I was quickly able to activate my Samsung Vitality (Gingerbread 2.3.4) to Page Plus with some limitations to MMS and default browser and stable 3G. After two weeks of reading every post I could find, I decided I should ask here !
1. The ##Data# does not do anything so I am unable to edit the default "Cricket" internet/MMS settings and apply the Page Plus settings. This causes issues with the default browser... it doesn't work and with MMS message sending. I have been able to overcome the MMS issue by apply a Page Plus APN, but it doesn't correct the browser. Does anyone know how I can get into the ##DATA# mode ?
2. I use QPST to change the settings necessary for Page Plus including the latest 3G PRL. 1x is solid as a rock, but 3G comes up, sometimes I can get a single web page to load then it drops ... within a few min. it will drop again... any idea on this ? (I am trying to be brief so if you want my QPST/PRL info please ask and I will provide.
3. I know Samsung had a "generic" update to 2.3.6, but it is no longer showing as available for download .. does anyone have the update available for download ?
Thanks in advance
Flash at your own risk.
http://openzio.rtrnetwork.com/openzio/openvitality/GCDMA_ACG_R720_Admire_EJ26_SimpleDL.exe
Spz0 said:
Flash at your own risk.
I assume this is the 2.3.6 update and I installed the program on my desktop. However, when I start the upgrade process .. it tells me to hold the following keys ; "camera key,USB cable". Not sure what this means. I assume the camera key is the key configured for the muve music launcher presently, but .. for the usb... scratching my head . I assume I need to use a key sequence to get into the correct mode.. can you tell me what that is? Really appreciate your reply.
I figured it out -- hold camera key while plugging in usb cable !
Click to expand...
Click to collapse
Turn your phone OFF
Pull Battery
Re-insert Battery
Hold down Camera button (MUVE) while pluggin in USB cable.
Hit Vol. up to select download mode.
Thanks ! I successfully updated to the 2.3.6. Unfortunately, I still have the problem with 3G, browser, mms msg and now with the Google Play Store. Steps taken -Used one click root to get root back, activated via *228, updated PRL, checked settings in QPST, identical as they were before.
1. Using same method as before to enable mms. I go into airplane mode, delete apn and load the pageplus apn via apn backup & restore app. Then MMS works. Do I need a special MMS.apk for page plus ?
2. Stock browser, dolphin both still have same issue on data (not wifi), connection error on any url load - Opera mini works in socket mode but has same problem if changed to http.
3. 3G has same symptom, it will reflect 3G in hybrid mode and in EVDO mode, but drops out comes back, drops out and cannot load web pages etc.. in CDMA mode only, have solid 1x like before and 1x speeds.
4. New problem, Google Play Store unable to connect unless I use marketaccess.apk to manually set to Verizon 310004 and emulate on boot. I expected the upgrade from market to google play to eliminate the need for me to continue to emulate the provider I am on in the US.
Thanks again !
Update
Update on browser issue. I called Page Plus .. told them I was using a "motorola Citrus" even tho they know I'm not, the rep looked at my settings and said hang on there are a couple of features that could be enable.. 5 minutes later I reactivated and the stock browser works. I wish I could tell you what features on my account they enabled, but they did not tell me. Prior to this my only browse ability was thru Opera Mini configured in socket mode... like I said .. http would not work. I assume they default "unknown" phones to WAP. So if you have a smartphone and are having problems with browsing with stock browser ...
This did not fix the APN issue. I still must use the pageplus apn file and restore it after every reboot or I cannot send MMS messages ...I have provided what is default on my phone ... after activation ? vs. what I enable to get MMS to work
3G - Same issue .. it will not stay connected in hybrid or evdo only mode
Market- Same issue I must use market enabler to emulate the US carrier code I am on after every reload .. the "emulate on boot feature" does not work !
As a side comment .. this is my 14th time attempting to correctly enter the different "spam protection code" ...
Does anyone have links to these files for the sch-r720?
Related
I have been trying for quite some time to get the pesky little 'Internet Calling' option to show up on my Touch Pro. I've tried all sorts of little utilities on various different ROMs and I've yet to see my VOIP provider show up as an option to dial out on, or even any change when 'Internet Calling' is configured and enabled on the Home screen.
There seems to be lots of (possibly outdated?) info out there and there is no shortage of utilities that are supposed to enable the feature, but as far as I can tell none of them seem to work on this particular phone.
