Related
New here. (also apologies for probable duplicate topic)
I've rooted a phone in the past with no problem. This time round was with an S2, and I flashed an insecure kernel on it, got a green pass on Odin however it's now stuck on the boot screen with the yellow triangle.
I can access recovery mode and download mode but it will never boot properly, always stuck on the yellow triangle. What's the best course of action from here?
Need a lot of help with this guys as I'd rather not have a bricked phone ><
ikradex said:
New here. (also apologies for probable duplicate topic)
I've rooted a phone in the past with no problem. This time round was with an S2, and I flashed an insecure kernel on it, got a green pass on Odin however it's now stuck on the boot screen with the yellow triangle.
I can access recovery mode and download mode but it will never boot properly, always stuck on the yellow triangle. What's the best course of action from here?
Need a lot of help with this guys as I'd rather not have a bricked phone ><
Click to expand...
Click to collapse
Seriously dude? Use some common sense please and give relevant information on what you have. What model/variant do you have, rom are you on, what kernel have you flashed?
How do you expect anybody to be able to help you if you dont give such basic info???
Are you sure the kernel supports the rom/version you have installed?
ikradex said:
New here. (also apologies for probable duplicate topic)
I've rooted a phone in the past with no problem. This time round was with an S2, and I flashed an insecure kernel on it, got a green pass on Odin however it's now stuck on the boot screen with the yellow triangle.
I can access recovery mode and download mode but it will never boot properly, always stuck on the yellow triangle. What's the best course of action from here?
Need a lot of help with this guys as I'd rather not have a bricked phone ><
Click to expand...
Click to collapse
Maybe because you wiped all data....so...there's no ROM to boot up to.
Try flashing one via Odin
gastonw said:
Maybe because you wiped all data....so...there's no ROM to boot up to.
Try flashing one via Odin
Click to expand...
Click to collapse
Wiping data doesnt wipe rom , It just wipes appdata, ie settings etc. All that happens is a factory reset so when you next boot its back to default. For example you would need to re-enter google account and re-install apss either manually or from a backup.
You can only wipe rom by formatting system partition.
TheATHEiST said:
Wiping data doesnt wipe rom , It just wipes appdata, ie settings etc. All that happens is a factory reset so when you next boot its back to default. For example you would need to re-enter google account and re-install apss either manually or from a backup.
You can only wipe rom by formatting system partition.
Click to expand...
Click to collapse
Thought you had me in ignore.
So there's no way you can wipe your OS via recovery? Good to know that, it's like ROM over ROM then. The new one clears the old one.
gastonw said:
Thought you had me in ignore.
So there's no way you can wipe your OS via recovery? Good to know that, it's like ROM over ROM then. The new one clears the old one.
Click to expand...
Click to collapse
I did have you on ignore but I still see little boxes saying this comment has been ignored etc which was actually more annoying so I removed ignore.
Yes you can wipe OS via recovery but only by formatting system/deleting partition etc. All the "wipe" options do is remove files that have been created by rom like app settings/cache etc.
Your confusion was probably also the reason why you made a big thing in a previous topic about you trying to avoid wiping data, because you thought it wiped rom? :silly:
Wiping data/factory reset in cwm is one of the best ways to get rid of system issues, Its basically like doing a clean install of Windows on a PC. After you have wiped you can simply restore your needed apps from a backup using Titanium Backup. Other things like sms/mms etc can be also backed up easily and contacts will be synced via Google account.
TheATHEiST said:
I did have you on ignore but I still see little boxes saying this comment has been ignored etc which was actually more annoying so I removed ignore.
Yes you can wipe OS via recovery but only by formatting system/deleting partition etc. All the "wipe" options do is remove files that have been created by rom like app settings/cache etc.
Your confusion was probably also the reason why you made a big thing in a previous topic about you trying to avoid wiping data, because you thought it wiped rom? :silly:
Wiping data/factory reset in cwm is one of the best ways to get rid of system issues, Its basically like doing a clean install of Windows on a PC. After you have wiped you can simply restore your needed apps from a backup using Titanium Backup. Other things like sms/mms etc can be also backed up easily and contacts will be synced via Google account.
Click to expand...
Click to collapse
hum...okay.
