[Q][HELP] Bricked? - Optimus One, P500, V General
I was running the phone smoothly till yesterday night and then just thought of installing the lastest version of the CM9.0 (hephappy) I was running on bluepill. I then thought I had to update to TINYSTREAM for better performance. I went through a few forums and found out that it could be done without erasing the data or factory resetting. So i was just going through CWM 5.0.2.7 and by mistake i had pressed fix permission... And it started doing so. It took about ten min. ( I did not stop it as I had the fear of losing my phone). I then thought now I'm ready to Update my phone. I then downloaded all the required things(actually only the ROM). And then transferred it in to the memory card. I also had problems with recovery before. I could never directly boot into the recovery just by pressing the Vol Up + Power + Home, as mentioned in other threads. Thereby, I went in CWM and then rebooted through the option given there. And TADAAAAAA ... Phone got stuck in the LG logo.... This had already happened to me before so I did not panic cause i knew that i could recover my phone( I have gone through it once so had experience) I used the KDZ updater and the went to the emergency mode( That to my surprise worked) and started flashing the V20
And i got an error - The log read as:
Code:
12:43:04:379] : =============================================
[12:43:04:379] : Log is started on 08.07.2012, at 12:43:04:379,
executable: C:\Users\Kunal Gaurav\Desktop\kdz\KDZ_FW_UPD.exe (ProcID: 0x00001510),
compile time : Sep 8 2010 17:19:53
[12:43:04:379] : Version :
[12:43:04:382] : strFilename1 = V20
[12:43:04:383] : m_DlMode = 4, m_strBinaryPath = C:\ProgramData\LGMOBILEAX\Phone\DZ_GT540AT-00-V20c-IND-XX-DEC-03-2010.dz, m_nSelectedImages= 70787108
[12:43:42:053] : Start Web Downloading
[12:43:42:053] : Get Usb Port
[12:43:42:146] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM15)
[12:43:42:146] : Remove Standard Serial over Bluetooth link (COM15)
[12:43:42:146] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM17)
[12:43:42:146] : Remove Standard Serial over Bluetooth link (COM17)
[12:43:42:146] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM42)
[12:43:42:146] : Remove Standard Serial over Bluetooth link (COM42)
[12:43:42:146] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM44)
[12:43:42:146] : Remove Standard Serial over Bluetooth link (COM44)
[12:43:42:146] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM53)
[12:43:42:146] : Remove Standard Serial over Bluetooth link (COM53)
[12:43:42:146] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM41)
[12:43:42:146] : Remove Standard Serial over Bluetooth link (COM41)
[12:43:42:146] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM43)
[12:43:42:146] : Remove Standard Serial over Bluetooth link (COM43)
[12:43:42:146] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM14)
[12:43:42:146] : Remove Standard Serial over Bluetooth link (COM14)
[12:43:42:146] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM16)
[12:43:42:146] : Remove Standard Serial over Bluetooth link (COM16)
[12:43:42:146] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM51)
[12:43:42:146] : Remove Standard Serial over Bluetooth link (COM51)
[12:43:42:146] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM50)
[12:43:42:146] : Remove Standard Serial over Bluetooth link (COM50)
[12:43:42:146] : rsi.strFriendlyName=Standard Modem over Bluetooth link #2
[12:43:42:146] : Remove Standard Modem over Bluetooth link #2
[12:43:42:146] : rsi.strFriendlyName=Nokia 2700 classic Bluetooth Modem
[12:43:42:146] : Remove Nokia 2700 classic Bluetooth Modem
[12:43:42:146] : rsi.strFriendlyName=Nokia 5130 XpressMusic Bluetooth Modem
[12:43:42:147] : Remove Nokia 5130 XpressMusic Bluetooth Modem
[12:43:42:147] : rsi.strFriendlyName=Nokia N8-00 Bluetooth Modem
[12:43:42:147] : Remove Nokia N8-00 Bluetooth Modem
[12:43:42:147] : rsi.strFriendlyName=Nokia C2-01 Bluetooth Modem
[12:43:42:147] : Remove Nokia C2-01 Bluetooth Modem
[12:43:42:147] : rsi.strFriendlyName=Standard Modem over Bluetooth link
