Hey there!
I've got a little problem with my SGS2... it seems that I have two recoveries installed on my phone which seem to start up as they wish.
First I've got an (orange I think) 4.x version which seems a bit buggy and where I can't seem to choose zips on the internal sd.
Then there's the (blue I think) 5.x version which I preferably would like to use.
Normally the 4.x version starts up when rebooting from Rom Manager. Often when I use reboot in the 4.x version it jumps to the 5.x version. I can't seem to find a consistent behaviour so it's hard to describe what happens. Also I didn't intend to have a dual recovery... this just appeared out of the blue some day.
I didn't manage to flash the newest Miui 2.7.6: shortly after the system is fully running it crashes and the phone reboots. I couldn't find other people with this issue so my first guess is to resolve my recovery issues...
Any ideas?
Yes
Stop rebooting to recovery from rom manager. If you use the button combination you should get your blue recovery.
Thanks for the hint!
But are there still two recoveries located on my phone? Could this cause any problems?
get rid
I'm pretty sure I've read that rom manager has caused quite a few problems with the sII, I'd just delete the app and do without.
I'll definitely do that... I haven't heard too many good things about it actually.
However, there's really something wrong here. I tried to flash recovery touch.. the first time it said it installed fine but actually nothing happened. The second time I tried, right after the install the touch version was running. When I do a reboot though it's not there anymore. What to do?!?
Recovery is built into the kernel. If you flash a recovery independent of the kernel, it will only persist until the next reboot. If you want touch recovery, find a kernel with touch recovery (quite a few have it, search the development forums to find one you like).
So Rom Manager tempers with the kernel when flashing a new recovery?
Or is it some kind of temporary thing like when I flashed recovery within recovery?
Thanks for the replies... I'm interested to learn more about this stuff!
please do not use rom manager
it has bricked many s2
Related
I have been flashing roms for at least a year now with no problems. For some reason, recently I can flash some roms fine and some roms only boot loop or boot freeze. I am currently using Bamf SoaB v1.0. when I tried to flash iBolt v0.90 the most I can get is to the MUIU boot screen and it either boot loops or freezes. I can boot OMFG roms and others fine as well and have ran into other roms that boot loop and freeze also. I have even had an issue with recovery boot looping in the middle of trying to load a rom or wipe. I have tried different Recoveries with no luck. I am wiping everything every time I flash. I even returned to stock Ruu with S-on and rerooted and no luck. Does anyone have any ideas?
Did you check the md5 of the file? Maybe it was a bad download
Update to newest CWM and use newest recovery or use 3.0.2.5 that was always a great one for flashing with no issue or boot loops.
If I helped you in any way please use the thank you button.
1) you aren't wiping (probably not the case since you've done this b4)
2) bad/corrupt rom download (check md5 as suggested)
3) recovery borked causing failures (reflash newest recovery)
4) recovery outdated and those roms require an updated version (reflash newest recovery)
5) your phone doesn't like the kernel and/or default clock speeds of the rom you are flashing (use different rom or flash a different kernel immediately after the rom *YMMV*)
.
.
.
15) hardware failure (get new phone) *not really failure, just not living up to potential*
All that is meant by the dots is to indicate that there are a few other things to check before settling on it being a hw problem but I can't think of any right now.
After eliminating the likely causes described above, you may want to check your recovery log immediately after you flash. Export the log to the sd card, then examine the log file from your computer.
I am a frequent rom flasher, and I have had issues with bad nand blocks only being a problem to me with select roms and not others. Little bit of weirdness.
I have not received my thunderbolt yet, so I am only assuming that htc designed the internal and sd memory in your phone in a similar manner to my sexy nexy. Please correct me if I am wrong!
Sent from my Nexus One using xda premium
Thanks for all the help. The issue seemed to be a kernal problem. At least with ibolt it was. Sad thing after all that work and time and losing everything on my SD I ended up not caring much for the rom. lol At least I know what to try if the problem happens on other roms.
