Hi all,
I've read loads of conflicting information on this so hoping someone can point me in the right direction. I understand that it is fairly simple to change my CSC. Currently I'm on VOD, and the last firmware I received is dated 5 June. Am I right in thinking there has been another update since then, and it just hasn't been pushed out on my CSC?
Also, does changing the CSC cause any problems with the phone or void warranty?
Cheers,
James
CSC change will not void warranty.
Firmware is not reliant on CSC for upgrades alone .
Vodaphone last UK firmware released LF1
Firmware info: PDA: BUALF1| Phone: BULF1 | CSC: VFGALF1
Available in stock rom thread .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Related
Hi,
I'm new to Android and Galaxy S2. My phone was purchased in Spain from Vodafone.
I have just upgraded my ROM as per Intratech's guide (thanks by the way for the nice gude). The upgrade went good but after upgrae Kies shows the old CSC and says it can't update. Is this expected? I thought the CSC was supposed to change to the generic one.
I used ROM XWKE7 from the guide. After upgrade I get the following:
Doing *#1234#, I get:
PDA: I9100XWKE7
PHONE: I9100XXKE4
CSC: I9100XEUKD1
Doing *#272*<your IMEI>#, I get
ATL
In Kies it shows:
PDA: KE7 / PHONE: KE4 / CSC:KD1(ATL)
- Can someone please clarify?
- I'd also like to know if after this I still have to do something else to unlock the phone to use with a different provider.
- I was hoping to leave the phone as unbranded so future updates will be picked up through Kies.
Thanks in advance for your help.
nicolas2011 said:
Hi,
I'm new to Android and Galaxy S2. My phone was purchased in Spain from Vodafone.
I have just upgraded my ROM as per Intratech's guide (thanks by the way for the nice gude). The upgrade went good but after upgrae Kies shows the old CSC and says it can't update. Is this expected? I thought the CSC was supposed to change to the generic one.
Depends upon what CSC flashed their is no generic CSC .
I used ROM XWKE7 from the guide. After upgrade I get the following:
Doing *#1234#, I get:
PDA: I9100XWKE7
PHONE: I9100XXKE4
CSC: I9100XEUKD1
Doing *#272*<your IMEI>#, I get
ATL
In Kies it shows:
PDA: KE7 / PHONE: KE4 / CSC:KD1(ATL)
- Can someone please clarify?
- I'd also like to know if after this I still have to do something else to unlock the phone to use with a different provider.
Debranding is not unlocking .
- I was hoping to leave the phone as unbranded so future updates will be picked up through Kies.
Kies updates branded phones .
CSC
http://forum.xda-developers.com/showthread.php?t=1075278
Spoof FW
http://forum.xda-developers.com/showthread.php?t=1110160
jje
Click to expand...
Click to collapse
Thanks very much for this info. At the end I did a factory reset after updating and now phone shows XEU as expected.
Hey Guys,
I've tried all morning to find out what i should pick to flash my new phone, i've searched the forum but atm everything is kinda making me go crazy. I've understand that Different regions got different firmware, i've checked the post about all the official firmware. But now I must admit, i've given up and admit to seek help in here.
My phone:
PDA: I9100XWKF3
Phone: I9100XXKE7
CSC: I9100XXKF1
Location: Denmark
Language: Danish
Android: 2.3.3
NEW FIRMWARE:
I wish to run 2.3.4 ofc, so im looking for a firmware that enables this.
I've found by reading allot of posts in here, that this site have allot:
http://www.samfirmware.com/WEBPROTECT-i9100.htm
The problem is, that they have allot of different and seems to make no sense, wich one i should pick.
Here is a little list:
I9100XXKG1 ## EXT4.PIT 2.3.4 2011 July 5 MULTI - CSC - OXAKG1
I9100XXKH3 ## EXT4.PIT 2.3.4 2011 August 12 MULTI - CSC - OXAKH13
I9100XXKH1 ## EXT4.PIT 2.3.4 2011 August 1 MULTI - CSC - OXAKH1
Problem:
My phone is atm at: I9100XWKF3 and on the list there is no such thing. Only KH1-KH3-KG..
What is the risk by flashing one of them?, i mean KF and KH is not the same i guess...
Could someone please help me to find the right one for me?
Many THanks.
Well you are on KF3 firmware like me. It's an old build. Still 2.3.4 hasn't released officially yet, so only option is a leaked ROM if you wanna get 2.3.4. Just download an European firmware from this thread,
http://forum.xda-developers.com/showthread.php?t=1075278
There is NO risk involved, but keep in mind that it's not the Official firmware, so Kies will stop giving you any information on future firmware updates.
Regards.
KH3 latest.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Post 3 .
Risk almost nil
jje
ithehappy said:
Well you are on KF3 firmware like me. It's an old build. Still 2.3.4 hasn't released officially yet, so only option is a leaked ROM if you wanna get 2.3.4. Just download an European firmware from this thread,
http://forum.xda-developers.com/showthread.php?t=1075278
There is NO risk involved, but keep in mind that it's not the Official firmware, so Kies will stop giving you any information on future firmware updates.
Regards.
Click to expand...
Click to collapse
Would there be any idea in waiting for the official release?...
If not, wich one of the firmwares from the link you gave me would fit me best?..
Mikkel D. Hansen said:
Would there be any idea in waiting for the official release?...
You wait and you wait . your choice .
If not, wich one of the firmwares from the link you gave me would fit me best?..
KH3 Multi CSC if their is no CSC for your location .
jje
Click to expand...
Click to collapse
JJEgan said:
KH3 latest.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Post 3 .
Risk almost nil
jje
Click to expand...
Click to collapse
XXKH3
Android 2.3.4
This package has: PDA: XXKH3| Modem/phone: XXKH3| CSC: OXAKH3.
Download: http://www.multiupload.com/P92D3CE95I
XXKH3 Stock Kernel: http://www.multiupload.com/C4DRUIJTLL
Password: [email protected]
This would fit?... And whenever the official release is out, i could just flash back and kies would update?!
OBS:
What is OXAKH3.??
Mikkel D. Hansen said:
XXKH3
Android 2.3.4
This package has: PDA: XXKH3| Modem/phone: XXKH3| CSC: OXAKH3.
Download: http://www.multiupload.com/P92D3CE95I
XXKH3 Stock Kernel: http://www.multiupload.com/C4DRUIJTLL
Password: [email protected]
This would fit?... And whenever the official release is out, i could just flash back and kies would update?!
OBS:
What is OXAKH3.??
Click to expand...
Click to collapse
OXA is POLISH
Read post 3 .
jje
OXAKH3 is KH3 firmware of Europe region.
Official update should be coming soon, depends on damn Samnsung, when they will release it to Kies servers. If you want Kies updates, then as I said, you need to be on a Stock firmware, Kies won't show any updates if your device is on a Custom/Leaked firmware.
Regards.
I'm thinking of upgrading my firmware but not with Kies after reading some failure of some users in updating theirs using Kies.
My problem is I bought my phone here in the Philippines and I don't know if my phone is compatible with the software posted here.
Philippines
PDA: XWKF1
PHONE: DXKF1
CSC: LBKE5
Just download a firmware of your choice from this thread,
http://forum.xda-developers.com/showthread.php?t=1075278
Besides, there is NO issues with Kies update.
Regards.
So regardless of regoin, nothing will happen to my phone?
Pick one as near as possible to your region .
You will need to read the tread and firmware descriptions .
jje
Would there be incompabilities if I download a different firmware?
Or does anyone have any idea on what version to download with the information I posted?
Hello
I have unbranded Galaxy S II, with CSC "XEU".
Latest upgrade through Kies I had at September, and now firmware is:
Europe XEU - I9100XWKI4 / I9100XEUKH2 (Android 2.3.4 Gingerbread)
Since than no more updates were available in Kies...
Does anybody know if this will change?
I see Europe firmwares for CSC "OXA", but for this I should probably first use Odin to change firmware.
What is difference between "XEU" and "OXA" in general?
--
Przem
prkrol said:
Hello
I have unbranded Galaxy S II, with CSC "XEU".
Latest upgrade through Kies I had at September, and now firmware is:
Europe XEU - I9100XWKI4 / I9100XEUKH2 (Android 2.3.4 Gingerbread)
Since than no more updates were available in Kies...
Does anybody know if this will change?
You get updates when you get them is the simple answer .
I see Europe firmwares for CSC "OXA", but for this I should probably first use Odin to change firmware.
YES
What is difference between "XEU" and "OXA" in general?
--
XEU = UK
OXA = Poland
http://forum.xda-developers.com/showthread.php?t=1075278
Questions = Q&A section .
jje
Click to expand...
Click to collapse
They are just region codes.
CSC's just have APN settings and maybe some operator specific apps, any region specific rom will work anywhere in the world.
Hi
Is there general CSC for Europe?
If:
"XEU = UK; OXA = Poland"
Than really there is no new update for UK?
2.3.4 is letest Android?
somehow funny
--
Przem
Can someone confirm, that unbranded SGSII from UK has latest Androind 2.3.4?
Nothing I'm complaining about, its really stable and working OK.
But little sorrow there were updates for other CSC...
Btw, how to change CSC when multi-csc is not installed (*#727*IMEI# is displaying XEU only, is not accepting OXA)
--
Przem
prkrol said:
But little sorrow there were updates for other CSC...
CSC is not the update path .Product code is .
Btw, how to change CSC when multi-csc is not installed (*#727*IMEI# is displaying XEU only, is not accepting OXA)
--
Flash a CSC from the stock roms and CSC thread .
CSC IS country specific settings a few files that give local networks details and settings and is not even required for a phone to work .
jje
Click to expand...
Click to collapse
Hi Folks,
I have a question regarding debranding / updating my S3 (4.1.2)
This is all new to me and with the wealth of information here and elsewhere online I'm a little unsure about the correct files to use.
My S3 was originally on O2 Ireland and it has been unlocked so I can use it on Vodafone Ireland.
The phone is on 4.1.2 and Kies and OTA firmware update both state I have the latest firmware.
So now curiosity has gotten the better of me and I want to manually update to 4.3, and while I'm at it, I want to debrand and just have a stock firmware.
Reading online says the Switzerland firmware is stock and bloatware free.
These are the details...
PDA: I9300XXUGNA5
CSC: I9300AUTGNA1
MODEM: I9300XXUGMK6
If I flash with these, is that all I need to do to debrand and have the latest firmware?
There is a 4.3 Vodafone firmware on Sammobile so I suppose I could use that if the Swiss one didn't work.
As a noob to flashing, ROMS, Odin etc etc I appreciate any advide or guidance.
Thanks
Ciaran
No stock rom is debloated, they all have tons of Samsung rubbish included.
Any firmware for the i9300 will work, just make sure the included modem will work in your country. Usually anything European is fine but you may lose OTA due to wrong CSC.
Current phone details are...
AP : I9300XXELLA
CP : I9300XXELLA
CSC : I9300O2IELL1
Hoping for some more advice!
How do I know if the csc is correct?
This is the Vodafone Ireland file,
I9300XXUGNA5_I9300VFGGNB1_VDI
and the (more generic?) Swiss file,
I9300XXUGNA5_I9300AUTGNA1_AUT
I know the Swiss file won't have any branding, but don't know if the modem and csc settings are correct.
The Vodafone one on the otherhand will have the correct settings but lots of VF bloatware and branding.