Hi friends...
I was using tata docomo gprs for the last 10 days, but i cant access net after i chose 'KILL ALL' option in 'BATTERY SAVER'. I tried switching off and removing sim and then reinserting; restoring all factory settings ; to download from tata server itself; manulal setting with
Name : TATADOCOMOINTERNET
APN: TATA.DOCOMO.INTERNET
Proxy: <none>
Port: 8080
Usename :<none>
Password:<none>
MMSC:<none>
MMS Proxy: <none>
MMS Port:<none>
MCC : 405
MNC: 03
Authentication Type: <none>
APN Type: <none>
still i cant access net. BUT now its showing the gprs emblem, but cant access net...
plese help me with your valuable suggestions or ideas......
THANKS IN ADVANCE.......
Try with other sim to begin with.
Sent from my MT11i using Tapatalk 2
Related
Greetings
Successfully rooted and flashed my first smartphone (p500) using these forums and everything is working fine except for mms. I'm running Noejn's void echo and found the following apn info right on Koodo's (Canada) web site:
APN: sp.koodo.com
Proxy server: 74.49.0.18
Port: 80
Username:
Password:
Server:
MMSC: h t t p://aliasredirect.net/proxy/koodo/mmsc
Proxy server: 74.49.0.18
Port: 80
MCC : 302
MNC : 220
APN type :
This got my data and sms working again but for the life of me I cannot figure out how to get MMS working. When I attempt to send a mms my data icon lights up as if it's going but it just says "sending" forever and nothing happens. I restored back to the stock ROM and noticed that the APN type: was "default,mms,supl,dun" so I flashed back to the void ROM and configured it that way but still no go.
As I'm really new to this I thought I'd ask if there is some basic step I am missing in configuring the APN or data network or if this is just because the ROM is somehow incompatible with my carrier. I've searched the forums and web but can't seem to find anything other than the info I've pasted above.
APN: sp.koodo.com
Proxy server: 74.49.0.18
Port: 80
Username:
Password:
Server:
MMSC: h t t p://aliasredirect.net/proxy/koodo/mmsc
Proxy server: 74.49.0.18
Port: 80
MCC : 302
MNC : 220
APN type : default,mms,supl,dun
Click to expand...
Click to collapse
Is what my P500 Shipped with, that should clear it up.
I also have network settings for about 30 more countries so just ask in this forum and all post them.
ATT and MEdia Net, Rogers, and others Settings are at the bottom of this post
but it’s a good thing to check all your settings and write them down before you start.
This stuff is for rooting and Flashtool
Also at the bottom of the post are the apps that work for me I can get 24 to 36 hours of normal use checking mail,news weather,calls,texting alot and Facebook. And about 18 hours of all the above an heavy web use downloads,videos and surfing and then some.
x10a ATT USA 2.1.updated-1
Wintec filemate mobile pro 16gb class 10 card
Benchmarks are 777ish per the Quadrant app pictures below set at 3072kb.
Also before “I” started I did a factory reset and did a SE updates/Pc companion update/repair ( And did a reboot “restarted” )So I started with a fresh up to date phone. Then followed the guides To the letter.
These guys now what there doing I have had no problems at all with my phone signals and operations are even better now but you be the judge.
This Firmware will get the Sony update for 2.3
X10a generic 2 1 A 0 435 with DualTouch already thanks to Bin4ry
Or your global generic Stock Firmware.
Forum for a Stock Firmware 2.1.1.A.0.16 BB 2.1.58. Read in theses posts/Forums about them to be sure they work.
http://forum.xda-developers.com/showthread.php?t=936733
Thank you arkedk Senior Member For Guides,Tools and Roms.
Root install Xrecovery And then BACKUP Stock Firmware with Xrecovery
then Flash Firmware/Rom
[FLASHTOOL GUIDE] HOW TO for n00bies
Thank you
rendeiro2005,Bin4ry Senior Members for the Guides,Tools and Roms.
http://forum.xda-developers.com/showthread.php?t=928343
I use 2.8 if you are a noobie like me it works.
