Hi.
I was plaing with the CM9 A4 release and decided to go back to my regular setup. Well my nandroid some how got wiped so that left me doing it all from scratch.
I done all the prorper steps of goning back to 2.3.4, rooting, upg, and flashing Eclipse.
Sigh...
Well now when i try to open an app in my phone it FC's immediately. Worse thing is the settings / file manager does this as well. I tried shutting down and booting the Android Recovery and doing a factory retore / data wipe and when it came back up and I get it setup (still in eclipse) I get the same thing.
I thought about ADB to the phone with BSR and see if I could get that to boo but ADB doesn't see my device or I am not doing something right there. (I can switch the USB modes) I am thinking it doesn't see the phone because I can't get into Setting to enable Debug and Third Party Installs.?
Please, any and all help is appreciated as I am at a lost here.
Thanks, Slim!
SlimMan said:
Hi.
I was plaing with the CM9 A4 release and decided to go back to my regular setup. Well my nandroid some how got wiped so that left me doing it all from scratch.
I done all the prorper steps of goning back to 2.3.4, rooting, upg, and flashing Eclipse.
Sigh...
Well now when i try to open an app in my phone it FC's immediately. Worse thing is the settings / file manager does this as well. I tried shutting down and booting the Android Recovery and doing a factory retore / data wipe and when it came back up and I get it setup (still in eclipse) I get the same thing.
I thought about ADB to the phone with BSR and see if I could get that to boo but ADB doesn't see my device or I am not doing something right there. (I can switch the USB modes) I am thinking it doesn't see the phone because I can't get into Setting to enable Debug and Third Party Installs.?
Please, any and all help is appreciated as I am at a lost here.
Thanks, Slim!
Click to expand...
Click to collapse
well, if it boots, you can get into RSD mode, thus you can sbf back to 2.3.4
antp121 said:
well, if it boots, you can get into RSD mode, thus you can sbf back to 2.3.4
Click to expand...
Click to collapse
Ha! I wasn't even thinking about that, you are right. Thanks for having the level head and thinking about that.
Slim!
SlimMan said:
Ha! I wasn't even thinking about that, you are right. Thanks for having the level head and thinking about that.
Slim!
Click to expand...
Click to collapse
Haha np. Mine won't even boot :/ I tried to make an aokp build and it didn't even boot... Now I have to charge it up and wait......
Sent from my ADR6425LVW using Tapatalk 2
antp121 said:
Haha np. Mine won't even boot :/ I tried to make an aokp build and it didn't even boot... Now I have to charge it up and wait......
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Ouch! that sux!
GL, Slim!
Oh wow, sorry for going off topic, but aokp on the X2 sounds sweet!
raymond513 said:
Oh wow, sorry for going off topic, but aokp on the X2 sounds sweet!
Click to expand...
Click to collapse
Yeah. A guy by the name of X13thAngelX on twitter is currently working on a gummy port and then an aokp port. I forked his repos and stuff on github so I could help out. Seems like he's done ALOT of work. You guys are in for a treat
Sent from my aokp_tenderloin using XDA Premium HD app
Nice, I've used angels roms on D2G and D2, good stuff
Sent from my MB870 using xda premium
Related
Droid X2, preinstalled with 2.3.3 The phone belongs to a dear friend, and I've screwed it up apparently. I finally got it rooted via Visionary this morning, remarkably easy once I took the time to actually read. Quick and painless flash of Eclipse 0.5, and then onto apps, mods and 'pretties'. Well the last thing I tried to do before turning it back over to its owner, I tried to change the font. Apparently this is where I went wrong. It's been a soft brick ever since. It will load the "M Dual Core" screen, and that is absolutely it. I can navigate into recovery but whatever Nandroid I had created isn't showing up there. Please tell me there's something I can do, I've tried SBFand whatever, but I'm sure I'm not doing it right. I'd be willing to sling a few bucks your way if you were able to help get remedied. Thanks in advance. We can do text chat, or voice. I'll be home from work around 9pm Central Time. Thanks so much.
