Related
I was on S-off leaked RUU ICS running fine, I downloaded the latest speed rom and it gave me this error while trying to flash
Formatting partitions
(system is unmounted already)
E: Error in /sdcard/Speed Rom ICS 3.1.0.zip
(Status 1)
Installation aborted.
I downloaded it again and got the same error.
When i tried a third time i was no longer able to get into CWM.
I tried flashing CWM again using the all in one tool which pushed it fine but it still does not load CWM, I tried pushing 4ext and TWRP with the same results. 4ext was able to get to a screen where it said 4ext is loading 3..2..1.. but then back to the white HTC screen
is there a way i can push the RUU leak file via ADB so i can flash that again using the built in recovery?
Thanks,
kewlmonk2121 said:
I was on S-off leaked RUU ICS running fine, I downloaded the latest speed rom and it gave me this error while trying to flash
Formatting partitions
(system is unmounted already)
E: Error in /sdcard/Speed Rom ICS 3.1.0.zip
(Status 1)
Installation aborted.
I downloaded it again and got the same error.
When i tried a third time i was no longer able to get into CWM.
I tried flashing CWM again using the all in one tool which pushed it fine but it still does not load CWM, I tried pushing 4ext and TWRP with the same results. 4ext was able to get to a screen where it said 4ext is loading 3..2..1.. but then back to the white HTC screen
is there a way i can push the RUU leak file via ADB so i can flash that again using the built in recovery?
Thanks,
Click to expand...
Click to collapse
Download the ICS leak again, rename it to PH85IMG.zip, put it on your microSD card, boot into bootloader (vol down + power), let it do its thing
Also, may I recommend the 4ext recovery?
kered424 said:
Download the ICS leak again, rename it to PH85IMG.zip, put it on your microSD card, boot into bootloader (vol down + power), let it do its thing
Also, may I recommend the 4ext recovery?
Click to expand...
Click to collapse
Is there a way i can push it through adb?
i tried >adb push PH85IMG.zip /sdcard
but it gave me "failed to copy 'PH85IMG.zip' to '/sdcard': Is a directory"
I don't have a anything i can put my microSD in except my phone till tomorrow
kewlmonk2121 said:
Is there a way i can push it through adb?
i tried >adb push PH85IMG.zip /sdcard
but it gave me "failed to copy 'PH85IMG.zip' to '/sdcard': Is a directory"
I don't have a anything i can put my microSD in except my phone till tomorrow
Click to expand...
Click to collapse
I have no idea. Sorry.
The command should be...(put the PH85IMG.zip in your tools folder first)
Code:
adb push PH85IMG.zip /sdcard2/PH85IMG.zip
If sdcard2 doesn't work try sdext or sd_ext
Don't quote me on this...
Double0EK said:
The command should be...(put the PH85IMG.zip in your tools folder first)
Code:
adb push PH85IMG.zip /sdcard2/PH85IMG.zip
If sdcard2 doesn't work try sdext or sd_ext
Don't quote me on this...
Click to expand...
Click to collapse
I tried that way too later on. It gave me permission denied. I think because my rom was gone debugging was no longer enabled and write permissions to the SD card were gone. I was able to get back up and running by using a card reader.
Thanks everyone
kewlmonk2121 said:
I was on S-off leaked RUU ICS running fine, I downloaded the latest speed rom and it gave me this error while trying to flash
Formatting partitions
(system is unmounted already)
E: Error in /sdcard/Speed Rom ICS 3.1.0.zip
(Status 1)
Installation aborted.
I downloaded it again and got the same error.
When i tried a third time i was no longer able to get into CWM.
I tried flashing CWM again using the all in one tool which pushed it fine but it still does not load CWM, I tried pushing 4ext and TWRP with the same results. 4ext was able to get to a screen where it said 4ext is loading 3..2..1.. but then back to the white HTC screen
is there a way i can push the RUU leak file via ADB so i can flash that again using the built in recovery?
Thanks,
Click to expand...
Click to collapse
I wish I read this earlier...exact same thing happened to me! I'm s-on however , but just unlocked my boot loader to flash this rom.
Now I have to re-lock bootloader and load the stock rom again...so much work for literally no benefit. Disappointed!
amad99 said:
I wish I read this earlier...exact same thing happened to me! I'm s-on however , but just unlocked my boot loader to flash this rom.
Now I have to re-lock bootloader and load the stock rom again...so much work for literally no benefit. Disappointed!
Click to expand...
Click to collapse
Nobody made you flash it you know...just saying
Sent from my HTC_Amaze_4G using XDA
Spastic909 said:
Nobody made you flash it you know...just saying
Sent from my HTC_Amaze_4G using XDA
Click to expand...
