Guys today i tried to install new rom. so i rooted my custom rom and installed Rom manager and flashed Clockworkmod recovery. Then i rebooted into recovery. nothing happened. Now the phone is stuck at LG logo and nothing else is happening.
1. I tried KDZ updater. I phone is not detected.
2. Then tried lgmdp again phone can't be detected.
i dunno what to do. help guys. also my warranty period over. plz help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kiransabarish said:
Guys today i tried to install new rom. so i rooted my custom rom and installed Rom manager and flashed Clockworkmod recovery. Then i rebooted into recovery. nothing happened. Now the phone is stuck at LG logo and nothing else is happening.
1. I tried KDZ updater. I phone is not detected.
2. Then tried lgmdp again phone can't be detected.
i dunno what to do. help guys. also my warranty period over. plz help.
Click to expand...
Click to collapse
The CWM is not installed properly...your phone is not bricked.
Disable LG Virtual Modem in Device Manager and then your phone will be detected..Flash stock rom through kdz and then root.
Make sure the data is not switched off when downloading cwm (probably screen off = data off)
Dude relax this is heppen to me like 3-4 time.thats why i am not using rom manager to flash recovery.use lgmdp and flash recovery and flash any rom.and fellow all step and reinstall drive sometime phone detected.try 3-5 time and follow all steps.
vikasb32 said:
Dude relax this is heppen to me like 3-4 time.thats why i am not using rom manager to flash recovery.use lgmdp and flash recovery and flash any rom.and fellow all step and reinstall drive sometime phone detected.try 3-5 time and follow all steps.
Click to expand...
Click to collapse
Even LGMDP not detecting my phone dude. Thats the problem nw.
williamcharles said:
The CWM is not installed properly...your phone is not bricked.
Disable LG Virtual Modem in Device Manager and then your phone will be detected..Flash stock rom through kdz and then root.
Make sure the data is not switched off when downloading cwm (probably screen off = data off)
Click to expand...
Click to collapse
Dude i disabled and tried still phone is not getting detected. I shldn't have gone fr CWM recovery!!
Problem Solved!!!
The prob was mainly because of some problem with drivers. i uninstalled it and again installed the drivers now the phone is detected. Also i installed custom rom too... thnx fr those who helped...
Keep the phone switched off and try with lgmdp...it worked for me
It automatically turns on the phone and goes to emergency mode.don't even touch the phone until all the steps are done.
Try this: http://forum.xda-developers.com/showthread.php?t=1324105
( v10e link may not work, try v20c)
Sent from my LG-P500 running Ginger Snap
IKnowIRock! said:
Keep the phone switched off and try with lgmdp...it worked for me
It automatically turns on the phone and goes to emergency mode.don't even touch the phone until all the steps are done.
Try this: http://forum.xda-developers.com/showthread.php?t=1324105
( v10e link may not work, try v20c)
Sent from my LG-P500 running Ginger Snap
Click to expand...
Click to collapse
Why the hell you dont read gus reply !!!
Problem is already solved
IF YOU LIKE MY WORK, THANK ME BY THE BUTTON BELOW
rishabho1 said:
Why the hell you dont read gus reply !!!
Problem is already solved
IF YOU LIKE MY WORK, THANK ME BY THE BUTTON BELOW
Click to expand...
Click to collapse
Well I tried to be helpful.what are u? A mod??
If there are more people like u exist, XDA can't be called a "community"
And is this how u expect others to use the "BUTTON BELOW"??
Sent from my LG-P500 running Ginger Snap
Related
so i just unlocked my bootloader and tried to flash cm7 now the moto logo is jus flashing but nothing else i tried to use the backup i made right before flashing and the stock boot ani jus flashes too
please any help would be greatly appreciated or and my battery is to low to flash... go figure huh
Charge it first, that might be the problem. Are you using CWM?
Sent from my MB860 using XDA App
DopeHack said:
so i just unlocked my bootloader and tried to flash cm7 now the moto logo is jus flashing but nothing else i tried to use the backup i made right before flashing and the stock boot ani jus flashes too
please any help would be greatly appreciated or and my battery is to low to flash... go figure huh
Click to expand...
Click to collapse
Were you rooted before flashing cm7? because I experienced the same issue when I unlocked my BL and tried to install cm7 without root...tried different methods but none worked, I hope I'm wrong but I think you might have soft brick and the only method that worked for me was flashing a SBF file through rsdlite
Check out this thread, it will help you solve your issue http://forum.xda-developers.com/showthread.php?t=1138204
I did charge it the first time i plugged it in it went straight to the battery (good) but then a couple mins later my gf hit the wire knocking it out the socket i plugged it back it but now it jus goes to the moto logo and i was using this recovery.
http://forum.xda-developers.com/showthread.php?t=1138541
fkvx said:
Charge it first, that might be the problem. Are you using CWM?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
i tried and it chared the first time but now when i plug it in it goes straight to the moto logo
edit: its charging at 40% and the nest step is to flash a better rocovery i think. or a different kernel but how do i do this if i cant put phone into mass storage to copy it over ?
