Related
Hey guys, with my touch hd, i like using my in-ear headphones although they are far too loud when using the music player tab in manilla. how can i put the volume down?
try searching, there's already a thread about this.
as far as i know, that thread suggests using advanced config to set the music player value low. Setting it to 1 still makes it rather loud for a minimum sound level and so this doesnt really solve my problem.
also, with the audio booster enabled, how do i change the overall volume?
the only way ive been doing this is by creating profiles with various changes to the overall db values (ie subtracting and adding 1 from total, 2, 3 etc.) but this is a long process and id have to do it for every config.
any ideas?
Lowering the Volume
ASK768 said:
as far as i know, that thread suggests using advanced config to set the music player value low. Setting it to 1 still makes it rather loud for a minimum sound level and so this doesnt really solve my problem.
also, with the audio booster enabled, how do i change the overall volume?
the only way ive been doing this is by creating profiles with various changes to the overall db values (ie subtracting and adding 1 from total, 2, 3 etc.) but this is a long process and id have to do it for every config.
Click to expand...
Click to collapse
This maybe a bit simplistic and you may have tried it, but why don't you take all the frequencies down to -6 in the Audio Booster? This in theory should drop the overall volume by -6db? The other thing I did was buy high impedence earbuds which where 150ohms, but ear buds are not everyones thing. I don't like "in the ear" phones myself. I have some yuin PK1's....they are superb HiFi.
If the music is too loud, you can edit the registry to fix it:
Local_machine\software\HTC\AudioManger_eng\Config\ music_player_volumn
Change the DWORD to 10 or lower and soft-reset the mobile
(Original value is hexadecimal: 64 or Decimal: 100)
You have just decreased the maximum music player volume in TouchFLO3D
Here is another tip.
If you want the phone to remember the last volume used with headphones, so that the next time you plug them in, they will automatically play at that last volume, you can also do this in the registry. The only problem with this particular tip, is that after every soft-reset, you'll have to enter the changes again in the registry.
But here is how to do that:
Local_machine\software\HTC\VolumeOverlay\SavedHand SetVolume
Change DWORD to 0
ASK768 said:
Hey guys, with my touch hd, i like using my in-ear headphones although they are far too loud when using the music player tab in manilla. how can i put the volume down?
Click to expand...
Click to collapse
How about using your Stylus (or finger) to lower at minimum?
Rgds,
huh?
Why would you edit registry etc?
Whats wrong with the up/down volume keys or as stated the volume icon in taskbar?
homer285 said:
huh?
Why would you edit registry etc?
Whats wrong with the up/down volume keys or as stated the volume icon in taskbar?
Click to expand...
Click to collapse
In some cases, (and I had this problem), even having the volume at just a couple of bars was pretty darn loud. That meant that it didn't give you much room to play around with a decent volume range. Basically, you knew you never needed the volume louder than just a few bars. If you wanted to rock out - it was fine. But if you wanted to listen to music at a soft volume, it was not that easy. If you turned it down a bar or so, it would drop the volume quite a bit and another bar down meant no more volume. Also, the side buttons drop the volume faster than if you use your stylus. So, that meant that using the buttons sometimes dropped the volume from loud to mute in one press. So, I had to take the stylus out every time to carefully lower the volume just a bar or two. And that gets annoying.
So by making the registry adjustment, you are basically setting your desired max volume to be at the top of the bars. Now you have whole range of bars to slowly drop the volume down when you want to listen to softer music.
Not everyone has this problem. I had it with my stock ROM, but once I started using Dutty's ROMs, I never had a problem with it.
I see, 5 mins out of box Dutty's ROM on my HD
This problem went away since i switched over to kwbr's Topix a while ago. It seems to be a result of some headphones having a higher sensitivity to others, so they interpret the same electrical signal into a louder sound, hence why HTC try to eliminate the problem by giving a set of headphones which are known to be the right sensitivity.
also, once i have the volume all the way i have it, how can i change the volume? when using the audio booster, the volume control no longer works
ASK768 said:
also, once i have the volume all the way i have it, how can i change the volume? when using the audio booster, the volume control no longer works
Click to expand...
Click to collapse
I don't understand your question.
However, when I use the audio booster, I can still use the volume buttons as usual. Do you have anything else installed that could be interfering with it? For example software to map buttons?
I think you should use WMP to play, easier to adjust the volume
Try using one of these:
http://www.mobilefun.co.uk/apple-iphone-stereo-handsfree-adapter-p15226.htm
Works well, microphone and answer button work, and has a volume slider so you can tweak volume as required.
Running nookie, volume is still a bit low on max, any tricks to boost it??
+1
10char
I'm running cyanogen and this is annoying the hell out of me as well. the speaker on the back is amazingly quiet. It was the same with every version rom/android I've put on this thing. I'd switch to a particular one if the need be, to fix this problem. DSPmanager only slightly improves things.
Mort player has an equalizer option, and after setting the sliders all the way up gives me a much improved volume. Just use the sliders judiciously so that the sound does not flutter. Its a tiny speaker after all, so can't expect much.
Can u install dspmanager on nookie emmc rom??
Hello all,
I searched on the forum and the closest anyone had to my problem was having no phone audio at all.
The issue I am having is my key presses in the dialer make no noise when placing the call and no noise while on the call.
Example is I call at&t and I press 1 for this or 0 for that and the keys make no noise so Im not sure if the autophone system is registering my choices.
I am on stock rooted rom and shouldn't have any apps that effect the dialer.
I have checked in the settings and the options are checked for it to make sounds and vibrate on keypress.
Any help or suggestions are appreciated.
Make sure your system volume is up and that "Audible touch tones" is checked.
This is my fourth android phone btw. I've checked all the obvious stuff for why I wouldn't be hearing it. All the other keys in every other app work as they should.
Well the only reasons you wouldn't be hearing the keytones on a stock ROM is either the setting is unchecked or that the volume for system sounds is off. I am on a custom ROM and the sounds are working. So this would mean the issue is one of those, or for some reason files got corrupted. Back up your stuff, and try restoring your phone to factory settings.
So I switched my keyboard from the stock samsung to the stock android and now it works without having changed anything else. This is weird.
I have always found it annoying that I am not able to hear tones dialed while in a call on the GS2.
On my Captivate this was an option, and it actually worked.
On the GS2 there is an option for audible touch tones, but it must only control tones when dialing a number, but not while in a call (ie. when using an automated system etc).
SOLUTION FOUND - TESTING -> http://forum.xda-developers.com/showthread.php?t=1411317
I'll provide a better tutorial for those interested when im done testing it ;-) seems i can build a custom Framework.jar with edited volume increments.
I'm running cm7 from cm9, I listen to alot of music during the day and night but I find the volumes at the high end of the range perfect but the volumes down the low end to stark.
The gaps between 0 and 1 is no sound and then considerably loud in a quiet environment, is this a kernel related volume incriment or set by the code in cm7 somewhere?
I can't find an app to add what I'd call analouge volume control ( finer increments in DB from 0 to MAX)
Any ideas guys?
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------
Deleted...
not to threadjack but how do you even use the high volume? at a volume level of 1 with my TripleFi 10 Pros is as loud as I wanna get.
I plug my SGS2 into the car and I can't go anywhere above 1/4. It's as loud as my Nexus S on FULL, and same with my iPod touch. the sound output is ridiculously loud.
Deleted...
MistahBungle said:
This is a well known (and annoying because I use a rom that's a CM derivative) issue. I've learned to live with it & don't really want to run a standalone app just to give me fine control of volume levels, however, I found this on my travels recently. I haven't tried it, but this might be a good starting point for apps to try.
Click to expand...
Click to collapse
Nice find I tried about 8 apps last night, also considered a voodoo sound esque fix but we know the sgs2 has not got the correct hardware.
unless there is a voodoo sound kernel for cm7 out there but all kernels I try with cm7 give me a corrupt boot to the boot logo and then crashes and I have to hard reset.
CM7 is horrid for 3rd party Kernel support.
MistahBungle said:
Since I started using the app in my sig, I only need volume on around 25-30% thru in-ears. Before that I'd have it on 80% or so. SGS2 (maybe not all, could be manufacturing variations .
Thats what i see manufacture variations .
Stock phone stock headphones no sound change apps volume level at 50% is far to high on my phone . Its an original day one released phone .
jje
Click to expand...
Click to collapse
Deleted...
MistahBungle said:
Supercurio has released Voodoo Louder for SGS2 which also boosts headphone/headset volume (by 6dB), but it doesn't give you that fine volume control.
And as JJE said in his post, with the experiences reported by SGS2 owners on here, this volume issue would appear to be a manufacture issue/dependent on which 'batch' your phone came from.
Click to expand...
Click to collapse
I'd like to call that unreliable information, as I never had this issue with Cognation ROM, its only become a issue with the Current CM7.1.
I'd take a look into this but I have no experience into editing the android system short of using command sin Terminal Emulator and ADB.
There must be a scale somewhere that relates to the number of volume increments and the DB output, after all there is a law regarding maximum volumes of devices in the EU and OEM's adjust there in their hardware dependant on Region, so the DB values can be adjusted some how, I just need to know where i can find it.
EDIT : This works on some handsets not my SGS2 !
Dial in *#*#197328640#*#*
Next, tap your finger onto the following, in the following order:
[5] Audio
[1] Handset
[1] Volume
[1] SRS Speech RX Volume
next notice the following defaults that pop up.
[0]0_lvl:63
[1]1_lvl:68
[2]2_lvl:73
[3]3_lvl:78
[4]4_lvl:83
[5]5_lvl:88
This basically means, that your volume up and down keys have 5 clicks, starting from the lowest setting, and click your volume up 5 times, takes you through the sequence of volumes listed above. You can change each click to be a new volume setting. For me 1-4 are fine, I just wanted max volume, which is click number 5, to be something higher. The phone does not let you to put in half increments, meaning 88.5 is not possible. So you have to use increments of 1. Please please do this carefully, dont suddenly jump to 95, you could blow out your speaker possibly. So I tried just 1 increment above 88, went to 89, and perfect, much louder now! okay so this is how you do it:
Once you get the list above, do the following:
Click your finger on [5]5_lvl:88
Next, a screen pops up asking for input. On the bottom of your phone, tap the menu button, this is the button next to the little home button.
Next tap "key input"
Next tap 1 increment at a time, lets start off with 89 so where it says enter value, tap this, your keyboard pops up, type in 89
Next Tap your menu button again
Next Tap "end"
you are now finished, make a phone call and see how 89 works for you, when your volume is set to max
Remember this volume adjustment seems to reset after you reboot the phone. Some people online are saying you can also make the volume higher by playing with the hearing aid settings, I personally haven't tried this yet.
Deleted...
MistahBungle said:
You can call the volume loudness issue anything you want. But given the experiences of people who have posted here over the past however many months, that is what these experiences suggest.
This is what JJE & I were talking about when we mentioned the manufacture thing.
Not the fine volume issue.
Indeed, that seems to be prevalent on CM based roms. I don't recall having any problems increasing volume in small increments for the < 1 week I ran stock firmware on my phone after I bought it.
As I've said, it's not a big enough deal for me to use a standalone app, so it's definitely not a big enough deal for me to muck around with dialer codes. I saw these codes months ago before I even bought my phone, and never bothered with them. The fine volume control doesn't really bother me, I just thought I'd reply to you OP given you were after an app that enables same, and I'd found the app I gave you a link to recently.
Click to expand...
Click to collapse
That app did nothing, I used it and it gave me the same options as DSP gives you from CM.
The not high enough volume issue can easily be solved in CM7 but comment about that has hijacked my thread, im looking into how we can edit the fine volume adjustment or edit the increments to go from MAX to MIN volume.
Service codes don't appear to work on my handset ( CM related ? ) but I believe the service mode is built into the framework.
I find I can't lower the notification volume and ringtone volume low enough.
Does anyone know how to change the volume steps? I have sound assistant but it only works for media volume...
I'm rooted if it helps and I've tried the AOSP based rom solution of changing the build prop but with no success.
Thanks for any help!
Have you tried "sound assistant" app. It is from Samsung and has function you are looking for.
Chaudhry69 said:
Have you tried "sound assistant" app. It is from Samsung and has function you are looking for.
Click to expand...
Click to collapse
If you check the original post you'll have your answer lol
EmRav said:
If you check the original post you'll have your answer lol
Click to expand...
Click to collapse
Ah my bad, don't know how I missed it. It is possible in two ways:
01- Get a custom kernel with volume modification support. I use a Galaxy S7edge with Surround sound, this makes the sound loud and more immersed but it has a drawback. The low threshold of volume is too high same as yours. I usually have a problem with the in-call earpiece audio which is too loud for me. I use MoroKernel and luckily a recent update brought the feature of MoroSound providing fine control over gains of 2-microphones, earpiece, and main speaker. You can also look for a kernel with such features for your device.
02- Manually modifying the sound configuration files. That is a bit difficult but good research with a bit of experimenting will eventually get you there.
Chaudhry69 said:
Ah my bad, don't know how I missed it. It is possible in two ways:
01- Get a custom kernel with volume modification support. I use a Galaxy S7edge with Surround sound, this makes the sound loud and more immersed but it has a drawback. The low threshold of volume is too high same as yours. I usually have a problem with the in-call earpiece audio which is too loud for me. I use MoroKernel and luckily a recent update brought the feature of MoroSound providing fine control over gains of 2-microphones, earpiece, and main speaker. You can also look for a kernel with such features for your device.
02- Manually modifying the sound configuration files. That is a bit difficult but good research with a bit of experimenting will eventually get you there.
Click to expand...
Click to collapse
Any chance you know how to mod the sound config files on an S21? Unfortunately there are no custom kernels yet for the Exynos version
EmRav said:
Any chance you know how to mod the sound config files on an S21? Unfortunately there are no custom kernels yet for the Exynos version
Click to expand...
Click to collapse
Yes, go to /etc/mixer-gains.xml and edit it. Drawback is your device entire volume range will be affected like for media and stuff. One more way and probably the more practical one just hit me.
Find your ringtone and notification tone from /system/media/audio/ or download them from google and use a software like Audacity or Adobe Audition to reduce their volume.
You reduce your phone's volume to the lowest and match pc's volume with it. Then reduce the audio gain in the software until you feel comfortable with it. Export it and use it.
For anyone interested. My solution ended up being the following, with my end goal being too optimize my audio with Dolby and have the volume still be lower (but optimized) on the phone speaker.
I tried a ton of different apps, a few magisk volume steps modules, ViperFX with Dolby and finally I found a good solution.
Turn off the default Dolby stuff on the phone.
Install Dolby Atmos ZTE A2019 PRO for magisk (google it and find it on GitHub).
Reboot.
Install JamesDSP from ZackPTG5's website.
Reboot.
Install Audio Modification library to use Dolby and JamesDSP at the same time.
Reboot.
Create a custom equalizer in Dolby and try max things out as much as possible with it still sounding great.
Open JamesDSP, go to Speaker, set limiter threshold to -5, go to post gain and set it to -10. Turn on the master switch. Leave everything else unless you want to change any Bluetooth or headphone settings. Hide the persistent JamesDSP notification.
Reboot.
Install Audio Compatibility module with all the recommended settings.
Reboot.
Result, Dolby Atmos handles all the audio, increases the volume, applies optimizations system wide. However because volume steps are tricky to change on this phone we are stuck with the phone speaker volume being too loud even on the lowest setting. JamesDSP lowers the volume to the built-in speakers but we still get the Atmos experience we want. Everything else I assume you want to be louder anyway, like Bluetooth and headphones.
Audio Modification Library makes James and Dolby work together.
Audio Compatibility Patch fixes some issues with certain apps not using the sound mods.
Success! You get Dolby Atmos everywhere, but it doesn't max out the phone speaker volume, but it will still max out everything else. Oh and you can also change whatever other settings you want in JamesDSP.