I actually know what Factory Reset does, I mean..."factory"..."reset", kinda......gives it away.
And yes, it made sense to me that you could wipe the ROM you are on before installing a new one, just like the format c:/s days in win98.
You learn something every day, speaking of which, how come no one recommends noobs to root their device with exynos abuse? It's because they're noobs and wouldn't be able to handle/understand the exploit?
I still don't do factory resets because I don't need to, and I avoid needing to perform it.
TheATHEiST said:
Seriously dude? Use some common sense please and give relevant information on what you have. What model/variant do you have, rom are you on, what kernel have you flashed?
How do you expect anybody to be able to help you if you dont give such basic info???
Are you sure the kernel supports the rom/version you have installed?
Click to expand...
Click to collapse
Thanks for the reply Figured if someone was willing to help me I'd give them the information they wanted.
Have Samsung Galaxy S II (GT-I9100) (couldn't tell you what "variant" it is). I was following this guide. It told me to get an insecure kernel from here. The guide said it didn't really matter which kernel I picked so I picked the first one (GT-I9100_BGKF5_insecure) and used Odin to flash it. Got a green pass and the phone began reboot but it's now stuck on the yellow triangle (the warning message that you've flashed an insecure kernel).
I couldn't tell whether there would be compatibility issues as the thread just seems to be one big list of kernels and nothing else. AFAIK the phone was running ICS.
Looking at the replies, I keep seeing factory reset. Is that a liable option to restore my phone back to its original state. I don't care as long the phone works again. If not can someone run through how to fix my predicament I heard if I can access download and recovery mode I should be able to fix it.
ikradex said:
Thanks for the reply Figured if someone was willing to help me I'd give them the information they wanted.
Have Samsung Galaxy S II (GT-I9100) (couldn't tell you what "variant" it is). I was following this guide. It told me to get an insecure kernel from here. The guide said it didn't really matter which kernel I picked so I picked the first one (GT-I9100_BGKF5_insecure) and used Odin to flash it. Got a green pass and the phone began reboot but it's now stuck on the yellow triangle (the warning message that you've flashed an insecure kernel).
I couldn't tell whether there would be compatibility issues as the thread just seems to be one big list of kernels and nothing else. AFAIK the phone was running ICS.
Looking at the replies, I keep seeing factory reset. Is that a liable option to restore my phone back to its original state. I don't care as long the phone works again. If not can someone run through how to fix my predicament I heard if I can access download and recovery mode I should be able to fix it.
Click to expand...
Click to collapse
Of course, you're not bricked yet.
Before trying your back up, why don't you flash a stock ROM via odin and take a long breath?
This is JB leak.
These are ICS, look for 4.0.3 unbranded.
gastonw said:
Of course, you're not bricked yet.
Before trying your back up, why don't you flash a stock ROM via odin and take a long breath?
This is JB leak.
These are ICS, look for 4.0.3 unbranded.
Click to expand...
Click to collapse
I know this is leading onto another thread but my phone now is having trouble connecting to my computer. Keep getting "USB not recognized" error. Installed/Uninstalled kies & drivers then installed drivers again alone and still won't recognize it
Tried another usb port? another pc/laptop? sure kies is not running in background? reinstalled kies?
Don't worry, your pc WILL see your device.
Sent from the little guy
Hello first time rooting this phone. Its a SGH-I777. I used the guide from galaxys2root.com/. At first it didnt work because my computer didnt recongnize my phone. I tried a different computer and it seemed successful until it rebooted. When the phone rebooted it did nothing but stay on the first screen. I still have the ability to get into Odin mode(download mode), but that is it. When i put the phone in download mode and use Odin it allows me to download the "zimage" but after rebooting it is the same exact thing. I have tried the one click root, one click factory restore. Tried restoring it on Kies. and nothing work took it to a store and the guy said he tried but it would stop in the middle of the download the only option i had with him was purchasing a new mother board for $80. Does anyone have a solution that can help me fix my phone.
Before i attempted to root it, it had OS 2.3.6 with kernal 2.6.35.7.
Go to the development section and read the stickies. There you will find stock rooted packages you can flash with Odin.
Sent from my SGH-I777 using xda premium
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
jmula said:
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
Click to expand...
Click to collapse
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
creepyncrawly said:
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
Click to expand...
Click to collapse
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
jmula said:
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
Click to expand...
Click to collapse
The next thing I would suggest is to try and flash the UCKH7 full stock package with bootloaders. However, as the dropbox links in the download repository are currently suspended, you will have to download it from SamFirmware. To be able to download, you will need to register for free if you havn't already. Search sgh-i777 in the upper right hand corner of the page, then download the I777UCKH7 version. Let us know if that will flash.
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
jmula said:
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
Click to expand...
Click to collapse
Flash a .tar version of a custom kernel with Odin. I always use an old siyah.tar, but that's just me. There are other methods floating around but that's the quickest and easiest for me. I think there's an old entropy dd.tar around somewhere too. But just flash it through Odin and you're good to go, assuming you flashed one for your version of android. If you just want to get into recovery to flash something this works as well.
There may be links to tar versions of the kernels in creepy's sig I don't remember offhand.
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
jmula said:
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
Click to expand...
Click to collapse
Give up???
I personally don't think flashing a kernel with odin is the best way to root. It increments the flash counter, for one thing, though I'm not sure how many people care about that anymore. I would suggest that you use the stock plus root package to root the phone with odin. See the links in my sig.
Guide... did someone say guide?
Feeling the pain....
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
judib said:
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
Click to expand...
Click to collapse
The ExynosAbuse application is the only practical way to root 4.0.4 without changing base. You can download it as an attachment in the OP of the developer's thread, but read through the thread first to understand its limitations and risks.
Alternatively, you could flash 4.0.3 plus root from the development forum. If you choose that route, please read the thread to understand how to install a custom kernel, which is recommended whether you plan to install a custom firmware or not. The custom kernel will contain ClockworkMod Recovery so you can flash the firmware of your choice if you wish.
There are really several routes you could choose. All of them work. Another would be to flash back to stock Gingerbread plus root. For that see my guide How to Flash Custom Binaries Without Ever Incrementing the Flash counter!! (link in sig)
Hmmmmm..
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
b0bb said:
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
Click to expand...
Click to collapse
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Phalanx7621 said:
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Click to expand...
Click to collapse
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
b0bb said:
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
Click to expand...
Click to collapse
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
creepyncrawly said:
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
Click to expand...
Click to collapse
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
b0bb said:
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
Click to expand...
Click to collapse
Not at all. I want people to help others here. I want you to help other here as well. But it is important to post only accurate information. Inaccurate information can cause someone to do the wrong action. So I always correct misinformation.
Wow! I need some help. I've acquired a Samsung Galaxy Note (i717, I believe) that shows all the signs of being healthy (appearance, touch screen, etc.) but persistently slows down at the ATT opening splash screen, begins to load Android, dies and reboots. Whatever variant rooted ROM I received it with (sluggish and unreliable) I have written over and now I can't get any farther than the Android settings screen. Therefore I do not know the exact version nor can I begin to set it up (wifi, etc.).
That's the 'presenting problem', so let me explain what I've done to this point (about 25 hrs. worth!). I have reloaded latest version of CWM (runs great) and then Padawan JB . . . same symptoms. I have loaded the ATT JB and ICS via the latest Odin successfully . . . with same symptoms. I have loaded TWRP (touch screen is snappy and works as it should) and Padawan JB again . . . with same symptoms. I have wiped caches before, after, and in between till I'm blue in the face, each time with the same symptoms. Most recently I have done a hard reset to native/factory settings . . . with no change! I've tried to scour the XDA (and any other sites) trouble shooting articles and seem to have come to a dead end.
Here's a couple things that I'm wondering: because I can't get deep enough into Android to check out the model number, could the phone be something other than an ATT model? At the top of the front face it simply says 'Samsung', not ATT at top and Samsung at bottom like my previous ATT Note. Right after boot I persistently get an ATT splash screen which would lead me to believe that it is ATT. Is there some other way to find model, say in TWRP? Do I need a phone specific version of Android? Second, everything seems to be working fine physically (i.e., no hardware problems). Could this thing have gotten a virus in an earlier life that's preventing the ROM from working right? I've not been able to get far enough to register it with my cell provider (second party, not ATT). Must you be up and running with the cell service to correctly load and use the ROM (wouldn't think so)? And if so, how without Android working? I've been using and playing with computers for 25 years, but I'm fairly new to the Android system (but learning fast!) Any help would sure be appreciated. I'd really like to resurrect this baby. I loved my first Note (till it fell off the car and disappeared).