If you created a nandroid, you might not be able to find it because Eclipse 5 swaps the sd cards. Try again and you may find it in the opposite directory.
If you ate trying to this thru stock recovery (holding buttons when booting) then you won't be able to restore from there. At this point our only option is BSR, the thing you used to flash eclipse. To get there, power the phone off and then plug it into a wall charger. If it loads, you can do a wipe or restore from there.
You might also be able to wipe data from stock recovery.
Sent from my DROID X2
3UR0TR45H said:
If you created a nandroid, you might not be able to find it because Eclipse 5 swaps the sd cards. Try again and you may find it in the opposite directory.
If you ate trying to this thru stock recovery (holding buttons when booting) then you won't be able to restore from there. At this point our only option is BSR, the thing you used to flash eclipse. To get there, power the phone off and then plug it into a wall charger. If it loads, you can do a wipe or restore from there.
You might also be able to wipe data from stock recovery.
Sent from my DROID X2
Click to expand...
Click to collapse
What worries me is that I have noticed that when I flash eclipse after a data wipe it seems as though I have to go use system recovery app and press install recovery first again before I can get BSR to show up again with off phone plugged in. Hope this isn't what happen to OP or else sbf is only option.
And if u r sbf make sure on ur phone u r using power and vol up to get where u need to be to sbf. And plug phone into computer AFTER opening rsdlite.
chattguy said:
I finally got it rooted via Visionary this morning, remarkably easy once I took the time to actually read.
Click to expand...
Click to collapse
There is an app that works to root 2.3.3 on the x2 without a pc?
Edit: everything I could find easily on that visionary app says it only works on 1.7 firmware and under, and all the posts are over a year old. Not sure how he got this to work for him
Sent from my DROID X2 using XDA App
EvilTim said:
There is an app that works to root 2.3.3 on the x2 without a pc?
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
I was wondering exactly same thing. If yes OP needs to post a link ASAP for testing and confirmation immediately
I think that visionary root app is what may have him in a bind at the moment... He definitely needs to post where he got it and what he read to lead him to believe it would work... His only option, IMHO, is to sbf and go from there....
DAG425 said:
I think that visionary root app is what may have him in a bind at the moment... He definitely needs to post where he got it and what he read to lead him to believe it would work... His only option, IMHO, is to sbf and go from there....
Click to expand...
Click to collapse
Oh c'mon, quit shamelessly plugging your sbf thread.
All joking aside you're probably right
Sent from my DROID X2 using XDA App
EvilTim said:
Oh c'mon, quit shamelessly plugging your sbf thread.
All joking aside you're probably right
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
LOL! What you want me to post the whole tutorial for the guy here??? But can you really blame me??? I have become a full believer in SBF'ing for any issue I run into tho...
If "system recovery" is installed and "recovery mode" has been set(if only once) then a "battery pull" and a "plugging in" of the charger will trigger BSR. But not if "charge mode" was last cmd exec.
Batt pull may screw up dates when restoring, so it is best to set recov. mode each time needed.
EvilTim said:
There is an app that works to root 2.3.3 on the x2 without a pc?
Edit: everything I could find easily on that visionary app says it only works on 1.7 firmware and under, and all the posts are over a year old. Not sure how he got this to work for him
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Yeah, no sleep for 3 days, that's why I said that. I meant to say, the Pete Souza Method. But yeah I got it all fixed with DAG425's SBF Tutorial. It was probably the easiest to wrap my mind around, well thought out tutorial.
In a side note, regretfully I seem to have fallen for the X2....sorry HTC. lol
http://twitter.com/?photo_id=1#!/dragonzkiller/status/136892104482893825/photo/1
Sweet! But he has it plugged in, so I'm not holding breath just yet...
Sent from my DROID X2 using XDA App
He said he can boot into recovery unterhered. I will try to find the tweet.
