Related
Hi Guys,
I rooted my SGS3 and installed LCD Density Modder to change the LCD density. I selected density value as 220 and rebooted my phone. The phone went into a bootloop after which I did a factory reset. The phone could reboot into android but it always shown me an error that touchwiz has stopped. So I went into recovery mode and cleared - data, system, cache . To my horror, now the phone is not booting. It only shows the white samsung logo.I have tried doinf a factory reset but it does not help.
I can enter the download mode. Please suggest what should I do ?
Thanks!!
flash your stock rom with odin :good:
If you can go to a download mode just flash another rom via odin.i think that should help.
Sent from my GT-I9300 using Tapatalk 2
Your not bricked, just reflash the stock rom via odin
Sent from my SGH-T989 using xda premium
You removed your ROM. It has nothing to load. Pick a ROM, download and save it to your SD Card, then flash it via your custom recovery (or flash with ODIN if you don't have a custom recovery).
P.S. If it makes you feel any better, I did this the first time I rooted my T-Mobile myTouch way back when. It's a noob mistake, but fixable. Don't worry, that's why you've got us!
Chaos Residue said:
You removed your ROM. It has nothing to load. Pick a ROM, download and save it to your SD Card, then flash it via your custom recovery (or flash with ODIN if you don't have a custom recovery).
P.S. If it makes you feel any better, I did this the first time I rooted my T-Mobile myTouch way back when. It's a noob mistake, but fixable. Don't worry, that's why you've got us!
Click to expand...
Click to collapse
Thanks for the quick reply guys!
I have been flashing a lot on my previous I9000 . So I was very confident that I could handle this.
Can you please tell me how do i put a CWM flashable ROM on the internal SD card unless my phone is booted in android ? Because all the custom roms I find here are CWM flashable and not ODIN flashable.. I remeber way back Darky had cooked a base ROM for I9000 which was ODIN flashable. Do you have any idea about such a rom?
Also, the stock rom is a huge file and the server at androidfirmwares.net does not support resuming I have a poor bandwidth these days.. Can you direct me to a resumable link or a torrent link for the Stock 4.0.4 ICS for INDIA.
Will be a great help !!
getmanan said:
Thanks for the quick reply guys!
I have been flashing a lot on my previous I9000 . So I was very confident that I could handle this.
Can you please tell me how do i put a CWM flashable ROM on the internal SD card unless my phone is booted in android ? Because all the custom roms I find here are CWM flashable and not ODIN flashable.. I remeber way back Darky had cooked a base ROM for I9000 which was ODIN flashable. Do you have any idea about such a rom?
Also, the stock rom is a huge file and the server at androidfirmwares.net does not support resuming I have a poor bandwidth these days.. Can you direct me to a resumable link or a torrent link for the Stock 4.0.4 ICS for INDIA.
Will be a great help !!
Click to expand...
Click to collapse
Look in the stickies or go to sammobile there are Odin ones you're just not looking hard enough.
Sent from my GT-I9300 using xda app-developers app
getmanan said:
Thanks for the quick reply guys!
I have been flashing a lot on my previous I9000 . So I was very confident that I could handle this.
Can you please tell me how do i put a CWM flashable ROM on the internal SD card unless my phone is booted in android ? Because all the custom roms I find here are CWM flashable and not ODIN flashable.. I remeber way back Darky had cooked a base ROM for I9000 which was ODIN flashable. Do you have any idea about such a rom?
Also, the stock rom is a huge file and the server at androidfirmwares.net does not support resuming I have a poor bandwidth these days.. Can you direct me to a resumable link or a torrent link for the Stock 4.0.4 ICS for INDIA.
Will be a great help !!
Click to expand...
Click to collapse
Sad to say you're gonna need to use your computer brosef. Get a microSD card reader for your computer, download the ROM zip to it, then go into your CWM recovery and flash it. If you don't have a computer or a card reader you'll need to put your SIM and SD Card in another phone and download it that way, then put the SIM and SD Card back in your S3.
Go to sammobile dowbload stock rom and flash via odin.then root and then do what you wantits simple this way
Sent from my GT-I9300 using Tapatalk 2
Or you could just go here to download both Odin and a stock ROM for the S3 and flash them from your computer
Much easier than the method mentioned above! Not even sure what he's on about...
[EDIT] Beaten to it. Heh. Above the above
Chaos Residue said:
You removed your ROM. It has nothing to load. Pick a ROM, download and save it to your SD Card, then flash it via your custom recovery (or flash with ODIN if you don't have a custom recovery).
P.S. If it makes you feel any better, I did this the first time I rooted my T-Mobile myTouch way back when. It's a noob mistake, but fixable. Don't worry, that's why you've got us!