I would like to have SIP enabled on my phone, and I would like it to use the same dialing pad, contact database and phone program that the phone on the device uses. I don't want a seperate application, I just want the phone to be able to dial out and recieve calls via VOIP over WIFI, and I want the bluetooth headset to work properly with it and I want clean audio in both directions with a good WiFi connection. Support for multiple SIP accounts would be a huge bonus as well. Is this asking too much or is it just not possible with this device?
I am aware of and do have Fring and Skype both working on the phone, but they do not share the same features as the standard phone application that is native to the device, the biggest issue is that if the phone goes to sleep I don't get calls, even if I'm sitting in my office with a perfectly good wifi connection.
Is there a ROM out there that has VOIP enabled where you can just set up your provider and it works? Has anyone had any success on this phone getting VOIP to work natively? If not a thread that basically says no, it doesn't work might help others that are fighting with this issue.
Thanks in advance.
I had never heard of this as even being possible in WM
Go to registry "Features" under HKEY_CURRENT_USER\ControlPanel\Phone,
and add 8 Hex to the value.
Thanks to beefviper on ppcgeeks who figured this out.
Original info here: http://forum.ppcgeeks.com/showpost.php?p=749746&postcount=5
If anyone else has more info on CDMA & SIP I'm interested, because it seems like I can't get all pieces working together at once. Either the GPS is broken, or the microphone is muted. Fix one, break the other.
This worked for me!!!!
Just going to reflash and see if I can get it all working without all of teh extra hacking around and will report back.
bluenote73 said:
Go to registry "Features" under HKEY_CURRENT_USER\ControlPanel\Phone,
and add 8 Hex to the value.
Thanks to beefviper on ppcgeeks who figured this out.
Original info here: http://forum.ppcgeeks.com/showpost.php?p=749746&postcount=5
If anyone else has more info on CDMA & SIP I'm interested, because it seems like I can't get all pieces working together at once. Either the GPS is broken, or the microphone is muted. Fix one, break the other.
Click to expand...
Click to collapse
bluenote73 said:
If anyone else has more info on CDMA & SIP I'm interested, because it seems like I can't get all pieces working together at once. Either the GPS is broken, or the microphone is muted. Fix one, break the other.
Click to expand...
Click to collapse
Here is what I did after you posted the missing link:
1. Reloaded my phone with the latest NSFAN ROM.
2. Set up the phone to connect to my wireless network. Turned the phone and data connection feature off (my phone is not provisioned)
3. Installed WM6VoIPFull.cab - restarted phone as suggested.
4. Installed Setup_Voip-v0.3.cab
5. Ran Sip Config Tool V2.0.1
6. Ran Sip Dialplan - soft reset as suggested
7. Ran Setup VoIP and set Outgoing calls using VoIP to 'Whenever Available' in the options tab
8. Added 8 to the Hex value at the reg key you noted. Restarted the device.
9. Enabled the Internet Calling on the Settings/Home/Items option
Saw that the VoIP was saying No service. Confirmed connection settings were correct but could not see the phone hitting the PBX at all.
Re-installed WM6VoIPFull.cab, rebooted, re-enabled whenever available... swore some more... Home item says no service. Reconfirmed that the PBX works with settings I'm using with softphone on PC. Made sure I could get to Google Maps on phone. WiFi is working and DNS is resolving, account parameters are all good... still no service. Phone isn't even attempting to log onto PBX.
Whet back to this thread on another site - http://forum.ppcgeeks.com/showthread.php?p=1610281
And performed the regedits and added thescripts in post #9 (Cudos to 'El Ha$on')
So I am able to easily turn VoIP on and off....
Try random things to try to get it to magically work again. No Joy. Just for kicks try turning the phone on, and I get a notification that says 'home only' - no clue what that means.
Confirmed that the connection is set to whenever available tried togelling the use over the phones data connection, rebooted. Still 'No Service'
Can't figure out why the phone doesn't want to connect through my wifi, throw phone across room against the wall and go to bed.
- UPDATE -
The above method DOES work, however there is another issue. Microsoft uses a different set of protocols for SIP authentication, so if you are attempting to connect to a PBX that does not support the Authentication that the phone is offering up, you are likely geting 401 errors.
I can connect the phone directly to my trunk lines without any trouble now using the above method.
