EVO 3D Wont boot ICS Sense Roms - HTC EVO 3D

I have an EVO 3D, Sprint CDMA. I can boot CM9 and AOKP just fine, but Sense 3.6 and Sense 4.0 will boot to the lockscreen on the rom and keep rebooting non-stop. Any help would be appreciated.

Are you s-on our s-off? I recommend being s-off to fix most bootlooping issues.
Sent from my ICS 3VO with Tapatalk 2

coal686 said:
Are you s-on our s-off? I recommend being s-off to fix most bootlooping issues.
Sent from my ICS 3VO with Tapatalk 2
Click to expand...
Click to collapse
I'm s-on, never got around to downgrading or that other method. When I had my other 3d I could flash sense 4 with no issues though.

Airo18 said:
I'm s-on, never got around to downgrading or that other method. When I had my other 3d I could flash sense 4 with no issues though.
Click to expand...
Click to collapse
What recovery are you using? Is best to use 4ext and do a superwipe before installing. S-on is okay but use 4ext
Sent from my PG86100 using xda premium

Airo18 said:
I have an EVO 3D, Sprint CDMA. I can boot CM9 and AOKP just fine, but Sense 3.6 and Sense 4.0 will boot to the lockscreen on the rom and keep rebooting non-stop. Any help would be appreciated.
Click to expand...
Click to collapse
whats the name of the AOKP roms that worked , and if u are on hboot 1.53.007 roms with custom kernels dont work , they should be based on custom htc ics kernel which is 3.0.16 u need to s-off to fix it , hit the thanks if i helped

metro77279 said:
What recovery are you using? Is best to use 4ext and do a superwipe before installing. S-on is okay but use 4ext
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Always use 4ext, bought the app to install off the market

elias17 said:
whats the name of the AOKP roms that worked , and if u are on hboot 1.53.007 roms with custom kernels dont work , they should be based on custom htc ics kernel which is 3.0.16 u need to s-off to fix it , hit the thanks if i helped
Click to expand...
Click to collapse
On my other 4d I had s-on with hboot 1.5 and they booted up

Airo18 said:
On my other 4d I had s-on with hboot 1.5 and they booted up
Click to expand...
Click to collapse
I do think it is phone dependent. Some people are able to boot ICS on the 3d with 1.5 s-on and others get nothing but bootloops. Maybe your first phone was more forgiving than this one.

coal686 said:
I do think it is phone dependent. Some people are able to boot ICS on the 3d with 1.5 s-on and others get nothing but bootloops. Maybe your first phone was more forgiving than this one.
Click to expand...
Click to collapse
I was just wondering about the reboots. Thanks for the help
Sent from my Galaxy Nexus using xda app-developers app

Just posted about mildly the same issue along with the S-OFF 'Wire Trick.' I assumed the ICS ROM's were bootlooping because of S-ON so I used the 'Wire Trick' to obtain S-OFF. I was successful with absolutely no issue, using ViperROM in the process. I'm about to try and install an ICS ROM as we speak.
EDIT: Just flashed MeanROM and it worked perfect after obtaining S-OFF and the phone claiming to be 'LOCKED.' Do the Wire Trick and you'll be fine

Delakit said:
Just posted about mildly the same issue along with the S-OFF 'Wire Trick.' I assumed the ICS ROM's were bootlooping because of S-ON so I used the 'Wire Trick' to obtain S-OFF. I was successful with absolutely no issue, using ViperROM in the process. I'm about to try and install an ICS ROM as we speak.
EDIT: Just flashed MeanROM and it worked perfect after obtaining S-OFF and the phone claiming to be 'LOCKED.' Do the Wire Trick and you'll be fine
Click to expand...
Click to collapse
What kind of wire do I use?