Click to expand...
Click to collapse
BJ van Beethoven said:
Or you could just go here to download both Odin and a stock ROM for the S3 and flash them from your computer
Much easier than the method mentioned above! Not even sure what he's on about...
[EDIT] Beaten to it. Heh. Above the above
Click to expand...
Click to collapse
Thanks....
But do you know of a torrent link for stock firmware?
or a resumable download link...?
Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
dixielee said:
Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
Click to expand...
Click to collapse
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Hello,
You could try downloading the rom required and install using odin.
You will need to make sure you get the right version for your phone and use odin to flash.
I've not done exactly what you have before I got into a simple boot loop and had to re flash. Live and learn I guess!
http://forum.xda-developers.com/showthread.php?t=1457458
Sent from my GT-I9100 using Tapatalk 2
Thin_Bezel said:
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply,
But how do I connect my phone to Odin and what menu should the phone be in, in the recovery mode?
Doesn't the phone have to be in the download mode?
I can only seem to get into the basic recovery mode, ie volume up + power + home keys.
Regards..............dixie.
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
killall said:
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
Click to expand...
Click to collapse
O'k I did as you told me, but the first strange thing is, when I extract the zip file I get the following: boot.bin, cache, factory fs, hidden, modem.bin, param.lfs, Sbl.bin and zImage.............there is no exe type file!!!
However if I open odin, click on PDA and enter the whole zip file location and press start, everything goes ahead as planned.
I get a "Pass" and the phone restarts, I get the small tune and the blue moving lights on the screen, but then it just jams up, on the S Samsung Galaxy S2 screen. That's as far as the boot sequence goes.......frozen on the Galaxy S2 Screen!!
Any suggestions?
Regards......................dixie.
Pull out the battery, wait a few seconds replace and try to boot again. If that doesn't work, check you have the correct firmware to flash and try again with Odin.
Or have a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1457458
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
TheATHEiST said:
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
Click to expand...
Click to collapse
O'k thank you for your reply and thank you to the others that replied.
I was using an incorrect rom to flash and an incomplete rom at that!
I downloaded a different rom, extracted the files and flashed with odin. Now I am up and running and have the phone back to full woking order.
That was pretty scarery stuff and I thought I had bricked the phone for ever, I guess a little knowledge is helpful but dangerous, if one isn't sure of what they are doing.
Thank you once again for your help, it was much appreciated. I'll contact you again no doubt, next time I create a stuff up.
Regards.................dixie.
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Ignore the above post guys, a little more reading and I found my mistake.
However, I am still interested in the suggestion of a Custom Rom, which would work successfully, on Australian Networks.
Cheers to All......dixie.
dixielee said:
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Click to expand...
Click to collapse
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
AnubuRe said:
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
Click to expand...
Click to collapse
Yes thanks for the reply. I discovered that I didn't have to extract the root file, as it was already a .tar (stupid me).
So now I have a rooted phone and the Official ICS version XXLPQ, which is working in Australia, but I have noticed, that most of the time the Network is showing "edge".
All I really have to find now, is a good, stable, custom rom, that will also work in Australia.
A couple of observations....
You don't need "a good stable custom rom that will also work in Australia". Region has nothing to do with how a rom performs/your experience with that rom. If you're having issues with connectivity/you're not happy with data speeds, flashing/trying other modems may help. I suggest you read through this thread, at various times people have discussed which modems have worked well with different carriers (particular modems seem to work well for most people using a particular carrier). You can then search for CWM flashable versions of these modems & test them out until you find one that gives you connectivity you're happy with.
The other observation is you're a bit lacking in the 'basics'. I highly recommend you take the time to read through the guides. Knowing the basics makes it less likely you'll bork your phone at some stage, and that you'll be able to solve any problems that come up in a methodical/logical way (as opposed to guessing).
........a bit!!!!!!
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
O'k thanks guys.:good:
Thin_Bezel said:
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Use Siyah kernel v6 beta4 instead.
Hi, i'm really new here, but here is my issue:
So I love my Galaxy Note II. It's fantastic. The only issue is now.. i can't use it.
My phone model is sch-i605 (verizon)
The Story: (in as much detail as i can remember)
1. Ran out of internal Memory
2. Bought a 64 GB sandisk Microsd.
3. Found out i had to root my phone in order to switch the internal & external sd's. O.K.
4. Rooted via Odin3 v1.85 (old i know) but O.K.
5. Messed around a little with Titanium Backup (which i didnt know how to work) as well as a File Manager (which i also didnt know how to work)
6. Downloaded triangle away
7. Dragged and dropped all of the files in "Phone" from my pc into the microsd.
8. tried to boot from microsd using app2sd, didnt work. tried multiple times. No go.
