Was running NRG GB just fine. When giving the phone to the wife I decided to upgrade to ICS. Used CWM to wipe data, cache, etc, and installed, got freeze on HTC logo. Started using Superwipe before each try and also tried flashing several different kernels including the one inside the zip and the one included with the amaze stock kernel flasher. Now the best I can get is 5 seconds into the Energy spinning rings logo before a 5s freeze and reboot.
The only thing I haven't tried is firmware; I've seen references to "find it on the forums" but copious forum and google searches don't seem to lead to the ICS firmware itself. Can anyone help with that or point out what I'm forgetting?
In the meantime I will try installing the ICS stock ROM first and see where that gets me.
ten6 said:
Was running NRG GB just fine. When giving the phone to the wife I decided to upgrade to ICS. Used CWM to wipe data, cache, etc, and installed, got freeze on HTC logo. Started using Superwipe before each try and also tried flashing several different kernels including the one inside the zip and the one included with the amaze stock kernel flasher. Now the best I can get is 5 seconds into the Energy spinning rings logo before a 5s freeze and reboot.
The only thing I haven't tried is firmware; I've seen references to "find it on the forums" but copious forum and google searches don't seem to lead to the ICS firmware itself. Can anyone help with that or point out what I'm forgetting?
In the meantime I will try installing the ICS stock ROM first and see where that gets me.
Click to expand...
Click to collapse
Do just that, remember to lock your bootloader if you're s-on and yes, jumping to an ICS rom without updating your device caused the bootloop.
Dark Nightmare said:
Do just that, remember to lock your bootloader if you're s-on and yes, jumping to an ICS rom without updating your device caused the bootloop.
Click to expand...
Click to collapse
Thanks for the reply! I'm downloading PH85IMG_RUBY_ICS_35_S_TMOUS_2.14.531.3_Radio_1.14.550L.17DC_30.78.550L.15_release_259626_signed.zip from filefactory, it's taking forever. Am I flashing this with CWM? Or should I be downloading a GB factory ROM and using that instead, then re-locking the bootloader and trying to update over the air?
ten6 said:
Thanks for the reply! I'm downloading PH85IMG_RUBY_ICS_35_S_TMOUS_2.14.531.3_Radio_1.14.550L.17DC_30.78.550L.15_release_259626_signed.zip from filefactory, it's taking forever. Am I flashing this with CWM? Or should I be downloading a GB factory ROM and using that instead, then re-locking the bootloader and trying to update over the air?
Click to expand...
Click to collapse
Don't download that one, it has issues, hold up, I'll give you a link to the most recent file.
Here, get this: http://d-h.st/3VD
Download speed should be faster as well. rename it PH85IMG and place it on your sd card after you relock your bootloader, then boot into bootloader, it's gonna detect the file and ask you if you wanna update, follow the on screen instructions to update, voila! Follow the basics to install the new energy rom.
It's almost as tho NO One reads anymore. It's actually getting kinda ridiculous how many times the same issue is gonna be asked.
I know this post isn't very helpful but I'm sure most of the recognized/senior/not noobs members are getting frustrated.
~~~~~~~~~~~~~~~~~~~~~~~~
It's Better To Fail At Originality
Than To Succeed In Imitation.
-Mighty Healthy
Click to expand...
Click to collapse
Double0EK said:
It's almost as tho NO One reads anymore. It's actually getting kinda ridiculous how many times the same issue is gonna be asked.
I know this post isn't very helpful but I'm sure most of the recognized/senior/not noobs members are getting frustrated.
~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
It is useful, I fully agree with you, it's like we come here to answer the same questions over and over, but I'm just trying to be nice, cause I usually just say, read the amaze bible, but then they go and do something even more noobish, so to avoid the tear jerks I just give the basic info, though I'm fading away slowly.
Thanks'd for the link and the help. I was gonna get mad about being called a noob who can't read, but I guess it's a small price to pay for instant, free help. Keep on rockin' XDA.
I came across this issue. As earlier posts said, install the new ICS update. The partitions were messed up and the ruu will clean it up.
ten6 said:
Thanks'd for the link and the help. I was gonna get mad about being called a noob who can't read, but I guess it's a small price to pay for instant, free help. Keep on rockin' XDA.
Click to expand...
Click to collapse
Lol, never pointed fingers buddy, so calm down.
Maybe I should create a new topic but my issue is similar to this one except for the fact that I read quite a lot and tried quite a few things.
My situation is that I made a backup with cwm only booted not flashed so I have the 100% stock backed up, after this I flashed cwm and tried to install the Energy rom based on ics and that was my mistake as I used to be on a Nexus device I didn't have to worry about this.
So I got stuck on a bootloop and tried factory reset/wiping everything, tried to reinstall a stock ROM (t-mobile one as I only found a .exe for the videotron one and I did not feel like exploring the exe as I am a Linux user) by relocking bootloader and using the HTC method, tried to install manually the stock Kernel with Energy ROM using adb and fastboot commands, tried to restore my backup but nothing seems to work, I'm still bootlooping.
Is-it possible to s-off without a regular adb access (only the cwm adb access)? And would s-off allow me to flash anything as I wish? Is there a way to have any ROM working on my device? (i know the answer is yes to the last one, at least )
Thanks!
Edited: I don't know why I even replied to the post above this.
Read more you'll find out what you're doing wrong.
~~~~~~~~~~~~~~~~~~~~~~~~
It's Better To Fail At Originality
Than To Succeed In Imitation.
-Mighty Healthy
Click to expand...
Click to collapse
Double0EK said:
Edited: I don't know why I even replied to the post above this.
Read more you'll find out what you're doing wrong.
