Related
Ok so I'm running the late july/early august update of newts one xxx RLS rom my Phone is currently S-off and I s-Offed with the 2nd leak of ICS as of late I've been having this problem with my rezound that whenever I shut it off the phoner won't turn back on UNLESS I plug it in into my car charger this is what happens when I try to turn it one
White HTC screen the screen will flash black once and then back to white htc screen, followed by a blank screen then comes in the mikroms with the roadrunner on top and it freezes there then black screen again and phone repeats the whole process again but if I connect the phone to the car charger process is kind of the same except the phone turns on is this problem fixable?
any help will be appreciated
croonux said:
Ok so I'm running the late july/early august update of newts one xxx RLS rom my Phone is currently S-off and I s-Offed with the 2nd leak of ICS as of late I've been having this problem with my rezound that whenever I shut it off the phoner won't turn back on UNLESS I plug it in into my car charger this is what happens when I try to turn it one
White HTC screen the screen will flash black once and then back to white htc screen, followed by a blank screen then comes in the mikroms with the roadrunner on top and it freezes there then black screen again and phone repeats the whole process again but if I connect the phone to the car charger process is kind of the same except the phone turns on is this problem fixable?
any help will be appreciated
Click to expand...
Click to collapse
Sounds like your having boot problems. Can you boot into bootloader just fine without being connected to a charger? If so try flashing the proper boot image for the Rom your on, using fastboot commands.
sent from my s-off reZound rockin' viperRez Rom on global ICS firmware
---------- Post added at 03:19 PM ---------- Previous post was at 03:18 PM ----------
The initial boot.IMG flash may have not been a complete success. Check the md5sum of your Rom.
sent from my s-off reZound rockin' viperRez Rom on global ICS firmware
famouscollin said:
Sounds like your having boot problems. Can you boot into bootloader just fine without being connected to a charger? If so try flashing the proper boot image for the Rom your on, using fastboot commands.
sent from my s-off reZound rockin' viperRez Rom on global ICS firmware
---------- Post added at 03:19 PM ---------- Previous post was at 03:18 PM ----------
The initial boot.IMG flash may have not been a complete success. Check the md5sum of your Rom.
sent from my s-off reZound rockin' viperRez Rom on global ICS firmware
Click to expand...
Click to collapse
yes sir , I am able to boot into bootloader and the other menu where i can install zip from forgot what its called, and how do I check the md5sum? and how do i install boot.IMG?
I haven't been keeping up with all the rezound modding scene like I used to with my first droid things got more complicated :\
Help
Download the latest RUU 4.03.605.2 (Link below), rename it to PH98IMG, and place on the root of your external sd card. Them boot into HBOOT, press Vol Up to confirm update and let it run
P.S. It won't take off S-Off but it will relock your bootloader
Hope this helps!
androidrevolutions.com/neo/files/GlobalRuuPH98IMG.zip
i would agree i would prolly update first just to get it outa of the way. hers an md5 checker DL click file<download: https://docs.google.com/file/d/0B0ZJtM40GdJ0Ymt4ZWRpU3hqVWs/edit go into the thread where you downloaded your rom, you should be able to find the proper md5 sum for your rom there. copy that md5 open and run md5.zip click paste. then browse below to your download for tha rom if the codes dont match retry download. if the do you good. lemme know if your md5 is good and well go from there.
---------- Post added at 04:57 PM ---------- Previous post was at 04:54 PM ----------
the latest global update ruu: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
darkghost568 said:
Download the latest RUU 4.03.605.2 (Link below), rename it to PH98IMG, and place on the root of your external sd card. Them boot into HBOOT, press Vol Up to confirm update and let it run
P.S. It won't take off S-Off but it will relock your bootloader
Hope this helps!
androidrevolutions.com/neo/files/GlobalRuuPH98IMG.zip
Click to expand...
Click to collapse
famouscollin said:
i would agree i would prolly update first just to get it outa of the way. hers an md5 checker DL click file<download: https://docs.google.com/file/d/0B0ZJtM40GdJ0Ymt4ZWRpU3hqVWs/edit go into the thread where you downloaded your rom, you should be able to find the proper md5 sum for your rom there. copy that md5 open and run md5.zip click paste. then browse below to your download for tha rom if the codes dont match retry download. if the do you good. lemme know if your md5 is good and well go from there.
---------- Post added at 04:57 PM ---------- Previous post was at 04:54 PM ----------
the latest global update ruu: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
Click to expand...
Click to collapse
thanks for the help guys I'll let you guys know how it worked it tomorrow as I'm pretty busy and I'm about to leave as well thanks again and quick question as well if I'm s-offed would it even matter if my bootloader got locked?
croonux said:
thanks for the help guys I'll let you guys know how it worked it tomorrow as I'm pretty busy and I'm about to leave as well thanks again and quick question as well if I'm s-offed would it even matter if my bootloader got locked?
Click to expand...
Click to collapse
It shouldn't matter but I've heard reports of some people not being able to use fastboot commands and had to unlock. But that individual was using stock hboot aposed to joupunut hboot.. if you do have problems I guess you could just unlock..
sent from my s-off reZound rockin' viperRez Rom on global ICS firmware
yeah stock locked/relocked hboots even if s-off won't let you fastboot things...
here http://forum.xda-developers.com/showthread.php?t=1853871
put one of those on you're sd card after you do the latest RUU so you can have fastboot capabilities.
CHECK MD5 very important when doing hboot or radio things
---------- Post added at 12:43 AM ---------- Previous post was at 12:42 AM ----------
croonux said:
I'm s-offed would it even matter if my bootloader got locked?
Click to expand...
