Hi Guys!
I had root my Xperia Mini Pro and instal CWM.
I'am on GB.
When i instal a ROM, Real ICS or Real ICS lite, i can see only sony ericsson logo.
I waiting during 15min, and nothing has change.
Now I unlock bootloader , but i always see only sony ericsson logo, when i start the phone after rom installing.
What can I do?
I never had there problems with my old x10.
PS: "From the downloads section, download kernel installation package and extract the folder."
Where is this section? Where can i download kernel instalation package? (http://forum.xda-developers.com/showpost.php?p=27376017&postcount=2)
I'am sorry for my very bad english.
every rom has its specified kernel
For stock based ICS Roms you can flash
Rage Kernel(v3.2)
Krsh Kernel
Mesa kernel
for CM 9.0 flash the kernel included the zip file by FXP
there are some kernels for GB roms as well you can search them
So, if i want to instal RealICS rom, i must instal first the rom and next i instal specified kernel with fastboot, yes?
Beacuse RealICS dont work with stock kernel.
PS: If i flash Krsh kernel and next i instal a stock rom with flashtool, Krsh kernel is remplaced for stock kernel?
First kernel, then rom.
And, make sure u have unlocked bootloader to install custom kernel.
Or, u can use rom which based on official ics. Like expeacer rom.
Sent from my Nokia 3310
Hmm, it is complicated ; o
I'm sure, my bootloader is unlocked. I check in system info.
I'am on Stock GB , rooted with CWM and unlocked bootloader.
And now i want to instal RealICS. I have to instal Krsh kernel for ICS, but i have GB. How i do? First i have to instal Rooted ICS ? And later i instal Krsh kernel for ICS and I instal RealICS rom?
Or can i instal RealICS with rooted GB?
I'am lost ; |
D'oh. They already gave the answer yet u still ask the same question again.
U need to read, lots and lots of reading.
- turn off the phone
- boot to fastboot and flash ICS kernel
- when booting up ..enter cwm
- flash rom
- reboot
an0nym0us_ , that's right i have to read a lot. Beacuse i not understend a lot of words.
And i want to be sure for the instalation, beacuse i try a lot of times, and i had always sony logo.
Thanks for all the anwers ; )
Now i go to instal the rom.
I follow caer_ayu's tuto.
do a full wipe
and
format system (optional)
before flashing new roms
good luck m8
My guess is u didn't do wipe data in recovery before flashing the rom, hence the stuck at boot.
Good luck.
First things look complicated. Once you understood the basics all is much easier.
Most custom roms need custom kernels. Custom kernels can only flashed with unlocked bootloader.
Gesendet von meinem WT19i mit Tapatalk 2
I did all wipes and formats. But with the stock kernel , RealICS dosen't work.
But now, i had follow caer_ayu's mini tuto and that's work!
Thanks for you all, for all anwers! THANKS!
I was confused with kernel instalation, now all is ok.
Thanks one again!
And sorry for my bad english.
exiProx said:
I did all wipes and formats. But with the stock kernel , RealICS dosen't work.
But now, i had follow caer_ayu's mini tuto and that's work!
Thanks for you all, for all anwers! THANKS!
I was confused with kernel instalation, now all is ok.
Thanks one again!
And sorry for my bad english.
Click to expand...
Click to collapse
Good luck man, and beside learning to flashing, learn also to click thanks button. Easier than texting . For those who helped u.
Sent from my Nokia 3310
Related
Hi, i'm new to this, and i need a bit of your expertise.
Right now i have MiniCM7 2.1.7 last update from original poster : nobodyatall
And nAa kernel
What i have to do to change for another rom ? like Paul-xxx's rom ?
I have to wipe data/factory reset and then install like the first one i did, will wi fi work with paul's room ?
I want to change room because this one uses a lot of battery, even all day basically idling.
I turned it on 7:30 AM and now it's 17:43 and there's only 54% left ...