Click to collapse
Thanks for stating the obvious
Ok, I was trying to flash the newest ICS leak and being the newb I am, its borked.
Right now I have an unlocked bootloader with H-Boot 2.11.0000
I have a blank SD card and I just need to know what files to copy to it and what steps to get back to stock or possibly getting the 5/8 ROM leak installed
I'm assuming your s-on still, follow the directions in the OP to install.
Installation for S-ON Devices on Gingerbread firmware
* Copy ROM to SD Card AND PH98IMG.zip AND GB Firmware Patch to ROOT of SD Card
* Reboot to recovery
* wipe data / Factory Reset
* Flash ROM
* Flash GB Fimrware Patch
* Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
* Reboot
* Profit!
How exactly do you FLASH the rom without renaming it?
mjones73 said:
I'm assuming your s-on still, follow the directions in the OP to install.
Installation for S-ON Devices on Gingerbread firmware
* Copy ROM to SD Card AND PH98IMG.zip AND GB Firmware Patch to ROOT of SD Card
* Reboot to recovery
* wipe data / Factory Reset
* Flash ROM
* Flash GB Fimrware Patch
* Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
* Reboot
* Profit!
Click to expand...
Click to collapse
I can't get past the bolded parts... How do you flash with those files on the SD card, everytime I return to the bootloaded it just runs the PH98IMG file and updates.... from there I'm stumped.
Jonger1150 said:
I can't get past the bolded parts... How do you flash with those files on the SD card, everytime I return to the bootloaded it just runs the PH98IMG file and updates.... from there I'm stumped.
Click to expand...
Click to collapse
Take out your sd card, then go to recovery, wipe. Pop your battery out put your sd card back in, then continue.
Jonger1150 said:
I can't get past the bolded parts... How do you flash with those files on the SD card, everytime I return to the bootloaded it just runs the PH98IMG file and updates.... from there I'm stumped.
Click to expand...
Click to collapse
1) Easiest thing for you is to turn USB Debugging on in Settings (Apps > Development), hook up to PC, and use the Hasoon2000 Noob-proof toolkit to reboot directly to recovery: http://forum.xda-developers.com/showthread.php?p=22696442
2)Many Custom ROMs have Reboot to Recovery in the power button menu
3)Ninja grab the battery at an angle and slide SD Card out, go to recovery, and slide in while mainitaining power connection. (Not ah, recommended but good in a bind)
skater95 said:
Take out your sd card, then go to recovery, wipe. Pop your battery out put your sd card back in, then continue.
Click to expand...
Click to collapse
When my options are
FASTBOOT
RECOVERY
FACT Reset
Clear Storage
SIMLOCK
IMAGE CRC
Which one flashes the rom?
Jonger1150 said:
When my options are
FASTBOOT
RECOVERY
FACT Reset
Clear Storage
SIMLOCK
IMAGE CRC
Which one flashes the rom?
Click to expand...
Click to collapse
You need to first flash a custom recovery and then select that option (AmonRa 3.15 recommended, CWM is buggy on charging battery). That Hasoon2000 kit in last post can do that for you too if you don't have AmonRa installed.
PhantasmRezound said:
You need to first flash a custom recovery and then select that option (AmonRa 3.15 recommended, CWM is buggy on charging battery). That Hasoon2000 kit in last post can do that for you too if you don't have AmonRa installed.
Click to expand...
Click to collapse
That seems to be the biggest issue, can I flash a recovery without being able to boot my phone up... I only have access to the bootloader.
All the instructions fail to mention the requirement for the recovery app... That was the newb boo-boo.
I think there is a zip somewhere, but it's easier with adb.
fastboot flash recovery (name of recovery).img
I recommend S-Off. It makes all of this super easy. I promise its really not that hard. The wire trick looks worse than it is.
Edit: fixed. I'm retarded in the morning.
Sent from my ADR6425LVW using Tapatalk 2
Jonger1150 said:
That seems to be the biggest issue, can I flash a recovery without being able to boot my phone up... I only have access to the bootloader.
All the instructions fail to mention the requirement for the recovery app... That was the newb boo-boo.
Click to expand...
Click to collapse
Yeah, manually you can flash a custom recovery via the same method, a PH98IMG.zip from bootloader. You delete the existing PH98IMG file and replace with one containing AmonRa (what exactly is that zip, do you need it still?)
But, adb fastboot commands when hooked up to PC can flash the recovery directly to memory from an img file. Just need USB Debugging turned on in the Settings on a regular boot to the ROM.
