very flimsy, especially around the lip of the phone and has the look and feel as though debris could easily enter from the cutouts. The fitament on the phone in the case itself is just OK. The phone does not clip in, rather it slides in from the side making it awkward for some to quickly access. If your looking for something to put on your belt it works.
Sent from my Nexus 6
swiftchancelor said:
Totally agree with you. I got this case when it first became available. It has a really nice feel and looks great. However the tpu inner/outer shell is very flimsy, especially around the lip of the phone and has the look and feel as though debris could easily enter from the cutouts. The fitament on the phone in the case itself is just OK. The phone does not clip in, rather it slides in from the side making it awkward for some to quickly access. If your looking for something to put on your belt it works.
Sent from my Nexus 6
Click to expand...
Click to collapse
It isn't TPU, it is rubber...and the fit on my 32GB N6 is great...only complaint is that the holster doesn't have a locking clip. For a sub-$10USD rugged case you cannot do better. Heck Seidio and Platinum sell the same thing for $60USD for other phones.
Skripka said:
It isn't TPU, it is rubber...and the fit on my 32GB N6 is great...only complaint is that the holster doesn't have a locking clip. For a sub-$10USD rugged case you cannot do better. Heck Seidio and Platinum sell the same thing for $60USD for other phones.
Click to expand...
Click to collapse
The Seidio Dilex line of cases are more sturdy and rugged. And the Seido spring-loaded holsters make it quicker to release the phone off the belt. The Moko is a great sub-$10 case, but it cannot go up against a Seidio/Platinum case.
PaisanNYC said:
The Seidio Dilex line of cases are more sturdy and rugged. And the Seido spring-loaded holsters make it quicker to release the phone off the belt. The Moko is a great sub-$10 case, but it cannot go up against a Seidio/Platinum case.
Click to expand...
Click to collapse
LOL....as an owner of a couple Seidio cases and a Platinum case...the Moko comes from exactly the same Chinese OEM and is made from exactly the same stuff (rubber/plastic). The only difference being Seidio has a metal kickstand.
Skripka said:
LOL....as an owner of a couple Seidio cases and a Platinum case...the Moko comes from exactly the same Chinese OEM and is made from exactly the same stuff (rubber/plastic). The only difference being Seidio has a metal kickstand.
Click to expand...
Click to collapse
Got proof or just heresay?
PaisanNYC said:
Got proof or just heresay?
Click to expand...
Click to collapse
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Skripka said:
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Click to expand...
Click to collapse
So it's speculation. Just wanted to make it clear. Thanks
Skripka said:
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Click to expand...
Click to collapse
Lol, you ain't lying about the lawsuits. I should be getting the i-blason case here in the next couple days, it was actually sub $10 when I scooped it up as well. Looks almost the same minus the holster and the design on the rubber, even the plastic outter clip looks identical. Don't get me wrong, the Moko isn't bad at all.. I'm just a bit ocd about the loose edges and small gaps near the cutouts. I feel like over a short period of time they'll get lose.
Sent from my Nexus 6
I may order one of the poetic revolution cases while they are still cheap. My moko should be her on 12/3
Ordered the orzly tempered glass screen protector a few minutes ago as well
OK the moko came in today and first impressions are really good! Not sure yet how it will hold up but the fit is great. All the buttons feel great! The case actually looks pretty good (granted looks are in the eye of the beholder as they say). The kickstand doesn't seem to bad. For a rugged case, its actually surprisingly slim which may make a lot of people happy.
Now for the bad as others have mentioned pulling the phone out of the holster causes the rubber part of the case to pull away from the phone. Not real bad but it does. The phone slides into the case but its a tight fit.
All in all I paid $5.95 + shipping on Amazon for this case and initial impression is for that price if you need a case it's a great buy. Just noticed the price is now $6.95 so if your looking for a decent cheap case I'd buy it before the price goes up. I'm going to use it until I find a satisfactory higher end case.
I did order a poetic revolution case as well and when it comes in I'll let you all know who it is.
I'm looking for suggestions for a thin case for my Pixel that will fit in a belt holster. I'm currently using this one:
https://www.amazon.com/gp/product/B01MG4BBX1/
but the case is pretty thick, around 3.5mm. All of the ones in that style have a kickstand on the back, which adds to the thickness.
I see Seidio makes a Surface which they say is 2mm thick, quite a bit thinner. I've never had one, and am not sure about the TPU inner part covering the buttons, wondering if it messes up the feel.
https://www.seidioonline.com/product/google-pixel-surface-case/
Any comments on the Surface for this (or other) phones, or suggestions for a thin case/belt holster set?
I use a Google Live Case with a vertical leather belt pouch like this one. Works well for me.
I thought about the Seidio Surface, but don't like kickstands.
I can recommend the Supcase that comes with a belt clip but it's not the thinnest thing in the world - definitely a thicker heavy duty case. No kickstand though.
On that note, I'd be happy to mail you the belt clip if you wanted it if you paid for shipping, as well as test my various cases first to see if any are compatible with it. Just let me know. (My wife uses the case but not the belt clip.)
UnusualSuspect said:
I use a Google Live Case with a vertical leather belt pouch like this one. Works well for me.
I thought about the Seidio Surface, but don't like kickstands.
Click to expand...
Click to collapse
Thanks for the suggestion, but I had bad luck with phones sliding out of that type of case (running with the dog or working under a car).
Jaxidian said:
I can recommend the Supcase that comes with a belt clip but it's not the thinnest thing in the world - definitely a thicker heavy duty case. No kickstand though.
On that note, I'd be happy to mail you the belt clip if you wanted it if you paid for shipping, as well as test my various cases first to see if any are compatible with it. Just let me know. (My wife uses the case but not the belt clip.)
Click to expand...
Click to collapse
Thanks, but I have a belt clip for it without a case (think it's encased brand, ironically).
I decided to order a Surface and give it a try. Showed up today. The TPU part is a lot thinner than I was expecting. I'll post some thoughts on it after I've had it a few days.
I have the Surface case with holster and I like it. It's not too think, but still protective. I've dropped my phone a couple times and it didn't break
jjlangen said:
I decided to order a Surface and give it a try. Showed up today. The TPU part is a lot thinner than I was expecting. I'll post some thoughts on it after I've had it a few days.
Click to expand...
Click to collapse
What's the verdict?
I had one like this (https://www.amazon.com/dp/B01MXDYKP7) on my Galaxy S6 and Moto Z, but would like a little protection on the Pixel.
RyanTX said:
What's the verdict?
I had one like this (https://www.amazon.com/dp/B01MXDYKP7) on my Galaxy S6 and Moto Z, but would like a little protection on the Pixel.
Click to expand...
Click to collapse
That's the holster I was using when I didn't have it in a case. I liked it, but decided to stick with a case. Phone was a little too slippery for me without one.
I ended up returning the Seidio case/holster. For one thing, it was more difficult to get in and out of the holster, although it probably would have loosened up over time. Some of the headphones I have didn't fit the jack with it on, and the lip around the front made it more awkward to use. A lot of it came down to I just didn't think it was anywhere near being worth the price. For me anyhow. I see Amazon has a like new one right now for $21 though.
I'm still using the case/holster combo I linked to in the first post, and it's protected the phone from a few fumbles drops just fine.