One flaw with Smart Stay - Galaxy S III Q&A, Help & Troubleshooting

Smart Stay generally seems good, but the one major flaw I've noticed is that when you're reading towards the bottom of a page the detection seems to break down.

i cant get it to wOrk

vinuneuro said:
Smart Stay generally seems good, but the one major flaw I've noticed is that when you're reading towards the bottom of a page the detection seems to break down.
Click to expand...
Click to collapse
You must be holding it wrong!
But seriously, although its what Samsung said, SmartStay isn't actually activated by you looking at the phone. It just has to detect the presence of a face. Even with my eyes closed, or my head turned in another direction not looking at the screen, it still keeps the screen awake if my face is within view.
You must be holding it in a way that it doesn't detect your face anymore.

When I play shift on phone.. After 2-3 mins it automatically shuts the screen of coz it doesn't requires touch
Sent from my GT-I9300 using Tapatalk 2

Related

[Q] 3VO Durability

Hello
I'm wondering just how durable an E3D is, namely the touch sensors inside it.
Recently I dropped the phone twice on a hard surface, and started noticing strange behaviours, firstly with the touch functions and secondly with the phone always freezing up.
Not always, but sometimes when typeing, it's just a mess, the capitalizer writes a letter, multi letter feature is inaccessible, basically none of the characters work like they were ment to. The only solution thus far is to lock and unlock the phone, which fixes the keyboard and the touch functionality.
Sometimes I can't unlock the phone because the ring moves 3 times shorter of a distance, opposed to when its working properly, and if so you can forget about dragging icons into the circle to answer a call, it just won't go in all the way.
Oh and the freezes, completely, none of the touch sensitive buttons or the screen responds, sometimes the screen is the only responsive part while the buttons are completely dead, a lock/unlock is needed to fix it short term, also the buttons led go out, becoming none responsive, sometimes the led is off, yet I still get a vibrational feedback (Have it enabled) So all these irregularities are new, it never happened before dropping the phone! The only touch sensitive related issue I had before, from time to time, was the unlock pattern gesture not tracing, instead of sticking to the first circle I begin at, it moves to the next I drag my finger over. (also fixable by relock/unlocking)
During this post the keyboard wasn't acting up thankfully, but its getting more and more irritating to lock and unlock the phone while typing a message to someone.
First I was suspecting a virus, or low memory causing this behaviour, but after thoroughly cleaning the phone and acquiring more memory (by closing apps) I was still having the problem.
Any idea how sensitive the components are if subject to repeated shock from a distance of 1.5m or 5ft?
What are my options here if the irregularities persist?
G4m3rHead said:
Hello
I'm wondering just how durable an E3D is, namely the touch sensors inside it.
Recently I dropped the phone twice on a hard surface, and started noticing strange behaviours, firstly with the touch functions and secondly with the phone always freezing up.
Not always, but sometimes when typeing, it's just a mess, the capitalizer writes a letter, multi letter feature is inaccessible, basically none of the characters work like they were ment to. The only solution thus far is to lock and unlock the phone, which fixes the keyboard and the touch functionality.
Sometimes I can't unlock the phone because the ring moves 3 times shorter of a distance, opposed to when its working properly, and if so you can forget about dragging icons into the circle to answer a call, it just won't go in all the way.
Oh and the freezes, completely, none of the touch sensitive buttons or the screen responds, sometimes the screen is the only responsive part while the buttons are completely dead, a lock/unlock is needed to fix it short term, also the buttons led go out, becoming none responsive, sometimes the led is off, yet I still get a vibrational feedback (Have it enabled) So all these irregularities are new, it never happened before dropping the phone! The only touch sensitive related issue I had before, from time to time, was the unlock pattern gesture not tracing, instead of sticking to the first circle I begin at, it moves to the next I drag my finger over. (also fixable by relock/unlocking)
During this post the keyboard wasn't acting up thankfully, but its getting more and more irritating to lock and unlock the phone while typing a message to someone.
First I was suspecting a virus, or low memory causing this behaviour, but after thoroughly cleaning the phone and acquiring more memory (by closing apps) I was still having the problem.
Any idea how sensitive the components are if subject to repeated shock from a distance of 1.5m or 5ft?
What are my options here if the irregularities persist?
Click to expand...
Click to collapse
Don't know how durable it is...but I too face the unlock pattern issue sometimes, IMO it is a software issue .. Also if you take too much time to draw the pattern the screen goes off (even if you keep your fingers touched)......
The only solution thus far is to lock and unlock the phone, which fixes the keyboard and the touch functionality.
Click to expand...
Click to collapse
If a reboot fixes the problem, then it's not hardware, its a software problem. Do a factory reset.
Recently I dropped the phone twice on a hard surface,
Click to expand...
Click to collapse