9. decided it would be better to factory restore it all, even if it meant losing data. So that i could do this like the vids. (i didnt really care so long as i get my 64 gb of memory)
10. Do a little reading, and then decide to use triangle away to get rid of any tick marks...
11. Right after pressing the "OK" to reset the ticks, My phone locks me out saying: "System software not authorized by Verizon Wireless has been found on your phone"
12. Tried to find the right "stock" file to try to flash via odin to totally restore my phone (doesnt matter if it gets rid of the triangle tick or not, i just wanna be able to use my phone)
13. Been at this all day and it's not only annoying but beginning to freak me out.
14. Can anyone help me?
15. My worries: I cannot get it back to working order & I was hoping to be able to restore it to Warranty covering condition, guess not?
I have tried A LOT of different things, but this is just insane and really wants me to die.
HEEEEELLLPP
Take out your sd card and put the phone into download mode (volume down + home + power) I assume you already did this.
Download the stock Rom and Odin (I use 3.07). Stick the Rom in the pda area and flash. This should take about 10 minutes.
If you have already done this make sure that the stock Rom file is good (there were a couple of bad ones that didn't flash to stock). Otherwise there may be something up with u r internal memory.
If you have twrp already you can load any custom rom onto your external sdcard and install from your external card.
Hope that helps.
Sent from my SCH-I605 using Tapatalk 2
hexdrus said:
Take out your sd card and put the phone into download mode (volume down + home + power) I assume you already did this.
Download the stock Rom and Odin (I use 3.07). Stick the Rom in the pda area and flash. This should take about 10 minutes.
If you have already done this make sure that the stock Rom file is good (there were a couple of bad ones that didn't flash to stock). Otherwise there may be something up with u r internal memory.
If you have twrp already you can load any custom rom onto your external sdcard and install from your external card.
Hope that helps.
Click to expand...
Click to collapse
Well, i've done all of this, but i think i've yet to find a proper stock rom for my phone. I've used samsung-updates.com but that one didnt work at all. If this is the case, i was wondering if someone can point me to a proper stock rom for my phone. (Verizon Galazy Note II)
Also, i do not have twrp.
Sent from my SCH-I605 using Tapatalk 2
Changbang said:
Well, i've done all of this, but i think i've yet to find a proper stock rom for my phone. I've used samsung-updates.com but that one didnt work at all. If this is the case, i was wondering if someone can point me to a proper stock rom for my phone. (Verizon Galazy Note II)
Also, i do not have twrp.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Try this thread ---> http://forum.xda-developers.com/showthread.php?t=2024207
*Update*
So i tried another Rom this morning. It didnt work. But now my phone is beginning to say that
"Firm upgrade encountered an issue. Please select recovery mode in kies and try again."
Doing some research on that now. But idk... if i get a fix i'll let you know.
jcollier said:
Try this thread ---> http://forum.xda-developers.com/showthread.php?t=2024207
Click to expand...
Click to collapse
Also i realized i didnt unlock the bootloader... so that might've been my issue?
Hrmm, sorry but i've already tried all the mirrors of the stock rom that 'imnuts' kindly put out. i'll give it another shot with Odin v3.07.
Changbang said:
Also i realized i didnt unlock the bootloader... so that might've been my issue?
Hrmm, sorry but i've already tried all the mirrors of the stock rom that 'imnuts' kindly put out. i'll give it another shot with Odin v3.07.
Click to expand...
Click to collapse
That is definitely your issue. You have to unlock to flash a custom recovery and then to flash custom roms.
If you are trying to get back to stock, have you looked here: http://forum.xda-developers.com/showthread.php?t=2040264
http://forum.xda-developers.com/show....php?t=2024207
this one did it for me guys!!! THANK YOU hahaha
i think it wasnt working for me because I wasnt using the alternate links on that page. haha thank you so much!
LATEST EDIT http://forum.xda-developers.com/showpost.php?p=55161735&postcount=17
EDIT 2: http://forum.xda-developers.com/showthread.php?p=55095194#post55095194
EDIT: I got it rooted now but i would like some help flashing a custom ROM onto it. like what i need to know about it and stuff and which ROMs work for galaxy player 5.0. I was looking at cyanogenmod 11 but and the beanstalk one, but the rear camera doesn't work right i heard. I would kindof like a kitkat rom but if i have to use jellybean then i guess i do. i would like to know which rom is recommended
hey you all i need a little help rooting my galaxy player 5.0. model YP-G70 firmware 2.3.5 kernel version [email protected] #2 build number GINGERBREAD.UEK18
i was gonna use the superoneclick program but it says "file download blocked." isn't shortfuse.org the site to get it from? or where do i get the program?