Airo18 said:
What kind of wire do I use?
Click to expand...
Click to collapse
I think it has to be insulated, but I did read of some guy doing it in his office using a paper clip. This thread has more info.
http://forum.xda-developers.com/showthread.php?t=1585846
Sent from my ICS 3VO with Tapatalk 2

I used a paperclip wrapped in electrical tape. Make sure you don't touch the actual clip while performing the trick. It could potentially harm your device.
Sent from my PG86100 using xda app-developers app

Delakit said:
I used a paperclip wrapped in electrical tape. Make sure you don't touch the actual clip while performing the trick. It could potentially harm your device.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Someone mentioned they bricked their device doing the trick. Maybe that's how.
EDIT: I meant by touching the paper clip without using electrical tape.

coal686 said:
Someone mentioned they bricked their device doing the trick. Maybe that's how.
Click to expand...
Click to collapse
Thanks for the help, think i'll stick to my Nexus though

Related

How to upgrade to ics?

Got a evo 3D as a present and since I have my s2 I wanna mess with this phone. I have 2.3.4 I unlocked it rooted it and it's s- on. I tried to install meanrom ics but it just got stuck in the HTC logo. Any solutions?
Sent from my SGH-T989 using xda premium
The ics Roms tend to cause bootloops for most phones with s-on, so I recommend getting s-off. The easiest way is to use the wire trick.
http://forum.xda-developers.com/showthread.php?t=1585846
Sent from my ICS 3VO with Tapatalk 2
Not sure if I wanna try the wire trick too risky lol is there anyway to get ics on s- on? I remember doing it for my amaze but I got rid of it.
Sent from my SGH-T989 using xda premium
Jaimesco12 said:
Not sure if I wanna try the wire trick too risky lol is there anyway to get ics on s- on? I remember doing it for my amaze but I got rid of it.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
You could downgrade your hboot, which is what I did, but that is risky too because you have to purposely soft brick your phone. HTC does not make it easy to get s-off.
http://forum.xda-developers.com/showthread.php?t=1653777
Sent from my ICS 3VO with Tapatalk 2
Jaimesco12 said:
Not sure if I wanna try the wire trick too risky lol is there anyway to get ics on s- on? I remember doing it for my amaze but I got rid of it.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
coal is right the wire trick is easier to do if all youre looking for is the s-off...ive performed that just to try it and the downgrade ...both work but the ease of the wire trick is uncomparable
Jaimesco12 said:
Got a evo 3D as a present and since I have my s2 I wanna mess with this phone. I have 2.3.4 I unlocked it rooted it and it's s- on. I tried to install meanrom ics but it just got stuck in the HTC logo. Any solutions?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I'm currently using
http://forum.xda-developers.com/showthread.php?t=1493082
I'm also S-ON Hboot1.5.. the other by deviltoast gives me bootlopp.
cedsays said:
I'm currently using
http://forum.xda-developers.com/showthread.php?t=1493082
I'm also S-ON Hboot1.5.. the other by deviltoast gives me bootlopp.
Click to expand...
Click to collapse
Thanks but it's still in alpha so ill stay away from it any others that work on s- on and I don't want to perform the wire trick i had a difficult time making it work for my amaze when I had it
Sent from my SGH-T989 using xda premium
Hold on, are you GSM or CDMA?
If you're GSM, when flashing an ICS ROM, you will need to manually flash the boot.img from fastboot using CMD..
No I have the cmda sprint one
Sent from my SGH-T989 using xda premium
Jaimesco12 said:
No I have the cmda sprint one
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I would think that the same applies for a CDMA phone.
Look at the page where you downloaded the ROM, does the dev provide you with a boot.img file? (Usually firmware file)
If so, you could probably flash it manually.
No, it doesn't say I'm trying to flash meanrom ics
Sent from my SGH-T989 using xda premium
Jaimesco12 said:
No, it doesn't say I'm trying to flash meanrom ics
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Before you Install, prepare:
2.17.651.5 ROMs need the latest firmware. See freeza's all in one firmware update if you haven't done that already. If you unlocked via the HTC method, you know the drill: you'll have to take the OTA and then re-unlock.
If you are already running an older version of MeanROM, you should be OK just flashing this ROM without a full wipe, BUT...
If you have any trouble at all, do a super wipe and then install the above firmware and this ROM
Go to "Menu", "Settings", "Power" and UNcheck "Fast Boot". When you reboot or power off the phone, you really want it to reboot/power-off. This can save you a lot of headaches.
Click to expand...
Click to collapse
Find this in the OP for MeanROM.
Okay I'm s-on and I've learned all the tricks for hboot 1.5. To get meanrom ics running on your 3d, you need to flash the boot.IMG through fastboot. It's the easiest way I've found. In the meanrom.zip there should be a file called boot.IMG. extract that to where your adb and fastboot drivers are. Then cd/ to the files with your adb and fastboot drivers. Next 'adb reboot boatloader' to go to fastboot. When in fastboot, type 'fastboot flash boot boot.img'. then, since you have already flashed the Rom 'fastboot boot boot.img' to reboot your phone.
There are other ways to do flash the boot.img, but I prefer to use fastboot.
Hope this helps
DjDom said:
Find this in the OP for MeanROM.
Click to expand...
Click to collapse
Lol im just gonna do the wire trick what can i use a paperclip?
Jaimesco12 said:
Lol im just gonna do the wire trick what can i use a paperclip?
Click to expand...
Click to collapse
You can use a paperclip, however, you CANNOT do the wire trick unless you are running a stock ROM.
Must be stock Gingerbread.
And, if you plan on using a paperclip, wrap it in some kind of Tape so static electricity doesn't go from you to the phone.
Use masking tape, worked for me.
im running meanrom the gingerbread one and i have a backup for stock can i just do the backup and do it like that?
Jaimesco12 said:
im running meanrom the gingerbread one and i have a backup for stock can i just do the backup and do it like that?
Click to expand...
Click to collapse
Restore the backup. It has to be stock GB.
Then you should be OK.

