Since i install de overclocking kernel.. My sgs2 it's heating up and the battery drain very fast.. I just update to litening 3.6.. And still the problem.. I want to install the stock overclock... How can i do it...
Did you tried Ultimate Kernel Cleaning Script to remove all treaks and overclocking?
http://forum.xda-developers.com/showthread.php?t=1363738
there isn't overclock or underclock kernel , only you who can overclock or underclock your cpu , just install any kernel with clean install , and don't use any app and it will run with it's default settings , and if you want to underclock just use setcpu or voltage control and underclock it or even undervolt it , this will help you in heating issue some how ,
but read the 1st page in any kernel thread before flashing any kernel , just to be sure about what you are flashing and what you will get and what you won't
OC/UV kernel doesn't impact on temperature. Well, maybe slightly. Even on stock kernel you will have warm phone (just turn on navigation or play GTA and you will see). Maybe try to flash Siyah Kernel (which is friendly to battery life)?
przemcio510 said:
OC/UV kernel doesn't impact on temperature. Well, maybe slightly. Even on stock kernel you will have warm phone (just turn on navigation or play GTA and you will see). Maybe try to flash Siyah Kernel (which is friendly to battery life)?
Click to expand...
Click to collapse
yes our s2 cpu is heating with normal-heavy use bec. of our powerfull dual core cpu and gpu in a very slim plastic case , but underclock , undervolt help in heating some extent , but sure it will heat but less than normal , i am using my phone at 100-800 mhz and uv my cpu by -125 ma and my phone temp is 39-40 max , before my cpu was about 45 while playing angry birds or browsing
You could try formatting both internal and external SD's. Sometimes different ROM's don't like changing of file structures etc.
EDIT: You can also download a CPU control app such as No Frills to check your clock speed. Our standard/stock speed is 1.2Ghz/1200Mhz.
You can also try to go to a stock firmware, you have several threads in this forums with links to download some.
Did you try 1st to use Antutu CPU or CPU master to check the over clocking and make the min to 200 MHz and the max 1200 MHz as this is the stock one
if you are having Siyah kernel it will be easy for you to change from the Extweeks.
juancho diaz said:
Since i install de overclocking kernel.. My sgs2 it's heating up and the battery drain very fast.. I just update to litening 3.6.. And still the problem.. I want to install the stock overclock... How can i do it...
Click to expand...
Click to collapse
Mostly Stock Kernel + Firmware + Guides can be found here:
http://forum.xda-developers.com/showthread.php?t=1640812
Here also:
http://forum.xda-developers.com/showthread.php?t=1075278
Still with heating problem.. I tried ultimate cleaner and flash again litening rom 3.6, and install no frills and setcpu but i don't know how to use it.. Here i let you 2 screenshots of no frills..
Hmmm, could you install CPU Spy, run it and continue as normal for 1-2 hours and post some sceenies please
This will show how often and for how long your cpu is sitting at each frequency step.
Related
Well currently I'm using MiniCm7 pro V21 rom and using stock kernel.
I go to setting>CM settings>Performance>CPU setting and ticked OverClock.
Whenever I try to overclock my phone over 600mhz,for example: I set the phone to overclock to 652mhz, return to home, and then I go to setting again, it revert back to 600mhz itself
Why is that? Is it because I'm using stock kernel?
Can't overclock in MiniCm7 v20 pro rom
I have the same problem, when i choose more than 600mhz, then it will ben chosen automaticly 600mhz, could anyone help us ?
i'm using cm7 v20
I had the same problem, I don't remember what I did but you can try maybe installing SetCPU? Or you can go bottom on Settings>...>CPU Settings and tick "Set on Boot", then turning off the decive just after that.
Just an advice, don't OC it to 748+, just leave it at 748. Why? Because, if more than that, my phone gets unstable and it reboots after a few minutes. Just happens to me, I don't know about others.
nico444164 said:
I had the same problem, I don't remember what I did but you can try maybe installing SetCPU? Or you can go bottom on Settings>...>CPU Settings and tick "Set on Boot", then turning off the decive just after that.
Just an advice, don't OC it to 748+, just leave it at 748. Why? Because, if more than that, my phone gets unstable and it reboots after a few minutes. Just happens to me, I don't know about others.
Click to expand...
Click to collapse
Thanks for your method, but both of it doesn't work. So.... any other ideas?
Jericho4869 said:
Well currently I'm using MiniCm7 pro V21 rom and using stock kernel.
I go to setting>CM settings>Performance>CPU setting and ticked OverClock.