Dropping your phone will usually cause hardware problems. Get a case or don't drop the phone anymore.
First I was suspecting a virus
Click to expand...
Click to collapse
There are no android viruses.
but after thoroughly cleaning the phone and acquiring more memory (by closing apps) I was still having the problem.
Click to expand...
Click to collapse
DON'T use task killers or force close apps, that only makes things worse, and is probably what is causing your problem.
sitlet said:
If a reboot fixes the problem, then it's not hardware, its a software problem. Do a factory reset.
Dropping your phone will usually cause hardware problems. Get a case or don't drop the phone anymore.
There are no android viruses.
DON'T use task killers or force close apps, that only makes things worse, and is probably what is causing your problem.
Click to expand...
Click to collapse
Well when app's foreclose there isn't much to do but close them ?
The task killer, well, I don't really use it much, I just have it, its called eRay..
Sent from my HTC EVO 3D X515m using XDA
sitlet said:
If a reboot fixes the problem, then it's not hardware, its a software problem. Do a factory reset.
Click to expand...
Click to collapse
It's not a reboot, just a lock/unlock of the screen/phone..
Sent from my HTC EVO 3D X515m using XDA
What on Earth is a 3vo!? Is it anything like an iphone 4!?
joehunni said:
What on Earth is a 3vo!? Is it anything like am iphone 4!?
Click to expand...
Click to collapse
An 3VO or E3D are abbreviations for the EVO 3D from HTC
Sent from my HTC EVO 3D X515m using XDA
Here's an update on this issue...
I've noticed that the upper left corner is the cause. How?
Well, in landscape mode on my homescreen, trying to pull the notification bar down (then from, the bottom left since were in landscape) will instead (without any animation) try to go to full homescreen view where I see all my 7 homescreen, but it does it in a zoom like feature, where the more I pull it to the side the more it will zoom in until final animation frame is reached LMAO.. I'm actually crying...
The sensor might be off, in that corner of the screen as dropped phone tend to land/hit the corners first...
I should ask an xda dev. to cook me up a "sensor status check" app to check if any of them are functioning incorrectly..
I don't know what more then that I could do?!..
Sent from my HTC EVO 3D X515m using XDA
Hey guys, thought I drop my final verdict on this issue.
As you all (who read this thread) knows, I was having an irritating problem with my E3D, namely the touch functionality of the screen was messed up, but only in a certain area, where I thought the sensors got discalibrated from the drops the Phone went through on hard surfaces.. I have used an app called "Check My Android" and the feature "MultiTouch" to identify the spot on the screen, where if I touched, a daemon took over my phone and started all kinds of wired behaviour such as item triggers on the other side of the screen and freezing, even slow mo zooming of the homescreen, one touch passive zooming of webpages and so forth..
Now with that app, I was certain that everything with it is not in order, but I didn't have the slightest clue on what to do about it. I ran across a comment about the built in utility diagnostics tool code for the Phone while browsing on U2B (YouTube), so by typing "*#*#3424#*#*" (which starts as you enter the lasts star) will basically allow you to test every aspect of functionality of your phone, where i also went for the screen draw test, and found myself strengthening what I already thought was the problem "an area on the screen messing everything else up" as I pressed within this area I found a straight line jump, from the "dead zone" to the bottom middle of the screen, as I was drawing circles, it drew a straight line there as i went over it with my finger every time. Than browsing on after that code's discovery, for "EVO 3D touchscreen problems" I ended up on a video offering similar problems..
Now the breakthrough or rather yet the solution came from that videos second and only comments, saying how "Disabling the ScreenLock of the Phone would fix that problem" and so it did!!! I'm not having any disturbance while typing, flipping pages touching that area or anything out of the ordinary, otherwise the Phone was almost unusable. It let's me to believe its a software miscoading flaw, but it wasn't always like that even though I used the screenlock since day one, so I'm not entirely sure what's up? other than its fixed...
I hope this fix can relieve others just as it did me
And the diagnostics code is also useful.. should be stickyd :]
Sent from my HTC EVO 3D X515m using XDA
G4m3rHead said:
Hey guys, thought I drop my final verdict on this issue.
As you all (who read this thread) knows, I was having an irritating problem with my E3D, namely the touch functionality of the screen was messed up, but only in a certain area, where I thought the sensors got discalibrated from the drops the Phone went through on hard surfaces.. I have used an app called "Check My Android" and the feature "MultiTouch" to identify the spot on the screen, where if I touched, a daemon took over my phone and started all kinds of wired behaviour such as item triggers on the other side of the screen and freezing, even slow mo zooming of the homescreen, one touch passive zooming of webpages and so forth..
