ODIN will not go past "boot.img" - Galaxy S III Q&A, (US Carriers)

sits there for 20 minutes and does nothing.
tried to flash the Toolkit's "ALLINONE"
the first time, it seemed to flash, but did not reboot when it said it should.
so i restarted the phone manually. and am trying to flash it again, stuck at boot.img weather or not it's custom or stock rom.
i have tried a few times.

Sorry this post belongs in Q&A
Sent from my SGH-T999 using xda premium

Z0rr0 said:
sits there for 20 minutes and does nothing.
tried to flash the Toolkit's "ALLINONE"
the first time, it seemed to flash, but did not reboot when it said it should.
so i restarted the phone manually. and am trying to flash it again, stuck at boot.img weather or not it's custom or stock rom.
i have tried a few times.
Click to expand...
Click to collapse
Make sure you're posting in the correct forum - Sounds like you're not following the steps correctly, specifically these ones:
In Odin, the COM box all the way to the left should turn blue and it should say Added!! in the Message area.
Click on PDA and in the Open window that pops up navigate to and open the clockworkmod.TAR file you downloaded earlier
Verify that Auto Reboot and F. Reset Time are checked
Click to expand...
Click to collapse
Try doing it this way http://forum.xda-developers.com/showthread.php?t=1726088

most commonly caused by the USB cord. try a few till you get one that works and stick with it.
Sent from my SPH-D700 using xda premium

epicnoob66 said:
most commonly caused by the USB cord. try a few till you get one that works and stick with it.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
it happened to me. it worked when i moved the usb cable to a rear port on the pc instead of the front ports. with the front, i can charge and it will mount on the pc but it will not transfer files.

I have 2 s3's that worked fine with my s2 cable but a third one that kept failing. Switched to the one that came with the s3 and fixed the problem....

Related

[Q] Soft Bricked Vibrant not recognized by pc

Some facts:
My last rom on the phone was CM7
I can get into download mode but I cannot get into recovery
The drivers on my pc (windows 7 x64) are not installed correctly. I've tried the vibrant drivers and Nexus S drivers.
When I boot the phone on I just get the Vibrant/samsung Logo and it just stays there.
Since I can't get into my phone I cant turn on or disable USB Debugging.
I have SDK on my pc with the drivers in the google usb folder but they do not work.
How can I get my pc to recognize the device w/o being able to turn on USB debugging. I'm I stuck even though I can get into download mode?
just keep trying with download mode
took me like 2 hours of trying the other night to get mine to connect when i soft bricked
http://forum.xda-developers.com/showthread.php?t=1046315
drivers are there
kyle51 said:
just keep trying with download mode
took me like 2 hours of trying the other night to get mine to connect when i soft bricked
http://forum.xda-developers.com/showthread.php?t=1046315
drivers are there
Click to expand...
Click to collapse
I don't even know what to say. After 8 straight hours of trying to install drivers and what not I spent the last 15 mins just plugging in and unplugging the phone restarting download mode and probably on the 50th try it just read it. I don't know what it just did. Thanks for the advice!
jayquik03 said:
I don't even know what to say. After 8 straight hours of trying to install drivers and what not I spent the last 15 mins just plugging in and unplugging the phone restarting download mode and probably on the 50th try it just read it. I don't know what it just did. Thanks for the advice!
Click to expand...
Click to collapse
np, glad it worked
my usb on my phone's dodgy, it only charges though usb and only with the usb i got with the phone but doesnt connect to pc as soon as i plug it in, it takes like an hour, so i just have to keep trying when it comes to that
Thanks guys back to fully working phone
I have the same problem. Now this is my first time with this phone as it is a friends. I installed TW bionic rom on her phone with no problem. Then tried the MIUI rom on the first page of the development section then the phone just bootlooped. So after pushing to many buttons in a very noobish move the phone just stays on the vibrant screen. So my question is where do I go from here? I will attempt to try you method to get the laptop to recognize the phone but maybe some links to help me out would be great.
Sent from my DROID2 GLOBAL using XDA App
snowride20 said:
I have the same problem. Now this is my first time with this phone as it is a friends. I installed TW bionic rom on her phone with no problem. Then tried the MIUI rom on the first page of the development section then the phone just bootlooped. So after pushing to many buttons in a very noobish move the phone just stays on the vibrant screen. So my question is where do I go from here? I will attempt to try you method to get the laptop to recognize the phone but maybe some links to help me out would be great.
Sent from my DROID2 GLOBAL using XDA App
Click to expand...
Click to collapse
id say miui's for more experienced users, it uses a different install meathod (same as cm7)
get odin and the pit and tar files (if you havent already)
http://forum.xda-developers.com/showthread.php?t=1047087
power off the phone
open odin
hold volume up and down
plug usb in
or
open odin
pull the phone battery
plug usb in
hold vol up and down
push battery back in (while holding vol buttons)
both of these ways should put you in download mode, if they dont straight away just keep trying and try different ports on your computer
Thanks for the link to that thread. I wasn't having much luck last night finding links that weren't broken. Downloading the rest of the files now so ill post back soon with results. Odin finally recognized the phone so I think this should go well. Not sure what I did wrong flashing MIUI, its not my first time running the rom just never used a vibrant before.
Sent from my DROID2 GLOBAL using XDA App
make sure factory reset isnt checked in odin, unless you want to wipe everything
always checked in mine for some reason, didnt notice last time and lost all my angry birds lol
Thank you very much for posting that link. It should honestly be stickied for all to find more easily since the one that is currently stickied has dead links. Everything worked, managed to reboot and reinstall team whiskey bionic rom then restore the last back up I made. If it wasn't for these forums I don't know where I would be.
Sent from my DROID2 GLOBAL using XDA App
snowride20 said:
Thank you very much for posting that link. It should honestly be stickied for all to find more easily since the one that is currently stickied has dead links. Everything worked, managed to reboot and reinstall team whiskey bionic rom then restore the last back up I made. If it wasn't for these forums I don't know where I would be.
Sent from my DROID2 GLOBAL using XDA App
Click to expand...
Click to collapse
it is, noob guide - root, odin, flash..........
the link's in there
Somehow I missed it but thanks again
Sent from my DROID2 GLOBAL using XDA App
right at the top
NOOB GUIDE: HOW TO ROOT/ODIN/FLASH/RECOVER ** 04/28/11 W/ Videos **
Originally Posted By: s15274n

