im currentlly on minicm7 and usin naaa kernel for it...
i want to upgrade to ICS kernel but when i flash the ics kernel it stock at 10 percent.. i use this http://forum.xda-developers.com/showthread.php?t=1636504
please help me i cant upgrade my x10 mini.. tnx
rage04 said:
im currentlly on minicm7 and usin naaa kernel for it...
i want to upgrade to ICS kernel but when i flash the ics kernel it stock at 10 percent.. i use this http://forum.xda-developers.com/showthread.php?t=1636504
please help me i cant upgrade my x10 mini.. tnx
Click to expand...
Click to collapse
this forum is for Xperia X10i.
please post in relevant forum.
rage04 said:
im currentlly on minicm7 and usin naaa kernel for it...
i want to upgrade to ICS kernel but when i flash the ics kernel it stock at 10 percent.. i use this http://forum.xda-developers.com/showthread.php?t=1636504
please help me i cant upgrade my x10 mini.. tnx
Click to expand...
Click to collapse
is it the e10 robbyn or u20 mimmi that you have? if you have the u20 then redownload the kernel and flash the rom again. if not go to the e10 section download the kernel and the rom.
Related
i just wanted to know that can i install custom.zip of WB rom through xrecovery from my x10 runing 1.6 ????
sorry for a dumb ques...
thnx...
mirajp1 said:
i just wanted to know that can i install custom.zip of WB rom through xrecovery from my x10 runing 1.6 ????
sorry for a dumb ques...
thnx...
Click to expand...
Click to collapse
ya it will work !! jus try if it doesnt jus flash any 2.1 Rom and then install Custom.zip of WB
Wait, wait, wait .... !
Not so fast!
As you can read in WB's thread on the OP it needs BB.71 and 2.3 Kernel.
"The following steps are only required if you don't have the new 2.3 kernel and .71 baseband, if you do have them you can reboot your phone and enjoy this ROM."
So, YES you can flash WB's ROM directly with your xRec BUT after you need to upgrade the KERNEL and the BASEBAND with FLASHTOOL!
Good luck
thnx..i just flashed to 2.1 dn thru xrecovery WB....
i just found that theres no xrecovery for 1.6 i gues..
hello ,
i have a X10 mini with miniCM7 2.1.6 firmware and nAa kernel 07 and i have many problem with this rom and this kernel so i would like to restore the SE original kernel and ROm . WHAT SHOULD I DO , help me plz ????
thx
just flash it with flashtool or SEUS, many threads that explain that
how ?? if i flash the stock kernel with flashtool i can 't access to xrecovery or cwm to do the update zip (=install the stock ROM )....
can i use directly http://forum.xda-developers.com/showthread.php?t=1228295 ??
download this and flash with flashtool
problem solved
i will try this i hope it will work !
this download is a kernel or rom or rom+kernel ?
thx for you , GOOD job
If that doesn't work try this. Tutorial made by Emperor.dk so thank him.
HooLIMAN87 said:
If that doesn't work try this. Tutorial made by Emperor.dk so thank him.
Click to expand...
Click to collapse
Not that I ever would go back to stock rom
But I thanked you for helping.
Sent from my E10i using xda premium
I'm using nAa kernel v0.9 and his rom CM7 2.1.7 for x10 mini pro, best rom and kernel for our little phones
SEUS (Sony Ericsson Update Service) is possibly the simplest to go back to stock as you don't have to worry about downloading the right rom and kernel and all of that. Just install, run and have a cup of coffee while you wait.
It doesn't root or install CWM though.
By the way, what problems are you having with the rom and kernel?
Ticklefish said:
SEUS (Sony Ericsson Update Service) is possibly the simplest to go back to stock as you don't have to worry about downloading the right rom and kernel and all of that. Just install, run and have a cup of coffee while you wait.
It doesn't root or install CWM though.
By the way, what problems are you having with the rom and kernel?
Click to expand...
Click to collapse
I was wondering that to..
Usually a simple wipe or maintanence does the trick..