Thank you
RayneRz said:
Hi, i'm new to this, and i need a bit of your expertise.
Right now i have MiniCM7 2.1.7 last update from original poster : nobodyatall
And nAa kernel
What i have to do to change for another rom ? like Paul-xxx's rom ?
I have to wipe data/factory reset and then install like the first one i did, will wi fi work with paul's room ?
I want to change room because this one uses a lot of battery, even all day basically idling.
I turned it on 7:30 AM and now it's 17:43 and there's only 54% left ...
Thank you
Click to expand...
Click to collapse
If u want to switch to another ROM follow these steps
1) download the *.zip (the ROM zip)
2) go into the recovery n flash it..
3)make a cache wipe n also a factory reset..
4)reboot ur from recovery
Ur done..
N wifi workin in paul-xxx's ROM depends on the ROM which it is check the details on resp thread.. (actually for paul-xxx's ROM's wifi is working except ICS as its in development..) happy flashin.. ;-)
thanks, i'm a bit confused about kernels and CWM , because:
When i installed the nAa kernel this " CWM " comes along with it and then i see this on the paul's thread :
Only 2.1.1.A.0.6 SE firmware
So, if i put back the original Kernel, i won't be able to use the CWM and therefore i won't be able to flash the paul's rom, and probably will have a bricked phone, because the rom that is on the phone is not compatible with SE original kernel ..
Am i thinking right here ?
Thanks a milion
RayneRz said:
thanks, i'm a bit confused about kernels and CWM , because:
When i installed the nAa kernel this " CWM " comes along with it and then i see this on the paul's thread :
Only 2.1.1.A.0.6 SE firmware
So, if i put back the original Kernel, i won't be able to use the CWM and therefore i won't be able to flash the paul's rom, and probably will have a bricked phone, because the rom that is on the phone is not compatible with SE original kernel ..
Am i thinking right here ?
Thanks a milion
Click to expand...
Click to collapse
U made me confused for a sec.. lol neways.. Its the 2.1.1.A.0.6 SE firmware not the kernel.. So what u can do is .. switch to the ROM (it will have its recovery) then flash a new kernel if u want (as for nAa kernel, any other ROM than his will not work with phone vibration(if not inbuild) n few feature.. So with other ROMs go with other kerneles like zp kernel, Fa kernel or which u like.. So first change the ROM then the kernel ul go good..
I'm still confused because it says this :
If you not 2.1.1.A.0.6, you need to flash FTF file via FlashTool.
PS: hacked bootloader is not needed. This kernel official. This kernel, it returns the firmware on 2.1.1.A.0.6
" this kernel official "
So what happens if i flash the stock kernel, and then the CWM goes away ? I can't then flash the paul's rom and the phone will not enter the OS because the OS i use does not suite for SE original kernel ...
ps. sorry for being such a noob and *****, but i just don't want to brick it.
I have SE stock rom 2.1 update 1 with stock kernel on my x10i mini. I have rooted my device and I want to know if I can enable multitouch on my phone. Please someone help me .
Thanks in advance...
I didnt try only kernel,but I try custom MINICM7-2.2.0 based on GB 2.3.7 and it is like new phone reBORN, fast&stable.
Sort off, yes
Check this
For stock kernel
The links are dead.. Downloading of x8gesture.ko not working.
SmG67 said:
Sort off, yes
Check this
For stock kernel
Click to expand...
Click to collapse
downloading not working of x8gesture.ko
In that case, there are a few froyo-based roms (srom-froyo, froyobread) that include this particular module, don't know if those links are still working, try to search the x10mini development forum to find them
SmG67 said:
In that case, there are a few froyo-based roms (srom-froyo, froyobread) that include this particular module, don't know if those links are still working, try to search the x10mini development forum to find them
Click to expand...
Click to collapse
Do they require unlocking of bootloader .Actually I am afraid of this purpose.Is there any GB rom that can be flashed without unlocking bootloader on stock kernel 2.6.29 Thanks for Help.
