Somebody help me with my issue
I was having RR ROM with Siyah 3.3.3b Kernel and the secondary boot is port JB
I was on the secondary boot and I was restarting I found that the device is crashed
I thought it’s the kernel so I booted the phone to the download mood and flashed a kernel again and its not working also
I tried to add new software from Odin and it was giving me errors like | failed to mount emmc
I searched the internet and by mistake I flashed the device with i9100G PIT files and I re-partitioned the device and also I flashed a new boot loader not only this but also during the flashing process my pc crashed and it restarts leaving my device with no life
I can’t even turn the device on or go to download mood or anything the only thing that let me have a faith that the mobile is still a live that its getting heat while the battery is plugged in
Anyone can help with this?
Hard Brick?
As far a I know flashing a wrong bootloader hard-bricks your phone. the bootloader is what loads first, ans then in turn loads the rest of the system. if your bootloader is broken, it will neither load recovery, DL-Mode nor the system. maybe you can find a solution to this by searching for wrong bootloader or anything of the sort.
if everything fails you would need to get a new motherboard or whatever it is called in an android phone. there are guides in this forum on this, I once used this one: http://forum.xda-developers.com/showthread.php?t=1253969 althogh the photos only seem to work with the old xda2010 theme.
I hope it is not what it looks like and you get your phone up and ruing again.
Bootloader had nothing to do with what went wrong for him. He flashed an I9100G pit file to an I9100.
OP, unfortunately there's nothing you can do at this point short of JTag service, or visiting/sending the phone to a Samsung service center.
find a repair center that preforms jtag near you, it should cost you about 40$
Coirpre said:
As far a I know flashing a wrong bootloader hard-bricks your phone. the bootloader is what loads first, ans then in turn loads the rest of the system. if your bootloader is broken, it will neither load recovery, DL-Mode nor the system. maybe you can find a solution to this by searching for wrong bootloader or anything of the sort.
if everything fails you would need to get a new motherboard or whatever it is called in an android phone. there are guides in this forum on this, I once used this one: http://forum.xda-developers.com/showthread.php?t=1253969 althogh the photos only seem to work with the old xda2010 theme.
I hope it is not what it looks like and you get your phone up and ruing again.
Click to expand...
Click to collapse
thanks for the reply but let me tell you that it has nothing to do with my boot loader I just flashed wrong PIT file
ctomgee said:
Bootloader had nothing to do with what went wrong for him. He flashed an I9100G pit file to an I9100.
OP, unfortunately there's nothing you can do at this point short of JTag service, or visiting/sending the phone to a Samsung service center.
Click to expand...
Click to collapse
remorema said:
find a repair center that preforms jtag near you, it should cost you about 40$
Click to expand...
Click to collapse
am living in Egypt we don't have Jtag services .. i saw what they can make on you-tube and am still in warranty so i don't know what to do should i pass it by the warranty should they let me pay or it will be free ?
From what i've read on this forum its better if you try to send it to samsung for warranty your chances to get it repaired is 50/50 just play dump you have nothing to loose
thanks guys for your reply i think i made an issue with the MB BOIS firmware hence it has to be hard flashed in the warranty so am scheduling the same on next Friday i hope that they will not ask for money as it was on a custom ROM
because here in Egypt Warranty is make fool of us and they always take much money to fix noob issues so guess what they can do regarding mine.
I've got my device from the warranty , its working fine now .. i need to inform you that Warranty in Egypt confirmed that flashing custom ROMs is not voiding the Warranty its just black listing the device in their records .
They are flashing boot loaders smoothly.
Sent from my GT-I9100 using xda premium
moe.nassef said:
I've got my device from the warranty , its working fine now .. i need to inform you that Warranty in Egypt confirmed that flashing custom ROMs is not voiding the Warranty its just black listing the device in their records .
They are flashing boot loaders smoothly.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
u r lucky
its not the same case as evrywhr arnd .. may got the warranty void
i know am lucky lool if any body ia facing the same he/she can ship the device to Egypt and it will get the correct treatment lol
Am proud to have this kind of Samsung store in Egypt
Sent from my GT-I9100 using xda premium
moe.nassef said:
i know am lucky lool if any body ia facing the same he/she can ship the device to egypt and it will get the correct treatment lol
am proud to have this kind of samsung store in egypt
sent from my gt-i9100 using xda premium
Click to expand...
Click to collapse
haha i wish samsung gave international warranrty
neerajganga said:
haha i wish samsung gave international warranrty
Click to expand...