Bricked stock fascinate with red text at stock recovery

i have the same problem as these ppls can you please help me?
http://androidforums.com/samsung-ga...red-error-msgs-but-volume-keys-dont-work.html
more info, i bought it off ebay, thinkin i could fix it well here i am.
it boots into stock recovery and gives me some errors i cant read then there to fast lol the only button that works in the recovery is the home button, the up and down doesnt work. hemdall nor odin wont detect my phone while its in download mode
what should i do
Kaptinkrunk said:
more info, i bought it off ebay, thinkin i could fix it well here i am.
it boots into stock recovery and gives me some errors i cant read then there to fast lol the only button that works in the recovery is the home button, the up and down doesnt work. hemdall nor odin wont detect my phone while its in download mode
what should i do
Click to expand...
Click to collapse
Droidstyles guide in the general section.. You need to Odin back to stock
Sent from my SCH-I500 using xda premium
1. phone off and battery out.
2. usb cable pugged into pc ONLY.
3. hold volume down and insert usb cable.
4. Download mode will start.
5. Odin an eh03 ROM and profit.
bobloblaw1 said:
1. phone off and battery out.
2. usb cable pugged into pc ONLY.
3. hold volume down and insert usb cable.
4. Download mode will start.
5. Odin an eh03 ROM and profit.
Click to expand...
Click to collapse
He also needs the pit v2.2. And to check the repartition box
And use pda pda pda PDA to flash roms in odin.. If you use"phone" you won't have a phone anymore
Sent from my SCH-I500 using xda premium
thank you guys but i know that much and i figured it out after tearing the phone apart, its the charger port several of the copper post were bent and broke enough to charge but ya cant flash till i fix that i ordered the part off ebay as soon as i figured it out. my og droid will have to work till i get the fazzy working. oh i know how to that much with the phone it just wouldnt connect to my pc what so ever, i have one of those JIGS and it sends it straight to DL mode ill up date if i get it working ummmm would yall know how to go about fixing that part? charger port that is?
neh4pres said:
He also needs the pit v2.2. And to check the repartition box
And use pda pda pda PDA to flash roms in odin.. If you use"phone" you won't have a phone anymore
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
lol ive already used odin on a fascinate, it just wouldnt connect to my pc, my gf has the same phone i put the gummy rom on and luved it so i wanted one well ya i boght a broke one lol
Try heimdall on linux. Sometimes it yields better results I have had the best luck with it running from console as root. I have been to the red text with errors and back
miked63017 said:
Try heimdall on linux. Sometimes it yields better results I have had the best luck with it running from console as root. I have been to the red text with errors and back
Click to expand...
Click to collapse
thanks but the problem was the charger port ordered 2 ports ended up breaking the mobo in sorts ripped the connectors for the port off ugh bought another phone in hopes of good mobo and charger port
edit: i got it fix just bought a broken phone with broke lcd so swapped mobo odin back the fresh start now. man i luv samsungs and nearly unbrickable. i had a d3 brik on a frind and a vibrant around the same time i fixed the vib but not the d3 had to have it replaced both were stock software error

