hye..im having problem with the new rom..ive flash the Homics Venus 2.0 but i accidentally installed the patches and extras as well.. and now the phone only boot untill the moving neon lights and keep repeating that..is it going to stuck in here only or it will boot up after a while?
kljb said:
hye..im having problem with the new rom..ive flash the Homics Venus 2.0 but i accidentally installed the patches and extras as well.. and now the phone only boot untill the moving neon lights and keep repeating that..is it going to stuck in here only or it will boot up after a while?
Click to expand...
Click to collapse
just flash it again.
wipe everything then flash the ROM, boot once, than flash the patch.
hee..thnx..actually b4 i dont know how to go to recovery mode cuz when i try to, i got the red triangle thing..but now got the solution..flashed it back to cm7.2 then try the homics again..works..hee
kljb said:
hee..thnx..actually b4 i dont know how to go to recovery mode cuz when i try to, i got the red triangle thing..but now got the solution..flashed it back to cm7.2 then try the homics again..works..hee
Click to expand...
Click to collapse
good job :good:
Good ROM
That is good ROM.
I'm using!
I had some problems with the same rom, sometimes my phone made master reset and restart by itselfs ?! i wipe everythink befor flash, and i flashed the rom a couple of times , the problem still, the otrer one i when i manualy do a master reset the phone won't boot , it freeze on the boot animation
Related
Hello.
After running for months cm7 old baseband with no prob, today i decided to try cm9.
So i grabbed my copy of Arjen cm9, latest nightly, gapps, installed it. Then upgraded to new baseband 20G using LGMDP.
The phone booted, all fine, but there was no network. So i tryed reinstalling the new baseband, same story. The third time i reinstalled the new baseband, phone booted with stock lg gingerbread. So i reinstalled arjen cm9, but phone remained stuck at boot animation at the firts rebooot before installing google aps.
Then i decided to restart the process once again and redoing root, recovery etc. These are the step i took:
1) used KDV to reinstall lg stock ginger with 20G baseband.
2)rooted from gingerbread, installed rom manager, installed CWM.
3) reboot in CWM, wiped all, formatted with ext size 256mb and swap size 64mb.
4) copied rom and gapps, wiped everything another time.
5) installed arjen cm9, re booted, again stuck at boot animation.
6) re formatted, re wiped, tryed another rom ([2012.6.5] MIUI PORT by DHK).
7)rebooted, again stuck at boot animation.
No matter how many time i reboot or how many CM9 version i try, after the new baseband upgrade only the lg stock gingerbread seems to boot without remain stuck at boot animation.
Please help me with this new baseband/ cm9 thing, because i seem the only one that doesn't get it!
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Madpiercing said:
Hello.
After running for months cm7 old baseband with no prob, today i decided to try cm9.
So i grabbed my copy of Arjen cm9, latest nightly, gapps, installed it. Then upgraded to new baseband 20G using LGMDP.
The phone booted, all fine, but there was no network. So i tryed reinstalling the new baseband, same story. The third time i reinstalled the new baseband, phone booted with stock lg gingerbread. So i reinstalled arjen cm9, but phone remained stuck at boot animation at the firts rebooot before installing google aps.
Then i decided to restart the process once again and redoing root, recovery etc. These are the step i took:
1) used KDV to reinstall lg stock ginger with 20G baseband.
2)rooted from gingerbread, installed rom manager, installed CWM.
3) reboot in CWM, wiped all, formatted with ext size 256mb and swap size 64mb.
4) copied rom and gapps, wiped everything another time.
5) installed arjen cm9, re booted, again stuck at boot animation.
6) re formatted, re wiped, tryed another rom ([2012.6.5] MIUI PORT by DHK).
7)rebooted, again stuck at boot animation.
No matter how many time i reboot or how many CM9 version i try, after the new baseband upgrade only the lg stock gingerbread seems to boot without remain stuck at boot animation.
Please help me with this new baseband/ cm9 thing, because i seem the only one that doesn't get it!
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Click to expand...
Click to collapse
What do you see when you're booting your phone?
Fastboot Mode? Stuck at LG logo?
Sent from my LG-P500 using xda premium
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Click to expand...
Click to collapse
when you see the battery logo..hold power button again..and your phone will boot normally..
If dont works so go to recovery a and from cwm reboot system..other way to start the phone..
LG-P500-ICS-4.0.4
I've done it guys.. I had to install again gingerbred and 20G with KDZ, then re rooted, donwloaded rom manager, installed CWM, and then i installed again CM9 and it worked.. dunno what's gone wrong last time, i have done the exacts same steps and now it works!
Thanks for the help
Hey,
I wanted to update my Gingerbread MIUI and picked an ICS version cause I didn't look properly.
Now I'm stuck at the xiaomi logo and also can't get into recovery to do anything.
Is there a way to fix this?
I appreciate your help guys!
