Hello,
Ive a problem with displaying my tab over multiport on my tv screen. Im using a genuine samsung multiport to av adapter. No video no audio comes is displayed.
has anybody successfully conected this setup?
Related
I have a problem with the Tab HDMI adapter. All of a sudden, the tab does not connect to HDMI. I can hear the sound that the tab regognize the adapter and if I plug/unplug power, i can hear that sound too. But no output on the TV. Nothing has changed in my setup and it used to work.
Is there any setting in the tab that control the HDMI output?
I found the problem. The adapter does not work when the battery is below 50% even when it is plugged-in
Hi all,
I have the Note 2, it is not rooted and full stock. I purchased the Allshare Dongle and I did update the dongle firmware. I can get video over HDMI but no audio using media player or spotify. I tried 2 different HDMI cables. I tried going direct to TV and bypassing the HDMI receiver to which the TV is connected. I tried going to Accessory Settings and trying both Stereo and Surround.
Seems like this should be obvious but its not. I get audio from phone until I turn on allshare cast, and then I get no audio from the phone (as it should be because HDMI is then active) - but there is no HDMI audio.
I searched the Net but can't seem to find others with the problem. Thoughts?
Hi All,
I use an SIII to output wirelessly to my Miracast-enabled TV, through Allcast share.
I also have an old laptop, which doesn't have Miracast/WIDI hardware.
I would like to use the SIII as a Miracast transmitter dongle, to output the screen of my laptop to my TV, using the Miracast hardware of the SIII.
So far I have been able to do so by installing the Nomachine NX server on the laptop, the NX client on the SIII, establishing a connection and then activating Allcast.
It all works (audio and video), but it gets a bit laggy and stuttering when I try to stream videos from websites, as the CPU load on the laptop maxes out.
I was wondering if there's any more efficient way to do so, getting rid of some overhead and lag? Either through USB connection or WiFi?
Thanks in advance for any thought
Regards
I am interested in this topic too.
Is there a Wireless Display TRANSMITTER or TRANSCEIVER which can be plugged into the HDMI or USB port of any non-WiDi laptop so that the screen can be mirrored to my Miracast receiver device?
i've got a sony led tv and a samsung galaxy tab 3 and when i connect it to the tv they both understand that mhl is connected but nothing shows up on tv
the tablet gives a toast notifying that hdmi is connected and the tv writes "player 1" on top and "no signal" on the right bottom corner
is my cable faulty or should i do something for the image to show up?
Hello there,
I bought a USB-c to HDMI adapter today and tried to connect my Huawei P30 to the projector with it and a HDMI cable to watch Netflix.
The problem is the subtitle doesn't show on the projector screen but only on the mobile screen. Same issue when I try Disney +. I then tested with my iMac using the same adapter and cable and all worked well.
I searched here and someone mentioned to disable the hardware overlays in the developer options. I tried that and then yes the subtile worked on both screens however there's a new problem, the image itself disappeared on both screens, left only the sound and the subtitle.
Wondering if anyone can advise some other ways to solve this issue please?
TIA