I had already installed Samsung Kies, but now i need the superoneclick program. I was trying to get version 2.3.3. so what i'm wondering is where and how do you get superoneclick???
I've done a lot of researching which way is the best to root it, and i think superoneclick looks best. please tell me different if i'm wrong ... so yeah... thanks in advance
Your right to try and use superoneclick as a rooting program. Try downloading the most updated version and scan on Norton for viruses. Then open the program, make sure you have USB debugging on and hit root. After that hit yes when you get prompted to test and unplug your device and reboot.
http://m.download.cnet.com/SuperOneClick/3000-2094_4-75447027.html
Here's a link to CNET to download. If diwnlias did not work try looking for it on xda
Sent from my YP-G70 using XDA Free mobile app
troy5890 said:
Your right to try and use superoneclick as a rooting program. Try downloading the most updated version and scan on Norton for viruses. Then open the program, make sure you have USB debugging on and hit root. After that hit yes when you get prompted to test and unplug your device and reboot.
Here's a link to CNET to download. If diwnlias did not work try looking for it on xda
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
thanks for answering!! i clicked on the link and hit download and it downloaded but it said that chrome blocked, cause it's malicious. (pic below) it shows up under my downloads though. i scanned it with vipre (i use that instead of norton) and it said it was trojan. should i just try to run it anyway or what...
edit: i tried opening it from my downloads and here's what it brings up. pic below
Antivirus saying the package is malicious is perfectly normal. The 2 root exploits used in SuperOneClick are already identified as Android-based trojans in all modern antivirus softwares. If you downloaded from a trusted site, DISABLE your antivirus software and start the rooting process. When you're done, don't forget to turn it back on.
Sent from Google Nexus 4 @ CM11
wow you're right!! I got it rooted!! so i think... i have the app superuser soo yeah... now i wanna flash a custom rom which i have to research or if you all would be kind enough to help me with. i didn't do any research on that yet so i really know nothing. just that i'm missing out on some good stuff i think
Austin68 said:
wow you're right!! I got it rooted!! so i think... i have the app superuser soo yeah... now i wanna flash a custom rom which i have to research or if you all would be kind enough to help me with. i didn't do any research on that yet so i really know nothing. just that i'm missing out on some good stuff i think [/QUOTE
Now that you are rooted it is time for some awesome custom ROMs. There is cm11 you could try by going into the development page and downloading it. But before you flash make sure you have a nandroid back up and you go in this order if you want to run cm11.
Gingerbread, ice cream sandwich, jelly bean, jelly bean 4.3, then cm11. Make sure your recovery is updated when flashing different rims or it might come out as a herring.
Also you could just go straight to KitKat. If you want.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
troy5890 said:
Austin68 said:
wow you're right!! I got it rooted!! so i think... i have the app superuser soo yeah... now i wanna flash a custom rom which i have to research or if you all would be kind enough to help me with. i didn't do any research on that yet so i really know nothing. just that i'm missing out on some good stuff i think [/QUOTE
Now that you are rooted it is time for some awesome custom ROMs. There is cm11 you could try by going into the development page and downloading it. But before you flash make sure you have a nandroid back up and you go in this order if you want to run cm11.
Gingerbread, ice cream sandwich, jelly bean, jelly bean 4.3, then cm11. Make sure your recovery is updated when flashing different rims or it might come out as a herring.
Also you could just go straight to KitKat. If you want.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
I think he doesn't even have a custom recovery yet and need some guide on that. Unfortunately I couldn't help because I have a Player 4.0 instead of 5.0.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
no i don't have a custom recovery or a nandroid backup. not sure how to make them either, but i'll do some checkin' around. also idk which rom to choose. I'm kinda hoping to get 4.4 kitkat if i can, but i'm only on 2.3.5 now soo... i hope i can. i was thinkin' about cygenmod but i've heard that the camera doesn't always work then. and i'm not exactly sure how to get it. If you wanna help me out I'd really appreciate it
The camera works
Sent from my YP-G70 using XDA Free mobile app
I was reading some tutorials for installing CWM recovery. a lot of them say that you would have to flash a kernel with it built into it. and another one says to use rom manager app which I have but the app doesn't support a galaxy player 5.0. so i wanna install it but I don't know how. like there are so many tutorials. flashing a kernel is risky I heard. not sure how i should start
Austin68 said:
I was reading some tutorials for installing CWM recovery. a lot of them say that you would have to flash a kernel with it built into it. and another one says to use rom manager app which I have but the app doesn't support a galaxy player 5.0. so i wanna install it but I don't know how. like there are so many tutorials. flashing a kernel is risky I heard. not sure how i should start
Click to expand...
