Hey guys, today i was messing around with my nook tablet and i tried to restore it and i acidently deleted everything. now when ever i boot its goes straight to CWM recovery. ive tried to flash recovery and stock reboot and nothing worked. Is there anyway to restore it using usb or anything else? thanks.
I ran into similar difficulty with this earlier today. What worked for me eventually was using
the CMW Windows installer on my SD card, which nerfed it down from 32GB to 2GB,
formatted that 2GB partition,
put the "acclaim_update.zip" folder in the root,
inserted the sd card,
plugged the tablet into the charger,
power+n cycled once, then regular boot and it went it.
Your results may vary, though. It took a few tries before I finally got it to boot from SD
How exactly do i do that?
Fix for the Cyanoboot CWM bootlooping...
It could help someone, haven't seen this simple fix around so i decided to post it up here.
1. boot into CWM from sdcard, see here to download the sdcard version , instructions to burn the image to your sdcard are there too.
2. once you have finished burning the image into your sdcard you will see the size of your sdcard will be reduced to less than 50 MB, CLICK on your sdcard and you will see some files in there.
3. Download 8gb-16gb_cwm_internal.zip from my thread and copy-paste it to your sdcard so you can flash CWM internal using CWM sdcard version. HOPE YOU DONT GET CONFUSED.
4. Safely eject your sdcard from PC, power off your nook(long press power button), put the sdcard back into your nook, power on your nook.
5. It will boot into CWM sdcard then flash 8gb-16gb_cwm_internal.zip, reflash the ROM of your like (It should be on Internal sdcard, you can also swap to another sdcard containing the ROM while in CWM sdcard or resize CWM sdcard [50mb] with a partition tool software so you can copy a ROM to it).
6. Remove the sdcard from your Nook and select reboot system now from CWM
Done!
Your Nook tablet should now boot normally!!!
NOTE: the 8gb-16gb_cwm_internal.zip made by @succulent has few options missing so consider to install another internal CWM later. This process will just make you fix the bootlooping process and boot your device normally.
~ V
Flash "acclaim_update.zip"
I recently made a thread on how to flash "acclaim_update.zip" in CWM so head on over to it and see if it works for you and remember do a factory reset from CWM. http://forum.xda-developers.com/showthread.php?t=1762024
Related
Hi,
I just picked up my tablet yesterday, but am unable to install the clockwork mod. I followed the instructions in the guide thread:
http://forum.xda-developers.com/showthread.php?t=865245
It is not loading the clockwork mod. I see the "Detect a recovery key pressed", see a black screen with nothing but the word "android" and then I see a large warning triangle before the system boots into the normal interface.
Could this be due to a recent change in their firmware that is shipped? Could I be missing something here? I create the folder in my removable compact sd card and copy the recovery.zip file there.
Please help, I do not want this tablet if it is to stay in the stock state....
Found out why!
I didn't extract the zip file. I simply renamed it. Stupid stupid stupid....
I hope that if anyone else here had that issue they will see this.
julesy said:
I didn't extract the zip file. I simply renamed it. Stupid stupid stupid....
I hope that if anyone else here had that issue they will see this.
Click to expand...
Click to collapse
I started making .rar files now, just to try to make that more clear. Don't worry, I've done the same thing and I created the zip file! :O
My files are usually like this because I need to put the recovery folder in there, for non-clockworkmod users.
I'm having the same problem, However I did extract the files correctly like stated and didn't rename anything. However, I still getting the screens like you described in your post. Any ideas?
What is it doing
Sent from my vsG with VEGAn-TAB-v1.0.0b4 using Tapatalk
update.zip should be in the root of the card...then in a folder called recovery should b a file called command
Sent from my VEGAn-TAB-v1.0.0b4 using Tapatalk
I am having the same issues. Running the TNT 3316 build. When trying to install the Google apps pr clockwork mod it says recovery key pressed then loading recovery kernel. then it loads a screen with a status bar and quickly reboots without changing any files. I rooted with z4 root and a sideloaded root explorer works and mounts system. any ideas?