~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
Maybe I'm a noob on this forum but it's far to be the first time I face a problem in software configuration/installation and I read quite enough (spent about five hours on xda, google, etc.) to say that you should at least help me a bit by linking me to a thread where I can find an answer.
I know my mistake was to install ics at first but now I flashed the stock recovery back, I relocked the bootloader via fastboot and put the file on the root of my sdcard renamed correctly that it be detected automaticly (and it apparently does install) but I still got the * bootloop.
I'm able to read a manual and to read the Amaze 4G bible four times to try to point out the detail I forgot. I made my homework and now it would only be nice from you that you help me a bit...
johnride said:
Maybe I'm a noob on this forum but it's far to be the first time I face a problem in software configuration/installation and I read quite enough (spent about five hours on xda, google, etc.) to say that you should at least help me a bit by linking me to a thread where I can find an answer.
I know my mistake was to install ics at first but now I flashed the stock recovery back, I relocked the bootloader via fastboot and put the file on the root of my sdcard renamed correctly that it be detected automaticly (and it apparently does install) but I still got the * bootloop.
I'm able to read a manual and to read the Amaze 4G bible four times to try to point out the detail I forgot. I made my homework and now it would only be nice from you that you help me a bit...
Click to expand...
Click to collapse
Okay okay, calm down, there's currently only one method of going about restoring your device since you're s-on and no you cannot s-off with just cwm adb, I think JB s-off method is only an exe file, never saw linux files anywhere on his site. Anyways, you have to use the GB exe for videotron and restore to stock via it then update to ics to use the most recent energy rom, BUT if you just want a working device, this is just an idea, though it should work fine, you can flash a custom recovery and flash the GB version of energy rom, you should be able to restore your backup as well, but you said you can't, which is odd, it may be because of the kernel not being flashable as since CWM cannot flash kernels while s-on, in which case I'd advise you to get 4EXT recovery and then try restoring your back once again, it should work fine since 4EXT can flash kernels while S-ON.
My two cents.
Well, 4ext doesn't works, apparently it flashes correctly but I can't boot in it so can't even try to restore my backup, s-off doesn't works from cwm and my device has to be booted to work with Videotron's exe (or I badly installed my drivers, I nerver understand properly the 899363 drivers per device I have to install for an android phone on Windows?)
Smells bad... I checked the 4ext's md5sum and it's alright, I took it from the fastboot installable img in direct dl from the thread in the Amaze bible.
Any idea?
Oh and there is a JB s-off executable for Linux on his site. After all I guess it is mostly adb commands?
johnride said:
Well, 4ext doesn't works, apparently it flashes correctly but I can't boot in it so can't even try to restore my backup, s-off doesn't works from cwm and my device has to be booted to work with Videotron's exe (or I badly installed my drivers, I nerver understand properly the 899363 drivers per device I have to install for an android phone on Windows?)
Smells bad... I checked the 4ext's md5sum and it's alright, I took it from the fastboot installable img in direct dl from the thread in the Amaze bible.
Any idea?
Oh and there is a JB s-off executable for Linux on his site. After all I guess it is mostly adb commands?
Click to expand...
Click to collapse
I got lost halfway through that post, after flashing a rom, if the kernel isn't flashed (reboots and does it automatically), then flash the kernel manually, should boot fine, does anyone ever really read anymore? This very issue both s-on and s-off has been answered more times today than I can count. If you read the details on JB's site, you'd see and know all you need to.
Right, I'va already flashed manually the stock kernel as sais in the NRGRom thread without success before my first post here, will look at different kernels.
johnride said:
Right, I'va already flashed manually the stock kernel as sais in the NRGRom thread without success before my first post here, will look at different kernels.
Click to expand...
Click to collapse
How did you go about flashing the kernel?
Sent from my SGH-T679 using xda app-developers app
There was a flash.sh file in the zip with the kernel, I couldn't run it normally as I can't boot but I went in cwm (maybe I should have used 4ext, don't think so for this part) executed the adb commands there were in the sh file with all filesystems mounted, rebooted into fastboot and flashed the kernel image. Maybe there are differents /system when in cwm and when booted on regular system... Will figure that out when I have time to spend on this, as soon as possible.
Thanks for all the cues!
Sent from my Nexus S
johnride said:
There was a flash.sh file in the zip with the kernel, I couldn't run it normally as I can't boot but I went in cwm (maybe I should have used 4ext, don't think so for this part) executed the adb commands there were in the sh file with all filesystems mounted, rebooted into fastboot and flashed the kernel image. Maybe there are differents /system when in cwm and when booted on regular system... Will figure that out when I have time to spend on this, as soon as possible.
Thanks for all the cues!
Sent from my Nexus S
Click to expand...
Click to collapse
Okay here's a few tips, cwm cannot flash kernels with son devices, get 4ext recovery for that. Second thing, reflash the from after doing a super wipe, if 4ext doesnt reboot and flash the kernel, do it manually, ill assume you know how to use ad, if not check my Bible tutorial on it, use the boot command for flashing boot images, take the boot file from the zip file, place it in the folder where your adb files are and flash it to your device while its in fastboot mode.
Sent from my SGH-T679 using xda app-developers app
Well, I think I have done all you mention above, the only thing i'm not sure to understand is what you mean by "super wipe" I found some executables about it but I guess it can't do much more than the flash all partitions (except external sdcard) in 4ext recovery wich I finally managed to install properly.
So, I made that global formatting thing, I tried to install an ICS based ROM and 4ext rebooted to install kernel, same bootloop. Tried to install manually the kernel that came with this rom via the classic fastboot flash boot boot.img. Same bootloop. Tried to put the modules manually via the recovery adb access (performing a mount -a in adb shell to have everything present in fstab mounted) and flashing this stock kernel with no more success.