Whenever I try to overclock my phone over 600mhz,for example: I set the phone to overclock to 652mhz, return to home, and then I go to setting again, it revert back to 600mhz itself
Why is that? Is it because I'm using stock kernel?
Click to expand...
Click to collapse
Hi, Jericho4869
I tried many custom roms. almost all version of MiniCM7pro too.
And I'm not sure about which version, but early versions of MiniCM7pro was I can over clocked.
But I can't over clock on after v15 of MiniCM7pro.
What's the differences between the both ?
So I got some idea, it's a modules, specifically differences of x8oc.ko and x10minioc.ko I think...
>x8oc.ko is a can over clock without problems but if not set over clock to make device to slow down and lag coming up.
(So when I was not use over clock, I did delete or rename x8oc.ko fot the save performances of device)
>x10minioc.ko is a difficult to over clock on some device but if not use over clock but no adverse effects to processing speed.
It's can not o.c setting to enable or over 710 mhz to get unstable or shutdown or freeze and restart, it has many cases on my U20i
Anyway, I can't over clock over 710 mhz on MiniCM7pro v21 and MiniCM'9'Pro v1.2 (based on MiniCM7pro v21) both too, because the both use x10minioc.ko for over clocking.
My opinion is: If you want to try over clocking, you should to be choose another roms with custom kernels !!
However now I'm using ZombiePanic kernel and I choosing custom roms conditional on it's supported custom kernels. Because no problems for testing o.c.
IMPORTANT NOTES: (I know, maybe you already to know)
If you want to try to over clock, please you don't try on main device !!
If in case of under 710 mhz but it is get a alot of load on cpu of your device.
keep on over clock in long time is a serious risk of failure to your device !!
its not possible to overclock in minicm7pro. u can if u flash simple kernel. it has inbuilt oc modules. so try it!
i am trying for some time now to find a thread or post to help me overclock my mini at about 748 mhz . tha result : i found nothing..
please if someone knows how to do that help me..
i am using the latest minicm7 2.1.6 for mini and latest E10_nAa-08_2.6.29.6-nAa-08
kernel..
What exactly is your problem?
first thanx for replying
then.. what you cannot understand??
i said that i would like to overclock my x10 mini (E10i)
up to 748 mhz and if its not possible (i think it is)
i would like at least to OC it at 729 mhz..
now.. when i try to OC it , it freezes !!
(every time and if the OC is at 729 mhz or more..)
the most i have achieved is 691 mhz
edit:
also i saw your video and you had 729 mhz
the first time you tried putting cyanogenmod at 729 mhz
didnt it freeze?
salvinluckys said:
first thanx for replying
then.. what you cannot understand??
i said that i would like to overclock my x10 mini (E10i)
up to 748 mhz and if its not possible (i think it is)
i would like at least to OC it at 729 mhz..
now.. when i try to OC it , it freezes !!
(every time and if the OC is at 729 mhz or more..)
the most i have achieved is 691 mhz
Click to expand...
Click to collapse
this is what I did to my u20i.
go to cwm. do full wipe.
using nAa + cm7 you can:
OC= interactiveX gov + 768+
OC= ondemand gov +748
minimum OC should be 200+ to run smooth.
You can try these three variants of solving problem.
1.Reflash the rom, wiping battery stats, dalvik cache and factory reset.
2.Before setting maximum cpu, set minimal cpu up to 480 Mhz. Also uncheck Undervolt and set Perfomance mode.
3.Install another rom (not the good opinion ^_^)
Hope it helps.
P.S. My phone is now running 806 Mhz =), that means, that you had a mistake while installing firmware
Mrakoris/ said:
You can try these three variants of solving problem.
1.Reflash the rom, wiping battery stats, dalvik cache and factory reset.
2.Before setting maximum cpu, set minimal cpu up to 480 Mhz. Also uncheck Undervolt and set Perfomance mode.
3.Install another rom (not the good opinion ^_^)
Hope it helps.
P.S. My phone is now running 806 Mhz =), that means, that you had a mistake while installing firmware
Click to expand...
Click to collapse
is it running smoothly at 806? how did you do it? can you share your settings?
Mrakoris/ said:
You can try these three variants of solving problem.
1.Reflash the rom, wiping battery stats, dalvik cache and factory reset.
2.Before setting maximum cpu, set minimal cpu up to 480 Mhz. Also uncheck Undervolt and set Perfomance mode.
3.Install another rom (not the good opinion ^_^)
Hope it helps.
P.S. My phone is now running 806 Mhz =), that means, that you had a mistake while installing firmware
Click to expand...
Click to collapse
Ok... i have tried all these except for the last (third) option..
Unfortunately i didnt achive to make it work..
Do you think the problem is that i have flashed naa - 08 kernel instead of the naa -07
that it says it requires??
Also i ve thought about overvolting..
if you have any idea post..plzzz
again i thank all of u for the help you provide!!
EDIT:
I was playing around with higher freqs and when i tested 806 mhz
It froze instantly and the red led light came up..
I think this is a clue..
When red flashlight comes- that means your phone will reboot now, because it is freezed. It is normal. Try to install another rom, maybe your currently running firmware is not fully compatible with your phone, because it is custom :/
Hope It Helps.
Mrakoris/ said:
When red flashlight comes- that means your phone will reboot now, because it is freezed. It is normal. Try to install another rom, maybe your currently running firmware is not fully compatible with your phone, because it is custom :/
Hope It Helps.
Click to expand...
Click to collapse
Firstly, my phones red led comes up only when using 806 mhz.
With any other frequency it just freezes and reboot..
i have also noticed that when i apply 729 mhz
it doesnt freeze instantly even if i am using performance governor but only when i do something (ex. Press the home button or back button )..
shall i ask something?
Will this happen to all minicm future releases??
Hi all, sorry to interrupt but i have u20i and my cpu is only stable upto 729mhz. i think it is not the kernel and the rom but the chip and processor they have added in the phone. it is a hardware matter.
so guys, whatever rom you install it is the same result. no change.
i have installed numerous roms and i have the same oc 729mhz max. not more than that.
so stop fighting with how to get it to 800+mhz.
Thanks!
Tommylee567 said:
Hi all, sorry to interrupt but i have u20i and my cpu is only stable upto 729mhz. i think it is not the kernel and the rom but the chip and processor they have added in the phone. it is a hardware matter.
so guys, whatever rom you install it is the same result. no change.
i have installed numerous roms and i have the same oc 729mhz max. not more than that.
so stop fighting with how to get it to 800+mhz.
Thanks!
Click to expand...
Click to collapse
Are you trying to tell me that it will never work at such speeds (Over 691) ???
Thats a pity for such a good smartphone
yEAH he is right. its all about the chip you have some processor can go upto 800 Mhz and some remain only on lower frequencies even i remain on 691Mhz. We cant do nothing about it
@salvinluckys,
Yes, if you want a 800mhz phone then you have to have a luck to get one like you want.
It is hardware matter. you might consider looking at the scores after you do benchmarking, you will find some 800+ mhz doing just little near or above 2000 score. it doesnt matter if you have the highest score, all matters if your phone is capable to do whatever you need to do. that is what i am looking at.
Good day!
EDIT: Even people with the same frequency have 1800 (something) score. Dont feel bad about your phone. It is a good phone. and we are lucky to have awesome devs giving roms for us.
Thanks to all of you for helping me understand that its a hardware incapability..
Last question..
will this persist even if i overvolt and then OC my device?
(I dont know the way yet .. if you want to help me)
salvinluckys said:
overvolt and then OC
Click to expand...
Click to collapse
???
How is that?
Better you get a PC and try that. it is better so you will forget to do it for your phone
NEWS
Guys.. i have some news !!!
with the latest update of minicm 2.1.9 ( naa 11 kernel )
on 729 mhz my device is partially stable.. i will reboot either with hard use or
after a day or so..
NOW the big part..
while i was playing around with benchmarking ( antutu ) at 729 mhz i saw that the device was freezing only during the read or write test of my SD card which is 8 gb
and splitted in 3 partitions [ fat32 , ext4 ( or ext3 i dont remember ), swap ].
what do you believe??
is there a chance that the problem with overclocking has to do with the SD card??
(748 mhz still reboots after a few clicks on the screen depending on the governor)
salvinluckys said:
Guys.. i have some news !!!
with the latest update of minicm 2.1.9 ( naa 11 kernel )
on 729 mhz my device is partially stable.. i will reboot either with hard use or
after a day or so..
NOW the big part..
while i was playing around with benchmarking ( antutu ) at 729 mhz i saw that the device was freezing only during the read or write test of my SD card which is 8 gb
and splitted in 3 partitions [ fat32 , ext4 ( or ext3 i dont remember ), swap ].
what do you believe??
is there a chance that the problem with overclocking has to do with the SD card??
(748 mhz still reboots after a few clicks on the screen depending on the governor)
Click to expand...
Click to collapse
sorry but i really think it has nothing to do with sd card but a hardware limitation as u were told before... im in ur same situation... my x10mini cant oc over 691... its as simple as some phones can, others not, maybe depending on the date it was made... but dont worry!! ive been using it with 691 since last update and runs btilliant
I can go up to 825mhz without problem i have an x10 mini (E10i) with minicm7 2.1.9 and nAa's 11 kernel, thank you very much
I could oc it to 787 mhz,it is mostly stable.
Each device is different, not every device is capable of overclocking above 691. The most stable all over those devices is 691. No more! I am stable ta 748 with nAa.
My SGA is on GB 2.3.6 (Russian ROM) and I have installed No-Frills CPU, but I am not able to use it to full potential. The Developer says I need some custom Kernels for this.
Which Kernels are these? Is it ok to use diff kernels?
what do u mean by "full potential"?
afaik for changing cpu scaling freq, cpu governor or changing disk io scheduler, u can do it even on stock kernel. maybe the selection is a little bit less, but it'll definitely works.
i dont know if cpufrills can also change cpu voltage, even so we dont have any kernel that support cpu voltage changing yet.
You might have seen No-Frills cpu, but few users are getting more governors than me using some diff kernel.
anyways, I want some other way, so that my cpu cuts down frequency really down when phone is locked, and jump up accoring to requirement. (Just like Cool'n quiet in AMD)
then u might wanna install cfroot kernel. it contain smartassv2 and interactiveX that do have automatic cpu down scaling when screen off.
but u can also set up profile to do it manually on other governors using setcpu.
What about the kernel by squadzone supposedly optimised for gingercruzt but it works for cm7 and has 6 IO schedulers, but cf-root is best for stock
Sent from my GT-S5830 using xda premium
My phone is already rooted and got busybox. So if I use cfroot, what would the affect on previous root and busybox? How do I backup current kernel if I need to go back.
animal_he said:
My phone is already rooted and got busybox. So if I use cfroot, what would the affect on previous root and busybox? How do I backup current kernel if I need to go back.
Click to expand...
Click to collapse
no, it wont affect root as it also give root.
and just use clockworkmod recovery to create backup of ur whole rom. and if u just wanna restore kernel use the advance restore to restore just the kernel itself
an0nym0us_ said:
then u might wanna install cfroot kernel. it contain smartassv2 and interactiveX that do have automatic cpu down scaling when screen off.
but u can also set up profile to do it manually on other governors using setcpu.
Click to expand...
Click to collapse
Hey, I'm using ICS Final and I only have the InteractiveX and normal Interactive options but not the smartassV2. Where can I get it? I'm using the Smartass governor out of all of them. What is the difference between the two? (V1 & V2)
Thanx a lot for all the info mate. Can u just help me find one appropriate for my phone?
Version 2.3.6
Build number .XXKPP
SuperAce609 said:
Hey, I'm using ICS Final and I only have the InteractiveX and normal Interactive options but not the smartassV2. Where can I get it? I'm using the Smartass governor out of all of them. What is the difference between the two? (V1 & V2)
Click to expand...
Click to collapse
Install zImage-Mod v1.0 (you can find it in the Development Section).
As the title says, which is the best combo rom (gingerbread roms only, I don't like ICS!) + kernel is the most battery friendly? (I'm on XM)
Now I'm on CM 7.2 with rage kernel but I' ve thought about flush 6.5
Thanks everybody!
Which phone?
From what I have heard, Spartan and Hybrom seem to be most battery-friendly GB ROMs, but I occured some bugs on Spartan and currently using stock system at all.
Someguyfromhell said:
Which phone?
From what I have heard, Spartan and Hybrom seem to be most battery-friendly GB ROMs, but I occured some bugs on Spartan and currently using stock system at all.
Click to expand...
Click to collapse
I don't like hybrom So is the stock a good choice too?
Hi, you should try NeroDroid with X kernel, I tried it and liked it a lot, but Im waiting for universal V2
Il Giulione said:
I don't like hybrom So is the stock a good choice too?
Click to expand...
Click to collapse
Yea, stock is also great, if you root it and customize as much as you want.
Someguyfromhell said:
Yea, stock is also great, if you root it and customize as much as you want.
Click to expand...
Click to collapse
Yup, if you don't wanna be dealing with bugs or stuff like that stick with stock like hes says
The only thing I didn't like about my stock is that battery didn't last long
Now I've flashed flush 6.5 ... I' ll say to you how it is about battery and performance
PS This is my girlfriend's phone, mine is the O1 so I can't understand what ''stock'' means
Il Giulione said:
Now I've flashed flush 6.5 ... I' ll say to you how it is about battery and performance
PS This is my girlfriend's phone, mine is the O1 so I can't understand what ''stock'' means
Click to expand...
Click to collapse
Test and report results...
Stock is basically what came with the phone.
Untouched ROM.
Tried all ROMS available for Xperia Mini with all possible kernels.
I think the best combination for Batter life is
NeroDroid Rom with X Kernel.
Set these frequencies
Min 134Mhz
Max 1.0 Ghz.
Smartassv2 Governor
I/O Schedulers - deadline
You are already the second who says to me to try nerodroid and x kernel...so...I'm doing it
Flush sucks, gps doesn't work and the developer doesn't want believe me
singh_dd93 said:
Tried all ROMS available for Xperia Mini with all possible kernels.
I think the best combination for Batter life is
NeroDroid Rom with X Kernel.
Set these frequencies
Min 134Mhz
Max 1.0 Ghz.
Smartassv2 Governor
I/O Schedulers - deadline
Click to expand...
Click to collapse
but X kernel do reboot my phone... mini pro, i dont know why!!! since tha day i installed it.
I use Clean 'n' Tweaked - 4.0.2.A.0.69 - v4.1 with X kernel 2.6.32.59
Don't forget to flash the apropriate x-kernel wlan module AFTER installing the target ROM in CWM.
Standby battery drain is around 1% every 3h without 3G. I use SetCPU to switch CPU frequencies and Governor when the display goes off:
Display on: CPU: 249 - 1017 Governor: smartassV2
Display off: CPU: 134 - 364 Governor: ondemand
This way i have great performace when i operate the Phone and low power consumption when using it as mp3 player.
Haltlos said:
I use Clean 'n' Tweaked - 4.0.2.A.0.69 - v4.1 with X kernel 2.6.32.59
Don't forget to flash the apropriate x-kernel wlan module AFTER installing the target ROM in CWM.
Standby battery drain is around 1% every 3h without 3G. I use SetCPU to switch CPU frequencies and Governor when the display goes off:
Display on: CPU: 249 - 1017 Governor: smartassV2
Display off: CPU: 134 - 364 Governor: ondemand
This way i have great performace when i operate the Phone and low power consumption when using it as mp3 player.
Click to expand...
Click to collapse
i dont know why my phone reboots with X kernel... but ok with Rage Kernel!!! just dat X kernel battery is good!
whalesplaho said:
i dont know why my phone reboots with X kernel... but ok with Rage Kernel!!! just dat X kernel battery is good!
Click to expand...
Click to collapse
did you try flashing stock and then X kernel.
Check X kernel with stock and report
singh_dd93 said:
did you try flashing stock and then X kernel.
Check X kernel with stock and report
Click to expand...
Click to collapse
i wipe data/factory reset... den flash kernel & after flash kernel!!!
whalesplaho said:
i wipe data/factory reset... den flash kernel & after flash kernel!!!
Click to expand...
Click to collapse
You don't have to wipe data before flashing kernel. Not needed at all.
Sent from my Xperia Live using xda premium.
Someguyfromhell said:
You don't have to wipe data before flashing kernel. Not needed at all.
Sent from my Xperia Live using xda premium.
Click to expand...
Click to collapse
i did dat cos i was told to flash stock & i thought doing dat ll return my phone to stock!
I'm using Rage 2.8 on Spartan ROM 2.0
134Mhz-1Ghz smartassv2 or brazilianwax
Scheduler is SIO
I've used Xkernel before Rage 2.8 came out, because I felt it was more batt friendly. But with v2.8 I think that Rage is way better. Battery life is great!
Especially with Spartan ROM since it comes with minimal app load, and is tweaked and fast as hell
I never flashed my kernel before with my previous phone (htc desire).
It seems more important for these xperia phones, is this correct? I 'm currently the owner of a Mini Pro.
swimon said:
I never flashed my kernel before with my previous phone (htc desire).
It seems more important for these xperia phones, is this correct? I 'm currently the owner of a Mini Pro.
Click to expand...
Click to collapse
Some custom roms require custom kernels, that's why they are needed sometimes, or you can use em on stock rom to increase performance, battery life, to have recovery installed, etc...
Hello. sorry if it has been already posted, but I want only "up-to-date" answers.
