Does any one if the US version of the Galaxy will support all this USB OTG features shown on video below.
The reason why I ask is because all this test were done with a Exynos processor but we will have a Qualcomm Snapdragon S4 processor.
For those of you who don't know what USB OTG is, basically allows you to connect external hard drives, flash drives, controllers, etc.
Check the video below for more info:
http://www.youtube.com/watch?v=46IiRyigUH0&feature=related
moshe22 said:
Does any one if the US version of the Galaxy will support all this USB OTG features shown on video below.
Click to expand...
Click to collapse
I don't know about all of those features, but basic USB-OTG (mounting an external USB drive via dongle) works for the AT&T version (SGH-i747) and so almost certainly does for the T-Mobile version as well.
yes it works on the tmobile version. i can confirm ive done it.
Go into /mnt in a root explorer and you'll see that it will work, it has mnt places for like 5 usb drives.
Related
I have a USB OTG cable but it doesn't work .
I have rooted 2.3.5 rooted phone.
Do I need to enable any settings on the phone to activate it?
Sent from my GT-I9100 using Tapatalk
intrancer said:
I have a USB OTG cable but it doesn't work .
I have rooted 2.3.5 rooted phone.
Do I need to enable any settings on the phone to activate it?
Click to expand...
Click to collapse
Define "doesn't work". What're you trying to plug into it?
Most things you plug into it will need more power, so you'll need to run them off a hub unless it's a very low-powered device like a usb memory stick.
I think the thread author was pretty clear. "Doesn't work" means that it is not working. How hard is that to understand?
Look here:
http://www.chainfire.eu/articles/103/_SGS2_KI_Samsung_removes_USB_host_support_patches_bootloaders/
It would be great to have it back...
ROM developers, can you do it?
Thanks
Sent from my GT-I9100 using Tapatalk
I am having the same problem.
Got my cable today and can´t get it to work.
Nothing shows when i connect pen drives, tried 3.
I am using 2.3.5 XWKJ1, ROOTED
THANKS.
I read from somewhere that 2.3.5 took away OTG support. You have to use a ROM that supports it. Also, if you want to mount a NTFS partition, you need the fuse.ko specifically compiled for your kernel version. For instance, Siyahkernel comes with its own fuse.ko. The regular fuse.ko you find in this forum would work for he CF-root kernel while none is compiled for the TWD kernel yet. FAT32 should mount automatically.
It works for me. Except NTFS files won't show up in gallery automatically. I have to use es file explorer to open.
dikai_yang said:
I read from somewhere that 2.3.5 took away OTG support. You have to use a ROM that supports it. Also, if you want to mount a NTFS partition, you need the fuse.ko specifically compiled for your kernel version. For instance, Siyahkernel comes with its own fuse.ko. The regular fuse.ko you find in this forum would work for he CF-root kernel while none is compiled for the TWD kernel yet. FAT32 should mount automatically.
It works for me. Except NTFS files won't show up in gallery automatically. I have to use es file explorer to open.
Click to expand...
Click to collapse
Thanks for helping.
Looking around can´t find a rom that says OTG working or 2.3.5 does not support usb OTG.
I´ll try to install 2.3.3 to see if works or the cable i have got might be faulty.
As far as I know every custom rom except the stock rom will support OTG, at least for FAT32-formated sticks. USB sticks work for me in both NTFS and FAT32. I attempted to mount a solid state drive but failed. The SSD light is lit only for half a second. I guess the phone doesn't have enough juice to power a SSD. I haven't tried putting it in an enclosure that supports external power though.
dikai_yang said:
As far as I know every custom rom except the stock rom will support OTG, at least for FAT32-formated sticks. USB sticks work for me in both NTFS and FAT32. I attempted to mount a solid state drive but failed. The SSD light is lit only for half a second. I guess the phone doesn't have enough juice to power a SSD. I haven't tried putting it in an enclosure that supports external power though.
Click to expand...
Click to collapse
Buy a SATA to USB converter, and connect the USB one to your phone.
Then you connect the power connection of your SSD to your PC, start up your PC and it must work
Sent from my GT-I9100
I tried that. It seems sata to USB converters are not supported by galaxy either.
I have a stock 2.3.4 SGII, rooted.
Sata2USB works, as long as the phone doesn`t have to power the device. If I use one of those USB cables that has 2 connectors on one end (1 is for additional power) and let the PC power the USB device, the phone works perfectly with external HDDs.
I haven`t tested NTFS yet, but it works perfectly withg FAT32, ext 2/3/4, either on usb drives or external HDDs.