Installing audioroute routes the audio to the earpiece of the phone and the volume that I am getting is sufficient, allthough not particularly loud.
Happy Voiping
Glad to hear you got everything working. Could you post a link to where you got the voip package you actually used?
Sure thing, I used the files from thread number 8 from here:
http://forum.ppcgeeks.com/showthread.php?p=1610281
Does your GPS work with all this installed, and have you confirmed that your mic is transmitting your voice? When I was first testing, I didn't even think to check that people could hear me. (Because I was calling one of those automated response places).
Thanks for the link, I think I might take a bit to work up the energy to try yet another combination
Yes GPS is working and VoIP is fully functional. Last piece of teh puzzle is to get the Wifi to remain always on.
(and get it to Authenticate with freeswitch)
Touch Pro CDMA and VOIP
I currently use an HTC Touch Pro to dial out through my WiFi router on a phone that is not active with any cell provider. I am able to do this with an older version of Skype software. When I tried updating to the latest version of Skype software it would not work. I am not able to receive calls on it yet, but I believe I will be able to trick the interface into receiving calls through the Internet the same way my computer does.
Wifi: no stand by / always on
hammtech said:
Last piece of teh puzzle is to get the Wifi to remain always on.
Click to expand...
Click to collapse
Fetch WifiNoStandby.cab from forum.xda-developers.com/showthread.php?t=730303
I just got myself the HTC Tattoo and am a bit confused on the Android Market. From what I am reading, it appears that Android Market REQUIRES that your phone have a data plan or at least have it provisioned (pay per use). I am stuck because my sim chip has been locked from having any data use. I am on a business account so have no ability to call ATT and have them re-provision my sim.
I know my wifi works, and am able to download from other sites that provide apk's directly. But is there any wifi workaround so I can access Android market?
Lastly, I am not really all that interested in anything except this one program my brother uses on his iphone called "supercam." We have a q-see DVR system in our business and supercam is the only program available that can interface with it. This is freeware so if anyone has the apk available, I would love it if you could email it to me.
Or if someone can instruct me on a way to access Android Market via wifi only, that would also be supremely appreciated!
Marketplace over Wifi works for me. Maybe your Phone is locked somehow by your vendor.
I only use wifi to access Market.
You could search on google for supercam apk.
Did you even try to go to the market with wifi turned on?
I have been able to access Market through Wi-Fi since day 1 without any problem. Don't see any reason why you can't.
Hey - I just searched the andorid market via the tattoo for supercam and there is no such app - chances are even if you got into market place via wifi you still would not get hold of this app.
Try googling slideme on your PC - some marketplace programs there to download and transfer to your phone (the old fashioned way)
This phone issue seems to be common. When I looked it up, a lot of people with the Tattoo said they had to do a hard reset because apparently, if you skip the initial boot screen asking you to enter your Google login information, you will not be able to set it up after. Just an infinite loop problem where it says "unable to establish reliable connection to server or your sim is not data provisioned. please call customer care if this persists."
I'd like to avoid a hard reset if possible. I have tried to access market using wifi only, have tried it with wifi on and no sim chip inserted, have disabled all default APN, and a few other things. My browser works fine in all instances - market just keeps giving me that same error message that I wrote above.
For reference, I am using an unlocked HTC Tattoo that was purchased retail box. This was not a carrier provided phone so there should be no issue with carrier locks and such.
For the time being, I have tried using the SDK as an emulator on my desktop to access Android Market directly but through that, I have not been able to figure out how to save the APK's onto my computer. At the same time, I too did try looking up Supercam and did not see it - I thought it had to do with my screen resolution incompatibility (I heard android market only shows apps compatible with your screen resolution and hardware requirements). But if you go to google and type in "android supercam" the first link is from androlib and is the program I am looking for. However, all the QR codes send me straight to Android Market - that's assuming I was able to even get the QR reader working the first time around.
Suggestions?
I would suggest you to make Market work even if that means you need to reset your phone cos you might need some other apps in the future and that is the easiest way to install them as you see.
You could also use some other sim card, even prepaid that works with 3g to get smartcam from the market. But if people say that it is not available for Tattoo that won't help you. I was able to find smartcam with my rooted Tattoo but I also have hacked Marker app installed.
For now I think your only solution could be to find someone with some other Android phone to download it for you, then he should back it up with Astro file manager and transfer it to your phone. You could do the same thing with emulator.
Sent from my HTC Tattoo using the XDA mobile application powered by Tapatalk
lukic said:
You could also use some other sim card, even prepaid that works with 3g to get smartcam from the market. But if people say that it is not available for Tattoo that won't help you. I was able to find smartcam with my rooted Tattoo but I also have hacked Marker app installed.
Sent from my HTC Tattoo using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Smartcam - is that a typo or a different app entirely? If that has support for the Q-See DVR's, that might work too. For now, I am waiting for my pre-paid 3G card. But then again, if my device still needs a hard reset, blah. But yeah, I do need access to the market. One of these days when I get my day off. Or maybe if and when 2.1 comes out for Tattoo. I heard that was announced a month ago but then heard it got retracted. Any news on that end?
It was a typo. I was talking about supercam.
There were a lot of news about Android 2.1 on Tattoo, but I didn't see any in about a month now. Last thing I heard there won't be official 2.1 release for Tattoo. But we can definitely expect community release very soon.
lukic said:
It was a typo. I was talking about supercam.
There were a lot of news about Android 2.1 on Tattoo, but I didn't see any in about a month now. Last thing I heard there won't be official 2.1 release for Tattoo. But we can definitely expect community release very soon.
Click to expand...
Click to collapse
I've always done a lot of firmware updates with all my various devices but should there be a community release, what should I expect when I do the flash? Do I my sense UI or any other functionality for the original Android interface?
dont rule out an official update yet - it has neither been confirmed or denied officially
I think there will be an update in the next 6 months
roflmao 6 months thats like 5 years in the mobile space
elmargol said:
roflmao 6 months thats like 5 years in the mobile space
Click to expand...
Click to collapse
Ha ha - you are right - we will probably have new handets by then!
FINALLY.
I got it working. What many of us seem to be missing is after setting up the APN, you have to restart the phone at least once so the sim is properly provisioned for data access. These are the correct settings for AT&T (gophone or postpaid):
Name: AT&T
APN: wap.cingular
proxy: none
port: none
username: [email protected]
password: CINGULAR1 (case sensitive)
Server: none
MMSC: mmsc . cingular . com
MMS Proxy: wireless . cingular . com (without the spaces - forum won't let me post links)
MMS Port: 80
MCC: 310
MNC: 410
APN Type: none
In addition, YES, a hard reset is necessary - the Tattoo only likes to take your google account information on that initial boot. I had to reset twice because the first time around, I skipped the account setup and could not get it working even with the 3G mobile network enabled. During the initial boot, I did not have time to setup the wifi so cannot confirm if you need to use the data line portion of your sim to initiate contact Android market to get your google account setup.
After getting things setup the first time around, it works flawlessly on wifi with my blocked GPRS sim card.
$10 for the sim + 1MB of data to get my access to android market - man. Anyway, if anyone can confirm that the hard reset trick with mobile network off and wifi will still allow you to setup your google account for android market, that would be great!
Hi everyone ,
i'm glad to be here.
I had the same problem , my Tattoo can't connect to Google service , so i did a Hard Reset , and now everything work fine for me .
Whenever I try to navigate somewhere or look up an address on google maps. my internet just stops working and I either have to reboot or go into airplane mode and come out. any others with this problem??
I have a vague memory of experiencing this before on another device. I think the problem was due to improper APN settings. If you go to you're APN list and you select one, scrolling all the way down you'll find 'APN type' . that tells the device what to use each APN for.
Currently on my sgsii I have 2 APNs, one for internet (named ATT PHONE), the other for mms & supl (named ATT WAP). Btw supl is what is used for aGPS. Check your APN settings with what they're supposed to be, correct ones can be found on att's site, see if the fixes it. You could also reset them to default.
Sent from my SAMSUNG-SGH-I777 using xda premium
cishos said:
Whenever I try to navigate somewhere or look up an address on google maps. my internet just stops working and I either have to reboot or go into airplane mode and come out. any others with this problem??
Click to expand...
Click to collapse
I had this same issue when running serendepity 8.1. I also suffered the notorious MMS bug and I concluded that it had something to do with the APN's. I tried everything to get it to work and nothing. I wound up going back to cognition and it works fine again.