( [UPDATE 22/03/2011] Flashtool BETA version 0.2.9.1 )
Thank you
Bin4ry Senior Member and Androxyde Senior Member for the Guides,Tools and Roms.
And watch the video ( http://www.youtube.com/watch?v=B9_pFOxPJUY )
Thank you BluechipJ for the Video.
This video is old but the updated 2.8 flasher works fine you can root and all the stuff in it works fine. [UPDATE 22/03/2011] Flashtool BETA version 0.2.9.1.
Read the new forums for the new roms if you want something other then the 2.1.1updated
ALL WAYS RUN FLASHTOOL IN Administrator (right click app click run as Administrator) do not click open (on XP pro any way) but read the forums for your OS I’m sure it’s there. Be sure to check DATES and updates on forums
And this thread it has some good stuff.
http://forum.xda-developers.com/showthread.php?t=955703
Thank you DooMLoRD Senior Member For Guides,Tools and Roms.
ROOT FIRST check perm then Install xRecovery, then all rest. Read the forum on how to.
Also check ALL DATES on ALL Posts,roms an apps "software" you download. And use only Updated Stuff but be careful of Beta just check in the Forum for what works and what doesn’t also check back or better yet Subscribe to XDA and to THAT forum and Senior Member so you can keep up to date on your x10
Oh and the biggest thing to remember is to THANK ALL THESE GUYs. So cools have fun be patient and read all BEFORE you start.
DO NOT KILL APPs they will/may just restart again and kill battery power
If you want to stop an app use Titanium Backup freezer to see if there are any problems first.
Mobile network settings
You should also have a Network operator button. Settings/wireless & network/mobile networks/network operators/search networks. Also/search mode/select automatically.
and if that works click the one with the home/house on it that way your not roaming.
Also you can put as many APNs as you like but the default should always be your provider and if you make a mistake you can dismiss or just delete APN.
USA/some Canada Networks
Settings/Wireless & Networks/Mobile Networks/Network Mode/Click GSM only/Then Click middle button on phone/restart phone.
Some USA/European/Asian/Canada Networks.
Settings/Wireless & Networks/Mobile Networks/Network Mode/Click GSM/WCDMA preferred/Then Click middle button on phone/restart phone.
European/Asian/Some Canada Networks
Settings/Wireless & Networks/Mobile Networks/Network Mode/Click WCDMA only/Then Click middle button on phone/restart phone
Go to Settings/Wireless&network settings/ Mobile network settings/Access point names/menu button on left of phone/new apn. Only change the setting that are described and are Case Sensitive leave all others as they are. After you put in the settings click the menu button on
(bottom left button on phone) and click save. Reboot phone may have to do it two times and wait a few between each boot to see if it worked.
USA
Operator: AT&T (3G,2g,Edge)
APN: wap.cingular
Username:[email protected]
Password:CINGULAR1
MMSC:http: //mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
Rogers APN (3G) Settings:
Operator: Rogers
APN: rogers-core-appl1.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
Operator: MEdia Net
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
MCC: 310
MNC: 410
APN type: defaul.supl
Name: MEdia Net MMS
APN: wap.cingular
Username: [email protected]
Password: CINGULAR1
MMSC: http//mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms
Only change the setting that are described and are Case Sensitive leave all others as they are.