Achieved the same operations with a GB based ROM (this one: http://forum.xda-developers.com/showthread.php?t=1535173) with both the faux and the stock kernel without any more success.
Did I miss something? Am I so dumb? Do you have any other rom to suggest that have higher chances to succeed?
Do you think trying to restore my sotck nandroid with 4ext has more chances to succeed?
Thanks, again and always!
Related
I did my research on how to install ROMS with a locked S On and Kernels, but just got even more confused about the process. I am coming from an Evo 4g CDMA.
I have H BOOT 1.5 unlocked S ON. My back up was lost. I tried to flash something like the newest MIUI using TWRP 1.1. w/e. I can't get past the boot screen for MIUI. As I was reading up on the forums, it seemed to me that you had to use a program called Flash Image GUI to get a kernel going on a ROM. Though, here is where I was confused. If a ROM has a kernel in it and I flash the ROM, does the Kernel part of that flash not get set up as well?
Would I need to flash the rom like normal from the SD Card then use something separate to flash a Kernel? If so, I am kinda boned. I can't get into the phone, just the recovery and can't get that program installed on the phone Trying to flash up Xplode now to see if maybe I just got a bad download.
If these questions were answered, please forgive me, I did try to find the answers, but as I read up more and more, it was getting to be more and more confusing to my personal issue at hand.
Thanks for the help!!
If you grab the kernel from your Miui zip, it's in the zips root called boot.img
Put that into your folder with your fastboot exe
Boot into bootloader the same as when you flashed the CWM
Use fastboot command... fastboot flash boot boot.img
this will flash the kernel and you should be able to boot up properly
Oh, well that is the problem. I had someone else flash TWRP for me. Guess I need to find out more on how to flash up that to get the kernel going. This S On thing is a massive PITA, lol. Guess once I get the phone up and going and I can use that program, things will be way easier
Nametaken said:
Oh, well that is the problem. I had someone else flash TWRP for me. Guess I need to find out more on how to flash up that to get the kernel going. This S On thing is a massive PITA, lol. Guess once I get the phone up and going and I can use that program, things will be way easier
Click to expand...
Click to collapse
I see. i skipped the how to part since i thought you had alrady flashed the CMW your self, it's fairly easy.
you need..
1) to install the evo 3d usb drivers.. filename HTCDriver3.0.0.007.exe .sorry i don't have a link, i got them off these forums somewhere
2) you need the fastboot.exe , again search google/these forums
then shut down your phone
pull battery out, then back in
hold down volume- (minus) and then hold the power button as well, only let go once in the bootloader, choose the fastboot option then insert usb cable to phone->pc .. you should see fastboot-usb message come up on your phone
then you can type out that fastboot command in the previous post from a dos command prompt, from the directory with your fastboot exe and boot.img
It's easier to put rom you want on the SD card make sure debug is on.
Adb reboot bootloader . Now
Fastboot boot recovery.img now wipe and flash rom you are good to go man. Works flawless .
Sent from the Reaper.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Sorry about posting in the wrong area.
What I did, which can help out other 3D noobs is this:
Since I just unlocked and have no back up, my kernel was still stock
Downloading a stock rom and moving it to my phone via comp, twrp recovery mode>> USB Toggle allows you to connect to PC! Put the rom on the main part of the SD card and just flash like normal.
Here you should be able to boot up like normal again.
Let me say, Flash Image GUI is a noobs friend till you can learn to use adb more.
I was told you can put a Rom on your card and just flash allowing the kernel to flash as well. I have not had success with this with HBoot 1.5 S On.
Flash Image GUI:
Download the rom you want, Aosp to Sense is fine.
Open Flash GUI and choose the Browse option.
Locate your rom on your card and choose it.
The app will give you a message saying the rom is big yada yada, say yes.
Wait a few moments as it finds the kernel. Once it does, choose flash Image.
Choose reboot recovery and flash the exact rom you picked with the App. Reboot and win.
This is just what I, a noob, have found to work.
I have NOT been able to just flash any rom on the SD Card and have it work. Flash Image UI has NOT been able to get Virus' Rom to load
A's I find more noob friendly tips I can report.
Thanks everyone else for the input! I won't lie, I came from an Evo 4g and am totally lazy as I am used to S Off and just flashing away. S On, I hate you. ADB, I fear you. Flash Image GUI, I want to marry you!
CDMA 3D, I wish we had more AOSP lol
Hope this helps out some people.
Sent from my PG86100 using XDA
Nametaken said:
Sorry about posting in the wrong area.
What I did, which can help out other 3D noobs is this:
Since I just unlocked and have no back up, my kernel was still stock
Downloading a stock rom and moving it to my phone via comp, twrp recovery mode>> USB Toggle allows you to connect to PC! Put the rom on the main part of the SD card and just flash like normal.
Here you should be able to boot up like normal again.
Let me say, Flash Image GUI is a noobs friend till you can learn to use adb more.
I was told you can put a Rom on your card and just flash allowing the kernel to flash as well. I have not had success with this with HBoot 1.5 S On.
Flash Image GUI:
Download the rom you want, Aosp to Sense is fine.
Open Flash GUI and choose the Browse option.
Locate your rom on your card and choose it.
The app will give you a message saying the rom is big yada yada, say yes.
Wait a few moments as it finds the kernel. Once it does, choose flash Image.
Choose reboot recovery and flash the exact rom you picked with the App. Reboot and win.
This is just what I, a noob, have found to work.
I have NOT been able to just flash any rom on the SD Card and have it work. Flash Image UI has NOT been able to get Virus' Rom to load
A's I find more noob friendly tips I can report.
Thanks everyone else for the input! I won't lie, I came from an Evo 4g and am totally lazy as I am used to S Off and just flashing away. S On, I hate you. ADB, I fear you. Flash Image GUI, I want to marry you!