I lurked around the GlitchV13 forum for a good long time and didn't find an answer to this.. and because I've only been lurking for about a year I wasn't able to post anything, so it's about time I guess.
I'm having problems with the GlitchV13 kernel. Maybe I'm just being dumb and don't see something here. some help would be greatly appreciated.
I flashed GlitchV13 on my CM7.1 using CWM 5.0.2.7. No problems at all. Running great for two days. Suddenly, my phone won't connect to wifi. Cycled airplane mode and nothing popped up, so I did a reboot.. annnd got stuck in a bootloop between the CM splash and my lockscreen (wtf). Rebooted again, and now I'm stuck on the CM7 screen. Tried to Odin CWM4, still no bueno, and I get a "E:Can't mount recovery/log/"blahblahblah.
Admittedly, this happened one time before- I did a clean install from stock. Then I got gutsy and flashed GV13 again. Any idea why this is happening? After I flashed Glitch I didn't touch any other recoveries, nor did I try to push anything with Odin or Heimdall.
I really just don't wanna flash back to stock again, and a new solution to why this is happening would be super!
Thanks in advance.
EDIT: Got it. Glitch comes packaged with 4.x CWM, while CM7 comes packaged with 5.0.2.7. Any way to reconcile the two? Worth it to push 4.x over 5.x, flash Glitch then backup so I don't have to do a full restore to CM7?
I had the wifi problem on the stock kernel once, so I dont think that problem is with Glitch.
I also just flashed the latest kernel version and they have updated CWM to 5.0.2.7.
That being said are you sure the recovery is making this much trouble on the phone? Usually it doesn't make a difference (besides backups and whatnot).
The glitch recovery has a few extra features that the CM7 recovery does not.
one being able to wipe dalvik and cache at the same time. (very minor but its more convenient)
I personally think its worth it.
Hey all,
I'm very new to Cyanogen, so sorry if this is a very n00b question.
The ROM Manager doesn't appear to work. It keeps telling me I'm not running ClockWorkMod recovery, and cannot connect to the web to download. I purchased the premium version thinking it would solve this (as well as to support the dev), but no luck. Is it just an issue with the nightlies not capable of handling ROM manager yet, or is it a setting of some sort that I'm neglecting? It's not a huge deal, but it looks like such a nice, simple way to stay up-to-date with the nightly builds as opposed to updating through CWM, wiping, etc.
I saw a post mentioning to go into developer tools and enable root access. The closest I found was in settings and I allowed apps and ADB root access, but this didn't help.
Any suggestions would be greatly appreciated, thanks!
I'm a bit confused, Why do you require ROM manager? The CWM that is built in with the ICS Kang releases should be doing everything that is required, then again, your reply would matter.
I think I am having the same issue. When I try to Flash ClockworkMod Touch in Rom Manager it keeps telling me I need to first install ClockworkMod Recovery even though I have Recovery 5.5.0.4 currently installed. It did the same thing when I had Recovery 4.0.0.4 installed.
I even tried to "Flash ClockworkMod Recovery" (First option in ROM Manager) and it does nothing.
Any ideas?
BEcause the same menu is in the CWM recovery lol
I'm following one of the threads that updates the kang build every 3 days, and as opposed to having to boot through CWM, wipe, install, then re-install apps and replace widgets, I thought I could update through ROM Manager instead.
It sounds like Sn0warmy and I are having similar issues.
From what I've heard the ROM Manager doesn't really work for the tab yet. If you want to update without replacing all your apps you can just flash the zip file in CWM without doing a wipe. If it causes problems then you could do a wipe & reflash afterwards.
Dolfan058 said:
I'm following one of the threads that updates the kang build every 3 days, and as opposed to having to boot through CWM, wipe, install, then re-install apps and replace widgets, I thought I could update through ROM Manager instead.
It sounds like Sn0warmy and I are having similar issues.
Click to expand...