Multi-Country
Operator: United Mobile ( roaming service)
APN: ulm.com
User name: umdata
Password: internet
Albania
Operator: Vonafone
APN: Twa
User Name: guest
Password: guest
Angola
Operator: Unitel
APN: internet.unitel.co.ao
User name: guest
Password: guest
Australia
Operator: Optus (2g)
GPRS APN: internet
Username: guest
Password: guest
DNS: 202.139.83.3, 192.65.91.129
SMTP Server: mail.optusnet.au
Operator: Optus (3g)
GPRS APN: connect
Username: guest
Password: guest
DNS: 202.139.83.3, 192.65.91.129
SMTP Server: mail.optusnet.com.au
Operator: Optus (3g prepay)
APN: preconnect
User Name: guest
Password: guest
DNS: 202.139.83.3, 192.65.91.129
SMTP Server: mail.optusnet.com.au
Operater: Telstra (2g)
APN: testra.internet
User Name: guest
Password: guest
DNS: 203.50.2.71,139.130.4.4
SMTP Server: mail.bigpond.com
Operater: Telstra (3g data bundles)
APN: testra.datapack
Password: Talstra
DNS: 203.50.2.71,139.130.4.4
SMTP Server: mail.bigpond.com
Operater: Telstra (3g pay by time)
APN: testra.pcpack
Password: Talstra
DNS: 203.50.2.71,139.130.4.4
SMTP Server: mail.bigpond.com
Operater: Telstra (3g prepay)
APN: testra.wap
Password: Telstra
DNS: 203.50.2.71,139.130.4.4
SMTP Server: mail.bigpond.com
Operator: Telstra
GPRS APN: telstra.internet
DNS: 139.130.4.4, 203.50.170.2
Operator: Three (contract)
GPRS APN: 3netaccess
Username: guest
Password: guest
DNS: 202.124.68.130, 202.124.76.66
SMTP Server: smtp.three.com.au
Operator: Three (prepay)
GPRS APN: 3netaccess
Username: guest
Password: guest
DNS: 202.124.68.130, 202.124.76.66
SMTP Server: smtp.three.com.au
Operator: Three
GPRS APN: 3netaccess
Username: a
Password: a
DNS: 202.124.68.130, 202.124.76.66
Operator: Virgin Mobile
APN: VIRGININTERNET
User Name: guest
Password: guest
Dns: 61.88.88.88
Operator: Vodafone
GPRS APN: vfinternet.au
DNS: 192.189.54.33, 210.80.58
SMTP Server: smtp.vodafone.net.au
Go to Settings/Wireless&network settings/ Mobile network settings/Access point names/menu button on left of phone/new apn. Only change the setting that are described and are Case Sensitive leave all others as they are. After you put in the settings click the menu button on
(bottom left button on phone) and click save. Reboot phone may have to do it two times and wait a few between each boot to see if it worked.
X10a Codes
How toTurn off all Call Forwarding not ( voicemail or caller ID ) on ATT network. #002# in dial pad and press call. This works in USA and ?.
You have to do this every time you check call forwarding settings for it to work all the time because every time you check the button it resets back to default which is on.
X10 Test mode
From the unlock screen, do not unlock but press
1.6
Menu Back Back Menu
Back Menu Menu Back
2.1
Home Back Back Home
Back Home Home Back
Phone/battery/Usage info: *#*#4636#*#*
IMEI number: *#06#
Software version: *#8377466#
Be careful with this one it may or may NOT work
AGAIN BE CAREFUL WITH SOME CODES I'M NOT RESPONSIBLE IF YOU PUT IN THE WRONG CODES OR THEY DO NOT WORK ON YOUR PHONE
Information about SIMLOCK:
Enter to phone menu without SimCard - after Wrong PIN: press NO:
* * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
___________________________________________________________________
My preferred apps but you be the judge. They give me the performance I like and I have 228 apps running on my phone. And if there is a pro or plus of these apps I have them. These are only the main apps and card for performance and control.
Wintec filemate mobile pro 16gb class 10 card
And some of my preferred apps some free some not.These are My preferred apps I'm NOT trying to promote anything or any one.
Superuser elite
Busybox pro
Root Explorer
Gscript
Launcherpro plus
Titanium Backup root pro
SD Speed Increase
JuiceDefender pro
3g watchdog pro
Battery Doctor pro
Barnacle Wifi tether pro
BWT is not in market http://szym.net/barnacle/
Wifi Manager pro
Android OS monitor
SystemPanel pro
Privacy Blocker pro
Extreme call blocker pro
XDA Premium App
Wtf you sure it will flash sony 2.3 official rom? Im not sure buddy.
