[Q] Rooted XPS being not able to install CWM - Sony Xperia P, U, Sola, Go

My XPS is ROOTED w/o unlocking bootloader.
I follow the following instruction to install CWM on my XPS.
However, I got stuck when typing the cmd comment.
It kept telling me the device is not rooted, but Im certain on the fact that
my XPS is rooted since I have superuser, RE, Titanium backup.
PS: I am using Generic CH (1257-3740) XPERIA S LT26i ROM (6.1.A.0.452)
How to Install Doomlord’s ClockworkMod Recovery on Xperia S
Download the Doomlord CWM Recovery image (download link here) and the Wi Fi Module for Doom Kernel (download link here) and place the same to the computer.
Go and rename the “S-DooMKernel-v01_kernel.elf” file into “kernel.elf”.
Copy the file renamed on the same folder with ADB / fastboot.
Take your phone and its USB cord and by using both connect it with the computer.
Copy-paste the “S-DooMKernel-v01-Modules.zip” file from the PC to the Xperia S SD card.
Disconnect the smartphone from the computer.
Reboot it by entering in fastboot; press the Volume Up button while connecting the phone with the PC.
On the computer open command prompt (Start -> run -> cmd) and enter the command: fastboot flash boot kernel.elf. If this isn’t working try with: fastboot -i 0x0fce flash boot kernel.elf.
The handset should reboot.
When you see the light turn blue hold the Voluem Up button. The Xperia S will enter in recovery mode.
In the recovery menu select “install zip from sd card” and pick the file copied there on step 3.
The installation procedure should begin. Don’t press anything as the process might take up to 10 minutes to complete.
In the end, from the recovery mode menu select “reboot system now” and you are done.
There you have it; that was the easiest and fastest way in which you can learn how to install Doomlord’s ClockworkMod Recovery on your Xperia S smartphone. Do tell us if there were problems on your way, of if you had issues in understanding one of my directions. Now you can go and update your Xperia S with the lasts ROMs available. Take a look and see if the Cyanogen Mod 9 Ice Cream Sandwich ROM is what you are looking for.

Waiting for someone else to confirm this method. You should post it on General or maybe Dev section, to attract more attention.
Sent from my LT26i using Tapatalk 2

or is there any other method to get CWM???
thx for replying tho

xdewtr said:
My XPS is ROOTED w/o unlocking bootloader.
Copy the file renamed on the same folder with ADB / fastboot.
Click to expand...
Click to collapse
fastboot needs unlocked bootloader
/thread

Related

New To Dell Streak and.......

Considering rooting it.
Hello guys n girls, as the title says im new to this bit of kit (Dell streak 5) having purchased it on monday and very happy with it so far.
I did have a desire and rooted that with help from a friend and would like to do the same with this but aint got a clue really how to ?
Any one have a little time spare and point me in the right direction to rooting?......Please
Cheers
Android Version 2.2.2
baseband : GAUSB1A34500-US
KERNEL version : 2.6.32.9-perf
OEM : GAUSB1A134500
Build : 15380
1. Then copy over the file Superuser.zip Attachment 545097 (http://forum.xda-developers.com/attachment.php?attachmentid=545097) into
SD card. This is the Superuser app
2. Turn off your phone and flash to fastboot menu
3. unzip streakmod-recovery Attachment 545093 (http://forum.xda-developers.com/attachment.php?attachmentid=545093) to you computer
4. flash recover.img >> fastboot -i 0x413c flash recovery recovery-SU.img (or whatever you renamed the recovery file to)
5. reboot >> fastboot -i 0x413c reboot
6. go to recovery mode (volume rocker up+down+power button key)
7.select install ZIP from sdcard
8.select choose zip from sdcard
9.select superuser.zip file you downloaded earlier, and apply it
10.select yes - install superuser.zip
11.confirm it says "Install from sdcard complete"
12.select go back
13.select reboot
14.done!
Thanks for the reply.
Tbh im lost lol I understand everything after 6 but nothing before. (fastboot blah blah)
what do I need to dload for me win 7 laptop so that I can write the commands?
Chris
[/B]QUOTE=rvbarton;13037061]Android Version 2.2.2
baseband : GAUSB1A34500-US
KERNEL version : 2.6.32.9-perf
OEM : GAUSB1A134500
Build : 15380
1. Then copy over the file Superuser.zip Attachment 545097 (http://forum.xda-developers.com/attachment.php?attachmentid=545097) into
SD card. This is the Superuser app
2. Turn off your phone and flash to fastboot menu
3. unzip streakmod-recovery Attachment 545093 (http://forum.xda-developers.com/attachment.php?attachmentid=545093) to you computer
4. flash recover.img >> fastboot -i 0x413c flash recovery recovery-SU.img (or whatever you renamed the recovery file to)
5. reboot >> fastboot -i 0x413c reboot
6. go to recovery mode (volume rocker up+down+power button key)
7.select install ZIP from sdcard
8.select choose zip from sdcard
9.select superuser.zip file you downloaded earlier, and apply it
10.select yes - install superuser.zip
11.confirm it says "Install from sdcard complete"
12.select go back
13.select reboot
14.done![/QUOTE]
chrisvr4 said:
Thanks for the reply.
Tbh im lost lol I understand everything after 6 but nothing before. (fastboot blah blah)
what do I need to dload for me win 7 laptop so that I can write the commands?
Chris
[/B]QUOTE=rvbarton;13037061]Android Version 2.2.2
baseband : GAUSB1A34500-US
KERNEL version : 2.6.32.9-perf
OEM : GAUSB1A134500
Build : 15380
1. Then copy over the file Superuser.zip Attachment 545097 (http://forum.xda-developers.com/attachment.php?attachmentid=545097) into
SD card. This is the Superuser app
2. Turn off your phone and flash to fastboot menu
3. unzip streakmod-recovery Attachment 545093 (http://forum.xda-developers.com/attachment.php?attachmentid=545093) to you computer
4. flash recover.img >> fastboot -i 0x413c flash recovery recovery-SU.img (or whatever you renamed the recovery file to)
5. reboot >> fastboot -i 0x413c reboot
6. go to recovery mode (volume rocker up+down+power button key)
7.select install ZIP from sdcard
8.select choose zip from sdcard
9.select superuser.zip file you downloaded earlier, and apply it
10.select yes - install superuser.zip
11.confirm it says "Install from sdcard complete"
12.select go back
13.select reboot
14.done!
Click to expand...
Click to collapse
[/QUOTE]
To to google, in search type in SuperOneClick v1.1.5 go into settings>applications>development>USB debugging and make sure thats checked. Then go back to the superoneclick and click root. If that dont work try shutting down the phone and and once the phone is powered off click the root button in SOC when SOC says "waiting for device"go ahead and power your phone back on. And if that method also dont work then remove your memory card power on your phone and attempt to root again. Good luck!
Just done a search and come up with this http://software2tech.com/tag/superoneclick-1-5-5/
Is that what I need? Also what about a recovery image? Rom manager from,market?
Thanks
To to google, in search type in SuperOneClick v1.1.5 go into settings>applications>development>USB debugging and make sure thats checked. Then go back to the superoneclick and click root. If that dont work try shutting down the phone and and once the phone is powered off click the root button in SOC when SOC says "waiting for device"go ahead and power your phone back on. And if that method also dont work then remove your memory card power on your phone and attempt to root again. Good luck![/QUOTE]
chrisvr4 said:
Just done a search and come up with this http://software2tech.com/tag/superoneclick-1-5-5/
Is that what I need? Also what about a recovery image? Rom manager from,market?
Thanks
To to google, in search type in SuperOneClick v1.1.5 go into settings>applications>development>USB debugging and make sure thats checked. Then go back to the superoneclick and click root. If that dont work try shutting down the phone and and once the phone is powered off click the root button in SOC when SOC says "waiting for device"go ahead and power your phone back on. And if that method also dont work then remove your memory card power on your phone and attempt to root again. Good luck!
Click to expand...
Click to collapse
[/QUOTE]
I'm not to familiar with a recovery. I find the stock ROM to be quiet stable. I'm here to only help you root your device. And yes thats the one you need from the link you posted.
ok dude cheers.
Will give it a shot later and let you know
Chris
QUOTE=RussianSolja;13053776][/QUOTE]
I'm not to familiar with a recovery. I find the stock ROM to be quiet stable. I'm here to only help you root your device. And yes thats the one you need from the link you posted. [/QUOTE]
Right i managed to root pretty easily now im stuck as i need a recovery so can backup n download a rom ?
Any easier help in doing this......please

How do you install Cyanogen mod on xperia u??

I see that there aren't detailed guides on how to install Cyanogen mod on Xperia U
I still got my bootloader locked, on the Cyanogen thread it doesn't say which kernel to flash, how to unlock bootloader..http://forum.xda-developers.com/showthread.php?t=1876927
So. I Have CWM recovery installed, and locked bootloader. I am using Stock 4.0.3.
What do i have to do to get Cyanogen mod running on my Xperia U?
Please be as detailed as possible while explaining.(Thread to unlock bootloader. Thread for Cyanogen Kernel)
CM will work only on an unlocked bootloader unless specified otherwise You need to use FireDroid 1.3 as its the only CM working on Locked bootloader Just reboot into CWM and do the install + wipes as suggested by the thread Just comment back here if you need help
Cheers
Min3r said:
CM will work only on an unlocked bootloader unless specified otherwise You need to use FireDroid 1.3 as its the only CM working on Locked bootloader Just reboot into CWM and do the install + wipes as suggested by the thread Just comment back here if you need help
Cheers
Click to expand...
Click to collapse
well look here http://forum.xda-developers.com/showthread.php?t=1876927
it sais for unlocked bootloader only.
but it doesn't say which kernel to use.
and there aren't any links on how to unlock the bootloader.
Ligux is also based on cm and basicly full cm but small extra options
And works on locked BL to
Its based on latest cm9 203
Sent from my ST25i using xda app-developers app
For unlock you can simply use flash tool just need root access and its easy
Sent from my ST25i
Go to Sony's unlock page to unlock ur bootloader
Sent from my LT22i using Tapatalk 2
unlock your bootloader by these ways-
1)install usb drivers of xperia u..
2)Download Fast Boot Package (With USB Drivers)
3)Switch Off Your Device & Connect It To The Computer Using USB Cable While Enabling Fast Boot Mode (Press & Hold Volume Up Button To Trigger Fastboot Mode). Windows Will Start Driver Installation As soon As You’ll Connect Your Device To The Computer While Keeping It In Fastboot Mode.
3)Now Extract The Fastboot Package You’ve Just Downloaded.You Will Find 2 Folders Named As ‘fastboot’ & ‘usb_driver’.
4)Point Driver Installation Location To ‘usb_driver’ Folder.
5)Once Drivers Get Installed, Disconnect Xperia U From PC & Power On It.
6)Before Unlocking Bootloader, You Need To Check That if Your Device’s Bootloader Can Be Unlocked Or Not. For Checking Bootloader Status Dial *#*#7378423#*#* From Phone Dialer To Access Service Menu.Find Bootloader Unlock Status Over There. If It is Set To Yes Then Only You Can Unlock Your Device’s Bootloader Otherwise It’s Impossible To Unlock It.
7)After Verifying Bootloader Unlock Status Set To Yes, Go To Sony’s Official Bootloader Unlocking Site.
8)Scroll To The Bottom of The Page & Press Continue.
You Will be Prompted With The Message “Are You Sure ?”. Accept It By Clicking On “Yes I Am Sure”.(Assuming That You’ve Read It Properly). Then Accept The Legal Terms.
Now You’ll Get “Create Unlock Request” Page.Enter Your Name, Email Address & IMEI (Which You’ve Noted in Essential Steps Mentioned Above).
You’ll Now Get Unique Key Which Will Be Displayed On The Screen. Save It Safely As We Will Require It In Next Part Of The Article.
9)Open Command Prompt In Your Computer & Point/Set It’s Location To ‘fastboot’ Folder.
Again Connect Your Device To PC By Enabling Flash Mode On It..
10)Now In Command Prompt (CMD) Type The Following Command :
fastboot.exe -i 0x0fce getvar version
11)If Value is Returned (It Should return 0.5), It Means Device is Connected Properly.
Type This Second Command Mentioned Below :
fastboot.exe -i 0x0fce oem unlock 0xKEY (on the place of KEY give the unique key you have got in step 8) and hit enter..
YOUR BOOTLOADER IS UNLOCKED.. :victory:
---------- Post added at 02:43 PM ---------- Previous post was at 02:32 PM ----------
Procedure to Install Cyanogenmod 9.3 on Sony Xperia U ST25i:
1)Custom Recovery like Clockworkmod must be installed in order flash this ROM.
2)Download latest Cyanogenmod 9.3 package from any site (Cyanogen10 has not yet been released for xperia u)
3)Download Google Add-on Apps (Gmail, Maps, GTalk, Play Store etc.) which are not present in ROM by default.
4)After downloading CM9.3 package, connect your device to PC. Enable mass storage mode on it. Now transfer ROM package & Google Apps to your device’s internal SD card.
Now disconnect the phone from computer. Boot in recovery mode on your phone. To do so, switch off the phone, switch it on again, when phone is restarting (during boot logo & LED turns blue), press Volume up button. Your phone will land in recovery mode.
5)Take a nandroid backup of your current ROM so that it can be restored back (in case if anything goes wrong). To backup your current ROM, select Backup and Restore option from the recovery mode & on next screen, select backup. Now It will make a nandroid backup of your whole system (excluding SD card). Wait for the backup process to get finished.
6)Now Select “install zip from sdcard” & then “choose zip from sdcard“. Navigate the ROM file (which you’ve transferred earlier) Select it & press on ‘Yes‘ to continue. ROM installation process will start.
Wait for the ROM to get installed. After ROM gets successfully installed, your phone will land in the recovery mode again.
(Optional) The same procedure you have to do for installation of Google Apps. (Just don’t do the above step i.e, wiping data after installation of Gapps). After you finished installation of Gapps, press back button to go to main menu of CWM.
7)Select wipe data/factory reset & wipe cache partition to wipe all the data & caches from the phone memory respectively.
Select reboot system now from the recovery mode to Restart the phone. Switch off it again.Now download the ADB & fastboot files which we will need to flash the kernel image.
8)Extract above rar file to a convenient location/folder (Fastboot Folder).
Open Cyanogenmod 9.3 ROM package using WinRAR or 7-zip, extract boot.img file (which is nothing but a kernel) to any convenient location. (It is located in the root directory of the ROM).
Now move the kernel file (boot.img) where ADB & fastboot files are located.
9)On the phone (while switched off), enter into the fastboot mode. To do so, Connect your phone to the computer. While connecting press Volume up button to trigger fastboot mode.
10)Open the folder which contains ADB & Fastboot files.
Run commandprompt.bat file to open command prompt pointing to the ADB & Fastboot folder.
Type the following command in command prompt to flash the kernel file:
fastboot flash boot boot.img
11)Restart the phone by typing “fastboot reboot” (without quotes) in command prompt.
FINALLY YU WILL HAVE CYANOGEN9.3 CUSTOM ROM IN YOUR PHONE...:victory:
xnd_bogdan said:
I see that there aren't detailed guides on how to install Cyanogen mod on Xperia U
I still got my bootloader locked, on the Cyanogen thread it doesn't say which kernel to flash, how to unlock bootloader..http://forum.xda-developers.com/showthread.php?t=1876927
So. I Have CWM recovery installed, and locked bootloader. I am using Stock 4.0.3.
What do i have to do to get Cyanogen mod running on my Xperia U?
Please be as detailed as possible while explaining.(Thread to unlock bootloader. Thread for Cyanogen Kernel)
Click to expand...
Click to collapse
Requirements
1) CWM recovery
2) Unlocked bootloader
how to
1) Copy zip to sd
2) extract boot.img from the zip file
3) fastboot that img file viia flashtool
4) full wipe
5) now flash the zip file via cwm
6) reboot

[Tutorial] Root, Unlock, Recovery and flashing a Custom ROM

This is long, but it's nice for noobs because it's detailed. It's honestly kind of fun, I promise. I'm assuming you have WINDOWS. This is based off of the guide by torxx!. It's modified because some of the info is outdated (you don't have to flash the boot.mg separately, for example). If you are NOT a noob you can just look at the "overview" for each step.
UNLOCKING YOUR DEVICE WILL WIPE YOUR DEVICE. THIS IS A SECURITY FEATURE. BACKUP FIRST.
Part 1- gaining unlock token
Overview: go to htcdev.com and unlock bootloader
Be sure you've turned off fast boot option in power menu; usb debugging should be on (settings -> developer options).
Go to http://www.htc.com/www/software/htc-sync-manager/[1] and install HTC SYNC. Alternatively, if you know what you're doing, you can install these drivers:
x86 http://www.mediafire.com/?qabo1tue2v1ky75 x64 http://www.mediafire.com/?8dl8s3l9mr6ggr9
Go on http://www.htcdev.com[4] and create yourself an account on HTCDEV.
Download these adb/fastboot files: http://d-h.st/RvD
Make a new folder anywhere. We'll use C:/fastboot as an example.
Extract the zip downloaded to the new folder
Go Here http://www.htcdev.com/bootloader/[6] and select "All Other Supported Models" and "then begin unlock bootloader" (check the boxes, click proceed, all that good stuff). YOU CAN IGNORE THE DIRECTIONS THAT THEY TELL YOU (and follow this guide instead).
Power off your phone. Power your phone on by holding power and volume down.
Highlight 'Fastboot' the volume buttons then press power to "select".
Plug your phone into your PC and open a Command Prompt. (windows XP - Click Start > Run > type CMD in box then press OK; Windows 7 - Click Start > type CMD in search box then press Enter) Change directory to your folder where we put fastboot files by typing cd c:\fastboot for example.*
*Alternatively, you can just hold down shift and right click in the folder and select "open command window here". Neat huh?
Type this into your command prompt window: fastboot oem get_identifier_token
Select & copy the text as per step 9 on the HTCDev website
Paste your identifier token into the box at the bottom and submit
You Will Very Shortly Receive an email from HTCDev with a link to the second part of the instructions and your "Unlock_code.bin" attached
Download the "Unlock_code.bin" from the email and save it to the same folder that we extracted fastboot files
Type this into your command prompt window: fastboot flash unlocktoken Unlock_code.bin
The Display Will change on your phone, press Vol+ to accept and power to confirm.
Part 2
Overview: flash your recovery. Boot into recovery. Turn phone off if it boots into OS. Boot into back into recovery. You're done!
Download a recovery:
TWRP (the one I use): http://forum.xda-developers.com/showthread.php?t=2173870
CWM 2: http://forum.xda-developers.com/showthread.php?t=2172979
CWM: http://forum.xda-developers.com/showthread.php?t=2173863
Place the Recovery file to the folder where the fastboot.exe is.
Same thing as above- boot (volume down + power) into the bootloader and highlight 'Fastboot' the volume buttons then press power to "select".
Do the same thing as with the command prompt above. This time, however, you'll be typing:
fastboot flash recovery "name_of_the_recovery.img"
For example:
fastboot flash recovery openrecovery-twrp-2.5.0.0-m7.img
then type:
fastboot erase cache
From the menu, boot into recovery (use volume to move up and down, power to select). The phone might boot to the OS instead of recovery, don't worry!
Turn off phone then turn on (while holding volume down) to boot back into the bootloader.
TAMPERED shows up, boot into recovery and now your recovery should be working!
Part 3- obtaining root
Overview: flash a super tool
Download a super user tool for root:
SuperSU (I use this one): http://forum.xda-developers.com/showthread.php?t=1538053
SuperUser: http://download.clockworkmod.com/superuser/superuser.zip
Alternatively, download this: http://forum.xda-developers.com/showthread.php?t=2252959. This is a stock rooted rom for ATT. If you download and flash this instead of the super user tool, you're done. (This rom includes super user) Or you can download a custom rom such as this one: http://forum.xda-developers.com/showthread.php?t=2183023
Turn on your phone again (and disable usb debugging) and connect to computer, copy the .zip super user tool to a location you remember ON the phone.
Flash it with the Recovery: Power off your device and then hold the VOL DOWN + Power to boot into the Bootloader Navigate with VOL and Power to Recovery Now flash the .zip:
- install zip from sdcard
- choose zip from sdcard
- select the downloaded SuperSU/SuperUser zip file and flash it
- Reboot now
You're not out of the woods yet! The stock kernel is system write protected, so you still can't modify it (changes won't "stick"). You'll have to flash a custom rom or a kernel if you want stock instead.
I recommend these kernels: http://forum.xda-developers.com/showthread.php?t=2255900 or http://forum.xda-developers.com/showthread.php?t=2233665&highlight=menu
Download it.
Installing custom rom/kernel ("flashing a rom")
Overview: Download Rom, boot into recovery and wipe and then flash.
According to Shenye, even though your device is s-on, you can still flash boot now. So just do this:
Turn on your phone again (and disable usb debugging) and connect to computer, copy the .zip kernel/cutom rom to a location you remember ON the phone.
Flash it with the Recovery: Power off your device and then hold the VOL DOWN + Power to boot into the Bootloader Navigate with VOL and Power to Recovery Now flash the .zip:
- install zip from sdcard
- choose zip from sdcard
- select the downloaded SuperSU/SuperUser zip file and flash it
- Reboot now
I feel like this title should be changed to clarify that it's unlocking the bootloader, not the SIM lock.
Just wanted to say this tutorial was 100% dead on and what I used to unlock bootloader and root/rom my One.
Oddity - Did everything, I've got root but I -AM- out of the woods. Was installing bulletproof mod through recovery but it kept failing due to missing a MD5 file or something -- Trying to work that out through that thread atm but anyway, rebooted the phone a couple of times now and I still have root, Tit back up works OR are we talking about things like CPU clocking won't work since it can't rewrite?