I had the same problem and spent hours on it. Originally I used a 16gb microscope card and didn't work...then I switched to an 8gb and it worked...probably has to do with the micro SD card size. Also, press vol. Up fret followed by power and release power when viewsonic start screen comes on. Then release volume button when upper left sentence comes on
When I had the same problem it was due to recovery/command in the cwmod_v08.zip looking for update.zip at /sdcard2/ and I had copied the files over USB so they ended up at /sdcard/.
Another thing to try (I have had to do this occasionally when CW won't install), in the settings menu under the security tab, do a factory reset. It doesn't lose my settings but clears up whatever is keeping CW from installing. Once I do a factory reset then the install works flawlessly. Hope this helps someone.
Thanks
Sarvatt said:
When I had the same problem it was due to recovery/command in the cwmod_v08.zip looking for update.zip at /sdcard2/ and I had copied the files over USB so they ended up at /sdcard/.
Click to expand...
Click to collapse
I ran into this problem today and was boggled for a half hour, your post helped me figure out my problem, thanks!
rensky said:
I had the same problem and spent hours on it. Originally I used a 16gb microscope card and didn't work...then I switched to an 8gb and it worked...probably has to do with the micro SD card size. Also, press vol. Up fret followed by power and release power when viewsonic start screen comes on. Then release volume button when upper left sentence comes on
Click to expand...
Click to collapse
I'm having the same exact issue. 16GB SD card getting same results; can't get into clockwork mod, get recovery kernel instead. I don't know why it should have anything to do with size of SD card, but I'll try it since you had success. Thanks.
magicpwr said:
I'm having the same exact issue. 16GB SD card getting same results; can't get into clockwork mod, get recovery kernel instead. I don't know why it should have anything to do with size of SD card, but I'll try it since you had success. Thanks.
Click to expand...
Click to collapse
I'm using a 16gb sdcard and it works fine. Make sure when you unzip the clockwork 0.8 file that you place it on the root of the sdcard and make sure the command file in the recovery folder is pointing to the sdcard you want to use.....if the line in the command file is "SDCARD2" then either change it to "SDCARD" and use the internal sdcard card or use the external sdcard.
SDCARD
/sdcard/update.zip
/sdcard/recovery/command
SDCARD2
/sdcard2/update.zip
/sdcard2/recovery/command
Make sure the command file is there. It deletes the first time you try to install
Thanks. That was totally the problem. Need to factory reset, because the settings that the gtablet is shipped with are not the default.
I am having a similar problem with not being able to install CWM on my gTablet.
I upgraded from bootloader 1.1 to 1.2 and I am currently running this (from About Tablet):
Model Number UPC300-2.2
Android OS version 2.2
Tap UI version 1.2-4349
Kernel version [email protected] #1
Build Number FRF91
I would like to flash the Flashback 10.1 ROM but for some reason I can't get ClockworkMod back.
After I do a nvflash I attempt to go into recovery. There I will see the stock recovery with only limited options.
I copied the CWM 0.8 recovery folder and upgrade.zip to the root of the sd card.
Then when I reboot into recovery I get " Recovery key detected" and "Booting recovery kernel image" It will just sit there like that.
So I tried to just flash the rom file as update.zip and I get back into the stock Android system recovery <e3>
Options:
System Reboot
Apply Internal update.zip
Apply external update.zip
Wipe Data/Factory reset
Wipe cahce partition
Calibrate Touch panel
below that I am now getting this:
E:Can't mount /dev/block/mmcblk2
(No such file or directory)
E:Can't mount SDCARD2:recovery/command
I am getting very confused :-(
Frogbone said:
I am having a similar problem with not being able to install CWM on my gTablet.
I upgraded from bootloader 1.1 to 1.2 and I am currently running this (from About Tablet):
Model Number UPC300-2.2
Android OS version 2.2
Tap UI version 1.2-4349
Kernel version [email protected] #1
Build Number FRF91
I would like to flash the Flashback 10.1 ROM but for some reason I can't get ClockworkMod back.
After I do a nvflash I attempt to go into recovery. There I will see the stock recovery with only limited options.
I copied the CWM 0.8 recovery folder and upgrade.zip to the root of the sd card.