Sent from my X10i using XDA Premium App
Just go back to 2.1 do a factory reset then do a Su Firmware update repair now save in xrecovery backup an when it comes out go back to 2.1 and there you go
you don't think that will work.
I guess we'll see i hope so looks good anyway
shahkam said:
Wtf you sure it will flash sony 2.3 official rom? Im not sure buddy.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
It won't flash 2.3, but unbranding to global generic 2.1.A.0.435 X10a will make sure you get the official 2.3.3 Gingerbread update directly from PC Companion or SEUS when available.
agentJBM said:
It won't flash 2.3, but unbranding to global generic 2.1.A.0.435 X10a will make sure you get the official 2.3.3 Gingerbread update directly from PC Companion or SEUS when available.
Click to expand...
Click to collapse
I thought so but if you do have a other rom it's a good thing to backup your stock Firmware to go back to.
Thanks
Patricks_book said:
I also have network settings for about 30 more countries so just ask in this forum and all post them.
ATT and MEdia Net, Rogers Settings are at the bottom of this post
but it’s a good thing to check all your settings and write them down before you start.
This stuff is for rooting and Flashtool
Also at the bottom of the post are the apps that work for me I can get 24 to 36 hours of normal use checking mail,news weather,calls,texting alot and Facebook. And about 18 hours of all the above an heavy web use downloads,videos and surfing and then some.
x10a ATT USA 2.1.updated-1
Wintec filemate mobile pro 16gb class 10 card
Benchmarks are 777ish per the Quadrant app pictures below set at 3072kb.
Also before “I” started I did a factory reset and did a SE updates/Pc companion update/repair ( And did a reboot “restarted” )So I started with a fresh up to date phone. Then followed the guides To the letter.
These guys now what there doing I have had no problems at all with my phone signals and operations are even better now but you be the judge.
This Firmware will get the Sony update for 2.3
X10a generic 2 1 A 0 435 with DualTouch already thanks to Bin4ry
Or your global generic Stock Firmware
Root install Xrecovery And then BACKUP Stock Firmware with Xrecovery
then Flash Firmware/Rom
[FLASHTOOL GUIDE] HOW TO for n00bies
Thank you
rendeiro2005,Bin4ry Senior Members for the Guides,Tools and Roms.
http://forum.xda-developers.com/showthread.php?t=928343
I use 2.8 if you are a noobie like me it works.
( [UPDATE 22/03/2011] Flashtool BETA version 0.2.9.1 )
Thank you
Bin4ry Senior Member and Androxyde Senior Member for the Guides,Tools and Roms.
And watch the video ( http://www.youtube.com/watch?v=B9_pFOxPJUY )
Thank you BluechipJ for the Video.
This video is old but the updated 2.8 flasher works fine you can root and all the stuff in it works fine. [UPDATE 22/03/2011] Flashtool BETA version 0.2.9.1.
Read the new forums for the new roms if you want something other then the 2.1.1updated
ALL WAYS RUN FLASHTOOL IN Administrator (right click app click run as Administrator) do not click open (on XP pro any way) but read the forums for your OS I’m sure it’s there. Be sure to check DATES and updates on forums
And this thread it has some good stuff.
http://forum.xda-developers.com/showthread.php?t=955703
Thank you DooMLoRD Senior Member For Guides,Tools and Roms.
ROOT FIRST check perm then Install xRecovery, then all rest. Read the forum on how to.
Also check ALL DATES on ALL Posts,roms an apps "software" you download. And use only Updated Stuff but be careful of Beta just check in the Forum for what works and what doesn’t also check back or better yet Subscribe to XDA and to THAT forum and Senior Member so you can keep up to date on your x10
Oh and the biggest thing to remember is to THANK ALL THESE GUYs. So cools have fun be patient and read all BEFORE you start.