Click to collapse
Go for the kernel route. Find a CWM'd kernel that supports your current version of stock ROM and flash that. ROM Manager performs badly even on supported devices so don't even think about it.
And... The risk of flashing a kernel/ROM is something you eventually have to get over if you want your device better
Sent from Google Nexus 4 @ CM11
AndyYan said:
Go for the kernel route. Find a CWM'd kernel that supports your current version of stock ROM and flash that. ROM Manager performs badly even on supported devices so don't even think about it.
And... The risk of flashing a kernel/ROM is something you eventually have to get over if you want your device better
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
ok thanks!! I'll start lookin' for the right kernel if you have any recommendations just let me know =D
ok I downloaded a kernel (didn't flash it yet). I downloaded this kernel > http://forum.xda-developers.com/showthread.php?t=2318550 and i'm gonna download odin to flash it with but i don't think it's a .tar file so will odin work???? also i guess i'll just download the latest version of odin...?? it said that some versions aren't compatible with some devices.
EDIT it's a .zip file. i think you need cwm to flash it. please tell me if i'm wrong. but i don't have cwm. so i think i might have to choose another kernel ??
also will flashing that kernel erase my third-party apps or app data??
and when i get this kernel on, will I be able to run cm11 on here or will i have to get a different kernel to run on that??
also i think this vid might be a good one. but he never says that he does a nandroid backup or anything
https://www.youtube.com/watch?v=mlyTZZVOvag
Austin68 said:
ok I downloaded a kernel (didn't flash it yet). I downloaded this kernel > http://forum.xda-developers.com/showthread.php?t=2318550 and i'm gonna download odin to flash it with but i don't think it's a .tar file so will odin work???? also i guess i'll just download the latest version of odin...?? it said that some versions aren't compatible with some devices.
EDIT it's a .zip file. i think you need cwm to flash it. please tell me if i'm wrong. but i don't have cwm. so i think i might have to choose another kernel ??
also will flashing that kernel erase my third-party apps or app data??
and when i get this kernel on, will I be able to run cm11 on here or will i have to get a different kernel to run on that??
also i think this vid might be a good one. but he never says that he does a nandroid backup or anything
https://www.youtube.com/watch?v=mlyTZZVOvag
Click to expand...
Click to collapse
Yeah this kernel is CWM only, so no go. As far as Odin compatibility goes, no, the latest version won't always work with anything. Use Odin 1.8x if you can (mine is 1.85 for my Player 4.0 and Captivate, should be the same for Galaxy S-family devices).
Kernels don't wipe any of your data, though flashing a wrong kernel which causes bootloop may do.
After flashing the corresponding kernel, get into CWM recovery and start flashing CM or the ROM you want as per the instructions given in the ROM's post. All AOSP-based ROMs run different (and incompatible) kernels than stock so don't worry about kernels once you're in.
Sent from Google Nexus 4 @ CM11
AndyYan said:
Yeah this kernel is CWM only, so no go. As far as Odin compatibility goes, no, the latest version won't always work with anything. Use Odin 1.8x if you can (mine is 1.85 for my Player 4.0 and Captivate, should be the same for Galaxy S-family devices).
Kernels don't wipe any of your data, though flashing a wrong kernel which causes bootloop may do.
After flashing the corresponding kernel, get into CWM recovery and start flashing CM or the ROM you want as per the instructions given in the ROM's post. All AOSP-based ROMs run different (and incompatible) kernels than stock so don't worry about kernels once you're in.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
so what kernel should i get? it has to be a Gingerbread one right? since i'm still on stock gingerbread rom. should I use Entropy's Daily Driver? that would be the only other one, right?
and once i get a jellybean or a kk rom wouldn't it be a good idea to get a better kernel?? like one made for a kk or jb? would it be faster? but then i would have to switch kernels if i would for any reason want to go back to stock gb rom??
Austin68 said:
so what kernel should i get? it has to be a Gingerbread one right? since i'm still on stock gingerbread rom. should I use Entropy's Daily Driver? that would be the only other one, right?
and once i get a jellybean or a kk rom wouldn't it be a good idea to get a better kernel?? like one made for a kk or jb? would it be faster? but then i would have to switch kernels if i would for any reason want to go back to stock gb rom??
Click to expand...
Click to collapse
I have a Player 4.0 instead of a 5.0 so unfortunately can't help you with finding the right kernel. Yes it's best for stock Gingerbread, but if you find Froyo ones, they can also be used. Do note that you can't boot into Gingerbread with a Froyo kernel, so use its CWM to flash whatever you want immediately afterwards.
