I'm sure this had to have been addressed before but I can't find anything... Been searching for days now and still nothing..
Is there any way to boot into CWM recovery from power off? Like the hold x and power keys on the OG Droid.. I've tried holding vol up/down during boot.. up does nothing down brings me to the HTC boot loader and starts running the PG05IMO.zip update... I panicked and pulled battery before update started :-/ id hate to get stuck in a boot loop and not be able to boot into recovery if I'm not home to use adb to get into it...
Sent from Thor's hammer in a bolt of lightning
starscream86 said:
I'm sure this had to have been addressed before but I can't find anything... Been searching for days now and still nothing..
Is there any way to boot into CWM recovery from power off? Like the hold x and power keys on the OG Droid.. I've tried holding vol up/down during boot.. up does nothing down brings me to the HTC boot loader and starts running the PG05IMO.zip update... I panicked and pulled battery before update started :-/ id hate to get stuck in a boot loop and not be able to boot into recovery if I'm not home to use adb to get into it...
Sent from Thor's hammer in a bolt of lightning
Click to expand...
Click to collapse
delete the pg05img.zip off your sdcard, then power off the phone. Hold volume down + power until you get to the hboot screen then select recovery.
Thanks I actually did that while I was waiting for a response lol I guess writing my problem out helped me realize it might be searching for the update automatically.. I appreciate your quick response though
Sent from Thor's hammer in a bolt of lightning
So, I soft bricked my Rogers Motorola Razr when RSD Lite failed to flash a rom. I got into the "Flash Failure" screen. The phone wouldn't boot up as normal and after turning it off, it would turn right back onto that Flash Failure screen again. I was able to get out of this by pressing both volume keys and the power button simultaneously, where a menu would come up with a reboot option. I had to repeat the process again because it went back to the Fastboot screen.
Anyways, whenever I turn off the phone and turn it on again, I have to do the whole process again to boot normally. Is there any way to get back to the normal boot process again?
Also, could this be a method for soft bricked users to get out of the Fastboot screen? Some how I doubt it since it seems too simple. I probs just got lucky...
Thanks
I tried to flash the 651.167.3370.XT910.Brasil.en.BR rom on my rogers razr and right away i got a flash failure. I tried again and it started but froze withing 10 sec of flashing and now im stuck in fastboot. I can get out of it by holding down the power and volume keys but it brings me to the fastbot menu. So I press boot normal and it boots up but any time I restart my phone, I have to do the same sequence again
Edit. It was because my bat was at only 70%
ottawadad34 said:
I tried to flash the 651.167.3370.XT910.Brasil.en.BR rom on my rogers razr and right away i got a flash failure. I tried again and it started but froze withing 10 sec of flashing and now im stuck in fastboot. I can get out of it by holding down the power and volume keys but it brings me to the fastbot menu. So I press boot normal and it boots up but any time I restart my phone, I have to do the same sequence again
Edit. It was because my bat was at only 70%
Click to expand...
Click to collapse
Yes. Repeat the process. After flash wioe user data and cache. Just in case.
Sent from my XT910 using Tapatalk 2
I'm a bit of a noob at terminology and android settings so try to bear with me...
I'm running a deodexed vzw CleanRom v1.6.5 and I've downloaded TWRP recovery via gooManager. (Yes I've installed the recovery script from it.) Back when I had a stock rom, when I held the power + the volume up button it would go into TWRP recovery fine. But now (I don't know if it's CleanRom's fault) when I start up the phone into recovery mode using the shortcut the blue text would appear but it would restart normally.
My stock backup was corrupted for some reason and it softbricked my phone so I had to odin flash and go through all that rooting process again before restoring from my CleanRom backup via TWRP. So I don't really want to go back to stock, but I guess I can download a stock one if I really need to.
I can still enter TWRP by going into gooManager and pressing reboot recovery from there. Any solution to this?