Click to collapse
Nope doesn't matter that's what the moddified hboots are for. the link is in my above post
Ok so I just updated to the latest ruu today i didn't have time until today but things got worse now I updated first before checking md5, could that have been the error? and now it just keeps rebooting on the HTC screen and it won't go to the mikroms screen
I went to my roms page and I can't seem to find the md5 http://themikmik.com/showthread.php...ense-4-GB-4-0-3)-4-2-2012&p=197893#post197893 help??? (I'm extremely tired so my finding/logical sense are not working properly right now)
and now it seems as if my recovery has been deleted as I get a Phone screen facing up as if it was laying down on a table with a green refreshing sign/reloading sign fllowed by a phone screen facing me with a red triangle like the one where you turn on the hazard lights on your car
..
You could find Amon Ra 3.15 recovery in a zip that can be renamed PH98IMG.zip
and reinstall recovery. Your immediate problem may be solved, but if you have time, you can do more.
Amon Ra lets you look at either internal drive: your sdcard or the phone's storage:
toggle the sdcard, attach to computer, and remove the PH98IMG of just-installed Amon Ra recovery.
Now find the Android Police 4.03 version (large download if correct) , make sure the md5's match for it, and
copy it to extrenal sdcard renamed as PH98IMG.zip. It will run 1 1/2 times then boot
up to operating system. Many people say to do another reinstall and/or one or more Factory Resets at this point:
one from Seup- Storage - Factory reset with phone "on". Another factory resey is availble
by booting to recovery and choosing Reset. It's a good idea to do one or both style resets before
you reinstall a recovery. Every time you run an RUU or a zip that replaces the ROM, you have
to reinstall that Recovery. To avoid no-charging situations, I'd advise keeping Amon Ra 3.15.
Now you're at the point you can root and play with this powerful handset.
michaelbsheldon said:
You could find Amon Ra 3.15 recovery in a zip that can be renamed PH98IMG.zip
and reinstall recovery. Your immediate problem may be solved, but if you have time, you can do more.
Amon Ra lets you look at either internal drive: your sdcard or the phone's storage:
toggle the sdcard, attach to computer, and remove the PH98IMG of just-installed Amon Ra recovery.
Now find the Android Police 4.03 version (large download if correct) , make sure the md5's match for it, and
copy it to extrenal sdcard renamed as PH98IMG.zip. It will run 1 1/2 times then boot
up to operating system. Many people say to do another reinstall and/or one or more Factory Resets at this point:
one from Seup- Storage - Factory reset with phone "on". Another factory resey is availble
by booting to recovery and choosing Reset. It's a good idea to do one or both style resets before
you reinstall a recovery. Every time you run an RUU or a zip that replaces the ROM, you have
to reinstall that Recovery. To avoid no-charging situations, I'd advise keeping Amon Ra 3.15.
Now you're at the point you can root and play with this powerful handset.
Click to expand...
Click to collapse
ok so download amon ra and then check md5 but the only problem im encountoring so far is I don't know how to check md5 I've gone to my roms page (link on first page last post) and I can't seem to find where I can check the md5 and I do have time today and I don't really feel like reinstalling/reseting if I don't have too
croonux said:
ok so download amon ra and then check md5 but the only problem im encountoring so far is I don't know how to check md5 I've gone to my roms page (link on first page last post) and I can't seem to find where I can check the md5 and I do have time today and I don't really feel like reinstalling/reseting if I don't have too
Click to expand...
Click to collapse
Download MD5 checker from the play store. Load the PH98IMG as file 1, then paste the md5 from the amon ra thread into the second text area. Then press the button.
GrayTheWolf said:
Download MD5 checker from the play store. Load the PH98IMG as file 1, then paste the md5 from the amon ra thread into the second text area. Then press the button.
Click to expand...
Click to collapse
I can't boot my phone anymore as of today so i won't be able download the app, and what text area do I put the md5 from amon ra and is there anyother way to check md5 or should I jsut reinstall rom/ factory reset, but for that I gotta go to staples right now and buy a micro sd adapter as I can't modify my sd at all anymore
bump and another cry for help so I installed the latest ruu, bootloader got locked and recovery got erased, so i installed amon ra 3.15 as per the instructions up there, where do I go from here? what else do I install I'm having the same problems from first post... how do i check md5 if I can't boot into the phone? any more help will be appreciated
actually just by looking at my bootloader could it be possible that the global ruu didn't get install? this is the info I have when I hold power and vol -
****LOCKED****
VIGOR PVT SHIP S-OFF RL
HBOOT-2.27.0000
RADIO- 2.22.10.0801R/2.22.10.0803R
OpenDSP-v14.6.0.7708.00.0507
eMMc-BOOT
AUG 6 2012, 19:24:37
.
2.27 is the newst Global firmware.
When you boot, are you still seeing something from MikRoms?
If yes, your RUU installation didn't work.
I'd use Amon Ra to wipe:
every choice several times and reinstall the whole Android Police 4.03 PH98IMG.zip.
If you don't get a nice clean oem-style stock bootup after that, then the RUU is suspect, may need
to get from another source.
michaelbsheldon said:
2.27 is the newst Global firmware.
When you boot, are you still seeing something from MikRoms?
If yes, your RUU installation didn't work.
I'd use Amon Ra to wipe:
every choice several times and reinstall the whole Android Police 4.03 PH98IMG.zip.
If you don't get a nice clean oem-style stock bootup after that, then the RUU is suspect, may need
to get from another source.
Click to expand...
Click to collapse
yup I get the mikroms thing again guess it didn't work when I wipe my data do I wipe ALL data/factory reset and does this include my SD card when it gets wiped or no?
.
yeppers:
in AmonRa, take Wipe, then do each one including the internal and external Sdcards
and dalvik cache and everything else a coupla times..
The RUU ought to have undone everything else in your phone incl MikMik, so it may
not be a good one.
After all wipes, put it back onto your external card as PH98IMG and flash twice.