Here it is: https://mobile.twitter.com/#!/dragonzkiller/status/136953502332227585
Sent from my DROID X2 using xda premium
Hell I don't care if I have to plug it in to boot into recovery. If it means we can take another step forward I will stand on my head to boot if it means finding the right work arounds to getting other roms like maybe cm7 or who knows.
Sent from my DROID X2 using XDA App
My bad! That's great news!
Sent from my DROID X2 using XDA App
nice... I was actually looking into this earlier today to see how the actual recovery worked(what was replaced with what) and was gonna try to look into it.
Most excellent news!
Last test build a few of us tried wouldn't allow us to restore a backup. Issues w/ not being able to unmount /system I believe. Other than that, it was working great!
X0dus said:
Last test build a few of us tried wouldn't allow us to restore a backup. Issues w/ not being able to unmount /system I believe.
Click to expand...
Click to collapse
Well, almost there...
X0dus said:
Other than that, it was working great!
Click to expand...
Click to collapse
(Smart ass here...) Okay... Working great... That's kinda like being able to put all your money in a bank, but not having the ability to withdraw it...
Okay, okay, okay... This really is great news! I really like CWM, got used to it when I was running a Samsung Continuum.
Ciao!
Moon Shadow - NM said:
Well, almost there...
(Smart ass here...) Okay... Working great... That's kinda like being able to put all your money in a bank, but not having the ability to withdraw it...
Okay, okay, okay... This really is great news! I really like CWM, got used to it when I was running a Samsung Continuum.
Ciao!
Click to expand...
Click to collapse
....
Flashing edify fine. Wiping fine. Backup just fine. Mounting and unmounting work just fine. Working great to me and my appreciation goes to dragonz for trying to get this fully functional for us.
Sent from my DROID X2 using xda premium
X0dus said:
....
Flashing edify fine. Wiping fine. Backup just fine. Mounting and unmounting work just fine. Working great to me and my appreciation goes to dragonz for trying to get this fully functional for us.
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
So when will it be ready for mass consumption? I'm frothing at the mouth...
When it can unmount system and restore...
the.process to get that to work can be a very long process...I was looking at his log sheet he.posted last night and it is getting pretty long. Meaning it can take a while just to sift thru and see what went wrong or what needs changing ....patience will DEFINITELY be a virtue with this. U might fare well by forgetting you saw this and just being surprised one day when the subject comes up again
ashclepdia said:
When it can unmount system and restore...
the.process to get that to work can be a very long process...I was looking at his log sheet he.posted last night and it is getting pretty long. Meaning it can take a while just to sift thru and see what went wrong or what needs changing ....patience will DEFINITELY be a virtue with this. U might fare well by forgetting you saw this and just being surprised one day when the subject comes up again
Click to expand...
Click to collapse
+1
Sent from my DROID X2 using xda premium
Im pretty happy with my current eclipse 1.3, ics theme and my zeam launcher. Oh and powerboost mod too. Nice combo to me still hope one day we will be able to load cm7 on here. I don't like the locked boot but I love my x2. Might be my last motor. Might not. I just want a phone that's bugless and smooth. With theming capabilities.
The combo I have now is both so despite a locked boot im a happy x2 owner.
Thank you devs for your hard work and making it possible for me to be happy with my x2 without you I would brought it back and swapped for a samsung lol
Sent from my DROID X2 using XDA App
motcher41 said:
Im pretty happy with my current eclipse 1.3, ics theme and my zeam launcher. Oh and powerboost mod too. Nice combo to me still hope one day we will be able to load cm7 on here. I don't like the locked boot but I love my x2. Might be my last motor. Might not. I just want a phone that's bugless and smooth. With theming capabilities.
The combo I have now is both so despite a locked boot im a happy x2 owner.
Thank you devs for your hard work and making it possible for me to be happy with my x2 without you I would brought it back and swapped for a samsung lol
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
which powerboost mod are u running?
I have been waiting for 2.10 to drop.
I was also thinking of donating and getting the RC others have gotten. but I need to wait til friday to donate ;( I think the final might be out by then anyways but im still gonna donate
2.0 fixed y? It wouldn't flash so I just did it by hand. Everything installed in seems to be working. Even the power boost mod check that it was working. I would definitely upgrade when it comes out but this 1 seems to be working fine. Internet seems a lot more responsive.