[12:43:42:147] : Remove Standard Modem over Bluetooth link
[12:43:42:147] : rsi.strFriendlyName=LGE Bluetooth TransPort (COM46)
[12:43:42:147] : Remove LGE Bluetooth TransPort (COM46)
[12:43:42:147] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM31)
[12:43:42:147] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[12:43:42:147] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM31
[12:43:42:147] : Port = COM31
[12:43:42:148] : Clear
[12:43:42:148] : Clear
[12:43:42:149] : UNKNOWN : Req(12) -> Rsp(13)
[12:43:42:149] : Clear
[12:43:42:150] : UNKNOWN : Req(12) -> Rsp(13)
[12:43:42:150] : Clear
[12:43:42:151] : UNKNOWN : Req(12) -> Rsp(13)
[12:43:42:151] : >> DIAG_STATUS_F FAILED
[12:43:42:156] : >>Get Model Name [DIAG_VERNO_F]
[12:43:42:156] : Clear
[12:43:42:157] : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:157] : Clear
[12:43:42:158] : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:158] : Clear
[12:43:42:159] : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:159] : Clear
[12:43:42:160] : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:160] : Clear
[12:43:42:161] : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:161] : Clear
[12:43:42:162] : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:162] : FAIL (No Phone)
[12:43:42:162] : GetModelName() Operation Failed Check Diag CMD
[12:43:42:162] : EMERGENCY Booting Mode
[12:43:42:162] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[12:43:42:162] : Clear
[12:43:42:162] : Clear
[12:43:42:163] : BS/P500/7Derial over Bluetooth link (CO
[12:43:42:163] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P500
[12:43:42:163] : >>Get Mobile SW [DIAG_EXT_BUILD_ID_F]
[12:43:42:163] : Clear
[12:43:42:163] : Clear
[12:43:42:164] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[12:43:42:164] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[12:43:42:164] : Clear
[12:43:42:165] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[12:43:42:165] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[12:43:42:165] : Clear
[12:43:42:166] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[12:43:42:166] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[12:43:42:166] : FAIL
[12:43:42:166] : Phone_Diag_Status = FALSE
[12:43:42:166] : Clear
[12:43:42:166] : Clear
[12:43:42:167] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[12:43:42:167] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[12:43:42:167] : Clear
[12:43:42:168] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[12:43:42:168] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[12:43:42:168] : Clear
[12:43:42:169] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[12:43:42:169] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[12:43:42:169] : NV Write Fail : NV ITEM 9028(9028)
[12:43:42:269] : m_pPhoneCtrl->m_pDload->Dl_GetCommMode(&m_pPhoneCtrl->m_pDload->m_nCommMode)
[12:43:42:269] : >> GET DLOAD COMM MODE
[12:43:42:269] : Clear
[12:43:42:269] : Clear
[12:43:42:270] : [GetCommMode] Communication mode : 2
[12:43:42:270] : Pre Nand Download
[12:43:42:270] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[12:43:42:270] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[12:43:42:270] : Clear
[12:43:42:270] : Clear
[12:43:42:271] : [COM31] >>NandFlashInitWithFile(PARTITION TBL), BinType =8
[12:43:42:271] : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = PARTITION TBL, BinType = 8
[12:43:42:271] : NandFlashInitWithFile ::
[12:43:42:271] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[12:43:42:271] : Clear
[12:43:42:271] : Clear
[12:43:42:282] : Clear
[12:43:42:282] : Clear
[12:43:42:283] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[12:43:42:283] : m_nSelectedImages= 70787108,Type= 3
[12:43:42:283] : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[12:43:42:283] : [COM31] >>NandFlashInitWithFile(AMSS MODEM HEADER), BinType =14
[12:43:42:283] : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = AMSS MODEM HEADER, BinType = 14
[12:43:42:283] : NandFlashInitWithFile ::
[12:43:42:285] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[12:43:42:285] : Clear
[12:43:42:286] : Clear
[12:43:42:297] : >> AMSS FLASHING ...