CDMA 3D, I wish we had more AOSP lol
Hope this helps out some people.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
ADB is pretty simple to flash with lol
All you do is keep a copy of the recovery.img you are using in your adb folder...
You hold shift down right click on the folder that adb is in platform tools folder is where it's at say open cmd prompt to it. That is the fast painless method
Make sure you have a rom on your sd card.... Also that debug is turned on...
Plug phone in hook to computer...
ADB:
adb reboot bootloader
now:
fastboot boot recovery.img takes you into recovery...
Now wipe don't wipe SD card...
Flash rom your set works on virus roms and any other rom 0 issues
Also Flash GUI works for everyone nothing wrong with it....
I just prefer Good Old Adb to do my work If you need any help feel free to ask man.. I'll do what I can to help ya out if you get stuck..
reaper24 said:
ADB is pretty simple to flash with lol
All you do is keep a copy of the recovery.img you are using in your adb folder...
You hold shift down right click on the folder that adb is in platform tools folder is where it's at say open cmd prompt to it. That is the fast painless method
Make sure you have a rom on your sd card.... Also that debug is turned on...
Plug phone in hook to computer...
ADB:
adb reboot bootloader
now:
fastboot boot recovery.img takes you into recovery...
Now wipe don't wipe SD card...
Flash rom your set works on virus roms and any other rom 0 issues
Also Flash GUI works for everyone nothing wrong with it....
I just prefer Good Old Adb to do my work If you need any help feel free to ask man.. I'll do what I can to help ya out if you get stuck..
Click to expand...
Click to collapse
You can not flash some ROMS through ADB/Fastboot with s-on, it just doesn't work no matter which way you go about it. Flashing a recovery is easy but that was not the OP's problem. The "noob" way that the OP suggested is the only way to get roms with custom boot.img in the zip to stick. I just installed CM9 and ADB/fastboot was of no use. Getting into recovery is easy but will not provide results unless you have used FlashImageGUI.apk first on a working ROM.
Nether CWM nor TWRP work to flash such ROM's with the right boot.img. You must use FlashImageGUI.apk!
StevetotheH said:
You can not flash some ROMS through ADB/Fastboot with s-on, it just doesn't work no matter which way you go about it. Flashing a recovery is easy but that was not the OP's problem. The "noob" way that the OP suggested is the only way to get roms with custom boot.img in the zip to stick. I just installed CM9 and ADB/fastboot was of no use. Getting into recovery is easy but will not provide results unless you have used FlashImageGUI.apk first on a working ROM.
Nether CWM nor TWRP work to flash such ROM's with the right boot.img. You must use FlashImageGUI.apk!
Click to expand...
Click to collapse
I never had any issues using cwm the older version 4.0 to flash any rom the fastboot method Anyway's older TWRP and Newest CWM had some issues with not wiping right to flashing funky...
I will help the OP out if he ever gets stuck
Yeah reaper your right! I think I came off like a ****, I am one, but didn't mean to come off sounding snide.
Sent from my HTC Evo 3D using XDA
StevetotheH said:
Yeah reaper your right! I think I came off like a ****, I am one, but didn't mean to come off sounding snide.
Sent from my HTC Evo 3D using XDA
Click to expand...
Click to collapse
It's all good man no worries Your cool
Sent from my PG86100 using xda premium
Dah da dat ta ta! (Swoops in with my 2 cents)
See the Guide/Flashing Notes in my signature for a walkthru for flashing roms, recoveries, etc. All up to date. Choose your method: fastboot & recovery or flashimage & recovery.
Note: TWRP 2.0 with Dumlock is a workaround to avoid using fastboot (pc). FlashImage is not a requirement, its also a workaround vs fastboot.
mpgrimm2 said:
Dah da dat ta ta! (Swoops in with my 2 cents)
See the Guide/Flashing Notes in my signature for a walkthru for flashing roms, recoveries, etc. All up to date. Choose your method: fastboot & recovery or flashimage & recovery.
Note: TWRP 2.0 with Dumlock is a workaround to avoid using fastboot (pc). FlashImage is not a requirement, its also a workaround vs fastboot.
Click to expand...
Click to collapse
Nice I was wondering when you was gonna pop in . LOL
Sent from my PG86100 using xda premium
Thanks erryone. I hope others were able to get some help here that are new to 3vo and flashing. I am so waiting for a nub proof s-off method.
Sent from my PG86100 using XDA
There is the HBOOT downgrade. I have ZERO linux experience whatsoever and thought the process was very easy. I know it says to 'brick' the phone, but it is honestly not that scary. I have done two of these already both being successful on the first attempt. The live cd by closeone actually takes care of almost everything, except for actually doing the brick. Trust me being on 1.40 s-off is much much nicer.
Hello all,
I had the CWM installed, and my phone died when I was asleep, down to 0%.
Now, it won't charge. I got a half charged battery in today, so I'll be able to do some things.
The phone is S-off.
Anyways, I would like to know how I would be able to:
-Remove CWM
-Recovery EVERYTHING to factory default
Also, I'm kind of a noob, so when it comes to telling me to let's say "flash amonra", please tell me how, or link to thread or something. If you can.
All help is appreciated...If I don't get this fixed I won't have a phone for a couple years.
Also, a tip: HTC Keeps track of those who unlock the bootloader on their phone, and tell Verizon. Which is how they find out even if you reflash, relock, etc.
First thing to do is get rid of that recovery! Soo many issues and you can use either the TWRP 2.1.1 recovery or AmonRA 3.15 (located in the dev threads). CWM causes phone charging issues (as you are aware) and I recommend not using it.
Are you familiar with flashing a recovery in fastboot? Were you running GB or ICS firmware?