If all is well, you'll have a fine virgin install ready to be rooted and messed with.
michaelbsheldon said:
yeppers:
in AmonRa, take Wipe, then do each one including the internal and external Sdcards
and dalvik cache and everything else a coupla times..
The RUU ought to have undone everything else in your phone incl MikMik, so it may
not be a good one.
After all wipes, put it back onto your external card as PH98IMG and flash twice.
If all is well, you'll have a fine virgin install ready to be rooted and messed with.
Click to expand...
Click to collapse
cool thanks for all your help man, and im glad i still got my droid 1 sd
Hi everyone,
Hoping to get a little feedback. I am a bit confused about how to correctly update to the latest firmware (2.13). I looked at the thread located here.
The download I think is the correct one is labeled "2.13.651.1 Firmware (No Kernel, Hboot, or Recovery.)"
Question: Since I am running TWRP recovery, does this get flashed in the same way as described by the thread:
"How to flash (install):
Download your zip of choice, and rename it to PJ75IMG.zip, and save it to the root of your external sd card. Reboot into bootloader mode, and accept the update. Let it run through, and wait for the successful message. "
PS here are my specs:
Phone is unlocked (s-off) and has root (Used RegawMOD) to achieve this.
TWRP Recovery installed.
Made backup of the stock rom using TWRP.
Software information:
Android version:
4.0.3
HTC Sense version:
4.0
Software version:
1.13.651.1 710RD
HTC SDK API level:
4.20
PRI Version:
2.28_003
PRL Version:
25009
More:
Kernel Version: 3.0.8-01360...
Baseband:
1.02.12.0427
Build number:
1.13.651.1_R2 CL60201 release-key
cloves said:
Hi everyone,
Hoping to get a little feedback. I am a bit confused about how to correctly update to the latest firmware (2.13). I looked at the thread located here.
The download I think is the correct one is labeled "2.13.651.1 Firmware (No Kernel, Hboot, or Recovery.)"
Question: Since I am running TWRP recovery, does this get flashed in the same way as described by the thread:
"How to flash (install):
Download your zip of choice, and rename it to PJ75IMG.zip, and save it to the root of your external sd card. Reboot into bootloader mode, and accept the update. Let it run through, and wait for the successful message. "
PS here are my specs:
Phone is unlocked (s-off) and has root (Used RegawMOD) to achieve this.
TWRP Recovery installed.
Made backup of the stock rom using TWRP.
Software information:
Android version:
4.0.3
HTC Sense version:
4.0
Software version:
1.13.651.1 710RD
HTC SDK API level:
4.20
PRI Version:
2.28_003
PRL Version:
25009
More:
Kernel Version: 3.0.8-01360...
Baseband:
1.02.12.0427
Build number:
1.13.651.1_R2 CL60201 release-key
Click to expand...
Click to collapse
Unlocked and S-OFF are not the same. If you are HTCDev unlocked you will have to relock your bootloader and take the OTA. If you are LazyPanda S-OFF you can place the file on your ext sdcard and boot into bootloader and it will ask you if you want to flash the update.
I have only used the full firmware package from Capt_Throwback not sure about the one you posted. you can find it here
bigdaddy619 said:
Unlocked and S-OFF are not the same. If you are HTCDev unlocked you will have to relock your bootloader and take the OTA. If you are LazyPanda S-OFF you can place the file on your ext sdcard and boot into bootloader and it will ask you if you want to flash the update.
I have only used the full firmware package from Capt_Throwback not sure about the one you posted. you can find it here
Click to expand...
Click to collapse
Ok just to reiterate the phone is S-OFF & rooted. RegawMOD used the HTC Dev method and flashed TWRP as its recovery program.
I want to keep the phone using the Sprint stock rom for now but want to update the firmware. I can't do OTA because TWRP has replaced the stock recovery from my understanding.
cloves said:
Ok just to reiterate the phone is S-OFF & rooted. RegawMOD used the HTC Dev method and flashed TWRP as its recovery program.
I want to keep the phone using the Sprint stock rom for now but want to update the firmware. I can't do OTA because TWRP has replaced the stock recovery from my understanding.
Click to expand...
Click to collapse
Did you use Lazy Panda to achieve S-OFF?
I am not S-OFF
Bigdaddy, Thanks for the reply again.
I just read on the original forum for RegawMOD that I am not "S-off" because I have not used dirtyracun or lazypanda. For some reason I thought that tool not only gave me root but also "S-off" since it showed tampered with when in the recovery screen.
Thought I had a good handle on this whole rom issue by now considering this is my 4th HTC phone but I guess I am not 100% there.
What should I do at this point? I am mass confused.
Could you share some light on what is the correct way to root and s-off this phone? what a F'in pain in the tail.
cloves said:
Bigdaddy, Thanks for the reply again.
I just read on the original forum for RegawMOD that I am not "S-off" because I have not used dirtyracun or lazypanda. For some reason I thought that tool not only gave me root but also "S-off" since it showed tampered with when in the recovery screen.
Thought I had a good handle on this whole rom issue by now considering this is my 4th HTC phone but I guess I am not 100% there.
What should I do at this point? I am mass confused.
Could you share some light on what is the correct way to root and s-off this phone? what a F'in pain in the tail.
Click to expand...
Click to collapse
Check your PM
im trying to convert my amaze back to stock with a locked boot loader, im currently running Speed Rom 7.8 with the phone locked, rooted, S-off and HBOOT 1.93.0002
i installed the firmware (PH85IMG) awhile back as well while i was rooting it.
i did a full wipe and format, tried installing the following romm but it aborts it in recovery
the rom i used was the first rom under the t-mobile section for the HTC Amaze 4G/ROMs
Release Version ROM Version Radio Version OS Version Sense Version Download File Type
262141 2.14.531.3_R2 1.14.550L.17DC_30.78.550L.15D 4.0.3 3.6 Link ZIP
stoneyr said:
im trying to convert my amaze back to stock with a locked boot loader, im currently running Speed Rom 7.8 with the phone locked, rooted, S-off and HBOOT 1.93.0002
i installed the firmware (PH85IMG) awhile back as well while i was rooting it.