Now with that app, I was certain that everything with it is not in order, but I didn't have the slightest clue on what to do about it. I ran across a comment about the built in utility diagnostics tool code for the Phone while browsing on U2B (YouTube), so by typing "*#*#3424#*#*" (which starts as you enter the lasts star) will basically allow you to test every aspect of functionality of your phone, where i also went for the screen draw test, and found myself strengthening what I already thought was the problem "an area on the screen messing everything else up" as I pressed within this area I found a straight line jump, from the "dead zone" to the bottom middle of the screen, as I was drawing circles, it drew a straight line there as i went over it with my finger every time. Than browsing on after that code's discovery, for "EVO 3D touchscreen problems" I ended up on a video offering similar problems..
Now the breakthrough or rather yet the solution came from that videos second and only comments, saying how "Disabling the ScreenLock of the Phone would fix that problem" and so it did!!! I'm not having any disturbance while typing, flipping pages touching that area or anything out of the ordinary, otherwise the Phone was almost unusable. It let's me to believe its a software miscoading flaw, but it wasn't always like that even though I used the screenlock since day one, so I'm not entirely sure what's up? other than its fixed...
I hope this fix can relieve others just as it did me
And the diagnostics code is also useful.. should be stickyd :]
Sent from my HTC EVO 3D X515m using XDA
Click to expand...
Click to collapse
Never mind that, it was only a temporary fix, as it started doing it again after a while...
Try calibrating your screen via display settings if you haven't already. Also are you having just touch screen issues or are reboots part of the issue as well ??
#Root-Hack_Mod*Always\
laie1472 said:
Try calibrating your screen via display settings if you haven't already. Also are you having just touch screen issues or are reboots part of the issue as well ??
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
It's screen issues only, no reboot problems yet..
I have calibrated the G-Sensor several times...
In another post someone replied, that its a grounding issue, and trying that once it did give a result, but then again, I'm not having that, unusable level of the issue I was having, after a hard reset.. so I'm not really sure weather this is a grounding problem, an app caused problem, all I know is that I still get an extra touch input on the screen, when I approach the upper left corner.. with every multi touch app I test..
Have you tried that app called touch screen booster ??? If not give it a shot. Set the multi touch point settings to two. Then apply then start the service and select run at boot. Then reboot and see if it helps any. Also a way of trouble shooting to find out if it is a rogue app is to Uninstall all of your apps. Then see if you still have the issue.
#Root-Hack_Mod*Always\
laie1472 said:
Have you tried that app called touch screen booster ??? If not give it a shot. Set the multi touch point settings to two. Then apply then start the service and select run at boot. Then reboot and see if it helps any. Also a way of trouble shooting to find out if it is a rogue app is to Uninstall all of your apps. Then see if you still have the issue.
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
Yes i have, thanks to you, but it was futile. Had no impact what so ever...
It's handed in for repairs, so I'll know what it was soon..
G4m3rHead said:
Yes i have, thanks to you, but it was futile. Had no impact what so ever...
It's handed in for repairs, so I'll know what it was soon..
Click to expand...
Click to collapse
Bummer. Well at least you'll get it back fixed.
#Root-Hack_Mod*Always\
are you running any of the custom kernels? If I run why kennel besides stock I get the exact same behavior
Sent from my PG86100 using XDA
punkerEVO said:
are you running any of the custom kernels? If I run why kennel besides stock I get the exact same behavior
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
No i have not rooted, i was waiting for the official ICS before i root.
So I'm on the Stock... everything lol
This is my second 3D. The first one stopped responding to touches. Sprint replaced it for $30 even though I bought it from wirefly.
In my own experience, I had the exact same symptoms. Only difference is I didn't even drop my phone. After a few months of owning the phone it started to show the aforementioned symptoms occasionally. Eventually, it just got worse. After a lot of forum searching, google searching, etc, it turned out to be the digitizer that was faulty. I had tried everything from flashing different ROMs, Kernels etc before I was finally able to narrow it down to a hardware issue. The digitizer seems to be an issue for a lot of 3VOs from what I understand.
Luckily I had a friend who replaced the entire front housing of my phone so I wouldn't have to exchange it since I was unlocked on HBOOT 1.40. At the time I was afraid that, had I gotten it replaced, I'd have to deal with Hboot 1.50 and HTC's half ass unlock method. Either way, after that it was like a brand new phone but better cuz I didn't have to redownload apps, etc since the motherboard and software weren't touched at all.
Hope it all works out for ya... G'luck, brothah!
Sent from my PG86100 using XDA
Shame I hadn't seen this thread sooner, I could have saved you a lot of time. I am on my 3rd 3d. Basically any fall which lands on the touchscreen will cause this problem.
What makes it worse, I was rooted with my last phone, and when it happened, I had to unroot before I could take it in for repairs. The touchscreen was so badly damaged with this problem, I could hardly do anything.
TL;DR get a case that will cover the screen and protect it from flat on touchscreen falls.