Kaminek said:
i will try this i hope it will work !
this download is a kernel or rom or rom+kernel ?
thx for you , GOOD job
Click to expand...
Click to collapse
that is rom+kernel, just flash it
Kaminek said:
hello ,
i have a X10 mini with miniCM7 2.1.6 firmware and nAa kernel 07 and i have many problem with this rom and this kernel so i would like to restore the SE original kernel and ROm . WHAT SHOULD I DO , help me plz ????
thx
Click to expand...
Click to collapse
Stock!!! Whz would someone wanted to go back on stock?
Have you try minicm7 2.1.7 + nAa 09 kernel ??
I just flashed to miniCM 2.1.7 + nAa-09. Very satisfied! as I always am with MiniCM
Feel-good-story:
I was in the process of buying a new phone about a half a year ago when I decided to try a custom rom (miniCM). After that I felt like I got my new phone, and it's still going strong...
I actually think I would rather use my old Nokia 6100 instead of a X10 mini with stock rom!
i dont know why my touch screen now dont work anymore.. im using custom rom and unlock bootloader..i've not encounter this so far.. help me to find this solution
delmarz said:
i dont know why my touch screen now dont work anymore.. im using custom rom and unlock bootloader..i've not encounter this so far.. help me to find this solution
Click to expand...
Click to collapse
Flash Stock ROM..
May be the problem is with the touch screen drivers..
Tell us exactly, WHICH custom ROM did you install. Which version and for which phone.
may b u flashed wrong rom try to reflash the rom of mini pro (mango)
Just Try This
delmarz said:
i dont know why my touch screen now dont work anymore.. im using custom rom and unlock bootloader..i've not encounter this so far.. help me to find this solution
Click to expand...
Click to collapse
First you flash latest stock rom (.62) via flash tool.
If it is not working then
first flash x kernel via flashboot mode in flash tool
install ROM (hybrom v10) via CWM.
After that install ROM (hybrom v12) via CWM without wiping any data, cache partition and dalvik cache.
hope it will help you to solve this touchscreen problem.
@jk347.. can u upload the hybrom v10 since hybrom now is closed
@someguy.. im using realics v4 for xperia mini pro (mango)
guys can you upload via flash the touch screen drivers? if possible?
Best of Luck
here is the link for downloading hybrom v10 for mini pro
https://dl.dropbox.com/u/61884099/hybrom_v10.zip
best of luck !!!
flash x kernel for hybrom
delmarz said:
@jk347.. can u upload the hybrom v10 since hybrom now is closed
@someguy.. im using realics v4 for xperia mini pro (mango)
guys can you upload via flash the touch screen drivers? if possible?
Click to expand...
Click to collapse
x kernel for mini pro
http://dl.dropbox.com/u/28961326/kernel/kernel_mango-v4.zip
thanks jk347.. btw you also encountered this matter before? should i try hybromv17 instead of v10? why is it v10 not the latest one which is v17 ?
EDIT: could you please upload stock rom .62? coz mine is .42 is it ok to flash even if not .62?
I encountered error when flashing .62 --> never got success. But nothing problem when flashing .42. :beer:
Sent from my SK17i using xda app-developers app
when I flashing hybrom v17 in .42 gets stuck in sony logo.. can u upload guys the stock rom of .62 ftf files?
Hybrom requires unlocked bootloader and custom kernel to run.
For stock firmware files, check my signature link.
@someguy.. yes i already unlocked bootloader .. and use xkernel for the hybromv17.. since I used .42 when i flash xkernel and install custom kernel gets stock at logo.. but when I used .62 it works..now i dont see any .62 ftf here for mini pro ..
delmarz said:
@someguy.. yes i already unlocked bootloader .. and use xkernel for the hybromv17.. since I used .42 when i flash xkernel and install custom kernel gets stock at logo.. but when I used .62 it works..now i dont see any .62 ftf here for mini pro ..
Click to expand...