DO NOT KILL APPs they will/may just restart again and kill battery power
If you want to stop an app use Titanium Backup freezer to see if there are any problems first.
Mobile network settings
You should also have a Network operator button. Settings/wireless & network/mobile networks/network operators/search networks. Also/search mode/select automatically.
and if that works click the one with the home/house on it that way your not roaming.
Also you can put as many APNs as you like but the default should always be your provider and if you make a mistake you can dismiss or just delete APN.
USA/some Canada Networks
Settings/Wireless & Networks/Mobile Networks/Network Mode/Click GSM only/Then Click middle button on phone/restart phone.
Some USA/European/Asian/Canada Networks
Settings/Wireless & Networks/Mobile Networks/Network Mode/Click GSM/WCDMA preferred/Then Click middle button on phone/restart phone.
European/Asian/Some Canada Networks
Settings/Wireless & Networks/Mobile Networks/Network Mode/Click WCDMA only/Then Click middle button on phone/restart phone
Go to Settings/Wireless&network settings/ Mobile network settings/Access point names/menu button on left of phone/new apn. Only change the setting that are described and are Case Sensitive leave all others as they are. After you put in the settings click the menu button on
(bottom left button on phone) and click save. Reboot phone may have to do it two times and wait a few between each boot to see if it worked.
USA
Operator: AT&T (3G,2g,Edge)
APN: wap.cingular
Username:[email protected]
Password:CINGULAR1
MMSC:http: //mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
Rogers APN (3G) Settings:
Operator: Rogers
APN: rogers-core-appl1.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
Operator: MEdia Net
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
MCC: 310
MNC: 410
APN type: defaul.supl
Name: MEdia Net MMS
APN: wap.cingular
Username: [email protected]
Password: CINGULAR1
MMSC: http//mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms
Only change the setting that are described and are Case Sensitive leave all others as they are.
Multi-Country
Operator: United Mobile ( roaming service)
APN: ulm.com
User name: umdata
Password: internet
Albania
Operator: Vonafone
APN: Twa
User Name: guest
Password: guest
Angola
Operator: Unitel
APN: internet.unitel.co.ao
User name: guest
Password: guest
Australia
Operator: Optus (2g)
GPRS APN: internet
Username: guest
Password: guest
DNS: 202.139.83.3, 192.65.91.129
SMTP Server: mail.optusnet.au
Operator: Optus (3g)
GPRS APN: connect
Username: guest
Password: guest
DNS: 202.139.83.3, 192.65.91.129
SMTP Server: mail.optusnet.com.au
Operator: Optus (3g prepay)
APN: preconnect
User Name: guest
Password: guest
DNS: 202.139.83.3, 192.65.91.129
SMTP Server: mail.optusnet.com.au
Operater: Telstra (2g)
APN: testra.internet
User Name: guest
Password: guest
DNS: 203.50.2.71,139.130.4.4
SMTP Server: mail.bigpond.com
Operater: Telstra (3g data bundles)
APN: testra.datapack
Password: Talstra
DNS: 203.50.2.71,139.130.4.4
SMTP Server: mail.bigpond.com
Operater: Telstra (3g pay by time)
APN: testra.pcpack
Password: Talstra
DNS: 203.50.2.71,139.130.4.4
SMTP Server: mail.bigpond.com
Operater: Telstra (3g prepay)
APN: testra.wap
Password: Telstra
DNS: 203.50.2.71,139.130.4.4
SMTP Server: mail.bigpond.com
Operator: Telstra
GPRS APN: telstra.internet
DNS: 139.130.4.4, 203.50.170.2
Operator: Three (contract)
GPRS APN: 3netaccess
Username: guest
Password: guest
DNS: 202.124.68.130, 202.124.76.66
SMTP Server: smtp.three.com.au
Operator: Three (prepay)
GPRS APN: 3netaccess
Username: guest
Password: guest
DNS: 202.124.68.130, 202.124.76.66
SMTP Server: smtp.three.com.au
Operator: Three
GPRS APN: 3netaccess
Username: a
Password: a
DNS: 202.124.68.130, 202.124.76.66
Operator: Virgin Mobile
APN: VIRGININTERNET
User Name: guest
Password: guest
Dns: 61.88.88.88
Operator: Vodafone
GPRS APN: vfinternet.au
DNS: 192.189.54.33, 210.80.58
SMTP Server: smtp.vodafone.net.au
Go to Settings/Wireless&network settings/ Mobile network settings/Access point names/menu button on left of phone/new apn. Only change the setting that are described and are Case Sensitive leave all others as they are. After you put in the settings click the menu button on
(bottom left button on phone) and click save. Reboot phone may have to do it two times and wait a few between each boot to see if it worked.