Click to collapse
I'd like to thank you rele for your support in my issue from the beginning.
Sent from my GT-I9100 using xda premium
moe.nassef said:
I'd like to thank you rele for your support in my issue from the beginning.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
haha
cheers mate
glad that ur warranty is not void and u got it fixed
Cheers..!!!
Related
Hello XDA,
I was trying to flash CM9 on my Samsung Galaxy S2, was running Stock ICS XWLP7, successfully flashed it, proceeded to CWM and Wipe Data/Factory Reset unaware of the eMMC Brick Bug, went away during the wipe process, as I came back, I saw that the phone was completely bricked. Download/Recovery Modes don't work, Odin doesn't recognize anything, can't charge phone, the phone is cold and dead. Jig or JTAG don't work either.
btw. I can't get it replaced.
1. Is this the infamous superbrick?
2.If yes, what can I do about it? If no, what is it?
Yes, looks like you've encountered the infamous superbrick
The only way to revive a superbricked phone is to send it to Samsung service center.
Sent from my GT-I9100 using Tapatalk 2
Nexcore said:
Hello XDA,
I was trying to flash CM9 on my Samsung Galaxy S2, was running Stock ICS XWLP7, successfully flashed it, proceeded to CWM and Wipe Data/Factory Reset unaware of the eMMC Brick Bug, went away during the wipe process, as I came back, I saw that the phone was completely bricked. Download/Recovery Modes don't work, Odin doesn't recognize anything, can't charge phone, the phone is cold and dead. Jig or JTAG don't work either.
btw. I can't get it replaced.
1. Is this the infamous superbrick?
2.If yes, what can I do about it? If no, what is it?
Click to expand...
Click to collapse
you were on 4.0.4?
jtag service didn't brought it back to life.
hmmmm...man................cold stuff
gastonw said:
you were on 4.0.4?
jtag service didn't brought it back to life.
hmmmm...man................cold stuff
Click to expand...
Click to collapse
Yes I was, the version mentioned is wrong.
Nexcore said:
Yes I was, the version mentioned is wrong.
Click to expand...
Click to collapse
man, look into hard brick threads, maybe there's a way out.
gastonw said:
man, look into hard brick threads, maybe there's a way out.
Click to expand...
Click to collapse
What ? If it superbricked only help is mb changing
Happy new year
Paulius
Paulius7 said:
What ? If it superbricked only help is mb changing
Happy new year
Paulius
Click to expand...
Click to collapse
i'm trying to give this guy some hope.....it's saturday man.
gastonw said:
i'm trying to give this guy some hope.....it's saturday man.
Click to expand...
Click to collapse
I know dude but there only fix changing mb...
Happy new year
Paulius
Actually it's not my device, it belongs to a friend of mine, he gave it to me to fix it yet I couldn't do it
He can't get it replaced because his warranty is over.
Do your friend had warranty ?
Happy new year
Paulius
Nexcore said:
Actually it's not my device, it belongs to a friend of mine, he gave it to me to fix it yet I couldn't do it
He can't get it replaced because his warranty is over.
Click to expand...
Click to collapse
Then he needs to pay for a motherboard replacement, simple as that.
Also, by the way, why did you create this thread when we already have plenty of this exact topic? You could have diagnosed this easily by looking at one or more of the threads we already have without creating yet another one and waiting for same answers.
Is it insured under home insurance or bank/credit card? Otherwise it's buy a new phone or send back to Samsung for repair and pay. Good luck.
Sent from my GT-I9100 using xda premium
TheATHEiST said:
Then he needs to pay for a motherboard replacement, simple as that.
Also, by the way, why did you create this thread when we already have plenty of this exact topic? You could have diagnosed this easily by looking at one or more of the threads we already have without creating yet another one and waiting for same answers.
Click to expand...
Click to collapse
Because all the fixes were like, flash X from Odin, but the phone doesn't get recognized by Odin.
The phone was bought from Germany, Samsung Turkey refuses to replace it, it must be sent to Germany for replacement.(if possible)
Nexcore said:
Because all the fixes were like, flash X from Odin, but the phone doesn't get recognized by Odin.
The phone was bought from Germany, Samsung Turkey refuses to replace it, it must be sent to Germany for replacement.(if possible)
Click to expand...
Click to collapse
And in those cases the devices were never actually "bricked" at all, those were just n00bs who couldn't fix their system boot problem and like to describe their device as "soft-bricked". In your case your device is actually "bricked" what the n00bs call "hard-bricked" when in reality their is only "bricked". If you can flash via odin or recovery your device is not bricked.
