hi can some one please help i want to root my att s3 but i cant get oden to stay on im useing widows 7 on a new pc ive tried my other lab top and it does the same thing no matter what version i try it does the same everything goes good untill i get the little box with the symbols on it that says open but it just flashes off can anybody help thanks
Related
hey I know there has been many threads about this but my case is unique and believe me i spent more than 6 hours searching the forums for a fix but no luck
I have a brand new Samsung Galaxy S2...tried to root it and it is stuck on boot loop
so i tried the steps written on the thread (do not post a new thread) but it is not working because i can not get inot recovery mode at all
I installed a stock xxki3 and still I can not fix the problem...
please help me
Can you post your device info.
Eg: I9100 international version
Sent from my GT-I9100 using XDA App
Yep, you're truly unique
Why not start with telling us your exact product and what happens when trying to get into both recovery and download modes.
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
mukalaaa said:
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
Click to expand...
Click to collapse
You need to download files to use for your specific phone and try again. You said you have a GT-I9100G, right? Well, where did you get the files you used to root?
You also said in the title of this post that you installed XXKI3. Well, installing XXKI3 and rooting are not the same thing. Which did you do? Root using an insecure kernel? Or install an XXKI3 firmware?
I'm going to go ahead and guess that you tried to flash a firmware intended for the regular GT-I9100, and not the GT-I9100G. These two phones have different hardware, so firmwares are NOT compatible.
Amirite?
first I tried to root it using insecure kernel...when it got stuck with galaxy s 2 logo screen with yellow triangle.... I searched all over the net for a solution and one of the solutions was is to flash xxki3 ....and I did that.... but it always fail.... I also tried to flash litening rom... but at the end...it fails at MODEM stage i believe....
Now all i want is to get my phone working....I dont wanna root it anymore....
please guys please help me
Stop flashing it.
You are doing more damage.
You have the 9100G, but you're flashing 9100 stuff
I am not flashing it anymore.... but I need a solution.... I want to know how can I get it back up and running
please help me
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
You could try flashing this kernel.
http://forum.xda-developers.com/showthread.php?t=1369977
Sent from my GT-I9100 using XDA App
mukalaaa said:
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
Click to expand...
Click to collapse
When you get the error, does it say failed red color? Of course not.
Tell us excactly the error you are getting! If you want our help give us all the information that you have.
What error message did you get? What are the steps you took?
I am upgrading currently, 1 hour has been passed, downloading completed in the PC and now a black screen is showing in Galaxy Ace saying “downloading…” . In PC, no download is running. I think it got stuck, until now still same nothing happen.
Im facing problem regarding the updating in Kies and keeps Blank Screen and keep saying Downloading… Please help?
I dont know if already done, almost 4hours stuck in the blank screen (downloading..) and nothing happen...
May I know if already Brick?
Please advise..
Thank you!
You should get rid of kies and flash your stock roms from odin if you dont know how just aks and i will tell u.
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
Hi! I need your help please! I was trying to downgrade my phone software, using odin, by installing a different kernel,
the problem is that it gave me an error, and now my phone doesnt work at all, it only turns on, and a big black screen,
so can someone help me in getting it back to normal, everytime that I tried now with odin to install a different kernel
to make it respond doesnt do anything, it starts the process, but an error 7 come up..:crying:
Please help me, dont know what else to do and I need my cellphone back.
Thanks in advance for your replieS!
Hi guys, I`m new to this forum and I wouldn`t be posting this topic if I found a solution on other forums. If anyone had a problem like mine, or saw a thread before, I would appreciate if you pasted a link to the solution, or gave some kind of advice.
First of all, I`m new to rooting, custom roms, etc., so I guess that whatever I did, it was my fault. I got this Galaxy S2 (GT-I9100) as a gift, and since i already had a phone, I wanted to take a risk and take a shot at installing a lollipop rom. I watched a few tutorials, it seemed simple enough, so i thought why the hell not, but in the process something went wrong...
Sooo... here is what I`ve done:
1.) Rooted my phone with VROOT
2.) Flashed custom recovery with ODIN. I`m not sure which version of CWM it was, 6.0.4.5 I think (the file is named CWM KitKar compatible-I9100). When I flashed CWM, my phone didn`t boot up. All I got was a Samsung Galaxy logo and a yellow triangle for a few seconds before my screen went black again, but I could still access both recovery mode and download mode using the combination of keys.
3.) And then I did what I think screwed up my phone. I thought maybe flashing a lollipop rom through recovery would solve the issue (maybe the recovery is incopatible with my older stock rom and it`s the reason why my phone isn`t booting). So i flashed CM12 from galaxys2root.com. It`s called CM12.1S ROM for Galaxy S2 GT-I9100 (Andorid 5.1)
Not only it didn`t solve my problem, I still can`t get my phone to boot (now I get a samsung logo and a yellow triangle, but screen doesn`t go black after a few seconds, I left it in this state till the battery ran out and still nothing). And on the top of all things, I can`t get my phone to recovery mode anymore, all I get is the yellow triangle. I can still get it into download mode, but it doesn`t connect with my PC anymore. It charges, but I can`t connect it with ODIN anymore. And the weirdest thing is, when I connect it to PC, my other USB port goes crazy and disconnect my USB Wi-Fi adapter
What went wrong? Any advice is highly anticipated. :good: