Helo every one
i am on ics xperia neo v with locked bootloaders but rooted ,i can enter the cwm mode through cwm application but not able to enter through volume key can anyone help?
While your phone is booting.. When you see the 'SONY' logo, repeatedly press the 'volume down' button till you enter the CWM!
Press 'THANKS' if I helped you!
Have a good day!
Related
hii
i have download this kernel: http://forum.xda-developers.com/showthread.php?t=1440161
but how can i start the CWM recovery?
Volume down at start dosen´t work
Start your phone (it will vibrate)
Press then release the power button (repeat until you see the logo gets brighter)
The first line in the menu is reboot, if you keep on pressing power button(see controls) your phone will reboot.
To navigate (Controls):
Move Up = Volume Up
Move Down = Volume Down, Menu
Back = Back
Enter/Accept = Power Button, Home key
I have installed the older version, then this new version. Now I have two recovery. I can use the volume down method and power button method. I prefer volume down to enter recovery (older version, I like the controls better)
Hello the power button methode dont work on this kernel :-/
i have now installed the cwm installer from market there work the volume dowm methode
Red-Killer said:
hii
i have download this kernel: http://forum.xda-developers.com/showthread.php?t=1440161
but how can i start the CWM recovery?
Volume down at start dosen´t work
Click to expand...
Click to collapse
first, make sure u unlocked bootloader and based on .62 FW
Red-Killer said:
Hello the power button methode dont work on this kernel :-/
i have now installed the cwm installer from market there work the volume dowm methode
Click to expand...
Click to collapse
I don't understand why would it not work with power button with your phone (working with mine). To enter cwm that was included on this kernel you need to use power button. The original poster even wrote:
bbooff said:
To enter CWM press the power on-off key once or twice as soon as the text se logo gets brighter.
Click to expand...
Click to collapse
to enter CWM on mini pro just press the volume down button as soon as the text se logo gets brighter.
StereO_ said:
to enter CWM on mini pro just press the volume down button as soon as the text se logo gets brighter.
Click to expand...
Click to collapse
Have you tried this kernel? Because I can enter cwm using power button method clearly describe by the op/creator of the kernel.
Hey everyone,
How do I reboot my Xperia U in recovery mode?
Someone says, I have to press the Vol+ button repeadly while booting, another one says the Vol- button and powerup button, but nothing worked.
I used boot in recovery in the ROM manager, but my phone booted normally.
regards
MasterBolle
The way is vol +
If this doesnt work for you try tapping the screen on Sony Logo.
mirost1 said:
The way is vol +
If this doesnt work for you try tapping the screen on Sony Logo.
Click to expand...
Click to collapse
Both doesn't work
There is no recovery-mode
I sended a request to the SonyMobile-Support.
They say I can't start a Xperia U in recovery-mode.
MasterBolle said:
Hey everyone,
How do I reboot my Xperia U in recovery mode?
Someone says, I have to press the Vol+ button repeadly while booting, another one says the Vol- button and powerup button, but nothing worked.
I used boot in recovery in the ROM manager, but my phone booted normally.
regards
MasterBolle
Click to expand...
Click to collapse
Install a recovery first
Try cwm recovery
Hi,
I rooted and unlocked bootloader of my Sony Xperia Mini Pro (Andoid 4.0.4). Now how can I stat this into recovery mode.
I tried by pressing Power+Volume UP +Home button but it can't work.
Please advice me.
How to get into Recovery Mode
Shut down the phone.
Power on the phone
Pulse the 'VOLUME DOWN' button while booting
Hit the thanks button if it helped.
I have a stock Jelly Bean 4.1.2 installed on my xperia P handset. I wanted to install the custom rom CM 11 on my xperia. So I first rooted my handset using Doomlord Easy rooting toolkit. Then I copy pasted the custom Roms zip file in the internal storage. Then in order to install the custom rom I need to boot into the recovery mode of xperia P.
So I first tried using Quick Boot but it goes on rebooting to the regular jelly bean OS and doesn't enter the recovery mode.
Could anyone guide me which step I actually missed for installing the custom rom. If a perfect guide is provided I would be very grateful.
press power button + vol up button for 5 seconds... it will vibrate 1 time.. it will reboot.now keep pressing vol down key or power button ((because in some kernel key is different.)) key until it displays a menu in blue fonts.it's clockworkmod recovery.:good:
dev neo said:
press power button + vol up button for 5 seconds... it will vibrate 1 time.. it will reboot.now keep pressing vol down key or power button ((because in some kernel key is different.)) key until it displays a menu in blue fonts.it's clockworkmod recovery.:good:
Click to expand...