Damnation
No recovery (assuming you're not pressing the wrong key combo) = flash stock rom in Odin to get a 'clean slate'. Then you can re-root your phone & try Miui again if you're still game.
sounds like
it sounds like you never deleted all data, dalvek cache or reset phone before you installed new rom.
just a thought
its aslo usefull to install rom, when finished while in rec. mode find fix permissions, clickn run, reboot then.
THEN istall updated gapps recommended in rom thread (if rom doesn't have gapps (google apps) preinstalled, romthread will tell you)and repeat fix perm. clickn reboot. dont make the mistake of doing it All at once ive found this helps
damnation333 said:
Hey,
I wanted to update my Gingerbread MIUI and picked an ICS version cause I didn't look properly.
Now I'm stuck at the xiaomi logo and also can't get into recovery to do anything.
Is there a way to fix this?
I appreciate your help guys!
Damnation
Click to expand...
Click to collapse
Yeah, and don't forget to do a factory/data reset after u flashed any ROM, custom or stock. If you do that the phone wont get stuck on the boot screen(S logo). Happened to me xD
Whenever I try install a custom rom, my streak never gets past the loading screen after the dell logo. I've tried streakdroid and longhorn both get stuck on a loading screen. How can I get my streak running a custom rom? :/ I've followed all the instructions and I'm not sure what I'm doing wrong.
of course first boot usually takes time to initialized itself... subsequent boot usually only take around 30 - 45 seconds only...
Yes I am aware first boot takes longer, but as I said in my first post, it freezes. It starts the loading process again.
It's seems you flash a custom rom that need mod kernel. To flash mod kernel you have to unlock boot loader.
It happen to me once, stuck at SONY logo.
Try to flash with stock rom, it will be fine (i hope).
frisman said:
It's seems you flash a custom rom that need mod kernel. To flash mod kernel you have to unlock boot loader.
It happen to me once, stuck at SONY logo.
Try to flash with stock rom, it will be fine (i hope).
Click to expand...
Click to collapse
All of the custom ROMs have the correct Kernels built into the ROM.
Did you perforn BOTH factory resets after flashing?
tenorntex said:
All of the custom ROMs have the correct Kernels built into the ROM.
Did you perforn BOTH factory resets after flashing?
Click to expand...
Click to collapse
What other factory reset it there besides the one in clockwork recovery? And how do I do it?
the menu in white text...
1. factory reset
2. software upgrade via update.pkg on sd card
3. screen calibration
4. power off
select 1
though when you do that, all data would be erased....
Beauie said:
What other factory reset it there besides the one in clockwork recovery? And how do I do it?
Click to expand...
Click to collapse
That is your first mistake. You should be using streakmod.
Sent using Longhorn 2.8, ICS Longhorn 1.4.2, and Longhorn Betas
Hi!
My phone is bootlooping. I tried to get the new stock Jelly Bean Rom but when i flashed with Odin my phone just gets to the bootanimation. Tried many stock firmawares. Have stock recovery and no root (I think). Can anyone help me. Need the phone to work very quickly.
Can you boot to recovery and clear the Dalvik cache and reboot your phone? This fix my bootloop before.
Recovery
I can't get into the stock recovery for some reason...
TheAlexVae said:
I can't get into the stock recovery for some reason...
Click to expand...
Click to collapse
Remove your battery wait for 5min insert it and try to get into recovery. After getting into d recovery wipe/reset/cahe/dalvik/everything
How are you trying to get into recovery?
I tried to get to the recovery using the home, volume and power.
I had my phone working after downloading some firmware, got the three part firmware. So it's working again, thanks to all the answers:laugh
please forgive me if this has been asked before. i've tried searching but can't seem to find any fix. my phone was working great but i wanted to try a new rom since i was getting bored. my mistake.. anyway i have CWM recovery on my atrix and it worked good. i've flashed roms before.i was flashing between Neutrino ROM V2.9 and V3 trying to see if i could get the CMsettings to work on V3 without crashing. anyway after a while i gave up and decided to full wipe and just flash V2.9. after the ROM flash i reboot the phone but got a boot loop so i pulled the batter and tried to boot into recovery to wipe and flash again but when i select Android Recovery it just hangs at a black screen. what happened? can it be fixed quickly because my battery before the final flash was about 30%
BTW.. i've tried to reflash the recovery through fastboot and my compute the way i did it when i fist unlocked my phone and flashed the recovery but still no luck... still hang at blank screen after selection Android Recovery
never mind i fixed the problem.... had to flashed a different recovery (in this case TWRP) and then flash back to CWM recovery. idk the reason why but it worked and now my phone is back on and just in time with only 5% battery life left after all the trial and error flashing..
ok i figured out what caused my recovery to crash in the first place. its the gapp addon. when i flash that zip and reboot i get a boot loop and my recovery is gone. first i though it was the zip file that was damaged so i re-downloaded the gapp addon from Neutrino ROM V2.9 fourm but now chrome says the zip is infected so ok i went and download the full gapp addon for CM7 rom and that flashes without crashing my recovery but when the phone restarts i can't access half the gapp like market and gmail and a few others. they show that they are installed in Manage Applications but they don't show up in the app drawer.. whats the problem now? i've never had this problem before