Sooo just use the toolkit on a PC to eliminate hassle if ya can lol. It uses that second paragraph's method. Just need to click an option and it runs the script. Now ya know both ways.
Oh, link in earlier post from my XDA app is not working :/ here is the thread http://forum.xda-developers.com/showthread.php?p=22696442
I guess until I find the zip and instructions I have a brick.
PhantasmRezound said:
Yeah, manually you can flash a custom recovery via the same method, a PH98IMG.zip from bootloader. You delete the existing PH98IMG file and replace with one containing AmonRa (what exactly is that zip, do you need it still?)
But, adb fastboot commands when hooked up to PC can flash the recovery directly to memory from an img file. Just need USB Debugging turned on in the Settings on a regular boot to the ROM.
Sooo just use the toolkit on a PC to eliminate hassle if ya can lol. It uses that second paragraph's method. Just need to click an option and it runs the script. Now ya know both ways.
Oh, link in earlier post from my XDA app is not working :/ here is the thread http://forum.xda-developers.com/showthread.php?p=22696442
Click to expand...
Click to collapse
USB debugging in my PC? I can't access Android OS. I'm 100% limited to the bootloader with NO recovery tool.
OK!!
Got Clockwork installed!
Jonger1150 said:
USB debugging in my PC? I can't access Android OS. I'm 100% limited to the bootloader with NO recovery tool.
Click to expand...
Click to collapse
Ah, I meant the ROM, but not even the ROM boots because of bad flash. No worries. Don't need to be in the ROM anyway, toolkit works in the bootloader.
1) Ensure drivers for phone are properly installed on PC. (Google and download HTC Sync if unsure.)
2) Download and extract toolkit. Run the All In One exe file. The GUI comes up with your options.
3) With phone off, remove SD Card.
4) Boot into bootloader. Select Fastboot option.
5) Connect to PC via USB.
6) Select AmonRa from toolkit options and install.
7) Power down phone, disconnect and insert SD Card.
8) Connect phone, power it up and select Reboot to Recovery on the toolkit.
From recovery, you can enable USB mass storage option for memory and download/transfer files you need from your PC, delete the PH98IMG.zip, etc.
Jonger1150 said:
OK!!
Got Clockwork installed!
Click to expand...
Click to collapse
Ah good Still please be careful though:
PhantasmRezound said:
You need to first flash a custom recovery and then select that option (AmonRa 3.15 recommended, CWM is buggy on charging battery). That Hasoon2000 kit in last post can do that for you too if you don't have AmonRa installed.
Click to expand...
Click to collapse
Several user reports in the forum say ClockworkMod (CWM) has an issue with charging our batteries when the drain gets low. Risk not being able to charge phone at all and brick that way. AmonRa or TWRP from the Development section are still recommended for this particular phone for now.
Hope you get sorted out on the ROM
Sounds like you're getting instructions to do more than you asked.
Go to post three on the following page and scroll down to "Latest leak and installation instructions".
Make sure it flashes twice. I just did this procedure this afternoon without any trouble.
http://forum.xda-developers.com/showthread.php?t=1508118
I got the ROM up and running.... Updating my backup settings... Next step will be to replace clockwork and flash a recovery image... Gotta figure that all out now.
Is it possible to flash AMON recovery over CWM?
Jonger1150 said:
I got the ROM up and running.... Updating my backup settings... Next step will be to replace clockwork and flash a recovery image... Gotta figure that all out now.
Is it possible to flash AMON recovery over CWM?
Click to expand...
Click to collapse
Yes, just install the new recovery normally, will be okay.
I guess I did end up installing AMON recovery, I just checked. Creating Nandroid right now....
Does a Nandroid basically recover EVERYTHING?
I was flashing Viper ROM and something must have failed because now i boot straight in to the boot loader screen. Recovery of my backups just boot back to the boot loader screen after it completes and i reboot. What steps should I take to restore my system?
Maybe an ruu, if you can't get the nandroids to restore maybe a partition got messed up. This is a new one for me
Did u try flashing a different rom also? Maybe ur ad card got corrupt and ur nandroids and rom are corrupt.
What recovery u on? Are you soff?
Could be missing kernel, I heard a rumor that there is a s-on flashable zip for the kernel, awesomesauce I think uses it. Not sure though if ur s-on that might be a good option.
Fasboot flash the kernel
Open Rom zip and extract boot.img, place it in adb or SDK folder and connect phone, open command window in folder (shift+right click, open command window here) type fastboot flash boot boot.img
detcup4evr said:
Maybe an ruu, if you can't get the nandroids to restore maybe a partition got messed up. This is a new one for me
Did u try flashing a different rom also? Maybe ur ad card got corrupt and ur nandroids and rom are corrupt.