X10a Codes
How toTurn off all Call Forwarding not ( voicemail or caller ID ) on ATT network. #002# in dial pad and press call. This works in USA and ?.
You have to do this every time you check call forwarding settings for it to work all the time because every time you check the button it resets back to default which is on.
X10 Test mode
From the unlock screen, do not unlock but press
1.6
Menu Back Back Menu
Back Menu Menu Back
2.1
Home Back Back Home
Back Home Home Back
Phone/battery/Usage info: *#*#4636#*#*
IMEI number: *#06#
Software version: *#8377466#
Be careful with this one it may or may NOT work
AGAIN BE CAREFUL WITH SOME CODES I'M NOT RESPONSIBLE IF YOU PUT IN THE WRONG CODES OR THEY DO NOT WORK ON YOUR PHONE
Information about SIMLOCK:
Enter to phone menu without SimCard - after Wrong PIN: press NO:
* * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
___________________________________________________________________
My preferred apps but you be the judge. They give me the performance I like and I have 228 apps running on my phone. And if there is a pro or plus of these apps I have them. These are only the main apps and card for performance and control.
Wintec filemate mobile pro 16gb class 10 card
And some of my preferred apps some free some not.These are My preferred apps I'm NOT trying to promote anything or any one.
Superuser elite
Busybox pro
Root Explorer
Gscript
Launcherpro plus
Titanium Backup root pro
SD Speed Increase
JuiceDefender pro
3g watchdog pro
Battery Doctor pro
Barnacle Wifi tether pro
BWT is not in market http://szym.net/barnacle/
Wifi Manager pro
Android OS monitor
SystemPanel pro
Privacy Blocker pro
Extreme call blocker pro
XDA Premium App
Click to expand...
Click to collapse
More settings
I have just recently arrived in Sao Paulo and have puchased a SIM card for my phone (TIM)
Phone works fine but no internet. My Portugese is not the greatest so I'm hoping someone can help me out. Maybe its something to do with my settings. My access point settings are as follows:
Name: TIM connect
APN: timbrasil.br
Proxy: -
Port: -
Username: xxxxx
Password: xxxxx
Server: -
MMSC: htt//mms.tim.br
MMS port: 8080
MCC: 724
MNC: 03
AUthentification type: PAP
APN type: internet and mms
not even sure if this is where to start. All was working fine in NZ...
Any ideas???
If you bought a Tim Brasil sim, then i guess you must change the apn settings according to your new network. Doesn't Tim provide a method of setting the apn automatically or info on their official brasilian site on how to set up apn manually ? You must verify if you have the correct settings
Deli23 said:
I have just recently arrived in Sao Paulo and have puchased a SIM card for my phone (TIM)
Phone works fine but no internet. My Portugese is not the greatest so I'm hoping someone can help me out. Maybe its something to do with my settings. My access point settings are as follows:
Name: TIM connect
APN: timbrasil.br
Proxy: -
Port: -
Username: xxxxx
Password: xxxxx
Server: -
MMSC: htt//mms.tim.br
MMS port: 8080
MCC: 724
MNC: 03
AUthentification type: PAP
APN type: internet and mms
not even sure if this is where to start. All was working fine in NZ...