Hboot 1.58 vs Hboot 1.4

I'm on hboot 1.58.5858 s-off. I did.the wire trick and used the custom hboot. I tried flashing cm10 and I got a boot loop.
My question is if I change to hboot 1.4 will cm10 boot and which hboot is better?
Sent from my HTC EVO 3D using xda app-developers app
Yes and 1.4.
The 1.58 hboot causes bootloops on CM Roms. You need to downgrade to 1.4 which is simple since you are s-off. It really is a good hboot as you can flash anything except the new HTC kernel.
Read, Search, Read again, ... Then Ask with Tapatalk 2
coal686 said:
Yes and 1.4.
The 1.58 hboot causes bootloops on CM Roms. You need to downgrade to 1.4 which is simple since you are s-off. It really is a good hboot as you can flash anything except the new HTC kernel.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Click to expand...
Click to collapse
Is the new kernel faster than the old? I don't want to downgrade if my phone were to slow down.
Sent from my PG86100 using xda app-developers app
kevin130 said:
Is the new kernel faster than the old? I don't want to downgrade if my phone were to slow down.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Afaik, there are no benefits that anyone's found to running the new HTC kernel over the vm leak kernel. There are other kernels like Mac that are nice, but they run on the older hboot too.
The thing is, you can go back to 1.58 anytime you want since you are s-off.
Read, Search, Read again, ... Then Ask with Tapatalk 2
coal686 said:
Afaik, there are no benefits that anyone's found to running the new HTC kernel over the vm leak kernel. There are other kernels like Mac that are nice, but they run on the older hboot too.
The thing is, you can go back to 1.58 anytime you want since you are s-off.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Click to expand...
Click to collapse
Okay thanks. If you can give me the link to the vm leak kernel that would be awesome. I'll flash that with the cm10 ROM.
Sent from my awesome HTC EVO 3D Using the XDA app.
kevin130 said:
Okay thanks. If you can give me the link to the vm leak kernel that would be awesome. I'll flash that with the cm10 ROM.
Sent from my awesome HTC EVO 3D Using the XDA app.
Click to expand...
Click to collapse
I think the vm kernel is for sense Roms. Just run the kernel that comes with the Rom or try the Mac kernel.
Read, Search, Read again, ... Then Ask with Tapatalk 2
coal686 said:
I think the vm kernel is for sense Roms. Just run the kernel that comes with the Rom or try the Mac kernel.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Click to expand...
Click to collapse
Okay. I'm running Cool ICS Rom. If I downgrade, will I downgrade the kernel as well? Or will it just not boot at all?
Sent from my awesome HTC EVO 3D Using the XDA app.