Sent from my DROID X2 using XDA App
motcher41 said:
2.0 fixed y? It wouldn't flash so I just did it by hand. Everything installed in seems to be working. Even the power boost mod check that it was working. I would definitely upgrade when it comes out but this 1 seems to be working fine. Internet seems a lot more responsive.
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
yeah I was just wondering. thought maybe u had gotten the rc that he has at the moment(its going to people who donate)
was wondering if it was flashable yet.
im mainly just interested in the unthrottle. since I know im being throttled . I can see it im my tests. I am definitely a victim of "network optimization " lol. can't wait to be free if that.
ashclepdia said:
yeah I was just wondering. thought maybe u had gotten the rc that he has at the moment(its going to people who donate)
was wondering if it was flashable yet.
im mainly just interested in the unthrottle. since I know im being throttled . I can see it im my tests. I am definitely a victim of "network optimization " lol. can't wait to be free if that.
Click to expand...
Click to collapse
Yeah I live in the middle of BFE so anything that's helps me since my only internet is my phone.
So I have 2 touchpads and have installed android on 3. One of them however, cwm won't even install anything. Its really weird. I ended up having to uninstall everything android and stick with webos. Any ideas on what to do? Or do I have a hardware issue and just stuck with webos. Not that webos is bad and I mainly use the tablet as an internet device to pull up diagrams and such for working on my cars. But it would be nice to have Android on it. Anyone else run across this issue?
I removed Android from the device.and redid the install via acmeinstaller, and considering I have done it on two other devices with no issues makes me.wonder what happened on this last one. Android was rebooting a lot so I tried a wipe and reinstall the rom but cwm would reboot itself seconds after hitting the rom folder to execute the rom installation.
Sent from my SGH-T989 using XDA App
tackleberry said:
So I have 2 touchpads and have installed android on 3. One of them however, cwm won't even install anything. Its really weird. I ended up having to uninstall everything android and stick with webos. Any ideas on what to do? Or do I have a hardware issue and just stuck with webos. Not that webos is bad and I mainly use the tablet as an internet device to pull up diagrams and such for working on my cars. But it would be nice to have Android on it. Anyone else run across this issue?
I removed Android from the device.and redid the install via acmeinstaller, and considering I have done it on two other devices with no issues makes me.wonder what happened on this last one. Android was rebooting a lot so I tried a wipe and reinstall the rom but cwm would reboot itself seconds after hitting the rom folder to execute the rom installation.
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
Try this rom.
http://forum.xda-developers.com/showthread.php?t=1321335
Even though it is also based on Cm7 you might be lucky. Just follow the instructions to the later as posted.
Good luck.
geomens said:
Try this rom.
http://forum.xda-developers.com/showthread.php?t=1321335
Even though it is also based on Cm7 you might be lucky. Just follow the instructions to the later as posted.
Good luck.
Click to expand...
Click to collapse
That's the rom I have on all of them and used on the one that dodnt work right. The problem is cwm for some reason.
I used the same downloads for each of my touchpads, the only variable is the touchpad. Its really weird. It loaded the first time, but after that it was a dud. Weird
Sent from my SGH-T989 using XDA App
tackleberry said:
That's the rom I have on all of them and used on the one that dodnt work right. The problem is cwm for some reason.
I used the same downloads for each of my touchpads, the only variable is the touchpad. Its really weird. It loaded the first time, but after that it was a dud. Weird
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
Very Weird indeed. I have installed it on 3 Touchpads and they are all working well.
just wondering when u removed Android did u use the ACMEuninstaller?
Have you tried to use web doctor? Were I you I'd give that a shot.
colin_404 said:
just wondering when u removed Android did u use the ACMEuninstaller?
Click to expand...
Click to collapse
Yes. Sure did. That's the only method I'm aware of.