I suggest you familiarize yourself with all the root lingo contained in this thread.
http://forum.xda-developers.com/showthread.php?t=1641670
Marcismo55 said:
First thing to do is get rid of that recovery! Soo many issues and you can use either the TWRP 2.1.1 recovery or AmonRA 3.15. CWM causes phone charging issues (as you are aware) and I recommend not using it.
Are you familiar with flashing a recovery in fastboot? Were you running GB or ICS firmware?
Click to expand...
Click to collapse
I believe you would use the command "fastboot flash recovery [file].img".
I wasn't running the IceCreamSandwich update, pretty sure of that. So it must be the GB. I would like to know how to remove the CWM.
QuintonS said:
I believe you would use the command "fastboot flash recovery [file].img".
I wasn't running the IceCreamSandwich update, pretty sure of that. So it must be the GB. I would like to know how to remove the CWM.
Click to expand...
Click to collapse
Yes that command is correct you just have to make sure the recovery file is in same folder as your fastboot.exe.
AmonRa recover is here http://forum.xda-developers.com/showthread.php?p=19205213
Sent from my ADR6425LVW using Tapatalk 2
Well, I fixed it. Or at least it seems. All I had to do was flash the latest RUU (which was actually the currently installed rom on my phone).
Well, hopefully clockworkmod is GONE.
QuintonS said:
Well, I fixed it. Or at least it seems. All I had to do was flash the latest RUU (which was actually the currently installed rom on my phone).
Well, hopefully clockworkmod is GONE.
Click to expand...
Click to collapse
CWM was great on my Incredible...but I've had the same problem you did with charging issues, not to mention backups that would freeze in mid stream.
Flashing a RUU was the only way I could find to fix it.
so I just rooted my HTC Amaze 4G and I downloaded several ROMs to try out different ones and see if they worked and no matter what ROMs I use, when I try to reboot the phone, it gets stuck at the white HTC logo screen.
I DID make sure I did a wipe data/factory reset and wipe cache partition before installing new zips from SD card.
list of downloaded ROMs:
-EnergyAMAZE_ICS.zip
-Energy_4.27.2012.Amaze.Sense.3.6_ICS.zip
-Speed Rom 3.1.0.zip
*first two I believe are part of the same ROM but were downloaded as two different zips.
This is my first time doing this and so far, I feel like a crippled and lost puppy. help with be very appreciated
What did you use to flash?
Over 10000!!! You bet I am.
I'm sure you just need to flash the kernel. Make sure you flash kernels with their respective roms to complete the process. Search for easy kernel flasher and follow the instructions.
P.s. Next time it might be easier, quicker, and better for the forum if you search for the answer to your problem before you create a new thread... Thanks
Over 10000!!! You bet I am.
xndabox said:
I'm sure you just need to flash the kernel. Make sure you flash kernels with their respective roms to complete the process. Search for easy kernel flasher and follow the instructions.
Over 10000!!! You bet I am.
Click to expand...
Click to collapse
well to start off, I did fix the problem by installing the original T-Mobile Amaze ROM which I will upload shortly because I did notice other people having the same problem.
As far as the flashing, I'm using Hasoon2000's rooting/recovery program that I downloaded from one of his threads and I don't quite understand how to flash it..is that when I go into recovery and "install zip from SDcard"?
..sorry I'm a n00b
sparty_hard said:
well to start off, I did fix the problem by installing the original T-Mobile Amaze ROM which I will upload shortly because I did notice other people having the same problem.
As far as the flashing, I'm using Hasoon2000's rooting/recovery program that I downloaded from one of his threads and I don't quite understand how to flash it..is that when I go into recovery and "install zip from SDcard"?
..sorry I'm a n00b
Click to expand...
Click to collapse
I don't use that program, but that sounds like it's the right setting. What is your recovery?
Over 10000!!! You bet I am.
xndabox said:
I don't use that program, but that sounds like it's the right setting. What is your recovery?
Over 10000!!! You bet I am.
Click to expand...
Click to collapse
ClockworkMod 5.0.2.6. was I doing this right?
Yes
But you need to flash the kernel!
Easy kernel flasher is the name of the program.
Or if you want to skip easy kernel flasher, you can search for 4ext recovery software. It is the only recovery that can flash a kernel without s-off
Over 10000!!! You bet I am.
xndabox said:
Yes
But you need to flash the kernel!
Easy kernel flasher is the name of the program.
Or if you want to skip easy kernel flasher, you can search for 4ext recovery software. It is the only recovery that can flash a kernel without s-off
Over 10000!!! You bet I am.
Click to expand...
Click to collapse
So I flash the kernel first, then use the recovery to install the ROM and I'm in the clear?
now my phone is just starting up, getting past the HTC screen and (since I am trying to get the new ICS ROM) gets to the screen with the multiple revolving rings and freezes, then resets itself. what now?
Yep you got it kernels are the heart of roms. The best way to get them flashed is 4ext but learning more about kernels and to flash it is important. Try a rom again. Flash the kernel with one of the programs I suggested and enjoy.
Hit the thanks button for me if you believe I helped.
Over 10000!!! You bet I am.
sparty_hard said:
well to start off, I did fix the problem by installing the original T-Mobile Amaze ROM which I will upload shortly because I did notice other people having the same problem.
As far as the flashing, I'm using Hasoon2000's rooting/recovery program that I downloaded from one of his threads and I don't quite understand how to flash it..is that when I go into recovery and "install zip from SDcard"?
..sorry I'm a n00b
Click to expand...
Click to collapse
i tried the tmo amaze rom but it didnt work for me still gets stuck at logo ? which one did you use.,?
sparty_hard said:
now my phone is just starting up, getting past the HTC screen and (since I am trying to get the new ICS ROM) gets to the screen with the multiple revolving rings and freezes, then resets itself. what now?