I've managed to KILL my S3!!!! (D'oh)

So I've been happily flashing the JB files, and phone was doing great. Tonight I came across a couple of programs, Root Explorer and Root Toolkit. Put both on my phone, everything is still OK.
Looking through the Toolkit, I see that you can update fonts to the phone, so being that type of guy, I picked one and went to install it.
Big Mistake? The phone went to reboot, and is now stuck at a nice blue SAMSUNG logo, and won't do anything.
Of course, I hadn't done a back up, so thinking a way around the problem (I'm at work, not on my own PC), I redownloaded the last update (DLI8) with Odin. Ran Odin off a flash drive, then went to connect the phone (brick) to the PC. The PC's (tried on 3 of them) all say that the device connected is a GADGET SERIAL (?) and is not recognised by Odin.
So, I know that I will try when I get home in the morning. But am I missing something else, something that I have not tried? (except some brain cells!!!!) Is it because Odin can't be ran off a flash drive? Is the S3 well and truly dead? Should I smash it and claim on warranty?
causbrite said:
So I've been happily flashing the JB files, and phone was doing great. Tonight I came across a couple of programs, Root Explorer and Root Toolkit. Put both on my phone, everything is still OK.
Looking through the Toolkit, I see that you can update fonts to the phone, so being that type of guy, I picked one and went to install it.
Big Mistake? The phone went to reboot, and is now stuck at a nice blue SAMSUNG logo, and won't do anything.
Of course, I hadn't done a back up, so thinking a way around the problem (I'm at work, not on my own PC), I redownloaded the last update (DLI8) with Odin. Ran Odin off a flash drive, then went to connect the phone (brick) to the PC. The PC's (tried on 3 of them) all say that the device connected is a GADGET SERIAL (?) and is not recognised by Odin.
So, I know that I will try when I get home in the morning. But am I missing something else, something that I have not tried? (except some brain cells!!!!) Is it because Odin can't be ran off a flash drive? Is the S3 well and truly dead? Should I smash it and claim on warranty?
Click to expand...
Click to collapse
erm did you put your phone in download mode by pressing Home + Volume Down + Power before using odin?
Whilst holding the power button, hold volume down button also. This puts phone in download mode. Odin will now recognize it, assuming you've got the drivers installed.
Read the sticky threads thoroughly and you'll solve this in no time.
Sent from my GT-I9300 using Tapatalk 2
Meemo23 said:
erm did you put your phone in download mode by pressing Home + Volume Down + Power before using odin?
Click to expand...
Click to collapse
Daelyn said:
Whilst holding the power button, hold volume down button also. This puts phone in download mode. Odin will now recognize it, assuming you've got the drivers installed.
Read the sticky threads thoroughly and you'll solve this in no time.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yes, in Download mode, PC's just sit there, so am thinking that because they are works ones (that I can't install drivers on) that I'll have to wait until I get home.:crying:
Fingers crossed
Managed to get the drivers installed on a work PC, running Odin, eventually connected to the phone, is currently saying 3minutes to finish. Blue bar is getting bigger. Hopefully by the time someone else reads this thread the problem will be solved.
Let this be a warning to all NOOBs (like me). BACKUP, BACKUP BACKUP
EDIT: IT WORKED. Now just to set it all up again how I like it......
Most work PC's are locked down so people can't install stuff on them that can cause the company problems.
Be VERY careful trying to do anything on a work PC as you may, inadvertantly, wind up with a brick.
Remember, just because its your work PC DOESN'T mean its YOUR PC....
ultramag69 said:
Most work PC's are locked down so people can't install stuff on them that can cause the company problems.
Be VERY careful trying to do anything on a work PC as you may, inadvertantly, wind up with a brick.
Remember, just because its your work PC DOESN'T mean its YOUR PC....
Click to expand...
Click to collapse
Yes, I know. It was a contractor PC, so not connected to our network. So no harm done. Phone staerted up great, but after a reboot lost all contact details, am in the process of getting them all back with that software from Samsung called "Kies" which is not playing very well at the minute. We live and learn.
I killed my s3 too while playing pokemon. It just suddenly reboot and stuck in boot logo with some white distorted line. I panic and plug out the battery and tada, phone dead. Can't even go into download mode.
Sent from my GT-I9300 using xda premium
causbrite said:
Yes, I know. It was a contractor PC, so not connected to our network. So no harm done. Phone staerted up great, but after a reboot lost all contact details, am in the process of getting them all back with that software from Samsung called "Kies" which is not playing very well at the minute. We live and learn.
Click to expand...
Click to collapse
Next time root your device and perform a nandroid backup..
Sent from the iPoop killer ==>>>
---------- Post added at 07:23 PM ---------- Previous post was at 07:22 PM ----------
eddydo said:
I killed my s3 too while playing pokemon. It just suddenly reboot and stuck in boot logo with some white distorted line. I panic and plug out the battery and tada, phone dead. Can't even go into download mode.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Try going into recovery.. Vol up+power+home..
Sent from the iPoop killer ==>>>