[12:43:42:301] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[12:43:42:301] : Sending Pkt Seq : 0
[12:43:42:301] : Clear
[12:43:42:302] : Sending Pkt Seq : 1
[12:43:42:302] : Sending Pkt Seq : 2
[12:43:42:302] : Sending Pkt Seq : 3
[12:43:42:302] : Sending Pkt Seq : 4
[12:43:42:302] : Sending Pkt Seq : 5
[12:43:42:302] : Sending Pkt Seq : 6
[12:43:42:302] : Sending Pkt Seq : 7
[12:43:42:303] : Sending Pkt Seq : 8
[12:43:42:303] : Sending Pkt Seq : 9
[12:43:42:303] : Sending Pkt Seq : 10
[12:43:42:303] : Sending Pkt Seq : 11
[12:43:42:303] : Sending Pkt Seq : 12
[12:43:42:303] : Sending Pkt Seq : 13
[12:43:42:303] : Sending Pkt Seq : 14
[12:43:42:303] : Sending Pkt Seq : 15
[12:43:42:303] : Sending Pkt Seq : 16
[12:43:42:304] : Sending Pkt Seq : 17
[12:43:42:304] : Sending Pkt Seq : 18
[12:43:42:304] : Sending Pkt Seq : 19
[12:43:42:304] : Sending Pkt Seq : 20
[12:43:42:304] : Sending Pkt Seq : 21
[12:43:42:304] : Sending Pkt Seq : 22
[12:43:42:305] : Sending Pkt Seq : 23
[12:43:42:305] : Sending Pkt Seq : 24
[12:43:42:316] : Dl_AsyncWrite - ErrNo(45), Addr(0x0000C000), NandErrNo(0x04)
[12:43:42:316] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[12:43:42:316] : Clear
[12:43:42:316] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[12:43:42:316] : Close Port<<
[12:43:42:316] : TYPE_WPARAM_UPGRADE_ERROR
[12:43:42:316] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[12:43:42:382] : Log finished
And then I thought that i should try in a different computer. So I Removed the battery and then put it back again. And the result:
My phone does not even switch on.
HELP HELP
PS: I've searched through... Found no solution. Please help me out! Anyone!
same happened with me. tell me what to do
Sorry bro but it looks like only lg service center can help you
I too bricked my phone by taking battery out when stuck in emergency mode
I tried many things but nothing worked for me.
At last i went to lg service and they replaced its mainboard for around Rs.1400 as my phone was not under warranty.
If your phone is under warranty then they will do it for free.Just tell them you were on froyo and just trying to update to gb using lg pc suite.Don't mention rooting or kdz or any such thing.
Though you could still try following things(imo just false hope):
1.Charge the phone for a night and see if it boots up.
2.Remove the battery and try to connect your phone to pc while pressing combo for emergency mode(BACK+VOLUME UP+POWER). Try only BACK+VOLUME UP too. If your phone enters emergency mode, then you are in luck:good: Use lgmdp to flash this time.
3.There is a method using RIFF JTAG or something which basically involves buying an expensive tool,opening your phone, soldering some wires to it and then "resurrect" it.
GobletSky31689 said:
Sorry bro but it looks like only lg service center can help you
I too bricked my phone by taking battery out when stuck in emergency mode
I tried many things but nothing worked for me.
At last i went to lg service and they replaced its mainboard for around Rs.1400 as my phone was not under warranty.
If your phone is under warranty then they will do it for free.Just tell them you were on froyo and just trying to update to gb using lg pc suite.Don't mention rooting or kdz or any such thing.
Though you could still try following things(imo just false hope):
1.Charge the phone for a night and see if it boots up.
2.Remove the battery and try to connect your phone to pc while pressing combo for emergency mode(BACK+VOLUME UP+POWER). Try only BACK+VOLUME UP too. If your phone enters emergency mode, then you are in luck:good: Use lgmdp to flash this time.
3.There is a method using RIFF JTAG or something which basically involves buying an expensive tool,opening your phone, soldering some wires to it and then "resurrect" it.
Click to expand...