pstrulm said:
Wow! I need some help. I've acquired a Samsung Galaxy Note (i717, I believe) that shows all the signs of being healthy (appearance, touch screen, etc.) but persistently slows down at the ATT opening splash screen, begins to load Android, dies and reboots. Whatever variant rooted ROM I received it with (sluggish and unreliable) I have written over and now I can't get any farther than the Android settings screen. Therefore I do not know the exact version nor can I begin to set it up (wifi, etc.).
That's the 'presenting problem', so let me explain what I've done to this point (about 25 hrs. worth!). I have reloaded latest version of CWM (runs great) and then Padawan JB . . . same symptoms. I have loaded the ATT JB and ICS via the latest Odin successfully . . . with same symptoms. I have loaded TWRP (touch screen is snappy and works as it should) and Padawan JB again . . . with same symptoms. I have wiped caches before, after, and in between till I'm blue in the face, each time with the same symptoms. Most recently I have done a hard reset to native/factory settings . . . with no change! I've tried to scour the XDA (and any other sites) trouble shooting articles and seem to have come to a dead end.
Here's a couple things that I'm wondering: because I can't get deep enough into Android to check out the model number, could the phone be something other than an ATT model? At the top of the front face it simply says 'Samsung', not ATT at top and Samsung at bottom like my previous ATT Note. Right after boot I persistently get an ATT splash screen which would lead me to believe that it is ATT. Is there some other way to find model, say in TWRP? Do I need a phone specific version of Android? Second, everything seems to be working fine physically (i.e., no hardware problems). Could this thing have gotten a virus in an earlier life that's preventing the ROM from working right? I've not been able to get far enough to register it with my cell provider (second party, not ATT). Must you be up and running with the cell service to correctly load and use the ROM (wouldn't think so)? And if so, how without Android working? I've been using and playing with computers for 25 years, but I'm fairly new to the Android system (but learning fast!) Any help would sure be appreciated. I'd really like to resurrect this baby. I loved my first Note (till it fell off the car and disappeared).
Click to expand...
Click to collapse
Well, if you keep flashing an AT&T based rom, then yes, you will get an AT&T boot animation simply because it's part of the rom you are flashing.
You said "you think" you have an I717, did you take the battery off and physically look at the sticker beneath it to see the model?
Try TWRP, go to WIPE, and WIPE everything, which means checking every checkbox. Then flash a stock rom with a fresh phone (no data, nothing at all)
You said you did CWM->Padawan.. these are two totally different roms, so you should always do a factory reset whenever flashing two totally different roms.
You can't just rely on the Android->settings to see the info since roms overwrite these stuff in build.prop so if you flash a wrong rom, wrong info will show up.
Here's my advice:
1. Flash TWRP
2. Wipe in TWRP, check every checkbox
3. Flash a stock i717 rom
4. Reboot
If that doesn't work, either hardware is bad or your phone isn't for the I717 roms.
Edit:
Question, have you ever come to a point that the phone boots successfuly at all? You did mention CM works great. But you can't go from CWM->TW Based rom without factory reset in between.
fbauto1 said:
Well, if you keep flashing an AT&T based rom, then yes, you will get an AT&T boot animation simply because it's part of the rom you are flashing.
You said "you think" you have an I717, did you take the battery off and physically look at the sticker beneath it to see the model?
Try TWRP, go to WIPE, and WIPE everything, which means checking every checkbox. Then flash a stock rom with a fresh phone (no data, nothing at all)
You said you did CWM->Padawan.. these are two totally different roms, so you should always do a factory reset whenever flashing two totally different roms.
You can't just rely on the Android->settings to see the info since roms overwrite these stuff in build.prop so if you flash a wrong rom, wrong info will show up.
Here's my advice:
1. Flash TWRP
2. Wipe in TWRP, check every checkbox
3. Flash a stock i717 rom
4. Reboot
If that doesn't work, either hardware is bad or your phone isn't for the I717 roms.
Edit:
Question, have you ever come to a point that the phone boots successfuly at all? You did mention CM works great. But you can't go from CWM->TW Based rom without factory
I would reflash cwm thru odin after that I would flash the latest TWRP 2.5. Then you can flash whatever. If padawan is givin u problems try something else like AOSP or AOKP. Padawan is TW based. JaimeD builds are pretty sweet.
sent from my GalaxySuperNote running OC Padawan JB
Click to expand...
Click to collapse
androidmechanic said:
fbauto1 said:
Well, if you keep flashing an AT&T based rom, then yes, you will get an AT&T boot animation simply because it's part of the rom you are flashing.
You said "you think" you have an I717, did you take the battery off and physically look at the sticker beneath it to see the model?
Try TWRP, go to WIPE, and WIPE everything, which means checking every checkbox. Then flash a stock rom with a fresh phone (no data, nothing at all)
You said you did CWM->Padawan.. these are two totally different roms, so you should always do a factory reset whenever flashing two totally different roms.
You can't just rely on the Android->settings to see the info since roms overwrite these stuff in build.prop so if you flash a wrong rom, wrong info will show up.
Here's my advice:
1. Flash TWRP
2. Wipe in TWRP, check every checkbox
3. Flash a stock i717 rom
4. Reboot
If that doesn't work, either hardware is bad or your phone isn't for the I717 roms.
Edit:
Question, have you ever come to a point that the phone boots successfuly at all? You did mention CM works great. But you can't go from CWM->TW Based rom without factory
I would reflash cwm thru odin after that I would flash the latest TWRP 2.5. Then you can flash whatever. If padawan is givin u problems try something else like AOSP or AOKP. Padawan is TW based. JaimeD builds are pretty sweet.
sent from my GalaxySuperNote running OC Padawan JB
Click to expand...
Click to collapse
If you want TWRP, flash TWRP. No need to flash CWM
Click to expand...
Click to collapse
AT&T Phones have a [logo}AT&T] on the top-center!!
But if you are in doubt, use kies to do a full recovery-restore [WILL ERASE EVERYTHING ON YOUR DEVICE].
See post #4 on this thread.
fbauto1 said:
androidmechanic said:
If you want TWRP, flash TWRP. No need to flash CWM
Click to expand...
Click to collapse
If you go thru Odin you would have cwm first. With the problems talked about, I would go back factory stock then re-root with Odin. Then thru cwm, flash twrp or whatever floats your boat.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
androidmechanic said:
If you go thru Odin you would have cwm first. With the problems talked about, I would go back factory stock then re-root with Odin. Then thru cwm, flash twrp or whatever floats your boat.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Nope. If you want TWRP, then flash TWRP via Odin. No need to go through CWM first. You can flash TWRP via Odin, you know that, right?
fbauto1 said:
Nope. If you want TWRP, then flash TWRP via Odin. No need to go through CWM first. You can flash TWRP via Odin, you know that, right?
Click to expand...
Click to collapse
No I didn't know that. All of the Odin programs that I dealt with flash cwm. Than for the Intel tho. :thumbup:
Sent from my SAMSUNG-SGH-I717 using xda premium
fbauto1 said:
Nope. If you want TWRP, then flash TWRP via Odin. No need to go through CWM first. You can flash TWRP via Odin, you know that, right?
Click to expand...
Click to collapse
androidmechanic said:
No I didn't know that. All of the Odin programs that I dealt with flash cwm. Than for the Intel tho. :thumbup:
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
you are both actually correct, however, I am looking at PSTRULM's stats. if he is anything like me when I started, the more simple and less complication involved in the process, the more he may understand.
ANDROIDMECHANIC is stating the most basic and beginner way to do this and understand simply. after doing this a few times as I did, the basic mechanics of the process will become more fluent.
then he can make his own decisions as to methods which might be easier for him, without confusing.
I am sure you both are a huge help to everyone and I thank members such as yourself for your efforts. ME, I prefer baby steps, cause I know I can really EFF things up if I get confused
androidmechanic said:
No I didn't know that. All of the Odin programs that I dealt with flash cwm. Than for the Intel tho. :thumbup:
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Just a reminder.. when flashing through Odin, make sure it's an ODIN-flashable tarball, i.e., you can't flash a recovery-type zip through Odin and vice versa.
Hi Folks,
I am selling my GS3 to Mazuma mobile for £90 & need to return the phone to stock samsung rom from the custom rom I'm using at the moment (Fusion 2.0.6)
1 Use philz recovery to do full phone wipe & also the install new rom wipe.
2 Use Odin to flash the last UK BTU stock rom MK6.
3 Possibly use TriangleAway to get rid of the red exclamation mark when phone first boots.
4 Possibly flash stock rom again to be sure.
Are those steps ok or is there anything else I will need to do?
Would really appreciate quick reply as I will be wiping & flashing stock tomorrow before posting to Mazuma the same day.
Cheers.
BanziBaby said:
Hi Folks,
I am selling my GS3 to Mazuma mobile for £90 & need to return the phone to stock samsung rom from the custom rom I'm using at the moment (Fusion 2.0.6)
1 Use philz recovery to do full phone wipe & also the install new rom wipe.
2 Use Odin to flash the last UK BTU stock rom MK6.
3 Possibly use TriangleAway to get rid of the red exclamation mark when phone first boots.
4 Possibly flash stock rom again to be sure.
Are those steps ok or is there anything else I will need to do?
Would really appreciate quick reply as I will be wiping & flashing stock tomorrow before posting to Mazuma the same day.
Cheers.
Click to expand...
Click to collapse
Download official stock rom for your region, wipe data/cache from recovery, put phone in Download mode, close Kies from Task Manager, start Odin, connect phone to PC and flash stock rom. After the flashing process is done enter recovery and make wipe data/cache and then reboot. Use triangle away to clear the binary count + the exclamation mark. If it needs root permission flash a custom kernel to gain root and then re-run triangle away. After clearing the binary count and exclamation sign you can re-flash the stock rom. Make another wipe data/cache after flashing it and you should be good to go
Goodluck mate !!!:thumbup::thumbup:
Sent from my GT-I9300
Cheers for the reply AlexVat
Was kinda hoping it wasn't going to be so complicated lol, I assume when I flash stock rom with Odin that will wipe Philz recovery & just have the stock one?
Could it be possible to run triangle away first then then just flash stock rom?
All replies appreciated
Well triangle away didn't work when I ran that first & it didn't even reboot into it's custom recovery, also thought I borked my Samsung 32gb SD card, used my S3 to erase it after copying everything off it I needed but it then wouldn't mount again. Tried it in PC & kept getting write protected error when trying to format it.
As last resort I fired it into my Sony Z2 & it said it was corrupted, tapped the message & it then fixed what ever was wrong with it & formatted it. Will just flash stock rom tomorrow morning & fire it to them, from what I see online they don't really care if it was rooted.
All done, custom binary says no & stock BTU MK6 rom installed, will get posted tomorrow & will have £90 in my bank by Sat
Also getting replacement Z2 due to gaps, over heating & camera being off centre, will be checking it fully & using built in diagnostics to make sure screen has no dead pixels etc.
Mods can close this thread if they wish, many thanks to AlexVat for the help
BanziBaby said:
All done, custom binary says no & stock BTU MK6 rom installed, will get posted tomorrow & will have £90 in my bank by Sat
Also getting replacement Z2 due to gaps, over heating & camera being off centre, will be checking it fully & using built in diagnostics to make sure screen has no dead pixels etc.
Mods can close this thread if they wish, many thanks to AlexVat for the help
Click to expand...
Click to collapse
I'm glad I could help you, mate. Enjoy your new device Cheers and have a great weekend!
Ok, so I've rooted and put custom roms on numerous phones. I've been trying to put a custom recovery, twrp or cwm, whatever, on my wife's phone, but have got a wall. I know for sure, 100% that I am rooted. I tired to install twrp and cwm via their respective apps, ends up in either bootloop trying to boot into recovery (and FYI, the screen shows that a custom recovery is installed, just doesn't load into recovery and restarts). And tried both via Odin, but got the same result. Have never ran into this problem before with any of my phone's, all of the galaxy's and Galaxy Note's since the S2. Any help would be greatly appreciated. Thanks homies!
Just to add, yes I made sure double checked, triple checked that I was installing the correct recovery for the phone model. Also, she has done all the ota updates that sprint has pushed as of last week (2/9/15).