You only need to unlock your bootloader if you need a custom kernel.
All the froyo roms run on the stock kernel, so they can be installed without unlocking the bootloader.
GB roms all run on a custom kernel (on the x10Mini), so you need to unlock the bootloader for that.
If you get S1Tool and post the output, i could probably provide you with some guidance on the safety of unlocking
SmG67 said:
You only need to unlock your bootloader if you need a custom kernel.
All the froyo roms run on the stock kernel, so they can be installed without unlocking the bootloader.
GB roms all run on a custom kernel (on the x10Mini), so you need to unlock the bootloader for that.
If you get S1Tool and post the output, i could probably provide you with some guidance on the safety of unlocking
Click to expand...
Click to collapse
Yeah !! in the output It shows SEMC something with capital R . Actually date is 10w29. Flashtool is big file and I have a slow connection... Smthng else for unlocking bootloader
it should say semc-simlock certificate, and 10w29 is ok too. you can get the manual scripts for unlocking the bootloader in a slightly smaller package, but the point about unlocking the bootloader is to install a custom kernel... you will need flashtool for that... lol.
I would say, try one of the froyo roms if they're still available, i'm pretty sure froyobread with the hotfix can be downloaded and they can be installed on the stock kernel. but then, those are big downloads too on a slow connection
SmG67 said:
it should say semc-simlock certificate, and 10w29 is ok too. you can get the manual scripts for unlocking the bootloader in a slightly smaller package, but the point about unlocking the bootloader is to install a custom kernel... you will need flashtool for that... lol.
I would say, try one of the froyo roms if they're still available, i'm pretty sure froyobread with the hotfix can be downloaded and they can be installed on the stock kernel. but then, those are big downloads too on a slow connection
Click to expand...
Click to collapse
Ok I am starting... Given 30 minutes to my wintage phone,
Thanks for paying attantion..
yupp its done ..XDA rocks B-)
You're welcome
Array. I've unlocked the bootloader and I have xrecovery on my phone. I also have put GB miniCM rom as update.zip on SD card
Now the problem is on GB thread it said that I should have naA kernel on my phone and on naA kernel thread it said that I should have GB custom rom. I have only unlocked the bootloader and still on stock rom and stock kernel.,
once again its ur turn to sort me out of this problem...
:-D
First you flash the nAa kernel using flashtool
Then flash the rom through cwm
Sent from my E10i using xda premium
Bro I have gone one step ahead and have installed cloclwordmod .. now I am flashing the naA kernel... But what after flashing the kernel if I start my phone do I have to first enter in CWM and flash new minicm7 rom or I can use this kernel on my stock rom 2.1
Go into CWM and install MiniCM, stock will not boot on the nAa kernel.
SmG67 said:
Go into CWM and install MiniCM, stock will not boot on the nAa kernel.
Click to expand...
Click to collapse
Done ;-)
hi all,
i am very big trouble.....
i had stock rom installed on my x10i.....after reading a lot about ThGo2 v17.0 rom i decided to install it (not the first rom i installed).....
after following all the steps i.e
1. flashing the th_kernel provided
2. booting to xrecovery and installing the custom rom provided and addons....
the phone did start but was very laggy so i decided to shift to stock kernel and flashed it using flashtool but the flashtool got stuck at 2% and said aborting flash...
so i disconnected the phone and now i am not able to flash any firmware or kernel
plz help as soons as possible
update...
just found out that thGo2 rom made my device xperia arc aka i was in the about phone setting in my rom and found that the phone is not listed as x10i as it should be... it is listed as s0-01c aka xperia arc
rohit25 said:
hi all,
i am very big trouble.....
i had stock rom installed on my x10i.....after reading a lot about ThGo2 v17.0 rom i decided to install it (not the first rom i installed).....
after following all the steps i.e
1. flashing the th_kernel provided
2. booting to xrecovery and installing the custom rom provided and addons....
the phone did start but was very laggy so i decided to shift to stock kernel and flashed it using flashtool but the flashtool got stuck at 2% and said aborting flash...
so i disconnected the phone and now i am not able to flash any firmware or kernel
plz help as soons as possible
Click to expand...
Click to collapse
Cant you enter into flashmode????
Question
Need More details:
1)Locked or Unlocked Bootloader?
2)Which stock kernel you flashed? Downloaded from?
3)[If Locked Bootloader] Can you enter xrecovery? If can, make full wipe, clear cache partition, install new ROM via "install custom zip from SDcard.
4)[If Unlocked Bootloader] Try flash some custom Kernel for Unlocked bootloader like DooMKernel, see whether it reach recovery mode or not.
Sincerely,
whitefang
If can, pls kindly hit thanks button as an appreciation
YES
THeLogiC said:
Cant you enter into flashmode????
Click to expand...
Click to collapse
yes i can enter the flashmode but as i connect the phone via the usb cable the flashtool displays
flashing started
flashing ending
ERROR
not a noob
whitefang3456 said:
Need More details:
1)Locked or Unlocked Bootloader?
2)Which stock kernel you flashed? Downloaded from?
3)[If Locked Bootloader] Can you enter xrecovery? If can, make full wipe, clear cache partition, install new ROM via "install custom zip from SDcard.
4)[If Unlocked Bootloader] Try flash some custom Kernel for Unlocked bootloader like DooMKernel, see whether it reach recovery mode or not.
Sincerely,
whitefang
If can, pls kindly hit thanks button as an appreciation
Click to expand...
Click to collapse
the bootloader is unlocked
the kernel flashed was X10_2.3.3_Th_kernel-n1.1-BootManager-v2.0
the rom installed was ThGo2 v17
no i am not able to flash to any other kernel.... but i am able to enter flashmode
it says error in flashtool
THE ROM MADE MY PHONE PHONE SO-01C AS THE MODEL NUMBER IN SETTINGS ABOUT PHONE....
so i am getting forece close when try repairing my phone using seus
Download 2.3.3 stock firmware and flash it through flashtool
Sent from my X10i
didnt work
THeLogiC said:
Download 2.3.3 stock firmware and flash it through flashtool
Sent from my X10i
Click to expand...
Click to collapse
i already did that have a repository of all the roms and kernel on my hdd.....didnt work though
so went to the blog and updated my kernel from thjap.org... turns out every1 was compalining of the rom being laggy and the kernel used was older version so updated it and then came back to FXP125.....
the BEST rom out there :victory:
anyway a BIG THANKS 2 ALL
rohit25 said:
i already did that have a repository of all the roms and kernel on my hdd.....didnt work though
so went to the blog and updated my kernel from thjap.org... turns out every1 was compalining of the rom being laggy and the kernel used was older version so updated it and then came back to FXP125.....
the BEST rom out there :victory:
anyway a BIG THANKS 2 ALL
Click to expand...
Click to collapse
yes cm7.2 is great
Hey guys,I own optimus one and I m used to rooting and stuff but my brother owns xperia mini pro so I need to install cyanogenmod (9 or10) whichever is stable.I had gone through various guides and stickies yet I want to be dead sure that I don't mess up my brothers handset. Its kinda new coz bootloader needs to be unlocked and also kernel image needed to be flashed separately unlike in optimus one.
Now I want help of you guys in the following manner like:-
1. My brothers mini pro is on ICS 4.1.B.0.587 and the rooting tutorial provided here for the said firmware
http://talk.sonymobile.com/thread/41119?start=0&tstart=0 is not clear to me coz it says that first I need to install some kernel [only mini mentioned here] then next I need to flash another kernel according to firmware. Can someone explain what is being done in this and why rooting is so complicated in this.
