I bought an Xperia mini for my mother.
She has a Nissan Connect bluetooth system in her car.
First thing I did was update the Xperia mini to ICS, but I think I should not have done that.
I can't connect to the Nissan Connect. It asks for pairing key '1234', and from what I read on Sony forums ICS tries to connect with pairing key '0000'.
I also found a workaround trying to send a vCard over bluetooth and thus forcing the bluetooth pairing. But that doesn't work with the Nissan Connect system.
How can I fix this? If possible, without reverting to GB?
it is because the rSAP script is removed from ics.
you can try this http://www.android-rsap.com/installation/90.html
or this
https://play.google.com/store/apps/details?id=com.android_rsap.rsapinstall
BUT MAKE A NANDROID BACK-UP WITH CMW!!!
Related
Hi, new here.
I have a problem with my x10 mini pro: whenever i try to send a file and turn on the bluetooth, it will stay on for about 5 seconds, then turn off and then do it all over again Is there a way to fix this ?
Thanks
To wich device are u connecting? U probably need to update the bluetooth drivers from that device.
I had the same problem for my bluetooth carkit. The garageshop updated the car's software and problem was gone
Hello, I just bought a Xperia S and I did not reach in connection it to my Built-in bluetooth system (a parrot built-in kit in a Citroen). The pjone can see the system but I'm not able to make the system pairing.
I already had difficulties in the past with an X10 but it was linked to Android 1.6 and with my Samsung Galaxy S2 under Cyanogen7. I have no issue to conenct with Nokia E6, iPhone 4 or Android 2.3.X smartphones (Samsung Galaxy S2, Samsung Galaxy S, HTC Desire,...).
I think that it could come from the BT stack used by Sony or from their Android adaptation and I don't think I would be able to pair the system till an update could be released or perhaps with ICS.
Does somebody has the same difficulty or a solution ?
Best regards
Try to reset the bluetooth in your car.
Sent from my Sony Xperia S-LT26i
I had the same issue with my bluetooth IO player.First time when I added it after that it would not connect. Turned bluetooth off and on and automatically connected. Might be worth restarting your phone. If the phone can add it then it should be able to connect to it.
Hello, I do,'t know where to reset my car BT as it is a built-in. One solution could be to remove the fuse....
It is not a question of connexion as I'm not able to pair the BT device and the Xperia.
I have no issue with all the other phones !!!
I have a 2009 Ford Mondeo and my Xperia S paired with the integrated bluetooth unit without any issues. Can browse phone book and call log without any issues and obviously make/receive calls.
Hi Guys,
Im having a real bluetooth issue with my SXS and Merc...I can connect and pair fine, however randomly the phone keeps disconnecting.. ive had this working fine with a Iphone4s and lumia 800 so i dont think its the MB side of things...can anyone shed some light on this?
Hi everyone,
I am an owner of the GSIII I747M and the ASUS Transformer, both running ICS. I recently had this idea (fantasy?) where I mount the Transformer in my car, hook it up to the car speakers and basically use it as my in-car infotainment system instead of the headunit that's in there. Nothing wrong with my in-car headunit (except the fact that I can't get bluetooth to work with my GSIII), but the tablet will give me tons more features. When I enter the car, I want the tablet to automatically tether to my phone via wi-fi and via bluetooth. Wi-fi is for internet access and it works just fine. The bluetooth is for the hands-free profile, so that when I receive a call, the music/navigation/whatever gets interrupted and I can take the call. I also want to be able to dial from the tablet.
When I connect the two devices via bluetooth, I don't have a hands-free profile; indeed I have no useful profiles at all. My question is simple: is there an app for that? Any suggestions? Has anyone done this? Thanks!
Good afternoon.
I got a simple handsfree bluetooth carkit, wich works as a simple bt headset, transfers call audio to car speakers and nothin more, doesnt sync messages nor contacts, just a simple pair&go.