Click to collapse
when did you repair it and where do you stay?? btw, i never knew that the phone can also boot up without a battery. Did you guys know? Try following:
1. Remove battery
2. Connect phone to PC.
Check!
and i tried all you suggestions... But none worked. I guess the motherboard is gone
:crying:
Lol you need to wipe in CWMin mounts and storages)
Data
Cache
System
Boot
Flash
Reboot happy
Sent from my LG-P500
I just arrived from the service centre. I'm sorry but my LG-P500 is no more... They are asking me to replace the board. Telling that a new one would cost Rs 9000. @GobletSky31689 : Can you tell me where you stay? Which service centre did you approach for getting it repaired?
chiragmodi said:
I just arrived from the service centre. I'm sorry but my LG-P500 is no more... They are asking me to replace the board. Telling that a new one would cost Rs 9000. @GobletSky31689 : Can you tell me where you stay? Which service centre did you approach for getting it repaired?
Click to expand...
Click to collapse
Check your PM.
Also are you sure you approached official LG??
I got their address from this no 1800 180 9999 (they gave me another no. for lgmobile and then they gave me service center's no.).
Also is that service center present in this page:
http://www.lgmobiles.com/autosys/ascdetails.php?state=Tnd
P.S.
Sorry, but your comment slightly confused me:
chiragmodi said:
btw, i never knew that the phone can also boot up without a battery. Did you guys know? Try following:
1. Remove battery
2. Connect phone to PC.
Check!
Click to expand...
Click to collapse
Is your PC(or even the charger) is detecting the phone ??
GobletSky31689 said:
Check your PM.
Also are you sure you approached official LG??
I got their address from this no 1800 180 9999 (they gave me another no. for lgmobile and then they gave me service center's no.).
Also is that service center present in this page:
http://www.lgmobiles.com/autosys/ascdetails.php?state=Tnd
P.S.
Sorry, but your comment slightly confused me:
Is your PC(or even the charger) is detecting the phone ??
Click to expand...
Click to collapse
Yes... I went to an official service centre... I now have given it to an electronic market shop famous in repairing mobiles here in chennai. Argh... missing my LG... and answering to you P.S. message... no... my phone is not even detected...
Argh! guys.. i have successfully bricked my phone... I miss it! Loved it... Regret it! I murdered it! But it taught me a LOT!
yOU CAN SELL pARTS LIKE THE BATTERY BOODY SCREEN
LG optimus one dead
i have searced this site for forums with solutions for bricked lg optimus one
my phone does not enter in emergency mode nor does it factory reset
tried connecting it in wall charger and to pc using usb cable with and without the battery but charging screen does not show up
i am on new baseband version and flashed CWM 5.0.2.0 as it is more stable than the new baseband version
i successfully flashed CM 7.2.0 (stable) four days ago and i loved it
yesterday after making a call from my phone with low battery (2 %) it automatically switched off. i charged it upto 60 % and switched it on. it worked for an hour and after that it just won't respond. my phone is not under warranty
It's an hardware issue.. i guess!! Try charging it for 3.. 4 hours Using Charger even if it doesnt respond!!
Related
Ebay optimus V bricked?
Just picked up an optimus V off of ebay with a clean ESN and now all I am getting is an LG boot loop. Tried a bunch of combinations Home, vol down, power return, vol down, power while plugging in menu and power None worked. Not sure where to go from here. Never had the issue with my captivate. If it is bricked, which solution should I go about unbricking it?
Try home volume up Sent from my LG-P500 using XDA
Nope, it does it's loop but then a blank screen blinks and it goes off. Left it plugged in for 2 hours and it just kept repeating the cycle, no battery charging, nothing.
Alright, i've been screwing with it for a few hours now. Got into e-mode and tried flashing the optimus S (sprint) to try and unbrick it with this method http://androidforums.com/optimus-v-...-how-fix-bricked-lg-optimus-v-s-firmware.html But at step 9, it doesn't detect it while it's in e-mode, and when I put it in normal mode, it updates, gets to 94% and reboots, after which it sits in its LG splash loop. Unable to do anything besides boot it back into e-mode.