Click to expand...
Click to collapse
somehow im highly confused... are you trying to flash back to stock?
yes trying to convert back to stock and unrooted, i need to send it back in for hardware problems with the battery, i already have the replacement, just need to get this one back in stock and unrooted so i can ship it back, :/ i just cant figure out which Stock rom to install, or if i need to flash a different bootloader.
stoneyr said:
im trying to convert my amaze back to stock with a locked boot loader, im currently running Speed Rom 7.8 with the phone locked, rooted, S-off and HBOOT 1.93.0002
i installed the firmware (PH85IMG) awhile back as well while i was rooting it.
i did a full wipe and format, tried installing the following romm but it aborts it in recovery
the rom i used was the first rom under the t-mobile section for the HTC Amaze 4G/ROMs
Release Version ROM Version Radio Version OS Version Sense Version Download File Type
262141 2.14.531.3_R2 1.14.550L.17DC_30.78.550L.15D 4.0.3 3.6 Link ZIP
Click to expand...
Click to collapse
you can find a complete RUU + stock ROM PH85IMG.zip somewhere in the forum (plus some info about which bootloader you'll need to flash back to stock RUU)
paperWastage said:
you can find a complete RUU + stock ROM PH85IMG.zip somewhere in the forum (plus some info about which bootloader you'll need to flash back to stock RUU)
Click to expand...
Click to collapse
ok, ill keep looking, the bootloader im using is juopuntbear (im not sure what info your looking for here).
when im in bootloader the top few lines in green are...
RUBY PVT SHIP s-off RL
HBOOT- 1.93.0002
OpenADSP-V02.6.0.2226.00.0202
eMMC-boot
the date and time
i found this list of RUU and roms, but idk which one to download and flash.
http://forum.xda-developers.com/showthread.php?t=1617644
stoneyr said:
ok, ill keep looking, the bootloader im using is juopuntbear (im not sure what info your looking for here).
when im in bootloader the top few lines in green are...
RUBY PVT SHIP s-off RL
HBOOT- 1.93.0002
OpenADSP-V02.6.0.2226.00.0202
eMMC-boot
the date and time
i found this list of RUU and roms, but idk which one to download and flash.
http://forum.xda-developers.com/showthread.php?t=1617644
Click to expand...
Click to collapse
Download the ruu (not ota) for your carrier.
Sent from my HTC Ruby using xda app-developers app
Keylogger_0 said:
Download the ruu (not ota) for your carrier.
Sent from my HTC Ruby using xda app-developers app
Click to expand...
Click to collapse
i dont see a RUU for T-mobile, should i download the PH85IMG? or the RUBY ICS 35(first one under T-mobile)?
stoneyr said:
i dont see a RUU for T-mobile, should i download the PH85IMG? or the RUBY ICS 35(first one under T-mobile)?
Click to expand...
Click to collapse
after you relock your bootloader download this file and rename it to PH85IMG (.zip extention) then place it on the root of your sd card.. then reboot the phone into bootloader and install that zip.. that should flash you back to the STOCK t-mobile ICS amaze
getting error
Ninjistix said:
after you re-lock your bootloader download this file and rename it to PH85IMG (.zip extension) then place it on the root of your sd card.. then reboot the phone into bootloader and install that zip.. that should flash you back to the STOCK t-mobile ICS amaze
Click to expand...
Click to collapse
after re-locking the bootloader (with hasoons htc amaze 4g all in one kit), i booted back into bootloader, let the side bar on the top right load, then went to recover(4ext) and went to info, said that speedrom 7.8 was still installed. went to install the PH85IMG.zip from the root of sd card,
get an error in /internal_sdcard/PH85IMG.zip
(Status 7)
installation aborted.
i don't know what else to do, try a different stock rom?
stoneyr said:
after re-locking the bootloader (with hasoons htc amaze 4g all in one kit), i booted back into bootloader, let the side bar on the top right load, then went to recover(4ext) and went to info, said that speedrom 7.8 was still installed. went to install the PH85IMG.zip from the root of sd card,
get an error in /internal_sdcard/PH85IMG.zip
(Status 7)
installation aborted.
i don't know what else to do, try a different stock rom?
Click to expand...
Click to collapse
How many times do we need to emphasize this? You DO NOT flash this in recovery!
And we have said that you have to put this in your EXTERNAL sd card, NOT internal.
Sent from my HTC Ruby using xda app-developers app
sorry i finally got it working, through the external sd card, thank you for your help guys.
I have my bootloader unlocked it says this:
*** RELOCKED ***
*** Security warning ***
RUBY PVT SHIP S-ON RL
HBOOT-1.93.0002
OpenADSP-v02.6.0.2226.00.0202
eMMC-boot
date/time
My question is to go back to complete stock with fastboot and an external SD, if i'm with mobilicity which rom should i use? OTA or RUU?
eurphoricessence said:
I have my bootloader unlocked it says this:
*** RELOCKED ***
*** Security warning ***
RUBY PVT SHIP S-ON RL
HBOOT-1.93.0002
OpenADSP-v02.6.0.2226.00.0202
eMMC-boot
date/time
My question is to go back to complete stock with fastboot and an external SD, if i'm with mobilicity which rom should i use? OTA or RUU?
Click to expand...
Click to collapse
the ota is a ruu its just the official release over the air aka "ota" not a compiled zip with the necessary files... just flash the file i posted before
I have to do it from fastboot at the moment i'm having device problems. I just want to get it back to complete stock. So use the .zip file or the .exe? Sorry for asking again
eurphoricessence said:
I have to do it from fastboot at the moment i'm having device problems. I just want to get it back to complete stock. So use the .zip file or the .exe? Sorry for asking again
Click to expand...