Sticking this.
Excellent tutorial. One thing to add:
If you flash the TWRP recovery you link to, after TWRP boots for the first time, if you reboot into System, TWRP will offer to install SuperSU for you; no need to find another to flash. Once the system reboots, you can launch the GUI installer to finish the SU install (it will boot into TWRP and back one more time to do the actual flash).
Does anyone know if this will work on the Rogers HTC One?
Thank you. Followed this last night. Worked flawlessly. The only thing that threw me was rebooting into recovery. It took maybe 3 or 4 reboots for it to say "TAMPERED" at the top. When it didn't say tampered, it would not boot to recovery.
TELUS?
DannySmurf said:
Excellent tutorial. One thing to add:
If you flash the TWRP recovery you link to, after TWRP boots for the first time, if you reboot into System, TWRP will offer to install SuperSU for you; no need to find another to flash. Once the system reboots, you can launch the GUI installer to finish the SU install (it will boot into TWRP and back one more time to do the actual flash).
Click to expand...
Click to collapse
Did you happen do run this tutorial on a TELUS device?
Viceroy_N said:
Does anyone know if this will work on the Rogers HTC One?
Click to expand...
Click to collapse
Yes it does. I have a Rogers phone, and it worked perfectly.
richnanaimo said:
Did you happen do run this tutorial on a TELUS device?
Click to expand...
Click to collapse
No, I have a Rogers device. But the procedure should not be any different.
followed step by step and got an error that says submitted token wrong length
I'm on ubuntu 13.04 and I get stuck at getting the token. I type in fastboot oem get unlock_identifier_token and it says waiting for device. Tried it with sudo and it says error and sudo ./fastboot and it says no such command.
Sent from my HTC One using xda app-developers app
Having a really odd problem. I flash the twrp recovery per instructions. I try to reboot to recovery and it seems to try and then, blam, the att boot.
I have tried this from the bootloader, selecting Recovery, as well as from a booted stated using "adb reboot recovery".
Any hints for me? I originally had a silver One and today got my Black One replacement,. Had no issues on the original one. Hmm. Guess I will try CWM.
FYI: Yes I unlocked the bootloader and it says Unlocked in there
-I also notice that I seem to go right into fastboot, when I boot the bootloader. Now, I believe that is normal if you have the usb cable attached, but this happens regardless.
-flashed stock recovery back and can get into it. trying twrp again, renaming the file to "recovery.img" just because...and it worked on that stock recovery file
-Also, very hard to get into bootloader from powered off state. I may flash RUU_M7_UL_JB_50_Cingular and see if it helps me.
OK, maybe it is the phone or ATT has done something screwy on the latest. I can not even get the RUU install to pass inspection. Wants me to check the connection. I know all my stuff is in order, as I did this all on the previous one. grrr
-Just noticed mine does say Unlocked but it does not say Tampered.
-Crazy. I decided to get a new Unlock token and redo the unlock with it. Now, the bootloader finally says Tampered and I got into TWRP. I have no idea why, since I would think that if the original Unlock token was incorrect, it would not have unlocked the phone.
So, rather than providing worthwhile information for anyone else having problems, I think this post is probably deletable and that is fine by me should the powers so decide.
How would one go back to locking the device for a return?!?
Sent from my Nexus 4 using xda premium
tacotino said:
How would one go back to locking the device for a return?!?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
fastboot oem lock
but, it will say relocked. nobody cares or seems to check. also, it will say tampered until you restore a stock ruu to flash. I used RUU_M7_UL_JB_50_Cingular.exe for mine when switching from silver to black. it is the right one for att. sorry, don't have the link to the download anymore.
great writeup! quick comment though, just helped my brother unlock his phone. i had a similar issue to @Barsky above so I decided to try to reflash the recovery. The first time I used the line fastboot erase cache after flashing the recovery and I think that's what caused it to not boot into recovery. The second time I flashed TWRP, I didn't enter that line and voila it worked on the first try!
can anyone post a mirror of the dev host files? devhost seems to be down.
nice...
help please
I seem to be stuck in recovery after installing super su/ rom. I messed up the order and did the rom then su. Any ideas on how I can get it to boot? I tried installing clean rom 2.5 and used the su file i found here ----> http://www.teamandroid.com/2013/03/17/root-htc-one-supersu-android-41-jelly-bean-tutorial/2/
any help is greatly appreciated... I just want my phone back
---------- Post added at 09:44 AM ---------- Previous post was at 09:36 AM ----------
also, i did hit factory reset under bootloader/fastboot screen (where it says tampered/unlocked),
mbroch89 said:
I seem to be stuck in recovery after installing super su/ rom. I messed up the order and did the rom then su. Any ideas on how I can get it to boot? I tried installing clean rom 2.5 and used the su file i found here ----> http://www.teamandroid.com/2013/03/17/root-htc-one-supersu-android-41-jelly-bean-tutorial/2/
any help is greatly appreciated... I just want my phone back
---------- Post added at 09:44 AM ---------- Previous post was at 09:36 AM ----------
also, i did hit factory reset under bootloader/fastboot screen (where it says tampered/unlocked),
Click to expand...
Click to collapse
I think the last bit was your problem. You can't factory reset from bootloader. Try to push twrp again in fastboot then load/flash clean romantic, then boot up. It already has root so you don't need to push su.
Sent from my HTC One X using xda app-developers app