Click to expand...
Click to collapse
So you are trying to flash nrgz rom? Did you get the kernel flashed?
Over 10000!!! You bet I am.
I guess its fixed. Just use me and leave I guess.
Over 10000!!! You bet I am.
Haha of course not but I flashed and installed cynogen ICS theme and it worked perfectly!....except my phone couldn't connect to any sort of wireless signals whatsoever. Couldn't even make a phone call so close. Further advice or possibly a better ROM and kernel?
sparty_hard said:
Haha of course not but I flashed and installed cynogen ICS theme and it worked perfectly!....except my phone couldn't connect to any sort of wireless signals whatsoever. Couldn't even make a phone call so close. Further advice or possibly a better ROM and kernel?
Click to expand...
Click to collapse
That rom doesn't have any gsm or data..... Smh you have to read the entire post. But nrgz is the best rom to try. Ok I will post these directions for you.
try this, assuming you have a windows machine:
-download any ICS rom, extract the boot.img file, put it on your desktop
-download faux kernel, unzip the file on your desktop to keep it simple, and in the folder 'kernel-here' delete the boot.img in it and paste the boot.img you extracted from an ICS rom
-restart your phone in HBOOT and go to fastboot
-run the flash.bat batch file in the extracted folder from the faux kernel download, and let the command prompt run. It should tell you that the boot.img image was loaded.
restart your phone and hopefully you should be ok.
-courtesy of Andy55
Over 10000!!! You bet I am.
Check to make sure you are on the latest firmware. You will get bootloops if you are trying to install an ICS rom based of the leaked ruu and dont update the firmware on the phone.
you can get it here http://radioactivehobo.com/Amaze/Roms/PH85IMG.zip (from the arhd thread)
I'm in the same boat. I was unlocked, running CWM 5.8.0.9 (Touch) with the Stock T-Mobile Kernel. I tried to flash Android Revolution from NRG ICS. The flash failed, and now I'm stuck on the white screen. I can't get into any recovery. I have flashed all the recoveries in Hasoons kit (and in EasyKernelFlasher_V1.3), I have flashed all the Kernels, I have tried all the suggestions in this thread. I can get into Bootloader easy, but once I try recovery, when it reboots to go into recovery (or a fresh start up from a battery pull), it hangs in the white screen.
When I pull the battery, put it in and plug into my laptop via USB, the phone sits there while off and connects and disconnects to the laptop over and over. When I disconnect it, I can boot into bootloader. But that's about all.
Been at this for hours searching for the magic bullet. I can't find it.
Oooo K, I got this to work, and here's what I did.
First off, I was stuck on the white boot screen, and could never get into Recovery. It would re-boot and hang at the white screen. I flashed it all with Hasoons kit, but nothing would work. But here's what I did.
First, I found this thread.
Down in the thread was a link to this.- it's a faux Kernel.
I downloaded it and put it on the root of my SD card. I renamed it to the usual ph85img.zip and booted into fastboot. The phone found that file and loaded it. That got me into Recovery.
From there, I was able to take the ROM of my choice, put it on my SD, then flash it as usual. And when it re-booted, I had a working phone again! Wh00T!
the original Tmo stock ROM I used is T-mobile_1.43_Stock_Rom_testv1. I tried finding the link I originally got it from but couldn't so sorry about that, guys. All you have to do is wipe data/factory reset in recovery mode and wipe cache partition and then use Hasoon2000's toolkit to flash stock tmo kernel and then install the tmobile 1.43 stock rom from SDcard and that will make your phone go back to normal and you should not have a problem with the white HTC screen!
However, I still don't understand how some of you are getting these ROMs to work on your Amaze 4G. I think I'm doing it right so somebody critique my steps here:
-download rom found here
-Place on sdcard
-turn off phone and boot into fastboot
-flash boot.img found in ROM file
-phone restarts itself and freezes at revolving ring screen and repeats over and over again
-so I take battery out and restart into recovery
-install zip from SDcard
-and then BOOM....nothing..same thing happens where it freezes at the revolving ring screen
WHAT IS GOING ON?! could it be the kernel that's faulty? looks like the rom worked for other people just fine
Which Rom are you trying to flash? I hope you're not trying to flash an ICS Rom.. if you haven't updated to the Leaked ICS RUU then the Rom you might be trying to flash won't work. Check the Development threads. Read the OP and a few pages before asking on the thread.
-------------------------------------
Check out my hairless guinea pig
Hey Everyone! So here's the quick nitty gritty...
Flashed Clean Rom Standard and Left S-On
Worked great for about 8 months
Started crashing like crazy and the only fix was to go back to stock
Went to stock and then unlocked, S is still On
Flashed ClockworkMod 6.0.2.3
Can't get any aftermarket S-On Roms to work
It can never see a PH98IMG.zip file via fastboot/bootloader
So I'm stuck and I don't know what to do
Anyway, that's where I'm at. Right now the phone is working just fine but stock roms suck and it's FULL of bloatware that I can't get rid of. So...any ideas on what I can do? I'd love to use Clean Rom once again but I can't get the PH98 file to flash
More Phone Info...
Ver - 4.0.3
Sense - 3.6
Software - 4.03.605.2 710RD
Kernel - 3.0.16-g480e1b0
Thanks in advance!
AT
AlmostTactful said:
Hey Everyone! So here's the quick nitty gritty...
Flashed Clean Rom Standard and Left S-On
Worked great for about 8 months
Started crashing like crazy and the only fix was to go back to stock
Went to stock and then unlocked, S is still On
Flashed ClockworkMod 6.0.2.3
Can't get any aftermarket S-On Roms to work
It can never see a PH98IMG.zip file via fastboot/bootloader
So I'm stuck and I don't know what to do
Anyway, that's where I'm at. Right now the phone is working just fine but stock roms suck and it's FULL of bloatware that I can't get rid of. So...any ideas on what I can do? I'd love to use Clean Rom once again but I can't get the PH98 file to flash
More Phone Info...
Ver - 4.0.3
Sense - 3.6
Software - 4.03.605.2 710RD
Kernel - 3.0.16-g480e1b0
Thanks in advance!
AT
Click to expand...
Click to collapse
The newer roms are mostly made for S-OFF and do not create a ph98img file to flash with the boot.img you have to manually do it.
You should be able to flash by extracting the boot.img from the rom you want to flash, place it in your fast boot folder on your PC,
Open command prompt in that folder, and type fastboot flash boot boot.img
Hope this helps
Just saw your location
Hi Neighbor
kc6wke said:
The newer roms are mostly made for S-OFF and do not create a ph98img file to flash with the boot.img you have to manually do it.
You should be able to flash by extracting the boot.img from the rom you want to flash, place it in your fast boot folder on your PC,
Open command prompt in that folder, and type fastboot flash boot boot.img
Hope this helps
Just saw your location
Hi Neighbor
Click to expand...
Click to collapse
Haha Howdy!
Well, so I just tried using Nils ROM and it's supposed to be an all in one installer. I can see the installer saying everything is working but when it goes back to the boot loader screen it still isn't seeing the PH98 file...I'm not super familar with using fast boot on my PC as I'm still using older roms that always worked for me before when it came to flashing doing this method.
Sorry to be a pain in the a lol
AlmostTactful said:
Haha Howdy!
Well, so I just tried using Nils ROM and it's supposed to be an all in one installer. I can see the installer saying everything is working but when it goes back to the boot loader screen it still isn't seeing the PH98 file...I'm not super familar with using fast boot on my PC as I'm still using older roms that always worked for me before when it came to flashing doing this method.
Sorry to be a pain in the a lol
Click to expand...
Click to collapse
I'll chime in, but would say that getting acquainted with how ADB works from the PC would be of great help to you. I don't like it either, which is why I s-offed. It does occur to me though that, at the very least, you are rooted, so Titanium Backup will help you freeze and/or uninstall bloat. I just had to RUU because I borked my internal storage and I am running stock, without all of Big Reds crap, and I'm actually enjoying it for a few days...
Good Luck from the mid west!
AlmostTactful said:
Haha Howdy!
Well, so I just tried using Nils ROM and it's supposed to be an all in one installer. I can see the installer saying everything is working but when it goes back to the boot loader screen it still isn't seeing the PH98 file...I'm not super familar with using fast boot on my PC as I'm still using older roms that always worked for me before when it came to flashing doing this method.
Sorry to be a pain in the a lol
Click to expand...
Click to collapse
Sorry to be the bearer of bad news, but I don't see a way around your problem if you're unwilling to learn how to do things with fastboot or adb or (possibly) both. They're easy to figure out for basic operations, so just do it! (Hey, you're flashing custom ROMs, ya gotta give a little too! )
Good luck,
john
AlmostTactful said:
Haha Howdy!
Well, so I just tried using Nils ROM and it's supposed to be an all in one installer. I can see the installer saying everything is working but when it goes back to the boot loader screen it still isn't seeing the PH98 file...I'm not super familar with using fast boot on my PC as I'm still using older roms that always worked for me before when it came to flashing doing this method.
Sorry to be a pain in the a lol
Click to expand...
Click to collapse
There is one way to acquire temp "s-off" meaning you can flash ROMs in recovery and the boot image flash with it. It does do heavy work on your boot partition though. TWRP HTCdumlock there is instructions in flyhalf's TWRP thread to do this method
Sent from my Infected Rezound using xda app-developers app
Don't use CWM plain and simple. Switch over to TWRP. Only con, rebooting to bootloader manually. Also make sure you do a system/data/cache wipe prior to switching roms.
There is always the all in one tool that you can flash the kernel from but you still need to extract the boot img from the rom
I just rooted my phone, installed 2 different kernels, my phone's wifi now only 'Error's I factory restored (flash recovery with stock Evo info.)
Honestly I feel really stupid. I can't even flash my TWRP back on. Any advice or help would be greatly appreciated. I am fairly new to Rooting and its customizations. Thank you.
xFatex said:
I just rooted my phone, installed 2 different kernels, my phone's wifi now only 'Error's I factory restored (flash recovery with stock Evo info.)
Honestly I feel really stupid. I can't even flash my TWRP back on. Any advice or help would be greatly appreciated. I am fairly new to Rooting and its customizations. Thank you.
Click to expand...
Click to collapse
Can you access your recovery
Sent from my EVO using XDA Premium 4 mobile app
It might also help to post what ROM you were running, along with what two kernels you flashed. Certain kernels only work with certain ROM's (AOSP kernels don't work on Sense ROM's, and vice-versa). Take a look at the top link in my sig. At the bottom is a few helpful links. om4 has an excellent "Don't Panic" guide that contains some excellent info and really should be required reading for new users.
Sent from my HTC EVO 4G LTE
lreyes said:
Can you access your recovery
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I had no access to my TWRP Recovery, I actually fixed that though.
The Kernel is changed and now I have no Data access? I think my ROM is not compatible like suggested. (Sense ROM)
FinZ28 said:
It might also help to post what ROM you were running, along with what two kernels you flashed. Certain kernels only work with certain ROM's (AOSP kernels don't work on Sense ROM's, and vice-versa). Take a look at the top link in my sig. At the bottom is a few helpful links. om4 has an excellent "Don't Panic" guide that contains some excellent info and really should be required reading for new users.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
The current situations has changed sadly.
I have no custom ROM just Sense.