Hi to all, I recently bought a Cherry Mobile Fusion Bolt(rebranded Ainol Novo 7 Venus/Myth) here in the Philippines, and I have been having some issues with saving APN. Funny enough saving APN worked first time I used my Huawei E1552 Usb modem(after dissabling the cdrom and sd card), but after this I can't save APN and the list is empty. I read hundreds of pages on the net and here and tried most suggestions, with a few differences:
I'm on original ROM, and don't want to flash to another one,because this is the only problem I have, everything else is working.
I live in the Philippines and not SA or US. 4 months a year I live in Denmark.
First time I tried the modem were working with PPPwidget - but not after the new version came out, then I tried disabling the cdrom and SD card via putty on my pc,then the modem worked fine. I needed the cdrom in order to re-install drives on my pc so had to reset it to factory defaults, and when finished then again disabling the cdrom and SD card, and then the APN problem started.
I have downloaded allmost all PPP, UMTS, 3G, APN, System tuner, Tweakker, Toolbox, there is on the Play store and on the net and used market enabler when something was incompatible with my Tab. Nothing seem to be able to give me the APN back. It seems like the APN is locked somehow.
This is a rooted device, from manufacturer, only thing missing when I got it were SU, so I installed Superuser from ChainsDD, but later read that SuperSU fron Chainfire were better and uninstalled Superuser via Play store, then installed SuperSU and rebooted.
Android 4.1.1 JB Kernel 3.4.0+ Build number Cherry_A610_V2
1Ghz A9 Quadcore ATM7029 Cpu
GC1000 QuadCore Gpu
7" HD IPS 5pt. Capacitive touch panel WXGA 1280x800
Micro SD slot for card up to 32GB
8GB Nand Flash instead of 16GB
1GB Ram
Wifi
Micro USB 2.0
VGA front camera, 2MP back camera
Super HD 2160p
4000mAh battery
3G support through dongle
OTG but cable not supplied by Cherry Mobile(you can buy it in CDR-King for 60 pesos).
Cherry Mobile has NO support for this model on their homepage, funny since all their shops are out of stock with this model. I had to buy mine from a different shop. Ainol is even worse since their site is chinese only, can be used through Google translate, but then the search function doesn't work and you have to read through many pages and not finding anything.
When I start the Tab, attach the modem I get signal bar in notification, but "No internet connection", then I go to Mobile Networks> APN and its empty. Then I go to search for Operator and it finds Globe PH Prepaid, i chose that but nothing happens APN is still empty.
Then I try manually to set the APN, I just copy the info from my Samsung Galaxy Ace Plus, and then hit menu button to click the Save button, but this is were things go wrong - there is no save button, actually when I hit menu button, the screen changes to APN list and its still empty. I also tried to just hit the back button, same result.
I tried getting Tweakker from Play store, to automatically set the APN, but after the APN list is still empty.
I Tried APN backup & restore, backing up then restore, still empty. Doing the same thing then restart, stil empty. Removing all apps that had anything to do with APN or 3G modem and clear all data for them. Try above again, still empty.
Try my modem in my pc - works fine. Reset it again to factory defaults - works fine. Update firmware so I now also have phone and MMS - works fine. then disabling cdrom and SD card - try with PPP widget - not working. Then changing the dailup number, save, try dailing - hung. Then changing it back to the correct *99***1# - now working but still only browsing works. Ok decided to update PPPwidget to newest one - now not working. Switched back to old version I found on the net - still not working. Read on the the homepage of PPPwidget that the desired options I like besides browsing(TXT, MMS, Phone, Downloading from Play store) might not be available since the JB don't see the connection only some browsers do. OK uninstalled PPPWidget to try and get it set up manually like in the start, again not working.
Starting over from scratch(not resetting though - tried that on another "Chinese" tab and had chinese menues(ARRRGH)).
I'm back to the point that the APN list is still empty.
So my questions are simple:
Could it be that the list of the APN is locked somehow and thats why I can't add APN's?
Could it be that one of these wonderfull App's has deleted some system file?
Could it be that the APN list is read only, and only write for admin, where the Tablet thinks I'm not.
Could it be a general JB problem - I have read hundreds of similar stories on the net - all with different Tab's some with phones?
Any suggestions on what I can use - APN manager free is no longer available from Play store, and the Pro version is said to have major problems with JB.
Hope someone can help
With kind regards
JBJ
PS. Please take this serious and not as a thread to make fun of the OP.
Nothing??
Seriously?????
Nobody has a solution?