Psychotic-Cerebellum said:
Ok, so I've rooted and put custom roms on numerous phones. I've been trying to put a custom recovery, twrp or cwm, whatever, on my wife's phone, but have got a wall. I know for sure, 100% that I am rooted. I tired to install twrp and cwm via their respective apps, ends up in either bootloop trying to boot into recovery (and FYI, the screen shows that a custom recovery is installed, just doesn't load into recovery and restarts). And tried both via Odin, but got the same result. Have never ran into this problem before with any of my phone's, all of the galaxy's and Galaxy Note's since the S2. Any help would be greatly appreciated. Thanks homies!
Just to add, yes I made sure double checked, triple checked that I was installing the correct recovery for the phone model. Also, she has done all the ota updates that sprint has pushed as of last week (2/9/15).
Click to expand...
Click to collapse
OK, from your post it looks like you have done this before. To be sure lets go through the motions one more time.
Your device is updated to 4.4.4 NK4 the latest KitKat version. It's rooted you have supersu icon and run a root checker. First download again ( in case you got a bad download ) a copy of Philz CWM version 6.48.4 here is the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte/ use "phil'z_touch_6.48.6-hlte.tar.md5" . I like to use odin version v1.85 it's little older but very stable, here is a link https://mega.co.nz/#!oA5xzTAL!LXoVWB...ZlOMSWdRGVX6Uo now flash the .tar file with odin. Make sure you let device boot up on it's own back to the OS, do not pull the cable and boot the device yourself. Then try and boot into recovery.
If it bootloops again, I would backup all your data to the PC desktop, and then do a factory reset get back to bone stock ( that means when your in download mode it says Samsung Official status not custom ) so many times I have seen folks with an unrooted device where the bootloader still says custom and you end up with a dirty flash or worse. It may take a couple factory resets to get back to stock, it doesn't always take the first time. When I flash a custom rom and then decide to go back to stock, I flash the rom two or three times to make sure I'm bone stock.
If the factory reset doesn't work you may have to flash a new stock NK4 OS. Then root again and install the recovery. Here is my thread with all the info you need http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 , Enjoy !!!
Thanks for taking the time to give me a detailed response. Sounds like I'm gonna have to wait till Wednesday or Thursday when im off work and have some time to do this, but yeah, I was thinking maybe just a factory reset, but I'll use your links and try it one more time first. I'll let ya know. Thanks again
Do you have another link to the older Odin (1.85).the link says the file isn't there... Thanks again
Never got to test it out, but she didn't really want a custom rom anyway, just the WiFi hotspot, and I finally found a method that works, big shout out to idone for his awesome app. If anyone else is looking for WiFi hotspot without root that sees this, check out his tread in the apps and themes, for this phone. Worked like a charm. Thanks again jimzweb1. Much appreciate the reply!
Psychotic-Cerebellum said:
Never got to test it out, but she didn't really want a custom rom anyway, just the WiFi hotspot, and I finally found a method that works, big shout out to idone for his awesome app. If anyone else is looking for WiFi hotspot without root that sees this, check out his tread in the apps and themes, for this phone. Worked like a charm. Thanks again jimzweb1. Much appreciate the reply!
Click to expand...
Click to collapse
Awesome, Ya idone is the man when it comes to enabling the mobile hotspot be careful what you click with app. I will correct that link. Thanks
Psychotic-Cerebellum said:
Ok, so I've rooted and put custom roms on numerous phones. I've been trying to put a custom recovery, twrp or cwm, whatever, on my wife's phone, but have got a wall. I know for sure, 100% that I am rooted. I tired to install twrp and cwm via their respective apps, ends up in either bootloop trying to boot into recovery (and FYI, the screen shows that a custom recovery is installed, just doesn't load into recovery and restarts). And tried both via Odin, but got the same result. Have never ran into this problem before with any of my phone's, all of the galaxy's and Galaxy Note's since the S2. Any help would be greatly appreciated. Thanks homies!
Just to add, yes I made sure double checked, triple checked that I was installing the correct recovery for the phone model. Also, she has done all the ota updates that sprint has pushed as of last week (2/9/15).
Click to expand...
Click to collapse
That's the problem Knox security is getting harder flash engineering boot loader again then try rashr in app store to flash philz