Sent from my SGH-T989 using XDA App
a40dayflud818 said:
Have you tried to use web doctor? Were I you I'd give that a shot.
Click to expand...
Click to collapse
Nope. Any link to info on this? Or is it in preware on the webos side?
Sent from my SGH-T989 using XDA App
webosdoctor its only for restoring webos so don't know that it will make much difference. cant give u a link, cause not allowed to but if u take a look on webosbuzz you'll find it all.
before using it, it would be best to remove all preware especially kernels & patches.
colin_404 said:
webosdoctor its only for restoring webos so don't know that it will make much difference. cant give u a link, cause not allowed to but if u take a look on webosbuzz you'll find it all.
before using it, it would be best to remove all preware especially kernels & patches.
Click to expand...
Click to collapse
Agreed. I only mention this to put it back to stock and thereby eliminating any variables. I find his predicament rather odd so I was just saying he should do that and start from scratch. Then the community might be able to help him a little better.
i know not a lot to go on, hard to throw in something useful.
I see. Well, I installed all the preware and other stuff after the android failure. I figured if I'm stuck with webos I better get it working better. Maybe ill just do a factory reset and try again.
Sent from my SGH-T989 using XDA App
well, i wiped out (at least i think i did) all prior andriod stuff. i did a fresh install, from a different computer and so far i got miui installed. lets hope for the best!
SIMPLE WAY TO DO A FULL WIPE BEFORE FLASHING
This zip is flashable in CWM.
Wipe-All-Photon.zip
It will wipe:
/System
/Data (Dalvik Cache is in /Data)
/Cache
Hope this helps
Thanks to XCellPhoneSalesRep for the idea
Ooo it does actually feel like cwm messes up sometimes (or I do) and see older stuff.
Like a script doing it
camwinnn said:
Ooo it does actually feel like cwm messes up sometimes (or I do) and see older stuff.
Like a script doing it
Click to expand...
Click to collapse
I'm amazed it didn't get done before. It works really fast, too. First time I ran it, I didn't think it worked, so I rebooted my phone, and realized it had in fact worked when it wouldn't boot past the Moto signal...LOL
Th3Bill said:
I'm amazed it didn't get done before. It works really fast, too. First time I ran it, I didn't think it worked, so I rebooted my phone, and realized it had in fact worked when it wouldn't boot past the Moto signal...LOL
Click to expand...
Click to collapse
Wow know what you mean now, just jumped roms again (sleep of death keeps following me) was 10x faster then cwm if i hadnt seen you say something probably would have opened up the zip to make sure it actually did something lol
camwinnn said:
Wow know what you mean now, just jumped roms again (sleep of death keeps following me) was 10x faster then cwm if i hadnt seen you say something probably would have opened up the zip to make sure it actually did something lol
Click to expand...
Click to collapse
LOL! I was amazed as well. When I didn't get an error but just saw the ui_prints I put come up and saw how fast it went, I was like "Damn, it didn't work..again" (truth be told, I tried 20 configurations before I got it to wipe everything), rebooted and saw Moto for 5 straight minutes and realized "I guess it did afterall...LOL"
Which rom you on now? I've been on CM9 since 0.2.0 (now on 0.3.1), and with the latest kernels from Olegfusion and Peetr, it's smooth as glass
Th3Bill said:
Which rom you on now? I've been on CM9 since 0.2.0 (now on 0.3.1), and with the latest kernels from Olegfusion and Peetr, it's smooth as glass
Click to expand...
Click to collapse
The same using since 0.1, ICS was the reason updated my phone to the photon Optimus One was rough, that and the guy who owned it got fired from my parents company an since ending it would be just as expensive as keep it on its mine.
So instantly rooted, cwm, ICS so don't really know if its a preexisting issue or not but I've slowly gotten SOD on everything, even 2.3 roms. Why I was wondering if cwm was maybe not properly clearing data.
I have this same type of flash on all my devices. When i flash a new rom, i usually flash on all my devices at the same time. I start with my MoFo and while that is doin its thing, i would flash my other devices and go back to the MoFo in between. By the time i am done flashing my last device, i can finally flash my Mofo. Multitasking Now i gotta come up with a new process...