Then when I reboot into recovery I get " Recovery key detected" and "Booting recovery kernel image" It will just sit there like that.
So I tried to just flash the rom file as update.zip and I get back into the stock Android system recovery <e3>
Options:
System Reboot
Apply Internal update.zip
Apply external update.zip
Wipe Data/Factory reset
Wipe cahce partition
Calibrate Touch panel
below that I am now getting this:
E:Can't mount /dev/block/mmcblk2
(No such file or directory)
E:Can't mount SDCARD2:recovery/command
I am getting very confused :-(
Click to expand...
Click to collapse
i'm having a similar issue with trying to install cwm, bc1.3.1 update, flashback, etc, without nvflashing back to stock viewsonic rom....
just get the "booting recovery kernal image" line ad infinitum
i even just used nvflash to install cwm (which appeared to go properly) and when trying to get into recovery it still just does the same thing, sits at that second line...
hikouka71 said:
i'm having a similar issue with trying to install cwm, bc1.3.1 update, flashback, etc, without nvflashing back to stock viewsonic rom....
just get the "booting recovery kernal image" line ad infinitum
i even just used nvflash to install cwm (which appeared to go properly) and when trying to get into recovery it still just does the same thing, sits at that second line...
Click to expand...
Click to collapse
I think I might have figured it out. I flashed the nvflash with this from here: http://viewsonic-gtablet-for-dummies.webs.com/nvflash.htm
nvflash with clockworkmod 1.2 branch.
Then I booted into that stock ROM
went to USB and deleted everything off the sdcard.
copied calkulin's format all and the flashback 10 ROM to sdcard
turned off device
booted into recovery, now CWM
flash calkulin's format all
flash ROM
Reboot
voila
hope this helps
Frogbone said:
went to USB and deleted everything off the sdcard.
copied calkulin's format all and the flashback 10 ROM to sdcard
turned off device
booted into recovery, now CWM
flash calkulin's format all
flash ROM
Reboot
voila
hope this helps
Click to expand...
Click to collapse
went to usb? do you mean you plugged in and activated usb transfer? and did you really delete everything from the /sdcard/ directory???
what caulkins did you use? looking for link now
hikouka71 said:
went to usb? do you mean you plugged in and activated usb transfer? and did you really delete everything from the /sdcard/ directory???
what caulkins did you use? looking for link now
Click to expand...
Click to collapse
yes, I copied everything to my PC first of course but then deleted everything except for the recovery folder and my download folder where I had some ROM files etc.
Here is the link to the Calkulin's file : http://www.mediafire.com/?sxgwdof1s6oa7hc
Frogbone said:
yes, I copied everything to my PC first of course but then deleted everything except for the recovery folder and my download folder where I had some ROM files etc.
Here is the link to the Calkulin's file : http://www.mediafire.com/?sxgwdof1s6oa7hc
Click to expand...
Click to collapse
i had found a calkulins but for some reason it wouldn't flash, but followed your directions and am into flashback honeycomb now, thanks!
now if only i can get it to connect to my canon camera so i can use dslrcontroller!
Hi I was on the last step of installing Cyanogen Nighly build 116 on my SGS2 and got to step 7 of the guide on their wiki
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II:_Full_Update_Guide
but I couldnt find my external SD card on Clockwork mod recovery. I tried to reboot back to my normal samsung OS so I could use USB to put the 2 update zip files on my internal storage but the phone is now boot looping. I boot up to the samsung logo then the phone restarts.
What do I do please?
Hi again,
I have tried booting in download mode which does nothing but show me the android man withthe word Downloading... underneath (VolDown, Home, Power). I have tried booting back to Clockwork Mod recovery (VolUp, Home, Power) and I have tried messing around with adb to see if it sees any devices- which it does, it sees
304D19A75555E24E
but it doesnt accept adb push update.zip I guess because the phone is busy rebooting :S
My guess would be you've installed a different version of CWM recovery. Choose "Install zip from internal Sdcard" instead.
oinkylicious said:
My guess would be you've installed a different version of CWM recovery. Choose "Install zip from internal Sdcard" instead.
Click to expand...