Veight said: Alright, i've been screwing with it for a few hours now. Got into e-mode and tried flashing the optimus S (sprint) to try and unbrick it with this method http://androidforums.com/optimus-v-...-how-fix-bricked-lg-optimus-v-s-firmware.html But at step 9, it doesn't detect it while it's in e-mode, and when I put it in normal mode, it updates, gets to 94% and reboots, after which it sits in its LG splash loop. Unable to do anything besides boot it back into e-mode. Click to expand... Click to collapse Why would u want to flash a optimus S firmware on optimus V?
allenwalker1998 said: Why would u want to flash a optimus S firmware on optimus V? Click to expand... Click to collapse Because that seems to be the only way to unbrick it.. Can't get into recovery and stuck in an LG splash loop.
Veight said: Because that seems to be the only way to unbrick it.. Can't get into recovery and stuck in an LG splash loop. Click to expand... Click to collapse U should flash optimus v firmware on optimus v then only it will unbrick.
allenwalker1998 said: U should flash optimus v firmware on optimus v then only it will unbrick. Click to expand... Click to collapse Mind directing me to a working way to unbrick using optimus v firmware?
Veight said: Mind directing me to a working way to unbrick using optimus v firmware? Click to expand... Click to collapse U either use kdz or LGDMP to flash the firmware
allenwalker1998 said: U either use kdz or LGDMP to flash the firmware Click to expand... Click to collapse From what I have read there isn't any working optimus v firmware out. The original that was leaked over a year ago was missing a dll and it hasn't worked since.
For kdz: Pre steps) turn off lg USB modem 1) turn the phone into e.mode and plug in. 2)start up kdz and select 3gqct 3) flash firmware and wait. (Mine took 1 hour) 4) if successful, ur phone should be unbricked. If unsuccessful, change the mode in kdz but not the 3gqct
Veight said: From what I have read there isn't any working optimus v firmware out. The original that was leaked over a year ago was missing a dll and it hasn't worked since. Click to expand... Click to collapse Use O1's firmware then should be able to work.
allenwalker1998 said: Use O1's firmware then should be able to work. Click to expand... Click to collapse O1's firmware?
Veight said: O1's firmware? Click to expand... Click to collapse Optimus one firmware
allenwalker1998 said: Optimus one firmware Click to expand... Click to collapse Alright. Attempting it with V20G_00.kdz and keep getting "Upgrade Error WParam: 100 LParam: 502" No matter which type I attempt.
Veight said: Alright. Attempting it with V20G_00.kdz and keep getting "Upgrade Error WParam: 100 LParam: 502" No matter which type I attempt. Click to expand... Click to collapse Can u take a screen shot?
Here's a log and SS of the error/attempt Code: [08:20:21:506] : ============================================= [08:20:21:506] : Log is started on 21.06.2012, at 08:20:21:506, executable: C:\Users\Veight\Downloads\kdz_fw_upd_en\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x00002164), compile time : Dec 8 2010 09:19:37 [08:20:21:506] : Version : [08:20:21:507] : Get Usb Port [08:20:21:508] : rsi.strFriendlyName=Communications Port (COM1) [08:20:21:508] : Remove Communications Port (COM1) [08:20:21:508] : rsi.strFriendlyName=LGE Mobile USB Serial Port (COM4) [08:20:21:508] : FriendlyNameList[iii].szFriendlyName=LGE Mobile USB Serial Port [08:20:21:508] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM4 [08:20:21:508] : Port = COM4 [08:20:26:511] : RX Timeout : 5.0 seconds [08:20:26:511] : RX TIMEOUT [08:20:26:512] : UNKNOWN : Req(12) -> Rsp(13) [08:20:31:523] : RX Timeout : 5.0 seconds [08:20:31:523] : RX TIMEOUT [08:20:31:523] : >> DIAG_STATUS_F FAILED [08:20:31:528] : >>Get Model Name [DIAG_VERNO_F] [08:20:31:529] : BAD CONN MODE : Req(0) -> Rsp(3) [08:20:34:540] : RX Timeout : 3.0 seconds [08:20:34:540] : RX TIMEOUT [08:20:34:541] : BAD CONN MODE : Req(0) -> Rsp(3) [08:20:37:552] : RX Timeout : 3.0 seconds [08:20:37:552] : RX TIMEOUT [08:20:37:553] : BAD CONN MODE : Req(0) -> Rsp(3) [08:20:40:565] : RX Timeout : 3.0 