Click to collapse
the file is already in a .zip format you just need to rename it.. and you dont flash it from fastboot.. when you boot into the bootloader the file should be recognized right away and prompt you to install a "update" which will reset your phone back to ICS stock from t-mobile
Ninjistix said:
the file is already in a .zip format you just need to rename it.. and you dont flash it from fastboot.. when you boot into the bootloader the file should be recognized right away and prompt you to install a "update" which will reset your phone back to ICS stock from t-mobile
Click to expand...
Click to collapse
I am having the same issue as eurphoricessence. My bootloader says the exact same thing:
*** RELOCKED ***
*** Security warning ***
RUBY PVT SHIP S-ON RL
HBOOT-1.93.0002
OpenADSP-v02.6.0.2226.00.0202
eMMC-boot
Now you suggested to use a file for T-Mobile users, we are both on Mobilicity, so I don't think your suggested file will work. So I need some clarification here on how to get to stock ICS, which file do we let the bootloader flash, is it the OTA or the RUU. I downloaded both mobilicity files from this link http://forum.xda-developers.com/showthread.php?t=1617644
Now the RUU is a exe file, while the OTA is a zip file. I have let the bootloader flash both the OTA & the RUU renamed to PH85IMG.zip. The boatloader recognizes the file, I see a blue bar that appears in the top right corner that fills up, and then a brown bar that fills up. But after that, nothing happens. What do we do to get to stock rom?
ihustle50 said:
I am having the same issue as eurphoricessence. My bootloader says the exact same thing:
*** RELOCKED ***
*** Security warning ***
RUBY PVT SHIP S-ON RL
HBOOT-1.93.0002
OpenADSP-v02.6.0.2226.00.0202
eMMC-boot
Now you suggested to use a file for T-Mobile users, we are both on Mobilicity, so I don't think your suggested file will work. So I need some clarification here on how to get to stock ICS, which file do we let the bootloader flash, is it the OTA or the RUU. I downloaded both mobilicity files from this link http://forum.xda-developers.com/showthread.php?t=1617644
Now the RUU is a exe file, while the OTA is a zip file. I have let the bootloader flash both the OTA & the RUU renamed to PH85IMG.zip. The boatloader recognizes the file, I see a blue bar that appears in the top right corner that fills up, and then a brown bar that fills up. But after that, nothing happens. What do we do to get to stock rom?
Click to expand...
Click to collapse
okay the security warning doesn't mean anything.. its just a warning from your phone saying your bootloader was relocked recently... and stock roms are located in my signature now... try the one for mobile city located there the 4.0.3 ICS one there's only 2 ones for ICS and the other is for GB
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
restoring takes a long time after you start it just leave the phone alone untill it reboots... but make sure to try one of the RUU's located in my signature
Ninjistix said:
okay the security warning doesn't mean anything.. its just a warning from your phone saying your bootloader was relocked recently... and stock roms are located in my signature now... try the one for mobile city located there the 4.0.3 ICS one there's only 2 ones for ICS and the other is for GB
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
restoring takes a long time after you start it just leave the phone alone untill it reboots... but make sure to try one of the RUU's located in my signature
Click to expand...
Click to collapse
I tried using your file, i've attached what happens when i do
pic 1) file is detected, blue bar in the right corner fills up
pic 2) after the blue bar is filled up, a brown bar appears and fills up
pic 3) the brown bar filled up, but then nothing happens
i don't know what to do anymore
ihustle50 said:
I tried using your file, i've attached what happens when i do
pic 1) file is detected, blue bar in the right corner fills up
pic 2) after the blue bar is filled up, a brown bar appears and fills up
pic 3) the brown bar filled up, but then nothing happens
i don't know what to do anymore
Click to expand...
Click to collapse
why is the last screenshot of the phone in fastboot? and have you tired the second file listed for Mobilicity? and you know the files have to be on the root of your external sd card not the internal one right?
Ninjistix said:
why is the last screenshot of the phone in fastboot? and have you tired the second file listed for Mobilicity? and you know the files have to be on the root of your external sd card not the internal one right?
Click to expand...
Click to collapse
i've uploaded the correct image for the last screenshot, but what happens is that the files are extracted but then nothing happens after that, it just stops.
the 2nd file is an exe file, so i ran the program through me PC and get the error message in the attached screenshot
and yes, i've been keeping the file on the root of my external SD card
thank you for your continued support, i hope i can get this issue resolved
***EDIT***
So i spent all of last night and today, reading and reading threads until I found this thread that helped fix my problem.
Thank you Ninjistix for your help.
Here's the thread that helped me and may help others.
http://forum.xda-developers.com/showpost.php?p=27058110&postcount=44
HBOOT Error "No image!" for PH98DIAG/PH98IMG after JuopunutBear s-off [HTC REZOUND]
I tried to S-OFF my phone using JuopunutBear, and I succeeded with the wire trick, but afterwards my phone would not boot up. I tried booting HBOOT and noticed the following string of errors:
SD Checking...
Loading...[PH98DIAG.zip]
No image!
Loading...[PH98DIAG.nbh]
No image or wrong image!
Loading...[PH98IMG.zip]
No image!
Loading...[PH98IMG.nbh]
No image or wrong image!
Loading...[PH98IMG.tar]
No image!
Loading...[PH98IMG.aes]
No image!
Loading...[PH98IMG.enc]
No image!
I assume this meant that the kernel was somehow messed up, so I downloaded the appropriate "boot.img" file and tried flashing it using "fastboot flash boot boot.img". It successfully flashed, but the error messages still appear in HBOOT.