Smart stay.

I've been using my sgs3 with smart stay enabled and noticed it doesn't seem to be sensing me looking at it.. I wear glasses.. and I'm wondering if this is a limitation ?
Sent from my GT-I9300 using Tapatalk 2
I also wear glasses and i find it works fine for me. Remember it doesnt work in low lights.
I Just tested it and it's not working without glasses on either. I see the 'eye' in the notification bar flash after 15 seconds, then it dims the screen, then again 5 seconds later and then screen switches off.
I've had smart stay enabled since day 0 and the phones had a few power cycles/reboots.
Sent from my GT-I9300 using Tapatalk 2
Doesn't work for me with my glasses on or off. Must be my face!
doesn't work for me either. not smart
maybe the galaxy just doesn't like your faces?
maybe that's what samsung meant with it being smart. hehe
seriously i have read somewhere it is the face it is tracking not just the eyes.
It even worked when my Dogs were looking at at a few times, and it's annoying because often I put phone off to the side not looking at it and still stays on and wasting battery.
I'm sorry, I didn't realise Samsung required users to look like dogs for this feature to work.
I'm thinking of flashing a custom Rom anyhow.. be interesting to see f it works on another Rom.
Sent from my GT-I9300 using Tapatalk 2
stuart.tavener said:
I'm sorry, I didn't realise Samsung required users to look like dogs for this feature to work.
I'm thinking of flashing a custom Rom anyhow.. be interesting to see f it works on another Rom.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Well I do look a bit Ruff.
I just got my Galaxy. Seem to have the same issue, it's not working. Well I think there will be a software update soon enough.
If I consciously blink every so often I'm able to keep the screen on, but if I don't move or blink it turns off - at least that's how it seems to me.
Can't really get it working consistently yet.
I've had my phone since launch and it dimms but never turns off. I wear both glasses and contact lenses.
If the front camera is.nt pointed towards your face it may turn off however which is annoying sonetimes
Sent from my GT-I9300 using Tapatalk 2
Hi,
I got smart stay working!
I opened the camera, switched to front facing and positioned the camera so that my face was in the centre of the screen and taking up about 50% of the area.
Now when switching to home screen the little eye kept popping up and going away and the screen stayed on!
Paul
I noticed it works flawless. I have it set too 30 seconds.
Sent from my GT-I9300 using xda premium
Great
I find it very useful and works great, I don't wear glasses and I'v only had it two days but does as expected, I can look at it for 10 minutes and it won't turn off, if i point it away from me it turns off after my timeout.
I found if I closed my eyes and squinted one eye a tiny bit open it still didn't turn off though, but it's not like I'm playing hide and seek with it.
alias_neo said:
I found if I closed my eyes and squinted one eye a tiny bit open it still didn't turn off though, but it's not like I'm playing hide and seek with it.
Click to expand...
Click to collapse
Ha, that sounds like something I would do!
alias_neo said:
I found if I closed my eyes and squinted one eye a tiny bit open it still didn't turn off though, but it's not like I'm playing hide and seek with it.
Click to expand...
Click to collapse
Doesn't work for me
when i watch the screen, the screen didn't turn off, -> ok, this is work
but then i closed my eyes about 2 minutes, then when I opened my eyes, the screen didn't turn off
It works for me. I don't wear glasses though.
Correction, it has problems in landscape mode.
Sent from my GT-I9300 using xda premium
I find it is a mixed bag. It rarely turns off when I am looking at it. But on lots of apps the screen dims meaning I have to touch the screen anyway. This rather defeats the point if you ask me!
Sent from my GT-I9300 using Tapatalk 2