seconds [08:20:40:565] : RX TIMEOUT [08:20:40:565] : FAIL (No Phone) [08:20:40:565] : GetModelName() Operation Failed Check Diag CMD [08:20:40:565] : EMERGENCY Booting Mode [08:20:40:565] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F] [08:20:40:566] : LS670ZVD [08:20:40:566] : First two character of model name is not BS [08:20:40:566] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - No Phone [08:20:40:566] : GetEmergencyModelName in Emergency Mode - FAILed (No Phone) [08:20:40:566] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port [08:20:40:566] : Close Port<< [08:20:40:566] : TYPE_WPARAM_UPGRADE_ERROR [08:20:40:566] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 502 [08:20:40:594] : Log finished
Switch type to 3gqct Switch phonemode to emergency and check that LG USB modem is turned off Sent from my LG-P500 using xda premium
allenwalker1998 said: Switch type to 3gqct Switch phonemode to emergency and check that LG USB modem is turned off Sent from my LG-P500 using xda premium Click to expand... Click to collapse Modem is disabled in device manager. Heres the full log file after I hit okay to the error message. Code: [R&D Test Tools Log File] 09:00:24 : Launching SW update 09:00:24 : Unpacking KDZ 09:00:25 : KDZ file extraced 09:00:25 : Files were extracted. 09:00:25 : LGMobileDL Load. 09:00:25 : Port = -1 09:00:25 : Connecting to phone 09:00:36 : Check Phone mode = 2 09:00:43 : Phone type check....... 09:00:44 : LGMobileDL.DLL Loading.... 09:00:45 : _SetAuthMark Fail 09:00:45 : _SetAuthMark Ok : wAuthMark(23043) 09:00:45 : _DetachDLL Call 09:00:45 : _DetachDLL Call End 09:00:45 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V20g-ESA-XX-SEP-21-2011+0-DZ.dz 09:00:45 : Param : moduleDir = 09:00:45 : Param : waitTime = 1 09:00:45 : Param : UsbHighSpeed = 1 09:00:45 : Param : PhoneMode = 2 09:00:45 : Param : BinVersion = V20G_00 09:00:45 : Param : AuthMark = 23043 09:00:45 : Call fn_StartUpgrade 09:01:06 : CDMA: wParam = 100, lParam = 502 09:01:06 : Step : Upgrade Error2 - Error Code : 502 09:01:06 : ResetStartInfo() Call 09:01:06 : _DetachDLL Call 09:01:06 : _DetachDLL Call End 09:01:06 : FreeLibrary Call 09:01:06 : FreeLibrary Call End 09:01:06 : ResetStartInfo() Call End 09:01:07 : ===FINISHED=== 09:02:05 : OnModelDllMsg(OnMsgFromModelDll-CDMA) delete m_pLGCyonUpdate
Just an update. Installed windows xp into a VM and tried it since i saw some people were having issues with Windows 7 X64 and no go. Same error. :\
On screen informations problem
After OTA update on my screen i got this informations : (update to 4.04) Modem : xxlq5 HW : mp 1400 PDA : bla bla Phone : CSC : RF Cal. Date : SMD, PBA : TSP : TSK : Unique Number: How to remove it?
Danilo Cvjeticanin said: After OTA update on my screen i got this informations : (update to 4.04) Modem : xxlq5 HW : mp 1400 PDA : bla bla Phone : CSC : RF Cal. Date : SMD, PBA : TSP : TSK : Unique Number: How to remove it? Click to expand... Click to collapse check the link below, post#7 in the same, there is a solution for it http://forum.xda-developers.com/showthread.php?t=1896343
[Q] Lg f240L Imei
Hy I am facing some problems While usig Lg f240L Imei Unknown No signal sdcard inserted but not mounted I just change it to Lg e988 but not Worked I also changed it to lg e980 but facing same problem Please help me Here's all info - MODEL : LG-E980 - MANUFACTURER : LGE - VERSION : 4.4.4 - PRODUCT NAME : geefhd_open_eu - DISPLAY ID : slim_e980-userdebug 4.4.4 KTU84Q eng.meo.20140909.171900 test-keys - BOARD : geefhd - PLATFORM : msm8960 - BUILD ID : KTU84Q - BUILD VERSION : eng.meo.20140909.171900 - PDA : eng.meo.20140909.171900 - UDISK LABEL : eng.meo.20140909.171900 - SERIAL NO. : LGF240L4d0d06da - IMEI : NULL - TYPE : CDMA --------------------------------------------------------------------- - Battery Info : --------------------------------------------------------------------- -- WIRELESS POWERED: FALSE -- STATUS: 2 -- PRESENT: TRUE -- LEVEL: 73 -- SCALE: 100 -- VOLTAGE: 4015 -- CURRENT NOW: -13900 --------------------------------------------------------------------- - Checking SD Card... Not available. - Checking External SD Card ... Not available.