I am able to boot into AmonRa recovery, but I get errors at the bottom saying
E:Can't mount /dev/block/mmcblk0p36
(File exists)
E:Can't mount CACHE:recovery/command
...
E:Can't mount CACHE:recovery/log
...When I try to restore from my nandroid backup that I made prior to attempting to root/s-off, I get an error
E:Couldn't open directory /sdcard/nandroid/I believe this error is because of the problems in the kernel (PH98DIAG/PH98IMG files).
I cannot flash a zip from the sdcard because both the sdcard and internal_sdcard appear as completely empty no matter what I do. I have tried and successfully performed an "adb push ROM.zip /" command to put the rom onto the sdcard, but the file would not show up in AmonRa when I tried to flash a zip.
I have tried using all of the commands under the "Wipe" menu in Amon Ra. I have tried formatting data, system, and cache as both Ext3 and Ext4. I have tried using the "FACTORY RESET" command when in HBOOT. I have tried re-installing AmonRa recovery, and I have tried all of these same things using CWM, as well. None of them have produced any forward results.
I am at a loss of things to try to restore my phone to any working state... please help! I just want my phone working again at this point, rooted or not.
Use a card reader and reformat sd card on a pc.
Sent from my ADR6425LVW using Xparent Green Tapatalk 2
I've had that issue before in hboot. You can remove the SD and boot into hboot, the move to recovery
Sent from my Rezound using xda app-developers app
Snuzzo said:
Use a card reader and reformat sd card on a pc.
Sent from my ADR6425LVW using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Thanks so much for the help! I was able to just copy the ROM file I wanted to the external SD card once it was in the PC. I reformatted the SD card first. I flashed the ROM from recovery, and it worked. When I was in recovery and hboot, it still gave me the same error messages, however. Does this mean there is still something wrong with the kernal on the internal SD card? Is there a way I can check to see if the internal SD card is working?
Thanks!
Birkination
Re: HBOOT Error "No image!" for PH98DIAG/PH98IMG after JuopunutBear s-off [HTC REZOUN
When you boot to hboot it always checks for a PH98IMG.zip first and if it's not there you get regular bootloader access, if it is there you get the option to update.
You said you flashed the rom, so did you get booted ok?
Are you trying to flash something via PH98IMG.zip?
If you're s off any of the current roms have the kernel included and you just wipe completely, flash the rom and reboot.
Sent from my ADR6425LVW using xda premium
HTC White Screen
Snuzzo - I need your urgent help.
htc rezound verizon phone was successfully unlocked by me in India. I am stuck at htc white screen.
i try to push Power button and volume down button at the same time and this is what i get ;
****** TAMPERED ********
****** UNLOCKED ********
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012 , 16;47;46
SD Checking...
Loading...[PH98DIAG.zip]
No image!
Loading...[PH98DIAG.nbh]
No image or wrong image!
Loading...[PH98IMG.zip]
No image!
Loading...[PH98IMG.nbh]
No image or wrong image!
Loading...[PH98IMG.tar]
No image!
Loading...[PH98IMG.aes]
No image!
Loading...[PH98IMG.enc]
No image!
I downloaded PH98IMG.ZIP from mediafire and saved in sd card. Inserted the sd card in phone and went to hboot. It says
Main Version is older!
Update Fail!
Press <POWER> to reboot.
Please help me immediately by giving simple instructions. I do not know where the rom is and what it is. I am unable to find the rom. Also how to know whether phone has ics or something else ? I need to get this working as it is not my phone. Also it showed only cdma option, can i get the gsm option to use in India.
The PH98IMG.zip you used is an older RUU. You need on with hboot 2.25 or newer in it since you are s-on. Since you are in India, I assume you cannot take Verizon OTA updates. So best bet is to download one of the mirrors linked below for global RUU.
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
Sent from my Rezound using xda app-developers app
I have unlocked using HTC Bootloader
Uzephi said:
The PH98IMG.zip you used is an older RUU. You need on with hboot 2.25 or newer in it since you are s-on. Since you are in India, I assume you cannot take Verizon OTA updates. So best bet is to download one of the mirrors linked below for global RUU.
[Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
The page says : This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off (method).
I have used htc bootloader unlock tool. Will this version help RUU VIGOR ICS 35 S VERIZON WWE 3.14.605.12 Radio RS 1.22.10.0424r 3622A MR3 9K release 270509 signed.
sgalada said:
The page says : This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off (method).
I have used htc bootloader unlock tool. Will this version help RUU VIGOR ICS 35 S VERIZON WWE 3.14.605.12 Radio RS 1.22.10.0424r 3622A MR3 9K release 270509 signed.
Click to expand...
Click to collapse
It will be CDMA only until you OTA, which means having Verizon service.
Just relock the boot loader, update with global OTA leak then unlock it again.
Sent from my Rezound using xda app-developers app
Relock the boot loader
Uzephi said:
It will be CDMA only until you OTA, which means having Verizon service.
Just relock the boot loader, update with global OTA leak then unlock it again.
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
I messed up with my data, cache and maybe system too. Please let me know whether this is the right procedure to relock the boot loader.
1. Download the fastboot tool from Slacker101 and save it to desktop of your computer.
Fastboot Tool for Rezound
2. Plug in the phone via USB cable to your computer.
3. Go to Settings > Developer Options > Make sure USB Debugging is checked ON.
4. Open the folder called tools and hold shift on your keyboard and right click in a blank area in the folder. Then select Open Command Prompt Here.
5. When the command prompt opens, type the following with hitting enter at the end of each line:
adb reboot fastboot
fastboot oem lock
The above method not happening. Tried it in hboot and now it shows
i try to push Power button and volume down button at the same time and this is what i get ;
****** TAMPERED ********
****** RELOCKED ********
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012 , 16;47;46
SD Checking...
Loading...[PH98DIAG.zip]
No image!