I had a sonyericson x-10 mini pro with android 2.1 that worked just fine, recently i've aquired a bq aquaris 5hd with jelly bean 4.2.1, and i cant get bluetooth to stay connected.
what happens is, i pair the two devices just fine, but then, they just remain connected for some secs and then connection is disabled, rendering the handsfee kits useless. i reconnect, after some secs it disconnects again. been reading on internet and it seems its a common problem with JB 4.2.1, these bluetooth issues.
my question is, is there any fix i can apply? any app that i can install? anything at all?!
thx for any help
Other phone (Walton Primo X2 with 4.2.1), same issue.
Is there any solution, because no upgrade is planned from the manufacturer.
Thx
MyPass
somebody???
Hi all,
I recently got the xperia z2 and have been having trouble getting the z2 to identify my sony ericsson mw600 via bluetooth. I know i can pair the phone with my laptop and other devices so i dont think its a internal problem. I also know my mw600 headset works with my old phone. Any idea why the z2 might not be seeing my mw600 on the bluetooth screen?
asura000 said:
Hi all,
I recently got the xperia z2 and have been having trouble getting the z2 to identify my sony ericsson mw600 via bluetooth. I know i can pair the phone with my laptop and other devices so i dont think its a internal problem. I also know my mw600 headset works with my old phone. Any idea why the z2 might not be seeing my mw600 on the bluetooth screen?
Click to expand...
Click to collapse
Im not familiar with the headset but some times devices can only be synced with 1 device at a time, does it need to maybe be unlinked then linked with a new device?
SwiftSmoke said:
Im not familiar with the headset but some times devices can only be synced with 1 device at a time, does it need to maybe be unlinked then linked with a new device?
Click to expand...
Click to collapse
I am quite sure the sony ericsson mw600 allows you to pair multiple devices, and besides i broke my other phone so wouldn't be able to unpair it.
the must go into pairing mode first, then use the z2 to scan via bluetooth and connect it.
bluetooth handfree device doesn't require to unpair just pair with another device to overwrite it.
Sent from my GT-I9100 using XDA Premium 4 mobile app
just to clarify -
is the headset in paring mode?
Thank you for someone to notice it and I have the same issue with my DR-BTN200. It shows connected and music plays from external speakers and if it successfully connected then every single notification you get the phone keeps disconnecting it from the headset and plays music from external speakers and then connect it back to bluetooth headset.
HUGE BUG
asura000 said:
Hi all,
I recently got the xperia z2 and have been having trouble getting the z2 to identify my sony ericsson mw600 via bluetooth. I know i can pair the phone with my laptop and other devices so i dont think its a internal problem. I also know my mw600 headset works with my old phone. Any idea why the z2 might not be seeing my mw600 on the bluetooth screen?
Click to expand...
Click to collapse
Don't know if this helps but i have the smart wireless headset pro - mw1 and that works fantastically well. Had some trouble before with my Xperia V but they are all gone now with the Xperia Z2. Just put the headset in paringmode, made the phone visible, erased my old Xperia V from the MW1 and all was good.
Hi all,
Thanks for the input! I managed to solve it. My samsung s3 never needed the mw600 to actually go into pairing so i had no clue the mw600 even had a pairing mode! After some checking I found out i had to hold the power button for 5 seconds for it to go into pairing. After that my z2 picked it up fine and works just like before.
Thanks again to everyone that replied!
asura000 said:
Hi all,
Thanks for the input! I managed to solve it. My samsung s3 never needed the mw600 to actually go into pairing so i had no clue the mw600 even had a pairing mode! After some checking I found out i had to hold the power button for 5 seconds for it to go into pairing. After that my z2 picked it up fine and works just like before.
Thanks again to everyone that replied!
Click to expand...
Click to collapse
All bt devices need to go in pairing mode before they can be discovered. For your S3, I am guessing it is the first phone you paired with the headset brand new? Cause most devices will go straight into the pairing mode when turned on for the first time, hence that's why you didn't know or need to activate it.
had pairing issues too, was not able to pair some devices, but after disabling NFC i had no problems.