What recovery u on? Are you soff?
Click to expand...
Click to collapse
Just tried a new rom via SD card in twarp. Im S-on with twrp 2.2.1 I am also noticing twrp will not mount my internal storage
Most likely corrupt, just mount to pc through twrp, windows will prompt you to reformat
om4 said:
Most likely corrupt, just mount to pc through twrp, windows will prompt you to reformat
Click to expand...
Click to collapse
thanks that fixed the mounting of the internal storage. Im trying the fastboot now
Fast boot fixed the problem thanks again
fairly new to rooting, so sorry if the fix is simple (hoping it is). i have a evo 4g lte, rooted it, been having issues flashing cm10, so i would reflash a previously saved working rom, no problems. i have been using twrp for recovery. so i switched to cwmr (HUGE MISTAKE)to try and see if that would somehow fix why everytime i was flashing cm10 my phone would never load past the loading screen ( android in middle of revolving circle). basically my problem is, in recovery i cant mount ext-sd or the internal sd, i can "see" my saved backups, but cant flash them, when i try it says" no files found" i played with things for a while, somehow got some old downloaded cm10 version to work, so i atleast have a working phone, but cant mount my sdcard under storage which i need done to flash twrp back into my phone. ive been reading on how to use termianl emulator to mount sd card, but cant figuer that out, any help would be muchly appreciated, sorry for long description of my issue, i just want to be able to flash twrp, reboot into recovery and restore back to a previously working rom!!! PLEASE HELP!!!!!!!!
also... cm update is constantly running, cant stop it, my pc doesnt recognize my phone, cant mount in recovery or in settings. tried copy and pasting the saved zip files using a root browser app to relocate them and trying to reboot into recovery and flashing them, that does work... please help!!!!
If you can get into terminal emulator, then just flash twrp using that. The directions are on their website.
toolmod francis,
{ParanoiA} said:
If you can get into terminal emulator, then just flash twrp using that. The directions are on their website.
Click to expand...
Click to collapse
too late, i kept playing around with everything in recovery mode, and apprently made things worse, now the phone will recognize my ext sd and not the internal sd, which is what u need to use terminal emulator to reflash twrp, any other suggestions???
You can update recovery image through fastboot or place the twrp update zip (rename PJ75IMG.zip) on external and boot to bootloader. As for internal being corrupt, boot into twrp and mount as USB storage and format through pc
om4 said:
You can update recovery image through fastboot or place the twrp update zip (rename PJ75IMG.zip) on external and boot to bootloader. As for internal being corrupt, boot into twrp and mount as USB storage and format through pc
Click to expand...
Click to collapse
can u give me the detailed instructions on how to do that please
om4 said:
You can update recovery image through fastboot or place the twrp update zip (rename PJ75IMG.zip) on external and boot to bootloader. As for internal being corrupt, boot into twrp and mount as USB storage and format through pc
Click to expand...
Click to collapse
when trying to upload pj75img.zip in recovery from ext sd it says install aborted, it wont take, how do u update recovery image in fastboot
update... cant flash anything, lol. cant access the vfolk folder or whatever under system/etc... to try and make my ext sd my primary source of memory, cant flash twrp in terminal emulator, cant flash anything while in recovery with clockworkmod, cant flash twrp thru goomanager or any other app, cant mount internal sd while in recovery, ANY SUGGESSTIONS people, ive spent literally all weekend researching and still nothing, if someone could call me and walk me thru **** thatd help alot, hell... im to the point to where id mail my phone to someone to let them fix it, haha, please help!!!!!!!
run the ruu and start over again
i had sd card reading issues couple months ago and the ruu fixed it
Miahjera04 said:
when trying to upload pj75img.zip in recovery from ext sd it says install aborted, it wont take, how do u update recovery image in fastboot
Click to expand...
Click to collapse
ADB Tools Mini SDK
Extract this and then open the folder and hold shift+select and right click. In the menu select open command window here. Put your phone in fastboot and connect to pc. Type fastboot devices to make sure its connected. Then type fastboot flash recovery "filename.img" filename being what ever the name of the recovery file is. It should write recovery and then you can boot into twrp
flex360 said:
run the ruu and start over again
i had sd card reading issues couple months ago and the ruu fixed it
Click to expand...
Click to collapse
to run ruu, dont u have to be able to connect to pc? when i do, the pc doesnt recognize, since the internal sd isnt mounted, i cant "mount" my phone to the pc....