Any ideas???
Click to expand...
Click to collapse
ïf you have wifi, for a second, you may wanna try the "APN Brasil" app in the Market.
I've installed the Wolf ROM it was a success, but when I try to connect my 3G it doesn't appear the icon of signal.
Does anyone knows what's the problem??
PS: Srry for my bad english
Att.
you need to insert the correct APN's for the device in the Wireless and Networks area in the settings
correct APN's are
Name: Media Net
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
**Password: CINGULAR1
Server: localhost
MMSC: mmsc.cingular.com
MMS Proxy: 66.209.011.032
MMS Port: [blank]
MCC: 310
MNC: 410
APN type: <not set>
**Password is case sensitive
424aca said:
you need to insert the correct APN's for the device in the Wireless and Networks area in the settings
correct APN's are
Name: Media Net
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
**Password: CINGULAR1
Server: localhost
MMSC: mmsc.cingular.com
MMS Proxy: 66.209.011.032
MMS Port: [blank]
MCC: 310
MNC: 410
APN type: <not set>
**Password is case sensitive
Click to expand...
Click to collapse
Sorry?!
The APN's depend on your provider, isn't it?
To get YOUR correct APN you go to SYSTEM SETTING- > Sony Ericsson->Download settings.
Btw. How can you know that the settings you give will work for pha_el? He did not share anything personal, no country, no provider ... nothing.
Don't take it as offence. I'm just curious.
pha_el said:
I've installed the Wolf ROM it was a success, but when I try to connect my 3G it doesn't appear the icon of signal.
Does anyone knows what's the problem??
PS: Srry for my bad english
Att.
Click to expand...
Click to collapse
LOL at the title- Wolf ROM 3G fail lol
If you can't connect to it, flash stock rom and tweak it yourself.
Your phone would be better than ever!
Try another rom..then.
Sec, will give u link.
http://forum.xda-developers.com/showthread.php?t=1238402
he wrote
ATT
Check your APN settings. It could also be a problem with your network and not related to the rom.
The same thing happened to me,I tired everything and even called my carrier.
For me I has to select WCDMA only under the network settings. I did all the APN crap and stuff and it was the simple thing of clicking WCDMA. Hopefully thats your problem
I've been using Wolfs GB rom since v3, am now on v5 and have not had an issue with 3g yet. My suggestion, wipe everything and reflash the rom.
Please Kindly Help Me...
After i upgrade my xperia x10 to android 2.3, the mobile own internet stopped working...as in i can't go my market, whatsapp, facebook and etc...but the internet browser is still working...any1 faced this problem? and any solutions?? currently very depress =(( and sorry for my poor eng and grammar...
kindlyhelpme said:
Please Kindly Help Me...
After i upgrade my xperia x10 to android 2.3, the mobile own internet stopped working...as in i can't go my market, whatsapp, facebook and etc...but the internet browser is still working...any1 faced this problem? and any solutions?? currently very depress =(( and sorry for my poor eng and grammar...
Click to expand...
Click to collapse
Did you sign on your gmail account? Go to settings>Sony Ericsson>Download Internet and mms settings and use that to get your internet profile back.
i tried alr...still not working =X anyway thanks for the suggestion =D
~~anymore suggestions?? nid help~~=/
manually check your APN settings
kindlyhelpme said:
Please Kindly Help Me...
After i upgrade my xperia x10 to android 2.3, the mobile own internet stopped working...as in i can't go my market, whatsapp, facebook and etc...but the internet browser is still working...any1 faced this problem? and any solutions?? currently very depress =(( and sorry for my poor eng and grammar...
Click to expand...
Click to collapse
If the above solutions do not work for you then a bit more iformation from you will help us to help you.