I have some questions:
1. Which is the best governor to use ( for this kernel ) for a balance between battery and performance ( I use lulzactive right now, I heard that it's very good for a balance between those two but it seems like ondemand is doing a lot better when it comes to battery life )
2. I don't mind OC'ing the CPU but the GPU yes. I want to play games such as Real Racing 3 with acceptable FPS, so I need a boost for the GPU. What settings to use here?
Thanks.
Ondemand and row.
Don't know what governor does Siyah have,but you need to try out "cfq" scheduler with "slp" governor.I think only Apolo kernel has that.
what do you mean by 'row' ?
@GamingDj siyah kernel governors:
ondemand
pegasusq
lulzactive
lulzactiveq
conservative
Scheduler row
Gov ondemand
Andrew is right...from these Row with ondemand is the best.Are you on Stock ROM 4.1.2? If so,then I recommend you trying out Apolo.Maybe extreme v0 or Regular.
Thanks.
I may try thoses ROM but I enjoy the stock ROM, I would change it just for better performance in gaming ( and as I know, the ROM's aren't for that )
edit: oops Apolo is a kernel.. well, as I know, the Siyah Kernel is the best for this phone, isn't it?
but still: no overclock settings for the GPU?
burningcow said:
Thanks.
I may try thoses ROM but I enjoy the stock ROM, I would change it just for better performance in gaming ( and as I know, the ROM's aren't for that )
edit: oops Apolo is a kernel.. well, as I know, the Siyah Kernel is the best for this phone, isn't it?
but still: no overclock settings for the GPU?
Click to expand...
Click to collapse
I think dorimanx is the best. It's siyah based and updated alot by a cracking dev
i may give it a try. let's hope it's better.
If you like stock then you should try out alliance or biftor ect ect. These are custom stock roms that work lovely and if you mix it up with a little dorimanx you end up with a kick ass phone. Not to put down Apollo kernel as that is really good for battery but Dori is better for tuning cpu/gpu ov/uv.
burningcow said:
Thanks.
I may try thoses ROM but I enjoy the stock ROM, I would change it just for better performance in gaming ( and as I know, the ROM's aren't for that )
edit: oops Apolo is a kernel.. well, as I know, the Siyah Kernel is the best for this phone, isn't it?
but still: no overclock settings for the GPU?
Click to expand...
Click to collapse
With siyah kernel flashed in ur phone u get an app called extweaks or stweaks. This app too was developed by gokhan moral. U can go to GPU tab and change the GPU frequency step. Be careful and don't go beyond 400mhz. It may heat up your phone very much. I use this settings for increasing the smoothness of the phone. And one more thing. Gradually increase the steps.Don't keep the 1st step as 300 or 400. I recommend 160 or 200.
andrewwright said:
If you like stock then you should try out alliance or biftor ect ect. These are custom stock roms that work lovely and if you mix it up with a little dorimanx you end up with a kick ass phone. Not to put down Apollo kernel as that is really good for battery but Dori is better for tuning cpu/gpu ov/uv.
Click to expand...
Click to collapse
hmm.. i really want to try dorimanx, but, can i flash it over the siyah or i have to somehow delete siyah first?
is the stock ROM that bad? i see that you insist changing it.. as i said: i would change the ROM only if it has performance improvements ( in games, because the stock ROM is doing pretty good in others ) but as I know ROM's aren't for gaming.
@santhosh502 i know it's all about the frequencies. but i need all of the steps. not just the first one. what are you using?
Nope just flash it
andrewwright said:
Nope just flash it
Click to expand...
Click to collapse
okay, thanks, what settings do you recommend for this kernel?
On demand and row
andrewwright said:
On demand and row
Click to expand...
Click to collapse
thanks again. i will try it, let's hope it's better than Siyah.
Just remember that siyah is for stock and not cm/aokp roms. Dorimanx is for both. 8.xx is stock and custom and 9.xx is for custom only.
I use siyah kernel. But u can download stweaks in play store too. The link for steps is here. Be careful as ur hands might get burned. http://forum.xda-developers.com/showthread.php?t=1657491
I understand that you can use siyah with cm/aokp but not supported by dev. Dorimanx is a much safer bet for stability
andrewwright said:
I understand that you can use siyah with cm/aokp but not supported by dev. Dorimanx is a much safer bet for stability
Click to expand...
Click to collapse
Is it true that I can't run Dorinmanx 9.xx on stock ROM?
And.. what do you think about CM ROM? Is it worth trying?