Boot to fastboot and run ruu
om4 said:
Boot to fastboot and run ruu
Click to expand...
Click to collapse
so that's plugged into PC to do that right, shouldn't the phone say fastboot usb or something
Boot to bootloader and select fastboot, when you connect to the pc it should say fastboot usb
om4 said:
Boot to bootloader and select fastboot, when you connect to the pc it should say fastboot usb
Click to expand...
Click to collapse
while in fastboot i cant get it to say fastboot usb sometimes, but when i run ruu, it says it cant detect my phone, so no luck there... it says usb connection error: 170
om4 said:
ADB Tools Mini SDK
Extract this and then open the folder and hold shift+select and right click. In the menu select open command window here. Put your phone in fastboot and connect to pc. Type fastboot devices to make sure its connected. Then type fastboot flash recovery "filename.img" filename being what ever the name of the recovery file is. It should write recovery and then you can boot into twrp
Click to expand...
Click to collapse
after unziping the folder and trying to run that program i get system error saying its missing a .dll file
You probably need to reinstall HTC drivers
om4 said:
Boot to fastboot and run ruu
Click to expand...
Click to collapse
ok, i atleast got ruu to take, then phoen reboots the bootloader, erases user data, then just stays on sending for about 30-45 secs, then the program stops and says unknown error and to find rom compatible with phone, im using ruu 2.13 which looks to be the newest one... : (
om4 said:
You probably need to reinstall HTC drivers
Click to expand...
Click to collapse
i reinstalled 1000 times. lol.... im currently working on getting adb prompt to work, downloaded the neccesary java stuff, but cant get the prompt to open, been reading about having to relocate java files, and stuff, but havin dificulty... hoping that if i can get into an emulator on the pc i can force flash twrp or something, anyone know how to help with that?
FINALLY FIXED!!!!!! had to relock bootloader for the ruu to take, smh... such an easy thing to over look, but got back to factory rom.. bot to root again, lol... BIG LESSON LEARNED, thanks for all help
i downloaded [ROM][11.18.2012] Newts OnE XxX RLS 6.0.2 *Global*[Sense 4.1], pulled the boot.img out of the zip and put it in my folder with fastboot, put them on my sd card (although i may not have put the boot.img on my phone), flashed cleanwipe.zip (or w/e it's called), flashed rom, tried to flash boot.img from my computer but after putting in the fastboot flash boot boot.img command it just sat there saying "waiting for device." i couldn't get back to the bootloader from clockword mod recovery so i pulled/replaced the battery and power+vol down, bootloader came up but before i could do anything i get this:
HBOOT
Parsing...(SD ZIP)
[1] BOOT
Do you want to start update?
<vol up> yes
<vol down> no
if i go up it says it updates, and even if i decline it doesn't go back to bootloader, it just tells me to hit power to resart the phone. so i restart, and get stuck in a bootloop of the new mikroms loading animation. i can't seem to get to the bootloader to load recovery. i'm not sure what i did wrong, and i hope someone can please help?
You have something on your SD Card that the bootloader is trying to load, you're gonna need to put the SD Card in a reader and delete it first or boot the phone up with the SD Card out so you can at least fastboot the kernel in.
mjones73 said:
You have something on your SD Card that the bootloader is trying to load, you're gonna need to put the SD Card in a reader and delete it first or boot the phone up with the SD Card out so you can at least fastboot the kernel in.
Click to expand...
Click to collapse
i'm not sure how to do that. i thought i knew how to use fastboot from my computer but i can't even remember where i learned how to do it. but you were right, i pulled out the sd card and it went to bootloader. i just don't know what to do from here, i guess i need a ph98img.zip to put on my internal storage?
1.You need to delete the zip on the external SD card.
2.Wipe your phone(like you normally would when flashing a rom )
3.flash the ROM
4.flash s-on stock zip
5.flash the flashable boot image zip you can use to flash the boot.IMG for the ROM.
Head over to the mikmik you can find everything you need their under newts section.
Sent from my Rezound using xda app-developers app
se5s said:
i'm not sure how to do that. i thought i knew how to use fastboot from my computer but i can't even remember where i learned how to do it. but you were right, i pulled out the sd card and it went to bootloader. i just don't know what to do from here, i guess i need a ph98img.zip to put on my internal storage?
Click to expand...
Click to collapse
Put the boot.img on your PC, boot to bootloader/fastboot, run in the command prompt - "fastboot flash boot boot.img" without the quotes. If boot.img is not in the same folder as fastboot.exe, add to path to it, ex. fastboot flash boot c:\path\to\boot.img.