So can you charge your phone?
Can you enter fast boot mode?
Aren't you using rom racers recovery mod
http://forum.xda-developers.com/showthread.php?t=1204500
You could flash it via fastboot
Then perform a fastboot full wipe (there's a script that does it all, check dev section )
And tried reflashing cm7;
Or flash a stock rom check fruit cake
Sohoman said:
So can you charge your phone?
Can you enter fast boot mode?
Aren't you using rom racers recovery mod
http://forum.xda-developers.com/showthread.php?t=1204500
You could flash it via fastboot
Then perform a fastboot full wipe (there's a script that does it all, check dev section )
And tried reflashing cm7;
Or flash a stock rom check fruit cake
Click to expand...
Click to collapse
I figured out why my phone wasn't working well cm7 at least I was using the wrong recovery I flashed a cwm recovery and Bam it worked like a charm now I have no idea as to why the recovery I had at first wouldn't restore a backup that it had made but oh well its running smoother then ever before.
thanks to everyone on this thread and the few others I've been to.
Much appreciated
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from Atrix 4G running CM7 ICS Final @ 1.2Ghz
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i was on 2.3.4 OTA updated once AT&T i tried to unlock it's bootloader after rooting
i did everything right but while unlocking bootloader it got failed
sorry if it was posted before i googled and every link provied for solution was dead
can anyone give me a solution and working links thanks for reading
Youre already in fastboot mode. Simply follow the instructions for using fastboot to unlock. This is not a hardbrick and is a normal part of unlucking phones on 4.5.91+.
OMG this video worked fine and now i have my phone back working http://www.youtube.com/watch?v=pspIVBKGPRU
i installed permanent recovery can i install any custom rom ?
kasrawis said:
OMG this video worked fine and now i have my phone back working http://www.youtube.com/watch?v=pspIVBKGPRU
i installed permanent recovery can i install any custom rom ?
Click to expand...
Click to collapse
Yes, you can start flashing custom rom. Be sure to perform nandroid backup before flashing.
Sent from my MB860 using xda premium
can you give me a working link for custom firmware i can download ?
i am trying to find the video but it has been removed
can u post another link to another video or soo.....
i am exactly where you first post is
HELPPPPPPPPPPPPPP
Download the programe: https://www.dropbox.com/s/1qryq20dhduqiqx/Auto-Unlock Bootloader.rar
this programe has the fix of your problem. RUN the 'MAIN.bat' in the file. I do not remember its number in the menu but the menu will lead you to solve the problem. It must be 'FIX 105:1:2' or something like that.
Hit the 'thanks' if I helped
pls pls pls tell me its not bricked
tapeworm_george said:
Youre already in fastboot mode. Simply follow the instructions for using fastboot to unlock. This is not a hardbrick and is a normal part of unlucking phones on 4.5.91+.
Click to expand...
Click to collapse
Ok. I got the SAME screen. But i didn't root it before i unlocked it! (im new at this) and it says all that and batt too low to flash. and if i plug it into the usb it won't power on at all. just flashes the green light and nothing. if i plug it into a wall it brings up that screen. Will it not charge??? ugh pls pls pls help me. I just got this phone. I think i flashed the wrong sbf on it? idk what to do!!!!!! :crying::crying:
---------- Post added at 02:18 AM ---------- Previous post was at 02:07 AM ----------
karma1385 said:
Ok. I got the SAME screen. But i didn't root it before i unlocked it! (im new at this) and it says all that and batt too low to flash. and if i plug it into the usb it won't power on at all. just flashes the green light and nothing. if i plug it into a wall it brings up that screen. Will it not charge??? ugh pls pls pls help me. I just got this phone. I think i flashed the wrong sbf on it? idk what to do!!!!!! :crying::crying:
Click to expand...
Click to collapse
AND everything i DL trying to get the stuff to fix it. won't open. keeps saying unexpected end of archive and blah blah blah in winrar. idk wtf to do. im so frustrated right now. and i doubt anyone is gonna answer me cuz this thread is 6mon old. AHHHHHHHHHHH
karma1385 said:
Ok. I got the SAME screen. But i didn't root it before i unlocked it! (im new at this) and it says all that and batt too low to flash.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2054338
read the whole thread. the answer should be there.
I would flash ClockWorkMod as recovery.
http://www.clockworkmod.com/rommanager (search for Atrix 4G)
I prefer the Touch version, much easier to use.
Then just flash with fastboot:
fastboot flash recovery <yourImagePath>.img
Click to expand...