Updated radios with s-on

Hey guys where can I find the updated radios with s-on?
Sent from my EVO using Tapatalk 2
If you're S-On you cannot flash new radios at the moment without taking the OTA or flashing the RUU.
muffinhunter said:
If you're S-On you cannot flash new radios at the moment without taking the OTA or flashing the RUU.
Click to expand...
Click to collapse
ok thanks and is there a way to get S-Off with the latest OTA?
The only way to get s-off is to get a phone with hboot 1.12 and applying the lazy panda exploit
om4 said:
The only way to get s-off is to get a phone with hboot 1.12 and applying the lazy panda exploit
Click to expand...
Click to collapse
thanks for your help and i have HBOOT 1.12.0000. so can i use lazy panda?
Yep just head on over to development and look through the guide. If you have any trouble with any of the terms or would just like to read up before jumping into the a-off guide, I wrote a pretty extensive post explaining just about everything I could think of.
om4 said:
Yep just head on over to development and look through the guide. If you have any trouble with any of the terms or would just like to read up before jumping into the a-off guide, I wrote a pretty extensive post explaining just about everything I could think of.
Click to expand...
Click to collapse
Thanks man and I was just over there earlier today and I wasnt sure if I met the requirements but I just want to make sure what I am doing before I do a dangerous thing to my phone. Well I mean its not dangerous but it can damage your phone if your not careful. Cause I am still a noon at this type of stuff but when it comes flashing a Rom and mods and stuff I can do that but other then that I am still learning everyday about this stuff but sorry for the long post. Thank you for all your help today
Sent from my EVO using Tapatalk 2
sully9292 said:
Hey guys where can I find the updated radios with s-on?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
If your s-on with hboot 1.12 you CAN flash New radios through the recovery. But only the radio. To do the rest you need to be s-off
Sent from my EVO using xda app-developers app
bog3nator said:
If your s-on with hboot 1.12 you CAN flash New radios through the recovery. But only the radio. To do the rest you need to be s-off
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Thanks and I'm going to put s off tomorrow
Sent from my EVO using Tapatalk 2

