[Q] CSC wont stay as BTU changes to KOR? - Galaxy S III Q&A, Help & Troubleshooting

i have GS3 on UK three, I flashed stock XXALF2 with multi csc "BTU (UK) Also contains CSC (CPW DBT ITV KOR XEF XEO) using CF-Root 6.2 & odin
everything went fine but my CSC was still showing as (H3G) so i changed my CSC using *#272*imei# to BTU but when my phone reboots it changes it to KOR! how can i get it to stay as BTU?

in the end i had to resort to this
http://forum.xda-developers.com/showthread.php?t=1124900
but id still like to know the cause of the problem if anyone knows?

Related

Wrong CSC after flashing

I have a SII which has been imported in to New Zealand, it was 2.3.4, with a SMO CSC
Locally there has just been a 4.0.3 upgrade avaliable, I've downloaded the VNZ (Vodafone NZ) and flashed it with odin.
The upgrade to 4.0.3 went great, but the CSC has remained at SMO, so now Keis is reporting that "your device does not support software upgrading via keis"
PDA: I9100XWLP7
phone:I9100XXLPS
CSC: I9100VNZLP2
I've tried the CSC changes, and this only give me the option of the SMO CSC.
Any idea on how to fix this, I would if possible like to have VNZ as the CSC
Greg
flash ur stock rom,its obivious tht the csc will change wat u expect man...an always hav a efs backd up....
wipe using code, after that if still doesnt change flash againusing odin and wipe again using code.
will work, iv seen ics requires twice flashing for csc fix, GB worked usually with one flash and wipe code
*2767*3855#
Essentially its make your mind up time Stick with Kies and official firmware or use Odin .
This attempt to mix and match does not always work .
jje

[Q] PLEASE HELP ! Problem with CSC

Hello,
first, sorry for my Bad English...
So here is my Problem:
Bought S3 in Germany, also CSC = DBT
I flashed Omega V5.1 then i wanted back to origin Firmware, so i used TriangleAway and then flash the original Firmware with DBT (Downloaded it here in the Forum), now the Firmware is on the Phone, but KIES say it is not supportet...
KIES show CSC = EUR
How can this be? I flashed DBT, i can not change it with *#272*imei#, because there is only EUR to select
CAN PLEASE ANYBODY HELP ?!?!?
I recently wanted to change my csc to make my s3 updatable via KIES. Found that if I flashed to the UK (BTU) stock, when I did *#272*imei#, it presented me with many more options than my actual carrier stock.
I used to have an ATL CSC (Vodafone Spain) and I flashed my phone with the German firmware. After flashing it, I still had the ATL CSC but I did a hard reset and now it's DBT. So, I recommend you to do a hard reset but bear in mind you'll lose everything you have: SMS, contacts, etc.
Roastario said:
I recently wanted to change my csc to make my s3 updatable via KIES. Found that if I flashed to the UK (BTU) stock, when I did *#272*imei#, it presented me with many more options than my actual carrier stock.
Click to expand...
Click to collapse
Whst network were you on before?

ICS SEK but should be XEU

i just flashed my galaxy s2 with stock ICS here is a link to the firmware i used
but when i connected my phone to KIES to check the firmware it said SEK when i flashed an XEU stock uk and ireland rom, how can i get it back to XEU?

[Q] Change of ROM and Unknown CSC

Hi, first post, but have been using all the helpful info from the forums for 6 months now with my TF201, this is related to my new i9300. I'll try to be as descriptive as I can:
Black i9300 purchased last week in the UK, but currently has the TGY (Hong Kong) CSC code. I tried flashing to the UK JB ROM on Sammobile but came back with an unknown CSC error. Fair enough. I followed some instructions i found to get to BTU CSC code:
Flash back to BTU ICS
Flash BTU CSC package
Use Galaxy CSC changer to select BTU
Reboot, now with a fully working ICS build, and BTU CSC (I9300OXAALF2).
However at this point i wasn't able to find any official OTA updates and Kies told me that my device was not compatible with kies updates.
Flashed the original JB UK ROM I downloaded and now i'm back with the unknown CSC.
Any ideas? I've already tried flashing the CSC package onto JB and that's not worked, so now i'm really stumped. As far as I can tell i've removed all HK CSC codes from my device as it was happy as BTU with ICS...
Thanks

[Q] CSC in recovery, differente from firmware CSC

After some flash (4.1.2 PHE, PHN, BTU and now ITV) on my S3 GT-I9300, ITA NoBrand, everything is OK.
I was happy for the MH1 PHN version, but it seems like the modem was not good here in Italy... I was not able to surf on the internet very fast... everything seems to be ok now with the ITV firmware MG4. But...
From *#1234# key combination, I see the right version for firmware and CSC (ITV).
Why, when I start the phone in recovery, it's saying multiCSC applied..... and then it select the PHE csc????
I know this is not a problem, excempt for KIES updates detection, but... how can I reset to CSC right for my phone? (ITV)
Why the PHE is selected in recovery? Maybe PHE firmware was different?
Thanks

Categories

Resources