Click to collapse
Also, check out ePinter's CM10 (not the 10.1, it's not that stable), which you can flash from the new recovery. Don't forget the Google Apps package (install AFTER the main image).
http://forum.xda-developers.com/showthread.php?t=1781970
Hi Everybody,
I was trying to install a new version of cyanogenmod that held kitkat, worked, but heres the problem. After installing the new rom i wanted to put a different kernel. This specific kernel I wanted was not compatible with kitkat, but i wasn't reading, so when it was booting up it was stuck at the Galaxy S Cyanogenmod booting screen. I turned it off and put the device in cwm recovery. I was going to put the right kernel for the device but the SD wound't mount. I looked for a solution, which led me to odin. When I started flashing the status was frozen at nand start write. So I stupidly unplugged it, so now I am greeted with a Phone+!+PC please help me!
Gerard897 said:
Hi Everybody,
I was trying to install a new version of cyanogenmod that held kitkat, worked, but heres the problem. After installing the new rom i wanted to put a different kernel. This specific kernel I wanted was not compatible with kitkat, but i wasn't reading, so when it was booting up it was stuck at the Galaxy S Cyanogenmod booting screen. I turned it off and put the device in cwm recovery. I was going to put the right kernel for the device but the SD wound't mount. I looked for a solution, which led me to odin. When I started flashing the status was frozen at nand start write. So I stupidly unplugged it, so now I am greeted with a Phone+!+PC please help me!
Click to expand...
Click to collapse
Without seeing a picture of the screen, I'm going to have to assume the screen is a blue color with a picture of a computer on it.
If so, that's not a problem at all. That screen is basically the same thing as ODIN/Download mode.
With your device on that screen simply replug in your USB cable and reflash with ODIN.
If you could provide a picture of the screen, I could definitely say for sure that your device is good to go, or not.
Sent from my SPH-L710 using Tapatalk
Gerard897 said:
Hi Everybody,
I was trying to install a new version of cyanogenmod that held kitkat, worked, but heres the problem. After installing the new rom i wanted to put a different kernel. This specific kernel I wanted was not compatible with kitkat, but i wasn't reading, so when it was booting up it was stuck at the Galaxy S Cyanogenmod booting screen. I turned it off and put the device in cwm recovery. I was going to put the right kernel for the device but the SD wound't mount. I looked for a solution, which led me to odin. When I started flashing the status was frozen at nand start write. So I stupidly unplugged it, so now I am greeted with a Phone+!+PC please help me!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you're talking about this above, then do as Higgs_Boson said above. This is just a force download mode, and happens when you improperly flash something.
obscuresword said:
If you're talking about this above, then do as Higgs_Boson said above. This is just a force download mode, and happens when you improperly flash something.
Click to expand...
Click to collapse
Thanks for the help, but can anyone send me link to a flashable file for odin?
Gerard897 said:
Thanks for the help, but can anyone send me link to a flashable file for odin?
Click to expand...
Click to collapse
Actually nevermind about the download because I followed this tut http://forum.xda-developers.com/showthread.php?t=2432936 but after step 3, and putting my device in download mode, My computer won't now read it/notice it in odin. I have kies installed and it used to work before.
Gerard897 said:
Actually nevermind about the download because I followed this tut http://forum.xda-developers.com/showthread.php?t=2432936 but after step 3, and putting my device in download mode, My computer won't now read it/notice it in odin. I have kies installed and it used to work before.
Click to expand...
Click to collapse
Have you installed the drivers? If not, here's a link: http://forum.xda-developers.com/showthread.php?t=2038555
I was JUST in this situation, after fooling around with Ubuntu and the UnbrickerResurector, I was able to come back from Download Mode using the .pit and bootloader files from this thread...Flash them in Odin and you should be set.
http://forum.xda-developers.com/showthread.php?t=1386669
SAVED MY Galaxy Player!!!!
Yeah you bricked your device, I bricked my device like that before and all I had to to was flash rj's kernel and I was in cwm before I knew it. Try that to see if it will work
Sent from my YP-G70 using XDA Free mobile app
Hello there.
A couple of months back my friend was having trouble with her S3 and she had to reset e every couple of days. So I instructed her to install Cyanogenmod via the official installer. She did and it worked.
A few days back she told he it won't update and I guessed that it won't for the lack of CWM so I told her to get Rashr from the Play Store and flash a custom recovery, which she did successfully. Even though the phone wouldn't update anyway.
So last night she told me that her phone stopped booting up completely. When booting to recovery and trying to flash a zip through CWM doesn't work because it keeps telling her "E: no sd card" or something like that. Now she doesn't have an SD card, but my understanding is that this refers to the internal storage too. So why can't the recovery read it?
Furthermore I tried to get her to flash another recover via Odin, but Odin fails to flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have no idea what to do now. Do you guys know what could be going wrong?
Mr0nLine said:
Hello there.
