My new Touchpad don't seem to support ad-hoc wireless networks. It don't see them or let me join them by entering the SSID (network name) and password. Is there any software I can add or configuration change I can make to change this? I have a Windows Mobile cell phone that can share its connection over wifi, but its ad-hoc only and I use WEP.
Any ideas on what to do about adhoc networks? Any hacks or sideloaded software, if no official apps?
This KILLED me. I bought mine over the weekend while I was on vacation and the hotel had a catch-all page so I couldn't get through registration from that network. I figured no big deal and turned on my hotspot (Moto Photon) and it wasn't showing up. I configured a wifi shared connection on my laptop and it didn't show up. I thought I was insane! Ended up getting annoyed and driving up the road until I found an open network without a catch-all... My wife drove while I scanned for a connection. I know for a fact that they work with the Palm Pre's shared connection. What's up with the haterade HP?
I have an original droid and have this same issue as I understand cyanagen mod allows you to create a non ad hoc WiFi but I can't get a clear answer on this
So far I could not find an app or hack to allow the Touchpad to connect to an adhoc wifi either. I too have a WM phone (HD2). Unfortunately there is also no app for the WM phone that would allow it to broadcast infracstructure (non-adhoc) wifi.
Dissenter said:
This KILLED me. I bought mine over the weekend while I was on vacation and the hotel had a catch-all page so I couldn't get through registration from that network.
Click to expand...
Click to collapse
I had this problem also, but you can still make it work. Goto your networks wifi setting and flip the auto switch and wait. It takes some time (almost 5min for me) but it'll pickup the ip address and finish loading the setup pages.
I am trying to use my TP with the wifi from my Touch Pro 2. Any help would be appreciated.
This is a real let down, no ad-hoc support. And our WinMo phone and Motorola Triumph do not support Infrastructure mode.
SoftAP appears to be a requirement to tether with android phones.
Unfortunately my Galaxy Spica does not have this so until some wonderful magical person creates an app/patch which allows the Touchpad to Bluetooth tether or utilise ad hoc wifi networks my tablet will be housebound
also need help with HTC HD2 on winmo 6.5 tethering adhoc with touchpad.
i guess the more realistic solution will be HD2 running android?
For you rooted android phone users http://forum.xda-developers.com/showthread.php?t=1238382
I'm really annoyed about this. One of the main things I thought of when buying the touchpad was to tether it to my winmo phone and browse the internet on the move. I hope someone creates a patch soon to enable adhoc wifi.
Really disapointed that I can't tether my iphone 4 to my touchpad.
For the price I can live without gps, sd/micro sd card slot, usb but the not being able to tether this thing is a deal breaker for me.
All I wanted to be able to do with my touchpad is tether for mail, browse the web, music, and be able to watch movies and it seems this thing falls short on everyone of the fronts.
I wonder if its likely anyone will release a patch for WebOS to allow it to recognise and use AdHoc networks?!
Just upgraded my Samsung Galaxy Spica to 2.2 Froyo using kitchen - Enabled portable Wi-Fi Hotspot from the settings menu and now it works perfectly (open or with WPA2 PSK encryption)
Appears this was the only way to get it to work for me as the touchpad was not detecting the adhoc connection on 2.1.
for those with the HD2, try using MCCM HD v6 DESIRE ROM. I can tether to my touchpad with no problems.... first try, no setting tweaks or anything...
Through my searching it was my understanding that Ad-Hoc support could be injected to the touchpad, is there any progress on this front to make it more user friendly? It was pretty heavy linux speak.
Most of the threads I've seen are focusing on Android development for support. What about the webOS side of things?
This is what I'm referencing:
webos-internals
.org/wiki/Ad-Hoc_Networking*
Is there some reason this isn't a viable option? the signal issues? Seems if the method is there than all that it needs is to be more user friendly...
*argh! too newb to post links
CarbolDroid said:
Through my searching it was my understanding that Ad-Hoc support could be injected to the touchpad, is there any progress on this front to make it more user friendly? It was pretty heavy linux speak.
Most of the threads I've seen are focusing on Android development for support. What about the webOS side of things?
This is what I'm referencing:
webos-internals
.org/wiki/Ad-Hoc_Networking*
Is there some reason this isn't a viable option? the signal issues? Seems if the method is there than all that it needs is to be more user friendly...
*argh! too newb to post links
Click to expand...
Click to collapse
I tried what was described in the thread a few days ago. Ran into issue when trying to execute
/usr/sbin/wifidriver -i
no such file exised....