In your case you wiped your device with a buggy kernel (which has been discussed at length as I said) and only option is mobo replacement.
Hello
I was trying to flash jellybean when on ICS 4.0.4, and the screen suddenly turned off. Now it won't start any more.
What can I do?
Thanks..
Use some common sense and be more descriptive if you want help from us.
Which specific rom did you flash?
How did you flash it?
What point did your phone go off?
What kernel did you flash?
What model sgs2do you have?
TheATHEiST said:
Use some common sense and be more descriptive if you want help from us.
Which specific rom did you flash?
How did you flash it?
What point did your phone go off?
What kernel did you flash?
What model sgs2do you have?
Click to expand...
Click to collapse
1. jellybam-5.1.0_i9100.STABLE
2. Using CWM
3. Right after it finished installing
4.The one included
5. i9100
Please help me..
For me it sounds like the eMMc Brick Bug. Atleast the sympom matches the one described here
Read about it. If it the sympoms matches then i might wanna suggest a Jig or JTAG solution. If not then service may be your only option.
My phone got bricked, it's currently in repair. Let's just see how it goes for me, will probably e back this week AND they'd probably figure out that i had it rooted (and thus warranty voided)
Cheers and good luck!
ogitge Acts
WardenBerret said:
For me it sounds like the eMMc Brick Bug. Atleast the sympom matches the one described here
Read about it. If it the sympoms matches then i might wanna suggest a Jig or JTAG solution. If not then service may be your only option.
My phone got bricked, it's currently in repair. Let's just see how it goes for me, will probably e back this week AND they'd probably figure out that i had it rooted (and thus warranty voided)
Cheers and good luck!
Click to expand...
Click to collapse
So you can still get it repaired?
Even if the warranty is voided?
No... If warranty's void they dont repair for free
Sent from my iPhone using Tapatalk
Omaxe said:
No... If warranty's void they dont repair for free
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
How much would it about cost toget it repaired?
Jtag around £25
Mboard around £100 at least.
"noob ok...lazy noob not ok"
so i have a few questions
,first off im not a noobie on the flashing, rooting,unlocking etc , my friend flashed the wrong rom to this phone it appears to have suffered from a hard brick just due to its unresponsiveness. I was wondering if the bootloader files or some sort of files have to be on an sdcard and be placed inside of the phone for a jig to properly work. i ask this because if the phones bootloader is corrupted how is it going to boot any other way. Im trying to avoid this jtagging thing. Any ideas would be helpful or references would also be appreciated.
yes i have a jig, yes ive tried the recovery button, yes i have odin, i also have a external battery charger, etc etc :fingers-crossed:
Sorry. Wrong ROM = JTAG.
.
rangercaptain said:
Sorry. Wrong ROM = JTAG.
Click to expand...
Click to collapse
my phone was hard bricked last week. i sent it to mobiletechvideo to repair
Mobiletechvideos.com
JTAG is the only way back at this point I'm sorry to say ....g
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-jtag-brick-repair/
ugh i was afraid of that thanks guys appreciate it, i figured that would be the solution.
bricked my phone how to send to mobitech videos
Josephchan said:
my phone was hard bricked last week. i sent it to mobiletechvideo to repair
Click to expand...
Click to collapse
i am from india ...
how cani send the bricked phone to mobitech videos...
could u say me the address
sri.nafi said:
i am from india ...
how cani send the bricked phone to mobitech videos...
could u say me the address
Click to expand...
Click to collapse
think this is what you're looking for.
http://mobiletechvideos.mybigcommerce.com/
rangercaptain said:
Sorry. Wrong ROM = JTAG.
Click to expand...
Click to collapse
NVM...was thinking of a jig. That's sucks.
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
Hey guys i have been using my galaxy s2 fo the past one year ..recently its vibration started to act wierd so iswitched it off .. but when i restarted my mobile signal started to dissapear and there is no imei number . evrything is unknown .. i dont know what to do.. I dont know how to root . so i dont know how to fix it as said in other posts .. can any one help me? .. im nooob to android .....!!!:crying::crying:
rythu_u said:
Hey guys i have been using my galaxy s2 fo the past one year ..recently its vibration started to act wierd so iswitched it off .. but when i restarted my mobile signal started to dissapear and there is no imei number . evrything is unknown .. i dont know what to do.. I dont know how to root . so i dont know how to fix it as said in other posts .. can any one help me? .. im nooob to android .....!!!:crying::crying:
Click to expand...