I don't know of any JB/KK custom kernels, and since Player's single core CPU has its limitations, a custom kernel won't make it much better. At least on my IncS, even overclocking to 1.6GHz won't help with KK eating up my resources.
GB, JB, KK - kernels for different versions of Android are usually not cross-compatible, so you *must* switch kernel if you want to fall back to GB.
Sent from Google Nexus 4 @ CM11
AndyYan said:
I have a Player 4.0 instead of a 5.0 so unfortunately can't help you with finding the right kernel. Yes it's best for stock Gingerbread, but if you find Froyo ones, they can also be used. Do note that you can't boot into Gingerbread with a Froyo kernel, so use its CWM to flash whatever you want immediately afterwards.
I don't know of any JB/KK custom kernels, and since Player's single core CPU has its limitations, a custom kernel won't make it much better. At least on my IncS, even overclocking to 1.6GHz won't help with KK eating up my resources.
GB, JB, KK - kernels for different versions of Android are usually not cross-compatible, so you *must* switch kernel if you want to fall back to GB.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
thank you very much for your help. i was able to flash a custom kernel and get cwm. thanks you helped a lot
now i got the rom i was gonna flash downloaded it and extracted it. and i shouldn't have extracted it. then i was trying to flash it and i discovered i messed up. so i pulled the sd card out (which i had a complete nandroid backup on.) [the real mistake] and decided to start over. like, put the zipped files on the sd card. so i put the zips (unextracted) onto my micro sd but it can't mount the sd. so i think i'm like screwed. please help me
oh and when i boot all i see is the samsung logo, then it goes straight to cwm recorvery. I can also get into download mode. so I can get into cwm but my recovery is on my micro sd and it can't mount it. (i did a nandroid backup but it doesn't benefit me now. i also have to backup on my pc, but my pc doesn't wanna recognize it) did i brick it??
what i did...went into cwm wipe data/factory reset and wiped it. next > mounts and storage and clicked format system, and formatted it. then last i wiped dalvik cache. then i went to flash the rom (CM9) and it didn't flash. (because i had extracted it on the pc. it no longer was a .zip) don't know what i was thinkin' but yeah...
as of now i'm gonna start looking for threads to fix it.
i don't think samsung kies is working right either. :/ http://i.imgur.com/WV0iBPk.jpg
please help me unbrick it or whatever i need to do. only made one small mistake and now all this... :'( if you know anything about how to fix it pls reply. i need all the help i can get. thanks ...
Austin68 said:
thank you very much for your help. i was able to flash a custom kernel and get cwm. thanks you helped a lot
now i got the rom i was gonna flash downloaded it and extracted it. and i shouldn't have extracted it. then i was trying to flash it and i discovered i messed up. so i pulled the sd card out (which i had a complete nandroid backup on.) [the real mistake] and decided to start over. like, put the zipped files on the sd card. so i put the zips (unextracted) onto my micro sd but it can't mount the sd. so i think i'm like screwed. please help me
oh and when i boot all i see is the samsung logo, then it goes straight to cwm recorvery. I can also get into download mode. so I can get into cwm but my recovery is on my micro sd and it can't mount it. (i did a nandroid backup but it doesn't benefit me now. i also have to backup on my pc, but my pc doesn't wanna recognize it) did i brick it??
what i did...went into cwm wipe data/factory reset and wiped it. next > mounts and storage and clicked format system, and formatted it. then last i wiped dalvik cache. then i went to flash the rom (CM9) and it didn't flash. (because i had extracted it on the pc. it no longer was a .zip) don't know what i was thinkin' but yeah...
as of now i'm gonna start looking for threads to fix it.
i don't think samsung kies is working right either. :/ http://i.imgur.com/WV0iBPk.jpg
please help me unbrick it or whatever i need to do. only made one small mistake and now all this... :'( if you know anything about how to fix it pls reply. i need all the help i can get. thanks ...
Click to expand...
Click to collapse
Easy, bro. Does your current CWM recovery have a "sideload" option? Look for that either in the main menu or in the "install zip from sdcard" section. If you have that, then you could try sideloading a ROM directly from your PC to your device and it will flash automatically. For more instructions, just Google "ADB sideload".
If that doesn't cut it... Grab Odin and a stock GB firmware (these should be floating around in Dev section), flash that by Odin, and your Player gets returned to GB stock condition, where you can start over.
Sent from Google Nexus 4 @ CM11
AndyYan said:
Easy, bro. Does your current CWM recovery have a "sideload" option? Look for that either in the main menu or in the "install zip from sdcard" section. If you have that, then you could try sideloading a ROM directly from your PC to your device and it will flash automatically. For more instructions, just Google "ADB sideload".