The only problem is that non-FAT32 partitions must be manually mounted.
how do i enable the OTG mode on the Galaxy SII running android 4.0.4 (resurrection remix ICS 1.8 ROM) and i have a kernal that claims its working with OTG ( http://forum.xda-developers.com/showthread.php?t=1574672&highlight=otg ) but when i connect my cable and usb stick ( tried other devices) nothing happens! any help would be much appreciated
I just acquired a 'micro-B USB OTG' cable myself (a cheap knock-off from eBay).
As far as USB drives are concerned, I have found that I must insert a USB thumb drive into the cable before inserting the cable into my GS2. Otherwise it will not be recognized.
When inserting the cable + thumb-drive I get these two messages:
"USB connector connected" immediately followed by
"USB Mass storage connected"
and I am able to use the USB drive.
I have successfully been able to connect a 1 GB Kingston DataTraveler II, but - oddly - not a 4GB Kingston DataTraveler. An unmarked 8GB USB drive was also recognized.
I have not been able to connect: a Microsoft Comfort Curve Keyboard 2000 v.1.0 (not that I need it, but just to see if it would); and neither an HP mouse. For previous versions of Android (before ICS) you can easily find information of users successfully connecting all sorts of things including keyboards, mice, and larger hard drives.
A few other important issues are:
- File format for drives must be FAT32
- Before removing the cable+drive, remember to unmount drives by opening the notification area and click on "USB mass storage connected".
that helped me out.....not what so ever.
what is OTG btw?
On-The-Go, lets you plug in USB devices like mice , keyboards, and usb sticks into your phone like a computer
tutchthesky7 said:
how do i enable the OTG mode on the Galaxy SII running android 4.0.4 (resurrection remix ICS 1.8 ROM) and i have a kernal that claims its working with OTG ( http://forum.xda-developers.com/showthread.php?t=1574672&highlight=otg ) but when i connect my cable and usb stick ( tried other devices) nothing happens! any help would be much appreciated
Click to expand...
Click to collapse
If the USB is partitioned as FAT32 a nifty notification will show and you can press that and then browse.
However, if the USB is partitioned as NTFS, you should open a file manager with root access (Root Explorer or ES File manager to name a few) and browse to /mnt/ntfs/ and you should see your files there.
Note: Am only assuming this is the mount point, since looking at the kernel you are using, he mentioned gokhan for the USB OTG and I am using his kernel (Siyah)
I've been wanting to ask this for a while now. I have a USB OTG for my Galaxy Tab 10.1 and it's able to recognize my 1gb and 4gb drives. However, when I try my higher capacity 16gb and 32gb drives it says "high powered device connected" and doesn't open them like it would on my lower capacity drives. I read somewhere that Android is only able to recognize 4gb usb drives with a FAT file system. Not sure how true it is but my tab has 4.0.4 ICS stock rom on it. Also, it doesn't recognize my wired mouse and says it's also a high powered device.
Anyway my focus is on the flash drive. How do I make it recognize higher capacity drives? And can anyone recommend brands that work? Thank you.
ljcool_17 said:
I've been wanting to ask this for a while now. I have a USB OTG for my Galaxy Tab 10.1 and it's able to recognize my 1gb and 4gb drives. However, when I try my higher capacity 16gb and 32gb drives it says "high powered device connected" and doesn't open them like it would on my lower capacity drives. I read somewhere that Android is only able to recognize 4gb usb drives with a FAT file system. Not sure how true it is but my tab has 4.0.4 ICS stock rom on it. Also, it doesn't recognize my wired mouse and says it's also a high powered device.
Anyway my focus is on the flash drive. How do I make it recognize higher capacity drives? And can anyone recommend brands that work? Thank you.
Click to expand...
Click to collapse
Try this hack. Instead of inserting the OTG first then the USB, try it the other way round. The USB into the OTG then the OTG to tab. Or just install a new ROM.
Hi Forum. I've tried to connect an OBDII scan tool unsuccessfully using OTG cable. Then I looked up the specifications and found the V10 does not support USB host mode. The V10 does not support USB host mode ?
I use my OTG cable all the time with USB drives and micro SD cards.
Not sure if that's different than what you're trying to do.
My obd II reader is bluetooth so I can't test that.
Sent from my LG-H901 using Tapatalk
Connected my OTG cable with a Flash Drive attached and it worked for me. I was able to read the FD's contents using ES FIle Explorer.
OTG with flash drives and SD readers works fine for me.
Works well for me with flash drives and portable storage devices.
Works great for me hooked to my DSLR!!!
I bought and returned this tablet in the first week it came out because my unit appeared to be missing OTG functionality. I used it with 2 different USB-C to USB adapters and could not make it work.