I have a Samsung Charge with Gummybear. I could not tether at first. I went to the tethering settings and changed the profile to a Samsung Fascinate. Then changed the Setup-Method to softap for Samsung (master). This did not work at first then I shutdown (using the task manager) the tethering app and restarted. Turned my wi-fi on the touchpad off, then on, and my SSID came up. Clicked connect and went to access control and approved my touchpad connection. Now it works.
Hope this helps someone.
Just a heads up for anyone using an iphone 4 with their touchpad.
If you upgrade to ios 4.3.3 or later you can enable wifi hotspot and this hotspot will thether with the touchpad without issue.
I was running ios 4.1 trying to use mywi without success and then decided to try this method and works like a charm.
I have an HTC Legend that I don't use anymore, an SGS+ and an Acer A501. All three are rooted and have CM9. I don't get wireless in a certain part of the house, and I was wondering if I could transform the Legend in a wireless repeater of sorts. Now, I think that's really possible just by connecting via wireless to the main network and then just running as a wireless hotspot, but I can't really place it somewhere decent enough to repeat my signal (it's complicated).
So, trying to get my tablet's wifi to connect to the computer's LAN via the HTC cell phone, I tried all last night with all sorts of variations, ending up with an app called Reverse Tether, which connects to the computer's internet via USB, and another called Foxfi / PDANet Tablet, which communicates (poorly) via bluetooth. The problem seems to be that most wireless tethers expect 3g/4g to be connected and don't work with anything else.
Now, is there a solution to my little conundrum? Am I doing something horribly wrong or is there no "app for that"?
Thanks!
I posted the exact same question a few days ago and have gotten an interesting response. Start looking for a bridge connection app!
Sent from my SGH-T959V using XDA
right, but let's hope there's also other options, as well
did u found any app
mihnead said:
right, but let's hope there's also other options, as well
Click to expand...
Click to collapse
did u guys found anything ??????
I have searched the forums and google for an answer to this but haven't been able to find anything.
What I'm trying to do is use my computers internet for my phone, and then broadcast it out. I've downloaded and used successfully the xda Android Reverse Tethering .exe and it's worked wonderfully. But the thing is I want to be able to use it in conjuction with a wifi tether app from my Samsung Galaxy S. My phone is rooted.
The purpose of this is to get internet connection on my PSP Vita. All of the internet in my house is wired, I don't own a wifi router nor do I want one. I live in a building where finding wifi passwords is easy for everyone as we all have the same general field of work, but no one near me has wifi.
What I've tried so far is using the xda Reverser Tether program with Barnacle Wifi Tether, Open Garden WiFi, and WiFi Tether. All apps I've downloaded from the marketplace. They work well at broadcasting my cell signal for use as Wifi, but none of them have been able to use the internet being sent from my phone.
In short what I'm looking for, or even if it exists, is a way to transfer my hard wired internet through my computer to my phone and subsequently the cellphones ability to act as a Wifi router.
Check my signature
Edit: *bump* I have removed it
check my threads
That looks close, but how could I use that, and then have my phone broadcast my internets computer through it's Wifi?
Hi ,
Use virtual router software in your pc and turn on pc and phones wifi.and connect to pcs wifi connection.if you have confusion try virtual router in google. i got succeeded in this but i dont have any link to give you.
If i helped press thanks.
This sounds like something that might do it. I have it downloaded but it's not doing anything. What were the steps you got to make it work for you?
Well, I was able to get it to work using redankaiahu's advice. The only thing is I had to go out and buy a usb-wifi adapter instead of using my phone like I would've liked. Oh well.
I know this really doesn't belong here, but did u know that if u get a router, u can actually change the frequency channel on it? Which means , no ones pc will pickup on the channel unless they adjust from their own pc's and know what channel u changed to.
Sent from my SPH-D700 using xda premium
Hello guys,
BBC iPlayer and TuneIn Radio will not play on my Android TV using Ethernet.
They both behave as though I had no internet connection and say I must connect to WiFi or phone data.
I saw a fix which does not work, to add FALSE to qaWifiOnlyMode.txt file, and put that in the root of the device, but this does not work.
I imagine that someone who knows a lot about hacking would find this easy to do, but I've looked for an answer for two days, and not found one.
Any boffins out there know how to sort this one?
Tx
Mark
The wifi hotspot is great but my Surface RT can't see it (yes I know the Surface RT is some old device)... The thing is I can see all the networks except the one produced by my phone. Already tried using Bluetooth internet sharing and didn't work, it's just these two don't get along.
I just need to change the hotspot setting from 802.11ac to something else, like 802.11b/g/n, I want to avoid using some USB wifi dongle on the tablet.
Thanks if anyone knows about how to do such changes.