LG P760: Stuck In Bootloop
Hello, About 2 months ago I had security error on my LG P760 device, so I flashed same ROM version (v20o) with R&D Test Tool. But there was sth wrong with the ROM and recently during reboot, android got into bootloop. I tried to hard reset it with the key combination, but there appeared the logo of dead android with red tiangle and so it did every time on. I wanted to flash a new ROM with the same R&D Test Tool. Unfortunately (whichever official ROM version I wouldn't try) the upgrade process is stuck at 50% for a couple of seconds and then stops with an error. With a different flash tool the same happens. Here is the interesting part of a log from one of the sessions: Code: 16:29:22 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME 16:29:22 : wParam : 2004, lParam = 50 16:29:22 : MODEL DLL Event : (2004, 50) 16:29:23 : Step : TYPE_WPARAM_IFX_DN_POS // UPGRADE IS STUCK HERE 16:29:54 : wParam : 2010, lParam = 3017 16:29:54 : MODEL DLL Event : (2010, 3017) 16:29:57 : Step : TYPE_WPARAM_UPGRADE_ERROR 16:29:57 : CleanModelDll() : Free Model.dll 16:29:57 : _DetachDLL Call 16:29:57 : _DetachDLL Call End 16:29:57 : Page_Error şÎşĐŔÔ´Ď´Ů 16:29:57 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů Now, after few trials of upgrade that has been stuck at that 50%, device even doesn't show the boot logo. The only thing I can do with it is to enter S/W mode. I ask for any help with it.
[P760] Bootloop, dead android and flash error
Hello, About 2 months ago I had security error on my LG P760 device, so I flashed same ROM version (v20o) with R&D Test Tool. But there was sth wrong with the ROM and recently during reboot, android got into bootloop. I tried to hard reset it with the key combination, but there appeared the logo of dead android with red tiangle and so it did every time on. I wanted to flash a new ROM with the same R&D Test Tool. Unfortunately (whichever official ROM version I wouldn't try) the upgrade process is stuck at 50% for a couple of seconds and then stops with an error. With a different flash tool the same happens. Here is the interesting part of a log from one of the sessions: Code: 16:29:22 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME 16:29:22 : wParam : 2004, lParam = 50 16:29:22 : MODEL DLL Event : (2004, 50) 16:29:23 : Step : TYPE_WPARAM_IFX_DN_POS // UPGRADE IS STUCK HERE 16:29:54 : wParam : 2010, lParam = 3017 16:29:54 : MODEL DLL Event : (2010, 3017) 16:29:57 : Step : TYPE_WPARAM_UPGRADE_ERROR 16:29:57 : CleanModelDll() : Free Model.dll 16:29:57 : _DetachDLL Call 16:29:57 : _DetachDLL Call End 16:29:57 : Page_Error şÎşĐŔÔ´Ď´Ů 16:29:57 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů Now, after few trials of upgrade that has been stuck at that 50%, device even doesn't show the boot logo. The only thing I can do with it is to enter S/W mode. I ask for any help with it.
hi,try lg pc suite,turn on phone in S/W mode and in lg pc suite click mobile device then restore upgrade errrors
I didn't reply recently, cause I had my batttery being charged by a friend of mine. anukelis said: hi,try lg pc suite,turn on phone in S/W mode and in lg pc suite click mobile device then restore upgrade errrors Click to expand... Click to collapse I tried this and LG PC Suite says: "No upgrade items to fix" (just like LG Support Tool does).
Maybe I should try fastboot? But how?