If that doesn't cut it... Grab Odin and a stock GB firmware (these should be floating around in Dev section), flash that by Odin, and your Player gets returned to GB stock condition, where you can start over.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
no it doesn't have a sideload option anywhere. i have odin. and for the firmware, doesn't it have to be in the .tar form for odin to flash it?? i'll check that out. btw thanks !!
but the computer doesn't wanna recognize my device. so how can i flash anything??
EDIT do you think i could flash my nandroid backup through odin?? it has .tar files and one .md5 file, but 2 that aren't. i'll post a screen shot. but if i flash each of the .tar files and the .md5 file via odin do you think it would work? that file is only a .md5 though and not a .tar.md5 so idk
Austin68 said:
no it doesn't have a sideload option anywhere. i have odin. and for the firmware, doesn't it have to be in the .tar form for odin to flash it?? i'll check that out. btw thanks !!
but the computer doesn't wanna recognize my device. so how can i flash anything??
EDIT do you think i could flash my nandroid backup through odin?? it has .tar files and one .md5 file, but 2 that aren't. i'll post a screen shot. but if i flash each of the .tar files and the .md5 file via odin do you think it would work? that file is only a .md5 though and not a .tar.md5 so idk
Click to expand...
Click to collapse
No, nandroid backups won't be recognized by Odin. Just try finding a stock firmware out there. If you want your data back from your nandroid backup, you can always restore everything to normal first, then restore that nandroid and do whatever you please.
Sent from Google Nexus 4 @ CM11
Okay so ill be honest im super new to all this. I did some research on youtube. I used twrp and a app that is like goolauncher. I did not back up my OS and i accidently deleted it. Im trying to upgrade to the hellfire rom. When i did i get this error in the recovery menu
slow302stang said:
Okay so ill be honest im super new to all this. I did some research on youtube. I used twrp and a app that is like goolauncher. I did not back up my OS and i accidently deleted it. Im trying to upgrade to the hellfire rom. When i did i get this error in the recovery menu
Click to expand...
Click to collapse
You attempted to flash a ROM made for a different phone (d2att), never do that again unless you want a brick.
ArkThompson said:
You attempted to flash a ROM made for a different phone (d2att), never do that again unless you want a brick.
Click to expand...
Click to collapse
my phone is atat did i accidently post this in the wrong section?
slow302stang said:
my phone is atat did i accidently post this in the wrong section?
Click to expand...
Click to collapse
Yea, look at the sticky. Anyway, it is probably something to do with your recovery. Try flashing it using cwm.
lotimaoand
ArkThompson said:
Yea, look at the sticky. Anyway, it is probably something to do with your recovery. Try flashing it using cwm.
Click to expand...
Click to collapse
is that possible with out a os? the recovery deleted the OS so i cant even get onto my phone. I can only get to recovery and get to the odin downloaded thing
slow302stang said:
is that possible with out a os? the recovery deleted the OS so i cant even get onto my phone. I can only get to recovery and get to the odin downloaded thing
Click to expand...
Click to collapse
Yea, you can flash .zip versions of cwm through the recovery menu. You could also flash it through Odin if you can't find a flashable .zip of it, probably easier that way. Don't just flash any .zip of cwm you find through twrp, it has to be one made to be flashed.
ArkThompson said:
Yea, you can flash .zip versions of cwm through the recovery menu. You could also flash it through Odin if you can't find a flashable .zip of it, probably easier that way. Don't just flash any .zip of cwm you find through twrp, it has to be one made to be flashed.
Click to expand...
Click to collapse
i have no idea what that means. Anyway you could talk me througg it? I tryed to download odin but couldnt find a link that worked.
slow302stang said:
i have no idea what that means. Anyway you could talk me througg it? I tryed to download odin but couldnt find a link that worked.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2552640
You should just be able to download the recovery in this topic (.zip not tar.md5) and install it using twrp. Put the file on your external SD since you can't access your phone.
ArkThompson said:
http://forum.xda-developers.com/showthread.php?t=2552640
You should just be able to download the recovery in this topic (.zip not tar.md5) and install it using twrp. Put the file on your external SD since you can't access your phone.
Click to expand...
Click to collapse
I'm a bit confused. Do i just download that recovery? or is their something i have to download I got odin now.
2
okay so i did some youtube searching and alot of videos came up with odin. To download a stock rom . i downloaded a few and tryed to do it with odin and it always failed. ANyone have any ideas? or maybe theirs a way to just fix the hellfire rom?
i managed to figure out the phillz. all it did was change the recovery program to his and now its stock andriod recovery... . their has to be a way for me to odin the stock os system. I wish i could just get into the phone itd be so much easier. lol 50k people online someone help me!
slow302stang said:
i managed to figure out the phillz. all it did was change the recovery program to his and now its stock andriod recovery... . their has to be a way for me to odin the stock os system. I wish i could just get into the phone itd be so much easier. lol 50k people online someone help me!