The Kernel: Bulletproof-EVO-v1.4.
ROM: Default Sense?
This is my first attempt at really rooting/adding kernels just messing around and doing damage.
Now instead of WiFi I have no Data Service with this Kernel and ROM combo. I will check out your links thank you very much.
FinZ28 said:
It might also help to post what ROM you were running, along with what two kernels you flashed. Certain kernels only work with certain ROM's (AOSP kernels don't work on Sense ROM's, and vice-versa). Take a look at the top link in my sig. At the bottom is a few helpful links. om4 has an excellent "Don't Panic" guide that contains some excellent info and really should be required reading for new users.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
Now my phone is stuck in bootloop I even tried to remove TWRP recovery to to StockRecovery...
Just let it die?
Or is there anyway to flash a Kernel via command prompt?
Anyway to fix this?
xFatex said:
Now my phone is stuck in bootloop I even tried to remove TWRP recovery to to StockRecovery...
Just let it die?
Or is there anyway to flash a Kernel via command prompt?
Anyway to fix this?
Click to expand...
Click to collapse
Hit the top link in my sig. I think you'll find what you're looking for there. Sounds like you may need to reflash your recovery from the bootloader via fastboot. Assuming that works, you need to due a full system wipe from recovery, then flash a ROM.
Sent from my HTC EVO 4G LTE
FinZ28 said:
Hit the top link in my sig. I think you'll find what you're looking for there. Sounds like you may need to reflash your recovery from the bootloader via fastboot. Assuming that works, you need to due a full system wipe from recovery, then flash a ROM.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
Do forgive me, I am reading your thread and advice.
I am just running on zero sleep in the past 4 days and trying to fix this all day.
The bootloop is gone now that I have flashed the TWRP recovery Stock recovery and Twrp again.
The stock recovery was still giving me the twrp startup screen (disclaimer at the HTC screen)
I also don't quite get what to do via Hboot 2.09 (what I have)
All the ROM's with the kernels are in a zip that needs to be opened via TWRP well the ones I download...
I have wiped the ceche/delvik etc... fear I wiped the whole thing by accident rendering the device empty.
My android's exe file doesn't seem to be about either.
Android version: 4.1.1
Software: 3.17.650? (The most recent for Evo commercially)
When I do attempt a Stock restore via fastboot flash not exe file I end up getting the red ! next to my phone and the phone doesn't reboot naturally.
Do I need to hunt down ROM's and Kernels that I can flash into the cmd?
I understand with my version I must flash in the using the prompt and have them separate but I am totally new at this I feel really dumb I'm sorry if I am bothering you with redundant questions I am attempting to follow and get the information but I think I am reading so many different threads on it I am suffering from information overload (artist not a programmer lol.)
EDIT:
NOTE:
I AM currently reading your bottom link about Fixing system wipe.
xFatex said:
Do forgive me, I am reading your thread and advice.
I am just running on zero sleep in the past 4 days and trying to fix this all day.
The bootloop is gone now that I have flashed the TWRP recovery Stock recovery and Twrp again.
The stock recovery was still giving me the twrp startup screen (disclaimer at the HTC screen)
I also don't quite get what to do via Hboot 2.09 (what I have)
All the ROM's with the kernels are in a zip that needs to be opened via TWRP well the ones I download...
I have wiped the ceche/delvik etc... fear I wiped the whole thing by accident rendering the device empty.
My android's exe file doesn't seem to be about either.
Android version: 4.1.1
Software: 3.17.650? (The most recent for Evo commercially)
When I do attempt a Stock restore via fastboot flash not exe file I end up getting the red ! next to my phone and the phone doesn't reboot naturally.
Do I need to hunt down ROM's and Kernels that I can flash into the cmd?
I understand with my version I must flash in the using the prompt and have them separate but I am totally new at this I feel really dumb I'm sorry if I am bothering you with redundant questions I am attempting to follow and get the information but I think I am reading so many different threads on it I am suffering from information overload (artist not a programmer lol.)
Click to expand...
Click to collapse
if youre S-OFF then you can just use ViperRUU and then reunlock your device.
lreyes said:
if youre S-OFF then you can just use ViperRUU and then reunlock your device.
Click to expand...
Click to collapse
S-ON.
I am attempting to download MeanBean after reading Fin's Fix.
Though I don't know if FlashImage GUI will work.
I also have to figure out how to flash .apk files too...
Sorry about the bother... I really am far below Novice at this I should have had someone holding my hand step by step lol.
Okay, so the problem with the Kernel originally was it wasn't compatible?
Then the next one with the service error was I suppose the same thing?
Then when I tried to restore apparently I wiped my phone of all Data resulting in a bootloop and being no one has the exe file for the factory RUU of the latest version for the Evo 4g LTE I had no way of restoring any of the files?
So then I stalked Fin's suggestions eventually lead me to MeanBean. at least it got me up and running... I attempted to back up with TWRP.
Which apparently doesn't work (I have to learn how to backup else where... Lets add it to my list.)
But after I attempted the back up I also attempted the instillation of "Operation Jelly Bean" I love the ROM I love the theme I love the sleekness
Apparently I am missing something with my touch panel software. I wish I could have kept the ROM but couldn't sadly (If you know what I am doing wrong I would love to keep that ROM in the future)
So with another failed ROM I tried to restore... which there was no restore when I went to do so... I was a little frustrated from my constant bricking as is...
I attempted factory restore apparently also wiped everything (Internal sd, external, everything.) I don't know what is up with that do you have any clue if its a glitch or am I just wiping it?
I also do Stock restore that does absolutely nothing for my phone anymore...
I will flash it... and it does nothing... it still runs like TWRP (disclaimer etc) but won't go to the twrp boot screen... this is a bit frustrating.