Help!!! My Rezound got bricked!! :'(

Ok... This is my 4th android phone.. And I love this phone... And only had it for a week.... and just now got it bricked.... here's what happen... Today I tried to flash a sense 4.1 rom, but im so new at this, and I'm half way done, and I went in a rush because I was nervous, and I accidentally press "install and keep data" and that was my mistake. I factory reset it b4 so I tried to flash it... So I thought it wouldn't be a problem. So I waited till the phone finish flashing. And when I rebooted the phone.... Nothing happened, just stuck on the white screen.... vibrating and etc... And I tried to restore all my data in clockworkmod recovery like I never even tried flashed it.. and it kept saying "won't mount sd card" and I tried to clear my cache/dalvik-cache, and like it still wont fix the issue. I even tried to restore wat I backup b4 I tried to flash it... and It was gone!!! Even my windows 8 laptop won't even detect my resound nor my sd card(unless its on a different android). But How can I fix my Rezound?!? plzzzz How can I fix this soft bricked issue? pllzzzzzzz help!!!
Im assuming you already have adb installed
Download this file
http://www.mediafire.com/download/oa2sjlvrecx0wdn/recovery-ra-vigor-3.16-gnm.img.zip
Extract the recovery img
Put it in the adb folder
Load into fastboot
Open up the terminal
Put "cd" then hit space
Drag and drop the adb folder into the terminal window then hit enter
Now use this command to flash that recovery "fastboot flash recovery recovery.img" (without the quotation marks)
Now go into recovery Find "format data system cache ect."
Go to format all to ext3 once that is done hit return
Flash your prefered rom from the flash menu and all that
Once you are done return to the main menu and go to "developer menu"
Then reboot to bootloader
Now go into your rom that you downloaded on your pc and find the rom now open it and get the boot.img
Copy the boot.img file to your adb folder
Open up terminal again and this time use the command "fastboot flash boot boot.img" in terminal its going to say sending then writing usually takes a couple of seconds
now just go to the reboot option and your rom should work
Now remember that since you are s on you need to get the boot.img file from EVERY rom you install and flash it thru the terminal in order to get your rom working
xkjonathanxk said:
Im assuming you already have adb installed
Download this file
http://www.mediafire.com/download/oa2sjlvrecx0wdn/recovery-ra-vigor-3.16-gnm.img.zip
Extract the recovery img
Put it in the adb folder
Load into fastboot
Open up the terminal
Put "cd" then hit space
Drag and drop the adb folder into the terminal window then hit enter
Now use this command to flash that recovery "fastboot flash recovery recovery.img" (without the quotation marks)
Now go into recovery Find "format data system cache ect."
Go to format all to ext3 once that is done hit return
Flash your prefered rom from the flash menu and all that
Once you are done return to the main menu and go to "developer menu"
Then reboot to bootloader
Now go into your rom that you downloaded on your pc and find the rom now open it and get the boot.img
Copy the boot.img file to your adb folder
Open up terminal again and this time use the command "fastboot flash boot boot.img" in terminal its going to say sending then writing usually takes a couple of seconds
now just go to the reboot option and your rom should work
Now remember that since you are s on you need to get the boot.img file from EVERY rom you install and flash it thru the terminal in order to get your rom working
Click to expand...
Click to collapse
If you are S-ON, you are likely not bricked, it's almost impossible to completely brick when you are S-ON.
Why do people keep telling occasional flashers that are S-ON to do this?!?!? It is the hard way, also don't use Amon Ra, is it outdated and known to cause issues with current ROMs, use TWRP or CWM recovery!!! Also, verify your ROM is specifically for the HTC Rezound, check the Developer threads here and make sure it is stable and widely used unless you really know what you are doing.
Although xkjonathanxk is on the right track, he is making more complicated than it needs to be...
- Download the first link in the first post of this thread and place it on the root of your SD card: [Tool] - 3/24 - CleanWIPE 1.0 - Wipe 5 or 10x before ROM install! - 1heffer Edition! (CleanWIPE formats all the necessary partitions for you, and prepares the phone for a new ROM)
- Download TWRP or CWM Rececovery (one of the first two links in post 1) and extract the recovery*.img and place it in the adb folder that contains fastboot.
- Download a tested and verified ROM of choice and place it on the root of your SD card
- Now, reboot into fastboot, remove battery and hold down Power and Vol Dn, once the menu comes up select Fastboot and press power, connect phone to PC
- In ADB enter the command "fastboot devices", if it shows a device continue, if not report back please
- Now enter the command "fastboot boot recovery.img" and TWRP (or CWM) should open on the device in a few seconds (replace recovery.img with whatever the name of the xxxx.img file is from TWRP or CWM archive)
- Install the CleanWIPE zip from above
- Install ROM zip image
- Reboot and enjoy the goodness
Remember to give the ROM some time to settle down on the first boot, and that the first boot can take a long time, like a painfully wrong "WTF did I do to ruin my device!" long time, but give it a solid 10 minutes before doing anything else.
@acejavelin
acejavelin said:
If you are S-ON, you are likely not bricked, it's almost impossible to completely brick when you are S-ON.
Why do people keep telling occasional flashers that are S-ON to do this?!?!? It is the hard way, also don't use Amon Ra, is it outdated and known to cause issues with current ROMs, use TWRP or CWM recovery!!! Also, verify your ROM is specifically for the HTC Rezound, check the Developer threads here and make sure it is stable and widely used unless you really know what you are doing.
Although xkjonathanxk is on the right track, he is making more complicated than it needs to be...
- Download the first link in the first post of this thread and place it on the root of your SD card: [Tool] - 3/24 - CleanWIPE 1.0 - Wipe 5 or 10x before ROM install! - 1heffer Edition! (CleanWIPE formats all the necessary partitions for you, and prepares the phone for a new ROM)
- Download TWRP or CWM Rececovery (one of the first two links in post 1) and extract the recovery*.img and place it in the adb folder that contains fastboot.
- Download a tested and verified ROM of choice and place it on the root of your SD card
- Now, reboot into fastboot, remove battery and hold down Power and Vol Dn, once the menu comes up select Fastboot and press power, connect phone to PC
- In ADB enter the command "fastboot devices", if it shows a device continue, if not report back please
- Now enter the command "fastboot boot recovery.img" and TWRP (or CWM) should open on the device in a few seconds (replace recovery.img with whatever the name of the xxxx.img file is from TWRP or CWM archive)
- Install the CleanWIPE zip from above
- Install ROM zip image
- Reboot and enjoy the goodness
Remember to give the ROM some time to settle down on the first boot, and that the first boot can take a long time, like a painfully wrong "WTF did I do to ruin my device!" long time, but give it a solid 10 minutes before doing anything else.
Click to expand...
Click to collapse
I really appreciate your help and everything. So i thank you. But Like i said im running windows 8, it wont detect my rezound or my sd card, the only time the pc is able to detect the sd card is when im able to mount my sd card to CWM. But it really wont detect it.... help me again
Multidex24 said:
I really appreciate your help and everything. So i thank you. But Like i said im running windows 8, it wont detect my rezound or my sd card, the only time the pc is able to detect the sd card is when im able to mount my sd card to CWM. But it really wont detect it.... help me again
Click to expand...
Click to collapse
Ubuntu Live CD... Windows not required.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
Dont know how to work ubuntu.. help again
acejavelin said:
Ubuntu Live CD... Windows not required.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
Click to expand...
Click to collapse
lol its the good thing i know how to make a dual os between win8 and ubuntu, but heres another problem, i dont even know how to work ubuntu...
i think my pc can detect the rezound. But idek how to work ubuntu, plzzzz help!!
Multidex24 said:
lol its the good thing i know how to make a dual os between win8 and ubuntu, but heres another problem, i dont even know how to work ubuntu...
i think my pc can detect the rezound. But idek how to work ubuntu, plzzzz help!!
Click to expand...
Click to collapse
For the things you need to do, its not much different than Windows. Download and install adb, copy images to same places, and the commands are pretty much the same. If you can dualboot you obviously have some knowledge of such things.
If this is all do difficult, just grab a thumb drive, put mini-adb, recovery.img, and your ROM on it and go to a buddies computer with Win7 for 20 minutes and get it done that way.
I know this seems like a huge, potentially fatal problem, but it is minor...
Another thought I had... Download TWRP, go into CWM recovery and copy the TWRP file and ROM to the sd card, and FLASH TWRP recovery ZIP with CWM recovery, reboot into recovery and you will then be on TWRP and you can use TWRP's HTC Dumlock to flash the ROM and the boot.img without a PC at all... In theory, it should work.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app

[Q] noob needs help here pls :P

i am very excited about the android L update...but will we be able to receive the update via OTA even if we are rooted and bootloader is unlocked...i asked the Motorola guy....he said "i have no idea about it"........so just need answers.....if yes cool....if no what can i do to get the update????
kebby_rxx9 said:
i am very excited about the android L update...but will we be able to receive the update via OTA even if we are rooted and bootloader is unlocked...i asked the Motorola guy....he said "i have no idea about it"........so just need answers.....if yes cool....if no what can i do to get the update????
Click to expand...
Click to collapse
OTA updates can be received even if the bootloader is unlocked but you will have to unroot the phone and restore stock recovery for getting updates.
For unrooting
1.Open SuperSU
2.Tap on SettingsChoose*Full unroot*under*Cleanup.
3. Tap on Continue.Wait a few seconds as SuperSU un-registers and removes itself.
For flashing stock recovery
1. Go to http://sbf.droid-developers.org/phone.php?device=34
to download your required firmware.
2. Extract the zip and copy the recovery.img to desktop
3. Download mfastboot drivers from
https://docs.google.com/file/d/0B4PT9WP-u_z9NXRBWF9EV2lGcWs/preview
4. Extract the mfastboot zip in a folder
5. Copy and paste the recovery.img from desktop to mfastboot folder
6. Turn off phone and press and hold Volume Down button and then press Power Button. Your phone will be booted in fastboot menu.
7. Connect your Moto E to PC / laptop using USB cable and Open mfastboot folder.
8. On pc press Shift key and right click on empty space in folder and choose to open Command window here.
9. Type following command in command prompt and press enter key after the command:
mfastboot.exe flash recovery recovery.img
10. Reboot
Now you will b able to get ota updates
Hit thanks if helped!!
You can receive updates even if you're rooted and bl unlocked.
Just remember, your system files(apps) should not be modified.
You can even flash it using custom recovery if you want to flash it manually.
But it you wish it to install automatically, for that you will need stock recovery.
There are guides in the general section that explains the process, give a read.
Tapatalk with RAZR HD
thx fa the info
ill try unrooting it as soon as the update is released.....soo excited

Categories

Resources