I'm also on CleanRom 1.6.5 and it works for me... Vol up+power
Sent from my SCH-I545 using xda premium
To get mine to boot to recovery while phone is off I have to hold volume + and menu key at the same time. Then hit the power button until it vibrates then let go of the power button. If I keep holding the power button then the blue writing is displayed but instead of going into recovery it just reboots. However if I only hit the power button and release when it vibrates and I am still holding the volume + and menu key then it will boot to twrp recovery.
Alright, I'm feeling pretty foolish.
It was a simple user error that I really hate to admit. If I hold down the volume up and the power button and keep holding down both, the phone restarts as normal. But I should be letting go of the power button when the phone vibrates, while holding down the volume up button keeps it loading into the recovery mode. Don't know why I didn't have that problem before. I attempted Travis' idea first then experimented a little without the menu button and it worked fine.
Thanks.
Glad you got it figured out. :good:
Transpresence said:
Alright, I'm feeling pretty foolish.
It was a simple user error that I really hate to admit. If I hold down the volume up and the power button and keep holding down both, the phone restarts as normal. But I should be letting go of the power button when the phone vibrates, while holding down the volume up button keeps it loading into the recovery mode. Don't know why I didn't have that problem before. I attempted Travis' idea first then experimented a little without the menu button and it worked fine.
Thanks.
Click to expand...
Click to collapse
you could also go into recovery via the goomanager app
:laugh:
payaso805 said:
you could also go into recovery via the goomanager app
:laugh:
Click to expand...
Click to collapse
True and that is what he said he has been doing. However what if you flash something and you get a boot loop. You can pull the battery and try again but if it boot loops again you will need to be able to get to your recovery with a non booting phone. That is why it is important to know how to boot the phone into recovery with out the need of any apps.
Travisdroidx2 said:
True and that is what he said he has been doing. However what if you flash something and you get a boot loop. You can pull the battery and try again but if it boot loops again you will need to be able to get to your recovery with a non booting phone. That is why it is important to know how to boot the phone into recovery with out the need of any apps.
Click to expand...
Click to collapse
Precisely my thought process. I knew that at some time I'm bound to softbrick my phone again and I needed to boot recovery from startup.
Hey everyone (Again),
So i managed to unlock the bootloader and everything went smoothly but I flashed my recovery i can't get into it now it comes up with an error message everytime i try to get into recovery it says ' Your software cannot be checked for corruption' any way to get rid of this or do i have to re- lock the bootloader just to fix it and get recovery working.
Thanks again.
Anyone?
ZuneYT said:
Hey everyone (Again),
So i managed to unlock the bootloader and everything went smoothly but I flashed my recovery i can't get into it now it comes up with an error message everytime i try to get into recovery it says ' Your software cannot be checked for corruption' any way to get rid of this or do i have to re- lock the bootloader just to fix it and get recovery working.
Thanks again.
Click to expand...
Click to collapse
That's not an error message, that's the message you'll see every bit if you unlock the bootloader. Do NOT relock your bootloader after installing custom recovery. Also to get into recovery (provided you installed it correctly and it wasn't erased after it booted info Android) is to turn your phone off (or pull battery) and then hold volume down & power button, one you see the LG logo let go of the power button only (still hold volume down) for about 1 second and then press the power button again and hope (never let go of volume down). It will ask you if you want to reset your phone, select yes two times and you will enter TWRP. If it actually resets your phone, TWRP isn't installed. Usually after installing TWRP you need to pull battery then use above method to boot into recovery, mount system partition and use TWRP file manner to delete come named "recovery from boot.p". You can also go ahead and install SuperSU or magisk (use magisk if you need to be able to pass safety net). Hopefully this helps you, also next time please include what model phone you have and what steps exactly you did as it's easier for others to attempt to help you.
Mines a H850 running nougat as well but thats the only thing it wont boot to recovery because when i hold down the volume down button and the power button the lg logo shows up but then after 4 seconds that google message will pop up and that gets in the way of doing the method to get onto recovery thats my problem
ZuneYT said:
Mines a H850 running nougat as well but thats the only thing it wont boot to recovery because when i hold down the volume down button and the power button the lg logo shows up but then after 4 seconds that google message will pop up and that gets in the way of doing the method to get onto recovery thats my problem
Click to expand...
Click to collapse
You have to follow exactly what I posted earlier. If you do that, it will show the factory reset screen which is you have TWRP installed, it will not into TWRP.
1) Power off phone
2) Press and hold volume down (do not let go until you see factory reset screen)
3) Press and hold power button, when you see LG logo, let go of power button for 1 second and then press and hold again.
If you do not follow step 3, you'll never be able to boot to recovery using button combo, it will just go to that message and then boot into Android.
jeffsga88 said:
You have to follow exactly what I posted earlier. If you do that, it will show the factory reset screen which is you have TWRP installed, it will not into TWRP.
1) Power off phone
2) Press and hold volume down (do not let go until you see factory reset screen)
3) Press and hold power button, when you see LG logo, let go of power button for 1 second and then press and hold again.
If you do not follow step 3, you'll never be able to boot to recovery using button combo, it will just go to that message and then boot into Android.
Click to expand...
Click to collapse
Thanks for that! I got it working cheers
I'm actually having a similar issue too.
To clarify, I'm using a LG G5 (h830 variant) that is running resurrection remix.
I remember getting into recovery just to flash the updated modem and bootloader zips so I can fix the issue with powering off the device.
Now I noticed after doing that, I cannot get into recovery either with rebooting or with the button combo.
Thankfully I am rooted with magisk and this is probably the first time that I encountered this issue.
I don't want to further risk anything (because my phone is set up and don't want to lose any data) but would flashing twrp through the official app work just fine?
jeffsga88 said:
That's not an error message, that's the message you'll see every bit if you unlock the bootloader. Do NOT relock your bootloader after installing custom recovery. Also to get into recovery (provided you installed it correctly and it wasn't erased after it booted info Android) is to turn your phone off (or pull battery) and then hold volume down & power button, one you see the LG logo let go of the power button only (still hold volume down) for about 1 second and then press the power button again and hope (never let go of volume down). It will ask you if you want to reset your phone, select yes two times and you will enter TWRP. If it actually resets your phone, TWRP isn't installed. Usually after installing TWRP you need to pull battery then use above method to boot into recovery, mount system partition and use TWRP file manner to delete come named "recovery from boot.p". You can also go ahead and install SuperSU or magisk (use magisk if you need to be able to pass safety net). Hopefully this helps you, also next time please include what model phone you have and what steps exactly you did as it's easier for others to attempt to help you.
Click to expand...
Click to collapse
YOU SAVE MY LIFE!!!
i ran fastboot oem lock with custom firmware and the phone did not boot anymore and also does not enter in recovery mode
after 3 days installing many types of firmwares with this simple reset metod the phone boot again! :good::good::good::good:
jeffsga88 said:
You have to follow exactly what I posted earlier. If you do that, it will show the factory reset screen which is you have TWRP installed, it will not into TWRP.
1) Power off phone
2) Press and hold volume down (do not let go until you see factory reset screen)
3) Press and hold power button, when you see LG logo, let go of power button for 1 second and then press and hold again.
If you do not follow step 3, you'll never be able to boot to recovery using button combo, it will just go to that message and then boot into Android.
Click to expand...
Click to collapse
I know this is old,Just wanted to say thank it worked for me...
Been a while since I used LG and never with official bootloader unlock so I was thrown off by resetting to recovery as at first i never had the lg screen just the bootloader warning start
For those T-Mo G5 (H830) with unlocked bootloader, you will not see any LG logo. Once you see the lcd backlight comes on, immediately release the power button and press it again, all the while holding down the vol down button.
When you see the bootloader unlocked phone is unsafe msg by LG on the screen, it will already be too late and past the stage where you can boot to recovery. Simply power down and redo in that case.
(Needed to do the above as the latest Magisk 20.0 broke root and adb on H830, thus there was no way to get into recovery other than using the physical buttons. The Magisk Canary version of 20.1 works though.)