Click to collapse
Spoon feeding is not allowed here.
If you're a Android n00b and want to know how to root or flash custom or stock roms I suggest you do some reading/research. We have plenty of Q&A and guides that cover this.
Asking "how do I root" is a silly question to ask because its already been asked and answered so just look/read.
If you lost somehow your IMEI number(0 under *#06#), rooting the device won't help.
First, before any movement, backup your data and then restore defaults. Maybe it's some king of bug?
Settings->backup &restore -> restore defaults, erase memory.
TheATHEiST said:
Spoon feeding is not allowed here.
If you're a Android n00b and want to know how to root or flash custom or stock roms I suggest you do some reading/research. We have plenty of Q&A and guides that cover this.
Asking "how do I root" is a silly question to ask because its already been asked and answered so just look/read.
Click to expand...
Click to collapse
I kind of understood how to root but i cant understand this flashing rom thingy .. what should i do to just get it fixed? .. im soooo confusedddd . sorrryyy
mar10o said:
If you lost somehow your IMEI number(0 under *#06#), rooting the device won't help.
First, before any movement, backup your data and then restore defaults. Maybe it's some king of bug?
Settings->backup &restore -> restore defaults, erase memory.
Click to expand...
Click to collapse
yea i did type *#06# but imei is not showing up . its empty!! its not a bug. its a corruption in the imei ... i have no idea what to do now
First, relax. Its just a phone.
If the phone is still under warrenty - get it replaced/fixed for free where you bought it from.
If not, try to recover the iemi like it's explained here: http://forum.xda-developers.com/showthread.php?t=1264021
Sent from my digital submersible hovercraft.
f-r said:
First, relax. Its just a phone.
If the phone is still under warrenty - get it replaced/fixed for free where you bought it from.
If not, try to recover the iemi like it's explained here: http://forum.xda-developers.com/showthread.php?t=1264021
Sent from my digital submersible hovercraft.
Click to expand...
Click to collapse
thing is its hard to relax because i dont have an altrenative phone and it costed me a lot . my warranty just got over a few days ago another problem ........
well i checked out the link . but i dont get the cmd, adb shell part .. the whole 8th point i dont get it ???.
If you don't get it, there isn't anything further anyone here can do to help you. Send it to a Samsung service centre/authorised repairer, or ask local mobile repair shops. This is not something you're going to fix yourself.
MistahBungle said:
If you don't get it, there isn't anything further anyone here can do to help you. Send it to a Samsung service centre/authorised repairer, or ask local mobile repair shops. This is not something you're going to fix yourself.
Click to expand...
Click to collapse
hmmm.. well i went to them . they asked me to change the motherboard whith a total cost of 800 dhs.. which my parents wont give
CMD is command line - like MSDOS or Linux terminal. ADB is not something that you'll get by asking questions and getting answers, you need to read about it and understand it. It will take you a couple of days to figure it out.
I'd try going to several different phone shops/labs. Hopefully they will diagnose the problem without replacing the entire PCB. It's worth a shot.
If every shop says that you must replace the board, ask around. Maybe one of your friends knows someone who is able to fix this.
From what you described it seems like water damage or other hardware fault.
Sent from my digital submersible hovercraft.
f-r said:
CMD is command line - like MSDOS or Linux terminal. ADB is not something that you'll get by asking questions and getting answers, you need to read about it and understand it. It will take you a couple of days to figure it out.
I'd try going to several different phone shops/labs. Hopefully they will diagnose the problem without replacing the entire PCB. It's worth a shot.
If every shop says that you must replace the board, ask around. Maybe one of your friends knows someone who is able to fix this.
From what you described it seems like water damage or other hardware fault.
Sent from my digital submersible hovercraft.
Click to expand...
Click to collapse
hey thanx .. okay so i guess im gona root my phone now...can u post a reliable working steps on how to root ? because i read many posts and pepole say som have bricked their phone or aint working properly....
rythu_u said:
hey thanx .. okay so i guess im gona root my phone now...can u post a reliable working steps on how to root ? because i read many posts and pepole say som have bricked their phone or aint working properly....
Click to expand...
Click to collapse
If you want anyone to -try to- help you get your phone back you should at least consider searching for easy questions.
Check what ROM you are on and perform a search at xda or google (or both).
Now, are you sure warranty is voided? if it was 2 years you still got time....If you root your devices, warranty will be off the table for you.