Never mind, the tab died after 4 months use. In order go bring to Warranty repair it would cost additional 3000 pesos, because Cherry Mobile don't accept delivery by courier service - only original owner, the name on the receipt.
I want to warn people not to buy Cherry Mobile gadgets if they live far from service center - unless they don't care about the warranty.
I tried to changed APN manually to rogers but still data does not work, only call and text works. Is there a solution to this? I believe i got Pro 2 (cn with global rom installed)
I had the same issue, below is the APN setting on Rogers website, I've found that if you make the following changes, it will connect to 4G data (until you restart your device)APN Type: replace "internet + mms" with "*"
MVNO: ROGERS
MVNO type: SPN
This will get you connected.
However, I ran into another problem after configuring the network this way. After restarting the device, the phone can no longer detect the SIM card, and has an error message prompting restart).
This is my problem after restarting:
Comparing with other phones, the auto detected APN Type is typically "default", but entering default will cause the connection issue right away. The "*" will allow you to run until device reboot.
I too would like help on how to resolve this. Seems more software than hardware problem since it only fails after boot.
Mobile APN Settings
Parameter NameParameter ValueAPNltemobile.apnMMSC
http://mms.gprs.rogers.com
MMS Proxymmsproxy.rogers.comMMS Port80APN Typeinternet + mmsAPN ProtocolIPv4/IPv6APN Roaming ProtocolIPv4/IPv6All other settingsBlank/default value
@GSKC
I just tried your method looks like it works and as you said it doesn't work after reboot. However when I did "Network setting reset," I was able to connect to 4g again (but resets wifi passwords too). Hopefully there's a solution...
I noticed that this problem only happens if there is a SAVED wifi network WHEN the device BOOT up.
I did a factory reset, then enter the APN manually. I was able to connect to stable network.
I did a system restart, no issue. The phone reconnects to the network automatically after booting.
I connect to a wifi network. The phone still works fine.
I restart the device again, the problem comes back.
If I take out the SIM and only use the Wifi, the phone is also okay.
The only time when it doesn't work is when I have both, which is the normal use case.
Something is happening in the firmware between the wifi and the SIM during the boot sequence.
This problem exists on my Lenovo L70081, Legion Phone Duel 2 Pro, running OS 12.5.188 ST, updated using Rescue and Smart Assistant v5.8.0.25
Any help would be appreciated.
GKSC said:
I noticed that this problem only happens if there is a SAVED wifi network WHEN the device BOOT up.
I did a factory reset, then enter the APN manually. I was able to connect to stable network.
I did a system restart, no issue. The phone reconnects to the network automatically after booting.
I connect to a wifi network. The phone still works fine.
I restart the device again, the problem comes back.
If I take out the SIM and only use the Wifi, the phone is also okay.
The only time when it doesn't work is when I have both, which is the normal use case.
Something is happening in the firmware between the wifi and the SIM during the boot sequence.
This problem exists on my Lenovo L70081, Legion Phone Duel 2 Pro, running OS 12.5.188 ST, updated using Rescue and Smart Assistant v5.8.0.25
Any help would be appreciated.
Click to expand...
Click to collapse
Im on the same OS version 12.5.188ST, my phone connected to data absolutely fine with no problems but after every few hours stop making or receiving calls. I did the following and its fine for some time now but I'm not sure whether this will work with every phone but no harm in trying :
settings.....cellular network and sim.....5G mode. By default (at least in my phone) it is on NSA, I first switched to NSA+SA but to no avail, than I switched to SA and vola problem solved, all incoming outgoing calls working bang on but I think now my phone doesn't go on 5g which is still not good but at least making calls as normal. Now, as I said, this procedure might not work for everyone but try it, cheers.
vtec303 said:
Im on the same OS version 12.5.188ST, my phone connected to data absolutely fine with no problems but after every few hours stop making or receiving calls. I did the following and its fine for some time now but I'm not sure whether this will work with every phone but no harm in trying :
settings.....cellular network and sim.....5G mode. By default (at least in my phone) it is on NSA, I first switched to NSA+SA but to no avail, than I switched to SA and vola problem solved, all incoming outgoing calls working bang on but I think now my phone doesn't go on 5g which is still not good but at least making calls as normal. Now, as I said, this procedure might not work for everyone but try it, cheers.
Click to expand...