Click to collapse
ROM manager works but it's wonky on the ICS kangs. It doesn't do anything that you can't already do in recovery, so there's no real advantage anyways. Oh, and don't use ROM manager to install a new recovery, and CWR touch doesn't work for the GT10.
^You saved me the trouble of insisting Why thank you good sir.
Thanks for the replies. I'll keep updating through CWM.
Coffeebeans, obviously I'm following your thread (thanks for the good work!) and I tried flashing over once but I got a ton of process media FCs so I figured wiping was the best way to go and have done so ever since. Probably should invest in titanium backup at this point so I don't have to reinstall from market everytime I wipe.
Thanks again for the help y'all.
It worked once with 4/17 build of CM9. After that, it has never worked again. It boots into recovery and pretends its flashing, but stops half a second later and restarts.
Something odd happened today when I tried to update. It rebooted and phone locked up and screen went black. I took out the battery and put it back in then held up and power to go into CWM. All of a sudden Rom Manager took over and flashed the rom as well as the additional zips successfully and rebooted. Everything works.
CWM tries to flash from /emmc. Rom Manager tries to flash from /sdcard and fails. It may be due to the swapped mount points on CM9. in CWM they are still swapped, even if you check the use internal storage box and everything shows up properly in CM9.
Hi all
ok so i'm a bit nervous writing this expecting all manner of attack in that i may be posting something that's been posted before lol, i've been working on this phone from start to finish about 9 hours, over two days..... i've googled just about every combination of words to do with the title and everything in between but nothing seems to come close to what i actually need to do as nothing works
i have an LG Optimus 2x / p990, it had ICS on it but was far too slow to handle this, it needs something a bit less hardware intensive to run smoothly, so i went ahead an found cyanogenmod stable ...... 7.2 i installed sdk after an hour of finding out how it works i finally got adb and fastboot working, i then needed this, that, this, that, etc etc etc.....
to cut a 9 hour story short, i've managed to get myself to the point where i wiped the phone of everything but CWM partioned for ics via the AIO software but CWM will not let me install any ROM onto the phone. to be more precise it says i have installed CM 7.2 successfully! (i've tried this via the CWM via external SD card and sideload) i reboot the phone it's as if i've never done a thing, no trace or suggestion i've even attempted it on the internal card... nothing
i'm at the point now where i'm quite happy to just have my phone back now and install ICS 404 but can't use the LG kdz install software as the pc doesn't see the phone as an LG p990 because it's recovery and i can only get it to come up as internal and external memory cards
i'm not really a noob when it comes to tech stuff but this little phone has me stumped.... please, i'm begging you, help me any operating system that can get my phone working will do, preferably the CM 7.2 if not back to ICS 404?
and i know, i know i should have backed up but i had no idea it could be so complicated just to put an OS on a tiny computer
ETA i've tried that exitrecovery.zip thing and it did nothing :/
It's quite simple
Try to reset and unroot/re-lock the phone then unlock and root, then what you need to do is get ROM Manager and get the Clockwork Recovery and the version that supports your device, although you might need to hook up your phone to your computer for the process to work.
Also put back in ICS 4.0.4 when unrooted and re-locked again like stock and make sure it's the stock file for your phone.
And after you got ROM Manger and the Clockwork Recovery
Then just in Clockwork wipe out all data on the device and don't do a factory reset in Android just with clockwork and delete everything that was made on that phone then install CyanogenMod.
After that it will seem to take a long time or just a while to boot up and then it boots faster then the original ROM.
If you have Clockwork Recovery just wipe out all the data while it's still in there and you should be set.
When it was my first time putting in CyanogenMod it was 10.1 RC1 on my Nexus 7 and it didn't work and forever bootlooped, and that was because i forgot to wipe the device. Then after going into Recovery with Clockwork I deleted all the data of my tablet and it worked but took 5 mins. to boot up which is nomal.