Click to collapse
I tried doing the steps as guided by you. On pressing the volume up key and the power button it vibrates 1 time then I kept on pressing the power button. So then the phone booted in safe mode again and again and then when I stopped pressing the power button the phone booted normally again in Jelly Bean. Is there any problem with unlocking the bootloader. I have received a key for unlocking the bootloader on my GMail account when I requested it on the sony's website.
did u tried with volume down key to enter recovery..? u said that u wanna install cyanogenmod ..so u need a custom kernel which can be found in same zip file of rom named 'boot.img'.& & a custom kernel needs unlocked bootloader. if u have to unlock your bootloader ..u have to search ..it's very easy and can be found on this forum,too(( if not pm me i'll send detailed steps.)).& yes,u are gonna need that key which you received to unlock bootloader .
u can always use ( fast boot ) to flash cm11
it`s better and best ......
any ways u could inter recovery mood by pressing volm+ 2 time`s after the phone vibration ....when sony log show...
its always work
If you installed CMW, to enter it I push about 10 or 15 times, while the phone is turning on, until it loads the cmw
Neesk said:
If you installed CMW, to enter it I push about 10 or 15 times, after first turning on vibration until it loads the cmw
Click to expand...
Click to collapse
If u wanna help at least write it the right way...
For CWM, turn on phone, when it first shows the Sony logo start pressing various times (Volume - ) key (don't push one time and keep the finger on the key!!) until it enters cwm recovery.
DannyDD said:
If u wanna help at least write it the right way...
For CWM, turn on phone, when it first shows the Sony logo start pressing various times (Volume - ) key (don't push one time and keep the finger on the key!!) until it enters cwm recovery.
Click to expand...
Click to collapse
For me it works only with Volume '+'
In CM11 zip, u have the boot.img... flash it using fastboot (doesn't work on Windows 8 or 8.1), then u'll have the CM11 kernel... turn on the phone and when it is starting, it'll vibrate when showing sony logo, just tap the power button when vibrates and will enter in CWM, then just follow the tutorial in CM11 topic.
so what's the right way to reboot in recovery mode? I've this kernel http://forum.xda-developers.com/xperia-u/p-development/rom-cyanogenmod-11-0-t2626639
wiking76 said:
so what's the right way to reboot in recovery mode? I've this kernel http://forum.xda-developers.com/xperia-u/p-development/rom-cyanogenmod-11-0-t2626639
Click to expand...
Click to collapse
I got same problem to reboot in CWM mode. Following all recommendations in this thread. Did not work.
However when coming back to one of the Xperia Phone instructions to reboot in CWM, I tried again to follow those instructions given by following links :
Sony Xperia P CyanogenMod 11 Project page Thread on xda-developers https://sites.google.com/site/androdevlinux/xperia-p/xperia-p-roms/cm11-download/
Here are extracts which I strictly followed :
First time flashing CyanogenMod 11.0 your device, or coming from another ROM? You need to be on Unlocked bootloader
Fastboot kernel(boot.img) from the rom zip
Press power button when Device vibrates at boot splash/logo to enter TWRP recovery
Format data and cache
Flash the Zip
Reboot
The "Press power button when Device vibrates at boot splash/logo to enter TWRP recovery" is really the trick to enter CWM mode ....
i installed a custom rom, but due to some reason it hasnt installed properly and not letting me access settings. and moreover i am not able to install CWM recovery as vol - button way is not wrking.
Wht shd I do?? please help
Hello
I'm using a Xperia Go Stock ROM 6.2.A.1.100 and can't enter recovery. Help
I have rooted with DooMLoRDs Easy rooting toolkit (v17.0) and installed CWM Touch recovery 1.1
But i cant enter the recovery. I have tried:
*Power and volume down button
*Reboot to recovery from Flashify app
*command "adb reboot recovery"
The phone just boots normally, not to recovery.
In my sola to enter to CWM I must on switched off phone long press power button to boot and after vibration clicking continuously volume down button until I see recovery.
Hibron said:
In my sola to enter to CWM I must on switched off phone long press power button to boot and after vibration clicking continuously volume down button until I see recovery.
Click to expand...
Click to collapse
It worked. :good: thank you!