Click to collapse
Hi
It says Clockwork Mod Recovery v4.0.1.4
It doesnt have an option other than install zip from sdcard
and it doesnt see the external sd card either.
I have
- reboot system now
- apply update from sdcard
- wipedata/factory reset
- wipe cache partitions
- install zip from sdcard
- backup and restore
- mounts and storage
- advanced
- power off
I chose install zip from sd card
then chose zip from sdcard
and I get the internal listing of files on the internal phone storage but no access to the external sd card. There is a folder there called, external_sd but when I select it, it just says No files found. It shows this when the sd card is inserted and uninserted though.
Do you know any way I can put the update files on the internal phone memory from my PC? I have adb installed and the android sdk. but adb wont push files to the phone. I used to know a way to boot the phone with fastboot but dont remember how to do that any more
You need to tell it where to save the file if you're going to do adb push, i.e. adb push update.zip /sdcard/cm7.zip, but you might need to mount somewhere to store it in mounts and storage first for it to work.
oinkylicious said:
You need to tell it where to save the file if you're going to do adb push, i.e. adb push update.zip /sdcard/cm7.zip, but you might need to mount somewhere to store it in mounts and storage first for it to work.
Click to expand...
Click to collapse
ah but I cant get it to boot so I cant get it to mount. The closest I can get is getting adb to recognise it as a device while it is bootlooping (it only gets up to the Samsung logo then reboots)
I did try "adb push update.zip /sdcard/cm7.zip"
failed to copy 'update.zip' to 'sdcard/cm7.zip' : Read-only file system
The phone is still rebooting over and over. Out of curiosity, would CWM not give the option to install zip from the external sd card if the phone didnt have root?
I bought this phone from a friend and he said the phone did have root but I actually am not sure if it does. Would that also cause me not to be able to use adb to push the file because the internal sd card was read only?
Either way - how do I get the phone back to a usable state please?
I mean from within CWM recovery, which you said you can access (ADB should work there after 30 seconds or so).
oinkylicious said:
I mean from within CWM recovery, which you said you can access (ADB should work there after 30 seconds or so).
Click to expand...
Click to collapse
booted to CWM - waiting for pc to notice phone exists so I can use adb...
... nothing is happening. (tried using mount usb storage too)
EDIT1: I rebooted CWM and when it came back - tada - windows noticed it. Ran the ADB command and the copy has worked over 36s.
Watch this space...
EDIT2: Got the phone to finally let me upload update.zip (the 116 nightly build from cyanogen) and gapps (for cyanogen7) using the mount option under Clockwork Mod recovery
installed update.zip
installed gapps.zip
rebooted and...
stuck at
Samsung
GALAXY S II
GT-I9100
/!\
``
nothing is happening, the phone doesnt boot... but CWM has changed colour to a pretty blue and I am now on v5.0.2.7. What am I meant to do next? I ran out of steps on http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II:_Full_Update_Guide
Flash the update twice in succession, if the first one was quick.
oinkylicious said:
Flash the update twice in succession, if the first one was quick.
Click to expand...
Click to collapse
yes your right, it was quick. I flashed it again - much slower this time and it seems to be working - I finally got off the stuck screen. Currently watching the new cyanogen mod 7 boot screen.
Big thanksometer - if your anywhere near me i'd buy you a coffee.
First the pertinent info.
Nook Tablet 16gb
Cyanoboot installed
CWM 6.0.1.9
No errors in log when I start CWM.
I had megadh00t's Cherrypicks rom installed, the 11/07 edition
I decided to update.
It worked fine. Full wipe. EXCEPT, wifi wouldn't turn on.
I went back into CWM. Wiped everything again. But I made a mistake
I wiped the ROM partition. I know better, but I did. Tired I guess.
Now goes right into recovery every time.
Any way to fix this or do I have to total wipe?
And if I do, I repartitioned the nook as well, so would I have to first repartition it back to default, then total wipe, root, cwm, then install the ROM?
Plus, I am 5 touched, so would it even work to go to the regular nook software? Am I looking at a perma brick because of the 5touch?
Thanks for the info and any help you can give me!
If it will boot off an SD card, make a cm10 SD card. Once in cm10 flash back to stock touch firmware
Sent from my NT running CM10
You can find the easiest way to make a CM10 SD card here.
So as soon as it goes to Cyanoboot, it begins to load Recovery from emmc. I have no menu choices. Any ideas? I made a CWM recovery card first, but it never even gets there.
Sounds like you booted straight into emmc.
To boot from SDcard (assuming that it has bootable boot partition and requisite set of files MLO/u-boot.bin/flashing_boot.img/boot.img/recovery.img -- e.g., from here) first power off the NT, then insert a powered-usb cable. When Cyanoboot comes up, hold the N button for boot menu, then select SDC Recovery. If you have a ROM zip on the card you can flash it with option "install zip from sdcard".
Found out what the problem with booting was.... no boot and lba flags on the card.
Got it to boot, tried to install ROM, but cyanoboot still goes direct to emmc recovery.
Looks like I am going to have to go the long route.
I know that I have to flash back to 2 touch to even begin the process, but now I have to figure out how to change the recovery ROM from
this post into an SD bootable one and see if it works. If it does (and I can figure it out) I will then start over from the beginning
Too bad because it looks like my partition table is absolutely fine. No errors at all. Bummer.
digixmax said:
Sounds like you booted straight into emmc.
To boot from SDcard (assuming that it has bootable boot partition and requisite set of files MLO/u-boot.bin/flashing_boot.img/boot.img/recovery.img -- e.g., from here) first power off the NT, then insert a powered-usb cable. When Cyanoboot comes up, hold the N button for boot menu, then select SDC Recovery. If you have a ROM zip on the card you can flash it with option "install zip from sdcard".
Click to expand...
Click to collapse
New post because completely separate from previous.
In a bizarre turn of events, I CAN boot from the internal emmc, but only with a SD boot card that I created trying to reflash my 5 touch firmware back to the 2 touch firmware.
Here is my question.
I would obviously not like to use this workaround of having the SDcard in, booting from cyanoboot into the INT emmc.
Is there any way to replace the internal cyanoboot or reset it somehow so that it doesn't automatically boot into recovery every time? Then I wouldn't need the SD card, and to go through the long and drawn out process of getting my nook back into shape
Thanks!
I just tried to upgrade from Alliance build 26 to build 30. I also loaded TWRP and used that to load update to build 30 since trying to load build 30 with CWM kept resulting in an abort with error 7. Now I am stuck at either simply booting into TWRP or to Droid logo to use Odin. I have have no useable file to recover to since all my backup files are CWM and I find out now they are useless in TWRP. Can I bypass TWRP and get back into CWM or am I screwed and need to start all over with Adam's thread to use Odin and stock files?Will I lose my saved CWM files entirely now on the phone itself? I need help please!
NB2A said:
I just tried to upgrade from Alliance build 26 to build 30. I also loaded TWRP and used that to load update to build 30 since trying to load build 30 with CWM kept resulting in an abort with error 7. Now I am stuck at either simply booting into TWRP or to Droid logo to use Odin. I have have no useable file to recover to since all my backup files are CWM and I find out now they are useless in TWRP. Can I bypass TWRP and get back into CWM or am I screwed and need to start all over with Adam's thread to use Odin and stock files?Will I lose my saved CWM files entirely now on the phone itself? I need help please!
Click to expand...
Click to collapse
Here's a few options off the top of my head to get you up and running again.....
1. You can use Odin to flash CWM recovery back to your phone, then (if you saved the CWM backup to your external sd card prior to flashing TWRP)... you could just restore that backup from the external sd card. If you saved your CWM backups to internal memory, they are probably deleted because I'm assuming you wiped when trying to install Alliance 30.
2. You can mount TWRP in USB mode, then transfer a recovery flashable CWM zip over to your external sd from the computer, and then flash CWM back to your phone and restore your CWM backup.
3. If you have an external sd card adapter for the computer... then you can remove the external sd card from the phone and mount it in the computer to transfer over a CWM recovery flashable zip and your backup files (assuming that you saved a backup in the computer). Put the sd card back into the phone.... then use TWRP to reinstall CWM.... then use CWM you restore one of your backups.