Fixing.....used wrong updater script...fixed one in post 13
Sent from my MB855 using xda premium
Thanks. I was wondering why there wasn't one available for the Mopho. CWM used to have trouble fully wiping my Evo 4g sometimes and it was handy having a zip for it.
Th3Bill said:
For those of you just looking to wipe Cache and Dalvik, use this one:
Cachd-Dalvik-Wipe-Photon.zip
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Link gives 404error.
MoPhoACTV Initiative
moonzbabysh said:
Link gives 404error.
MoPhoACTV Initiative
Click to expand...
Click to collapse
Fixed the link
Sent from my MB855 using xda premium
SORRY
To anyone who downloaded the original "Cache-Dalvik-Wipe-Photon.zip", it will not work...I got my updater-scripts mixed up and used the one for an install....LOL I am in the process of updating the link and will have it back up shortly...with the correct script of course
Sorry again, guys
Cachd-Dalvik-Wipe-Photon.zip
This is corrected file
Sent from my MB855 using xda premium
Th3Bill said:
Sorry again, guys
Cachd-Dalvik-Wipe-Photon.zip
This is corrected file
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Awesome, thanks. now I get to use it in a few, joker just uploaded 3.2, in the great words of the kool-aid guy, Oooooh Yeaaaah
MoPhoACTV Initiative
moonzbabysh said:
Awesome, thanks. now I get to use it in a few, joker just uploaded 3.2, in the great words of the kool-aid guy, Oooooh Yeaaaah
MoPhoACTV Initiative
Click to expand...
Click to collapse
I'd use full wipe...never know how much he changed...
Also, watch out...apn-conf not changed, so you'll still have to edit your apns manually after if you don't replace the file...I'd still replace the file in the rom, as for some reason, the apns sometimes fall out...since that file will set it up right from start, it won't disappear
Th3Bill said:
I'd use full wipe...never know how much he changed...
Also, watch out...apn-conf not changed, so you'll still have to edit your apns manually after if you don't replace the file...I'd still replace the file in the rom, as for some reason, the apns sometimes fall out...since that file will set it up right from start, it won't disappear
Click to expand...
Click to collapse
Oh I know, I'll be using the full wipe zip to flash the rom, and then the cache/dalvik cache zip for all the tweaked apps and such that I'll be doing throughout the day to get my MoPho set up how I like her . For the apns' I just set them up manually, even though replacing the file would v easier, when I do them I like to physically make the changes, little OCD tendency I guess lol. Again thanks for these.
MoPhoACTV Initiative
moonzbabysh said:
Oh I know, I'll be using the full wipe zip to flash the rom, and then the cache/dalvik cache zip for all the tweaked apps and such that I'll be doing throughout the day to get my MoPho set up how I like her . For the apns' I just set them up manually, even though replacing the file would v easier, when I do them I like to physically make the changes, little OCD tendency I guess lol. Again thanks for these.
MoPhoACTV Initiative
Click to expand...
Click to collapse
APNs don't edit in this version...have you tried yet? It lets you select the APN, but it doesn't open the portion to edit...
Easy way to fix....replace the "APN" file I put up, and go into APNs and have it "reset to default"...the system should read that xml file and appropriately edit it...
Th3Bill said:
APNs don't edit in this version...have you tried yet? It lets you select the APN, but it doesn't open the portion to edit...
Easy way to fix....replace the "APN" file I put up, and go into APNs and have it "reset to default"...the system should read that xml file and appropriately edit it...
Click to expand...
Click to collapse
Oh no shyt, titanium is still backing up all my stuff so I haven't flashed yet, then have to do a Nandroid. You fricken rock, grabbing your apn file before I flash.
MoPhoACTV Initiative
moonzbabysh said:
Oh no shyt, titanium is still backing up all my stuff so I haven't flashed yet, then have to do a Nandroid. You fricken rock, grabbing your apn file before I flash.