[Q] Major issues all programs stopping!!!!

When I turned on my i9300 galaxy III phone last week it prompt me for an upgrade. I installed it and as soon as it booted again, every single app started to issue warnings about stopping. The phone cycles through all of these pop up warnings over and over again and never reaches the home screen.
What I have tried:
Plugged it to PC open Kies - drivers were not installed correctly, Kies didnt connect.
Ran troubleshooting (unplugged phone b4) connected phone again Kies didnt connect.
Restarted the phone in d/l mode --> wipe data/factory reset, this time the drivers were installed correctly but Kies didnt connect again.
Unplugged phone open Odin and it didnt recognize the phone either.
Tried 2 different cables switched USB ports and nothing!!
PC recognizes the phone but it wont let me see content in windows explorer.
Please help me, thanx in advance. :crying:
Pacbert
seems you need to get on another Rom
why not try odin
or root and get CWM and flash a custom Rom
Blackwolf10 said:
seems you need to get on another Rom
why not try odin
or root and get CWM and flash a custom Rom
Click to expand...
Click to collapse
I cant root the phone or how do I install another ROM. Odin doesnt recognize the phone, I plug it in and nothing happens
so I have no options how to connect to the cell phone.
Pacbert said:
I cant root the phone or how do I install another ROM. Odin doesnt recognize the phone, I plug it in and nothing happens
so I have no options how to connect to the cell phone.
Click to expand...
Click to collapse
For ODIN to recognize the device you must first go into Download Mode and you need to shutdown the device first then do this hold home+vol down+then power button)
You don't need root to use ODIN though. If you want to revert to stock see the instructions here: http://forum.xda-developers.com/showthread.php?t=1646610 it's pretty straightforward anyway so i guess you won't do something unnecessary.
As you were upgrading legitimately, take it back to vendor or Samsung and get them to sort it
SignetSphere said:
For ODIN to recognize the device you must first go into Download Mode and you need to shutdown the device first then do this hold home+vol down+then power button)
You don't need root to use ODIN though. If you want to revert to stock see the instructions here: http://forum.xda-developers.com/showthread.php?t=1646610 it's pretty straightforward anyway so i guess you won't do something unnecessary.
Click to expand...
Click to collapse
Yes I did that, I said that in my first post. I put the phone into d/l mode but Odin doesnt recognize the phone, that is my major issue here.
Neither Kies nor Odin recognizes the phone. PC installs drivers correctly and knows when its plugged in but thats about it
slaphead20 said:
As you were upgrading legitimately, take it back to vendor or Samsung and get them to sort it
Click to expand...
Click to collapse
They take a long time to respond, but yea if nobody here can give me a solution thats what Im going to do.
Nobody has a clue?
Simple test.. Tried another pc?
Sent from my Nexus 7 using xda app-developers app
realwillow said:
Simple test.. Tried another pc?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Tried 3 different and nothing
Pacbert said:
Tried 3 different and nothing
Click to expand...
Click to collapse
you can try mobile odin then though it costs a few bucks but does a great job
Blackwolf10 said:
you can try mobile odin then though it costs a few bucks but does a great job
Click to expand...
Click to collapse
I don't think there's much chance of him being able to use mobile Odin if you read the OP
slaphead20 said:
I don't think there's much chance of him being able to use mobile Odin if you read the OP
Click to expand...
Click to collapse
Yea maybe phone has no chance at all and I probably need to replace it.

Reviving a dead L9

Hello,
I've read numerous times about people being able to restore their dead bricked phones. No button combination will get my LG Optimus L9 P769 (T-mobile) to turn on. I think bricked it while trying to complete a carrier unlock. I understand that I can try to restore my phone through either fastboot or kdz. For fastboot, I was able to install the omap driver, but you know how I'm supposed to install a second driver? Well, I can't seem to do that. Maybe I'm doing something wrong? I would love an explanation of how to install the driver a second time. I know I'm doing something wrong, because when I use the fastboot script to flash the xloader and uboat, I just get "waiting for device." Also, if I want to flash a kdz, do I need fastboot drivers? I feel like my success depends on installing the fastboot drivers properly, but my computer and two others would not let me do that.
I'm really new to this stuff, so any help is appreciated! Also, please excuse me if I'm using the terminology incorrectly. Like I said, I'm new to all this.
Thank you in advance!
To install a kdz, you need to be in upgrade mode. Hold the volume up button then connect it to the computer.
Sent from my LG-P769 using XDA Premium 4 mobile app
LaDY Vengeance said:
To install a kdz, you need to be in upgrade mode. Hold the volume up button then connect it to the computer.
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What if the phone doesn't turn on? Does it still go into upgrade mode?
Yes.
Sent from my LG-P769 using XDA Premium 4 mobile app
LaDY Vengeance said:
Yes.
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok thanks! I shall try later!
Did it work? I think you should Do fastboot.. that's what I used when mines didn't power on..
Sent from my LG-P769 using XDA Premium HD app
Linux
Get a live linux distribution and try this:
http://vincenzoml.blogspot.it/2013/08/lg-l9-unbrick-script.html
LaDY Vengeance said:
Yes.
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello,
So I finally tried what you said, but it didn't work. Which program should I use to flash the kdz? Also, when I press up, should the phone have the battery inserted or not? When I tried the KDZ Updater, it said phone was not found.
simfate said:
Hello,
So I finally tried what you said, but it didn't work. Which program should I use to flash the kdz? Also, when I press up, should the phone have the battery inserted or not? When I tried the KDZ Updater, it said phone was not found.
Click to expand...
Click to collapse
You need to install ICS x and u boot then flash KDZ by offline method.
Nathan.7118391 said:
You need to install ICS x and u boot then flash KDZ by offline method.
Click to expand...
Click to collapse
Hello, I can't get into fastboot. It may be that the phone battery does not have a charge and so the fastboot script does not recognize it when I insert it into the phone after 4 seconds. Could that be a possibility? Because I tried everything, tried many different timings many times, to no avail!
simfate said:
Hello, I can't get into fastboot. It may be that the phone battery does not have a charge and so the fastboot script does not recognize it when I insert it into the phone after 4 seconds. Could that be a possibility? Because I tried everything, tried many different timings many times, to no avail!
Click to expand...
Click to collapse
I was just in the same boat as you and pretty much gave up hope but finally got fastboot working and flashed ics x and u and bam it worked like a charm on offline flash method. You just have to pit usb cable in phone w/o battery in and go to device manager. When you see it popup under other devices right click and press install driver. Make sure you have electronic signatures disabled or it will give a error and not install. This is what prevented me from getting it to work the first 100 times! Now run CMD. TYPE CD C:/FASTBOOT < OR C:/ W/E FOLDER NAME IT IS. THEN RUN START.BAT. < OR W/E THE .BAT FILE INSIDE YOUR FILE IS NAMED. Now press enter. It should prompt to plug in phone. I put my battery in as soon as plugged in and it worked. Now Choose option 5. Let it do its thing. Now go reinstall driver as done before to be safe. Then remove your battery. Hold volume + button and plug usb in. S/W upgrade mode should come up. Slide your battery in and proceed to the offline flash method to flash you kdz file. Should be alive again! Mine was tricky going into sw upgrade mode. Sometimes it came right up then sometimes it took 4 or 5 tries so dont give up! Goodluck and you can do it! I almost gave up I felt so hopeless about getting it to work then it finally worked like a charm!
lwg45714 said:
I was just in the same boat as you and pretty much gave up hope but finally got fastboot working and flashed ics x and u and bam it worked like a charm on offline flash method. You just have to pit usb cable in phone w/o battery in and go to device manager. When you see it popup under other devices right click and press install driver. Make sure you have electronic signatures disabled or it will give a error and not install. This is what prevented me from getting it to work the first 100 times! Now run CMD. TYPE CD C:/FASTBOOT < OR C:/ W/E FOLDER NAME IT IS. THEN RUN START.BAT. < OR W/E THE .BAT FILE INSIDE YOUR FILE IS NAMED. Now press enter. It should prompt to plug in phone. I put my battery in as soon as plugged in and it worked. Now Choose option 5. Let it do its thing. Now go reinstall driver as done before to be safe. Then remove your battery. Hold volume + button and plug usb in. S/W upgrade mode should come up. Slide your battery in and proceed to the offline flash method to flash you kdz file. Should be alive again! Mine was tricky going into sw upgrade mode. Sometimes it came right up then sometimes it took 4 or 5 tries so dont give up! Goodluck and you can do it! I almost gave up I felt so hopeless about getting it to work then it finally worked like a charm!
Click to expand...
Click to collapse
I have a question, can a computer detect the phone with the battery in it? Like the omap4430 usb device? Because for me, the computer detects it whether the battery is in or not... both ways.
simfate said:
I have a question, can a computer detect the phone with the battery in it? Like the omap4430 usb device? Because for me, the computer detects it whether the battery is in or not... both ways.
Click to expand...
Click to collapse
Yes it will detect it. However you need to install the omap in two different locations for it to work.
Sent from my LGMS769 using XDA Premium 4 mobile app
kuma82 said:
Yes it will detect it. However you need to install the omap in two different locations for it to work.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The problem is, I can't install the driver in the second location because it doesn't come up in device manager.. I was thinking maybe there's a problem with the battery, like it doesn't have a charge or something. Because when I run fastboot it doesn't detect the battery no matter what timing I used. I tried everything. If I use the old fastboot script and I get to "fastboot? y or N" and I enter y, it keeps asking the same question.
simfate said:
The problem is, I can't install the driver in the second location because it doesn't come up in device manager.. I was thinking maybe there's a problem with the battery, like it doesn't have a charge or something. Because when I run fastboot it doesn't detect the battery no matter what timing I used. I tried everything. If I use the old fastboot script and I get to "fastboot? y or N" and I enter y, it keeps asking the same question.
Click to expand...
Click to collapse
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in.
---------- Post added at 04:16 AM ---------- Previous post was at 04:11 AM ----------
simfate said:
The problem is, I can't install the driver in the second location because it doesn't come up in device manager.. I was thinking maybe there's a problem with the battery, like it doesn't have a charge or something. Because when I run fastboot it doesn't detect the battery no matter what timing I used. I tried everything. If I use the old fastboot script and I get to "fastboot? y or N" and I enter y, it keeps asking the same question.
Click to expand...
Click to collapse
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in, this should make the driver pop up.
kuma82 said:
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in.
---------- Post added at 04:16 AM ---------- Previous post was at 04:11 AM ----------
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in, this should make the driver pop up.
Click to expand...
Click to collapse
Yes, i've read that post (I think I've read everything on xda related to fastboot!) I don't get an inverted fastboot on the phone's screen. My phone doesn't turn on at all.. Like I said, I'm still struggling to get into fastboot.
Could be a problem with the battery? I'm going to get an external battery charger and try charging the battery.
simfate said:
Yes, i've read that post (I think I've read everything on xda related to fastboot!) I don't get an inverted fastboot on the phone's screen. My phone doesn't turn on at all.. Like I said, I'm still struggling to get into fastboot.
Could be a problem with the battery? I'm going to get an external battery charger and try charging the battery.
Click to expand...
Click to collapse
How did your device get in this state? Depending on what happened your device may not be fixable.
Sent from my LGMS769 using XDA Premium 4 mobile app
kuma82 said:
How did your device get in this state? Depending on what happened your device may not be fixable.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It died after I plugged it into the computer. I never rooted it and has the stock software. Before dying I also carrier-unlocked it using a cheap code from ebay.

Categories

Resources