4. If you keep encountering booting problems and none of those ideas work... it would probably be best to just use ODIN to restore back to stock 4.1.2... then start from scratch by re-rooting the with Casual.
Good luck.
mattnmag said:
Here's a few options off the top of my head to get you up and running again.....
1. You can use Odin to flash CWM recovery back to your phone, then (if you saved the CWM backup to your external sd card prior to flashing TWRP)... you could just restore that backup from the external sd card. If you saved your CWM backups to internal memory, they are probably deleted because I'm assuming you wiped when trying to install Alliance 30.
2. You can mount TWRP in USB mode, then transfer a recovery flashable CWM zip over to your external sd from the computer, and then flash CWM back to your phone and restore your CWM backup.
3. If you have an external sd card adapter for the computer... then you can remove the external sd card from the phone and mount it in the computer to transfer over a CWM recovery flashable zip and your backup files (assuming that you saved a backup in the computer). Put the sd card back into the phone.... then use TWRP to reinstall CWM.... then use CWM you restore one of your backups.
4. If you keep encountering booting problems and none of those ideas work... it would probably be best to just use ODIN to restore back to stock 4.1.2... then start from scratch by re-rooting the with Casual.
Good luck.
Click to expand...
Click to collapse
Thank you for responding with such detail. It finally started to boot into Alliance logo but never completed. Now it says with yellow triangle phone needs to be returned to Verizon. It does not even work in Odin. I do have an external reader for the card but I guess I am screwed now anyway.I wonder if Verizon will even help me at all back to stock.
So, I screwed up my kid's tablet trying to allow for more than just in-device storage because Samsung gave it a Micro SD port that it can barely use.
Anyway, I used Odin to install <recovery.tar.md5> from Zip folder: T210.CWM.6.0.4.5.recovery.tar
I had tried installing T210.TWRP.2.8.0.0.tar.md5 but could not get a successful restart.
This is the instructions I followed: (Ooops! Can't post outside links, yet.)
Installed Samsung USB Drivers and enabled USB debugging. (Had issues getting all the drivers to install. But had no problems with Odin).
Copied android-armeabi-universal-root-signed.zip to the SD card on the tablet.
Sent CWM recovery file via Odin.
Rebooted into CWM recovery
Installed from Zip on external SD
Rebooted again as "Android updated"
Initial Root check said not rooted, but downloaded SuperSU by _______? (can't tell at the moment) And then it came as rooted.
Downloaded App2SD and partitioned the external SD card. Had to use Format option instead of Create for it to work.
In APP2SD, selected something about Linking apps. A prompt came up stating to reboot into recovery and do 2 things which I quickly forgot.
Rebooted into CWM and have been stuck ever since.
Attempts to turn off the Tablet end up in a restart into CWM. I did discover that if you press and hold the Power button and the Home button, it will force a shut down, which gave the screen a rest.
I've used most wipe options in CWM, accept the dalvik cache.
When I choose "restore from /sdcard," the image "2017-08-22.16.41.29" results in "Checking MD5sums... MD5 mismatch!"
I was able to remove the MicroSD and add the android-armeabi-universal-root-signed.zip folder back to it. However, after installing this zip successfully in CWM recovery, it just reboots me right back to CWM.
In this adventure, I have used ADB to re-flash CWM but nothing changed. I'm brand new to all of this as you can tell.
I need to get this tab back in working order. What do I do?
CWM recovery gives MD5 mismatch on restore
OK, got a TWRP to work (T210.TWRP.2.8.7.0.tar.md5). Now, I at least have a factory reset, working tablet.
But there is still a backup file from CWM, right? The "2017-08-22.16.41.29"that results in "Checking MD5sums... MD5 mismatch!"
Any chance I could fix this error and get back some or all of my missing stuff?
Wrong forum im afraid...
Ever considered flashing stock firmware with Odin?
Read up on it Itll solve most of your issues
Which is the correct forum, then?
What I really need to know is how to link apps to my SD card. Or some other procedure that allows me to use SD as internal storage.