MoPhoACTV Initiative
Click to expand...
Click to collapse
I've edited rom and am uploading it to mediafire...I'll send you a link as soon as I get it up...stupid dsl...LOL
Dead links....
Hey, I opened eclipse parts to open bootstrap recovery and once I pressed recovery mode it acted like it was going to reboot into it normally but it just hung on the red M screen and I had to do a battery pull to get my phone running again. What caused this this time? About a week ago I had to sbf to 2.3.4 and reroot 2.3.5 then I just restored a eclipse 2.2.1 backup. Since then I flashed eclipse 2.3 over it and everything has been fine. This is the first time I've tried entering recovery though, is something screwed up?
Edit: yup every time I enter recovery it freezes at the M. An no, clicking install recovery does not help even though it says install successful.
Sent from my DROID X2 using xda app-developers app
Are you running v6 supercharger?
Nope, stock Ec. 2.3
Sent from my DROID X2 using xda app-developers app
Hmm, not sure then. You are using the CM7 and not the standard BSR? If so then I'm all out of ideas. lol...all two of them.
Hmm, looks like all of this got covered in the Eclipse thread anyways. Well, I guess you are out of luck and need to SBF. It sucks, but if you have a recent nandroid then it's not the worst thing ever.
Yea when the Dev tells you to wipe... i guess you gotta wipe. Lol thanks for your input.
Did you by chance install bsr before hitting the recovery button?
Sent from my DROID X2 using Tapatalk 2
(Not being a jerk, just saying) yea I said so in my op.
Sent from my DROID X2 using xda app-developers app
Are you doing it this way?
http://forum.xda-developers.com/showthread.php?t=1318083<br />
Yup I've made backups and restored numerous times. The problem isn't not.knowing how to do it, its just that my recovery is suddenly gone. Nothing I can do currently to get the phone to boot into recovery.
Sent from my DROID X2 using xda app-developers app
Sorry to hear that. Hopefully you'll get it sorted.
I had a simular issue with my droid x2 #5 (went threw 6 of them and said i had enough) but what i did was kept clicking install on the bootstrap it seemed to work i did it like 4 times. It also doesnt like to play nice with power strips sometimes. I also deleted the recovery using rootexplorer but i dont recommend that cause things can get all screwed up
Still having trouble?
This happened to me before a while ago.
I let it sit at the red M for what felt like forever and ur finally loaded BSR.
Yea, I've been told to do a wipe and start again but I just dont wanna do that so im hoping it will start working outta the blue lol. I'll try the new suggestions, thanks guys.
Sent from my DROID X2 using xda app-developers app
GoClifGo05 said:
Yea, I've been told to do a wipe and start again but I just dont wanna do that so im hoping it will start working outta the blue lol. I'll try the new suggestions, thanks guys.
Sent from my DROID X2 using xda app-developers app
Click to expand...
Click to collapse
Yea i can definitely understand that
Just be patient with it
Make sure you have good amount of battery AND make sure you are defintly plugged into the wall outlet.
Also, make sure your charger isn't malfunctioning(plug in while phone is turned on, go to settings>Battery, make sure it says "Charging(AC)" and not "Charging(USB)" , I had the OEM charger that came with my x2 basically die on me and that's what happened before it croaked, it wouldn't recognize as being plugged.into a wall charger, and if the device doesn't see AC current coming in, it won't boot into BSR)
Another thing you can try to do is press charge mode within BSR app in Eclipse settings. Then reboot the device(reboot twice for good measure ) go back into settings,.eclipse settings,.bootstrap, and press install recovery(after it says.completed press it again a couple times just to be certain lol , let it tell you competed each time before you press it again) THEN plug phone into wall without leaving app, then press reboot recovery(or recovery mode,.sry.been a while i can't remember exactly what it says lol) and then walk away, go do the dishes or something or take a shower.
Hopefully that will get you in. Good luck!
You can also try doing a cache wipe from stock Android recovery. Never know, that might help, and you won't lose any data but doing that