screen calibration

Is there a way to "re-calibrate" the screen or change the sensitivity?
I have found that when I need to press a button near the corner of the screen, (like on a friendstream widget to refresh), I usually have to press it several times or use my pinky.
I'm thinking either the "alignment" is off or the sensitivity needs to be tweaked (maybe my fingers are too big)
When I first started typing on the Inc 4G, I noticed that sometimes it seemed like it was missing letters I was typing. As I started using it more, I realized that my hand was barely touching the corner of the screen next to the recent apps button, since I was used to using a small phone, the original Incredible. However, once I realized I was doing that, I stopped doing it. I have to consciously make the decision to stop every time I notice myself doing it. I've only been using it for a couple days, but I'm doing it less now, so hopefully I'll stop completely soon. I don't understand why it thinks the corner of the screen should be touch sensitive, because it's almost a full centimeter away from the recent apps button.
IceDragon59 said:
When I first started typing on the Inc 4G, I noticed that sometimes it seemed like it was missing letters I was typing. As I started using it more, I realized that my hand was barely touching the corner of the screen next to the recent apps button, since I was used to using a small phone, the original Incredible. However, once I realized I was doing that, I stopped doing it. I have to consciously make the decision to stop every time I notice myself doing it. I've only been using it for a couple days, but I'm doing it less now, so hopefully I'll stop completely soon. I don't understand why it thinks the corner of the screen should be touch sensitive, because it's almost a full centimeter away from the recent apps button.
Click to expand...
Click to collapse
interesting, I'll have to keep an eye on that.
but I'm trying to hit a small button on the top right corner of the screen.
I have the issue I mentioned before when I'm holding the phone in landscape mode with the capacitive buttons on the right, the base of my index finger where it meets my hand barely touches the screen about a centimeter above the recent apps button. I don't use the FriendStream widget, as I don't use social networks at all, but if the button is too small, it may be that your fingers are too big, but more likely you are touching the screen somewhere else. I only figured it out when I took my right hand away from the screen and was still typing with my left and the keys were working much easier for me.
Try taking the hand you're not using to press the button and put it on the bottom of the phone to hold it steady, then, using your other hand, only touch the screen where the refresh button is with your largest finger and see if it works. It may seem like really basic troubleshooting, but sometimes that's the way to go.
Failing that, try to go to Settings -> Language & keyboard -> HTC Sense Input -> Advanced settings -> Calibration tool
It only lets you type in portrait mode, which is kinda dumb since most typing is done in landscape mode, at least for me. It would be nice to at least have an option to do it in landscape.
Anyway, I hope one of these solutions helps.
can use this.
andybones said:
can use this.
Click to expand...
Click to collapse
The app you linked is difficult to use. I have to press it so hard that my screen does the LCD ripple thing mentioned in the other thread.
IceDragon59 said:
The app you linked is difficult to use. I have to press it so hard that my screen does the LCD ripple thing mentioned in the other thread.
Click to expand...
Click to collapse
no this isn't true.
you don't have to press hard, you have to press in the correct spot...
this phone's display is tough to get used to.
prime example, trying to exit out of a single app in the stock task manager, is very tough, and always opens the app instead of hitting the x, it's annoying, but it's worth it, IMO
but here is a vid showing that I have zero difficulties going through the set-up.
that and a little teaser of the ROM Nitsuj17 and I are working on
http://www.youtube.com/watch?v=GPfzJmnBJXg
andybones said:
no this isn't true.
you don't have to press hard, you have to press in the correct spot...
this phone's display is tough to get used to.
prime example, trying to exit out of a single app in the stock task manager, is very tough, and always opens the app instead of hitting the x, it's annoying, but it's worth it, IMO
but here is a vid showing that I have zero difficulties going through the set-up.
that and a little teaser of the ROM Nitsuj17 and I are working on
http://www.youtube.com/watch?v=GPfzJmnBJXg
Click to expand...
Click to collapse
Well, I was having difficulties using it. I don't have fat sausage fingers, and I even tried using my pinky finger and pressing directly on it and everything after the first dot just didn't work unless I pressed very hard on it. Now that I've used it once and calibrated it, it works much easier doing it again. Perhaps it was just that the factory default calibration for my phone is just that off.
IceDragon59 said:
Well, I was having difficulties using it. I don't have fat sausage fingers, and I even tried using my pinky finger and pressing directly on it and everything after the first dot just didn't work unless I pressed very hard on it. Now that I've used it once and calibrated it, it works much easier doing it again. Perhaps it was just that the factory default calibration for my phone is just that off.
Click to expand...
Click to collapse
the directions say press and HOLD..
lol, gotta read the directions my friend.
andybones said:
the directions say press and HOLD..
Click to expand...
Click to collapse
lol. I read that. I was pressing and holding for 5+ seconds with normal pressure, and it took 3+ seconds with lots of pressure. After doing this the second time, I didn't even have to hold more than 1 second under normal pressure.
IceDragon59 said:
lol. I read that. I was pressing and holding for 5+ seconds with normal pressure, and it took 3+ seconds with lots of pressure. After doing this the second time, I didn't even have to hold more than 1 second under normal pressure.
Click to expand...
Click to collapse
ahh, sorry about that
weird.. wonder if something is wrong with ur touchscreen
andybones said:
ahh, sorry about that
weird.. wonder if something is wrong with ur touchscreen
Click to expand...
Click to collapse
Could be. Something's definitely wrong with my Weather app.
IceDragon59 said:
The app you linked is difficult to use. I have to press it so hard that my screen does the LCD ripple thing mentioned in the other thread.
Click to expand...
Click to collapse
Something definitely wrong with your screen then. Works like a champ for me.
Sent from my ADR6410LVW using Tapatalk 2