At the time, a couple of senior members on XDA got OTG to work so I assumed I had a bad unit. Since it's been about a month since it's out, wanted to find out if others have consistently been able to get OTG to work. I see from other posts that usb-to-HDMI does not work, but have all of you been able to use OTG to connect to usb drives? If so, could you share which adapters you are using? Thanks..
I was having some OTG USB 3.0 issues, the sticks worked on my OnePlus 3, but were not detected by the tablet... had me worried, but it was simply a case of reformatting the USB sticks on my PC and it all worked again.
I have 2 different USB3-to-USBC OTG adapters and both work w/o any problems on my S3. I've used them for thumb dives (USB2) and USB wireless mice. Unfortunately I cannot recall their specific model numbers as I've had them both for 6+ months, but their brand is stamped on them. One is a white Insignia that I probably bought at Best Buy and the other is a black "Cable Creation".
No matter which brand of usb stick. The only important thing is file format. I don't known for the Tab S3, but at this day all Samsung smartphones and tablets I've tested only recognize FAT32 and EXFAT file format. I've tested this on Galaxy S4 S5 S5 Mini S7 J5 and TAB S S2 S2 VE A10.1 2016.
NTFS file format is NOT recognized BUT on some devices you can read it with ES FILE EXPLORER (maybe other file browsers too but I didn't try them).
For me if you don't root your device, the only two limitations on Samsung devices weres unability to read NTFS and no DTS and AC3 audio CODEC.
Both problems can be solved, NTFS by ES FILE EXPLORER, and DTS/AC3 by MX PLAYER CUSTOM CODEC which can be found on XDA Developpers.
Greetings to XDA!
I've tested USB OTG on Galaxy Tab S3: like other Samsung devices it reads FAT32 and ExFAT file formats but doesn't recognize NTFS.
Anyway like I've told before you can use ES FILE EXPLORER to access to NTFS USB drives.
radioham said:
I've tested USB OTG on Galaxy Tab S3: like other Samsung devices it reads FAT32 and ExFAT file formats but doesn't recognize NTFS.
Anyway like I've told before you can use ES FILE EXPLORER to access to NTFS USB drives.
Click to expand...
Click to collapse
IIRC, OCZ usb drives were notorious.
diehard2013 said:
IIRC, OCZ usb drives were notorious.
Click to expand...
Click to collapse
"OTG" is not a brand.
It means "On The Go".
Any brand can work with the right file format.
It's the same with USB micro SD cards.
I just got a usb-c otg cable today & was trying a few usb drives and ssds with the tab s3. All worked except one of the ssd's (exFAT). It appeared to be not getting enough enough power from the usb port. I charged the tab to full & re-tried the failing ssd: it then worked. For what it's worth I'd noticed similar behaviour with the same ssd on a tab s2: sometimes it would work, sometimes I'd have to connect a usb power bank using a usb y splitter cable. My tab s3 firmware is AQBB and rooted.
sirscrubsalot said:
My current device info [Samsung Galaxy Tab S3 T820, WiFi]: (kernel version: 3.18.31 Flash-KernelV1.1+) / Android Version : 7.0 / build number: NRD90M.T820XXU1AQI2, Android Security Patch: August 1, 2017, SE for Android Status: Permissive / twrp_3.1.0-1_sm-t820_AQD6 + no-verity-no-encrypt_ashyx + SuperSU v2.82 SR5 Beta
Click to expand...
Click to collapse
Has anyone here been able to get OTG-External NTFS HDD detection and mounting to work with this kernel that is said to have NTFS support in its kernel (I know by default, it's only ExFat/Fat32):
[SM-T820,825] Flash-Kernel V.1.1 Permissive, Wifi Fixed [NTFS + USB-OTG Support]
https://forum.xda-developers.com/ga.../sm-t825-flash-kernel-0-1-permissive-t3692328
Since this kernel has SE Linux permissive permissions, I thought Stickmount Pro-Root would work but all it does is detect the drives to mount but then samsung disables them as corrupt and switches to charging mode.
I outlined in much more detail in comments: #23, #25, #27 in the link above - I wanted to get MX Player Pro to load and play my media found on the external NTFS drives that are on a powered USB hub and USB-C OTG. I could easily do this with over 20TB's of multiple external NTFS hdd's on my 2012 Nexus and other nexus/motorola devices. The OTG-C cables I have (2 different that I use) are fine as they work on the other non-samsung devices.
There are other custom ROM's for the galaxy tab s2 which can mount NTFS hdd's like above. Hopefully we can get some others to share their experience and knowledge to troubleshoot.