2. Certain ROM's say that you need to flash kernel first using flashtool
My query is that all ROM's that I flashed till now on optimus one included kernel and I only needed to flash ROM zip through cwm.. So do I need to flash kernel everytime I flash ROM!! and isn't there flashable zip for kernel too!!
3. FXP ROM's do not contain things like what's working and what's not, it only has issue tracker so it become difficult for new comer to know the bugs in ROM. Can anyone tell me the least bugs cm9 & cm10 ROM and what are the bugs present.
4. Lastly, should I proceed like this!!
i. Root device (though method isn't clear to me)
ii. unlock bootloader
iii. install cwm (I guess I can do this using flashtool)
iv. backup current ROM along with kernel (for future use,I know its optional)
v. flash kernel using flashtool
vi. flash ROM through cwm.
I m a quick learner and I just need some guidance on this new device (double checking coz its my bro's device) . Looking forward for support. Thanks
fundoozzz said:
Hey guys,I own optimus one and I m used to rooting and stuff but my brother owns xperia mini pro so I need to install cyanogenmod (9 or10) whichever is stable.I had gone through various guides and stickies yet I want to be dead sure that I don't mess up my brothers handset. Its kinda new coz bootloader needs to be unlocked and also kernel image needed to be flashed separately unlike in optimus one.
Now I want help of you guys in the following manner like:-
1. My brothers mini pro is on ICS 4.1.B.0.587 and the rooting tutorial provided here for the said firmware
http://talk.sonymobile.com/thread/41119?start=0&tstart=0 is not clear to me coz it says that first I need to install some kernel [only mini mentioned here] then next I need to flash another kernel according to firmware. Can someone explain what is being done in this and why rooting is so complicated in this.
2. Certain ROM's say that you need to flash kernel first using flashtool
My query is that all ROM's that I flashed till now on optimus one included kernel and I only needed to flash ROM zip through cwm.. So do I need to flash kernel everytime I flash ROM!! and isn't there flashable zip for kernel too!!
3. FXP ROM's do not contain things like what's working and what's not, it only has issue tracker so it become difficult for new comer to know the bugs in ROM. Can anyone tell me the least bugs cm9 & cm10 ROM and what are the bugs present.
4. Lastly, should I proceed like this!!
i. Root device (though method isn't clear to me)
ii. unlock bootloader
iii. install cwm (I guess I can do this using flashtool)
iv. backup current ROM along with kernel (for future use,I know its optional)
v. flash kernel using flashtool
vi. flash ROM through cwm.
I m a quick learner and I just need some guidance on this new device (double checking coz its my bro's device) . Looking forward for support. Thanks
Click to expand...
Click to collapse
You needn't root first if you want to unlock bl, just unlock bl and flash a custom kernel (in most custom kernels cwm is included).
Backup your rom and install the rom...
hmmm....
1. Unlock Bootloader........
2. Flash Custom Kernel (all custom kernel is per-rooted and have CWM).......
3. Boot into CWM and Flash CM9 or CM10 (factory format/wipe dalvik/cache).....
4. Boot into Fastboot And Flash FXP kernel for CM9 or CM10.....
xperia phones aren't like sammy, lg or htc where recovery is a separate partition from kernel. in fact, by default xperia phones doesn't even have "stock recovery" like on other phone. by that we integrate cwm in kernel ramdisk.
and to answer the question:
1- flash custom kernel mean't for your phone only, never ever flash kernel intended for other phone. and its done via fastboot and should be flashed before flashing rom.
2- like i said u can't compare xperia phone with other phone like sammy etc, its different. kernel must be flash via fastboot.
3- for cm10, bugs that i notice is slow accelerator, but fixable with some text editing, and non working front camera for lww and minipro.
4- should be like this, according to order:
- unlock bootloader.
- flash kernel via fastboot.
- boot into cwm.
- backup rom if u want.
- wipe data, cache and dalvik cache. don't wipe system partition or u will get error when flashing rom later.