Click to expand...
Click to collapse
You know that the file that you have to put in odin has to be a ridiculous amount of mb or gb then other things because i made that mistake 2 lol.
You have to extract it when using your pc and stuff and sometimes you get others files like ones that arent even like 100 mb or whatever that can look like a rom.
Give me a full list of evrything you exactly do when flashing and wich file and name and how big the file is and also your model number... The s3 ATT right?
Can someone verify for me that att has an own bootloader and stuff and you can only like odin flash their stock roms right?
You can always use phillz touch recovery and download a custom rom like cyanogenmod for your phone! Then you can acces it... If you dont brick your phone.
Sent from my GT-I9205 using XDA Free mobile app
slow302stang said:
i managed to figure out the phillz. all it did was change the recovery program to his and now its stock andriod recovery... . their has to be a way for me to odin the stock os system. I wish i could just get into the phone itd be so much easier. lol 50k people online someone help me!
Click to expand...
Click to collapse
Huh? What exactly did you do? If you flashed Philz correctly using TWRP then you should have his recovery on your phone.
I think he needs to report his post to get it moved to his section with people to help him with his exact model and the correct stickies to help him.
If he can't then someone may need to report it for him.
Either way here is some reading material I found after a quick search in your forum.
http://forum.xda-developers.com/showthread.php?t=1725839
Always make sure of what your are flashing, that its correct for your phone and always back up
its the peanut said:
You know that the file that you have to put in odin has to be a ridiculous amount of mb or gb then other things because i made that mistake 2 lol.
You have to extract it when using your pc and stuff and sometimes you get others files like ones that arent even like 100 mb or whatever that can look like a rom.
Give me a full list of evrything you exactly do when flashing and wich file and name and how big the file is and also your model number... The s3 ATT right?
Can someone verify for me that att has an own bootloader and stuff and you can only like odin flash their stock roms right?
You can always use phillz touch recovery and download a custom rom like cyanogenmod for your phone! Then you can acces it... If you dont brick your phone.
Sent from my GT-I9205 using XDA Free mobile app
Click to expand...
Click to collapse
I have a galaxy s3 atat. The rom i wastrying to install was hellfire. Right now i managed to get phills recovery back on but i never backed up anyfiles so it doesnt help. That i know of. I just started this yesterday lol
slow302stang said:
I have a galaxy s3 atat. The rom i wastrying to install was hellfire. Right now i managed to get phills recovery back on but i never backed up anyfiles so it doesnt help. That i know of. I just started this yesterday lol
Click to expand...
Click to collapse
So you got Philz touch running? If so, then you should be able to flash hellfire with it (assuming that you definitely have the right rom for your phone model).
ArkThompson said:
So you got Philz touch running? If so, then you should be able to flash hellfire with it (assuming that you definitely havie the right rom for your phone model).
Click to expand...
Click to collapse
It doesnt work. I kept getting errors when i tryed installing it .
slow302stang said:
It doesnt work. I kept getting errors when i tryed installing it .
Click to expand...
Click to collapse
Try redownloading the rom maybe an bad download.
When it doesnt work then your phone just cant take it and try something else man.
And also ask the developer from the hellfire rom if your phone is compatible with the rom (sometimes you need to download some sort of kernel or whatever it needs)
Sent from my GT-I9205 using XDA Free mobile app
Is this the first ROM you've tried to flash? What were you running before trying to flash hellfire?
To fix your situation should be fairly simple. 1.download a different ROM to an external SD card, I recommend slimkat because its pretty stable. They use a unified d2lte build for all d2 devices. Before you install the zip, wipe data/factory reset, manually format system, wipe cache partition and dalvik cache, install the ROM zip and gapps zip if required then reboot and profit.
samsgun357 said:
Is this the first ROM you've tried to flash? What were you running before trying to flash hellfire?
To fix your situation should be fairly simple. 1.download a different ROM to an external SD card, I recommend slimkat because its pretty stable. They use a unified d2lte build for all d2 devices. Before you install the zip, wipe data/factory reset, manually format system, wipe cache partition and dalvik cache, install the ROM zip and gapps zip if required then reboot and profit.
Click to expand...
Click to collapse
I was running the stock rom. I downloaded cynogenor whatever its called but i cant put it on the sd card. It says the device is not connected. If i pull the files out of the sd card itll work. But it wont let me put the whole zip file on the sd card. Any ideas?