Click to collapse
Thanks for the suggestion, unfortunately setting the 5G setting didn’t help. I also tried disabling 5G but I still have the issue.
Was your OS able to read the APN from your SIM or did you have to enter the APN manually also?
GKSC said:
Thanks for the suggestion, unfortunately setting the 5G setting didn’t help. I also tried disabling 5G but I still have the issue.
Was your OS able to read the APN from your SIM or did you have to enter the APN manually also?
Click to expand...
Click to collapse
I didn't mess about with apn, as I said in my earlier post I had no problems using data its always connected but I had problems with making and receiving calls, cheers
There's currently two ROM available on Rescue and Smart Assistant:
L70081_ROW_SECURE_USER_Q00017.0_R_ROW_12.5.188_ST_210819_qpst
L70081_EE_SECURE_USER_Q00017.0_R_ROW_12.5.137_ST_210710_sec_qpst
What's the difference between ROW and EE rom?
Which would work best in Canada and US?
is ROW only updated in Asia and Pacific?
i sort of had this same problem with Tmobile. it would only connect to 3g . if i connected to the 4g or 5g network i lost everything . i was able to fix it using my ROOTED phone and an app in the playstore called network guru. I used that to turn off majority of the network bands and only left the ones listed for the phone. My service was immediately fixed and havent had any trouble since
tinman4209333 said:
i sort of had this same problem with Tmobile. it would only connect to 3g . if i connected to the 4g or 5g network i lost everything . i was able to fix it using my ROOTED phone and an app in the playstore called network guru. I used that to turn off majority of the network bands and only left the ones listed for the phone. My service was immediately fixed and havent had any trouble since
Click to expand...
Click to collapse
Can you go into more detail and steps? I actually switched from tmobile to att after I couldn't get it work. I would rather be on tmobile.
superrama said:
Can you go into more detail and steps? I actually switched from tmobile to att after I couldn't get it work. I would rather be on tmobile.
Click to expand...
Click to collapse
I know how ya feel, I pestered TMobile for 2 weeks and they were no help. They kept trying to push me off to Lenovo who was absolutely no help at all. Id go thru their website which connects you to Motorola. Then they would tell me they don't support the phone because it's Lenovo and give me a link to follow. Id follow that link which led me right back to Motorola lmfao.
After 4-5 times of going thru that nonsense I finally got someone who knew what they were doing. They told me because this phone was never released in the US I need to go thru their European server for assistance. Screw that, I did some more research and got the idea of trying this from some ancient post I found on xda lol.
It's actually very easy as long as your phone is rooted. download the app, click the 3 dots and go into force control. Then adjust the carrier bands so only the ones supported by the phone are selected. Then reboot your phone and it should kick over to a working signal . If not ya might have to monkey around in the service menu using the dial code *#*#4636#*#*
Here's a few screenshots to give ya an idea and a link to a website with all the bands listed. https://www.kimovil.com/en/frequency-checker/US/lenovo-legion-2-pro
tinman4209333 said:
I know how ya feel, I pestered TMobile for 2 weeks and they were no help. They kept trying to push me off to Lenovo who was absolutely no help at all. Id go thru their website which connects you to Motorola. Then they would tell me they don't support the phone because it's Lenovo and give me a link to follow. Id follow that link which led me right back to Motorola lmfao.
After 4-5 times of going thru that nonsense I finally got someone who knew what they were doing. They told me because this phone was never released in the US I need to go thru their European server for assistance. Screw that, I did some more research and got the idea of trying this from some ancient post I found on xda lol.
It's actually very easy as long as your phone is rooted. download the app, click the 3 dots and go into force control. Then adjust the carrier bands so only the ones supported by the phone are selected. Then reboot your phone and it should kick over to a working signal . If not ya might have to monkey around in the service menu using the dial code *#*#4636#*#*
Here's a few screenshots to give ya an idea and a link to a website with all the bands listed. https://www.kimovil.com/en/frequency-checker/US/lenovo-legion-2-pro
Click to expand...
Click to collapse
How do you root the phone?
GKSC said:
How do you root the phone?
Click to expand...
Click to collapse
Tutorial: How to Update, Unlock bootloader and Root your CN with Global Rom phone
I received my phone today from Aliexpress and was able to update, unlock bootloader and root my phone so I want to share the steps. Follow them at your own risk, I take no responsibility for any issues or bricking. You should always backup your...
forum.xda-developers.com