- flash rom, and gapps if its cm/aokp/pa rom.
- profit :good:
thank you guys.... this made me clear...
one last thing :- which kernel should I flash on stock 4.1.B.0.587 which is pre rooted and have cwm after unlocking bootloader.I mean the one compatible with above firmware and also do I need to do anything with baseband or will it be compatible. After this m ready to enter the custom xperia world
Remember to backup your stock rom before unlocking the bootloader as everything will be wiped clear.
Sent from a mango
andogeek10 said:
Remember to backup your stock rom before unlocking the bootloader as everything will be wiped clear.
Sent from a mango
Click to expand...
Click to collapse
wont I be able to backup after flashing custom kernel and unlocking bootloader..I guess I can.. correct me if I m wrong
fundoozzz said:
how will cwm be installed without unlocking??
Click to expand...
Click to collapse
No, i just meant that backup up your contacts, messages, apps (can be done through astro file manager) etc, before unlocking your bootloader because unlocking will wipe your data.
Sent from a mango
andogeek10 said:
No, i just meant that backup up your contacts, messages, apps (can be done through astro file manager) etc, before unlocking your bootloader because unlocking will wipe your data.
Sent from a mango
Click to expand...
Click to collapse
yup that I know... thanks anyways
fundoozzz said:
thank you guys.... this made me clear...
one last thing :- which kernel should I flash on stock 4.1.B.0.587 which is pre rooted and have cwm after unlocking bootloader.I mean the one compatible with above firmware and also do I need to do anything with baseband or will it be compatible. After this m ready to enter the custom xperia world
Click to expand...
Click to collapse
U can try rage/kernel panic/mesa/krsh kernel after unlocking bootloader. Anyone u like. proceed here & u will find one stop solution (all the links) http://forum.xda-developers.com/showthread.php?t=1887855
Which one did you install?? if it is cm, the kernel is included in the zip file...
Sent from my WT19i using xda premium
Hi I want to install SlimCM Custom ICS Based rom to my new xperia U but not sure about the procedure [have read the guide but still confused] I've downloaded the rom and 2 kernels : ( vengence / SlidingXU ) but not sure which one will work with this rom.... Right now I'm on stock rom and kernel on android 2.3 gingerbread.... but I successfully unlocked my bootloader ... can someone step by step guide me as I don't have any roote access nor recovery installed right now in my phone...
Thanks in advance...
orangzeb said:
Hi I want to install SlimCM Custom ICS Based rom to my new xperia U but not sure about the procedure [have read the guide but still confused] I've downloaded the rom and 2 kernels : ( vengence / SlidingXU ) but not sure which one will work with this rom.... Right now I'm on stock rom and kernel on android 2.3 gingerbread.... but I successfully unlocked my bootloader ... can someone step by step guide me as I don't have any roote access nor recovery installed right now in my phone...
Thanks in advance...
Click to expand...
Click to collapse
i think you need to root your phone first,install cwm,then flash stock ICS ROM,after that then flash SlimCM rom.
what about kernel ?? do I need to install it in the end and what kernels work best with SlimCM ? won't I loose root when I flash stock ICS Rom ?
orangzeb said:
what about kernel ?? do I need to install it in the end and what kernels work best with SlimCM ? won't I loose root when I flash stock ICS Rom ?
Click to expand...
Click to collapse
erm...now you on GB right?
download stock ICS ftf,flash it,then root,install cwm
follow the instructions to install
http://forum.xda-developers.com/showthread.php?t=2143750
orangzeb said:
what about kernel ?? do I need to install it in the end and what kernels work best with SlimCM ? won't I loose root when I flash stock ICS Rom ?
Click to expand...
Click to collapse
Use fast boot and flash sliding xu kernel. Actually I recommend transcendence kernel. Flash that, reboot into recovery, copy ROM zip to storage. Wipe data, cache, dalvik and system and then flash slim cm zip
Sent from my Xperia U using xda app-developers app