How to Root a HTC 3d hboot 1.58.000

I got my wifey phone that she wants rooted I have unlocked it one time n put meanrom on it n all it did would keep rebooting over n over idk what I did wrong n I had s-on instead of s-off maybe that's where I went wrong or the rom was trying to put on it was for the wrong hboot but if anyone can help me out this n if there is any jelly bean roms out yet that I can put on it n she running the newest ics from sprint
Sent from my SPH-L710 using xda app-developers app
galaxys3man30 said:
I got my wifey phone that she wants rooted I have unlocked it one time n put meanrom on it n all it did would keep rebooting over n over idk what I did wrong n I had s-on instead of s-off maybe that's where I went wrong or the rom was trying to put on it was for the wrong hboot but if anyone can help me out this n if there is any jelly bean roms out yet that I can put on it n she running the newest ics from sprint
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
AOSP ROMs wont boot on hboot 1.4. youd have to get S-Off and downgrade. Its probably not booting cuz you didnt turn smart flash on 4ext reccovery. If you dont have the recovery install it. 4ext.net Acheiving s-off is easy. Use the wire trick.
kevin130 said:
AOSP ROMs wont boot on hboot 1.4. youd have to get S-Off and downgrade. Its probably not booting cuz you didnt turn smart flash on 4ext reccovery. If you dont have the recovery install it. 4ext.net Acheiving s-off is easy. Use the wire trick.
Click to expand...
Click to collapse
OK thx bro ibwoupd thank but im out thanks for today lol I will thank it tomorrow n but I have hboot 1.58.0000 what Rom will work for that or do I have to down grade to 1.3?
Sent from my SPH-L710 using xda app-developers app
No problem. If you want to use the latest ICS kernel that you would want to stay on 1.58. If you want AOSP ROMs then you would have to downgrade to 1.4. If you want to downgrade you are going to have to get s-off.
Sent from my PG86100 using xda app-developers app
She wants jelly bean if its out yet I've haven't really looked for yet but if I got it unlocked n s off is rooted for to do any rom I want to put on it
Sent from my SPH-L710 using xda app-developers app
kevin130 said:
AOSP ROMs wont boot on hboot 1.4.
Click to expand...
Click to collapse
kevin130 said:
If you want AOSP ROMs then you would have to downgrade to 1.4.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Just to clarify a typo, you need a non 1.58 hboot to boot aosp jb ROMs. I recommend 1.4 as Kevin does. Have you seen ramjet's easy guide to s-off?
http://forum.xda-developers.com/showthread.php?t=1889438
coal686 said:
Just to clarify a typo, you need a non 1.58 hboot to boot aosp jb ROMs. I recommend 1.4 as Kevin does. Have you seen ramjet's ready guide to s-off?
http://forum.xda-developers.com/showthread.php?t=1889438
Click to expand...
Click to collapse
Thanks for clearing that up. Didn't know 1.5 worked too.
Sent from my PG86100 using xda app-developers app
kevin130 said:
Thanks for clearing that up. Didn't know 1.5 worked too.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Now that you mention it, I'm not sure about 1.50. I know it works for 1.4 Revolutionary, so I'd just go with that one.
coal686 said:
Now that you mention it, I'm not sure about 1.50. I know it works for 1.4 Revolutionary, so I'd just go with that one.
Click to expand...
Click to collapse
Yes, GB and AOSP ROM's boot with 1.5. Details in this thread.
ramjet73
Noob question, where can i find 1.58? Burnt out trying to look for it.....
Sent from my PG86100 using xda app-developers app
supahero00 said:
Noob question, where can i find 1.58? Burnt out trying to look for it.....
Click to expand...
Click to collapse
Here.
ramjet73
I'm using 1.5, works fine and well.
airs0ft3r said:
I'm using 1.5, works fine and well.
Click to expand...
Click to collapse
That depends on what ROM you want to run. Some current Sense ROM's like Viper3D and Cool ICS won't boot without the 1.58 or JuopunutBear 1.58.5858 hboot installed.
ramjet73
i have 1.58 and using 4Ext touch recovery program
problem flah htc evo 3d
Hello I' ve a problem with my htc evo 3d. Some days ago I unloked my terminal with htc dev. After i flashed a recovery and Virtuous rom. Now the problem.... i tryed to change the rom but the terminal turn on, show me thre htc write and turn of. I did't know the problem. I can only enter in recovery mode...somebody can halp me??? tnx

Official Jellybean means changes to AOSP ROMs?

Now that the official JellyBean ROM has been released to our phones, it's only a matter of time before HTC releases the kernel source, will that mean that certain problems (like External SD mount on PC) will be fixed in the AOSP ROMs?
Sent from my EVO using xda app-developers app
Ya does this mean u lose s-off if u update?
Sent from my EVO using xda premium
geek4u86 said:
Ya does this mean u lose s-off if u update?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
You won't lose s-off but you will get that ugly new hboot 2.09
banccalif said:
You won't lose s-off but you will get that ugly new hboot 2.09
Click to expand...
Click to collapse
i think you can quite easily flash back the dirty racun 1.19 HBOOT though
dangle79 said:
i think you can quite easily flash back the dirty racun 1.19 HBOOT though
Click to expand...
Click to collapse
Can't say I'm 1.12 so its nothing I've had to worry about personally but that would be awesome

Categories

Resources