Firstly, which ROM are you using? Stock ROM or a custom ROM, if so which one?
Are you using a custom kernel or stock?
gregbradley said:
If the above solutions do not work for you then a bit more iformation from you will help us to help you.
Firstly, which ROM are you using? Stock ROM or a custom ROM, if so which one?
Are you using a custom kernel or stock?
Click to expand...
Click to collapse
how to check ROM? i kinda new to this...sorry~ anyway my Kernel Version is 2.6.29-00054-g5f01537
[email protected]#1
Baseband version 2.1.71
build number 3.0.1.G.0.75
Android Version 2.3.3
Model number X10i
i just list out all the info i can find on my phone...hope this can help...
DaveHTC200 said:
manually check your APN settings
Click to expand...
Click to collapse
My APN settings is empty....=S
kindlyhelpme said:
My APN settings is empty....=S
Click to expand...
Click to collapse
Which country and network provider are you? You may need to enter your apn settings manually, that's why your internet isn't working, no apn settings.
Dark Nightmare said:
Which country and network provider are you? You may need to enter your apn settings manually, that's why your internet isn't working, no apn settings.
Click to expand...
Click to collapse
i live in Brunei Darussalam~ =X network provider is DST...Don't think u guys know where is it...its a small tiny dot on the world map =S
kindlyhelpme said:
i live in Brunei Darussalam~ =X network provider is DST...Don't think u guys know where is it...its a small tiny dot on the world map =S
Click to expand...
Click to collapse
- Press Main
- Select Settings
- Select Wireless and Networks
- Select Mobile Networks
- Select Access point Names
- Delete all APN's in this section.
- Press Menu
- Press New APN
- Enter the follow settings one for General Data . The other for MMS
Name: BN - DSTcom Web
APN: dst.internet
Proxy:
Port:
Username: dst.internet
Password: internet
Server:
MMSC:
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: default, supl
PXT Messaging MMS:
Name: BN - DSTcom MMS
APN:
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: mms
Dark Nightmare said:
- Press Main
- Select Settings
- Select Wireless and Networks
- Select Mobile Networks
- Select Access point Names
- Delete all APN's in this section.
- Press Menu
- Press New APN
- Enter the follow settings one for General Data . The other for MMS
Name: BN - DSTcom Web
APN: dst.internet
Proxy:
Port:
Username: dst.internet
Password: internet
Server:
MMSC:
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: default, supl
PXT Messaging MMS:
Name: BN - DSTcom MMS
APN:
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: mms
Click to expand...
Click to collapse
OMG OMG OMG OMG OMG DUDE YOU ARE SOO AWESOME!!! how did u get all those info of my country!! U R SO AWESOME!! OMG !! REALLY REALLY THANK YOU!! THANKSSSSSSSS YOU'RE THE BEST =DDDDDD
kindlyhelpme said:
OMG OMG OMG OMG OMG DUDE YOU ARE SOO AWESOME!!! how did u get all those info of my country!! U R SO AWESOME!! OMG !! REALLY REALLY THANK YOU!! THANKSSSSSSSS YOU'RE THE BEST =DDDDDD
Click to expand...
Click to collapse
i am in us with at&t how do i get mine to work please????
---------- Post added at 12:56 AM ---------- Previous post was at 12:26 AM ----------
- Press Main
- Select Settings
- Select Wireless and Networks
- Select Mobile Networks
- Select Access point Names
- Delete all APN's in this section.
- Press Menu
- Press New APN
- Enter the follow settings one for General Data . The other for MMS
Name: BN - DSTcom Web
APN: dst.internet
Proxy:
Port:
Username: dst.internet
Password: internet
Server:
MMSC:
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: default, supl
PXT Messaging MMS:
Name: BN - DSTcom MMS
APN:
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: mms
condukta said:
i am in us with at&t how do i get mine to work please????
Click to expand...
Click to collapse