Loading...[PH98DIAG.nbh]
No image or wrong image!
Loading...[PH98IMG.zip]
No image!
Loading...[PH98IMG.nbh]
No image or wrong image!
Loading...[PH98IMG.tar]
No image!
Loading...[PH98IMG.aes]
No image!
Loading...[PH98IMG.enc]
No image!
Shall i update with global OTA leak ? Need your guidance please !
Be sure to give the fastboot commands in fastboot mode. Not in ROM. First command should reboot your phone into fastboot mode
Sent from my Rezound using xda app-developers app
A Big Thank You !
Uzephi said:
Be sure to give the fastboot commands in fastboot mode. Not in ROM. First command should reboot your phone into fastboot mode
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Followed your instructions and the phone works perfectly fine with global mode ! Just wanted to know whether sms sending and receiving will be an issue. i read in some threads that sms, mms does not work. Please advise.
A Big Thank You ! Your timely speedy help was very useful Uzephi.
If you stay stock, you should have no issues.
Sent from my Rezound using xda app-developers app
Uzephi said:
If you stay stock, you should have no issues.
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Hi, so Im this complete noob in the android department and I really need help. I have a Verizon HTC rezound 4G LTE (Korean) and its running on JB( I really dont know which ROM is it). now the thing is that as I got this from someone who was a noob himself, he didn't update the sense so its basically 3.6. I researched a bit and tried updating but my recovery would not detect the file(bootloader's unlocked though). I tried rooting the device but it said I needed something called and insecure boot image which I tried flashing but the bootloader failed to detect the img file.I really dont know what to do at the moment.
my software details:
android version-4.2.1
sense version-3.6
sofware number-4.03.605.2 710 RD
kernel version-3.0 16-g480e1b0 htc [email protected]#1
baseband version- 2.22.100801r, 2.22.10.0803r
Again, I apologize for my stupidity. help would be really appreciated
rafey3.0 said:
Hi, so Im this complete noob in the android department and I really need help. I have a Verizon HTC rezound 4G LTE (Korean) and its running on JB( I really dont know which ROM is it). now the thing is that as I got this from someone who was a noob himself, he didn't update the sense so its basically 3.6. I researched a bit and tried updating but my recovery would not detect the file(bootloader's unlocked though). I tried rooting the device but it said I needed something called and insecure boot image which I tried flashing but the bootloader failed to detect the img file.I really dont know what to do at the moment.
my software details:
android version-4.2.1
sense version-3.6
sofware number-4.03.605.2 710 RD
kernel version-3.0 16-g480e1b0 htc [email protected]#1
baseband version- 2.22.100801r, 2.22.10.0803r
Again, I apologize for my stupidity. help would be really appreciated
Click to expand...
Click to collapse
your version of sense is in the rom...you cant update the sense as its packed inside the rom...if you want updated sense...get a custom recovery and flash a newer sense rom like sun_dreams sense 4.5
Update: I have the stock.img and need the stock zip file... please help that is all i need. i tried the stock RUU but for some reason my computer will not run the application and i don't know any other way to fix my phone other than adding the stock zip file to my phones sd card and installing it thru recovery.
Update: I fix my computer problem with the RUU not starting, it starts now and runs all the way thru then says it's the wrong one. I got the at&t ruu off the htc site.
UPDATE: I got my phone off of ebay, heres what the item was listed under.
SR HTC Desire 610 8GB Black AT&T Unlocked Any GSM 4G LTE Android Smartphone
Model: Desire 610
Bundled Items: 4G LTE May not be compatible with T-Mobile, Doesn't work with Verizon or Sprint
Contract: Without Contract
Lock Status: Network Unlocked
Operating System: Android
Unlock Status: Carrier Unlocked
Color: Black
SO... it's a AT&T Unlocked GSM phone? so what RUU do i need to use?
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I don't know exactly what all you need but here goes nothing.
I unlocked and rooted my phone a few nights ago using, http://forum.xda-developers.com/desire-610/general/info-htcdev-unlock-root-t2844323
also had TWRP recovery installed.
Yesterday i was playing around in recovery mode trying to clean up my phone and restore it to factory settings. I accidentally deleted my system.. and when i try go to reboot it says No OS Installed! Are you sure you wish to reboot?
So i rebooted to fastboot and clicked power down.. and when i try to reboot it, it gets stuck on the HTC start up screen untill my phone dies or i go thru all the trouble to take the battery out.
So i deleted the OS System, and can't boot my phone up. I can get to recovery and fastboot just fine tho.
Bigger problem is, before this happened i had to Factory Restore my computer, so i no longer have any of the files i had to download to unlock and root my phone.
Anyone know what i need to do to be able to use my phone again? I'd really rather not have to go back stock ROM but if it's the only choice i will.
Please help me fix this, I can't go without my phone and I really can't afford a new one right now.
Thank you...
Dawniebear
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
A3_UL PVT SHIP S_ON
HBOOT-3.19.0.0000
RADIO-1.101.1372.19.1121
OpenDSP-v28.2.2.00546.0331
OS-
eMMC-boot 1024MB
Aug 28 2015,16:24:59.0
Try to reboot recovery
Install CM11 or stock ATT ROM from xda.
Move it to device.
Flash in recovery!
If your computer won't detect the 610, put it on USB OTG and connect to phone and flash.
Good luck
magicstick5 said:
Try to reboot recovery
Install CM11 or stock ATT ROM from xda.
Move it to device.
Flash in recovery!
If your computer won't detect the 610, put it on USB OTG and connect to phone and flash.
Good luck
Click to expand...
Click to collapse
That's one of the first things i did.. and i don't know of any other option..
dawniebear said:
That's one of the first things i did.. and i don't know of any other option..
Click to expand...