Tip for increasing knockON success rate

What I found out is that the timing of the two knocks is less important, what is more important is to keep the finger on the screen after the second knock. After the second knock just keep it on the screen until you see the LED lights up, and you'll see how more efficient it will become.
Im tapping on every other device since I have my LG!
Sent from my Nexus 7 using Tapatalk 4
i go knock knock knock, it almost always helps.
Noam23 said:
What I found out is that the timing of the two knocks is less important, what is more important is to keep the finger on the screen after the second knock. After the second knock just keep it on the screen until you see the LED lights up, and you'll see how more efficient it will become.
Click to expand...
Click to collapse
Excellent information; exactly what I was looking for. Thanks!
Yeah works good so far!
Gesendet von meinem LG-D802 mit Tapatalk 4
I noticed most of the time when Knock On fails for me is because the phone isn't on a solid flat surface for example while I'm holding it in my hand or while it's on my bed.
This makes me think the accelermeter is used for this feature. So if you have too much "suspension", it won't trigger.
Just my thoughts!
Edit: I just tested with incredibly light touches and it still worked so perhaps it isn't accelerometer enabled. =S
amankapoor4 said:
i go knock knock knock, it almost always helps.
Click to expand...
Click to collapse
yeah, i hear if you say "knock knock" out loud as you do it, it works EVERY time.
Sent from my LG G2 using Tapatalk Pro
Great tip
Exactly what i was looking for although still a bit slow compared with what i had with my Nexus 4 and the touch control app. But at least I just do Knock knock once.
That really does work everytime.
Nice tip. I have been playing around with suggestions that I have seen elsewhere but yours seems to be the most consistent (I've done it 25+ times now in a row with your technique). I've even tried changing the rate at which I do the knocks (fast versus slow) and have also tapped on different parts of the screen. It seems like the key is leaving your finger on the screen on the second knock.
Previously some things that I read to increase the success rate were (each with mixed results):
- Always tap on the top of the phone (where the notification bar would be)
- Always tap three times instead of two
- Tap once and then pause slightly and then tap twice
On a side note, does anyone know how this feature works exactly? Is it simply the digitizer detecting the taps on the screen or is there something else going on?
I tried tapping on the back of the phone. This didn't work so the at least use the touchscreen for the knock knock feature.
Sent from my LG-D802 using xda app-developers app
LoL
Sent from my LG-D801 using xda app-developers app
kamiel said:
I tried tapping on the back of the phone. This didn't work so the at least use the touchscreen for the knock knock feature.
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
Ya, after doing some more testing, it must be the touchscreen. The reason I thought it may have been something else is I have gotten it to work by tapping in the top right corner of the phone (presumably not on the screen) but that's probably b/c the bezel is so small. I haven't been able to get it to work along the bottom of the phone (over the LG logo).
amankapoor4 said:
i go knock knock knock, it almost always helps.
Click to expand...
Click to collapse
This! Works 99.9% of the time for me
---------- Post added at 11:51 AM ---------- Previous post was at 11:47 AM ----------
Fraxon said:
Im tapping on every other device since I have my LG!
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
This as well!!!
I hate it bc that's how I was when the first iPhone came out...made me want to pinch to zoom my laptop screen. Now I find myself tapping the iphone or laptop to unlock but get mad when they don't lol
Knock On feature to turn screen on doesn't work if proximity sensor is covered (try to cover it and tap the screen - it will stay off). Also phone needs a short while to detect the sensor is not covered anymore. So if you pull out your phone out of a pocket and immediately try to turn screen on it simply won't work at first try. Second usually does the job. I've never really had a problem with unlocking the phone while it's on the table or something, when the sensor isn't (or wasn't two seconds ago) covered by anything.
So the reason of our problem is slow response from proximity sensor, it's super fast to detect the sensor is covered, but a lot slower to detect it's uncovered. (You can test it during the phone call - you'll see what I mean).
The solution is just wait a second after you pull out your phone from pocket or after you holding it the way it covers or is near the proximity sensor. I don't think guys triple knocking or keeping your finger on the screen is really helpful. ?
Maybe it can be fixed somehow by our devs, make the proximity sensor reacts quicker.
xegi said:
Knock On feature to turn screen on doesn't work if proximity sensor is covered (try to cover it and tap the screen - it will stay off). Also phone needs a short while to detect the sensor is not covered anymore. So if you pull out your phone out of a pocket and immediately try to turn screen on it simply won't work at first try. Second usually does the job. I've never really had a problem with unlocking the phone while it's on the table or something, when the sensor isn't (or wasn't two seconds ago) covered by anything.
So the reason of our problem is slow response from proximity sensor, it's super fast to detect the sensor is covered, but a lot slower to detect it's uncovered. (You can test it during the phone call - you'll see what I mean).
The solution is just wait a second after you pull out your phone from pocket or after you holding it the way it covers or is near the proximity sensor. I don't think guys triple knocking or keeping your finger on the screen is really helpful. ?
Maybe it can be fixed somehow by our devs, make the proximity sensor reacts quicker.
Click to expand...
Click to collapse
Probably does that so it won't come on by "knocking" in your pocket. Not a big deal for me at all. And the OP's method is working 100% of the time fur me. No need for 3 knocks any more.
I'd like to confirm what don't others have said and say that the most common mistake is tapping too fast.
Correct that the knock on only uses the sensor to avoid turning the screen on in your pocket.
However, if the touch screen constantly listens for these knocks while it is turned off, shouldn't that consume at least a considerable amount of battery?
Sent from my LG-D802 using XDA Premium 4 mobile app
Noam23 said:
What I found out is that the timing of the two knocks is less important, what is more important is to keep the finger on the screen after the second knock. After the second knock just keep it on the screen until you see the LED lights up, and you'll see how more efficient it will become.
Click to expand...
Click to collapse
this is an excellent tip, thanks! I went from knock knock knock knock, to knock knock and hold and its worked every time for me..
Exellent tip thanks!
Works 100% of the time now! :good::victory::laugh:
This tip however, does not apply to turn off the device. Two quick taps (and release) takes care of that always!
Cheers!
noob question
Noam23 said:
What I found out is that the timing of the two knocks is less important, what is more important is to keep the finger on the screen after the second knock. After the second knock just keep it on the screen until you see the LED lights up, and you'll see how more efficient it will become.
Click to expand...
Click to collapse
sorry for this really really dumbass question but when u say "After the second knock just keep it on the screen until you see the LED lights up"
i infer 1 knock (tap and lift finger) and then 2nd one is not actually a knock (tap and lift finger) but just tap and keep ur finger there itself
or
is it 2 knocks and then (after second lift of finger) jst touch the screen again
good i really feel like dumbest dumb on this planet asking this question but please do reply
i dont yet have g2 but planning on buying it so i cant confirm myself what u meant

Super Deep Sleep?