And if Clockwork doesn't work, do the same with TWRP (Team Win Recovery Project) and download that which can be found here teamw.in/project/twrp
If you don't want to get ROM Manager or that one isn't working then try this website to get Clockwork because it has the whole list of devices and I recommend downloading from the website instead of their app. clockworkmod.com/rommanager
cheers for that, i've tried all of the above still to no avail, having a think about it the phone is partioned for ics, i'm trying to install CM 7.2 which as i understand isn't ICS so.... maybe the error is that it's a different partioning sequence/setup i'm gonna go for CM 10.1 and see if that makes a difference.
to add i'm not sure why everyone rants and raves about CWM, TWRP seems much more complete and advanced do you (or anyone else) know the main differences?
twelfty said:
cheers for that, i've tried all of the above still to no avail, having a think about it the phone is partioned for ics, i'm trying to install CM 7.2 which as i understand isn't ICS so.... maybe the error is that it's a different partioning sequence/setup i'm gonna go for CM 10.1 and see if that makes a difference.
to add i'm not sure why everyone rants and raves about CWM, TWRP seems much more complete and advanced do you (or anyone else) know the main differences?
Click to expand...
Click to collapse
TWRP has a completely touch driven interface that is 100% themeable, while CWM has a touch version and non-touch version. Also TWRP has a built in file manger and terminal emulator where as CWM does not. A lot of people like TWRP because it provides a lot of good features with a simple and straightforward yet powerful user interface. I would recommend taking a look at this guide if you want more information on the differences between the two http://www.droidiser.com/2013/04/twrp-vs-clockworkmod-recovery.html?m=1.
Sent from my SCH-I535 using xda premium
ok i managed to do it i can't remember exactly how but some good links and info for anyone who stumbles across this in need of help
i went for cyanogenmod 10.1 to make this work i used this AIO tool - http://forum.xda-developers.com/showthread.php?t=2020737
repartioned with OLD partion layout and BL
installed TWRP (included in the aio)
if you need to reinstall the google play store make sure you have right version if you flash it and get "unfortunately setup wizard has stopped" repeatedly you have the wrong version see this link for which one you need http://wiki.cyanogenmod.org/w/Gapps
obviously make sure you have adb and fastboot setup and drivers too.... it's a long process installing the entire sdk, personally for flashing this once and most definately not inclined to do it again i'd go with just the adb and fastboot rather than the whole sdk
also i found a keyboard error with 10.1 where i'd type 1,2 or 3 characters and the keyboard would minmise not sure if there's a proper fix (i found one thing where you disable the autocorrect but didn't want to do that) so i decided to download and install hackers keyboad which is based on the gingerbread keyboad and is much better and comes with full features and integrates nicely
coupled with the info above from YoyoscratchMC and you should be in the field
good luck to all i was ready to jump out my window with my phone first so i could land as hard as possible on it last night but i got there in the end lol
New to this - I really apologize if this has been covered before but I've been searching all evening and not coming up with a definitive answer.
What's the easiest way to remove a custom recovery (like twrp) and go back to stock? Still on the stock rom, just have custom recovery. I manually deleted a nandroid backup using a file manager from my sd card yesterday, and now when booting into recovery it sits on the twrp screen for easily 10-15 minutes. I can't fathom why that would have an effect on the start up time but that's all I can think of that changed. I've tried re-installing twrp via goomanager - no change.
Is there a way to do so without using usb? I'm curious because the first S4 I had, the usb port went bad after only a month and I was in a panic that I wouldn't be able to get it back to stock (until I finally got it to work long enough to flash it with odin). Really don't want to risk that happening again.
Looking to run some roms once I think I understand at least half of what I'm doing, but trying to be cautious. I'd like to keep twrp but I want to make sure it's working right by loading a clean install of it.
Thanks in advance.
A lot of users are experiencing the lag with TWRP version installed by Goo Manager - (TWRP 2.6.0).
The link below has a flashable zip to version 2.5.0.2, this version seems to be stable and doesn't lag at the TWRP screen for most people including myself.