Seat back and get you sh*t together, take a long breath and then report back to see what's up.
Sent from the little guy
Finally rooted my phone using framaroot
and all problems solved:victory:
rythu_u said:
Finally rooted my phone using framaroot
and all problems solved:victory:
Click to expand...
Click to collapse
Hi all,
I have exactly the same issue on my Galaxy S2 on Vodaphone in the UK. It's out of warranty and not rooted. I did an IOS upgrade to ICS v4.0.3 and at that point it shows no signal and the IMEI no. is blank after dialing *#06#. Somehow it has lost/corrupted the IMEI no. during the upgrade.
Is the only way to recover the IMEI no. to root the phone? Or is there another method?
Thanks all!
An iOS upgrade ? No wonder you borked your IMEI
Go to Samfirmware, find the latest stock rom for your carrier/country. Flash it with Odin. How ? Search/read/learn. If you're lucky, yours is a case where the IMEI disappearing is a transient thing & doing a 'good' flash of stock (as opposed to the update that obviously barfed in some way - I presume you're talking about an OTA update as opposed to something you did manually ?) might well fix the problem. We've seen a number of similar problems on here lately.
If you're unlucky, you're SOOL & it ain't coming back. Rooting it isn't going to magically fix it unless you have an EFS backup, which you won't have if you're someone who's never rooted their phone. Take it to a local mobile repair shop, they may be able to help. A Samsung service centre/authorised repairer will also fix it for you regardless of the warranty status, they'll just charge you more than a local mobile shop who isn't an authorised Samsung repairer will, likely.
Thank you for your response! I took the S2 to a phone repair shop, the guy tried flashing it back to stock IOS but this failed. He ended up replacing the motherboard, all fine now. Would like to find out the safest way to upgrade the IOS to Jelly Bean now, it's currently running Gingerbread v2.3.3. Any advice appreciated, in the meantime will do some reading up.
Thanks all, great forum!
Explorer.net said:
Thank you for your response! I took the S2 to a phone repair shop, the guy tried flashing it back to stock IOS but this failed. He ended up replacing the motherboard, all fine now. Would like to find out the safest way to upgrade the IOS to Jelly Bean now, it's currently running Gingerbread v2.3.3. Any advice appreciated, in the meantime will do some reading up.
Thanks all, great forum!
Click to expand...
Click to collapse
Okay i might be able to help you .but tell me your model number ......
if its GT-I9100 then you can update easily ,but if its gt-i9100G or smoething else,im nt sure i cn help .. u might have to do some readings ..
The model is GT-I9100, I managed to successfully upgrade the IOS to 4.1.2 using Kies. Perhaps I should've done that first time around instead of selecting Settings-About Device-Software Update over Wifi - which resulted in the phone losing it's IMEI no.
Many thanks for the replies!
okay dude .. enjoy your JB ...
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash the rom again with Odin.
Sent from my Nexus 7 using xda premium
Correct s3 ???
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash again - but be 100% certain the ROM you are using is for the precise version of S3 that you have!
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
JJEgan said:
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
Click to expand...
Click to collapse
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
kofiaa said:
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Unfortunately after trying a method that we know nothing about that is often copied from XDA but missing vital facts .
jje
source of the problem found
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
Does not happen if you read and understand first .
jje
nope .. its still not working..
khairulpetrcech said:
nope .. its still not working..
Click to expand...
Click to collapse
Looks like a paid for repair .
But first just try flashing stock firmware via Odin .
jje
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
chris151722 said:
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
Click to expand...
Click to collapse
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
khairulpetrcech said:
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
Click to expand...
Click to collapse
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
your awesome !
chris151722 said:
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
Click to expand...
Click to collapse
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
khairulpetrcech said:
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
Click to expand...
Click to collapse
:good: glad i have help you out..
chris151722 said:
:good: glad i have help you out..
Click to expand...
Click to collapse
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
khairulpetrcech said:
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
Click to expand...
Click to collapse
Yes within the 2years warranty period..
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
khairulpetrcech said:
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yes try the kies method first before sending for repair.
but i dont think it will solve by kies update if you got the brick by flashing wrong cfautoroot.
maybe if you got the brick from flashing rom maybe it can be fix,
---------- Post added at 07:15 PM ---------- Previous post was at 07:08 PM ----------
t3chjunkie said:
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
Click to expand...
Click to collapse
you dont have warranty on your phone? if you have, you dont have to pay for service repair for it in claiming warranty.