Click to collapse
so you are searching for .62 firmware for mini pro ?
this thread http://forum.xda-developers.com/showpost.php?p=27376024&postcount=3 has all firmware you need
@pahazax.. is it ok to use .62 in sk17a? since my phone is sk17i?
As I have upgraded my Sony Ericsson Xperia X10 to a Sony Xperia S the beginning of this year, I gave my old X10 to my younger sister.
It is currently running Wolfbreaks latest GB ROM with DooMKernel.
I am looking to upgrade to ICS.
Can anyone link me to the most stable ICS ROM?
And what are the steps into flashing it?
Is it like back then where you flash stock ROM then root and then enter CMW and flashing Custom ROM?
What about kernel?
I really do apologize for my noobiest... I haven't touch the X10 forums since AGES. D;
They Are All stable, but you should try the new v2 of feralab ics.. And Gingerbread still seams to be faster than ics so it's your choice
lythanhlong said:
As I have upgraded my Sony Ericsson Xperia X10 to a Sony Xperia S the beginning of this year, I gave my old X10 to my younger sister.
It is currently running Wolfbreaks latest GB ROM with DooMKernel.
I am looking to upgrade to ICS.
Can anyone link me to the most stable ICS ROM?
And what are the steps into flashing it?
Is it like back then where you flash stock ROM then root and then enter CMW and flashing Custom ROM?
What about kernel?
I really do apologize for my noobiest... I haven't touch the X10 forums since AGES. D;
Click to expand...
Click to collapse
flashing method is still the same. latest flashtool is 0.9.8.0: http://forum.xda-developers.com/showthread.php?t=920746
list all available ICS roms are located here: http://forum.xda-developers.com/showpost.php?p=30611459&postcount=3
good luck!
Hey i suggest you the followings:
http://forum.xda-developers.com/showthread.php?t=1782771
http://forum.xda-developers.com/showpost.php?p=25331067&postcount=2452
Just flash Fera's V2. Didn't see much problem, but if it's for your little sister, I'll suggest stick with GB ROM for now.
vichoh said:
Hey i suggest you the followings:
http://forum.xda-developers.com/showthread.php?t=1782771
http://forum.xda-developers.com/showpost.php?p=25331067&postcount=2452
Click to expand...
Click to collapse
Hi,
I have installed the ROM and Kernal (FeraKernal V4) from following link,
http://forum.xda-developers.com/showthread.php?t=1782771
But, am not getting the Google Play icon and also not able to ADD the Google acount in my phone. WHy ?
Xperia X10 stable rom?
Can anyone tell me what is the stable rom for Xperia x10? i want to update my x10...please
donuthd is stable, fast and battery friendly.
Sent from my X10i using xda premium
jodiexda said:
Can anyone tell me what is the stable rom for Xperia x10? i want to update my x10...please
Click to expand...
Click to collapse
Goto following link and Install a FerKernal V4 and ROM, you need to install a ADD on package-1 and other apps to get the Google Play after installation of ROM and Kernal.
You will get the Addon packages and SEMC apps in the thread itself.
Its preety good and stable.
http://forum.xda-developers.com/show....php?t=1782771
hi guys n gals, dont mean to sound silly but is the froyo bread custom rom installed onto the gingerbread kernel? i currently have the jellybean kernel at the minute but its very slow on my x10mini
shaunPS378 said:
hi guys n gals, dont mean to sound silly but is the froyo bread custom rom installed onto the gingerbread kernel? i currently have the jellybean kernel at the minute but its very slow on my x10mini
Click to expand...
Click to collapse
All Froyo-based ROMS run on stock SE kernel.
any idea where i get the stock SE kernel from? and do i use flashtools to flash it?
shaunPS378 said:
any idea where i get the stock SE kernel from? and do i use flashtools to flash it?
Click to expand...
Click to collapse
x10mini or x10minipro? There should be some available in the development forums maybe.
Failing that: Go back to stock with PC Companion or SEUS, Install xRecovery with Flashtool and flash the ROM from your sd-card.