Click to collapse
Well, then put one of the zip files on an SD card and put it in your phone, and then flash it in twrp, that's what I did when I did the exact same thing lol
dawniebear said:
That's one of the first things i did.. and i don't know of any other option..
Click to expand...
Click to collapse
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
A3_UL PVT SHIP S_ON
HBOOT-3.19.0.0000
RADIO-1.101.1372.19.1121
OpenDSP-v28.2.2.00546.0331
OS-
eMMC-boot 1024MB
Aug 28 2015,16:24:59.0
Well, looking at your 1st post(see exert pasted in above) you have somehow re-locked your bootloader. So the first thing you will have to do is go back through your emails and find the unlock_code.bin file that htcdev emailed you when you first unlocked it and use wndroid or fastboot to to unlock your bootloader again with that code. Recovery won't let you flash back anything while the bootloader is locked.
MiniBlu said:
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
A3_UL PVT SHIP S_ON
HBOOT-3.19.0.0000
RADIO-1.101.1372.19.1121
OpenDSP-v28.2.2.00546.0331
OS-
eMMC-boot 1024MB
Aug 28 2015,16:24:59.0
Well, looking at your 1st post(see exert pasted in above) you have somehow re-locked your bootloader. So the first thing you will have to do is go back through your emails and find the unlock_code.bin file that htcdev emailed you when you first unlocked it and use wndroid or fastboot to to unlock your bootloader again with that code. Recovery won't let you flash back anything while the bootloader is locked.
Click to expand...
Click to collapse
Oh that's why, didn't even see that it said relived, looked real quick, thought it said unlocked, whoops lol
---------- Post added at 03:11 PM ---------- Previous post was at 03:09 PM ----------
MGfusion said:
Oh that's why, didn't even see that it said relived, looked real quick, thought it said unlocked, whoops lol
Click to expand...
Click to collapse
Relocked, not relived
Every tutorial i have tried has said to relock bootloader before using the ruu. oh btw i have fixed the ruu not opening problem but it ran all the way thru then said it was the wrong one. I don't understand, my desire is at&t and i got the at&t ruu from the htc page.
Do i need to go s-off?
Kay
Unlock bootloader again and flash it
Easy
magicstick5 said:
Kay
Unlock bootloader again and flash it
Easy
Click to expand...
Click to collapse
unlock and flash what?
Made a mistake guys, its a AT&T Unlocked GSM phone, so what RUU would i use?
dawniebear said:
unlock and flash what?
Click to expand...
Click to collapse
Since you somehow relocked bootloader, unlock it using windroid.
Then transfer cm11 or stock ATT ROM and flash in recovery
magicstick5 said:
Since you somehow relocked bootloader, unlock it using windroid.
Then transfer cm11 or stock ATT ROM and flash in recovery
Click to expand...
Click to collapse
I know how to unlock my bootloader thru fastboot, but my phone is a at&t unlocked gsm phone what rom do i use? and where to find it.
dawniebear said:
unlock and flash what?
Click to expand...
Click to collapse
follow this step by step
1 - Use windroid tool found here and your unlock_code.bin file to unlock your bootloader.
2 - If you don't still have TWRP installed use the above mentioned windroid tool to install TWRP.
3 - reboot to recovery (TWRP).
4 - Select the "WIPE" button in TWRP and swipe to do a factory reset.
5 - Return to main menu in TWRP and use the "INSTALL" button to install CM11 from here. or the "RESTORE" button to install the stock at&t backup from here.
6 - When instaling 1 of the above follow all instuction from the thread you get the rom from and the then once flashed hit the "WIPE DALVIC AND CACHE" button then reboot.
7 - You will now have a fresh intalation of the rom you chose so just set it up and enjoy.
MiniBlu said:
follow this step by step
1 - Use windroid tool found here and your unlock_code.bin file to unlock your bootloader.
2 - If you don't still have TWRP installed use the above mentioned windroid tool to install TWRP.
3 - reboot to recovery (TWRP).
4 - Select the "WIPE" button in TWRP and swipe to do a factory reset.
5 - Return to main menu in TWRP and use the "INSTALL" button to install CM11 from here. or the "RESTORE" button to install the stock at&t backup from here.
6 - When instaling 1 of the above follow all instuction from the thread you get the rom from and the then once flashed hit the "WIPE DALVIC AND CACHE" button then reboot.
7 - You will now have a fresh intalation of the rom you chose so just set it up and enjoy.
Click to expand...
Click to collapse
Sorry for the late reply i was having some driver issues on my computer, had to wait to borrow a friends. This worked PERFECTLY!! I can't thank you enough!
i have the exact problem my bootloader is unlocked and installed twrp but everytime i try to install something it says failed to mount system, data, cache PLEASE i need some help
sif5812 said:
i have the exact problem my bootloader is unlocked and installed twrp but everytime i try to install something it says failed to mount system, data, cache PLEASE i need some help
Click to expand...
Click to collapse
install older version of twrp. The latest ones don't work. I have attached an older version I had floating around, just unzip it then falsh the image with fastboot.
could you please tell how can i do it,, if its not too much trouble, i installed twrp via windroid, im completely new in this, and i could use some help
sif5812 said:
could you please tell how can i do it,, if its not too much trouble, i installed twrp via windroid, im completely new in this, and i could use some help
Click to expand...
Click to collapse
Just use windroid. First unzip the file I attached. Connect phone to PC. Start windroid. At top of windroid select COMMANDS. FLASH. FLASH RECOVERY. It will open an explorer window, just navigate to where you unzipped the file I sent you and select it. It will then flash the recovery. Once finished reboot to recovery.
Good day sorry to bother you again i tried to do that but now i cant enter recovery mode twrp, i click there but only goes to htc logo for a sec then goes back to fast boot
http://imgur.com/NMe0m0I
http://imgur.com/R8KmRBS
here are some pictures of my screen