A couple of months back my friend was having trouble with her S3 and she had to reset e every couple of days. So I instructed her to install Cyanogenmod via the official installer. She did and it worked.
A few days back she told he it won't update and I guessed that it won't for the lack of CWM so I told her to get Rashr from the Play Store and flash a custom recovery, which she did successfully. Even though the phone wouldn't update anyway.
So last night she told me that her phone stopped booting up completely. When booting to recovery and trying to flash a zip through CWM doesn't work because it keeps telling her "E: no sd card" or something like that. Now she doesn't have an SD card, but my understanding is that this refers to the internal storage too. So why can't the recovery read it?
Furthermore I tried to get her to flash another recover via Odin, but Odin fails to flash
I have no idea what to do now. Do you guys know what could be going wrong?
Click to expand...
Click to collapse
Seems ok from what i can see. Maybe rookie mistake, usb debbuging on?
if it is on then you need to flash stock rom and root again.
andjeomilosrdja said:
Seems ok from what i can see. Maybe rookie mistake, usb debbuging on?
if it is on then you need to flash stock rom and root again.
Click to expand...
Click to collapse
Thanks for your response.
To be honest I'm not sure if it's on or not since the device isn't booting up anymore.
How can I flash the stock Rom from recovery when it can't even see the storage?
Mr0nLine said:
Thanks for your response.
To be honest I'm not sure if it's on or not since the device isn't booting up anymore.
How can I flash the stock Rom from recovery when it can't even see the storage?
Click to expand...
Click to collapse
By going into download mode , power,volume down and menu button
You needed to be in download mode for flashing recovery also,right?
Mr0nLine said:
Thanks for your response.
To be honest I'm not sure if it's on or not since the device isn't booting up anymore.
How can I flash the stock Rom from recovery when it can't even see the storage?
Click to expand...
Click to collapse
You can't you need odin to flash any stock rom not a recovery.
Can you still get into download mode? If so try to flash a full stock rom from Sammobile with odin if that fails try the emergency recovery here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 <<
Help! I just unbricked my Le Max 2, it reboots with the screen splitted into two, the left half on the right and the right half on the left. Please can anyone kindly help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after unbrick.
I use FlashOne 1.9 and a QFIL rom to unbrick it.
unbrick it again.
AhmadSant said:
unbrick it again.
Click to expand...
Click to collapse
re-unbricked, same result.
ok, can you do firstly reset factory, then try to install another rom.
AhmadSant said:
ok, can you do firstly reset factory, then try to install another rom.
Click to expand...
Click to collapse
factory reset and flashed another rom via fasboot, but reboot stuck at the start screen, just like the left one on the photo I submitted.
Do another unbricking, and everything back to the state I reported.
It's confirmed to be a hardware problem, when the monitor is replaced, everything back to normal.
I think there is problem with build.prop .. try google ... To restore build.prop
It seems that the Kernel is also affected so it must be hardware problem
hi did you solve this?
I have the same problem
KM141 said:
Click to expand...
Click to collapse
Hi, I have exactly the same problem after following the tutorial in here to get rid of the vendor encrypted god damn rom. Everything was working right before it so I don't buy the hardware issue. After flashing using flashone 2.0 I did ended up with my screen like this.
I tried several qfill file from severals sources and always the same result. I even try to go on and flash TWRP and RR rom but screen stay that way.
Please, I'm seriously desperate right now... I need your help guys and looks like i'm not the only one.
KM141 said:
Click to expand...
Click to collapse
Bambulbizarre said:
Hi, I have exactly the same problem after following the tutorial in here to get rid of the vendor encrypted god damn rom. Everything was working right before it so I don't buy the hardware issue. After flashing using flashone 2.0 I did ended up with my screen like this.
I tried several qfill file from severals sources and always the same result. I even try to go on and flash TWRP and RR rom but screen stay that way.
Please, I'm seriously desperate right now... I need your help guys and looks like i'm not the only one.
Click to expand...
Click to collapse
It was solved without replacing the screen!
Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-max-2/help/flash-eui-rom-fastboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!) and not from one installed
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*
Really big thanks to ThE_MarD for his help!
For complete version :
https://forum.xda-developers.com/showpost.php?p=74890577&postcount=138
Bambulbizarre said:
It was solved without replacing the screen!
Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-max-2/help/flash-eui-rom-fastboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!) and not from one installed
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*
Really big thanks to ThE_MarD for his help!
For complete version :
https://forum.xda-developers.com/showpost.php?p=74890577&postcount=138
Click to expand...
Click to collapse
To put a file on the phone while in twrp just use adb push
KuranKaname said:
To put a file on the phone while in twrp just use adb push
Click to expand...
Click to collapse
That's what I tried but as stated in the last link, I had no connection to adb while in twrp after cleaning up.
Anyway that's settled for me, it's mor for other that have encountered this as well. Replacing screen is not the only way.