I would try flashing this and I think it will solve your problem.
http://forum.xda-developers.com/showpost.php?p=45006486&postcount=289
gadget! said:
A lot of users are experiencing the lag with TWRP version installed by Goo Manager - (TWRP 2.6.0).
The link below has a flashable zip to version 2.5.0.2, this version seems to be stable and doesn't lag at the TWRP screen for most people including myself.
I would try flashing this and I think it will solve your problem.
http://forum.xda-developers.com/showpost.php?p=45006486&postcount=289
Click to expand...
Click to collapse
Thank you. I'm a little stumped on what to do with the zip now that I have it though and all my searching for "loading recovery with goo manager" just shows the method to load the newer version. Or if you're supposed to load it via pc, what do you use? Odin doesn't like any of those file types.
Sorry if this is a dumb question. Probably just not searching for the right thing.
bretbretterson said:
Thank you. I'm a little stumped on what to do with the zip now that I have it though and all my searching for "loading recovery with goo manager" just shows the method to load the newer version. Or if you're supposed to load it via pc, what do you use? Odin doesn't like any of those file types.
Sorry if this is a dumb question. Probably just not searching for the right thing.
Click to expand...
Click to collapse
You flash it via recovery. Put in your sdcard/internal boot to recovery amd use the install zip option. Navigate to where it is and flash away.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk. now Free
bretbretterson said:
Thank you. I'm a little stumped on what to do with the zip now that I have it though and all my searching for "loading recovery with goo manager" just shows the method to load the newer version. Or if you're supposed to load it via pc, what do you use? Odin doesn't like any of those file types.
Sorry if this is a dumb question. Probably just not searching for the right thing.
Click to expand...
Click to collapse
Yes, it is a flashable zip, just flash it in the recovery you have now.
I found this post based on the OP's original question, "how to remove TWRP recovery".
I have been flashing rooted ROMs for a while now via ODIN, but am just now starting to foray into the realm of custom recoveries. Before I install TWRP though, I wanted to know how to remove it just in case something ever goes wrong. That is, I've been avoiding the use of a custom recovery so far because if something ever happened to my device, I could just flash the stock ROM, and having already used Triangle Away, Samsung will never be the wiser and would service my device, but with a custom recovery installed, they would be able to see I'm not running totally stock.
So, is there a way to completely return my device to 100% stock after installing TWRP? And if so, how would I go about doing that?
My device is a Samsung Galaxy Note 10.1 GT-N8013, currently running a root injected stock ROM, 4.1.2
EDIT: I just noticed that this is in the S4 forum, which my N8013 obviously is not, but the answer to my question should be the same regardless, yes?
margentieri said:
I found this post based on the OP's original question, "how to remove TWRP recovery".
I have been flashing rooted ROMs for a while now via ODIN, but am just now starting to foray into the realm of custom recoveries. Before I install TWRP though, I wanted to know how to remove it just in case something ever goes wrong. That is, I've been avoiding the use of a custom recovery so far because if something ever happened to my device, I could just flash the stock ROM, and having already used Triangle Away, Samsung will never be the wiser and would service my device, but with a custom recovery installed, they would be able to see I'm not running totally stock.
So, is there a way to completely return my device to 100% stock after installing TWRP? And if so, how would I go about doing that?
My device is a Samsung Galaxy Note 10.1 GT-N8013, currently running a root injected stock ROM, 4.1.2
EDIT: I just noticed that this is in the S4 forum, which my N8013 obviously is not, but the answer to my question should be the same regardless, yes?
Click to expand...
Click to collapse
Answer would be device specific
Sent from my cm_tenderloin using xda app-developers app
Thanks Gadget, Hex. TWRP 2.5.0.2 works great. But just for future reference, is the only way to revert to the stock recovery by flashing a stock device image via odin over usb? So if the USB port were to fail entirely, I would be SoL - correct?