My phone's always-on display will turn off. I can't bring it out of it's 'slumber' anyway other than plugging it in. It instantly pops out of sleep and works fine. I'll lock it and while I can see the always-on display the fingerprint reader will unlock it with no problems. This just started in the past hour for me. I've tried resetting the phone and the issue still pops up, and quickly at that.
Are you using a case or screen protector? Could be something interfering with the ambient light or proximity sensor causing the phone to think it's in your pocket at all times?
Edit:
Actually just tested this. Covered the top sensors and the always on display turned off and fingerprint sensor no longer worked just like you described
Sent from my LG-H850 using XDA-Developers mobile app
duckysempai said:
Are you using a case or screen protector? Could be something interfering with the ambient light or proximity sensor causing the phone to think it's in your pocket at all times?
Edit:
Actually just tested this. Covered the top sensors and the always on display turned off and fingerprint sensor no longer worked just like you described
Sent from my LG-H850 using XDA-Developers mobile app
Click to expand...
Click to collapse
You may be right about that. I'm using a lifeproof case and I had just opened it up to clean off the inside (I had shown someone the phone earlier and dog hair found its way to the inside of the case). Funny thing is I turned it completely off and let it sit for a time, as opposed to the restart I did earlier, and it's working alright now. Maybe I just needed to reset it's calibration by resetting it?
Anyone know how to disable this weird dependence on the light sensor? I just don't understand why it would ever disable itself because it's dark.
somethinlike said:
My phone's always-on display will turn off. I can't bring it out of it's 'slumber' anyway other than plugging it in. It instantly pops out of sleep and works fine. I'll lock it and while I can see the always-on display the fingerprint reader will unlock it with no problems. This just started in the past hour for me. I've tried resetting the phone and the issue still pops up, and quickly at that.
Click to expand...
Click to collapse
I read this is a feature of the phone. The always on will turn off in your pocket or in a darkened room. Nice idea since you do not need to be using the juice then. You can test this in a dimmly lit room by cupping your hands over the display to block the light.
marcmarshall said:
I read this is a feature of the phone. The always on will turn off in your pocket or in a darkened room. Nice idea since you do not need to be using the juice then. You can test this in a dimmly lit room by cupping your hands over the display to block the light.
Click to expand...
Click to collapse
Sure, but it won't turn on even when I press the back button. Pretty obnoxious when I'm sitting in a blacked out room and I have to hold it up to the computer screen to activate it.
Yeah, I'm sorry I didn't read the thread carefully. That sucks. I'm in a dark room now watching video. The display turned off, I heard a notification, when I picked up the phone it came on. I do not like that that the led notifications stop. I'm not sure what happens to sound notifications when the always on goes off. I prefer to set the phone silent until a certain time in the AM and then use a sound profile to get notifications and a low volume.
somethinlike said:
Sure, but it won't turn on even when I press the back button. Pretty obnoxious when I'm sitting in a blacked out room and I have to hold it up to the computer screen to activate it.
Click to expand...
Click to collapse
I would return it for another or send it in on warranty.
marcmarshall said:
I would return it for another or send it in on warranty.
Click to expand...
Click to collapse
I'm thinking it was the Lifeproof case I have on it. It all worked fine for a week then when I tested the case for waterproof it failed (the phone wasn't in it). I sent for another one and it seems to be working alright now. Maybe it had something to do with the inside of my case getting wet? I don't know.
Great! Enjoy your phone g why are we still calling these things phone?). I like the G5. Now that we have torur I am hoping their for some nice tweaks.
I've had this happen too and it made my life proof case useless because I couldn't use my phone with it on it I still have the issue once in a while but not nearly as often anymore
Sent from my LGLS992 using XDA-Developers mobile app

Categories

Resources